Log in

Relevant bibliographies by topics / Mills and mill-work Water mills

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Mills and mill-work Water mills'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mills and mill-work Water mills.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mills and mill-work Water mills"

1

Arciszewski, T. J., M. E. McMaster, C. B. Portt, and K. R. Munkittrick. "Detection of food limitation in health of white sucker (Catostomus commersoni) 5 years after the closure of a bleached kraft pulp mill." Water Quality Research Journal 50, no. 2 (2014): 152–66. http://dx.doi.org/10.2166/wqrjc.2014.130.

Full text

Abstract:

Recovery of fish after implementing better management of effluent or following the closure of pulp mills is not well studied. Results from existing studies suggest the predominant responses observed during the operation of mills would predict a pathway of recovery, but this hypothesis has not been tested at mills with variable effects on fish. Multiple studies done at a mill in northern Ontario showed variable responses in white sucker (Catostomus commersoni), including effects on reproductive endpoints. Data from most years failed, however, to meet strict definitions of response patterns used

APA, Harvard, Vancouver, ISO, and other styles

2

gage, fran. "Wheat into Flour: A Story of Milling." Gastronomica 6, no. 1 (2006): 84–92. http://dx.doi.org/10.1525/gfc.2006.6.1.84.

Full text

Abstract:

This article chronicles the milling of wheat beginning with its cultivation about ten thousand years ago. It describes the milling of the grain, starting with primitive hand tools, progressing to larger mills, then the use of animal power to turn milling stones. Changes in the design of the mills made them more efficient. Using flowing water to turn the millstone greatly increased output; people without access to flowing water devised mills turned by the wind. As wheat became a more important crop, an automated system, using elevators and gravity chutes, made it possible to mill even more grai

APA, Harvard, Vancouver, ISO, and other styles

3

Donners, K., M. Waelkens, and J. Deckers. "Water mills in the area of Sagalassos: a disappearing ancient technology." Anatolian Studies 52 (December 2002): 1–17. http://dx.doi.org/10.2307/3643076.

Full text

Abstract:

AbstractAs water mills are quickly disappearing throughout Turkey, it is becoming very difficult to collect information about this type of ancient technology. By means of an ethno-archaeological study carried out in the territory of ancient Sagalassos (Pisidia), the very limited remains of 15 water mills were recorded. Following the recent introduction of electric mills, water mills have lost their previous importance and today some of the mill houses are used as stables or shelters. Interviews with local people provided some information about the capacity of the mills and about the kind of gr

APA, Harvard, Vancouver, ISO, and other styles

4

Çorapçıoğlu, Gülferah. "Conservation of the traditional water mills in the Mediterranean Region of Turkey." Journal of Cultural Heritage Management and Sustainable Development 6, no. 3 (2016): 287–315. http://dx.doi.org/10.1108/jchmsd-02-2015-0002.

Full text

Abstract:

Purpose The purpose of this paper is to ensure the preservation and sustainability of traditional water mills in Turkey with their original function and to allow these water mills to become heritage for future generations. Design/methodology/approach The study is the original examination of one sample water mill to be conserved, that is chosen from 11 water mills that were determined after the investigation of water mills in of Antalya, in Mediterranean Region. A preliminary study was first performed using the external observation method on 11 horizontal wheel water mills. The water mills to b

APA, Harvard, Vancouver, ISO, and other styles

5

Davudov, Omar Malamagomedovich. "WATER MILL STONES FROM SHACHSENGERSKY TOWN." Globus 7, no. 2(59) (2021): 19–23. http://dx.doi.org/10.52013/2658-5197-59-2-2.

Full text

Abstract:

The article considers the water mill stone, discovered in the wall of the residential complex during the excavation of the citadel of the shakhsenger settlement. One of the early information about the water mill belongs to Strabon. He says that in the 90-s year of the 1-st century bc. in the cabins of the Pontus kingdom, the palace of the Mitridate and its water mill were built. At the same time the water mills penetrated in Armenia, ruler (Mithridates relative), which pursued a policy of Hellenization of his country. Since that time, the water mill of the pontian type began to distributed all

APA, Harvard, Vancouver, ISO, and other styles

6

Magomedov, Amirbek J., and Khizri A. Yusupov. "THE MILL TRADITIONAL CRAFTS OF DAGESTAN: ETHNIC CULTURE, TERMINOLOGY." History, Archeology and Ethnography of the Caucasus 17, no. 1 (2021): 211–21. http://dx.doi.org/10.32653/ch171211-221.

