Relevant bibliographies by topics / Micromechanics

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Micromechanics'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 August 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Micromechanics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Micromechanics"

1

Mahesh, C., K. Govindarajulu, and V. Balakrishna Murthy. "Simulation-based verification of homogenization approach in predicting effective thermal conductivities of wavy orthotropic fiber composite." International Journal of Computational Materials Science and Engineering 08, no. 04 (September 24, 2019): 1950015. http://dx.doi.org/10.1142/s2047684119500155.

Full text
Abstract:
In this work, applicability of homogenization approach is verified with the micromechanics approach by considering wavy orthotropic fiber composite. Thermal conductivities of [Formula: see text]-300 orthotropic wavy fiber composite are determined for micromechanical model and compared with the results obtained by two stage homogenized model over volume fraction ranging from 0.1 to 0.6. Also, a methodology is suggested for reducing percentage deviation between homogenization and micromechanical approaches. Effect of debond on the thermal conductivities of wavy orthotrophic fiber composite is studied and compared with perfectly aligned fiber composite for different volume fraction. It is observed that results obtained by the homogenization approach are in good agreement with the results obtained through micromechanics approach. Maximum percentage deviation between homogenized and micromechanics models is 2.13%.
APA, Harvard, Vancouver, ISO, and other styles
2

Kim, Young Cheol, Hong-Kyu Jang, Geunsu Joo, and Ji Hoon Kim. "A Comparative Study of Micromechanical Analysis Models for Determining the Effective Properties of Out-of-Autoclave Carbon Fiber–Epoxy Composites." Polymers 16, no. 8 (April 14, 2024): 1094. http://dx.doi.org/10.3390/polym16081094.

Full text
Abstract:
This study aims to critically assess different micromechanical analysis models applied to carbon-fiber-reinforced plastic (CFRP) composites, employing micromechanics-based homogenization to accurately predict their effective properties. The paper begins with the simplest Voigt and Reuss models and progresses to more sophisticated micromechanics-based models, including the Mori–Tanaka and Method of Cells (MOC) models. It provides a critical review of the areas in which these micromechanics-based models are effective and analyses of their limitations. The numerical analysis results were confirmed through finite element simulations of the periodic representative volume element (RVE). Furthermore, the effective properties predicted by these micromechanics-based models were validated via experiments conducted on IM7/5320-1 composite material with a fiber volume fraction of 0.62.
APA, Harvard, Vancouver, ISO, and other styles
3

Ovid'ko, I. A. "Micromechanics of fracturing in nanoceramics." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 373, no. 2038 (March 28, 2015): 20140129. http://dx.doi.org/10.1098/rsta.2014.0129.

Full text
Abstract:
An overview of key experimental data and theoretical representations on fracture processes in nanoceramics is presented. The focuses are placed on crack growth in nanoceramics and their toughening micromechanics. Conventional toughening micromechanisms are discussed which effectively operate in both microcrystalline-matrix ceramics containing nanoinclusions and nanocrystalline-matrix ceramics. Particular attention is devoted to description of special (new) toughening micromechanisms related to nanoscale deformation occurring near crack tips in nanocrystalline-matrix ceramics. In addition, a new strategy for pronounced improvement of fracture toughness of ceramic materials through fabrication of ceramic–graphene nanocomposites is considered. Toughening micromechanisms are discussed which operate in such nanocomposites containing graphene platelets and/or few-layer sheets.
APA, Harvard, Vancouver, ISO, and other styles
4

Sertse, Hamsasew M., Johnathan Goodsell, Andrew J. Ritchey, R. Byron Pipes, and Wenbin Yu. "Challenge problems for the benchmarking of micromechanics analysis: Level I initial results." Journal of Composite Materials 52, no. 1 (April 3, 2017): 61–80. http://dx.doi.org/10.1177/0021998317702437.

Full text
Abstract:
Because of composite materials’ inherent heterogeneity, the field of micromechanics provides essential tools for understanding and analyzing composite materials and structures. Micromechanics serves two purposes: homogenization or prediction of effective properties and dehomogenization or recovery of local fields in the original heterogeneous microstructure. Many micromechanical tools have been developed and codified, including commercially available software packages that offer micromechanical analyses as stand-alone tools or as part of an analysis chain. With the increasing number of tools available, the practitioner must determine which tool(s) provides the most value for the problem at hand given budget, time, and resource constraints. To date, simple benchmarking examples have been developed in an attempt to address this challenge. The present paper presents the benchmark cases and results from the Micromechanical Simulation Challenge hosted by the Composites Design and Manufacturing HUB. The challenge is a series of comprehensive benchmarking exercises in the field of micromechanics against which such tools can be compared. The Level I challenge problems consist of six microstructure cases, including aligned, continuous fibers in a matrix, with and without an interphase; a cross-ply laminate; spherical inclusions; a plain-weave fabric; and a short-fiber microstructure with “random” fiber orientation. In the present phase of the simulation challenge, the material constitutive relations are restricted to linear thermoelastic. Partial results from DIGIMAT-MF, ESI VPS, MAC/GMC, finite volume direct averaging method, Altair MDS, SwiftComp, and 3D finite element analysis are reported. As the challenge is intended to be ongoing, the full results are hosted and updated online at www.cdmHUB.org .
APA, Harvard, Vancouver, ISO, and other styles
5

Jones, Christopher A. R., Matthew Cibula, Jingchen Feng, Emma A. Krnacik, David H. McIntyre, Herbert Levine, and Bo Sun. "Micromechanics of cellularized biopolymer networks." Proceedings of the National Academy of Sciences 112, no. 37 (August 31, 2015): E5117—E5122. http://dx.doi.org/10.1073/pnas.1509663112.

Full text
Abstract:
Collagen gels are widely used in experiments on cell mechanics because they mimic the extracellular matrix in physiological conditions. Collagen gels are often characterized by their bulk rheology; however, variations in the collagen fiber microstructure and cell adhesion forces cause the mechanical properties to be inhomogeneous at the cellular scale. We study the mechanics of type I collagen on the scale of tens to hundreds of microns by using holographic optical tweezers to apply pN forces to microparticles embedded in the collagen fiber network. We find that in response to optical forces, particle displacements are inhomogeneous, anisotropic, and asymmetric. Gels prepared at 21 °C and 37 °C show qualitative difference in their micromechanical characteristics. We also demonstrate that contracting cells remodel the micromechanics of their surrounding extracellular matrix in a strain- and distance-dependent manner. To further understand the micromechanics of cellularized extracellular matrix, we have constructed a computational model which reproduces the main experiment findings.
APA, Harvard, Vancouver, ISO, and other styles
6

Takahashi, Kiyoshi. "Micromechanics." Kobunshi 36, no. 10 (1987): 726–29. http://dx.doi.org/10.1295/kobunshi.36.726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brighenti, Roberto, Federico Artoni, and Mattia Pancrazio Cosma. "Viscous and Failure Mechanisms in Polymer Networks: A Theoretical Micromechanical Approach." Materials 12, no. 10 (May 14, 2019): 1576. http://dx.doi.org/10.3390/ma12101576.

Full text
Abstract:
Polymeric materials typically present a complex response to mechanical actions; in fact, their behavior is often characterized by viscous time-dependent phenomena due to the network rearrangement and damage induced by chains’ bond scission, chains sliding, chains uncoiling, etc. A simple yet reliable model—possibly formulated on the basis of few physically-based parameters—accounting for the main micro-scale micromechanisms taking place in such a class of materials is required to properly describe their response. In the present paper, we propose a theoretical micromechanical approach rooted in the network’s chains statistics which allows us to account for the time-dependent response and for the chains failure of polymer networks through a micromechanics formulation. The model is up-scaled to the mesoscale level by integrating the main field quantities over the so-called ‘chains configuration space’. After presenting the relevant theory, its reliability is verified through the analysis of some representative tests, and some final considerations are drawn.
APA, Harvard, Vancouver, ISO, and other styles
8

Ortiz, M. "Computational micromechanics." Computational Mechanics 18, no. 5 (September 1996): 321–38. http://dx.doi.org/10.1007/bf00376129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ortiz, M. "Computational micromechanics." Computational Mechanics 18, no. 5 (September 1, 1996): 321–38. http://dx.doi.org/10.1007/s004660050151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lindroos, Matti, Anssi Laukkanen, and Tom Andersson. "Micromechanical modeling of polycrystalline high manganese austenitic steel subjected to abrasive contact." Friction 8, no. 3 (December 19, 2019): 626–42. http://dx.doi.org/10.1007/s40544-019-0315-1.

Full text
Abstract:
AbstractThis study focuses on microstructural and micromechanical modeling of abrasive sliding contacts of wear-resistant Hadfield steel. 3D finite element representation of the microstructure was employed with a crystal plasticity model including dislocation slip, deformation twinning, and their interactions. The results showed that deformation twinning interacting with dislocations had a key role in the surface hardening of the material, and it was also important for the early hardening process of the sub-surface grains beyond the heavily distorted surface grains. The effects of grain orientation and microstructural features were discussed and analyzed according to the micromechanical model to give a perspective to the anisotropy of the material and the feasibility of using micromechanics in virtual material design.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Micromechanics"

1

Evans, Christabel. "Micromechanisms and micromechanics of Zircaloy-4." Thesis, Imperial College London, 2014. http://hdl.handle.net/10044/1/14335.

Full text
Abstract:
The micromechanisms of Zircaloy-4 are investigated in relation to texture evolution, hydride formation and fatigue. The Zircaloy-4 plate used throughout this thesis was provided by Rolls- Royce plc, Derby, and was annealed post unidirectional rolling. The effect of strain rate on the texture evolution of Zircaloy-4 was investigated to understand how different processing methods would effect the final texture. Texture evolution during high temperature (550◦C) compression and tension tests were investigated using synchrotron X- ray diffraction in the transverse and rolling directions (TD and RD) at strain rates ranging from 10−4s−1 to 10−1s−1. The post deformation microstructures showed the presence of twins at the higher strain rates (10−1s−1 to 10−2s−1 ), with minimal twinning seen at the slower rates. The pole figures obtained throughout testing showed no texture evolution during tensile testing, regardless of strain rate and the basal poles remained orientated ±30◦between the normal direction (ND) and the transverse direction (TD), which is the original texture for the as received material. During the compression tests specimens tested in the RD showed an evolution in the pole figures as strain rate was increased. At a strain rate of 10−1s−1 a reorientation of the basal poles to lie almost solely in the RD was seen, indicative of twinning. As the strain rate was reduced, this effect diminished and at a strain rate of 10−4s−1only a slight rotation of the basal poles was observed. The Kearns’ factor evolution with strain confirmed this result. These results were then used in an elasto-plastic self-consistent model to simulate the slip and twin levels during deformation. The computational results were consistent with the notion that increasing the strain rate increased twin density, as shown in the post deformation microstructures. To understand the micromechanical effects hydride precipitates have on the alloy, a section of the alloy was charged with hydrogen in a vacuum furnace to 375 ppm ± 50 ppm. Microstructural characterisation of the material indicated that high levels of hydrides forming predominantly at grain boundaries. Nanoindentation tests were carried out at room temperature on individual hydride packets, the surrounding matrix and the as received material to characterise the me- chanical properties. The results obtained from these tests were used in computational modelling scenarios to determine more accurate mechanical properties. The nano-hardness of the matrix was found to be highest (4.64 GPa), followed by the matrix and the as received material (3.62 GPa and 2.74 GPa respectively). As part of the initial scope of this thesis it was the author’s original intention to understand how the presence of hydrides affects dislocation propagation and micro-deformation mechanisms. However, since carrying out the experimental procedures and results analysis, a number of papers have come to the author’s attention which outline the importance of the final processing steps prior to testing. It has been found that mechanical polishing as a method for material preparation induces work hardening into the surface of the material. Although this does not have an affect in macro and indeed micro scale hardness testing, where the tested layer is in the scale of a few microns, this work hardened layer does have a major effect in nano-hardness tests, where the testing layer is in the region of nanometers. As a result of this no dislocation analysis was carried out as it would be impossible to distinguish between dislocations present from mechanical polishing and those induced by the presence of hydrides. In spite of the work hardened layer rendering the absolute hardness values invalid, the relative values in relation to the matrix, hydride and as received material are still of interest. High cycle fatigue tests were carried out on samples taken from the rolling and the transverse direction of the material. Fractographic examination of the samples showed facets in the area immediately surrounding the initiation site. There were only found to be between 10-20 faceted grains, which were confined to this region. These features showed feather-like characteristics, indicative of plastic deformation. Site specific transmission electron microscopy (TEM) was carried out on the initiation facets, showing mostly dislocations, although and imperfect dislocations segments were also found to be present. The low dislocation density in these features compared to that of titanium suggests that these features may be quite brittle in nature. Crack propagation was found to occur via striated crack growth. The direction of the striations appear to be affected by grain orientation. TEM analysis of the underlying grain did not show the presence of any dislocations. It is thought that this may be a result of image stresses causing the dislocation to evaporate out the TEM specimen once it is removed from the fracture surface, although further work needs to be done to confirm this.
APA, Harvard, Vancouver, ISO, and other styles
2

Yap, Siaw Fung. "Micromechanics and powder compaction." Thesis, University of Birmingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.489036.

 Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Olsson, Erik. "Micromechanics of Powder Compaction." Doctoral thesis, KTH, Hållfasthetslära (Avd.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-159142.

Full text
Abstract:
Compaction of powders followed by sintering is a convenient manufacturing method for products of complex shape and components of materials that are difficult to produce using conventional metallurgy. During the compaction and the handling of the unsintered compact, defects can develop which could remain in the final sintered product. Modeling is an option to predict these issues and in this thesis micromechanical modeling of the compaction and the final components is discussed. Such models provide a more physical description than a macroscopic model, and specifically, the Discrete Element Method (DEM) is utilized. An initial study of the efect of particle size distribution, performed with DEM, was presented in Paper A. The study showed that this effect is small and is thus neglected in the other DEM studies in this thesis. The study also showed that good agreement with experimental data can be obtained if friction effects is correctly accounted for. The most critical issue for accurate results in the DEM simulations is the modeling of normal contact between the powder particles. A unified treatment of this problem for particles of a strain hardening elastic-plastic material is presented in Paper B. Results concerning both the elastic-plastic loading, elastic unloading as well as the adhesive bonding between the particles is included. All results are compared with finite element simulation with good agreement with the proposed model. The modeling of industry relevant powders, namely spray dried granules is presented in Paper C. The mechanical behavior of the granules is determined using two types of micromechanical experiments, granule compression tests and nanoindentation testing. The determined material model is used in an FEM simulation of two granules in contact. The resulting force-displacement relationships are exported to a DEM analysis of the compaction of the granules which shows very good agreement with corresponding experimental data. The modeling of the tangential forces between two contacting powder particles is studied in Paper D by an extensive parametric study using the finite element method. The outcome are correlated using normalized parameters and the resulting equations provide the tangential contact force as function of the tangential displacement for different materials and friction coefficients. Finally, in Paper E, the unloading and fracture of powder compacts, made of the same granules as in Paper C, are studied both experimentally and numerically. A microscopy study showed that fracture of the powder granules might be of importance for the fracture and thus a granule fracture model is presented and implemented in the numerical model. The simulations show that incorporating the fracture of the granules is essential to obtain agreement with the experimental data.

QC 20150122

APA, Harvard, Vancouver, ISO, and other styles
4

Borodulina, Svetlana. "Micromechanics of Fiber Networks." Doctoral thesis, KTH, Hållfasthetslära (Inst.), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188481.

Full text
Abstract:
The current trends in papermaking involve, but are not limited to, maintaining the dry strength of paper material at a reduced cost. Since any small changes in the process affect several factors at once, it is difficult to relate the exact impact of these changes promptly. Hence, the detailed models of the network level of a dry sheet have to be studied extensively in order to attain the infinitesimal changes in the final product. In Paper A, we have investigated a relation between micromechanical processes and the stress–strain curve of a dry fiber network during tensile loading. The impact of “non-traditional” bonding parameters, such as compliance of bonding regions, work of separation and the actual number of effective bonds, is discussed. In Paper B, we studied the impact of the chemical composition of the fiber cell wall, as well as its geometrical properties, on the fiber mechanical properties using the three-dimensional model of a fiber with helical orientation of microfibrils at a range of different microfibril angles (MFA). In order to accurately characterize the fiber and bond properties inside the network, via statistical distributions, microtomography studies on the handsheets have been carried out. This work is divided into two parts: Paper C, which describes the methods of data acquisition and Paper D, where we discuss the extracted data. Here, all measurements were performed at a fiber level, providing data on the fiber width distribution, width-to-height ratio of isotropically oriented fibers and contact density. In the last paper, we utilize data thus obtained in conjunction with fiber morphology data from Papers C and D to update the network generation algorithm in order to produce more realistic fiber networks. We also successfully verified the models with the help of experimental results from dry sheets tested under uniaxial tensile tests. We carry out numerical simulations on these networks to ascertain the influence of fiber and bond parameters on the network strength properties.

QC 20160613

APA, Harvard, Vancouver, ISO, and other styles
5

Lei, Sheng-Yuan. "Deformation micromechanics in composite structures." Thesis, University of Manchester, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Langroudi, Arya Assadi. "Micromechanics of collapse in loess." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5284/.

Full text
Abstract:
Soil collapse is amongst one of the most significant ground related hazards. A collapsible soil, in particular loess, typically has an open-structure and collapse occurs when as a consequence of the addition of water and/or load the particles rearrange to form a more dense fabric. Collapse leads to a suite of problems for buildings and infrastructures built on or in collapsing soil. Treatment to mitigate collapse often involves in densification. However, such approaches have been reported not always effective enough to combat the problem. This stems from a lack of understanding of soils’ geochemistry and structure, the result of which is an oversimplification of complex geotechnical and geological interactions. An important example of such limited knowledge is the increasing evidence of restoration of the collapsing structure upon wetting-drying cycles, which is widely ignored in the current compaction practice. This research aims to first identifying collapse micro-mechanisms in fine-grained soils, examining the contribution of a handful of soil constituents in collapsibility, and finally developing a practical tool for ground engineers to evaluate the efficiency of the current compaction practice for systematically classified fine-grained soils, and to take modified/novel earthwork approaches where the current practice fails to fully remove the collapse risk.
APA, Harvard, Vancouver, ISO, and other styles
7

Ciomocos, M. T. "Micromechanics of agglomerate damage processes." Thesis, Aston University, 1996. http://publications.aston.ac.uk/14149/.

Full text
Abstract:
This thesis reports a detailed investigation of the micromechanics of agglomerate behaviour under free-fall impact, double (punch) impact and diametrical compression tests using the simulation software TRUBAL. The software is based on the discrete element method (DEM) which incorporates the Newtonian equations of motion and contact mechanics theory to model the interparticle interactions. Four agglomerates have been used: three dense (differing in interface energy and contact density) and one loose. Although the simulated agglomerates are relatively coarse-grained, the results obtained are in good agreement with laboratory test results reported in the literature. The computer simulation results show that, in all three types of test, the loose agglomerate cannot fracture as it is unable to store sufficient elastic energy. Instead, it becomes flattened for low loading-rates and shattered or crushed at higher loading-rates. In impact tests, the dense agglomerates experience only local damage at low impact velocities. Semi-brittle fracture and fragmentation are produced over a range of higher impact velocities and at very high impact velocities shattering occurs. The dense agglomerates fracture in two or three large fragments in the diametrical compression tests. Local damage at the agglomerate-platen interface always occurs prior to fracture and consists of local bond breakage (microcrack formation) and local dislocations (compaction). The fracture process is dynamic and much more complex than that suggested by continuum fracture mechanics theory. Cracks are always initiated from the contact zones and propagate towards the agglomerate centre. Fracture occurs a short time after the start of unloading when a fracture crack "selection" process takes place. The detailed investigation of the agglomerate damage processes includes an examination of the evolution of the fracture surface. Detailed comparisons of the behaviour of the same agglomerate in all three types of test are presented. The particle size distribution curves of the debris are also examined, for both free-fall and double impact tests.
APA, Harvard, Vancouver, ISO, and other styles
8

Gong, Lei. "Deformation micromechanics of graphene nanocomposites." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/deformation-micromechanics-of-graphene-nanocomposites(b4e4780d-738f-4629-9dbb-151b1230bd52).html.

Full text
Abstract:
Graphene nanocomposites have been successfully prepared in this study in the form of a sandwich structure of PMMA/graphene/SU-8. It has been proved that Raman spectroscopy is a powerful technique in the characterisation of the structure and deformation of graphene. The 2D band of the monolayer graphene has been used in the investigation of stress transfer in the graphene reinforced nanocomposites. It has been demonstrated that the 2D band moves towards low frequency linearly under tensile stress, which is shown to be significant method of monitoring the strain in graphene in a deformed specimen. The Raman spectroscopy behaviour under deformation validates that the monolayer graphene acts as a reinforcing role in nanocomposites although it is only one atom thick.A systematic investigation of the deformation of bilayer, trilayer and few-layer graphene has been undertaken with a view to determine the optimum number of layers for the reinforcement of nanocomposites. It has been demonstrated that monolayer graphene is not necessarily the optimum material to use for reinforcement in graphene-based polymer nanocomposites and bilayer graphene will be equally as good as monolayer graphene. There is therefore a balance to be struck in the design of graphene-based nanocomposites between the ability to achieve higher loadings of reinforcement and the reduction in effective Young’s modulus of the reinforcement, as the number of layers in the graphene is increased.Both the G and 2D bands have been found to undergo splitting under high strain levels or asymmetric band broadening in lower strain deformation. The G band polarisation property has been utilized to determine the crystallographic orientation of monolayer graphene by measuring the intensity ratio of G-/G+ bands. Analogously, the 2D band also undergoes strain-induced splitting where the 2D- band has higher Raman shift rate than that of the 2D+ band.
APA, Harvard, Vancouver, ISO, and other styles
9

Pantina, John Peter. "Interactions and micromechanics of colloidal aggregates /." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file 2.77 Mb., 193 p, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:3221138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Russell, Benjamin Peter. "The micromechanics of composite lattice materials." Thesis, University of Cambridge, 2010. https://www.repository.cam.ac.uk/handle/1810/252176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Micromechanics"

1

Suquet, P., ed. Continuum Micromechanics. Vienna: Springer Vienna, 1997. http://dx.doi.org/10.1007/978-3-7091-2662-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jiang, Dazhi. Continuum Micromechanics. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-23313-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pierre, Suquet, ed. Continuum micromechanics. Wien: Springer, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weng, G. J., M. Taya, and H. Abé, eds. Micromechanics and Inhomogeneity. New York, NY: Springer New York, 1990. http://dx.doi.org/10.1007/978-1-4613-8919-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ananthasuresh, Gondi Kondaiah, Burkhard Corves, and Victor Petuya, eds. Micromechanics and Microactuators. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-2721-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nomura, Seiichi. Micromechanics with Mathematica. Chichester, UK: John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781118384923.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Šejnoha, Michal. Micromechanics in practice. Ashurst, Southhampton, UK: WIT Press, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Le, Khanh Chau. Introduction to micromechanics. Hauppauge, N.Y: Nova Science, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Adams, Donald Frederick. Delamination micromechanics analysis. Laramie, Wyo: University of Wyoming, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yallee, Rahman Bin. Single-fibre composite micromechanics. Manchester: UMIST, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Micromechanics"

1

Kussul, Ernst, Tatiana Baidyk, and Donald C. Wunsch. "Micromechanics." In Neural Networks and Micromechanics, 141–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-02535-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chawla, Nikhilesh, and Krishan K. Chawla. "Micromechanics." In Metal Matrix Composites, 121–62. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-9548-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Böhm, Helmut J. "Micromechanics." In Encyclopedia of Continuum Mechanics, 1–8. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-53605-6_10-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cheng, Alexander H. D. "Micromechanics." In Poroelasticity, 83–112. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-25202-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Böhm, Helmut J. "Micromechanics." In Encyclopedia of Continuum Mechanics, 1621–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-55771-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Öchsner, Andreas. "Micromechanics." In Advanced Structured Materials, 13–56. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32390-4_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tvergaard, V. "Computational Micromechanics." In Modeling of Defects and Fracture Mechanics, 119–64. Vienna: Springer Vienna, 1993. http://dx.doi.org/10.1007/978-3-7091-2716-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kraynik, Andrew M., Michael K. Neilsen, Douglas A. Reinelt, and William E. Warren. "Foam Micromechanics." In Foams and Emulsions, 259–86. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9157-7_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Romero, P. V. "Alveolar micromechanics." In Basics of Respiratory Mechanics and Artificial Ventilation, 119–31. Milano: Springer Milan, 1999. http://dx.doi.org/10.1007/978-88-470-2273-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Barbero, Ever J. "Computational Micromechanics." In Finite Element Analysis of Composite Materials using Abaqus®, 221–56. 2nd ed. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003108153-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Micromechanics"

1

STOCK, T., P. BELLINI, P. MURTHY, and C. CHAMIS. "Probabilistic composite micromechanics." In Advanced Marine Systems Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1988. http://dx.doi.org/10.2514/6.1988-2375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hudspeth, A. J. "Micromechanics of hearing." In MECHANICS OF HEARING: PROTEIN TO PERCEPTION: Proceedings of the 12th International Workshop on the Mechanics of Hearing. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4939314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Christenson, Todd R., Henry Guckel, Kenneth J. Skrobis, and J. Klein. "Micromechanics for actuators." In SPIE's International Symposium on Optical Engineering and Photonics in Aerospace Sensing, edited by Jacques G. Verly and Sharon S. Welch. SPIE, 1994. http://dx.doi.org/10.1117/12.179621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guckel, H. "Micromechanics For X-Ray Lithography And X-Ray Lithography For Micromechanics." In 33rd Annual Techincal Symposium, edited by Daniel Vukobratovich. SPIE, 1989. http://dx.doi.org/10.1117/12.962936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

GÖPFERT, M. C., and D. ROBERT. "MICROMECHANICS OF DROSOPHILA AUDITION." In Proceedings of the International Symposium. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812704931_0042.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aspelmeyer, Markus. "Quantum-Optical Control of Micromechanics." In Laser Science. Washington, D.C.: OSA, 2008. http://dx.doi.org/10.1364/ls.2008.lmc2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

RICHTER, C. P., and P. DALLOS. "MICROMECHANICS IN THE GERBIL HEMICOCHLEA." In Proceedings of the International Symposium. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812704931_0039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fan, Long-Sheng, and H. Jonathon Mamin. "Micromechanics applications in data storage." In Smart Structures & Materials '95, edited by Vijay K. Varadan. SPIE, 1995. http://dx.doi.org/10.1117/12.210466.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nadkarni, Seemantini K. "Laser Speckle Rheology and Micromechanics." In Optical Molecular Probes, Imaging and Drug Delivery. Washington, D.C.: OSA, 2017. http://dx.doi.org/10.1364/omp.2017.omm4d.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alava, M. J., and K. J. Niskanen. "Performance of Reinforcement Fibres in Paper." In The Fundamentals of Papermaking Materials, edited by C. F. Baker. Fundamental Research Committee (FRC), Manchester, 1997. http://dx.doi.org/10.15376/frc.1997.2.1177.

Full text
Abstract:
Paper properties can be controlled by mixing different furnishes . The outcome of the elastic, strength and toughness properties is analyzed in this work using results from other fields of material science . particularly from composites . We discuss the micromechanics of reinforcement fibres, their conformability to the background fibre web and the fracture processes in reinforced paper. Reinforcement fibres should have high ductility and they be similar to the mechanical furnish in their micromechanical stiffness.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Micromechanics"

1

Krajcinovic, Dusanr. Micromechanics of Concrete. Fort Belvoir, VA: Defense Technical Information Center, January 1988. http://dx.doi.org/10.21236/ada193433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mura, T. Micromechanics of Defects. Fort Belvoir, VA: Defense Technical Information Center, March 1992. http://dx.doi.org/10.21236/ada248432.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lemaitre, Jean, and Rene Billardon. Micromechanics of Fatigue. Fort Belvoir, VA: Defense Technical Information Center, May 1990. http://dx.doi.org/10.21236/ada229403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chiang, Fu-Pen. Experimental Micromechanics Study of Lamellar TiA1. Fort Belvoir, VA: Defense Technical Information Center, February 2007. http://dx.doi.org/10.21236/ada464768.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kingman, P. W. Unique Aspects of Micromechanics in Ballistic Penetration. Fort Belvoir, VA: Defense Technical Information Center, July 1997. http://dx.doi.org/10.21236/ada329040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yuan, F. G. Micromechanics Failure of Fiber Reinforced Composite Laminates. Fort Belvoir, VA: Defense Technical Information Center, December 2002. http://dx.doi.org/10.21236/ada413356.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ita, Stacey Leigh. Contact micromechanics in granular media with clay. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/28325.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Maji, Arup K. Micromechanics of Smart Materials for Large Deployable Mirrors. Fort Belvoir, VA: Defense Technical Information Center, April 2004. http://dx.doi.org/10.21236/ada430843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jeyapalan, Jey K., M. Thiyagaram, and W. E. Saleira. Micromechanics Models for Unsaturated, Saturated, and Dry Sands. Fort Belvoir, VA: Defense Technical Information Center, January 1988. http://dx.doi.org/10.21236/ada189727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ghoniem, N. M. Radiation effects and micromechanics of SiC/SiC composites. Office of Scientific and Technical Information (OSTI), January 1991. http://dx.doi.org/10.2172/6181622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Micromechanics' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography