Academic literature on the topic 'Microcontroller'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microcontroller.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Microcontroller"

1

Jovanović, Borisav, Milunka Damnjanović, Predrag Petković, and Vančo Litovski. "Standard Cell-Based Low Power Embedded Controller Design." Journal of Circuits, Systems and Computers 24, no. 06 (May 26, 2015): 1550077. http://dx.doi.org/10.1142/s0218126615500772.

Full text
Abstract:
Microcontrollers represent unavoidable parts of state-of-the-art system-on-chips (SoCs) and they are widely embedded as IP blocks. This paper describes design steps and the application of available low-power techniques, to the design of a microcontroller IP core with 8051 instruction set, based on a prescribed standard cell libraries. Choice of the technology node and the cell library supplier is a design challenge that was considered and conclusions reached. The necessary steps of microcontroller design flow are presented which enable power reduction at several abstraction levels. An optimal microcontroller was designed to be embedded in various SoCs. The goal was to get energy-efficient microcontroller operation in applications which don't require intensive data processing. The impact of technology scaling on microcontroller energy efficiency is considered by comparison of the results obtained from implementations in three standard cell technologies. Moreover, power dissipation models are created which allow for microcontroller's power estimation in low throughput sensors networks applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Baklanov, Alexander, Svetlana Grigoryeva, Aslim Alimkhanova, and Alexander Dmitriev. "An indoor temperature control system based on visible light communications technology." Science Bulletin of the Novosibirsk State Technical University, no. 2-3 (November 13, 2020): 7–24. http://dx.doi.org/10.17212/1814-1196-2020-2-3-7-24.

Full text
Abstract:
The article proposes a new approach to temperature control in a building based on the Visible Light Communications technology. This approach is based on using LED lamps as temperature data transmitters as well as for lighting. Light modulation based on the UART standard was used for data transfer. A photodiode with the capability to distinguish relatively weak signals was used for receiving data. All data processing was performed by microcontrollers. UART-based modulation was also performed on a microcontrolle. The article describes in detail schematic circuits of transmitting and receiving devices. Based on developeed schematic circuits, a new experimental setup consisting of two units was created. The transmission unit includes a temperature sensor, a microcontroller, a driver and an LED. The receiving unit includes a photodiode, an amplifier and a microcontroller. An ATmega328P chip was used for both microcontrollers. Experimental setup consists of experimental models of both units. For signal transmission control, measurements of the pulse level and shape were conducted in the receiving device with an oscillograph. The signal level was anaylsed after all electronic components but before entering the microcontroller. Experimental results have shown that data transmission with the use of white LEDs was relatively stable. This allows the possibility of organising wireless control of temperature conditions on premises without Wi-Fi. Perspective uses of temperature control with white LEDs approach include the creation of “Smart house» control system without using wirelines and with cheap microcontrollers, which signficiantly decreases costs of the system.
APA, Harvard, Vancouver, ISO, and other styles
3

Ali, A. Z. A., M. F. Zakaria, M. N. A. Mohamad, W. N. A. W. Muhammad, and W. S. I. W. Salim. "Development of Electronic Valve Timing Control Unit for Single Piston Expander with Microcontroller." Journal of Physics: Conference Series 2312, no. 1 (August 1, 2022): 012073. http://dx.doi.org/10.1088/1742-6596/2312/1/012073.

Full text
Abstract:
Abstract An electronic valve timing control unit has been developed mainly for the internal combustion engine operation. This study aims to implement a similar technology into a single-piston expander (SPE) with readily available and low-cost microcontrollers. The study used an Arduino Mega 2560 and ESP32-WROOM microcontrollers to control the valve timing with the rotational input signal obtained from an absolute encoder. The SPE has been expected to run at the rotational speed of up to 2000 rpm. This setup was prepared to simulate the actual SPE operation using a direct current motor to drive the spindle connected to the encoder shaft to create a similar hardware testing and controlled environment. The study aims to identify the efficiency of the microcontroller’s performance with a variation of the valve’s opening and closing time. Results have shown that the clock rate of the microcontroller affects the performance of valve timing response. By increasing the clock rate, the microcontroller can control the valve at a higher speed.
APA, Harvard, Vancouver, ISO, and other styles
4

Ramu, Kurinjimalar, M. Ramachandran, and Manjula Selvam. "Microcontroller Based Sensor Interface and Its Investigation." Electrical and Automation Engineering 1, no. 2 (July 1, 2022): 92–97. http://dx.doi.org/10.46632/eae/1/2/4.