Full text

Abstract:

The article is devoted to the characteristics of the traditions of mill crafts in Dagestan, their development in the historical perspective. The topic is poorly researched. At the same time, there are valuable observations on the topic made by Dagestani ethnographers. Admittedly, "mill" adaptations and crafts appear with the advent of agriculture, and crafts using water mills begin to develop in the conditions of arable farming. The design of water mills with a horizontal turbine is considered an invention of the Caucasian peoples. Watermills in Dagestan in the conditions of mountain rivers ha

APA, Harvard, Vancouver, ISO, and other styles

7

Saunamäki, R. "Activated sludge plants in Finland." Water Science and Technology 35, no. 2-3 (1997): 235–43. http://dx.doi.org/10.2166/wst.1997.0527.

Full text

Abstract:

The performance of Finnish activated sludge plants (primary clarifier, equalization basin, buffer basin, aeration basin, secondary clarifier and sludge handling) was surveyed. Performance was generally found to be excellent. BOD7 removal averaged 94% at paper mills (21mg/l effluent concentration, 0.43 kg/t discharge) and 95% at chemical pulp mills (18 mg/l, 0.83 kg/t). CODCr removal averaged 82% at paper mills (158 mg/l effluent concentration, 3.52 kg/t discharge) and 60% at pulp mills (531 mg/l, 20.7 kg/t). Treated effluent from paper mills contained 0.57 mg/l (13.3 g/t) of total phosphorus a

APA, Harvard, Vancouver, ISO, and other styles

8

Reilama, I., and N. Ilomäki. "Respect for the Environment is Part of Competitiveness - Best Available Technology Applied to an Old Pulp Mill at Kaskinen." Water Science and Technology 40, no. 11-12 (1999): 201–6. http://dx.doi.org/10.2166/wst.1999.0713.

Full text

Abstract:

Oy Metsä-Botnia Ab's Kaskinen mill produces ECF and TCF bleached softwood and hardwood pulp on a single continuous production line. Production capacity has been raised from 250,000 tonnes to 420,000 tonnes a year after the commission in 1977. The basic process solutions date mainly from the 1970s. However, process technology has been gradually modernised. With systematic and well-timed process development investments the mill has remained competitive and among frontrunners in terms of environmental protection. Today, Kaskinen represent the best available technology (BAT) applicable to old mill

APA, Harvard, Vancouver, ISO, and other styles

9

Hodgson, Michael E., and Silvia E. Piovan. "Modelling and Mapping Elusive Locations of Historic Water-Powered Grist Mills." Abstracts of the ICA 1 (July 15, 2019): 1–2. http://dx.doi.org/10.5194/ica-abs-1-115-2019.

Full text

Abstract:

<p><strong>Abstract.</strong> Grist mills are structures in which stone wheels are used to grind grain (e.g. corn, wheat) into a powder-like form for human consumption. Circular stone wheels provided the pressure to grind the grain and separate seed components. In most grist mills the energy for turning the heavy stones was derived from water power. The most visible part of some these mills was the externally mounted water wheel. However, other common configurations of the water ‘turbine’ internal to the structure were used (Figure 1). While grist mills existed in Europe at l

APA, Harvard, Vancouver, ISO, and other styles

10

Panneerselvam, L. "Water Pollution Abatement in Small Paper Mills in India." Water Science and Technology 20, no. 1 (1988): 37–48. http://dx.doi.org/10.2166/wst.1988.0006.

Full text

Abstract:

In order to reduce the demand for the forest based raw materials by the organised industrial sectors like the large integrated pulp and paper mills, the Government of India started promoting several small-scale pulp and paper mills based on non-wood agricultural residue raw materials. However promotion of these small mills has created another environmental problem i.e. severe water pollution due to non-recovery of chemicals. Because of the typical characteristics like high silica content etc. of the black liquor produced and the subsequent high capital investment needed for a recovery system,

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Mills and mill-work Water mills"

1

Du, Toit Rene-Marie. "The identification of prevalent bacterial isolates and characterisation of microbial communities in paper-mill water systems." Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-06272008-144355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bauer, Elizabeth Nanette. "MODIFICATION OF AN EXISTING BENTHAL MODEL FOR PAPER MILL WASTES." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/275443.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Rava, Eleonora Maria Elizabeth. "Management of hydrogen sulphide generation at a Kraft paper mill." Diss., Pretoria : [s.n.], 2008. http://upetd.up.ac.za/thesis/available/etd-09152008-113200/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Miller, Matthew J. "An historical examination of water-powered mill sites and markets using geographic information system analysis : Augusta County, Virginia, 1880-1885 /." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-09052009-041037/.

