Relevant bibliographies by topics / Micro-holes

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Micro-holes'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Micro-holes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Micro-holes"

1

Udroiu, Razvan. "A Quality Analysis of Micro-Holes Made by Polymer Jetting Additive Manufacturing." Polymers 16, no. 1 (2023): 32. http://dx.doi.org/10.3390/polym16010032.

Full text
Abstract:
Material jetting technology is gaining popularity, especially in polymer science, because of their high accuracy for additive manufacturing (AM) products. This paper aims to investigate the quality of micro-holes that are oriented in three basic directions, and manufactured by the material jetting AM process. This paper proposes a novel methodology to evaluate the accuracy of micro-holes features by using a transparent artifact. A test artifact with horizontal and vertical micro-holes in it, with industrial applications, was designed. Micro-holes were placed on planar and curve surfaces. Sampl
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Yung-Yi, Tzu-Wei Huang, and Dong-Yea Sheu. "Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool." Micromachines 11, no. 7 (2020): 675. http://dx.doi.org/10.3390/mi11070675.

Full text
Abstract:
Tungsten cemented carbide (WC-Co) is a widely applied material in micro-hole drilling, such as in suction nozzles, injection nozzles, and wire drawing dies, owing to its high wear resistance and hardness. Since the development of wire-electro-discharge grinding (WEDG) technology, the micro-electrical discharge machining (micro-EDM) has been excellent in the process of fabricating micro-holes in WC-Co material. Even though high-quality micro-holes can be drilled by micro-EDM, it is still limited in large-scale production, due to the electrode tool wear caused during the process. In addition, th
APA, Harvard, Vancouver, ISO, and other styles
3

Agafonova, Vera. "Analysis of micro-holes shape in a textile terminal using optical microscopy." MATEC Web of Conferences 265 (2019): 01018. http://dx.doi.org/10.1051/matecconf/201926501018.

Full text
Abstract:
Currently, development and improvement of ventilation and air conditioning systems efficiency is related with the use of new devices for air transportation and distribution. These include micro perforated air distributors made of textile which are installed both at the level of the indoor working area and directly near the workplace. Air terminals of this type are made of polymer composite material – fabric based on synthetic fibers. To make such a fabric, modern laser technology to produce micro-holes is used which allows burning in the fabric holes of a given diameter and pitch with melted e
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Linfang, Lijuan Zheng, Cheng yong Wang, et al. "Experimental study on micro-drills wear during high speed of drilling IC substrate." Circuit World 40, no. 2 (2014): 61–70. http://dx.doi.org/10.1108/cw-11-2013-0048.

Full text
Abstract:
Purpose – Compared with the traditional printed circuit board (PCB) drilling process, the technology of drilling IC substrate is facing more problems, such as much smaller hole diameter, more intensive hole space, thinner sheet and more complicated materials are drilled in process. Moreover, the base material of IC substrate is different from traditional PCB, more kinds of fillers added in IC substrate which make the drill worn seriously during drilling process. Micro-drills wear and micro holes quality are the most important questions when drilling IC substrate so far. Wear morphology of micr
APA, Harvard, Vancouver, ISO, and other styles
5

Zhu, Guo Zheng, Ji Cheng Bai, Yong Feng Guo, Peng Ju Hou, and Chao Jiang Li. "Research on Micro EDM Machine Tool for Machining Micro Array Holes." Advanced Materials Research 472-475 (February 2012): 2401–4. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2401.

Full text
Abstract:
As demands for the micro array holes in modern industry and the characteristics of micro Electrical Discharge Machining (micro EDM), a new type micro EDM machine tool used to machine micro array holes was designed and manufactured. The machine tool contains following systems: the mechanism system, the control system, the pulse generator system and other auxiliary systems. Each system was studied respectively. Base on a large number of experiments, finally, a sample with 256 array holes was processed by the machine tool. The diameter of single hole is 45µm and precision of the holes is ±1µm. Th
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Lei, Xiao Wen Cao, Deng Peng Huang, Dong Wei Ran, Shuo Tian, and Hui Chao Sun. "Investigation of Micro Holes Fabricated by Femtosecond Laser on S136." Applied Mechanics and Materials 727-728 (January 2015): 205–8. http://dx.doi.org/10.4028/www.scientific.net/amm.727-728.205.

