To see the other types of publications on this topic, follow the link: Micro metals.

Journal articles on the topic 'Micro metals'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Micro metals.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

KELLY, D. "Metals and micro-organisms." Trends in Biotechnology 8 (1990): 271–72. http://dx.doi.org/10.1016/0167-7799(90)90191-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Luo, Liang, Zheng Yi Jiang, Dong Bin Wei, and Xiaofeng He. "Study on Micro Hydroforming of Metals." Advanced Materials Research 887-888 (February 2014): 1133–38. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.1133.

Full text
Abstract:
Micro hydroforming has an ability to manufacture complex 3D micro parts at a high production rate and has drawn increasing attentions. Brief understanding of macro hydroforming, for instance, deep drawing, is necessary to understand the principle of micro hydroforming. Then, special phenomena, such as size effects, occurred at micro scale are discussed and the related theories explaining these phenomena are introduced. Based on the similarities and differences between micro and macro hydroforming, experiments and simulation which consider the size effects are reviewed.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhao, Wanqin, Haodong Liu, Xiaowei Shen, Lingzhi Wang, and Xuesong Mei. "Percussion Drilling Hole in Cu, Al, Ti and Ni Alloys Using Ultra-Short Pulsed Laser Ablation." Materials 13, no. 1 (2019): 31. http://dx.doi.org/10.3390/ma13010031.

Full text
Abstract:
Comparative study on micro-deep hole drilling by picosecond ultra-short pulse laser in four metals, including copper, aluminum alloy, titanium alloy, and nickel alloy, was presented. Destructive testing was performed to measure the depth, shape, and side-wall morphology of micro-deep holes in this study. Diameters and depths of micro-deep holes in four metals ablated using the same processing parameters were compared. The multiple thresholds of metals had been calculated. Relationships between hole dimensions and multiple thresholds (the average ablation threshold, the ablation threshold and t
APA, Harvard, Vancouver, ISO, and other styles
4

Stojadinovic, Stevan. "Plasma electrolytic oxidation of metals." Journal of the Serbian Chemical Society 78, no. 5 (2013): 713–16. http://dx.doi.org/10.2298/jsc121126129s.

Full text
Abstract:
In this lecture results of the investigation of plasma electrolytic oxidation (PEO) process on some metals (aluminum, titanium, tantalum, magnesium, and zirconium) were presented. Whole process involves anodizing metals above the dielectric breakdown voltage where numerous micro-discharges are generated continuously over the coating surface. For the characterization of PEO process optical emission spectroscopy and real-time imaging were used. These investigations enabled the determination of electron temperature, electron number density, spatial density of micro-discharges, the active surface
APA, Harvard, Vancouver, ISO, and other styles
5

Wierzbicka, Małgorzata, Agnieszka Abratowska, Olga Bemowska-Kałabun, et al. "Micro-Evolutionary Processes in Armeria maritima at Metalliferous Sites." International Journal of Molecular Sciences 24, no. 5 (2023): 4650. http://dx.doi.org/10.3390/ijms24054650.

Full text
Abstract:
Tolerance to heavy metals in plants is a model process used to study adaptations to extremely unfavorable environments. One species capable of colonizing areas with high contents of heavy metals is Armeria maritima (Mill.) Wild. A. maritima plants growing in metalliferous areas differ in their morphological features and tolerance levels to heavy metals compared to individuals of the same species growing in non-metalliferous areas. The A. maritima adaptations to heavy metals occur at the organismal, tissue, and cellular levels (e.g., the retention of metals in roots, enrichment of the oldest le
APA, Harvard, Vancouver, ISO, and other styles
6

Dumontet, S., H. Dinel, M. Schnitzer, T. Paré, and A. Scopa. "Composting organic residues: Trace metals and microbial pathogens." Canadian Journal of Soil Science 81, no. 3 (2001): 357–67. http://dx.doi.org/10.4141/s00-077.

Full text
Abstract:
Industrialized societies are responsible for increasing environmental pollution by trace metals, and pathogenic micro-organisms associated with products and wastes of industrial processes and agricultural production, as well as household activities. The objective of this paper is to discuss the effect of composting on the behavior of trace metals and pathogenic micro-organisms, and to present the latest finding on sanitizing and stabilizing organic fractions and trace metals in composted biosolids. Evidence provided by long-term scientific studies in North America and Europe on toxic effects o
APA, Harvard, Vancouver, ISO, and other styles
7

Jonathan, Nelson, Kolo Babagana, Usman Bala, and Yayi Adamu Esther. "Determination of Heavy Metals in Soil from Bokkos and Mangu Local Government Areas of Plateau State, Nigeria." Chemistry Research Journal 1, no. 4 (2016): 30–34. https://doi.org/10.5281/zenodo.13971470.

Full text
Abstract:
This study was conducted at Bokkos and Mangu local government areas of plateau state, Nigeria. Soil sample at varying depth(0 – 10 cm, 10 – 20 cm and 20 - 30 cm)were analyzed for heavy metals. This is to ascertain the effect of leaching in heavy metals concentration at various soil depths and to understand the phenomenon of heavy metals accumulation in plants. Soil samples were collected at six different locations (Batura, Mangor, Mbar, Kirang, Ampang and Bwai) in the two study areas. The samples were digested and analyzed for Cr, Ni, Cu, Mn, Fe, Zn and Pb Using standard procedures
APA, Harvard, Vancouver, ISO, and other styles
8

Mahmoud, A. Dar, A. M. Khalafallah Ahmad, M. Tawfik Kawthar, and R.N. Samman Marina. "The Interactions of Bioactive Heavy Metals between Avicennia marina (Forsk.) Vierh. and the Underlying Sediments in the Mangrove Swamps, Red Sea, Egypt." Chemistry Research Journal 2, no. 6 (2017): 25–43. https://doi.org/10.5281/zenodo.13935787.

Full text
Abstract:
Mangrove swamps have unique biogeochemical interaction between the plant and the underlying sediments. The bioactive heavy metals; Zn, Cu, Fe, Mn, Pb, Ni, Cd and Co were measured using Atomic Absorption Spectrophotometer (AAS) in the bulk sediment samples and the fine fractions; 125&micro;, 63&micro; and &lt;63&micro; and slack water as well as different parts of the <em>Avicennia marina</em> mangrove (fruits, leaves and roots) collected from 9 mangrove swamps at the nearshore zone of the Red Sea. The average percentage of the fine sediment group (125&micro; + 63&micro; + &lt;63&micro;) was va
APA, Harvard, Vancouver, ISO, and other styles
9

Nyirő, József. "Micromachining of micro and ultrafine-structured metals." Periodica Polytechnica Mechanical Engineering 53, no. 2 (2009): 81. http://dx.doi.org/10.3311/pp.me.2009-2.05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

HAKAMADA, Masataka. "Plastic Deformation of Micro- and Nanoporous Metals." Journal of the Japan Society for Technology of Plasticity 52, no. 611 (2011): 1306–7. http://dx.doi.org/10.9773/sosei.52.1306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Zhao, Jingwei, Haibo Xie, Haina Lu, and Zhengyi Jiang. "Size effects in micro rolling of metals." IOP Conference Series: Materials Science and Engineering 282 (December 2017): 012013. http://dx.doi.org/10.1088/1757-899x/282/1/012013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Vainshtein, A. A. "Relationship between micro- and macrostresses in metals." Strength of Materials 26, no. 4 (1994): 303–10. http://dx.doi.org/10.1007/bf02207411.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Ishaleku, Y. Y., A. C. Etonihu, and D. Uzama. "Assessment of Accumulation of Heavy Metals in Vegetables Irrigated with Water from Amba Stream in Lafia, Nasarawa State, Nigeria." CONTINENTAL J. ENVIRONMENTAL SCIENCES 11, no. 1 (2018): 1–13. https://doi.org/10.5281/zenodo.1170638.

Full text
Abstract:
<em>Vegetable uptake of metals is one of the major pathways soil metals enter into the food chain and the subsequent bio-accumulated risks to human health when plant based food stuffs are consumed. This study assessed the impact of water from Amba Stream in Lafia, Nasarawa State used for irrigation. For the soil and sediment, the mean organic matter was 1.04 and 0.81% respectively. The mean pH of soil, sediment and water were 8.8, 7.1 and 6.9 respectively, while the moisture contents were 91.62 and 87.34% for soil and sediment, respectively. As expected, the soil sample had the highest concent
APA, Harvard, Vancouver, ISO, and other styles
14

Siddique, M. A. M., and M. Aktar. "Heavy metals in salt marsh sediments of Porteresia bed along the Karnafully river coast, Chittagong." Soil and Water Research 7, No. 3 (2012): 117–23. http://dx.doi.org/10.17221/7/2012-swr.

Full text
Abstract:
Heavy metal (Cu, Zn, Cd, Pb and Fe) concentrations in salt marsh sediments of the Karnafully River coast were investigated in this study. Sediment samples of four different sites were analysed for selected heavy metals by AAS (atomic absorption spectrophotometry). The mean values of heavy metals were 45.79 &amp;micro;g/g for Cu, 105.0 &amp;micro;g/g for Zn, 0.43 &amp;micro;g/g for Cd, 26.70 &amp;micro;g/g for Pb and 3297.38 &amp;micro;g/g for Fe in this study. It is observed that Pb and Cu have positive correlations (r = 0.370, P &amp;lt; 0.05) and Fe and Zn have negative correlations (r = &am
APA, Harvard, Vancouver, ISO, and other styles
15

Daniel, E. Enenche, and Abdulmumuni Sumaila. "Appraisal of heavy metal contents in soils using different digestion methods." Pharmaceutical and Chemical Journal 3, no. 2 (2016): 201–6. https://doi.org/10.5281/zenodo.13754003.

Full text
Abstract:
The concentration of some heavy metals (Fe, Cu, Zn, Cr, Pb, Ni, Cd) were analysed in soils in and around Keteren-Gwari Mechanic village, Minna metropolis, Niger State, North-central Nigeria using Atomic Absorption Spectroscopy (AAS) (Buck Scientific 210VGB). Two digestion methods were used to concentrate the metals. Mean concentration for Fe was 6548&plusmn;72.94&micro;g/g; 24.57&plusmn;16.74&micro;g/g Cu; 24.57&plusmn;16.74&micro;g/g Zn; 11.64&plusmn;9.02&micro;g/g Cr and BDL for Pb, Ni and Cd using aqua-regia digestion while mean concentrations using HClO<sub>4</sub>, HNO<sub>3</sub> and H<s
APA, Harvard, Vancouver, ISO, and other styles
16

ORTEGA, RICHARD. "MICRO-PIXE FOR SINGLE CELL ANALYSIS." International Journal of PIXE 22, no. 01n02 (2012): 51–56. http://dx.doi.org/10.1142/s0129083512400220.

Full text
Abstract:
The knowledge of the intracellular distribution of biological relevant metals is important to understand their mechanisms of action in cells, either for physiological, toxicological or pathological processes. However, the direct detection of trace metals in single cells is a challenging task that requires sophisticated analytical developments. The combination of micro-PIXE with RBS and STIM (Scanning Transmission Ion Microscopy) allows the quantitative determination of trace metal content within sub-cellular compartments. The application of STIM analysis provides high spatial resolution imagin
APA, Harvard, Vancouver, ISO, and other styles
17

Chen, Jin Mu, Huang Yuan, and Markus Schneider. "Investigation of Micromechanical Deformation Mechanisms in Sinter Powder Metals." Advanced Materials Research 668 (March 2013): 351–55. http://dx.doi.org/10.4028/www.scientific.net/amr.668.351.

Full text
Abstract:
Sintered powder metals have found wide applications in industry. However, the constitutive description under complex loading conditions is an open issue. In the present work, the inelastic deformation mechanisms of sintered iron are investigated using nano-indentation technique. With help of the finite element method, the material behaviour of powder particles can be identified from extensive nano-indentations. Furthermore, the micro-hardness of pre-strained specimens has been investigated as a function of the macro strains up to 14%. Nano-indentation measurements provide a linear correlation
APA, Harvard, Vancouver, ISO, and other styles
18

Носенко, Владимир, Vladimir Nosenko, Александр Фетисов, et al. "Contact interaction intensity and material transfer at grinding and refractory metal micro-scratching." Science intensive technologies in mechanical engineering 2, no. 10 (2017): 9–18. http://dx.doi.org/10.12737/article_59d496eb7ba532.91441180.

Full text
Abstract:
Peculiarities in the contact surfaces formation and material transfer at micro-scratching and grinding of refractory metals are investigated. There is shown a connection of metal quantity transferred to the area of crystal wear, a degree of ground surface charging with silicon carbide crystals and wear of an abrasive tool with the electron structure of atoms in refractory metals. It is defined, that the intensity of metal transfer in a crystal surface layer decreases with the increase of a principle quantum number of metal valence electrons. According to the intensity of the interaction silico
APA, Harvard, Vancouver, ISO, and other styles
19

O'Keefe, E., M. Swan, R. Jones, V. Gergly, and N. Cameron. "Micro-foamed structural materials for micro-aircraft." Aeronautical Journal 106, no. 1061 (2002): 385–92. http://dx.doi.org/10.1017/s0001924000092149.

Full text
Abstract:
AbstractThe development of micro-air vehicles poses a considerable challenge to the materials scientist. Vehicles that may occupy less than 10cm in any direction require many structural components with dimensions well below 1mm when conventional engineering and assembly techniques are employed. As with conventional unmanned air vehicles (UAVs), and full-scale aircraft, materials that display a huge breadth of characteristics are required to build the airframe and to engineer sub-components, while meeting stringent mass and volume budgets. In particular, high modulus, high toughness, easy forma
APA, Harvard, Vancouver, ISO, and other styles
20

Zavoyilichinskaya, E. B. "Theory of the gradual accumulation of fatigue damage in metals under proportional cyclic loading." Izvestiya MGTU MAMI 9, no. 2-4 (2015): 68–75. http://dx.doi.org/10.17816/2074-0530-67134.

Full text
Abstract:
The paper provides system of hypotheses about the development of defects in metals at micro, meso and macro levels (such as fragile micro- and macro-cracks) under arbitrary proportional (simple) cyclic loading. The system is formulated on the basis of extensive experimental and theoretical material about fatigue failure of metals and metal alloys. For uniaxial loading the symmetrical correlations of phenomenological model of brittle fatigue loading of metals are written. The correlations cover the entire process step by step with the release of a typical state - the type of defect.
APA, Harvard, Vancouver, ISO, and other styles
21

Gomes, Milla Caroline, Aline Gonçalves dos Santos, Déborah de Oliveira, et al. "Micro-machining of additively manufactured metals: a review." International Journal of Advanced Manufacturing Technology 118, no. 7-8 (2021): 2059–78. http://dx.doi.org/10.1007/s00170-021-08112-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Zahedi, S. A., A. Roy, and V. V. Silberschmidt. "Modeling of Micro-machining Single-crystal f.c.c. Metals." Procedia CIRP 8 (2013): 346–50. http://dx.doi.org/10.1016/j.procir.2013.06.114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Shi, Wenqing, Wenhua Wang, and Yanlu Huang. "Laser micro-welding of Cu-Al dissimilar metals." International Journal of Advanced Manufacturing Technology 85, no. 1-4 (2015): 185–89. http://dx.doi.org/10.1007/s00170-015-7925-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

LIPINSKI, P., and M. BERVEILLER. "Elastoplasticity of micro-inhomogeneous metals at large strains." International Journal of Plasticity 5, no. 2 (1989): 149–72. http://dx.doi.org/10.1016/0749-6419(89)90027-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Piotter, Volker, Thomas Gietzelt, and Lothar Merz. "Micro powder-injection moulding of metals and ceramics." Sadhana 28, no. 1-2 (2003): 299–306. http://dx.doi.org/10.1007/bf02717139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Kê, T. S. "Micro-mechanism of grain boundary relaxation in metals." Scripta Metallurgica et Materialia 24, no. 2 (1990): 347–52. http://dx.doi.org/10.1016/0956-716x(90)90268-l.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Xue, Xiao Huai, Song Nian Lou, Bainian Qian, and Shaofei Yu. "Development of the SAW Wire for High Strength TMCP Steel." Materials Science Forum 475-479 (January 2005): 269–72. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.269.

Full text
Abstract:
The wire for high strength and toughness TMCP steels of submerged arc welding was developed. The low carbon and micro-alloying with Ti-B system was adopted to obtain the acicular ferrite dominated deposited metals. Experimental results show that the carbon equivalent (Pcm) should be higher than 0.17, which can ensure the high strength and high toughness of the deposited metals. In the alloy system, Oxygen and Nitrogen contents, micro-alloyed elements (C, Mn) and its mixture ratio are the key factors that affect the deposited metals toughness. With increasing C, Mn content, the acicular ferrite
APA, Harvard, Vancouver, ISO, and other styles
28

Petrík, Jozef, Peter Blaško, Štefan Markulík, Marek Šolc, and Pavol Palfy. "The Indentation Size Effect (ISE) of Metals." Crystals 12, no. 6 (2022): 795. http://dx.doi.org/10.3390/cryst12060795.

Full text
Abstract:
The literature regarding the Reverse Indentation Size Effect (RISE) is scarce, the occurrence of which is assumed for plastic materials, including metals. The content of this article is to study the relationship between applied load and measured values of the Vickers micro-hardness of 19 metals with different types of lattices, measured with a Hanemann tester. The values of the load ranged between 0.09807 N (10 g) and 0.9807 N (100 g). The size and character of the Indentation Size Effect (ISE) were evaluated by Meyer’s power law (index n), Proportional Specimen Resistance (PSR), and Hays—Kend
APA, Harvard, Vancouver, ISO, and other styles
29

Valentinčič, Joško. "Current Trends in Micro and Nano Manufacturing." Micromachines 13, no. 12 (2022): 2058. http://dx.doi.org/10.3390/mi13122058.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Upot, Nithin Vinod, Kazi Fazle Rabbi, Alireza Bakhshi, Johannes Kohler Mendizabal, Anthony M. Jacobi, and Nenad Miljkovic. "Etching-enabled ultra-scalable micro and nanosculpturing of metal surfaces for enhanced thermal performance." Applied Physics Letters 122, no. 3 (2023): 031603. http://dx.doi.org/10.1063/5.0134608.

Full text
Abstract:
Incorporation of micro- and nanostructures on metals can improve thermal performance in a variety of applications. In this work, we demonstrate two independent highly scalable and cost-effective methods to generate micro- and nanostructures on copper and stainless steel, two widely used metals in energy and thermal applications. The performance of the developed structures, fabricated using scalable chemical etching techniques, is compared against their respective base metals. Our results demonstrate significant flow boiling heat transfer coefficient improvements up to 89% for etched copper and
APA, Harvard, Vancouver, ISO, and other styles
31

Wang, Zhenwei, and Yating Yu. "Traditional Eddy Current–Pulsed Eddy Current Fusion Diagnostic Technique for Multiple Micro-Cracks in Metals." Sensors 18, no. 9 (2018): 2909. http://dx.doi.org/10.3390/s18092909.

Full text
Abstract:
Due to a harsh working environment, micro-cracks in metal structures (e.g., airplane, oil/gas pipeline, hydro-turbine) often lead to serious accidents, so health monitoring of the metals is of great significance to ensure their safe operation. However, it is hard to perform quantitative detection of multiple micro-cracks by a single nondestructive testing (NDT) technique because of their limits. To monitor for multiple micro-cracks in metals, a Traditional Eddy Current (TEC) and Pulsed Eddy Current (PEC) fusion NDT technique is proposed in this paper. In the proposed technique, the TEC techniq
APA, Harvard, Vancouver, ISO, and other styles
32

Zhao, Kun Ning, Burkhard Wietbrock, and Gerhard Hirt. "Micro Warm Coining of Stainless Steel Sheets Using Electric Conductive Heating." Key Engineering Materials 473 (March 2011): 991–98. http://dx.doi.org/10.4028/www.scientific.net/kem.473.991.

Full text
Abstract:
The motivation of this study is to investigate micro warm coining of metals with high strength (e.g. austenitic steels) in the field of fabricating micro functional surface structures. The current micro cold coining technology, which uses punches made out of steel, is limited to soft metals, such as Al and Cu. Conducting micro cold coining on steels, leads to high tool wear and bad form filling. The approach of this study is integrating electric conductive heating into a micro coining system to realize micro warm coining of stainless steel. This paper presents the experimental and numerical an
APA, Harvard, Vancouver, ISO, and other styles
33

Cepak, Veronica M., John C. Hulteen, Guangli Che, et al. "Fabrication and characterization of concentric-tubular composite micro- and nanostructures using the template-synthesis method." Journal of Materials Research 13, no. 11 (1998): 3070–80. http://dx.doi.org/10.1557/jmr.1998.0419.

Full text
Abstract:
The template-synthetic method is a general approach for preparing tubular micro-and nanostructures. This method has been used to prepare micro- and nanostructures composed of metals, carbons, semiconductors, polymers, and Li+-intercalation materials. This paper describes the use of the template method to prepare composite tubular micro- and nanostructures. These composite structures consist of an outer tubule of one material surrounding inner tubules of different materials. Chemical strategies used to prepare these composite tubular structures include electroless deposition of Au, electropolym
APA, Harvard, Vancouver, ISO, and other styles
34

Lv, Xiang Feng, Yi Shan Pan, and Xiao Chun Xiao. "Study on Fracture Micro-Mechanics Mechanism and Dynamic Energy Absorption Property of Closed-Cell Foam Metals." Materials Science Forum 704-705 (December 2011): 804–10. http://dx.doi.org/10.4028/www.scientific.net/msf.704-705.804.

Full text
Abstract:
In order to gain a deep understanding of energy absorption property and failure mechanism of closed-cell foam metals, the dynamic energy absorption property of closed-cell foam metals with matrix Al, matrix Al-Si6, matrix Al-Si12 CCAF, Mg matrix, aluminum-fiber and RE-Al alloys are discussed based on the compression and energy absorption test. The influence of different basis materials on absorption property of closed-cell foam metals is discussed, too. It also shows the micro topography of CCAF during the compression process. In addition, micro-mechanics failure mechanism of CCAF is discussed
APA, Harvard, Vancouver, ISO, and other styles
35

Okpara, Kingsley Ezechukwu, and Obinna Eugene-Nwala. "Derivation of Human Health Ambient Water Quality Criteria for Heavy Metals and Health Risk Assessment in Ntawogba Creek." International Journal of Microbiology and Applied Sciences 4, no. 1 (2025): 117–27. https://doi.org/10.5281/zenodo.15571175.

Full text
Abstract:
In recent times, heavy metals pollution is a public health concern due to their toxic, bioaccumulative nature and their tendency to persist in aquatic environment for extended periods. Human health ambient water quality criteria (AWQC) are defined as the safe concentration levels of chemicals in water that do not pose a risk to human health and very significant in accurate estimation of health risk of pollutants. Currently, the impact of aquatic vegetables is often overlooked in the formulation of these criteria in most countries. Consequently, this study incorporated the consumption of aquati
APA, Harvard, Vancouver, ISO, and other styles
36

CHUKWUMATI J A and IKIRIKO M. "Effectiveness of bio- phytoremediation on heavy metal contaminated soils: A review." GSC Advanced Research and Reviews 14, no. 3 (2023): 054–63. http://dx.doi.org/10.30574/gscarr.2023.14.3.0067.

Full text
Abstract:
The need to restore the environment contaminated with heavy metals to its original ornear original status has become necessary due to the harm high concentration of heavy metals cause to the environment and the food chain. In this review, different remediation approach was considered, their merits and short coming. Focus was more on bio-phytoremediation: use of some selected plants and micro-organisms to decontaminate heavy metals from contaminated sites. . Differentplant species especially hyper accumulative plants were used to decontaminate heavy metals from contaminated site. Vetiver grass
APA, Harvard, Vancouver, ISO, and other styles
37

CHUKWUMATI, J. A., and M. IKIRIKO. "Effectiveness of bio- phytoremediation on heavy metal contaminated soils: A review." GSC Advanced Research and Reviews 14, no. 3 (2023): 054–63. https://doi.org/10.5281/zenodo.7928486.

Full text
Abstract:
The need to restore the environment contaminated with heavy metals to its original ornear original status has become necessary due to the harm high concentration of heavy metals cause to the environment and the food chain. In this review, different remediation approach was considered, their merits and short coming. Focus was more on bio-phytoremediation: use of some selected plants and micro-organisms to decontaminate heavy metals from contaminated sites. . Differentplant species especially hyper accumulative plants were used to decontaminate heavy metals from contaminated site. Vetiver grass
APA, Harvard, Vancouver, ISO, and other styles
38

Ebuka, Victor Anyaogu, Nkiruka Umeaku Chinyelu, M. Isirue Abel, Stephnora Esiobu Oluchi, and Udochukwu Onuoha Noble. "Utilization of metal-resistant bacteria in the detoxification of contaminated dumpsites." GSC Biological and Pharmaceutical Sciences 21, no. 2 (2022): 088–96. https://doi.org/10.5281/zenodo.7652677.

Full text
Abstract:
The potentials of four metal-resistant bacterial strains to reduce the concentration of selected metals in dumpsite leachate were studied. The Environmental Microbiology and Biotechnology laboratory&#39;s culture collection of bacteria was used to extract the bacteria, which were then exposed to progressively higher metal concentrations in a medium enriched with metals. After the bacterial cells had been separated from the leachate by centrifugation at 10000 rpm for 15 min, the bacteria were then added to a batch culture biosorption set-up containing the culture medium and tyndallized leachate
APA, Harvard, Vancouver, ISO, and other styles
39

Pham, Gia Khanh, Ruth Domes, Ümit Mavis, et al. "Indentation hardness of 3D-printed metals." Rakenteiden Mekaniikka 58, no. 2 (2025): 86–109. https://doi.org/10.23998/rm.148552.

Full text
Abstract:
Additive manufacturing is typically used for rapid prototyping and the production of small to medium quantities of complex parts. The quality of 3D-printed metallic parts depends on the printing process parameters and material behaviour. In order to characterize the mechanical properties of materials, the nearly non-destructive micro-indentation hardness testing of additively manufactured steel and aluminium alloy using Laser Powder Bed Fusion technology was investigated in this study. The micro-hardness and modulus of elasticity of hot work tool steel AISI H13 (1.2344) were evaluated to study
APA, Harvard, Vancouver, ISO, and other styles
40

Koraboyevna, Atakhonova Sayyora. "BASIC METHODS OF STUDYING THE INTERNAL STRUCTURE OF METALS." American Journal of Engineering and Technology 5, no. 12 (2023): 33–37. http://dx.doi.org/10.37547/tajet/volume05issue12-08.

Full text
Abstract:
This article presents the methods of analysis of metals. Technological processes, such as checking the macro and microstructure of metals and alloys, are widely covered. Equipment used for macro and micro analysis and slide preparation technologies are widely covered.
APA, Harvard, Vancouver, ISO, and other styles
41

Nosenko, Vladimir A., Aleksandr V. Fetisov, Sergey V. Nosenko, Viktor G. Karpov, and Valeria E. Puzyrkova. "Study of the Silicon Carbide Wear Area after Micro-Scratching of Titanium, Zirconium, Niobium and Molybdenum at a Speed of 35 m/s." Materials Science Forum 1037 (July 6, 2021): 614–25. http://dx.doi.org/10.4028/www.scientific.net/msf.1037.614.

Full text
Abstract:
The authors conducted the study at micro-scratching of titanium, zirconium, niobium and molybdenum alloys. The content of the main element in alloys was from 99.5 to 99.7 %. Micro-cutting was carried out by specially prepared indenters with silicon carbide mono-crystals of a given shape. The state of the relief and the chemical composition of the wear area were studied using a scanning two-beam electron microscope. The micro-scratching speed was 35 m/s without cooling. The condition of the contact surfaces of silicon carbide and metals was studied at a magnification up to 100,000 times with th
APA, Harvard, Vancouver, ISO, and other styles
42

Omelchuk, A., S. V. Volkov, and O. G. Zarubitskii. "Modern electrochemical processes and technologies in ionic melts." Journal of Mining and Metallurgy, Section B: Metallurgy 39, no. 1-2 (2003): 93–107. http://dx.doi.org/10.2298/jmmb0302093o.

Full text
Abstract:
An analysis of the known methods for the electrochemical purification of non-ferrous metals in ionic melts is presented. A comparative estimation of the results of the electrochemical purification of non-ferrous metals by different methods has been performed. The main regularities of the electrochemical behavior of non-ferrous metals in conventional and electrode micro-spacing electrolysis are presented. It has been found that when electrolyzing some metals, e. g. bismuth, gallium, there is either no mass exchange between the electrodes, or it occurs under filtration conditions. It has been sh
APA, Harvard, Vancouver, ISO, and other styles
43

Adekanmbi, Abimbola O., Wasiu O. Oyeladun, and Adedolapo V. Olaposi. "Degradation of surfactant and metal-removal by bacteria from a Nigerian laundry environment." European Journal of Biological Research 8, no. 4 (2018): 243–51. https://doi.org/10.5281/zenodo.1494292.

Full text
Abstract:
This study aimed at degrading sodium dodecyl sulphate (SDS), a surfactant in the presence of metals using metal-tolerant bacteria from a laundry site. Metal composition of wastewater and sediments from a laundry environment was determined using atomic absorption spectrometry (AAS). <em>Paenibacillus</em><em> amylolyticus</em> BAL1 (PAB) and <em>Bacillus lentus</em> BAL2 (BLB), earlier reported to tolerate 1000 ppm SDS were screened for metal tolerance. The bacteria were employed in the simultaneous degradation of SDS and metal removal in a batch culture set-up containing SDS and metals for 14
APA, Harvard, Vancouver, ISO, and other styles
44

Lu, Haina N., D. B. Wei, and Z. Y. Jiang. "Investigation on Dimensional Accuracy in Micro Cross Wedge Rolling of Metals." Key Engineering Materials 622-623 (September 2014): 943–48. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.943.

Full text
Abstract:
A novel microforming process - Micro Cross Wedge Rolling (MCWR) has been developed. It is a very promising technology in the field of microforming due to its advantages such as high product rate and minimised material consumption. How to control geometrical accuracy of the produced micro parts is one of the major challenges in the development of microforming technology. Geometrical accuracy was still concentrated in term of springback. When the wedge tools loads are removed after forming step, a portion of the deformation recovers, which causes a change in the shape of micro parts. In other wo
APA, Harvard, Vancouver, ISO, and other styles
45

Zhao, Yue, Liang Luo, Zheng Yi Jiang, Xiao Ming Zhao, and Di Wu. "Study on Simulation and Experiment of Micro Sheet Metal Forming." Advanced Materials Research 941-944 (June 2014): 1876–81. http://dx.doi.org/10.4028/www.scientific.net/amr.941-944.1876.

Full text
Abstract:
In the last few decades, there is a global interest in micro products, and micro forming of metals is a promising micro manufacturing method. However, a comprehensive understanding of this process is absent. Therefore, this study aims to investigate micro deep drawing process via experimental and analysis work. Simulation results are in good agreement with the experimental data. The comparison between the finite element method (FEM) simulation and experimental results shows the feasibility of FEM simulation for micro deep drawing process. This research also lays a fundament of investigating mi
APA, Harvard, Vancouver, ISO, and other styles
46

Silver, Simon. "Metals and Micro-Organisms.Martin N. Hughes , Robert K. Poole." Quarterly Review of Biology 66, no. 1 (1991): 73. http://dx.doi.org/10.1086/417059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Mondy, William L., Christophe Casteleyn, Denis V. Loo, Muthkrishna Raja, Christopher Singleton, and Jeffrey G. Jacot. "Osmium Tetroxide Labeling of (Poly)Methyl Methacrylate Corrosion Casts for Enhancement of Micro-CT Microvascular Imaging." Microscopy and Microanalysis 19, no. 6 (2013): 1416–27. http://dx.doi.org/10.1017/s1431927613013421.

Full text
Abstract:
AbstractIn order to enhance micro-computer tomography (micro-CT) imaging of corrosion casts of fine vasculature, metals can be added to the casting resin before perfusion. However, perfused metals lead to vasoconstriction or vessel damage resulting in nonphysiologic vascular casts. A novel method for coating methyl methacrylate vascular casts with osmium tetroxide has been developed in order to increase micro-CT contrast without affecting the vascular structure. This technique was verified using corrosion casts of the lung vasculature of New Zealand white rabbits. Osmium tetroxide coating of m
APA, Harvard, Vancouver, ISO, and other styles
48

Liu, Wei, and Qiong Hua Zhou. "Comparisons of Nanocrystalline Cu, Ag, and Al Prepared by Room-Temperature-Molding Method and Vacuum-Warm-Compaction Method." Advanced Materials Research 704 (June 2013): 207–11. http://dx.doi.org/10.4028/www.scientific.net/amr.704.207.

Full text
Abstract:
Nanocrystalline nonferrous metals (Cu, Ag, and Al) were fabricated by room-temperature-molding method and vacuum-warm-compaction method, respectively. X-ray diffraction, Positron annihilation spectroscopy, and density test were utilized to characterize these as-prepared nanocrystalline specimens. The thermal stability and micro-void distribution of the as-prepared nanocrystalline metals were compared and discussed in detail. The experimental results show that the increasing of density is unremarkable while the microstrain reduces during warm-compaction process. The nanocrystalline nonferrous m
APA, Harvard, Vancouver, ISO, and other styles
49

Calabrese, Luigi, Martina Azzolini, Federico Bassi, et al. "Micro-Milling Process of Metals: A Comparison between Femtosecond Laser and EDM Techniques." Journal of Manufacturing and Materials Processing 5, no. 4 (2021): 125. http://dx.doi.org/10.3390/jmmp5040125.

Full text
Abstract:
Nowadays, micro-machining techniques are commonly used in several industrial fields, such as automotive, aerospace and medical. Different technologies are available, and the choice must be made considering many factors, such as the type of machining, the number of lots and the required accuracy specifications in terms of geometrical tolerances and surface finish. Lasers and electric discharge machining (EDM) are widely used to produce micro-components and are similarly unconventional thermal technologies. In general, a laser is particularly appreciated by the industry for the excellent machini
APA, Harvard, Vancouver, ISO, and other styles
50

Ouma, Shellemiah Otieno, Esther Nkirote Magiri, Mabel Imbuga, and Hamadi Boga. "Comparative progressive composting, evaluation and profiling of minerals and heavy metals in human solid waste collected by green toilet system, cow dung, poultry droppings, and goat waste composts." Journal of Agriculture, Science and Technology 23, no. 3 (2024): 9–28. http://dx.doi.org/10.4314/jagst.v23i3.2.

Full text
Abstract:
The value of human excreta, a resource that is available in all societies is underestimated in present agriculture. In parts of South East Asia, the use of human excreta as fertilizer in agriculture is a common practice benefiting production. The excreta contain chemical elements that circulate in biogeochemical cycles necessary in plant nutrition. This study aimed to progressively detect, quantify, and profile minerals (micro, macro and heavy metals) levels in human solid waste from Green Toilet System and compare with cow dung, poultry droppings, and goat waste composts at different stages o
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!