Full text
Abstract:
A microcontroller (sometimes called an MCU or microcontroller unit) is an integrated circuit (IS) commonly used for a specific application designed to do certain tasks. Devices, power tools, and automobile engine control products must be controlled automatically under certain conditions, such as computers and systems. And best examples of devices, but microcontrollers are beyond these applications. Essentially, the microcontroller collects input, processes this information, and publishes a specific action based on the information collected. Microcontrollers typically operate at low speeds of 1 MHz to 200 MHz and must be designed to use less power as they are embedded in other devices with higher power consumption in other areas. The microcontroller is a particular feature inside the embedded system a small included designed to manage Round. A common microcontroller chip processor, Memory and input output (I / O) gadgets Contains. Microcontrollers embedded Controller or microcontroller unit (MCU),Vehicles, robots, every now and then the workplace Machinery, Medical Devices, Mobile Radio Transceivers, vending machines and family Found in consumables. Unnecessarily small a small aspect designed to govern functions of the portable of private computer systems. For a complex pre-very last running system (OS).
APA, Harvard, Vancouver, ISO, and other styles
5

Orlando, Dani, Daniel Kaparang, and Kristofel Santa. "Perancangan Sistem Kontrol Suhu Ruangan Server Menggunakan Arduino Uno Di Pusat Komputer Universitas Negeri Manado." Jointer - Journal of Informatics Engineering 2, no. 02 (December 31, 2021): 17–28. http://dx.doi.org/10.53682/jointer.v2i02.24.

Full text
Abstract:
Abstract—Microcontrollers are now growing rapidly and are increasingly in demand on system applications control. These days, there are many microcontrollers that already in module form. One of the microcontroller module that is widely used is Arduino. Arduino is a type of board which contains a microcontroller. Combined with the ESP8266-01 module and NodeMCU makes the microcontroller can be connected via internet network. Microcontroller board device Arduino makes it possible to process the temperature reading data from the temperature sensor for support to the display unit using an android based smartphone and controlling AC temperature using Telegram. The processing result data from this Arduino board will be transmitted using wireless media connected to internet network.
APA, Harvard, Vancouver, ISO, and other styles
6

Vinko, Davor, Kruno Miličević, Ivica Lukić, and Mirko Köhler. "Microcontroller-Based PUF for Identity Authentication and Tamper Resistance of Blockchain-Compliant IoT Devices." Sensors 23, no. 15 (July 28, 2023): 6769. http://dx.doi.org/10.3390/s23156769.

Full text
Abstract:
Blockchain-based applications necessitate the authentication of connected devices if they are employed as blockchain oracles. Alongside identity authentication, it is crucial to ensure resistance against tampering, including safeguarding against unauthorized alterations and protection against device counterfeiting or cloning. However, attaining these functionalities becomes more challenging when dealing with resource-constrained devices like low-cost IoT devices. The resources of IoT devices depend on the capabilities of the microcontroller they are built around. Low-cost devices utilize microcontrollers with limited computational power, small memory capacity, and lack advanced features such as a dedicated secure cryptographic chip. This paper proposes a method employing a Physical Unclonable Function (PUF) to authenticate identity and tamper resistance in IoT devices. The suggested PUF relies on a microcontroller’s internal pull-up resistor values and, in conjunction with the microcontroller’s built-in analog comparator, can also be utilized for device self-checking. A main contribution of this paper is the proposed PUF method which calculates the PUF value as the average value of many single PUF measurements, resulting in a significant increase in accuracy. The proposed PUF has been implemented successfully in a low-cost microcontroller device. Test results demonstrate that the device, specifically the microcontroller chip, can be identified with high accuracy (99.98%), and the proposed PUF method exhibits resistance against probing attempts.
APA, Harvard, Vancouver, ISO, and other styles
7