Full text

Abstract:

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1994.<br>Vita. Abstract. One map in back pocket. Includes bibliographical references (leaves 73-75). Also available via the Internet.

APA, Harvard, Vancouver, ISO, and other styles

5

Freyer, Burkhard Heinrich. "Gauge and tension control during the acceleration phase of a steckel hot rolling mill." Diss., University of Pretoria, 2002. http://hdl.handle.net/2263/24580.

Full text

Abstract:

Please read the abstract in the section, 00front of this document<br>Dissertation (M Eng (Electronic Engineering))--University of Pretoria, 2002.<br>Electrical, Electronic and Computer Engineering<br>MEng<br>unrestricted

APA, Harvard, Vancouver, ISO, and other styles

6

Ye, Xing. "Thermal crown development in hot strip mill work rolls and the role of spray cooling." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/30124.

Full text

Abstract:

The objective of this investigation was to determine the influence of work roll cooling on roll thermal behavior. The investigation has been conducted utilizing a previously developed computer model [1]. Three industrial operations were evaluated and features of an optimum configuration have been identified. The magnitude of the thermal zone near the roll surface within which the cyclic temperature variation is confined has been evaluated for different roll cooling conditions. A two dimensional thermal model of a work roll has been developed to predict the thermal field inside the roll, based

APA, Harvard, Vancouver, ISO, and other styles

7

Small, Contessa. "Occupational narratives of pulp and paper mill workers in Corner Brook, Newfoundland : a study in occupational folklife /." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0032/MQ47479.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Long, Xiaoping. "Minimum effluent process for pulp mill." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/11825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Newby, Glynn. "Empirical analysis of cutting force constants in micro end milling operations." Thesis, Available online, Georgia Institute of Technology, 2005, 2005. http://etd.gatech.edu/theses/available/etd-05202005-082651/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Andreatidis, J. P. "Breakage mechanisms and resulting mineral liberation in a bead mill /." [St. Lucia], 1995. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18026.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Mills and mill-work Water mills"

1

Kovács, József. Vízimalmok a Kárpát-medencében: A Kárpát-medence lisztelő vízimalmainak virágkoráról, majd hanyatlásuk időszakáról, illetve néhányuk jelen állapotáról összegyűjtött ismeretek. Romanika Kiadó, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Spoleto, Associazione amici di, ed. Molini e molitura: Le dinamiche dell'Umbria meridionale. Associazione amici di Spoleto, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Staples, Chester O. Mills of southern Africa: Water, wind and horse. Umdaus, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

International Symposium on Molinology (8th 1993 Aberystwyth, Wales). Transactions of the Eighth International Symposium on Molinology: Aberystwyth, 3-10 July, 1993. International Molinological Society, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Soeiro, Teresa. O ocaso das moagens do rio Sousa no município de Penafiel. Museu Municipal de Penafiel, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ozsváth, Gábor Dániel. Patakmalmok a Kárpát-medence keleti felében. Terc, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Stephen, Mills. The Mills of Gloucestershire: Small and large, steam and water driven, cloth and corn, silk and iron--the buildings and the people of the county's past. Barracuda, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Jo, Draper, Watts Martin Antony 1965-, and Town Mill Trust, eds. The Town Mill, Lyme Regis: Archaeology and history AD 1340-2000. Town Mill Trust, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mousnier, Mireille. Moulins et meuniers dans les campagnes européennes, IXe-XVIIIe siècle: Actes des XXIes journées internationales d'histoire de l'abbaye de Flaran 3, 4, 5 septembre 1999. Presses universitaires du Mirail, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Boat mills in Europe from early Medieval to modern times. Landesamt für Archäologie mit Landesmuseum für Vorgeschichte, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Mills and mill-work Water mills"