Full text
Abstract:
Femtosecond laser is now widely used in micro holes drilling because of its unique advantages, such as high efficiency, high precision and non-contact. Femtosecond laser is the best choice to fabricate micro holes. This paper makes a systematic study of the influence of laser power and number of pulses on diameter and depth of micro holes on S136 die steel through the focusing lens with focal length of 35 cm. A series of high-precision micro holes with different diameter and depth are fabricated. The relationship between the dimension of fabricated micro holes and the process parameters is det
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Han Song, Dong Meng, Guo Qian Wang, and Yong Bin Zeng. "Electro-Chemical Micro Drilling by Micro-Spherical Electrode." Advanced Materials Research 1089 (January 2015): 324–30. http://dx.doi.org/10.4028/www.scientific.net/amr.1089.324.

Full text
Abstract:
Manufacture of micro holes in difficult-to-machine material is very difficult, electro-chemical machining (ECM) is one of the more appropriate approach. However, micro holes fabricated using ECM can have different diameters at the entrances and exits and such tapering effect is not localized. In this work, a new ECM method named electro-chemical micro drilling (ECMD) for machining high quality straight micro holes in difficult-to-machine material was introduced, and the micro-spherical electrode fabricated by a hybrid technique combining micro-ECM with one pulse electro discharge (OPED) was us
APA, Harvard, Vancouver, ISO, and other styles
8

Cai, Hui Tao, and Yong Liu. "Research on Optical Feature Recognition Technology of Multiple Micro-Holes." Advanced Materials Research 852 (January 2014): 373–77. http://dx.doi.org/10.4028/www.scientific.net/amr.852.373.

Full text
Abstract:
A rapid quality detection system for multiple micro-holes fabricated by electrochemical machining (ECM) is proposed by studying on the optical features of multiple micro-holes. First, the edge of multiple micro-holes is detected exactly with the digital image processing techniques. Second, the multiple micro-holes are recognized through image skeleton extraction and region segmentation algorithm. Then, the least square circle fit arithmetic; the new roundness measurement algorithm and the surface roughness measurement method are synthetically used in the processing of geometric feature recogni
APA, Harvard, Vancouver, ISO, and other styles
9

Yuan, Chenhu, Zenggan Bian, Yue Cao, et al. "Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling." Micromachines 16, no. 7 (2025): 811. https://doi.org/10.3390/mi16070811.

Full text
Abstract:
In the present study, the coaxial waterjet-assisted nanosecond laser drilling of micro-holes in Cf/SiC composites, coupled with nanosecond laser drilling in air for fabricating micro-holes with high aspect ratios, were investigated. The surface morphology, reaction products, and micro-hole shapes were thoroughly examined. The results reveal that, for the coaxial waterjet-assisted nanosecond laser drilling of micro-holes in the Cf/SiC composite, the increasing of waterjet velocity enhances the material removal rate and micro-hole depth, but reduces the micro-hole diameter and taper angle. The c
APA, Harvard, Vancouver, ISO, and other styles
10

Jia, Bao Xian, Dong Sheng Wang, Zhen Long Wang, and Wan Sheng Zhao. "Experiment Study of Combining Micro EDM with USM." Key Engineering Materials 375-376 (March 2008): 248–52. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.248.

Full text
Abstract:
Experiments of combining micro EDM with USM are carried out to enhance the machining ability and flexibility of the micro EDM, improve the machining state, and increase the productivity and aspect ratio of the micro holes. Basing on RC pulse power supply and workpiece vibration, the micro holes are drilled. The results of comparing experiments indicate that in the processes of both micro EDM without USM and micro EDM with USM, the machining velocity and the wear of the electrode increase with the increase of open voltage and loop capacitance. The experiment results of amplitude influencing on
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Micro-holes"

1

Zhang, Yan. "Inkjet etching of micro-via holes in thin polymer layers." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/14201.