Akdemir, Bayram, and Hasan Üzülmez. "Providing Security of Vital Data for Conventional Microcontroller Applications." Applied Mechanics and Materials 789-790 (September 2015): 1059–66. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.1059.

Full text
Abstract:
Microcontrollers are widely used in industrial world, and almost all kind of devices were based on microcontroller to achieve high flexibility and abilities. All microcontrollers have nonvolatile and volatile memories to execute the software. During the running, microcontroller calculates many variables and records them to any non-volatile memory to use later. After re-energizing, microcontroller takes the data calculated before the power off and executes the program. In case of any electrical writing error or any power loss during the writing procedure, un-written memory blocks or any un-written data leads to malfunctions. Proposed method uses a gray code based signed two memory blocks to secure the memory reserved for data. Microcontroller uses these memory blocks in alternately. Even if microcontroller has no any real-time ability, gray code provides a guarantee which block is written in last. For every re-starting microcontroller dos not lose the data. In case of any reading problem during the starting, microcontroller has two chances to decide the action. One is to start with default values and the other is to start with the previous data. This study is tested at elevator applications not to lose position and vital values.
APA, Harvard, Vancouver, ISO, and other styles
8

Haysom, M. L. "Enticing Students to Program Microcontrollers." International Journal of Electrical Engineering & Education 32, no. 3 (July 1995): 214–22. http://dx.doi.org/10.1177/002072099503200303.

Full text
Abstract:
Enticing students to program microcontrollers Writing microcontroller code requires the application of logic and defined rules. It may have intrinsic appeal to some people, but not to others. This paper presents a strategy which successfully enticed a diverse group of students to program microcontrollers. The strategy is consistent with industrial techniques for microcontroller system development.
APA, Harvard, Vancouver, ISO, and other styles
9

Kusuma, Redika Ardi, and Rudiati Evi Masithoh. "Bibliometric Analysis on Recent Advances and Development of Microcontroller Application in The Postharvest System." Jurnal Ilmiah Rekayasa Pertanian dan Biosistem 11, no. 2 (September 27, 2023): 201–20. http://dx.doi.org/10.29303/jrpb.v11i2.533.

Full text
Abstract:
Postharvest is a vital stage in agricultural production which is prone to causing losses due to improper implementation. Using a microcontroller that allows automation and increased precision in the postharvest process will likely reduce costs and potential losses. This research conducted a bibliometric study on applying microcontrollers in postharvest systems in Scopus-indexed publications from 2003 to 2022. The aim was to reveal microcontroller developments, evaluate current research topics, and discuss future challenges facing microcontroller applications in postharvest systems. First, this paper presents a bibliometric review of the role of microcontrollers in postharvest. Second, co-citation, coupling, and cluster analysis methods were used to analyze collaboration networks, and VOSviewer was used to visualize these networks. Third, Biblioshiny was used to analyze thematic trends of microcontroller applications. Finally, the paper discusses the challenges of using microcontrollers and provides suggestions for overcoming them. The results show that institutions from China and Italy lead research production in this field, with globally popular studies focusing primarily on fruit, digital storage, moisture determination, and cost. In addition, the thematic evolution of keywords indicating response time, cost, and design reliability issues have become basic and emerging topics in microcontroller application research for postharvest systems in recent years.
APA, Harvard, Vancouver, ISO, and other styles
10

Voronov, K. E., K. I. Sukhachev, and D. S. Vorobev. "Development of Control Module Based on a Computing IP-Core." Rocket-space device engineering and information systems 8, no. 1 (2021): 24–38. http://dx.doi.org/10.30894/issn2409-0239.2021.8.1.24.38.

Full text
Abstract:
The article presents the result of the implementation of a synthesized microcontroller in integrated circuits of small FPGAs and a variant of building a control system for an onboard control module based on the developed solution. The possibility of creating a full-fledged microcontroller based on a type 5578TC034 FPGA and more capacious microcontrollers is shown. The description of the structure of the microcontroller, processor core and periphery is given. The processor instruction system is presented. Ip-modules of peripheral devices and some interfaces have been developed. A variant of creating a control system using the developed microcontroller is proposed. In the future, it is planned to increase the functionality of the synthesized microcontroller by optimizing ip-modules and adding new ones. When developing the control system, a domestic component base was used.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Microcontroller"

1

Alley, Peter J. "Introductory Microcontroller Programming." Digital WPI, 2011. https://digitalcommons.wpi.edu/etd-theses/439.

Full text
Abstract:
This text is a treatise on microcontroller programming. It introduces the major peripherals found on most microcontrollers, including the usage of them, focusing on the ATmega644p in the AVR family produced by Atmel. General information and background knowledge on several topics is also presented. These topics include information regarding the hardware of a microcontroller and assembly code as well as instructions regarding good program structure and coding practices. Examples with code and discussion are presented throughout. This is intended for hobbyists and students desiring knowledge on programming microcontrollers, and is written at a level that students entering the junior level core robotics classes would find useful.
APA, Harvard, Vancouver, ISO, and other styles
2

Eriksen, Stein Ove. "Low-power microcontroller core." Thesis, Norwegian University of Science and Technology, Department of Electronics and Telecommunications, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9048.

Full text
Abstract:

Energy efficiency in embedded processors is of major importance in order to achieve longer operating time for battery operated devices. In this thesis the energy efficiency of a microcontroller based on the open source ZPU microprocessor is evaluated and improved. The ZPU microprocessor is a zero-operand stack machine originally designed for small size FPGA implementation, but in this thesis the core is synthesized for implementation with a 180nm technology library. Power estimation of the design is done both before and after synthesis in the design flow, and it is shown that power estimates based on RTL simulations (before synthesis) are 35x faster to obtain than power estimates based on gate-level simulations (after synthesis). The RTL estimates deviate from the gate-level estimates by only 15% and can provide faster design cycle iterations without sacrificing too much accuracy. The energy consumption of the ZPU microcontroller is reduced by implementing clock gating in the ZPU core and also implementing a tiny stack cache to reduce stack activity energy consumption. The result of these improvements show a 46% reduction in average power consumption. The ZPU architecture is also compared to the more common MIPS architecture, and the Plasma CPU of MIPS architecture is synthesized and simulated to serve as comparison to the ZPU microcontroller. The results of the comparison with the MIPS architecture shows that the ZPU needs on average 15x as many cycles and 3x as many memory accesses to complete the benchmark programs as the MIPS does.

APA, Harvard, Vancouver, ISO, and other styles
3

Taskin, Tolga. "Mc6811 Microcontroller Simulation Toolkit." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606764/index.pdf.

Full text
Abstract:
The goal of this thesis study is to develop a simulator toolkit for Motorola&rsquo
s 8-bit microcontroller MC6811. The toolkit contains a cross-assembler to obtain object code from the source code and a simulator to run the object code. Written document of this thesis study describes the properties of the MC6811 microcontroller and its assembly language. In addition, the document describes the cross-assembler and simulator parts of the toolkit with details. In the cross-assembler part of the toolkit, parsing of the source Code and processing of the parsed information is studied. The simulator part studies the execution of the object code generated by the crossassembler. The execution of each instruction and main functions of the microcontroller can be observed from a Graphical User Interface (GUI). The Central Processing Unit (CPU), the busses, ports and interrupts of the microcontroller are included into the GUI. C++ programming language is used to develop and to implement the toolkit.
APA, Harvard, Vancouver, ISO, and other styles
4

Martinsson, Kristoffer. "Design of Application Specific Microcontroller." Thesis, Linköping University, Department of Electrical Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1458.

