Log in

Relevant bibliographies by topics / Microporous surface

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Microporous surface'

Author: Grafiati

Published: 4 June 2021

Last updated: 27 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microporous surface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Microporous surface"

1

Rainey, K. N., G. Li, and S. M. You. "Flow Boiling Heat Transfer From Plain and Microporous Coated Surfaces in Subcooled FC-72." Journal of Heat Transfer 123, no. 5 (2001): 918–25. http://dx.doi.org/10.1115/1.1389465.

Full text

Abstract:

The present research is an experimental study of subcooled flow boiling behavior using flat, microporous-enhanced square heater surfaces in pure FC-72. Two 1-cm2 copper surfaces, one highly polished (plain) and one microporous coated, were flush-mounted into a 12.7 mm square, horizontal flow channel. Testing was performed for fluid velocities ranging from 0.5 to 4 m/s (Reynolds numbers from 18,700 to 174,500) and pure subcooling levels from 4 to 20 K. Results showed both surfaces’ nucleate flow boiling curves collapsed to one line showing insensitivity to fluid velocity and subcooling. The log

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Si Yu, Pei Feng, and Chong Chang Yang. "The Study Based on LABVIEW of the Positioning Accuracy of Spinneret Microporous Fine Machine." Advanced Materials Research 712-715 (June 2013): 1347–50. http://dx.doi.org/10.4028/www.scientific.net/amr.712-715.1347.

Full text

Abstract:

The microporous on spinneret has the characteristics of high precision, small pore size and large quantity. Spinneret microporous finishing operation is mainly used for removing the burr formed on the spinneret silk surface after micropores drilling and punching. The burrs seriously affect the quality of the spinning fibers. Micropore spinneret finishing plays a vital role in improving the quality of processing micropore. This paper introduces a system consisting of the spinneret micropore fine machine,then focuses on fine machine positioning system and proposes a high-precision positioning me

APA, Harvard, Vancouver, ISO, and other styles

3

Dziuba, M., L. Mushinskii, R. Brovko, and V. Doluda. "Surface Characterization of Zn-modified H-ZSM-5 Zeolites." Bulletin of Science and Practice 6, no. 6 (2020): 48–54. http://dx.doi.org/10.33619/2414-2948/55/06.

Full text

Abstract:

The surface properties of microporous aluminosilicates are of primary importance in chemical technology and catalysis. The determination of the surface area, pore volume, and pore size and size distribution for microporous aluminosilicates is a complex scientific and technical problem related to both accurate measurements and the correct choice of a mathematical model that adequately describes the physicochemical processes occurring on the test surface. Currently, t-plot, as-plot, Dubinin-Radushkevich model, Dillimore model and Horvath-Kawazoe model are frequently used, each of which has certa

APA, Harvard, Vancouver, ISO, and other styles

4

Zhou, Bihang, Yinying Hua, Fujun Cheng, Jingui Duan, Lingyun Chen, and Wanqin Jin. "Fabrication of morphology-preserved microporous carbon from a zeolitic-like porous coordination polymer." Inorganic Chemistry Frontiers 4, no. 2 (2017): 234–40. http://dx.doi.org/10.1039/c6qi00526h.

Full text

Abstract:

A new zeolitic-like microporous coordination polymer (PCP), [Zn<sub>2</sub>(L)·2H<sub>2</sub>O]·xguest, was firstly converted to morphology-preserved carbon rods with exclusive micropores and a large surface area for selective gas capture.

APA, Harvard, Vancouver, ISO, and other styles

5

Luo, Yan, Kang Wang, and Ling Fei. "The effects of activation conditions on physical properties of activated carbon." BioResources 15, no. 4 (2020): 7640–47. http://dx.doi.org/10.15376/biores.15.4.7640-7647.

Full text

Abstract:

Porous carbons with a high porosity were successfully produced from fast pyrolysis pine wood char via a thermochemical method in which KOH was used as chemical activator. The effects of various weight ratios of KOH to pyrolysis char (0.65:1, 0.7:1, 1.0:1, 1.35:1, and 1.7:1) on the physical properties of activated carbons were investigated. When the weight ratio of KOH to pyrolysis char was 1.35:1, the prepared activated carbon had the highest surface area of 1140 m2/g with a total pore volume of 0.71 cm3/g, a microporous surface area of 957 m2/g, and a microporous specific volume of 0.51 cm3/g

APA, Harvard, Vancouver, ISO, and other styles

6

Tang, Qingguo, Fei Wang, Mengran Tang, Jinsheng Liang, and Chongyan Ren. "Study on Pore Distribution and Formation Rule of Sepiolite Mineral Nanomaterials." Journal of Nanomaterials 2012 (2012): 1–6. http://dx.doi.org/10.1155/2012/382603.

Full text

Abstract:

Theoretical research and specific surface area analysis of nitrogen adsorption indicated that a lot of structural micropores exist in sepiolite minerals fibers. However, the microporous size, existing form, and the distribution relationship between microporous structures were not proved yet. In this paper, the section TEM samples of nanofibers were prepared on the basis of the metal embedding and cutting technique, and the inner structure of sepiolite nanofibers was observed by TEM. The results showed that sepiolite fibers have multiplayer structure similar to concentric circles, and many micr

APA, Harvard, Vancouver, ISO, and other styles

7

Zhao, Quan-ming, Guang-zhong Li, Hao-ming Zhu, and Li Cheng. "Study on Effects of Titanium Surface Microporous Coatings Containing Zinc on Osteoblast Adhesion and Its Antibacterial Activity." Applied Bionics and Biomechanics 2017 (2017): 1–4. http://dx.doi.org/10.1155/2017/2906575.

Full text

Abstract:

Metal surface structure/biomedical function integration is the current research focus. In previous studies, we have successfully prepared the microporous coatings containing zinc on the pure titanium surface by MAO. In the study, osteoblasts were seeded on the surface of the microporous coatings containing zinc and the adhesion of osteoblasts were evaluated, and the antibacterial activity of the microporous coatings containing zinc is observed through in vitro bacterial experiments. The result indicates that the adhesion ability of osteoblasts on the surface of microporous coatings containing

APA, Harvard, Vancouver, ISO, and other styles

8

Feng, Xiaoke, Hao Yu, Huan Liu, et al. "Three-Dimensionally-Printed Polyether-Ether-Ketone Implant with a Cross-Linked Structure and Acid-Etched Microporous Surface Promotes Integration with Soft Tissue." International Journal of Molecular Sciences 20, no. 15 (2019): 3811. http://dx.doi.org/10.3390/ijms20153811.

Full text

Abstract:

Polyether-ether-ketone (peek) is one of the most common materials used for load-bearing orthopedic devices owing to its radiolucency and favorable mechanical properties. However, current smooth-surfaced peek implants can lead to fibrous capsule formation. To overcome this issue, here, peek specimens with well-defined internal cross-linked structures (macropore diameters of 1.0–2.0 mm) were fabricated using a three-dimensional (3D) printer, and an acid-etched microporous surface was achieved using injection-molding technology. The cell adhesion properties of smooth and microporous peek specimen

APA, Harvard, Vancouver, ISO, and other styles

9

Kim, J. H., K. N. Rainey, S. M. You, and J. Y. Pak. "Mechanism of Nucleate Boiling Heat Transfer Enhancement From Microporous Surfaces in Saturated FC-72." Journal of Heat Transfer 124, no. 3 (2002): 500–506. http://dx.doi.org/10.1115/1.1469548.

Full text

Abstract:

The present study is an experimental investigation of the nucleate pool boiling heat transfer enhancement mechanism of microporous surfaces immersed in saturated FC-72. Measurements of bubble size, frequency, and vapor flow rate from a plain and microporous coated 390 μm diameter platinum wire using the consecutive-photo method were taken to determine the effects of the coating on the convective and latent heat transfer mechanisms. Results of the study showed that the microporous coating augments nucleate boiling performance through increased latent heat transfer in the low heat flux region an

APA, Harvard, Vancouver, ISO, and other styles

10

Ji, Yan Yan, Biao Zhang, and Xiao Chun Wang. "Adsorption Properties of Self-Assembly Synthesized Microporous Silica Material from Acidic Aqueous Media." Advanced Materials Research 179-180 (January 2011): 519–22. http://dx.doi.org/10.4028/www.scientific.net/amr.179-180.519.

Full text

Abstract:

Microporous silica material AMPS has been synthesized via TEA+ cations assisted self-assembly of silica species in acidic aqueous solution. Nitrogen adsorption analysis revealed 0.65 nm uniform micropores in AMPS, companied with a Langmuir surface area of 745 m2/g and a pore volume of 0.22 cm3/g. The microporous AMPS exhibited an excellent adsorptive performance for volatile organic compounds (VOC) such as cyclohexane and acetone, compared with conventional zeolites such as Y, ZSM-5 and A. The adsorption was rapidly saturated at lower relative pressure with higher capacities than that of conve

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Microporous surface"

1

Ding, Li Ping. "Multicomponent adsorption in heterogeneous microporous solids /." [St. Lucia, Qld.], 2002. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe16729.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bräuer, Pierre. "A multi-technique approach to characterise acidic surface properties of microporous catalysts." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/278651.

Full text

Abstract:

Microporous catalysts belong to a class of materials that exhibit pore networks in the molecular dimension, that is, channel diameters less than 2 nm. The industrially most important microporous catalysts are zeolites, which are crystalline aluminosilicates and consist of interlinked alumina (AlO4) and silica (SiO4) tetrahedra forming pores and cavities of molecular dimensions. Zeolites can act as very strong solid acids and function as heterogeneous catalysts in various industrial processes used to obtain polyethylene terephthalate (PET) or polyvinyl chloride (PVC). They are crucial for produ

APA, Harvard, Vancouver, ISO, and other styles

3

Jan, Der-E. 1961. "Electrokinetic and surface charge characteristics of microporous membranes used in aqueous filtration." Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/278066.

Full text

Abstract:

The electrical characteristics of nylon 66, charge-modified nylon 66 and PVDF filter membranes were investigated using the electrophoretic and streaming potential techniques. Characterization of surface charge density of nylon based membranes were performed by acid/base titration. The adsorption of an anionic dye was used to determine the charge density of positive sites on the N66 Posidyne membrane. The results show that the isoelectric point (IEP) of N66 Posidyne and Zetapor (E-grade) occurred at pH 7.6 and 6.2, respectively. The point of zero charge (PZC) of E-grade Zetapor occurred at a mu

APA, Harvard, Vancouver, ISO, and other styles

4

Koda, Ryo. "Electrochemical deposition of metal on microporous silicon electrodes influenced by hydration structures of solutes and electrode surfaces." 京都大学 (Kyoto University), 2015. http://hdl.handle.net/2433/199323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Larabi, Cherif. "Surface organometallic chemistry on Metal Organic Frameworks (MOF) : synthesis, characterization and their application in catalysis." Thesis, Lyon 1, 2011. http://www.theses.fr/2011LYO10008/document.

Full text

Abstract:

Les structures organométalliques poreuses (Metal Organic Framework, MOF) sont une nouvelle classe de matériaux, composées d'ions métalliques ou de clusters liés à des ligands organiques ou des complexes organométalliques dans des réseaux cristallins 1D, 2D ou 3D. Au cours de cette thèse la possibilité de construire de nouveaux MOF a été illustrée par le développement de matériaux MOF à base d’imidazolium, précurseur important pour la synthèse de catalyseurs. En outre, ce travail démontre l’utilité de la modification post-synthèse des MOFs par chimie organométallique de surface à visée catalyti

APA, Harvard, Vancouver, ISO, and other styles

6

Xu, Juanbao. "Fabrication of Osmotic Distillation Membranes for Feeds Containing Surface-Active Agents." Thesis, Queensland University of Technology, 2005. https://eprints.qut.edu.au/16049/1/Juanbao_Xu_Thesis.pdf.

Full text

Abstract:

The present work was undertaken to develop a composite osmotic distillation (OD) membrane consisting of a thin hydrogel coating on a microporous hydrophobic substrate for the concentration of aqueous feeds containing surface-active agents. The range of OD applications using the hydrophobic membrane alone have been severely limited by the propensity for membrane wet-out when contacted by amphiphilic agents such as oils, fats and detergents. Wet-out allows the feed solution to track freely through the membrane pores with a resulting loss of solutes and a decrease in selectivity. The rationale fo

APA, Harvard, Vancouver, ISO, and other styles

7

Padki, Santosh Shankar. "Influence of surface tension and concentration of a non-ionic surfactant on the barrier effectiveness of a microporous polypropylene fabric for pesticide protective clothing." Thesis, This resource online, 1997. http://scholar.lib.vt.edu/theses/available/etd-08222008-063707/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Xu, Juanbao. "Fabrication of Osmotic Distillation Membranes for Feeds Containing Surface-Active Agents." Queensland University of Technology, 2005. http://eprints.qut.edu.au/16049/.

Full text

Abstract:

The present work was undertaken to develop a composite osmotic distillation (OD) membrane consisting of a thin hydrogel coating on a microporous hydrophobic substrate for the concentration of aqueous feeds containing surface-active agents. The range of OD applications using the hydrophobic membrane alone have been severely limited by the propensity for membrane wet-out when contacted by amphiphilic agents such as oils, fats and detergents. Wet-out allows the feed solution to track freely through the membrane pores with a resulting loss of solutes and a decrease in selectivity. The rationale fo

APA, Harvard, Vancouver, ISO, and other styles

9

Ludwick, Jonathan. "Physics of High-Power Vacuum Electronic Systems Based on Carbon Nanotube Fiber Field Emitters." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613745398331048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Yata, Vishnu Vardhan Reddy. "Investigation of Spray Cooling Schemes for Dynamic Thermal Management." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984153/.

Full text

Abstract:

This study aims to investigate variable flow and intermittent flow spray cooling characteristics for efficiency improvement in active two-phase thermal management systems. Variable flow spray cooling scheme requires control of pump input voltage (or speed), while intermittent flow spray cooling scheme requires control of solenoid valve duty cycle and frequency. Several testing scenarios representing dynamic heat load conditions are implemented to characterize the overall performance of variable flow and intermittent flow spray cooling cases in comparison with the reference, steady flow spray c

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Microporous surface"

1

D.C.) International Heat Transfer Conference (14th 2010 Washington. Enhancement of heat transfer with pool and spray impingement boiling on microporous and nanowire surface coatings. National Renewable Energy Laboratory, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Derouane, Eric G. Zeolite Microporous Solids: Synthesis, Structure, and Reactivity. Springer Netherlands, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Johnson, Keith A. Transport of micelle-solubilized compounds through microporous membranes. 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Progress in Zeolite and Microporous Materials (Studies in Surface Science and Catalysis). Elsevier, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hattori, Tadashi. Zeolites and Microporous Crystals: Proceedings of the International Symposium on Zeolites and Microporous Crystals, Nagoya, August 22-25, 1993 (Studies in Surface Science and Catalysis). Elsevier Science Ltd, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Microporous surface"

1

Nagai, Atsushi. "Surface Area and the Theory of Porous Materials." In Conjugated Microporous Polymers. Jenny Stanford Publishing, 2025. https://doi.org/10.1201/9781003636526-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hutchings, Graham J. "Enantioselective Reactions Using Modified Microporous and Mesoporous Materials." In Surface Chemistry and Catalysis. Springer US, 2002. http://dx.doi.org/10.1007/978-1-4757-6637-0_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Trewin, Abbie. "Analyzing the Surface Area Properties of Microporous Materials." In Molecules at Work. Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527645787.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Occelli, M. L., K. Takahama, M. Yokoyama, and S. Hirao. "Surface and Cracking Properties of Expanded Clays Dried with a Supercritical Fluid." In Expanded Clays and Other Microporous Solids. Springer US, 1992. http://dx.doi.org/10.1007/978-1-4684-8866-1_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hu, Chen-Ze, E. Kurt Dolence, JoDean K-Person, and Shigemasa Osaki. "Preparation of a Plasma Polymerized Tetramethylhydrocyclotetrasiloxane Membrane on Microporous Hollow Fibers." In Surface Modification of Polymeric Biomaterials. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-1953-3_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rieser, T., K. Lunkwitz, S. Berwald, et al. "Surface Modification of Microporous Polypropylene Membranes by Polyelectrolyte Multilayers." In ACS Symposium Series. American Chemical Society, 1999. http://dx.doi.org/10.1021/bk-2000-0744.ch013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Marchese, Leonardo, Gloria Berlier, and Salvatore Coluccia. "Chapter 36. Solid Acid Microporous H-SAPO-34: From Early Studies to Perspectives." In Turning Points in Solid-State, Materials and Surface Science. Royal Society of Chemistry, 2007. http://dx.doi.org/10.1039/9781847558183-00604.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Anpo, Masakazu, and Masaya Matsuoka. "Chapter 28. Recent Advances in Single-Site Photocatalysts Constructed within Microporous and Mesoporous Materials." In Turning Points in Solid-State, Materials and Surface Science. Royal Society of Chemistry, 2007. http://dx.doi.org/10.1039/9781847558183-00492.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Okoshi, Takafumi, Giorgio Soldani, Moses Goddard, and Pierre M. Galletti. "Microporous Polyurethane Inhibits Critical Mural Thrombosis and Enhances Endothelialization at Blood-Contacting Surface." In Heart Replacement. Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-67020-9_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

"Microporous and Mesoporous Catalysts." In Surface and Nanomolecular Catalysis. CRC Press, 2006. http://dx.doi.org/10.1201/9781420015751-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Microporous surface"

1

Nargiello, Maria, Hrishikesh Bhide, Niko Haberkorn, Markus Hallack, Bjoern Lazar, and Laura Kleeman. "New Thermal Management Raw Materials Platform Gives Flexibility to Develop Next Generation Thermal Insulation Coatings (TIC) with Improved Performance." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20913.

Full text

Abstract:

Abstract Coating industry trends has driven increased use and interest to develop more efficient and durable thermal insulative coatings. The key areas for this expansion are to reduce corrosion under insulation, increase occupational safety and reduce energy loss. Key features of these water-based coatings are low thermal conductivity, high hydrophobicity and adhesion along with an emerging interest to have greater heat resistance and stability. This paper will introduce a new water-based silicone hybrid resin to accompany the two novel microporous composite granules; one with high thermal in

APA, Harvard, Vancouver, ISO, and other styles

2

Mirdzveli, Nato, Vladimer Tsitsishvili, Nanuli Dolaberidze, Manana Nijaradze, and Bela Khutsishvili. "EFFECTS OF CHEMICAL AND THERMAL TREATMENT OF FINE DISPERSED GEORGIAN HEULANDITE-CLINOPTILOLITE." In 24th SGEM International Multidisciplinary Scientific GeoConference 2024. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024v/4.2/s17.14.

Full text

Abstract:

The article considers the processes leading to a change in the structure and properties as a result of calcination followed by acid treatment of heulandite-containing tuff from the Georgian Dzegvi-Tedzami deposit. The samples obtained by heat-acid treatment were studied by the X-ray energy dispersion spectra and diffraction patterns, as well as by adsorption of water and benzene methods. It was found that pre-heat treatment reduces weight loss and the degree of dealumination during subsequent acid treatment, and also affects the decationization process: with increasing preheating temperature,

APA, Harvard, Vancouver, ISO, and other styles

3

Yang, J., M. B. Dizon, F. B. Cheung, J. L. Rempe, K. Y. Suh, and S. B. Kim. "Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface." In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56056.

Full text

Abstract:

An experimental study was performed to investigate the effect of surface coating on the critical heat flux for downward facing boiling on the outer surface of a hemispherical vessel. Steady-state boiling experiments were conducted in the SBLB (subscale boundary layer boiling) facility using test vessels with metallic microporous coatings to obtain the local boiling curves and the local CHF limits. Similar heat transfer performance was observed for microporous aluminum and microporous copper coatings. When compared to the corresponding data without coatings, the boiling curves for the coated ve

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Li, and Moran Wang. "Surface Charge Effects on Reactive Transports in Microporous Media." In The 15th International Heat Transfer Conference. Begellhouse, 2014. http://dx.doi.org/10.1615/ihtc15.pmd.009837.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Huang, Yonggang, Yang Zhang, Hui Liu, and Zhenan Gu. "XPS study on microporous surface composition of microchannel plates." In International Symposium on Photoelectronic Detection and Imaging 2011. SPIE, 2011. http://dx.doi.org/10.1117/12.900283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jeon, Saeil, Byeongnam Jo, and Debjyoti Banerjee. "Enhancement of Saturation Boiling of PF-5060 on Microporous Surface." In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44408.

Full text

Abstract:

Pool boiling experiments were conducted to investigate the saturation boiling of PF-5060 dielectric liquid on micro porous copper surface. The micro porous surface is deposited on a copper coated silicon wafer diced to a size of 40 mm × 68 mm. Reference experiments were performed using a bare silicon wafer of the same size. Experiments are also performed using deionized water that was degassed prior to the experiment. The experimental results show that there is ∼48% enhancement of heat flux in nucleate boiling regime on the micro porous copper surface, compared to that on a bare surface for po

APA, Harvard, Vancouver, ISO, and other styles

7

Liao, Chao-Yaug, Po-Lun Wu, and Chao-Yu Lee. "Customized PEEK Implants With Microporous and Surface Modification Using 3D Printing." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97117.

Full text

Abstract:

Abstract Polyetheretherketone (PEEK) is a high-performance, semi-crystalline thermal polymer with medical advantages such as biocompatibility and radiolucency. PEEK has an elastic modulus comparable to that of human cortical bone, so it can effectively reduce the stress shielding effect caused by the mismatch between the mechanical properties of an implant and human bone tissue. However, PEEK is biologically inert, and its use typically relies on a variety of surface modification methods, such as surface coatings of bio-ceramic materials, enhancing the surface bioactivity, and osseointegration

APA, Harvard, Vancouver, ISO, and other styles

8

Thiagarajan, Suraj Joottu, Sreekant Narumanchi, Charles King, Wei Wang, and Ronggui Yang. "Enhancement of Heat Transfer With Pool and Spray Impingement Boiling on Microporous and Nanowire Surface Coatings." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-23284.

Full text

Abstract:

The National Renewable Energy Laboratory (NREL) is leading a national effort to develop next-generation cooling technologies for hybrid vehicle electronics, as part of the Advanced Power Electronics and Electrical Machines program area in the U.S. Department of Energy’s (DOE’s) Vehicle Technologies Program. The overarching goal is to reduce the size, weight, and cost of power electronic modules that convert direct current from the batteries to alternating current for the motor, and vice versa. Aggressive thermal management techniques help in achieving the goals of increased power density and r

APA, Harvard, Vancouver, ISO, and other styles

9

Segall, Albert, Timothy Eden, and Bill Cheung. "Surface engineering from preparation to unique microporous coatings via cold-spray and the implications for mitigating nuclear reactor accidents (Conference Presentation)." In Surface Engineering and Forensics, edited by Akhlesh Lakhtakia and Satish T. Bukkapatnam. SPIE, 2023. http://dx.doi.org/10.1117/12.2658884.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Yang, Chien-Yuh, and Chien-Fu Liu. "Visualization of Boiling Heat Transfer on Micro Porous Coated Surface in Confined Space." In ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icnmm2013-73175.

Full text

Abstract:

Numerous researches have been developed for pool boiling on microporous coated surface in the past decade. The nucleate boiling heat transfer was found to be increased by up to 4.5 times than that on uncoated surface. Recently, the two-phase micro heat exchangers have been considered for high flux electronic devices cooling. The enhancement techniques for improving the nucleate boiling heat transfer performance in the micro heat exchangers have gotten more importance. Previous studies of microporous coatings, however, have been restricted to boiling in unconfined space. No studies have been ma

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Microporous surface"

1

Thiagarajan, S. J., W. Wang, R. Yang, S. Narumanchi, and C. King. Enhancement of Heat Transfer with Pool and Spray Impingement Boiling on Microporous and Nanowire Surface Coatings. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/990105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!