Full text
Abstract:
Facilitated by the development of various direct-write techniques and functional polymeric materials including polymer based conductors and semiconductors, printed electronics are flourishing both commercially and as a research topic. This is not only because of their simpler manufacturing routes and lower cost, but also as a result of lower processing temperatures and better compatibility with flexible substrates, compared with conventional electronics. The development of conventional electronics has been guided by Moore s Law, the driver for which lies in the demand for electronic devices wi
APA, Harvard, Vancouver, ISO, and other styles
2

Powell, Rock Allen. "On-line depth measurement of micro-scale laser drilled holes." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2009. http://scholarsmine.mst.edu/thesis/pdf/Powell_09007dcc806b6dfc.pdf.

Full text
Abstract:
Thesis (M.S.)--Missouri University of Science and Technology, 2009.<br>Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed August 14, 2009) Includes bibliographical references (p. 16-17).
APA, Harvard, Vancouver, ISO, and other styles
3

Moreno, Oscar Ray. "Investigation and development of oil-injection nozzles for high-cycle fatigue rotor spin test." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2005. http://library.nps.navy.mil/uhtbin/hyperion/05Mar%5FMoreno.pdf.

Full text
Abstract:
Thesis (M.S. in Mechanical Engineering)--Naval Postgraduate School, March 2005.<br>Thesis Advisor(s): Raymond Shreeve, Garth Hobson. Includes bibliographical references (p. 91-93). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, Shou-Wei, and 陳紹維. "Studies on Manufacturing Electrode and Micro Holes with Micro-EDM." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/95950124339812497007.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>95<br>This research utilizes 4-axis EDM machine to discussion and carry out experiment . This research is divided into three stages to proceed： Initial stage：Measuring the 4-axis EDM machine properties and doing experiment to investigate discharge gap and wear of electrode . Middle stage：Manufacturing electrode with bulk electrode . Last stage： Studying the white layer of a surface machined by micro-EDM . From the experimental results , the size of discharge gap is proportional to the peak current and pulse duration . And the electrode wear is proportio
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Yi-Cheng, and 陳易呈. "An Investigation of Micro Molding for Micro Through Holes Plates." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/52156717125549652416.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>91<br>In this study, UV-LIGA technique was developed to fabricate the micro mold for inkjet print nozzle plates. Such micro molding process to manufacture nozzle plates is expected to substitute the existing laser machining method because of lower cost of molding machines. Number of innovative idea are implemented into mold design, manufacture and molding process. Micro core pins were made by the UV-LIGA process and were used as electrodes to create micro holes in the following EDM process. Since micro holes were made by the micro core pins, it ensured the ali
APA, Harvard, Vancouver, ISO, and other styles
6

Hung, Jung-Chou, and 洪榮洲. "Study of Micro-holes Machining Using Micro-EDM Combined with Electropolishing." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/85012304866525743115.

Full text
Abstract:
碩士<br>國立中央大學<br>機械工程研究所<br>92<br>Abstract Micro-holes with diameter less than 100μm can be effectively fabricate by micro-EDM in micro-machining. But using micro-EDM to manufacture micro-holes on metal plate, the recast layer include micro-crack and crater was formed on the hole-wall will lead to poor surface roughness to affect quality of micro-hole seriously. For this reason, the Hymu-80 was chosen as the workpiece material in this study, using micro-EDM combined with electropolishing to machine micro-holes. It expected to improve the quality of micro-holes after EDM to satisfy the precision
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Sen-De, and 王森德. "A Research on Technology of Micro Noncircular Holes and Micro Forming." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/61633949002015540462.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>91<br>Machining of micro and precise holes is a key point of developing new products in various fields of industry. We study and discuss three kinds of technology of noncircular micro-holes. Vibration-EDM: Because the tool is motionless when machining noncircular micro-hole, so we must use vibration-EDM technology to machine noncircular die-hole, and introduce the technology that can increase the rate of machining and obtain more discharged energy to remove the workpiece in order to machine noncircular die-hole. Micro punching technology: The noncircular die-hole
APA, Harvard, Vancouver, ISO, and other styles
8

Chu, Wen-Chang, and 朱文章. "The Etching Holes Effects on Capacitive Micro-Devices." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/23572789268871368086.

Full text
Abstract:
碩士<br>國立臺灣大學<br>應用力學研究所<br>100<br>In many MEMS devices, movable suspension structure is the most important design to achieve sensing or actuating function. Etching the sacrificial layer under the microstructure is a common method to release structure. For the device which has large area, it is necessary to design a large number of etching holes to enable the etchant to etch sacrificial layer completely. However, the etching holes will result in many physical characteristics changes. For capacitive micro-devices, etching holes cause the decreasing of capacitance and induce fringe capacitance, w
APA, Harvard, Vancouver, ISO, and other styles
9

Mishra, Himanshu. "Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes." Thesis, 2017. http://ethesis.nitrkl.ac.in/8496/1/2017-PhD-HMishra-511ME134.pdf.

Full text
Abstract:
Based on the experimental results, an analysis was made to identify the performance of various electrodes during fabrication of micro holes considering Inconel 718 as well as titanium as workpiece materials. It was found that that platinum followed by graphite and copper as electrode material exhibited higher MRR for both the workpiece materials but on the other hand platinum showed higher values of OC, RCL and TA respectively when compared to graphite and copper. The variation of temperature distribution in radial and depth direction with different process parameters has been determined for I
APA, Harvard, Vancouver, ISO, and other styles
10

Liang, Hui-Yuan, and 梁輝源. "Fabrication of matrix Micro-Holes Using A Hybrid Process Integrated Micro-EDM and Micro-punching." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/14712930379376368115.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>91<br>This paper describes a hybrid process system to integrate of micro-electro discharge machining (micro-EDM) and micro-punching that uses electrode arrays to achieve high throughput and in the machining. It explores constraints on the fabrication and usage of high aspect ratio micro-EDM fabricated electrode arrays. An array of 36 WC electrodes with 90 μm diameter was used to machine perforations in 100μm thick Cu plank.The electrode arrays can be applied to micro-punching that be used to punching with thermo-plastic material.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Micro-holes"

1

Porter, Robert D. How to make a super sensitive micro drill press to drill very small holes. s.n.], 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Porter, Robert D. How to make a super sensitive micro drill press to drill very small holes. s.n.], 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lin, Li, and Mechanical Engineering (M.M.T.)., eds. Study and evaluation of key technologies used to produce high precision orifice micro-holes on metallic substrates for large scale production. UMIST, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Micro-holes"

1

Nagrale, M. S., and S. A. Mastud. "Micro-Electrical Discharge Machining for Machining Micro-Holes." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9099-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Debnath, Tapas, and Promod Kumar Patowari. "Drilling an Array of Square Micro-holes Using Micro-EDM." In Advances in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0124-1_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Abhinav, Deepak Kumar, and Nirmal Kumar Singh. "Fabricating Micro-Holes Through Micro-EDM Process and Their Circularity Testing." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4606-6_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wadia, Spenta R. "Micro-Structure of Black Holes and String Theory." In Black Holes, Gravitational Radiation and the Universe. Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-017-0934-7_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jia, Bao Xian, Wan Sheng Zhao, Fang Sun, and Zhen Long Wang. "Experimental Study of Micro Holes Machining by USM." In Materials Science Forum. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-421-9.21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nguyen, T. D., V. M. Volgin, and V. V. Lyubimov. "Simulation of Electrical Discharge Machining of Micro-holes." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22063-1_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sathiyaraj, S., S.Venkatesan, Binson Mathew, K. K. SimsarulHaq, and Prince Kumar. "Production of ECMM Micro-Holes on Brass C35335." In Springer Proceedings in Materials. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-6875-2_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kar, Siddhartha, Pallab Sarmah, Binoy Kumar Baroi, and Promod Kumar Patowari. "Drilling of Micro-holes in Titanium Using Micro-EDM: A Parametric Investigation." In Advances in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0124-1_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Debnath, T., K. K. Patra, and P. K. Patowari. "Gang Drilling of Square Micro-Holes on Glass Using USM." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9471-4_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Haoqiu, and Jinwu Wu. "Acoustic Performance Analysis of Micro-Perforated Panels Combined Acoustic Black Holes." In Springer Aerospace Technology. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3240-4_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Micro-holes"

1

Cheng, Chung-Wei, and Yang-Chang Hou. "Laser Polishing of Micro-Holes in Quartz." In 2024 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2024. http://dx.doi.org/10.1109/cleo-pr60912.2024.10676577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Anguiano-Lasso, Mariana, Héctor Santiago-Hernández, Azael Mora-Nuñez, et al. "All-POF Spectral Filter Based on In-Line Holes." In Latin America Optics and Photonics Conference. Optica Publishing Group, 2024. https://doi.org/10.1364/laop.2024.tu4a.23.

Full text
Abstract:
We propose a spectral filter using a plastic optical fiber with micro-holes, offering a low-cost, robust, and highly reproducible solution. Transmission traces show a spectral blue shift in peak transmission at 587 nm, 567 nm, 556 nm, and 536 nm for fibers with zero, one, two, and three holes, respectively. The filter displays a bandpass period of approximately 120 nm. Additionally, we compare transmissions with holes spaced at 1 cm and 500 µm apart, finding that the hole spacing does not affect the spectral transmission. By filling the holes with glucose solutions of varying concentrations to
APA, Harvard, Vancouver, ISO, and other styles
3

Odong, Patrick, Wongani Moyo, Ahmed H. Abd El-Malek, Ahmed Allam, Asano Tanemasa, and Adel B. Abdel-Rahman. "Resonance Cavity-Based Detection of Micro-Holes in Gas Pipes Using a Metasurface-Integrated Ultrawideband Antenna." In 2024 12th International Japan-Africa Conference on Electronics, Communications, and Computations (JAC-ECC). IEEE, 2024. https://doi.org/10.1109/jac-ecc64419.2024.11061225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

DVALI, GEORGI. "PHYSICS OF MICRO BLACK HOLES." In Quantum Mechanics, Elementary Particles, Quantum Cosmology and Complexity. WORLD SCIENTIFIC, 2010. http://dx.doi.org/10.1142/9789814335614_0033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dausinger, Friedrich. "Drilling of high quality micro holes." In ICALEO® 2000: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 2000. http://dx.doi.org/10.2351/1.5059414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yanwu Liu, Dongsheng Qu, and Xing Wu. "Positioning for array micro-holes punching." In 2011 6th International Forum on Strategic Technology (IFOST). IEEE, 2011. http://dx.doi.org/10.1109/ifost.2011.6021048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Flores, A., C. Amon, T. Shih, D. Davis, and B. Willis. "Boundary-layer bleed through micro holes." In 37th Aerospace Sciences Meeting and Exhibit. American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Babu, B. Selva, S. Sathiyaraj, Y. Libin, M. S. Mithun, and K. Midhun. "Production of ECMM micro holes on brass Cz108." In 11TH ANNUAL INTERNATIONAL CONFERENCE (AIC) 2021: On Sciences and Engineering. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0111032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hayakawa, Tomohiko, Kenichi Murakami, and Masatoshi Ishikawa. "Precise shape-sensing method using micro pinhole for micro holes (Conference Presentation)." In Smart Structures and NDE for Industry 4.0, edited by Norbert G. Meyendorf and Dan J. Clingman. SPIE, 2018. http://dx.doi.org/10.1117/12.2295543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Yiquan, Wanwu Hou, Jinkai Xu, and Huadong Yu. "A comparative investigation of drilling and milling micro holes using micro-EDM." In 2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2016. http://dx.doi.org/10.1109/3m-nano.2016.7824956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Micro-holes' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography