Academic literature on the topic 'Microporous membrane'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microporous membrane.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Microporous membrane"

1

Drioli, E., V. Calabro, and Y. Wu. "Microporous membranes in membrane distillation." Pure and Applied Chemistry 58, no. 12 (1986): 1657–62. http://dx.doi.org/10.1351/pac198658121657.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ozawa, K., K. Ohashi, T. Ide, and K. Sakai. "Technical Evaluation of Newly-Developed Inorganic Membranes for Plasma Fractionation." International Journal of Artificial Organs 12, no. 3 (1989): 195–99. http://dx.doi.org/10.1177/039139888901200311.

Full text
Abstract:
Constant transmembrane pressure experiments were made by crossflow filtration to clarify sieving characteristics of microporous glass membranes for plasma fractionation. The distribution of pore diameters is more limited in the microporous glass membranes than in currently utilized synthetic polymer membranes. The filtration resistance of the concentration polarization layer is the dominant factor in plasma fractionation. Proteins are separated more sharply with a higher wall shear rate because of destruction of the concentration polarization layer formed on membrane surfaces. Plasma fractiona
APA, Harvard, Vancouver, ISO, and other styles
3

Nakamura, Shunichi, and Yukio Mizutani. "Microporous Polyolefine Sheets." membrane 19, no. 2 (1994): 141–43. http://dx.doi.org/10.5360/membrane.19.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, R. T., M. G. Jamieson, and R. Callahan. "SEM/FESEM imaging of lamellar structures in melt extruded polyethylene films." Proceedings, annual meeting, Electron Microscopy Society of America 50, no. 2 (1992): 1142–43. http://dx.doi.org/10.1017/s0424820100130341.

Full text
Abstract:
“Row lamellar” structures have previously been observed when highly crystalline polymers are melt-extruded and recrystallized under high stress. With annealing to perfect the stacked lamellar superstructure and subsequent stretching in the machine (extrusion) direction, slit-like micropores form between the stacked lamellae. This process has been adopted to produce polymeric membranes on a commercial scale with controlled microporous structures. In order to produce the desired pore morphology, row lamellar structures must be established in the membrane precursors, i.e., as-extruded and anneale
APA, Harvard, Vancouver, ISO, and other styles
5

Chung, Tai-Shung. "A Review of Microporous Composite Polymeric Membrane Technology for Air-Separation." Engineering Plastics 4, no. 4 (1996): 147823919600400. http://dx.doi.org/10.1177/147823919600400407.

Full text
Abstract:
A detailed review of the fabrication technology of microporous composite polymeric membranes has been conducted. We believe that this type of membrane has greater potential than the traditional asymmetric-composite membranes to be used for the development of the third generation of gas-separation membranes. However, there are four major challenges when preparing a high-performance microporous composite membrane: namely, eliminating pore intrusion, reducing coating thickness, improving interfacial adhesion and enhancing separation performance. In this article, we review and identify those appro
APA, Harvard, Vancouver, ISO, and other styles
6

Chung, Tai-Shung. "A Review of Microporous Composite Polymeric Membrane Technology for Air-Separation." Polymers and Polymer Composites 4, no. 4 (1996): 269–83. http://dx.doi.org/10.1177/096739119600400407.

Full text
Abstract:
A detailed review of the fabrication technology of microporous composite polymeric membranes has been conducted. We believe that this type of membrane has greater potential than the traditional asymmetric-composite membranes to be used for the development of the third generation of gas-separation membranes. However, there are four major challenges when preparing a high-performance microporous composite membrane: namely, eliminating pore intrusion, reducing coating thickness, improving interfacial adhesion and enhancing separation performance. In this article, we review and identify those appro
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Cuijing, Daisuke Saeki, and Hideto Matsuyama. "A novel strategy to immobilize enzymes on microporous membranes via dicarboxylic acid halides." RSC Adv. 7, no. 76 (2017): 48199–207. http://dx.doi.org/10.1039/c7ra10012d.

Full text
Abstract:
A simple and efficient enzyme immobilization strategy on microporous membrane surfaces using dicarboxylic acid halides as a spacer offers a tool to design membranes used in enzymatic membrane reactors.
APA, Harvard, Vancouver, ISO, and other styles
8

Verweij, Henk, Y. S. Lin, and Junhang Dong. "Microporous Silica and Zeolite Membranes for Hydrogen Purification." MRS Bulletin 31, no. 10 (2006): 756–64. http://dx.doi.org/10.1557/mrs2006.189.