1

Kumar, Arun, and Jay Shankar Singh. "Distillery and Sugar Mill Wastewater." In Microalgae in Waste Water Remediation. CRC Press, 2021. http://dx.doi.org/10.1201/9780429298080-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gautham, Sumit Kumar, V. V. Dhaneesh, and Basavaraju Manu. "Fenton’s Treatment of Pulp and Paper Mill Effluent." In Water Science and Technology Library. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-5795-3_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Claus, G., and R. Müller. "Biofilms in a Paper Mill Process Water System." In Microbially Influenced Corrosion of Materials. Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/978-3-642-80017-7_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Franco, Walter, Carlo Ferraresi, and Roberto Revelli. "Power Transmission and Mechanisms of an Old Water Mill." In Mechanisms and Machine Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03320-0_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Way, H. W. "Particle size reduction of pigments using a small media mill." In Chemistry and Technology of Water Based Inks. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1547-3_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Yallappa, D., P. F. Mathad, Udaykumar Nidoni, T. Gururaj, R. S. Roopa Bai, and Kenchappa. "Design and Development of Pedal Operated Flour Mill with Multi-Applications." In Water Science and Technology Library. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-5798-4_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Eroğlu, V., İ. öztürk, İ. Toroz, and N. Kor. "Cost Effective Treatment of Textile Mill Effluents by Water Reuse." In New Developments in Industrial Wastewater Treatment. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3272-5_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ebaugh, Helen Rose. "The Water for the Mill: Financing of Gülen-Inspired Service Projects." In The Gülen Movement. Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-1-4020-9894-9_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sharma, Khanindra, Neelotpal Sen Sarma, and Arundhuti Devi. "Paper Mill Effluents: Identification of Emerging Pollutants in Taranga Beel of Assam, India." In Climate Impacts on Water Resources in India. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51427-3_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Monisha, T., S. Rajakumar, and P. M. Ayyasamy. "Microbial-Treated Sago Mill Effluent: A Potential Water Resource for Agroecosystem Management." In Microbiological Research In Agroecosystem Management. Springer India, 2013. http://dx.doi.org/10.1007/978-81-322-1087-0_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mills and mill-work Water mills"

1

Howard, I. C., and A. C. Pugh. "The Development of Structural Integrity Procedures for the Safe Working of Ceramics Industry Ball Mills with Cast Iron Ends." In ASME 2002 Pressure Vessels and Piping Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/pvp2002-1173.

Full text

Abstract:

A ball mill at a ceramics materials company in North Staffordshire exploded in the spring of 2000. Luckily, nobody was injured as a result. Even so, the damage was so extensive that many in and around the ceramics industry rapidly concluded that the industry must introduce suitable operating practices so that the risk of a similar explosion was made acceptably small. As a result, a group of engineers, industry representatives and safety professionals has developed a set of Structural Integrity procedures for adoption in this industry. These mills and their operation are very different from the

APA, Harvard, Vancouver, ISO, and other styles

2

Crofts, John G. "The Original “Silken Valley”: How and Why the Derwent Valley Became the Birthplace of the Industrial Revolution." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33134.

Full text

Abstract:

The paper outlines the history of the extraction of power from the River Derwent in Derbyshire, England, a source of abundant, reliable and vigorous water flow; and how this renewable power source provided power for the industrialization of what were formerly cottage occupations. The Romans introduced Water Wheels to Britain in the 1st century, which were used in the Derwent Valley to grind grist, mine lead, power iron forges and pump water. The prototype factories of the Industrial Revolution were built here, utilizing water power technology to drive textile mills. Cotchett’s Silk Mill, built

APA, Harvard, Vancouver, ISO, and other styles

3

Samanta, S., and S. Ghosh. "Energetic and Environmental Analysis of Partial Repowering of a Coal Fired Power Plant Through Upstream GT Integration and Employing Waste Heated Feed Water Heaters." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-27027.

Full text

Abstract:

This paper presents a theoretical study of partial repowering scheme for an existing 210MW coal fired power plant and reports predicted performance improvement obtainable from the repowering by using Cycle Tempo software. In this method old boiler is used as it is, only modifying its air heater and forced flow sections. Out of four operating coal mills, one mill is considered to be taken out. A new natural gas fired gas turbine (GT) block is considered to be integrated with the existing plant whose exhaust is fed to the existing boiler. The GT size is selected such that its exhaust provide hea

APA, Harvard, Vancouver, ISO, and other styles

4

Furuki, Tatsuya, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, and Kiyofumi Inaba. "Fabrication of Electroplated CBN End-Mill for High-Efficiency Face Milling of Carbon Fiber Reinforced Plastic." In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9280.

Full text

Abstract:

Carbon fiber reinforced plastic (CFRP) was developed in the 1960s. Since then, it has been used in various fields. Accordingly, the number of studies related to machining of CFRP has been increasing (e.g. cutting, laser processing, or abrasive water jet machining). However, these studies have been focusing on the trimming of surplus portions or drilling. In addition, the degradation of mechanical properties due to the heat induced during machining has not been sufficiently considered. Furthermore, another issue is the cost involved, such as tool and equipment costs. This makes several of these

APA, Harvard, Vancouver, ISO, and other styles

5

Timms, Chris, Doug Swanek, Duane DeGeer, et al. "TurkStream Collapse Test Program." In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-78454.

Full text

Abstract:

The TurkStream pipeline project is designed to transport approximately 32 billion cubic meters of natural gas annually from Russia to Turkey under the Black Sea, with more than 85% of the deep-water route being deeper than 2000 m. The offshore section is intended to consist of two parallel lines, each approximately 900 km long. The preliminary stages of the front end engineering design (pre-FEED) phase was managed by INTECSEA. To support the analyses and design of the deepest portions, a full scale collapse test program was performed by C-FER Technologies (C-FER). This collapse test program, w

APA, Harvard, Vancouver, ISO, and other styles

6

Sortman, Vincent L., and Robert M. Lambert. "Restoring Mill Creek in Lower Merion Township." In World Water and Environmental Resources Congress 2003. American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40685(2003)338.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Nelson, Andrew W., Feng Zhang, Arif S. Malik, and Mark E. Zipf. "Sizing Design for 4-High Cold Rolling Mills." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4137.

Full text

Abstract:

As the demand for thin and ultra-thin gage for cold-rolled sheet metals increases, cold rolling manufacturers and sheet metal producers must utilize technological advancements to stay competitive globally. To manufacture a competitive rolling mill, the mill designer must identify an appropriate mill configuration, roll sizes, and flatness control systems, etc. The design must be robust enough to accommodate broad product envelopes containing strips of different widths, gages, and materials. At the same time, the mill “sizing” must be competitive by avoiding over- or under-design. These two obj

APA, Harvard, Vancouver, ISO, and other styles

8

Owoputi, Lawrence, Ifeanyi Odigboh, and Mark Chalecki. "Hydrologic Study of Mill Run Watershed, Altoona, Pennsylvania." In World Water and Environmental Resources Congress 2003. American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40685(2003)290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stenstrom, Christer, Johan E. Carlson, and Jan Lundberg. "Mining mill condition monitoring using water jet ultrasonics." In 2012 IEEE International Ultrasonics Symposium. IEEE, 2012. http://dx.doi.org/10.1109/ultsym.2012.0480.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Suursaar, Ü., R. Aps, G. Martin, A. Põllumäe, and K. Kaljurand. "Monitoring of pulp mill effluents in the coastal waters of North Estonia." In WATER POLLUTION 2008. WIT Press, 2008. http://dx.doi.org/10.2495/wp080211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mills and mill-work Water mills"

1

Deford, Lillian. Story Mill Hydrology and Water Quality Data [dataset]. Montana State University ScholarWorks, 2016. http://dx.doi.org/10.15788/m2tg6c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Modell, M. Treatment of pulp mill sludges by supercritical water oxidation. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6282413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Fuerstenau, D. W. Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6698413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Author, Not Given. Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume I. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/1132806.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Author, Not Given. Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume II. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/1132807.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hamilton, L. D., W. H. Medeiros, A. Meinhold, et al. Evaluation of health risks associated with proposed ground water standards at selected inactive uranium mill-tailings sites. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6752623.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fuerstenau, D. W., and A. De. Rheology of coal-water slurries prepared by the high-pressure roll mill grinding of coal. Final report. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/415363.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Author, Not Given. Final programmatic environmental impact statement for the Uranium Mill Tailings Remedial Action Ground Water Project. Volume 1. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/270745.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Fuerstenau, D. W. Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Quarterly technical progress report No. 4, June 1--August 1993. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10109147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fuerstenau, D. W. Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Quarterly technical progress report No. 5, September 1--November 30, 1993. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10141508.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!