Log in

Relevant bibliographies by topics / Microreactors – Design and construction / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Microreactors – Design and construction.

Dissertations / Theses on the topic 'Microreactors – Design and construction'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Microreactors – Design and construction.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Tonomura, Osamu. "Shape Design and Operation of Microreactors." 京都大学 (Kyoto University), 2015. http://hdl.handle.net/2433/200473.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Völkel, Norbert. "Design and characterization of gas-liquid microreactors." Thesis, Toulouse, INPT, 2009. http://www.theses.fr/2009INPT020G/document.

Full text

Abstract:

Cette étude est dédiée à l'amélioration du design des microréacteurs gaz-liquide. Le terme de microréacteur correspond à des appareils composés de canaux dont les dimensions sont de l’ordre de quelques dizaines à quelques centaines de microns. Grâce à la valeur importante du ratio surface/volume, ces appareils constituent une issue prometteuse pour contrôler les réactions rapides fortement exothermiques, souvent rencontrées en chimie fine et pharmaceutique. Dans le cas des systèmes gaz-liquide, on peut citer par exemple les réactions de fluoration, d’hydrogénation ou d’oxydation. Comparés à de

APA, Harvard, Vancouver, ISO, and other styles

3

Asano, Shusaku. "Rational Design of Micromixers and Reaction Control in Microreactors." Kyoto University, 2018. http://hdl.handle.net/2433/232008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hari, Bost Jan. "Multi-Scale Modelling, Simulation, Design and Analysis of Microreactors." Thesis, University of Manchester, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.511850.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Phillips, Cynthia Michelle. "Model-based design optimization of heterogeneous micro-reactors and chemical sensors." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/18390.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Westerhoff, Kevin M. (Kevin Matthew) 1978. "Construction based design." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84827.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Xie, Xiaoling. "Communications in construction design." Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/7571.

Full text

Abstract:

Construction design has become an increasingly complex synthesis activity for which effective solutions depend upon co-operative participation by a number of people. Thus communication, including the integration of specialised knowledge and negotiation of differences between team members, is a vital process for collaborative design. A questionnaire survey was initially conducted to investigate communication issues and problems, which had been highlighted from a review of the literature, in current construction design. The results confirmed that communication among the different construction te

APA, Harvard, Vancouver, ISO, and other styles

8

Soto, Leticia S. M. Massachusetts Institute of Technology. "Construction design as a process for flow : applying lean principles to construction design." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42995.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, System Design and Management Program, 2007.<br>Includes bibliographical references (p. 108-111).<br>Delays and cost overruns are the rule rather than the exception in the construction industry. Design changes due to lack of constructability late in the construction phase generating costly ripple effect which create delay and disruption throughout the entire organization, are the largest contributors to the stated rule. In the building construction industry, of increased competitiveness, demand from many companies continued effort to develop

APA, Harvard, Vancouver, ISO, and other styles

9

Chew, En Phin. "Superconducting Transformer Design and Construction." Thesis, University of Canterbury. Electrical and Computer Engineering, 2010. http://hdl.handle.net/10092/4977.

Full text

Abstract:

This thesis first outlines the testing undertaken on a partial core superconducting transformer under open circuit, short circuit, full load and endurance test conditions. During the endurance test, a failure occurred after 1 minute and 35 seconds. During the failure, voltage dipping and rapid liquid nitrogen boil off was observed. This prompted a failure investigation which concluded that the lack of cooling in the windings was the most probable cause to the failure. Full core transformer and superconductor theories are then introduced. A copper winding transformer model, based on a Steinmetz

APA, Harvard, Vancouver, ISO, and other styles

10

Sebille, Michel. "Design :construction, automorphisms and colourings." Doctoral thesis, Universite Libre de Bruxelles, 2002. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/211428.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Leung, Chi-ming. "Design consultancy vs design and build consultancy : present trends in the construction industry /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038869.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Ajayi, Saheed O. "Design, procurement and construction strategies for minimizing waste in construction projects." Thesis, University of the West of England, Bristol, 2017. http://eprints.uwe.ac.uk/30123/.