Full text
Abstract:

This master thesis describes the process of designing an application specific microcontroller. The microcontroller should be used in a demonstrator for a protocol processor.

The demonstrator should show the possibilities to access high speed networks with small processor cores. The demonstrator should be able to receive and playback an audio stream. Some of the tasks in the demonstrator should be performed by the microcontroller. It should handle ARP requests, buffer handling and sending audio samples to a stereo codec. Behavioral models for these applications were constructed and used to design the instruction set for the microcontroller.

An instruction set simulator was constructed. It was used to verify that the instruction set was sufficient to achieve functional coverage.

The micro architecture for the microcontroller was designed and implemented in VHDL. This implementation was verified by simulation. The test vectors used during simulation were mainly randomly generated.

APA, Harvard, Vancouver, ISO, and other styles
5

Chepetan, Adrian. "Microcontroller based Data Acquisition System." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ62200.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Steller, Andrew. "Microcontroller Based Diagnostic Smart Inhaler." University of Cincinnati / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1445615167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ekelund, Øivind. "Low Energy AES Hardware for Microcontroller." Thesis, Norwegian University of Science and Technology, Department of Electronics and Telecommunications, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9096.

Full text
Abstract:

Cryptographic algorithms, like the Advanced Encryption Standard, are frequently used in todays electronic appliances. Battery operated devices are increasingly popular, creating a demand for low energy solutions. As a microcontroller is incorporated in virtually all electronic appliances, the main objective in this thesis is to evaluate possible hardware implementations of AES and implement a solution optimized for low energy consumption, suited for incorporation in a microcontroller. A good cost/performance balance is also a design goal. An existing solution based on a 32 bit architecture with support for 128 bit keys was chosen as a basis and altered in order to lower area and energy consumption. The alterations yielded a 13.6% area reduction as well as 14.2% and 3.9% reduction in energy consumption in encryption and decryption mode, respectively. In addition to alterations in the datapath, low energy techniques like clock gating and numerical strength reduction has been applied in order to further lower the energy consumption. The proposed architecture was also extended in order to accommodate 256 bit keys. Although this increased the area by 9.2%, the power consumption was still reduced by 7.6% and 1.3% in en- and decryption, compared to the architecture chosen as basis. As AES is an algorithm which easily can be parallelized, a high throughput solution utilizing a 128 bit datapath was implemented. This AES module is able to process 372.4 Mbps at an operating frequency of 32 Mhz and is based on the same architecture as the 32 bit datapath solution. In addition, this implementation yielded excellent energy per encryption figures, 24.5% lower than the 32 bit solution. The alternative to performing AES in a dedicated hardware module is to perform it using software. In order to have a basis for comparison, a software solution optimized for 32 bit architectures was implemented. Simulations show that the energy consumption attained when performing AES in the proposed hardware module is approximately 2.3% of what a software solution would use. In addition, the throughput is increased by a factor of 25. The architecture proposed in this thesis combines relatively high throughput with modest demands to area and low energy per encryption.

APA, Harvard, Vancouver, ISO, and other styles
8

Southard, Phillip D. "Design methodology for modeling a microcontroller." Ohio : Ohio University, 2000. http://www.ohiolink.edu/etd/view.cgi?ohiou1172868240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Andersson, Alexandra Sara Theres 1978. "An extensible microcontroller and programming environment." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/87378.

Full text
Abstract:
Thesis (M.Eng. and S.B.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2003.
Includes bibliographical references (p. 53).
by Alexandra Sara Theres Andersson.
M.Eng.and S.B.
APA, Harvard, Vancouver, ISO, and other styles
10

Gumus, Rasit. "Implementation Of A Risc Microcontroller Using Fpga." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12606694/index.pdf.