Full text
Abstract:
AbstractMicroporous amorphous silica and zeolite membranes are made as thin films on a multilayer porous support. The membranes have a network of connected micropores with ∼0.5–nm diameters. Net transport of small molecules on this network occurs under the driving force of a gradient in chemical potential. Favorable combinations of sorption selectivity and diffusion mobility in the membrane materials lead to high H2 fluxes and good selectivity with respect to other gases. The membranes show potential for application in H2 separation under harsh conditions. Amorphous silica membranes show very
APA, Harvard, Vancouver, ISO, and other styles
9

Anggarini, Ufafa, Liang Yu, Hiroki Nagasawa, Masakoto Kanezashi, and Toshinori Tsuru. "Metal-induced microporous aminosilica creates a highly permeable gas-separation membrane." Materials Chemistry Frontiers 5, no. 7 (2021): 3029–42. http://dx.doi.org/10.1039/d1qm00009h.

Full text
Abstract:
Hybrid microporous aminosilica membranes have been successfully synthesized via doping with Ag-, Cu- and Ni-into dense bis[3-(trimethoxysilyl)propyl] amine (BTPA) membranes, which creates micropores via the crosslinking between donor pairs of electrons in the amine moiety and electron acceptors in the empty “d” orbital of a transition metal.
APA, Harvard, Vancouver, ISO, and other styles
10

Guo, Gui Zhen, You Yi Sun, Bin Hua Yang, and Ya Qing Liu. "Controlled Preparation of Microporous Polymer Membrane by Simple Biodegradation Method." Applied Mechanics and Materials 109 (October 2011): 110–13. http://dx.doi.org/10.4028/www.scientific.net/amm.109.110.

Full text
Abstract:
A microporous poly(vinyl alcohol)/Starch composite polymer membrane was successfully synthesized by a biodegradation method. Effects of different poly(vinyl alcohol)/Starch compositions on the porous structures of the porous polymer membranes were further investigated in detail. The characteristic properties of PVA/ Starch composite polymer membranes were systematically studied by scanning electron microscopy (SEM), SL200B angle of contact instrument and Sturm test. The result shows the formation of 1μm-10μm microporous in the blend polymer membrane, which strongly depended on the content of s
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Microporous membrane"

1

Barbe, Aron Mervyn. "The fouling of hydrophobic, microporous membranes used in osmotic distillation." Thesis, Queensland University of Technology, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Borkar, Neha. "Characterization of microporous membrane filters using scattering techniques." University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1289943937.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Browning, Douglas R. "Design of a microcomputer-based microporous membrane process controller." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/51890.

Full text
Abstract:
A microcomputer-based process controller has been developed to produce porous membrane material. The production process is based on stretching the material in a constant temperature solvent bath. This thesis describes the hardware and software designed to direct and monitor the process. A VIC 20 is used as the process-controlling microcomputer. The system features two dedicated motor controllers and two channels for controlling temperature. The motor controllers determine the material feed rate and rate of stretch. The temperature controllers keep the system at a selectable constant temperat
APA, Harvard, Vancouver, ISO, and other styles
4

Albert, Kelsey Morgan. "Microporous Membrane-based Co-culture of Human Embryonic Stem Cells." VCU Scholars Compass, 2007. http://scholarscompass.vcu.edu/etd_retro/161.

Full text
Abstract:
Transwell inserts with microporous membranes, available from multiple commercial sources, have been widely used for various mammalian cell culture applications, including the reduction of cell culture mixing. In this study, we examined the feasibility and functionality of using this technology for separating human embryonic stem cells (hESCs) from their respective feeder cells. We found that when hESCs were propagated on transwell inserts positioned directly above feeder cells grown in a separate dish, the hESCs could be maintained in an undifferentiated state for over 10 passages with no chan
APA, Harvard, Vancouver, ISO, and other styles
5

Jacob, Silvana do Couto. "Studies of a microporous membrane for analyte preconcentration and separation." Thesis, Loughborough University, 1994. https://dspace.lboro.ac.uk/2134/6846.

Full text
Abstract:
A dual phase gas diffusion-FIA system containing a tubular PTFE-membrane was studied as a mean of producing gas samples for routine 15N/14N isotopic ratio mass spectrometry. The method is based on Rittenberg's reaction; the ammonium sample is injected into a liquid alkaline stream containing hypobromite and the N2 gas produced in the reaction diffuses across a PTFE-membrane into a helium carrier stream which carries it to the detector. Initially here, the use of a tubular microporous PTFE-membrane as a device for the preconcentration of samples in aqueous solutions was investigated. The perfor
APA, Harvard, Vancouver, ISO, and other styles
6

Lee, Michael James. "Novel microporous polymers for use as gas separation membranes." Thesis, University of Edinburgh, 2016. http://hdl.handle.net/1842/25786.

Full text
Abstract:
Polymers of Intrinsic Microporosity (PIMs) combine the desirable processability of polymers with a significant degree of microporosity generated from the inefficient packing of their rigid and contorted structures. They are attracting attention for a variety of applications including as membrane materials for gas separations. Over the last 30 years, membranes have become an established technology for separating gases and are likely to play key role in reducing the environmental impact and costs of many industrial processes such as O2 or N2 enrichment from air, natural gas upgrading and hydroge
APA, Harvard, Vancouver, ISO, and other styles
7

Deyhim, Sina. "Deriving Gas Transport Properties of Microporous Silica Membranes from First Principles and Simulating Separation of Multi-Component Systems in Different Flow Configurations." Thesis, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/31340.

Full text
Abstract:
Amorphous silica membranes have molecular sieving properties for the separation of hydrogen from gas mixtures at high temperature. Consequently, they are considered to be applied in separation of a shifted syngas coming out of a water-gas-shift-reactor into the syngas and hydrogen. This separation is a key to an Integrated Gasification Combined Cycle (IGCC) plant, which would allow reducing the carbon footprint in power generation industry. The main objective of this thesis was to carry out a preliminary assessment of suitability of currently available amorphous silica membranes for this separ
APA, Harvard, Vancouver, ISO, and other styles
8

Malpass-Evans, Richard. "Microporous polymers containing tertiary amine functionality for gas separation membrane fabrication." Thesis, Cardiff University, 2014. http://orca.cf.ac.uk/65421/.

Full text
Abstract:
This research reported in this thesis is based on the synthesis of novel polymers of intrinsic microporosity (PIMs) with the aim of fabricating membranes for gas separation applications. PIMs are composed of rigid and awkwardly-shaped monomeric segments which lack the conformational and rotational freedom needed to pack space efficiently. As a result these polymers display high BET surface areas and display excellent gas permeabilities when solution-cast into films which can be used as gas separation membranes. This thesis describes the synthesis of a range of aromatic diamine, tetraamine, dia
APA, Harvard, Vancouver, ISO, and other styles
9

Vieira, Linhares Alexandre Manual. "Molecular simulation of adsorption and diffusion in a microporous carbon membrane." Thesis, University of Edinburgh, 2003. http://hdl.handle.net/1842/14604.

Full text
Abstract:
In this thesis, we have particular interest in the hydrogen recovery from a hydrogen/hydrocarbon refinery waste mixture. Hydrogen is one of the clean, affordable and environmentally friendly energy sources. However, the current industry is not focused on the production or use of hydrogen as an energy carrier or a fuel for energy generation. Membrane separations are an economic alternative to either pressure swing adsorption separations or cryogenic separations. Transport across thin membranes can produce chemical and physical separations at a relatively low price. Thus, the diffusion of fluid
APA, Harvard, Vancouver, ISO, and other styles
10

Cooper, Charlie Austin. "CVD Modification and Vapor/Gas Separation Properties of Alumina Membranes." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1004998070.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Microporous membrane"

1

Zhang, G. S. Rotary microporous membrane filtration studies. UMIST, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

K, Kanellopoulos N., ed. Recent advances in gas separation by microporous ceramic membranes. Elsevier, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Basile, Angelo, and Kamran Ghasemzadeh. Current Trends and Future Developments on Membranes: Microporous Membrane and Membrane Reactors. Elsevier, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Basile, Angelo, and Kamran Ghasemzadeh. Current Trends and Future Developments on Membranes: Microporous Membranes and Membrane Reactors. Elsevier, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Simulation of ethylbenzene dehydrogenation in microporous catalytic membrane reactors. U. S. Dept. of Energy., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jacob, Silvana do Couto. Studies of a microporous membrane for analyte preconcentration and separation. 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hassan, Mohammed H. An experimental and simulation investigation of gas transport in a microporous silica membrane. 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhu, Guangshan, and Xiaoqin Zou. Microporous Materials for Separation Membranes. Wiley & Sons, Incorporated, John, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhu, Guangshan, and Xiaoqin Zou. Microporous Materials for Separation Membranes. Wiley & Sons, Incorporated, John, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhu, Guangshan, and Xiaoqin Zou. Microporous Materials for Separation Membranes. Wiley & Sons, Incorporated, John, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Microporous membrane"

1

Yoshimune, Miki, and Kenji Haraya. "Microporous Carbon Membranes." In Membranes for Membrane Reactors. John Wiley & Sons, Ltd, 2011. http://dx.doi.org/10.1002/9780470977569.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Strathmann, H. "Preparation of Microporous Membranes by Phase Inversion Processes." In Membranes and Membrane Processes. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4899-2019-5_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Caihong, Lei, and Xu Ruijie. "Melt-Stretching Polyolefin Microporous Membrane." In Submicron Porous Materials. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-53035-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Dawei, Jianyun He, Hongyuan Yin, Deyang Gong, and Bo Liu. "Study on the Battery Performance of UHMWPE Microporous Membrane." In Springer Proceedings in Physics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-3530-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hu, Chen-Ze, E. Kurt Dolence, JoDean K-Person, and Shigemasa Osaki. "Preparation of a Plasma Polymerized Tetramethylhydrocyclotetrasiloxane Membrane on Microporous Hollow Fibers." In Surface Modification of Polymeric Biomaterials. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-1953-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Su, W. Winston, Hugo S. Caram, and Arthur E. Humphrey. "Design of Tubular Microporous Membrane Aerated Bioreactors for Plant Cell Cultures." In Biochemical Engineering for 2001. Springer Japan, 1992. http://dx.doi.org/10.1007/978-4-431-68180-9_82.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cho, W. J., J. H. Kim, S. H. Oh, H. H. Nam, J. M. Kim, and Jin Ho Lee. "PCL Electrospun Sheet-Embedded Microporous PLGA Membrane For Effective Guided Bone Regeneration." In 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-68017-8_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yun, Chang H., Asim K. Guha, Ravi Prasad, and Kamalesh K. Sirkar. "Novel Microporous Membrane-Based Separation Processes for Pollution Control and Waste Minimization." In Industrial Environmental Chemistry. Springer US, 1992. http://dx.doi.org/10.1007/978-1-4899-2320-2_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Humphrey, A. E. "Design of Tubular Microporous Membrane Aerated Bioreactors for Plant Cell Suspension Culture." In Advances in Bioprocess Engineering. Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-017-0641-4_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yang, Dawei, Jianyun He, Hongyuan Yin, Deyang Gong, and Bo Liu. "Study on the Preparation Technology of UHMWPE Microporous Membrane for Lithium-Ion Battery." In Springer Proceedings in Physics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-3530-3_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Microporous membrane"

1

Tawade, Pratik V., Hande Aydogmus, Lovro Ivancevic, et al. "Microfluidic Tissue Barrier Sensor Chip with Integrated Microelectrodes and Ultrathin Microporous Membrane." In 2025 IEEE 38th International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2025. https://doi.org/10.1109/mems61431.2025.10918254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jia, Qingrong, Hao Wang, and Guogang Yang. "Pore-scale analysis of structural properties and transfer characteristics of microporous layers in proton exchange membrane fuel cells." In 5th International Conference on Material Science and Technology (ICMST 2025), edited by Sin Yee Gan, Zhongwei Guan, and Paulo César De Morais. SPIE, 2025. https://doi.org/10.1117/12.3067276.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Marconnet, Amy M., Milnes P. David, Anita Rogacs, Roger D. Flynn, and Kenneth E. Goodson. "Temperature-Dependent Permeability of Microporous Membranes for Vapor Venting Heat Exchangers." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67934.

Full text
Abstract:
Improved flow regime stability and lower pressure drop may be possible in two-phase microfluidic heat exchangers through the use of a hydrophobic membrane for phase separation. Past research on vapor-venting heat exchangers showed that membrane mechanical and hydrodynamic properties are crucial for heat exchanger design. However, previous characterizations of hydrophobic membranes were primarily carried out at room temperatures with air or nitrogen, as opposed to liquid water and steam at the elevated operating temperature of the heat exchangers. This work investigates laminated PTFE, unlamina
APA, Harvard, Vancouver, ISO, and other styles
4

Hassan, Mohammed H. M., and J. Douglas Way. "Gas Transport in a Microporous Silica Membrane." In Abu Dhabi International Petroleum Exhibition and Conference. Society of Petroleum Engineers, 1996. http://dx.doi.org/10.2118/36226-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Aglan, H., R. Tshitahe, C. Morris, et al. "Microporous Membrane Nutrient Delivery Systems for Sweetpotato in Microgravity." In International Conference on Environmental Systems. SAE International, 1995. http://dx.doi.org/10.4271/951706.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shrestha, Pranay, Rupak Banerjee, Jongmin Lee, and Aimy Bazylak. "Hydrophilic Microporous Layer Coatings for Polymer Electrolyte Membrane Fuel Cells." In International Conference of Fluid Flow, Heat and Mass Transfer. Avestia Publishing, 2017. http://dx.doi.org/10.11159/ffhmt17.137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ren, Xumei, Hui Gu, Feng Wu, and Xuejie Huang. "Electric Properties of PVDF-HFP Microporous Membrane For Lithium Ion Battery." In Proceedings of the 7th Asian Conference. WORLD SCIENTIFIC, 2000. http://dx.doi.org/10.1142/9789812791979_0064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

de Vega, M., M. Venegas, N. Garcia-Hernando, and U. Ruiz-Rivas. "PERFORMANCE EVALUATION OF H2O-LiBr ABSORBER OPERATING WITH MICROPOROUS MEMBRANE TECHNOLOGY." In First Thermal and Fluids Engineering Summer Conference. Begellhouse, 2016. http://dx.doi.org/10.1615/tfesc1.mnt.012726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cao, Jiangcheng, Tingting Hun, Wenbo Zhou, Zheng Liu, Wei Wang, and Yufeng Jin. "A Method for Automatic Counting and Labeling of Cells Stained with Microporous Membrane." In 2021 IEEE 16th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2021. http://dx.doi.org/10.1109/nems51815.2021.9451488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yuen, Po Ki, and Michael E. DeRosa. "Flexible Microfluidic Devices With Three-Dimensional Interconnected Microporous Walls." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63758.

Full text
Abstract:
Microfluidics is emerging as one of the fastest growing fields for chemical and biological applications. The demand has also increased for methods of fabricating low-cost prototype microfluidic devices rapidly with compatible materials and novel functional attributes. One attractive feature that can be incorporated into microfluidic devices is a porous membrane or porous channel wall [1]. Devices with such features can potentially be used for multiphase catalytic reactions in chemical and pharmaceutical applications similar to the gas-liquid-solid hydrogenation reactions reported by Kobayahi e
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Microporous membrane"

1

Tian, Yongming, Yongqian Gao, and Sivakumar Challa. Layer-by-layer deposition of ultra-thin hybrid/microporous membrane for CO2 separation. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1411444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Brumlik, Charles J., Chrales R. Martin, and Koichi Tokuda. Microhole Array Electrodes Based on Microporous Alumina Membranes. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada247082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dr. Harlan U. Anderson. Microporous and Thin Film Membranes for Solid Oxide Fuel. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/908515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Orlov, Maxim, Ihor Tokarev, Andreas Scholl, Andrew Doran, and Sergiy Minko. pH-Responsive Thin Film Membranes from Poly(2-vinylpyridine): Water Vapor-Induced Formation of a Microporous Structure. Defense Technical Information Center, 2007. http://dx.doi.org/10.21236/ada482321.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Simulation of ethylbenzene dehydrogenation in microporous catalytic membrane reactors. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/10155415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Simulation of ethylbenzene dehydrogenation in microporous catalytic membrane reactors. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5016385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!