Full text

Abstract:

The construction industry contributes the largest portion of waste to landfill, and it consumes a significant proportion of mineral resources excavated from nature. Due to adverse environmental impacts of waste generation, as well as financial gains associated with its minimization, waste intensiveness of the industry has remained a major concern across nations. This study investigates the design, procurement and construction strategies for waste minimization, using a dynamic approach. Apart from an investigation of the key and underlying measures for construction waste mitigation, the study c

APA, Harvard, Vancouver, ISO, and other styles

13

Ferguson, A. J. L. "Dilution refrigerator : Design, construction and performance." Thesis, University of Ulster, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378638.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Jeffries, James R. "Construction implications of photolithography equipment design /." May be available electronically:, 2007. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Batzer, Rachel E. (Rachel Elizabeth). "Design and construction of a dynamometer." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68827.

Full text

Abstract:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.<br>"June 2011." Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 20).<br>Access to a dynamometer is a useful tool for any electrical system where the motors must be selected from various suppliers and fully characterized. Motor suppliers usually provide a torque, speed, efficiency curve, but it frequently lacks complete motor characterization and includes motor controller losses in the total system loss. The dynamometer presented in this thesis is primarily designed for

APA, Harvard, Vancouver, ISO, and other styles

16

Bibby, Lee. "Improving design management techniques in construction." Thesis, Loughborough University, 2003. https://dspace.lboro.ac.uk/2134/793.

Full text

Abstract:

Recent years has seen a significant drive away from traditional procurement routes with contractors finding themselves with an increasing responsibility for control of design - a process they have had little experience in managing. They now have to adapt accordingly. The learning curve is steep, not least because many projects must now be delivered fast track while co-ordinating increasingly complex fabric and content of buildings without a platform of accepted good practice to manage the design process. This is a major factor preventing the UK construction industry from delivering projects on

APA, Harvard, Vancouver, ISO, and other styles

17

Petras, James P. "Prefabrication and the Construction Industry: An Examination of Design, Construction, and Efficiency." University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1277120331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Rehnberg, Adam. "Suspension design for off-road construction machines." Doctoral thesis, KTH, Fordonsdynamik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-33883.

Full text

Abstract:

Construction machines, also referred to as engineering vehicles or earth movers, are used in a variety of tasks related to infrastructure development and material handling. While modern construction machines represent a high level of sophistication in several areas, their suspension systems are generally rudimentary or even nonexistent. This leads to unacceptably high vibration levels for the operator, particularly when considering front loaders and dump trucks, which regularly traverse longer distances at reasonably high velocities. To meet future demands on operator comfort and high speed ca

APA, Harvard, Vancouver, ISO, and other styles

19

Brouqueyre, Laurent. "Hydro-acoustic therapy : design, construction and testing." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18215.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Roth, Fabian. "Explicit design, and adaptation in self-construction /." Zürich : ETH, 2007. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=17005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Bogdanov, Anton. "Design and construction of widebeam riometer system." Thesis, Lancaster University, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.588505.

Full text

Abstract:

Ionospheric absorption is a controlling factor in accurate prediction of medium to high frequency signal levels that are passing through ionosphere. Particularly at high latitudes ionospheric storms are the main problem, causing unreliable communication. Sometimes these storms can lead HF radio signals to "polar blackouts" (reducing the signal in-time by 20 % or more) or they can even be completely absorbed by ionosphere. [Ware and Owren, 1958] This project report presents the design, construction and testing of a device that is used to measure ionospheric cosmic noise absorption, which is cal

APA, Harvard, Vancouver, ISO, and other styles

22

Yung, Keung-Shing, and 翁強盛. "Piling design and construction in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B4257609X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Yung, Keung-Shing. "Piling design and construction in Hong Kong." Click to view the E-thesis via HKUTO, 2001. http://sunzi.lib.hku.hk/hkuto/record/B4257609X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Robinson, Adrian C. "ISBU modular construction and building design prototypes." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/27480.

Full text

Abstract:

With the use of industrialised construction increasing, Buro Happold (BH) commissioned this research as part of on-going initiatives to address the lack of efficiency in design and construction. The research considers two major case studies where modularisation has been used to minimise complexity and increase standardisation. Referred to in this thesis as construction product prototypes and building design prototypes , the two studies examine firstly the product development of an Intermodal Steel Building Unit (ISBU) used in multi-storey construction and secondly a modular station pre-design

APA, Harvard, Vancouver, ISO, and other styles

25

Dias, Jay D. "Design, Construction, and Optimization of Microprobe Beamlines." Thesis, University of Louisiana at Lafayette, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10812789.

Full text

Abstract:

<p>A new external microprobe beamline for irradiation experiments has been commissioned and constructed at the Louisiana Accelerator Center. This microprobe was designed to use the Oxford Triplet lens con?guration with no scanning system. The beamline was designed to allow for the post focus expansion of the ion beam to create an even ?led of current distribution at a sample. The samples are irradiated in air in a glove box so that a Biosaftey-Level 2 (BSL-2) environment is created, reducing risk of contamination for biological sample irradiation. The nature of a microprobe allows the ?ux, and

APA, Harvard, Vancouver, ISO, and other styles

26

Wu, Berlin. "Geotechnical design and construction automation in Taiwan." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/41353.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Jackowski, Zachary John. "Design and construction of an autonomous ornithopter." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/52809.

Full text

Abstract:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2009.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Page no. "2" in pagination repeated twice. Cataloged from student submitted PDF version of thesis.<br>Includes bibliographical references (p. 56-57 [i.e. 57-58]).<br>In recent years the subject of flying vehicles propelled by flapping wings, also known as ornithopters, has been an area of interest because of its application to micro aerial vehicles (MA

APA, Harvard, Vancouver, ISO, and other styles

28

Fang, Rosemarie. "The design and construction of fabric structures." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/51577.

Full text

Abstract:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2009.<br>Includes bibliographical references (leaves 46-47).<br>In its short history, fabric structures have fascinated architects and engineers alike. Architects appreciate their unusual shapes and forms while engineers delight in their "pure" structural expression. Capable of spanning large distances while incurring very little weight on supporting structure, developments in the design of fabric structure can dramatically change the ways in which permanent building construction is conceptua

APA, Harvard, Vancouver, ISO, and other styles

29

Hopper, Amanda Jane. "Landfill design, construction and non-invasive monitoring." Thesis, University of Plymouth, 1998. http://hdl.handle.net/10026.1/1989.

Full text

Abstract:

Three techniques are investigated in order to assess their applicability for use in landfill design, construction and monitoring. Firstly, an assessment is made of QA procedures during liner construction through the detailed evaluation of two case studies. Construction QA procedures on-site are compared to available guidelines. The research illustrates the requirement for standardised, regulated QA procedures on landfill sites in order to provide a recognised framework for construction control. The Moisture Condition Value Test (MCV) is evaluated for use as a method of monitoring the placement

APA, Harvard, Vancouver, ISO, and other styles

30

Bostanci, Sevket Can. "Low carbon sustainable concrete design and construction." Thesis, Kingston University, 2015. http://eprints.kingston.ac.uk/34545/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Hansson, Johan, and Christian Bothén. "Design and construction of electronic control unit." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-353124.

Full text

Abstract:

The main objective of this project was to create a new, future-proofed, electroniccontrol unit for a test station at GE Healthcare in Uppsala. The control unit was tobe created in cooperation with the technical consultant firm Rejlers. The project consisted of two parts, one investigation part and one design part. The investigation part consisted of examining the previous control unit and its connection between the quality control station and the host computer. This examination resulted in a specification of requirements which was used as a basis in the design of the new control unit. The des

APA, Harvard, Vancouver, ISO, and other styles

32

Ahlbäck, Moa. "Integrerade arbetsmetoder med Virtual Design and Construction." Thesis, KTH, Fastigheter och byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231601.

Full text

Abstract:

Virtual Design and Construction (VDC) introducerades tidigt på 2000-talet för att främja ett arbete med datorbaserade modeller samt involvering av produktionsplanering i designfasen. VDC är ett koncept som idag har anammats inom många bygg- och konsultföretag för att utveckla arbetet med Building Information Model (BIM), innovationer och samverkan inom byggprojekt. Konceptet VDC förändras ständigt och omdefinieras av enskilda individer och företag. Det här resulterar i att det råder en begreppsförvirring hur VDC ska definieras och hur arbete med VDC ska genomföras. Vidare tenderar många byggpr

APA, Harvard, Vancouver, ISO, and other styles

33

Ghalandar, Zehi Jalalabad Toomaj. "Design Quality in Architecture and Construction Research." Thesis, KTH, Fastigheter och byggande, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-254838.

Full text

Abstract:

The issue of design quality in construction projects has long been a major concern for designprofessionals (Gann et al. 2003). The emphasis on improvement of processes in constructionin order to manage or reduce “cost, time and waste” in projects, at times has led to concernsthat the design of a building could become a matter of less importance due to such processimproving measures (Gann et al. 2003, p.319) “Design Quality” in architecture andconstruction is an ambiguous and “dynamic concept” in relation to its context, continuouslygoing through changes (Rönn 2010, p.48; Slaughter 2004).Qualit

APA, Harvard, Vancouver, ISO, and other styles

34

Jones, Andrew M. "Design and construction for traditional house building." Thesis, Aston University, 1990. http://publications.aston.ac.uk/14272/.

Full text

Abstract:

This study is concerned with quality and productivity aspects of traditional house building. The research focuses on these issues by concentrating on the services and finishing stages of the building process. These are work stages which have not been fully investigated in previous productivity related studies. The primary objective of the research is to promote an integrated design and construction led approach to traditional house building based on an original concept of 'development cycles'. This process involves the following: site monitoring; the analysis of work operations; implementing d

APA, Harvard, Vancouver, ISO, and other styles

35

Lenski, Philipp. "Design, Construction and Operation of a Pentacopter." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-64370.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Law, Gordon Ki-Wai. "Decision support system for construction cycle design." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26715.

Full text

Abstract:

The objective of this thesis is to develop a conceptual design of a computerized environment for detailed design of construction activities associated with projects characterized by significant repetition. High-rise building construction is used as the example of repetitive construction projects. The construction cycle design of a typical floor structure is studied to gain an understanding of the difficulty and complexity involved in the activity design process. Modeling techniques currently used in construction planning, modeling techniques developed in the field of operations research, and

APA, Harvard, Vancouver, ISO, and other styles

37

Morris, Jonathan. "Improving construction design : the lean thinking paradigm." Thesis, Cranfield University, 1999. http://dspace.lib.cranfield.ac.uk/handle/1826/3840.

Full text

Abstract:

A study has been conducted into improving construction design through the application of the lean thinking paradigm. Its objective was to identify the issues relating to design efficiency and how a lean thinking approach might address these issues. The investigation consisted of examining work already undertaken in the field by other researchers"to identify the state of the art. The change order request system was examined to gain first insights into waste in construction design, and to gauge the size of the opportunity for the application of lean thinking. An Electronic Data Gathering To

APA, Harvard, Vancouver, ISO, and other styles

38

Bacher, Denise. "Design patterns in level design common practices in simulated environment construction /." [Ames, Iowa : Iowa State University], 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

39

Fox, Stephen John. "Application of design for manufacture principles to building design and construction." Thesis, Sheffield Hallam University, 2001. http://shura.shu.ac.uk/19207/.

Full text

Abstract:

The aim of this thesis is to answer the two research questions: how can design for manufacture be applied during building component design and building design?; and how can the application of design for manufacture be successful in improving the productivity and quality of building component production and building construction? These two questions emerged during exploratory research focused on the use of design to improve construction industry productivity and quality. Subsequent review of manufacturing literature revealed that the two key principles of design for manufacture are standard pro

APA, Harvard, Vancouver, ISO, and other styles

40

Baldev, Darshan H. "Design of a Construction Safety Training System using Contextual Design Methodology." Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/35200.

Full text

Abstract:

In the U.S., the majority of construction companies are small companies with 10 or fewer employees (BLS, 2004). The fatality rate in the construction industry is high, indicating a need for implementing safety training to a greater extent. This research addresses two main goals: to make recommendations and design a safety training system for small construction companies, and to use Contextual Design to design the training system. Contextual Design was developed by Holtzblatt (Beyer and Holtzblatt, 1998) in an effort to address the challenge of designing new systems. Ethnographic in nature, the

APA, Harvard, Vancouver, ISO, and other styles

41

Beg, Zeshawn Afsari. "Complexity, Contract Design and Incentive Design in the Construction Management Industry." Thesis, Harvard University, 2015. http://nrs.harvard.edu/urn-3:HUL.InstRepos:16881896.

Full text

Abstract:

In this paper I examine how one construction management company uses contract design and incentive design to respond to aspects of task complexity and relationship complexity present in its construction projects. In terms of contract design, I find that the company is unable to increase its use of cost-plus pricing when faced with technically complex projects. Instead, the company uses increased pre-execution design modification and price markups when technically complex projects are contracted with fixed-pricing. Further, I find that design modification is only margin-improving when used in p

APA, Harvard, Vancouver, ISO, and other styles

42

Kristjánsdóttir, Rut. "Design of Heavy DutyPavements." Thesis, KTH, Byggnadsmaterial, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-218502.

Full text

Abstract:

This research is focused on design of Heavy Duty Pavement which is when a pavement loading exceeds highway levels. The environment where these conditions occur are for example at ports, industrial areas and airport because of the use of heavy vehicles as handling of containers by Straddle Carriers, Front Lift Trucks or Reach Stackers, airplanes and more. The main emphasis here will be on heavy duty pavements for ports. Different design methods are discussed and compared for the pavement design of ports. In this research two different design methods are thoroughly analyzed, the British Ports As

APA, Harvard, Vancouver, ISO, and other styles

43

梁志明 and Chi-ming Leung. "Design consultancy vs design and build consultancy: present trends in the construction industry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31266678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Carlsson, Linnea. "Visual Planning in construction : a study of its use in construction projects." Thesis, KTH, Fastigheter och byggande, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-96390.

Full text

Abstract:

Abstract The purpose of this master thesis is to investigate of what use the method Visual Planning can be in the construction industry in general and in the design phase of construction projects in particular. The investigation and empirical part of the thesis has been based on semi-structured interviews with process developers, design managers and designers from Swedish companies where Visual Planning is used. The interviews have been the base for a comparative case study with the aim of providing an overview of how the method is currently used, interpreted, experienced and perceived in th

APA, Harvard, Vancouver, ISO, and other styles

45

Au, Siu-man Michael. "Construction IT Centre." Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B25945932.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Wichert, Torsten. "Design and Construction Modifications of Switched Reluctance Machines." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:14-ds-1235569858100-62518.

Full text

Abstract:

Although the design principles of the Switched Reluctance Machines (SRMs) are available in different fragments in numerous bibliography positions, there no exists the complex design procedure of whole drive system taking into account the SR Machine, control system and supply device as well. The hybrid design method for SRM drives with application of new analytical calculation methods, finite element method and simulation models is proposed in this thesis. The calculation/design system is characterised by important effectivity and reliability. The new possibilities in analytical determination o

APA, Harvard, Vancouver, ISO, and other styles

47

Wilson, Thomas Rowe. "The design and construction of a flexible manipulator." Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/17354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Fritschij, Michael Josephus. "Reducing cost in kitchen construction through design alternatives." Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=69707.

Full text

Abstract:

The study of cost-saving measures involved in the fit-up of the kitchen is explored, and two strategies of cost-saving are identified: reducing kitchen area; and, simplifying construction materials and assembly techniques. Alternative area requirements, as well as alternative materials and assembly techniques are examined in an effort to reduce cost. The cost of a series of compact kitchen layouts are analysed with respect to alternative construction techniques. A method that assesses the functional requirements of the layouts and costs involved is applied and various cost effective designs ar

APA, Harvard, Vancouver, ISO, and other styles

49

Browne, Thomas 1955. "Design and construction of an experimental paper calender." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60682.

Full text

Abstract:

An experimental paper calender was designed and built to measure paper strain in the nip of the calender as a function of machine speed, load and calender roll radius. The effect of roll deflection due to bending was eliminated by making the calender as narrow as possible while still reproducing industrial conditions in all other aspects. The width of the new machine is 75 mm.<br>Permanent paper strains measured with the new equipment reproduced previously published results. In-nip paper strains were obtained under a variety of calendering conditions. Paper strains under load have previously b

APA, Harvard, Vancouver, ISO, and other styles

50

Khandekar, Sameer Sudhakar. "Design and construction of a magnetic force microscope." Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/2435.

Full text

Abstract:

A magnetic force microscope (MFM) is a special type of scanning force microscope which measures the stray field above a ferromagnetic sample with the help of a ferromagnetic cantilever. The aim of this project was to design and build a MFM head and interface it with a commercial scanning probe electronics controller with the help of an appropriate force sensor. The MFM head and the force sensor were to be designed to work at low temperatures (down to 4 K) and in high vacuum. During this work, a magnetic force microscope (MFM) head was designed. Its design is symmetrical and modular. Two dimen

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!