Full text
Abstract:
In this thesis a microcontroller core is developed in an FPGA. Its instruction set is compatible with the microcontroller PIC16XX series by Microchip Technology. The microcontroller employs a RISC architecture with separate busses for instructions and data. Our goal in this research is to implement and evaluate the design in the FPGA. Increasing performance and gate capacity of recent FPGA devices permits complex logic systems to be implemented on a single programmable device. Such a growing complexity demands design approaches, which can lead to designs containing millions of logic gates, memories, high-speed interfaces, and other high-performance components. In recent years, the continuous development in the area of highly integrated circuits has lead to a change in the design methods used, making it possible to economically utilize FPGAs in many designs. A test demo board from the Digilent Inc is used to fit our testing requirements of the RISC microcontroller. The test demo board also had the capability of communicating with a personal computer (PC) so that we can load the program from PC. Based on the modern design methods the microcontroller core is developed using the Verilog hardware description language. Xilinx ISE Foundation 6.3i software is used for its synthesis and implementation. An embedded test program code using MPLAB is also developed, and then loaded into the designed microcontroller residing in the FPGA. In order to perform a functional test of the microcontroller core a special test program downloader application is designed by using Borland C++ Builder. First, the specification from the PIC16XX datasheet is transferred into an abstract behavioral description. Based on that, the next step is to develop a description of the microcontroller core with some minor modifications which can be synthesizable into a FPGA. Finally, the resulting gate level netlist is evaluated and tested using a demo board.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Microcontroller"

1

Semiconductor, National. Microcontroller databook. Santa Clara: National Semiconductor Corporation, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bolanakis, Dimosthenis E. Microcontroller Education. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-031-79589-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Corporation, Intel. Microcontroller handbook. Santa Clara, CA: Intel Corporation, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Microcontroller cookbook. Oxford: Newnes, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mazidi, Muhammad Ali. PIC microcontroller. Harlow: Prentice Hall, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Corporation, National Semiconductor, ed. Microcontroller databook. Santa Clara, Calif: National Semiconductor Corp., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Corporation, Intel, ed. Microcontroller handbook. Santa Clara, Calif: Intel Corporation, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Corporation, National Semiconductor, ed. Microcontroller databook. Santa Clara, Calif: National Semiconductor Corp., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Barrett, Steven F. Arduino microcontroller processing for everyone! San Rafael, Calif. (1537 Fourth Street, San Rafael, CA 94901 USA): Morgan & Claypool, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

The 8051 microcontroller. 3rd ed. Clifton Park, NY: Thomson Delmar Learning, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Microcontroller"

1

Ng, Tian Seng. "Microcontroller." In Real Time Control Engineering, 39–77. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1509-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sadraey, Mohammad H. "Microcontroller." In Unmanned Aircraft Design, 123–37. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-031-79582-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Barrett, Steven F., and Daniel J. Pack. "Microcontroller." In Microcontrollers Fundamentals for Engineers and Scientists, 29–50. Cham: Springer International Publishing, 2006. http://dx.doi.org/10.1007/978-3-031-79737-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

AlMadhoun, Ashraf Said Ahmad. "Microcontroller." In Maker Innovations Series, 1–55. Berkeley, CA: Apress, 2023. http://dx.doi.org/10.1007/978-1-4842-9582-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Doboli, Alex, and Edward H. Currie. "Microcontroller Architecture." In Introduction to Mixed-Signal, Embedded Design, 51–102. New York, NY: Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-7446-4_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Qian, Kai, David den Haring, and Li Cao. "8051 Microcontroller." In Embedded Software Development with C, 73–96. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0606-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kramer, Joseph. "Microcontroller Sound." In Handmade Electronic Music, 351–63. Third edition. | New York : Routledge, 2020.: Routledge, 2020. http://dx.doi.org/10.4324/9780429264818-38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Di Paolo Emilio, Maurizio. "Microcontroller Design." In Embedded Systems Design for High-Speed Data Acquisition and Control, 33–48. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06865-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ziemann, Volker. "Microcontroller: Arduino." In A Hands-On Course in Sensors Using the Arduino and Raspberry Pi, 55–112. Boca Raton, FL:CRC Press, Taylor & Francis Group, [2018] | Series: Series in sensors: CRC Press, 2018. http://dx.doi.org/10.1201/9781351188319-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

El Khoury, Franjieh, and Antoine Zgheib. "Programming Microcontroller." In Building a Dedicated GSM GPS Module Tracking System for Fleet Management, 53–62. Boca Raton : Taylor & Francis, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9781351201391-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Microcontroller"

1

Williams, Keith A. "Dynamic System Simulation Using Distributed Computation Hardware." In ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/smasis2016-9212.

Full text
Abstract:
The availability of low-cost, readily programmable digital hardware offers numerous opportunities for novel modeling and control approaches. One such opportunity is the realization of hardware modeling of distributed dynamic systems. Such models could be useful for control algorithms that require high-fidelity models operating in real-time. The ultimate goal is to utilize digital systems with programmable hardware. As a proof-of-concept, multiple discrete microcontrollers have been used to emulate how programmable hardware devices may be used to simulate a distributed vibrating system. Specifically, each microcontroller is treated as a single vibrating mass with stiffness and damping coupling between the masses. Each microcontroller has associated position and velocity variables. The only additional knowledge required to compute the acceleration of each “mass” is thus the position and velocity of each immediate neighboring mass/microcontroller. The computation time is independent of the number of nodes; adding nodes results in no reduction in processing speed. Consequently, the computational approach will be applicable to very high order models. Practical implementation of such models will require digitally programmable hardware such as field-programmable gate arrays (FPGA), however an added benefit will be a still greater reduction in cost, as multiple microcontrollers are replaced by a single FPGA. It is expected that the hardware modeling approach described in this work will have application not only in the field of vibration modeling and control, but also in other fields where control of distributed dynamic systems is desired.
APA, Harvard, Vancouver, ISO, and other styles
2

Krauss, Ryan W. "Sensor Fusion for Vibration Suppression Implemented on Arduino and Raspberry Pi." In ASME 2015 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/dscc2015-9816.

Full text
Abstract:
Arduino microcontrollers are popular and easy-to-program and can be a great option for student-owned control hardware or other embedded control applications. This paper investigates whether or not an Arduino microcontroller has the computational power to implement a sensor fusion observer/controller for vibration suppression of a slewing beam. An additional approach based on combining the Arduino with a Raspberry Pi is also investigated. Somewhat surprisingly, an Arduino microcontroller is experimentally shown to be capable of implementing a sensor fusion observer and state-space controller for a system with seven states. The floating-point matrix calculations are completed in roughly 2 milli-seconds, implying that real-time feedback control could have update frequencies in the range of 100–400 Hz. Additionally, sensor fusion leads to slight performance improvements over using just one sensor.
APA, Harvard, Vancouver, ISO, and other styles
3

Fischer, Thomas, and Julia Scheidinger. "VISIR - Microcontroller extensions." In 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV). IEEE, 2015. http://dx.doi.org/10.1109/rev.2015.7087287.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rogers, John R., and R. Clayton McVay. "Graphical microcontroller programming." In 2012 IEEE Conference on Technologies for Practical Robot Applications (TePRA). IEEE, 2012. http://dx.doi.org/10.1109/tepra.2012.6215653.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abdallah, M. "Semi-human microcontroller." In SoutheastCon 2015. IEEE, 2015. http://dx.doi.org/10.1109/secon.2015.7132874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jacko, Patrik, Milan Guzan, and Andrii Kalinov. "Remote Microcontroller Scanner Design for STM32 Microcontrollers Used to Distance Education Form." In 2021 IEEE International Conference on Modern Electrical and Energy Systems (MEES). IEEE, 2021. http://dx.doi.org/10.1109/mees52427.2021.9598723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Krauss, Ryan W. "Evaluation of a Low-Cost Microcontroller for Real-Time Control Education and Prototyping." In ASME 2014 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/dscc2014-5846.

Full text
Abstract:
Arduino microcontrollers are popular, low-cost, easy-to-program, and have an active user community. This paper seeks to quantitatively assess whether or not Arduinos are a good fit for real-time feedback control experiments and controls education. Bode plots and serial echo tests are used to assess the use of Arduinos in two scenarios: a prototyping mode that involves bidirectional real-time serial communication with a PC and a hybrid mode that streams data in real-time over serial. The closed-loop performance with the Arduino is comparable to that of another more complicated and more expensive microcontroller for the plant considered. Some practical tips on using an Arduino for real-time feedback control are also given.
APA, Harvard, Vancouver, ISO, and other styles
8

Solmaz, Hakan, Yekta Ulgen, and Murat Tumer. "Microcontroller based bioimpedance analyzer." In 2009 14th National Biomedical Engineering Meeting. IEEE, 2009. http://dx.doi.org/10.1109/biyomut.2009.5130264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Demir, Batikan Erdem, Funda Yorulmaz, and Inan Guler. "Microcontroller controlled ECG simulator." In 2010 15th National Biomedical Engineering Meeting (BIYOMUT 2010). IEEE, 2010. http://dx.doi.org/10.1109/biyomut.2010.5479789.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ahmed, Mirza Shoaib, Iqbal Muhammad Umair, and Kashif Mehboob. "Microcontroller Based IC Tester." In 2005 Student Conference on Engineering Sciences and Technology. IEEE, 2005. http://dx.doi.org/10.1109/sconest.2005.4382884.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Microcontroller"

1

Jason Larsen and Jerel Culliss. INL High Level Language Microcontroller Implementa. Office of Scientific and Technical Information (OSTI), September 2012. http://dx.doi.org/10.2172/1086822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Papachristou, Christos A. Structured Microcontroller Design Using PLA Firmware. Fort Belvoir, VA: Defense Technical Information Center, December 1985. http://dx.doi.org/10.21236/ada164255.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Henderson, Rashaunda, and David McMasters. Study of Direct RF Injection on Microcontroller. Fort Belvoir, VA: Defense Technical Information Center, June 2013. http://dx.doi.org/10.21236/ada586914.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Quinn, Heather, Thomas Fairbanks, and Justin Tripp. Preliminary Analysis of Texas Instrument Hercules Flash-based Microcontroller. Office of Scientific and Technical Information (OSTI), July 2014. http://dx.doi.org/10.2172/1136466.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Quinn, Heather Marie, and Thomas D. Fairbanks. Preliminary Analysis of Texas Instrument Hercules Flash-based Microcontroller. Office of Scientific and Technical Information (OSTI), July 2013. http://dx.doi.org/10.2172/1086756.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Edwards, R. Sieve of Eratosthenes benchmarks for the Z8 FORTH microcontroller. Office of Scientific and Technical Information (OSTI), February 1989. http://dx.doi.org/10.2172/6426125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Edwards, R. Evaluation of single-board microcontroller suitable for rapid prototyping. Office of Scientific and Technical Information (OSTI), February 1987. http://dx.doi.org/10.2172/6472103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Edwards, R. Optimizing the Zilog Z8 FORTH microcontroller for rapid prototyping. Office of Scientific and Technical Information (OSTI), September 1987. http://dx.doi.org/10.2172/6056051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Makowiec, Sara L., Mark Doxbeck, and Mark Johnson. Analog Microcontroller Model for an Energy Harvesting Round Counter. Fort Belvoir, VA: Defense Technical Information Center, July 2012. http://dx.doi.org/10.21236/ada583512.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Clarke, Timothy, David Dietz, and David French. Modeling of Radio-Frequency Effects on a Microcontroller (POSTPRINT). Fort Belvoir, VA: Defense Technical Information Center, September 2012. http://dx.doi.org/10.21236/ada590091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography