Dissertations / Theses: 'MIMO (Multi-Input and Multi-Output)'

1

Baskar, Siddharth. "Architecture for Multi Input Multi Output CompressiveRadars." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1503302518672948.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jaber, Dana N. "Multi-input multi-output (MIMO) detection by a colony of ants." [College Station, Tex. : Texas A&M University, 2006. http://hdl.handle.net/1969.1/ETD-TAMU-1778.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

El, Rashid Mohamad. "Study of Multiport Antenna Systems on Terminals for WLAN : MIMO Technology." Thesis, University of Gävle, Ämnesavdelningen för elektronik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-4420.

Full text

Abstract:

Using more than just on antenna can significantly speed up the data rate in a wireless communication system. These systems are commonly referred to as Diversity- and MIMO-systems. Due to tight volume restriction for the antennas, e.g. in a mobile phone, electromagnetic coupling between the antennas will degrade the capacity of the wireless system and lower the coverage.In the proposed thesis, a thorough study of Ethertronics’ standard antennas will be established in which the antennas will be used in a multiport system, e.g. MIMO. The thesis will be strongly related to Ethertronics’ engagement in Chase and therefore also dependent on the latest progresses on MPA (Multiport Analyzer) developed in Chase. The thesis will result in a working methodology how to use MPA plus design-, location- and orientation rules for the standard antennas used in a multiport system.

APA, Harvard, Vancouver, ISO, and other styles

4

Coskun, Adem. "Downlink Transmission Techniques For Multi User Multi Input Multi Output Wireless Communications." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/2/12608750/index.pdf.

Full text

Abstract:

Multi-user MIMO (MIMO-MU) communication techniques make use of available channel state information at the transmitter to mitigate the inter-user interference. The goal of these techniques is to provide the least interference at the mobile stations by applying a precoding operation. In this thesis a comparison of available techniques in the literature such as Channel Decomposition, SINR Balancing, Joint-MMSE optimization is presented. Novel techniques for the MIMO multi-user downlink communication systems, where a single stream is transmitted to each user are proposed. The proposed methods, different from the other methods in the literature, use a simple receiver to combat the interference. It has been shown that MRC based receivers are as good as more complicated joint MMSE receivers.

APA, Harvard, Vancouver, ISO, and other styles

5

Allen, Matthew Scott. "Global and Multi-Input-Multi-Output (MIMO) Extensions of the Algorithm of Mode Isolation (AMI)." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6877.

Full text

Abstract:

A wide range of dynamic systems can be approximated as linear and time invariant, for which a wealth of tools are available to characterize or modify their dynamic characteristics. Experimental modal analysis (EMA) is a procedure whereby the natural frequencies, damping ratios and mode shapes which parameterize vibratory, linear, time invariant systems are derived from experimentally measured response data. EMA is commonly applied in a multitude of applications, for example, to generate experimental models of dynamic systems, validate finite element models and to characterize dissipation in vibratory systems. Recent EMA has also been used to characterize damage or defects in a variety of systems. The Algorithm of Mode Isolation (AMI), presented by Drexel and Ginsberg in 2001, employs a unique strategy for modal parameter estimation in which modes are sequentially identified and subtracted from a set of FRFs. Their natural frequencies, damping ratios and mode vectors are then refined through an iterative procedure. This contrasts conventional multi-degree-of-freedom (MDOF) identification algorithms, most of which attempt to identify all of the modes of a system simultaneously. This dissertation presents a hybrid multi-input-multi-output (MIMO) implementation of the algorithm of mode isolation that improves the performance of AMI for systems with very close or weakly excited modes. The algorithmic steps are amenable to semi-automatic identification, and many FRFs can be processed efficiently and without concern for ill-conditioning, even when many modes are identified. The performance of the algorithm is demonstrated on noise contaminated analytical response data from two systems having close modes, one of which has localized modes while the other has globally responsive modes. The results are compared with other popular algorithms. MIMO-AMI is also applied to experimentally obtained data from shaker excited tests of the Z24 highway bridge, demonstrating the algorithm's performance on a data set typical of many EMA applications. Considerations for determining the number of modes active in the frequency band of interest are addressed, and the results obtained are compared to those found by other groups of researchers.

APA, Harvard, Vancouver, ISO, and other styles

6

Sevelimedu, Veeravalli Vinodh. "Study of MIMO, orthogonal codes and core operator architecture design for ML decoder." Thesis, Linköping University, Department of Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10155.

Full text

Abstract:

In the high-end research process of wireless systems and in the race for the development of the new technologies, MIMO (Multiple Input, Multiple Output) is getting more attention now days. It has a high potential usage in the 3G and 4G communications and beyond. The MIMO based system has got the ability to increase the data throughput in spectrum-limited conditions. With the increase and complexity of wireless applications, the spectrum efficiency improvement in the physical layer will be saturated. MIMO is predicted to be one of the major features for the next generation wireless networking. This thesis work is a part of an ongoing project of the Generic MIMO decoder design carried out at the research laboratory, LESTER at Lorient, France. I was involved in the study of MIMO concepts, orthogonal and Space-time codes and later involved in the design and optimization of the architecture for the core operator for the ML decoder used in the reception of the MIMO system,which is presented in this report work.

APA, Harvard, Vancouver, ISO, and other styles

7

Jiang, Ping, and H. Chen. "Nussbaum gain based iterative learning control for a class of multi-input multi-output nonlinear systems." IEEE, 2005. http://hdl.handle.net/10454/3500.

Full text

Abstract:

Yes An adaptive iterative learning control(ILC) approach is proposed for a class of multi-input multi-output (MIMO) uncertain nonlinear systems without prior knowledge about system control gain matrices. The Nussbaum-type gain and the positive definite discrete matrix kernel are proposed for dealing with selection of the unknown control gain and learning of the repeatable uncertainties, respectively. Asymptotic convergence for a trajectory tracking within a finite time interval is achieved through repetitive tracking. Simulations are carried out to show the validity of the proposed control method.

APA, Harvard, Vancouver, ISO, and other styles

8

Nguyen, Chuong Hoang. "Adaptive Predictor-Based Output Feedback Control of Unknown Multi-Input Multi-Output Systems: Theory and Application to Biomedical Inspired Problems." Diss., Virginia Tech, 2016. http://hdl.handle.net/10919/71312.

Full text

Abstract:

Functional Electrical Stimulation (FES) is a technique that applies electrical currents to nervous tissue in order to actively induce muscle contraction. Recent research has shown that FES provides a promising treatment to restore functional tasks due to paralysis caused by spinal cord injury, head injury, and stroke, to mention a few. Therefore, the overarching goal of this research work is to develop FES controllers to enable patients with movement-disorder to control their limbs in a desired manner and, in particular, to aid Parkinson's patients to suppress hand tremor. In our effort to develop strategies for muscle stimulation control, we first implement a model-based control technique assuming that all the states are measurable. The Hill-type muscle model coupled with a simplified 2DoF model of the arm is used to study the performance of our proposed adaptive sliding mode controller for simulation purpose. However, in the more practical situations, human limb dynamics are extremely complicate and it is inadequate to use model based controllers, especially considering there are still technical limitations that allow in vivo measurements of muscle activity. To tackle these challenges, we have developed output feedback adaptive control approaches for a class of unknown multi-input multi-output systems. Such control strategies are first developed for linear systems, and then extended to the nonlinear case. The proposed controllers, supported by experimental results, require minimum knowledge of the system dynamics and avoid many restrictive assumptions typically found in the literature. Therefore, we expect that the results introduced in this dissertation can provide a solution for a wide class of nonlinear uncertain systems, with focus on practical issues such as partial state measurement and the presence of mismatched uncertainties. Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

9

Yankevich, Evgeny. "Design of an Airborne Multi-input Multi-output Radar Emulator Testbed for Ground Moving Target Identification Applications." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1345571650.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Shi, Yan. "Robust Signaling, Scheduling and Authentication in the Multi-User Multiple-Input-Multiple-Output Channel." BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/2808.

Full text

Abstract:

Multiple-input multiple-output (MIMO) networks are known to be able to achieve throughput performance superior to that available from single-input single-output (SISO) systems. However, when applying MIMO in multi-user networks, achieving this throughput advantage requires efficient precoding and optimal network scheduling. Furthermore, MIMO radios can help ensure security in a multi-user network. Previous work has proposed various precoding techniques for the MIMO broadcast channel, based either on channel state information (CSI) or channel distribution information (CDI), which achieve optimal or near- optimal MIMO channel throughput. The performance of these techniques largely depends on the availability of the channel information at the transmitter that must be fed back from the receiver. However, the past work has not examined the impact of latency caused by feedback of channel information and computation. This research proposes a performance metric to measure the throughput degradation caused by compression and feedback of channel information. We further propose an effective data compression technique based on the Karhunen-Lo`eve (KL) Transform and show that linear precoding (beamforming) based on CDI can achieve superior performance by providing stable channel throughput in both time- varying and frequency-selective channels. Very little prior work exists on optimal scheduling for multi-user MIMO networks, particularly in time-varying channels. One reason for this is that hybrid MIMO channels permit much more complex channel structures, such as broadcast channel (BC) and multiple access channel (MAC), whose capacity is limited not only by random channel noise but also by the multi-user interference. Furthermore, the achieved MIMO channel throughput depends on the spatial characteristics of the multi-user channels, a feature not captured by traditional network models based on signal-to-noise ratio and Doppler. Therefore, achieving near optimal performance requires development of scheduling techniques that depend on detailed channel characteristics. This dissertation proposes a novel parametric representation of the channel that simply describes the complex multi-user MIMO channels and allows for efficient scheduling. Because of the computational and feedback efficiency enabled by this parametric approach, it achieves low latency and therefore excellent performance.Finally, in any network setting, security is an important consideration. Specifically authentication ensures that unauthorized users do not gain network access. Unfortunately, user identity can be relatively easy to forge. This work therefore explores the user of radio- metric fingerprinting that uniquely identifies a device by unique imperfections in its transmitted waveform. This work shows that by applying this fingerprinting technique to MIMO devices, authentication reliability can be dramatically improved. The work also develops an information-theoretic approach to identify the optimal set of radiometric features to use for authentication and further considers the impact of drift in radiometric features on authentication performance.

APA, Harvard, Vancouver, ISO, and other styles

11

Spencer, Quentin H. "Transmission Strategies for Wireless Multi-user, Multiple-Input, Multiple-Output Communication Channels." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd378.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Peters, Gavin M. "Time Division Duplex (TDD) Multi-User Multiple-Input, Multiple-Output (MU-MIMO) Mobile Ad-Hoc Network(MANET)." University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1563525886227608.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Potter, Chris. "Single Bounce Air to Ground Communication Channel Capacity for MIMO Applications." International Foundation for Telemetering, 2006. http://hdl.handle.net/10150/604770.

Full text

Abstract:

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California This paper addresses the air-to-ground communication problem, where multiple transmit antennas are used on the aircraft to combat multi-path interference. The channel is assumed to have a line-of-sight component and a single ground reflection. Multiple input multiple output (MIMO) techniques can be used in this situation, to increase the reliability and data rate. In this paper we discuss how the MIMO channel capacity changes, with the aircraft antenna configuration, altitude, velocity, range, and a number of other parameters. For comparison, the MIMO results are compared to systems which have single antennas at the transmitter, at the receiver, or at both ends.

APA, Harvard, Vancouver, ISO, and other styles

14

Budhathoki, Krishna Ram. "Precoder Design for Cooperative Cognitive Radio Systems." University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1363180310.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Erpek, Tugba. "Multi-layer Optimization Aspects of Deep Learning and MIMO-based Communication Systems." Diss., Virginia Tech, 2019. http://hdl.handle.net/10919/102705.

Full text

Abstract:

This dissertation addresses multi-layer optimization aspects of multiple input multiple output (MIMO) and deep learning-based communication systems. The initial focus is on the rate optimization for multi-user MIMO (MU-MIMO) configurations; specifically, multiple access channel (MAC) and interference channel (IC). First, the ergodic sum rates of MIMO MAC and IC configurations are determined by jointly integrating the error and overhead effects due to channel estimation (training) and feedback into the rate optimization. Then, we investigated methods that will increase the achievable rate for parallel Gaussian IC (PGIC) which is a special case of MIMO IC where there is no interference between multiple antenna elements. We derive a generalized iterative waterfilling algorithm for power allocation that maximizes the ergodic achievable rate. We verified the sum rate improvement with our proposed scheme through extensive simulation tests. Next, we introduce a novel physical layer scheme for single user MIMO spatial multiplexing systems based on unsupervised deep learning using an autoencoder. Both transmitter and receiver are designed as feedforward neural networks (FNN) and constellation diagrams are optimized to minimize the symbol error rate (SER) based on the channel characteristics. We first evaluate the SER in the presence of a constant Rayleigh-fading channel as a performance upper bound. Then, we quantize the Gaussian distribution and train the autoencoder with multiple quantized channel matrices. The channel is provided as an input to both the transmitter and the receiver. The performance exceeds that of conventional communication systems both when the autoencoder is trained and tested with single and multiple channels and the performance gain is sustained after accounting for the channel estimation error. Moreover, we evaluate the performance with increasing number of quantization points and when there is a difference between training and test channels. We show that the performance loss is minimal when training is performed with sufficiently large number of quantization points and number of channels. Finally, we develop a distributed and decentralized MU-MIMO link selection and activation protocol that enables MU-MIMO operation in wireless networks. We verified the performance gains with the proposed protocol in terms of average network throughput. Doctor of Philosophy

APA, Harvard, Vancouver, ISO, and other styles

16

Hameed, Khalid W. H. "Multiuser Multi Input Single Output (MU-MISO) Beamforming for 5G Wireless and Mobile Networks. A Road Map for Fast and Low Complexity User Selection, Beamforming Scheme Through a MU-MISO for 5G Wireless and Mobile Networks." Thesis, University of Bradford, 2019. http://hdl.handle.net/10454/18445.

Full text

Abstract:

Multi-User Multi-Input Multi-Output (MU-MIMO) systems are considered to be the sustainable technologies of the current and future of the upcoming wireless and mobile networks generations. The perspectives of these technologies under several scenarios is the focus of the present thesis. The initial system model covers the MU-MIMO, especially in the massive form that is considered to be the promising ideas and pillars of the 5G network. It is observed that the optimal number of users should be served in the time-frequency resource even though the maximum limitation of the MU-MIMO is governed by the total receiving antennas (K) is less than or equal to the base station antennas (M). The system capacity of the massive MIMO (mMIMO) under perfect channel state information (CSI) of uncorrelated channel is investigated and studied. Two types of precoders were applied, one is directly based on channel inversion, and the other uses the Eigen decomposition that is derived subject to the signal to a leakage maximization problem. The two precoders show a degree of equivalency under certain assumptions for the number of antennas at the user end. The convex optimization of multi-antenna networks to achieve the design model of optimum beamformer (BF) based on the uniform linear array (ULA) is studied. The ULA is selected for its simplicity to analyse many scenarios and its importance to match the future network applied millimetre wave (mmWave) spectrum. The maximum beams generated by the ULA are explored in terms of several physical system parameters. The duality between the MU-MIMO and ULA and how they are related based on beamformer operation are detailed and discussed. Finally, two approaches for overloaded systems are presented when the availability of massive array that is not guaranteed due to physical restrictions since the existence of a large number of devices will result in breaking the dimension rule (i.e., K ≤ M). As a solution, a low complexity users selection algorithm is proposed. The channel considered is uncorrelated with full and perfect knowledge at the BS. In particular, these two channel conditions may not be available in all scenarios. The CSI may be imperfect, and even the instantaneous form does not exist. A hybrid precoder between the mixed CSI (includes imperfect and statistical) and rate splitting approach is proposed to deal with an overloaded system under a low number of BS antennas. Ministry of Higher Education and Scientific Research of Iraq

APA, Harvard, Vancouver, ISO, and other styles

17

Dioum, Ibra. "Conception de systèmes multi-antennaires pour techniques de diversité et MIMO : application aux petits objets nomades communicants." Phd thesis, Université Nice Sophia Antipolis, 2013. http://tel.archives-ouvertes.fr/tel-00935084.

Full text

Abstract:

La demande de transmissions à débits de plus en plus élevés s'accentue davantage avec l'essor de nouveaux services dans les réseaux de communication sans fils. Pour répondre à cette demande, une solution consiste à augmenter la capacité de transmission du canal radiofréquence entre la station de base et le terminal portatif. Ceci peut être réalisé en augmentant le nombre d'éléments rayonnant impliqués à l'émission et à la réception de cette liaison radiofréquence : on parle alors de technique MIMO (Multiple Input, Multiple Output). Cette thèse porte principalement sur la conception, l'optimisation et la caractérisation de systèmes multi-antennaires pour techniques de diversité et MIMO en bandes LTE (Long Term Evolution). Trois prototypes multi-bandes sont proposés dont deux systèmes planaires et un système d'antennes IFAs compactes. De nouvelles solutions multi-bandes et l'influence de la position de l'antenne sur le plan de masse sont étudiées pour réaliser de la diversité spatiale, de polarisation et de diagramme de rayonnement avec une faible corrélation entre les signaux reçus sur chaque antenne mais surtout une bonne efficacité totale. Une ligne de neutralisation est utilisée pour isoler les antennes et un fonctionnement multi-bande est réalisé. L'impédance d'entrée des antennes est étudiée avec la méthode de Youla & Carlin afin d'améliorer la bande passante de la structure compacte de type IFA. Les performances en diversité et en MIMO de ces systèmes sont évaluées dans différents environnements de propagation. Elles montrent que ces systèmes peuvent être utilisés efficacement pour des applications en diversité et MIMO.

APA, Harvard, Vancouver, ISO, and other styles

18

Cao, Pan. "Resource Allocation for Multiple-Input and Multiple-Output Interference Networks." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-161382.

Full text

Abstract:

To meet the exponentially increasing traffic data driven by the rapidly growing mobile subscriptions, both industry and academia are exploring the potential of a new genera- tion (5G) of wireless technologies. An important 5G goal is to achieve high data rate. Small cells with spectrum sharing and multiple-input multiple-output (MIMO) techniques are one of the most promising 5G technologies, since it enables to increase the aggregate data rate by improving the spectral efficiency, nodes density and transmission bandwidth, respectively. However, the increased interference in the densified networks will in return limit the achievable rate performance if not properly managed. The considered setup can be modeled as MIMO interference networks, which can be classified into the K-user MIMO interference channel (IC) and the K-cell MIMO interfering broadcast channel/multiple access channel (MIMO-IBC/IMAC) according to the number of mobile stations (MSs) simultaneously served by each base station (BS). The thesis considers two physical layer (PHY) resource allocation problems that deal with the interference for both models: 1) Pareto boundary computation for the achiev- able rate region in a K-user single-stream MIMO IC and 2) grouping-based interference alignment (GIA) with optimized IA-Cell assignment in a MIMO-IMAC under limited feedback. In each problem, the thesis seeks to provide a deeper understanding of the system and novel mathematical results, along with supporting numerical examples. Some of the main contributions can be summarized as follows. It is an open problem to compute the Pareto boundary of the achievable rate region for a K-user single-stream MIMO IC. The K-user single-stream MIMO IC models multiple transmitter-receiver pairs which operate over the same spectrum simultaneously. Each transmitter and each receiver is equipped with multiple antennas, and a single desired data stream is communicated in each transmitter-receiver link. The individual achievable rates of the K users form a K-dimensional achievable rate region. To find efficient operating points in the achievable rate region, the Pareto boundary computation problem, which can be formulated as a multi-objective optimization problem, needs to be solved. The thesis transforms the multi-objective optimization problem to two single-objective optimization problems–single constraint rate maximization problem and alternating rate profile optimization problem, based on the formulations of the ε-constraint optimization and the weighted Chebyshev optimization, respectively. The thesis proposes two alternating optimization algorithms to solve both single-objective optimization problems. The convergence of both algorithms is guaranteed. Also, a heuristic initialization scheme is provided for each algorithm to achieve a high-quality solution. By varying the weights in each single-objective optimization problem, numerical results show that both algorithms provide an inner bound very close to the Pareto boundary. Furthermore, the thesis also computes some key points exactly on the Pareto boundary in closed-form. A framework for interference alignment (IA) under limited feedback is proposed for a MIMO-IMAC. The MIMO-IMAC well matches the uplink scenario in cellular system, where multiple cells share their spectrum and operate simultaneously. In each cell, a BS receives the desired signals from multiple MSs within its own cell and each BS and each MS is equipped with multi-antenna. By allowing the inter-cell coordination, the thesis develops a distributed IA framework under limited feedback from three aspects: the GIA, the IA-Cell assignment and dynamic feedback bit allocation (DBA), respec- tively. Firstly, the thesis provides a complete study along with some new improvements of the GIA, which enables to compute the exact IA precoders in closed-form, based on local channel state information at the receiver (CSIR). Secondly, the concept of IA-Cell assignment is introduced and its effect on the achievable rate and degrees of freedom (DoF) performance is analyzed. Two distributed matching approaches and one centralized assignment approach are proposed to find a good IA-Cell assignment in three scenrios with different backhaul overhead. Thirdly, under limited feedback, the thesis derives an upper bound of the residual interference to noise ratio (RINR), formulates and solves a corresponding DBA problem. Finally, numerical results show that the proposed GIA with optimized IA-Cell assignment and the DBA greatly outperforms the traditional GIA algorithm.

APA, Harvard, Vancouver, ISO, and other styles

19

Nobilet, Jean-Michel. "Systèmes MIMO (" Multiple Input Multiple Output ") à porteuses multiples :Etude et optimisation de la combinaison de codes temps-espace et des techniques MC-CDMA (" Multi-carrier code division multiple access ")." Rennes, INSA, 2004. http://www.theses.fr/2004ISAR0006.

Full text

Abstract:

Dans la recherche de modulations adaptées à la voie descendante des systèmes cellulaires 4G, les systèmes MC-CDMA s'affirment comme des solutions à fort potentiel. En parallèle, les systèmes MIMO constituent une nouvelle voie très prometteuse améliorant notablement l'efficacité spectrale des systèmes hertziens via la dimension spatiale. Cette thèse porte sur l'optimisation de systèmes MIMO/MCCDMA par l'étude des codes temps-espace en blocs ou en treillis. Après un état de l'art, nous proposons de nouveaux codes STBC orthogonaux, puis une représentation des STTC basée sur une notation polynômiale permettant la comparaison des codes existants. La combinaison STBC/MC-CDMA étudiée améliore sensiblement les performances d'un système MC-CDMA SISO avec un décodage peu complexe. Leur optimisation repose sur des techniques de détection mono-utilisateurs ou multi-utilisateurs. Leur performances sont évaluées sur des canaux théoriques ou réalistes. Enfin, la combinaison STTC/MC-CDMA est étudiée In the context of the research of new modulation schemes for the downlink of the 4th Generation mobile radio systems, the MC-CDMA schemes are the most promising candidates. On the other hand, MIMO systems inherit space diversity to mitigate fading effects and improve dramatically the spectrum efficiency. This thesis deals with the optimisation of MIMO/MC-CDMA systems through the use of space-time block coding or trellis coding. We propose new orthogonal STBC and a new representation of STTC based on a polynomial notation. The studied STBC/MC-CDMA systems improve the performance of a MC-CDMA SISO system with a low complex decoding. Their optimisation is based on single-user and multiple-user detection schemes. Their performance are evaluated on theoretical and realistic channels. Finally, the STTC/MC-CDMA is studied

APA, Harvard, Vancouver, ISO, and other styles

20

Abaza, Mohamed. "Cooperative MIMO techniques for outdoor optical wireless communication systems." Thesis, Brest, 2015. http://www.theses.fr/2015BRES0073/document.

Full text

Abstract:

Au cours de la dernière décennie, les communications optiques en espace libre (FSO) ont pris de l’ampleur dans les deux domaines académiques et industriels. L’importance de FSO s’appuie sur la possibilité de faire un système de transmission économique et écologique avec un débit élevé et sans licence à l’opposition des systèmes de transmission radiofréquences (RF). Dans la plupart des travaux antécédents sur les systèmes multi-émetteurs, seulement les canaux décorrélés ont été considérés. Un canal décorrélé nécessite un espace suffisant entre les émetteurs. Cette condition devient difficile et non-réalisable dans certaines applications. Pour cette raison, nos études se focalisent sur les performances des codes à répétition RC (Repitition Codes) et les codes OSTBC (Orthogonal Space-Time Block Codes) dans des canaux log-normaux corrélés en utilisant une modulation d’intensité et une détection directe (IM/DD). En addition, les effets des différentes conditions météorologiques sur le taux d’erreur moyen (ABER) sont étudiés. Les systèmes FSO à multi-entrées/ multi-sorties MIMO (Multiple-Input Multiple-Output) avec une modulation SSK (Space Shift Keying) ont été abordés. Les résultats obtenus montrent que la SSK est supérieure aux RC avec une modulation d’impulsion (Multiple Pulse Amplitude Modulation) pour toute efficacité spectrale égale ou supérieure à 4 bit/s/Hz. Nous avons aussi analysé les performances d’un système à sauts multiples (Multi-Hop) et des relais à transmission directe (forward relays). Nos simulations montrent que le système ainsi considéré est efficace pour atténuer les effets météorologiques et les pertes géométriques dans les systèmes de communication FSO. Nous avons montré qu’un tel système avec plusieurs entrées et une sortie (MISO, i.e. multiple-input single-output) à sauts multiples est supérieur à un système MISO avec un lien direct (direct link) avec une forte atténuation. Pour satisfaire la demande croissante des réseaux de communication à débits élevés, la communauté scientifique s'intéresse de plus en plus aux systèmes FSO avec des relais full-duplex (FD). Pour ces derniers systèmes, nous avons étudié la probabilité d'erreur moyenne (ABER) et nous avons analysé leurs performances. En considérant des différentes conditions de transmission, les performances de relais FD ont été comparées à celles d'un système avec un lien direct ou des relais half-duplex. Les résultats obtenus montrent que les relais FD ont le minimum ABER. En conséquence, les résultats obtenus dans cette thèse sont très prometteurs pour la prochaine génération de FSO Free-space optical (FSO) communication has been the subject of ongoing research activities and commercial attention in the past few years. Such attention is driven by the promise of high data rate, license-free operation, and cheap and ecological friendly means of communications alternative to congested radio frequency communications. In most previous work considering multiple transmitters, uncorrelated channel conditions have been considered. An uncorrelated channel requires sufficient spacing between transmitters. However, this can be difficult and may not be always feasible in some applications. Thereby, this thesis studies repetition codes (RCs) and orthogonal space-time block codes performance in correlated log-normal FSO channels using intensity modulation and direct detection (IM/DD). Furthermore, the effect of different weather conditions on the average bit error rate (ABER) performance of the FSO links is studied. Multiple-input multiple-output (MIMO) FSO communication systems using space shift keying (SSK) modulation have been also analyzed. Obtained results show that SSK is a potential technique for spectral efficiencies equal or greater than 4 bits/s/Hz as compared to RCs with multiple pulse amplitude modulations. The performance analysis of a multi-hop decode and forward relays for FSO communication system using IM/DD is also considered in this thesis. It is shown that multi-hop is an efficient technique to mitigate atmospheric turbulence and different weather attenuation effects and geometric losses in FSO communication systems. Our simulation results show that multiple-input single-output (MISO) multi-hop FSO systems are superior to direct link and MISO systems over links exhibiting high attenuation. Meeting the growing demand for higher data rates communication networks, a system with full-duplex (FD) relays is considered. For such a system, the outage probability and the ABER performance are analyzed under different turbulence conditions, misalignment error and path loss effects. FD relays are compared with the direct link and half-duplex relays. Obtained results show that FD relays have the lowest ABER and the outage probability as compared to the two other systems. Finally, the obtained results in this thesis are very promising towards the next generation of FSO systems

APA, Harvard, Vancouver, ISO, and other styles

21

Ghazali, Abu Baker Mhd. "Advanced controllers for building energy management systems : advanced controllers based on traditional mathematical methods (MIMO P+I, state-space, adaptive solutions with constraints) and intelligent solutions (fuzzy logic and genetic algorithms) are investigated for humidifying, ventilating and air-conditioning applications." Thesis, University of Bradford, 1996. http://hdl.handle.net/10454/4197.

Full text

Abstract:

This thesis presents the design and implementation of control strategies for building energy management systems (BEMS). The controllers considered include the multi PI-loop controllers, state-space designs, constrained input and output MIMO adaptive controllers, fuzzy logic solutions and genetic algorithm techniques. The control performances of the designs developed using the various methods based on aspects such as regulation errors squared, energy consumptions and the settling periods are investigated for different designs. The aim of the control strategy is to regulate the room temperature and the humidity to required comfort levels. In this study the building system under study is a 3 input/ 2 output system subject to external disturbances/effects. The three inputs are heating, cooling and humidification, and the 2 outputs are room air temperature and relative humidity. The external disturbances consist of climatic effects and other stochastic influences. The study is carried out within a simulation environment using the mathematical model of the test room at Loughborough University and the designed control solutions are verified through experimental trials using the full-scale BMS facility at the University of Bradford.

APA, Harvard, Vancouver, ISO, and other styles

22

Abouseif, Akram. "Emerging DSP techniques for multi-core fiber transmission systems." Electronic Thesis or Diss., Institut polytechnique de Paris, 2020. http://www.theses.fr/2020IPPAT013.

Full text

Abstract:

Les systèmes de communication optique ont connu plusieurs phases de développement au cours des dernières décennies. Ils approchent aujourd'hui les limites de capacité du cana non-linéaire. L'espace est aujourd'hui le dernier degré de liberté à mettre en œuvre afin de continuer à répondre aux demandes de capacité à venir pour les prochaines années. Par conséquent, des recherches intensives sont menées pour explorer tous les aspects concernant le déploiement du système de multiplexage par division spatiale (SDM). Plusieurs dégradations ont un impact sur les systèmes SDM en raison de l'interaction des canaux spatiaux qui dégrade les performances du système. Dans cette thèse, nous nous concentrons sur les fibres multicœurs (MCF) comme l'approche la plus prometteuse pour être le premier représentant du système SDM. Nous présentons différentes solutions numériques et optiques pour atténuer l'effet non unitaire connu sous le nom de perte dépendante du cœur (CDL). La première partie est consacrée à l'étude des performances de la transmission MCF en tenant compte des dégradations de propagation qui impactent les systèmes MCF. Nous proposons un modèle de canal qui aide à identifier le système MCF. La deuxième partie est consacrée à la technique optique pour améliorer les performances de transmission avec une solution optimale pour la réduction des CDL. Ensuite, nous avons introduit des techniques numériques pour des améliorations supplémentaires, la pré-compensation Zero Forcing et le codage spatio-temporel pour une atténuation CDL supplémentaire. Tous les résultats de simulation sont validés analytiquement en dérivant les bornes supérieures de probabilité d'erreur Optical communication systems have seen several phases in the last decades. It is predictable that the optical systems as we know will reach the non-linear capacity limits. At the moment, the space is the last degree of freedom to be implemented in order to keep delivering the upcoming capacity demands for the next years. Therefore, intensive researches are conducted to explore all the aspects concerning the deployment of the space-division multiplexing (SDM) system. Several impairments impact the SDM systems as a result from the interaction of the spatial channels which degrades the system performance. In this thesis, we focus on the multi-core fibers (MCFs) as the most promising approach to be the first representative of the SDM system. We present different digital and optical solutions to mitigate the non-unitary effect known as the core dependent loss (CDL). The first part is dedicated to study the performance of the MCF transmission taking into account the propagating impairments that impact the MCF systems. We propose a channel model that helps to identify the MCFs system. The second part is devoted to optical technique to enhance the transmission performance with an optimal solution. After, we introduced digital techniques for further enhancement, the Zero Forcing pre-compensation and the space-time coding for further CDL mitigation. All the simulation results are validated analytically by deriving the error probability upper bounds

APA, Harvard, Vancouver, ISO, and other styles

23

Salah, Adham M. S. "Investigation of Integrated Decoupling Methods for MIMO Antenna Systems. Design, Modelling and Implementation of MIMO Antenna Systems for Different Spectrum Applications with High Port-to-Port Isolation Using Different Decoupling Techniques." Thesis, University of Bradford, 2019. http://hdl.handle.net/10454/18427.

Full text

Abstract:

Multiple-Input-Multiple-Output (MIMO) antenna technology refers to an antenna with multiple radiators at both transmitter and receiver ends. It is designed to increase the data rate in wireless communication systems by achieving multiple channels occupying the same bandwidth in a multipath environment. The main drawback associated with this technology is the coupling between the radiating elements. A MIMO antenna system merely acts as an antenna array if the coupling between the radiating elements is high. For this reason, strong decoupling between the radiating elements should be achieved, in order to utilize the benefits of MIMO technology. The main objectives of this thesis are to investigate and implement several printed MIMO antenna geometries with integrated decoupling approaches for WLAN, WiMAX, and 5G applications. The characteristics of MIMO antenna performance have been reported in terms of scattering parameters, envelope correlation coefficient (ECC), total active reflection coefficient (TARC), channel capacity loss (CCL), diversity gain (DG), antenna efficiency, antenna peak gain and antenna radiation patterns. Three new 2×2 MIMO array antennas are proposed, covering dual and multiple spectrum bandwidths for WLAN (2.4/5.2/5.8 GHz) and WiMAX (3.5 GHz) applications. These designs employ a combination of DGS and neutralization line methods to reduce the coupling caused by the surface current in the ground plane and between the radiating antenna elements. The minimum achieved isolation between the MIMO antennas is found to be better than 15 dB and in some bands exceeds 30 dB. The matching impedance is improved and the correlation coefficient values achieved for all three antennas are very low. In addition, the diversity gains over all spectrum bands are very close to the ideal value (DG = 10 dB). The forth proposed MIMO antenna is a compact dual-band MIMO antenna operating at WLAN bands (2.4/5.2/5.8 GHz). The antenna structure consists of two concentric double square rings radiating elements printed symmetrically. A new method is applied which combines the defected ground structure (DGS) decoupling method with five parasitic elements to reduce the coupling between the radiating antennas in the two required bands. A metamaterial-based isolation enhancement structure is investigated in the fifth proposed MIMO antenna design. This MIMO antenna consists of two dual-band arc-shaped radiating elements working in WLAN and Sub-6 GHz 5th generation (5G) bands. The antenna placement and orientation decoupling method is applied to improve the isolation in the second band while four split-ring resonators (SRRs) are added between the radiating elements to enhance the isolation in the first band. All the designs presented in this thesis have been fabricated and measured, with the simulated and measured results agreeing well in most cases. Higher Committee for Education Development in Iraq (HCED)

APA, Harvard, Vancouver, ISO, and other styles

24

German, Gus Ryan. "A Ray-Based Investigation of the Statistical Characteristics and Efficient Representation of Multi-Antenna Communication Channels." BYU ScholarsArchive, 2004. https://scholarsarchive.byu.edu/etd/145.

Full text

Abstract:

Multi-antenna communication systems are attracting research interest as a means to increase the information capacity, reliability, and spectral efficiency of wireless information transfer. Ray-tracing methods predict the behavior of wireless channels using a model of the propagation environment and are a low-cost alternative to direct measurements. We use ray tracing simulations to validate the statistical time and angle of arrival characteristics of an indoor multipath channel and compare model parameter estimates with estimates derived from channel sounding measurements. Ray tracing predicts the time and angle clustering of multipaths observed in the measurements and provides model parameter estimates which are closely correlated with measured estimates. The ray tracing parameters relating to power characteristics show more deviation from measurements than the time and angle related parameters. Our results also indicate that the description of reflective scatterers in the propagation environment is more important to the quality of the predicted statistical behavior than the description of bulk materials. We use a ray synthesis model to investigate means of efficiently representing the channel for feedback information to the transmitter as a means to increase the information capacity. Several methods of selecting the ray-model feedback information are demonstrated with results from simulated and measured channels. These results indicate that an ESPRIT algorithm coupled with ad hoc transmit/receive pairing can yield better than 90% of the ideal waterfilling capacity when adequate training-based channel estimates are available. Additionally, we investigate a covariance feedback method for providing channel feedback for increased capacity. Both the ray-based and covariance-based feedback methods yield their highest capacity improvements when the signal to noise ratio is low. This results because of the larger benefit of focusing transmit power into the most advantageous eigenmodes of the channel when fewer eigenmodes have power allocated to them by the waterfilling capacity solution. In higher signal to noise ratio cases, more eigenmodes of the channel receive power when waterfilling, and the capacity improvement from feedback information decreases relative to a uniform power allocation. In general, ray model feedback methods are preferable because the covariance feedback quickly requires higher computational effort as the array sizes increase and typically results in lower capacity for a given amount of feedback information.

APA, Harvard, Vancouver, ISO, and other styles

25

Diameh, Yousef A. "The optimization of multiple antenna broadband wireless communications. A study of propagation, space-time coding and spatial envelope correlation in Multiple Input, Multiple Output radio systems." Thesis, University of Bradford, 2013. http://hdl.handle.net/10454/6361.

Full text

Abstract:

This work concentrates on the application of diversity techniques and space time block coding for future mobile wireless communications. The initial system analysis employs a space-time coded OFDM transmitter over a multipath Rayleigh channel, and a receiver which uses a selection combining diversity technique. The performance of this combined scenario is characterised in terms of the bit error rate and throughput. A novel four element QOSTBC scheme is introduced, it is created by reforming the detection matrix of the original QOSTBC scheme, for which an orthogonal channel matrix is derived. This results in a computationally less complex linear decoding scheme as compared with the original QOSTBC. Space time coding schemes for three, four and eight transmitters were also derived using a Hadamard matrix. The practical optimization of multi-antenna networks is studied for realistic indoor and mixed propagation scenarios. The starting point is a detailed analysis of the throughput and field strength distributions for a commercial dual band 802.11n MIMO radio operating indoors in a variety of line of sight and non-line of sight scenarios. The physical model of the space is based on architectural schematics, and realistic propagation data for the construction materials. The modelling is then extended and generalized to a multi-storey indoor environment, and a large mixed site for indoor and outdoor channels based on the Bradford University campus. The implications for the physical layer are also explored through the specification of antenna envelope correlation coefficients. Initially this is for an antenna module configuration with two independent antennas in close proximity. An operational method is proposed using the scattering parameters of the system and which incorporates the intrinsic power losses of the radiating elements. The method is extended to estimate the envelope correlation coefficient for any two elements in a general (N,N) MIMO antenna array. Three examples are presented to validate this technique, and very close agreement is shown to exist between this method and the full electromagnetic analysis using the far field antenna radiation patterns.

APA, Harvard, Vancouver, ISO, and other styles

26

Ghazali, Abu Baker MHD. "Advanced controllers for building energy management systems. Advanced controllers based on traditional mathematical methods (MIMO P+I, state-space, adaptive solutions with constraints) and intelligent solutions (fuzzy logic and genetic algorithms) are investigated for humidifying, ventilating and air-conditioning applications." Thesis, University of Bradford, 1996. http://hdl.handle.net/10454/4197.

Full text

Abstract:

This thesis presents the design and implementation of control strategies for building energy management systems (BEMS). The controllers considered include the multi PI-loop controllers, state-space designs, constrained input and output MIMO adaptive controllers, fuzzy logic solutions and genetic algorithm techniques. The control performances of the designs developed using the various methods based on aspects such as regulation errors squared, energy consumptions and the settling periods are investigated for different designs. The aim of the control strategy is to regulate the room temperature and the humidity to required comfort levels. In this study the building system under study is a 3 input/ 2 output system subject to external disturbances/effects. The three inputs are heating, cooling and humidification, and the 2 outputs are room air temperature and relative humidity. The external disturbances consist of climatic effects and other stochastic influences. The study is carried out within a simulation environment using the mathematical model of the test room at Loughborough University and the designed control solutions are verified through experimental trials using the full-scale BMS facility at the University of Bradford.

APA, Harvard, Vancouver, ISO, and other styles

27

Dia'meh, Yousef Ali. "The optimization of multiple antenna broadband wireless communications : a study of propagation, space-time coding and spatial envelope correlation in Multiple Input, Multiple Output radio systems." Thesis, University of Bradford, 2013. http://hdl.handle.net/10454/6361.

Full text

Abstract:

This work concentrates on the application of diversity techniques and space time block coding for future mobile wireless communications. The initial system analysis employs a space-time coded OFDM transmitter over a multipath Rayleigh channel, and a receiver which uses a selection combining diversity technique. The performance of this combined scenario is characterised in terms of the bit error rate and throughput. A novel four element QOSTBC scheme is introduced, it is created by reforming the detection matrix of the original QOSTBC scheme, for which an orthogonal channel matrix is derived. This results in a computationally less complex linear decoding scheme as compared with the original QOSTBC. Space time coding schemes for three, four and eight transmitters were also derived using a Hadamard matrix. The practical optimization of multi-antenna networks is studied for realistic indoor and mixed propagation scenarios. The starting point is a detailed analysis of the throughput and field strength distributions for a commercial dual band 802.11n MIMO radio operating indoors in a variety of line of sight and non-line of sight scenarios. The physical model of the space is based on architectural schematics, and realistic propagation data for the construction materials. The modelling is then extended and generalized to a multi-storey indoor environment, and a large mixed site for indoor and outdoor channels based on the Bradford University campus. The implications for the physical layer are also explored through the specification of antenna envelope correlation coefficients. Initially this is for an antenna module configuration with two independent antennas in close proximity. An operational method is proposed using the scattering parameters of the system and which incorporates the intrinsic power losses of the radiating elements. The method is extended to estimate the envelope correlation coefficient for any two elements in a general (N,N) MIMO antenna array. Three examples are presented to validate this technique, and very close agreement is shown to exist between this method and the full electromagnetic analysis using the far field antenna radiation patterns.

APA, Harvard, Vancouver, ISO, and other styles

28

Shang, Lei, and lei shang@ieee org. "Modelling of Mobile Fading Channels with Fading Mitigation Techniques." RMIT University. Electrical and Computer Engineering, 2006. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20061222.113303.

Full text

Abstract:

This thesis aims to contribute to the developments of wireless communication systems. The work generally consists of three parts: the first part is a discussion on general digital communication systems, the second part focuses on wireless channel modelling and fading mitigation techniques, and in the third part we discuss the possible application of advanced digital signal processing, especially time-frequency representation and blind source separation, to wireless communication systems. The first part considers general digital communication systems which will be incorporated in later parts. Today's wireless communication system is a subbranch of a general digital communication system that employs various techniques of A/D (Analog to Digital) conversion, source coding, error correction, coding, modulation, and synchronization, signal detection in noise, channel estimation, and equalization. We study and develop the digital communication algorithms to enhance the performance of wireless communication systems. In the Second Part we focus on wireless channel modelling and fading mitigation techniques. A modified Jakes' method is developed for Rayleigh fading channels. We investigate the level-crossing rate (LCR), the average duration of fades (ADF), the probability density function (PDF), the cumulative distribution function (CDF) and the autocorrelation functions (ACF) of this model. The simulated results are verified against the analytical Clarke's channel model. We also construct frequency-selective geometrical-based hyperbolically distributed scatterers (GBHDS) for a macro-cell mobile environment with the proper statistical characteristics. The modified Clarke's model and the GBHDS model may be readily expanded to a MIMO channel model thus we study the MIMO fading channel, specifically we model the MIMO channel in the angular domain. A detailed analysis of Gauss-Markov approximation of the fading channel is also given. Two fading mitigation techniques are investigated: Orthogonal Frequency Division Multiplexing (OFDM) and spatial diversity. In the Third Part, we devote ourselves to the exciting fields of Time-Frequency Analysis and Blind Source Separation and investigate the application of these powerful Digital Signal Processing (DSP) tools to improve the performance of wireless communication systems.

APA, Harvard, Vancouver, ISO, and other styles

29

Jalboub, Mohamed K. "Investigation of the application of UPFC controllers for weak bus systems subjected to fault conditions. An investigation of the behaviour of a UPFC controller: the voltage stability and power transfer capability of the network and the effect of the position of unsymmetrical fault conditions." Thesis, University of Bradford, 2012. http://hdl.handle.net/10454/5699.

Full text

Abstract:

In order to identify the weakest bus in a power system so that the Unified Power Flow Controller could be connected, an investigation of static and dynamic voltage stability is presented. Two stability indices, static and dynamic, have been proposed in the thesis. Multi-Input Multi-Output (MIMO) analysis has been used for the dynamic stability analysis. Results based on the Western System Coordinate Council (WSCC) 3-machine, 9-bus test system and IEEE 14 bus Reliability Test System (RTS) shows that these indices detect with the degree of accuracy the weakest bus, the weakest line and the voltage stability margin in the test system before suffering from voltage collapse. Recently, Flexible Alternating Current Transmission systems (FACTs) have become significant due to the need to strengthen existing power systems. The UPFC has been identified in literature as the most comprehensive and complex FACTs equipment that has emerged for the control and optimization of power flow in AC transmission systems. Significant research has been done on the UPFC. However, the extent of UPFC capability, connected to the weakest bus in maintaining the power flows under fault conditions, not only in the line where it is installed, but also in adjacent parallel lines, remains to be studied. In the literature, it has normally been assumed the UPFC is disconnected during a fault period. In this investigation it has been shown that fault conditions can affect the UPFC significantly, even if it occurred on far buses of the power system. This forms the main contribution presented in this thesis. The impact of UPFC in minimizing the disturbances in voltages, currents and power flows under fault conditions are investigated. The WSCC 3-machine, 9-bus test system is used to investigate the effect of an unsymmetrical fault type and position on the operation of UPFC controller in accordance to the G59 protection, stability and regulation. Results show that it is necessary to disconnect the UPFC controller from the power system during unsymmetrical fault conditions. Libyan Government

APA, Harvard, Vancouver, ISO, and other styles

30

Jalboub, Mohamed. "Investigation of the application of UPFC controllers for weak bus systems subjected to fault conditions : an investigation of the behaviour of a UPFC controller : the voltage stability and power transfer capability of the network and the effect of the position of unsymmetrical fault conditions." Thesis, University of Bradford, 2012. http://hdl.handle.net/10454/5699.

Full text

Abstract:

In order to identify the weakest bus in a power system so that the Unified Power Flow Controller could be connected, an investigation of static and dynamic voltage stability is presented. Two stability indices, static and dynamic, have been proposed in the thesis. Multi-Input Multi-Output (MIMO) analysis has been used for the dynamic stability analysis. Results based on the Western System Coordinate Council (WSCC) 3-machine, 9-bus test system and IEEE 14 bus Reliability Test System (RTS) shows that these indices detect with the degree of accuracy the weakest bus, the weakest line and the voltage stability margin in the test system before suffering from voltage collapse. Recently, Flexible Alternating Current Transmission systems (FACTs) have become significant due to the need to strengthen existing power systems. The UPFC has been identified in literature as the most comprehensive and complex FACTs equipment that has emerged for the control and optimization of power flow in AC transmission systems. Significant research has been done on the UPFC. However, the extent of UPFC capability, connected to the weakest bus in maintaining the power flows under fault conditions, not only in the line where it is installed, but also in adjacent parallel lines, remains to be studied. In the literature, it has normally been assumed the UPFC is disconnected during a fault period. In this investigation it has been shown that fault conditions can affect the UPFC significantly, even if it occurred on far buses of the power system. This forms the main contribution presented in this thesis. The impact of UPFC in minimizing the disturbances in voltages, currents and power flows under fault conditions are investigated. The WSCC 3-machine, 9-bus test system is used to investigate the effect of an unsymmetrical fault type and position on the operation of UPFC controller in accordance to the G59 protection, stability and regulation. Results show that it is necessary to disconnect the UPFC controller from the power system during unsymmetrical fault conditions.

APA, Harvard, Vancouver, ISO, and other styles

31

Liu, Shuiyin. "Lattice decoding for multi-input multi-output communications." Thesis, Imperial College London, 2012. http://hdl.handle.net/10044/1/9248.

Full text

Abstract:

This thesis is concerned with decoding for wireless communications. In particular, computationally efficient lattice decoding algorithms are exploited to further improve the system performance. Based on this idea, five technical chapters are presented in this thesis. In Chapter 2, we propose novel lattice decoding based on segment Lenstra-Lenstra-Lovász (LLL) algorithm to further reduce the decoding complexity of coded Multiple-Input Multiple-Output (MIMO) cooperative channel. In particular, we extend the original segment LLL algorithm to the complex version, and prove that it can achieve the optimal diversity-multiplexing tradeoff (DMT). In Chapter 3, we present randomized lattice decoding based on Klein's sampling technique, which is a randomized version of Babai's nearest plane algorithm (i.e., successive interference cancellation). We analyze and optimize the performance of randomized lattice decoding resulting in reduced decoding complexity, and propose a very efficient implementation of random rounding. Chapter 4 is concerned with bounded distance decoding (BDD) based embedding technique. The embedding technique is used to reduce the γ-BDD problem to 1/(2γ)-unique shortest vector problem 1/(2γ)-uSVP). WE prove that the Lenstra, Lenstra and Lovász (LLL) algorithm can achieve 1/(2γ)-BDD for γ ≈ O(2n) for embedding decoding. We also prove that BDD of the regularized lattice is optimal in terms of the DMT. In Chapter 5, we present a detailed study of the soft output MIMO decoding. We show that the randomized decoding algorithm is an efficient way to compute soft output. In order to improve soft output quality, we propose variants of soft output decoding based on the sampling technique and embedding technique. Moreover, we derive a lower bound on the search radius for which list-based decoding can provide a near optimal solution to soft output. In Chapter 6, the performance limits of lattice reduction-aided precoding are investigated. The proximity factor is defined to measure the worst-case transmission power gap to sphere precoding. The second moment over precoding region is defined to measure the average-case transmission power loss. Afterward, low dimension lattice precoding is proposed to further reduce the transmission power.

APA, Harvard, Vancouver, ISO, and other styles

32

Liu, Yudan. "Decoupled Reference Governors for Multi-Input Multi-Output Systems." ScholarWorks @ UVM, 2018. https://scholarworks.uvm.edu/graddis/970.

Full text

Abstract:

In this work, a computationally efficient solution for constraint management of square multi-input multi-output (MIMO) systems is presented. The solution, referred to as the Decoupled Reference Governor (DRG), maintains the highly-attractive computational features of scalar reference governors (SRG) compared to Vector Reference Governor (VRG) and Command Governor (CG). This work focuses on square MIMO systems that already achieve the desired tracking performance. The goal of DRG is to enforce output constraints and simultaneously ensure that the degradation to tracking performance is minimal. DRG is based on decoupling the input-output dynamics of the system so that every channel of the system can be viewed as an independent input-output relationship, followed by the deployment of a bank of scalar reference governors for each decoupled channel. We present a detailed set-theoretic analysis of DRG, which highlights its main characteristics. A quantitative comparison between DRG, SRG, and the VRG is also presented in order to illustrate the computational advantages of DRG. Finally, a distillation process is introduced as an example to illustrate the applicability of DRG.

APA, Harvard, Vancouver, ISO, and other styles

33

Mhamdi, Maroua. "Méthodes de transmission d'images optimisées utilisant des techniques de communication numériques avancées pour les systèmes multi-antennes." Thesis, Poitiers, 2017. http://www.theses.fr/2017POIT2281/document.

Full text

Abstract:

Cette thèse est consacrée à l'amélioration des performances de codage/décodage de systèmes de transmission d'images fixes sur des canaux bruités et réalistes. Nous proposons, à cet effet, le développement de méthodes de transmission d'images optimisées en se focalisant sur les deux couches application et physique des réseaux sans fil. Au niveau de la couche application et afin d'assurer une bonne qualité de service, on utilise des algorithmes de compression efficaces permettant au récepteur de reconstruire l'image avec un maximum de fidélité (JPEG2000 et JPWL). Afin d'assurer une transmission sur des canaux sans fil avec un minimum de TEB à la réception, des techniques de transmission, de codage et de modulation avancées sont utilisées au niveau de la couche physique (système MIMO-OFDM, modulation adaptative, CCE, etc). Dans un premier temps, nous proposons un système de transmission robuste d'images codées JPWL intégrant un schéma de décodage conjoint source-canal basé sur des techniques de décodage à entrées pondérées. On considère, ensuite, l'optimisation d'une chaîne de transmission d'images sur un canal MIMO-OFDM sans fil réaliste. La stratégie de transmission d'images optimisée s'appuie sur des techniques de décodage à entrées pondérées et une approche d'adaptation de lien. Ainsi, le schéma de transmission proposé offre la possibilité de mettre en oeuvre conjointement de l'UEP, de l'UPA, de la modulation adaptative, du codage de source adaptatif et de décodage conjoint pour améliorer la qualité de l'image à la réception. Dans une seconde partie, nous proposons un système robuste de transmission de flux progressifs basé sur le principe de turbo décodage itératif de codes concaténés offrant une stratégie de protection inégale de données. Ainsi, l'originalité de cette étude consiste à proposer des solutions performantes d'optimisation globale d'une chaîne de communication numérique pour améliorer la qualité de transmission This work is devoted to improve the coding/ decoding performance of a transmission scheme over noisy and realistic channels. For this purpose, we propose the development of optimized image transmission methods by focusing on both application and physical layers of wireless networks. In order to ensure a better quality of services, efficient compression algorithms (JPEG2000 and JPWL) are used in terms of the application layer enabling the receiver to reconstruct the images with maximum fidelity. Furthermore, to insure a transmission on wireless channels with a minimum BER at reception, some transmission, coding and advanced modulation techniques are used in the physical layer (MIMO-OFDM system, adaptive modulation, FEC, etc). First, we propose a robust transmission system of JPWL encoded images integrating a joint source-channel decoding scheme based on soft input decoding techniques. Next, the optimization of an image transmission scheme on a realistic MIMO-OFDM channel is considered. The optimized image transmission strategy is based on soft input decoding techniques and a link adaptation approach. The proposed transmission scheme offers the possibility of jointly implementing, UEP, UPA, adaptive modulation, adaptive source coding and joint decoding strategies, in order to improve the image visual quality at the reception. Then, we propose a robust transmission system for embedded bit streams based on concatenated block coding mechanism offering an unequal error protection strategy. Thus, the novelty of this study consists in proposing efficient solutions for the global optimization of wireless communication system to improve transmission quality

APA, Harvard, Vancouver, ISO, and other styles

34

Mungara, Ratheesh Kumar. "System-level performance of interference-aware spatial frequency reuse." Doctoral thesis, Universitat Pompeu Fabra, 2016. http://hdl.handle.net/10803/400869.

Full text

Abstract:

Spatial frequency reuse is a long-established approach for enhancing the capacity of wireless systems through increased spectral efficiency (bits per second per unit bandwidth). The future 5th generation of wireless systems is expected to incorporate various forms of frequency reuse. This includes multiple-input multiple-output (MIMO) communication enabling frequency reuse across antennas, device-to-device (D2D)-based densification allowing spectrum reuse across direct communication links, and full duplexing utilizing the same spectrum for communication in the transmit and receive directions. This dissertation aims at determining the performance limits of emerging wireless systems underpinned by dense spatial frequency reuse and interference suppression, and to glean key system design insights. Stochastic geometry is the toolbox invoked to conduct the analysis, with network locations modeled as points of a Poisson process. A new framework is developed by introducing a Gaussian fit to the interference and variable degrees of spatial averaging, which enable more meaningful results and compact expressions compared to those of existing analyses. Within this framework, we first consider MIMO spatial multiplexing and interference alignment (IA). The former scheme utilizes all available spatial dimensions for signaling and the latter minimizes interference at the expense of knowing the instantaneous fading states at both transmitters and receivers and of a reduction in spatial signaling dimensions. Despite the intense work on IA and spatial multiplexing, there is limited work aimed at understanding their engineering tradeoff in the context of practically relevant cellular settings such as propagation losses, fading dynamics due to user mobility and imperfect knowledge of the fading states. We have studied this problem in depth through both system- and link-level analyses. Even under perfect knowledge of the fading, IA is seen to be beneficial over spatial multiplexing only in very specific and relatively infrequent network situations, and IA loses all its advantages at vehicular speeds when the fading knowledge is imperfect. Second, we focus on ITLinQ and FlashLinQ, the two principal channelization schemes proposed to date for controlling the interference in D2D networks. An analytical characterization of ITLinQ scheme is provided, opening the door to optimizing its controllable parameters. It is shown that both channelization schemes outperform the unchannelized baseline, with a slight edge for ITLinQ. On the most unfavorable network geometries, ITLinQ yields multiple-fold improvements in spectral efficiency with respect to an unchannelized network. Finally, we introduce full-duplex transceivers in cellular networks and characterize the impact of increased interference on their performance. It is established through analysis and complemented by simulations on a Vodafone LTE field test network that additional user-to-user interference only has a minor impact while base-to-base interference would render full-duplex operation unfeasible in dense microcellular networks without any interference management. In summary, MIMO spatial multiplexing and D2D-based densification are seen to play a vital role in improving wireless system capacity while IA and full duplexing are found to be ineffective. La reutilització de la freqüència espacial és l’aproximació més acceptada per tal de millorar la capacitat dels sistemes wireless mitjançant l'increment de l'eficiència espectral (bits per segon per unitat d'ample de banda). S'espera que la futura cinquena generació de sistemes wireless incorpori diverses formes de reutilització de freqüència. Això inclou la comunicació multi-input multi-output (MIMO) que permet la reutilització a través d'antenes, densificació dispositiu-a-dispositiu (D2D) que permet reutilitzar l'espectre a través d’enllaços de comunicació directa, així com un full-dúplex emprant el mateix espectre per a la comunicació en la transmissió i recepció de direccions. Aquest treball pretén determinar els límits de rendiment dels sistemes wireless emergents, basats en una densa reutilització de la freqüència espacial i en la supressió d'interferències, així com espigolar coneixement clau per al disseny de sistemes d'aquest tipus. La geometria estocàstica és l'eina que s'aplicarà a l'anàlisi que es durà a terme, modelitzant les localitzacions dins la xarxa com a punts d'un procés de Poisson. La introducció d'un ajust Gaussià a la interferència, conjuntament amb la consideració de nivells variables d'expectació espacial, han permès definir un nou marc matemàtic que fa possible unes expressions més compactes i uns resultats més significatius en comparació amb els anàlisis existents. Dins d'aquest marc, en primer lloc es prenen en consideració la multiplexació MIMO i l'aliniament d'interferència (IA, en les seves sigles en anglès). El primer esquema empra totes les dimensions espacials disponibles per a la senyalització i el segon minimitza la interferència a costa de conèixer els estats de esvaïment instantani dels transmissors i receptors, i d'una reducció en les dimensions de senyalització espacial. Malgrat l'intens treball en l'IA i la multiplexació espacial, s'ha prestat escassa atenció a tractar de comprendre el seu balanç d’enginyeria en el context d'xarxes cel.lulars de rellevància pràctica, com els de propagació de pèrdues, o les dinàmiques de esvaïment degudes a la mobilitat de l'usuari i al coneixement imperfecte dels estats de esvaïment. En aquest treball s'ha estudiat en profunditat aquest problema a través d'anàlisis tant a nivell dels enllaços com del sistema. Fins i tot en condicions de coneixement perfecte del esvaïment, l'IA resulta beneficiós sobre la multiplexació només en situacions de xarxa molt específiques i relativament infreqüents, mentre que perd tots els seus avantatges a velocitats vehiculars quan el coneixement del esvaïment és imperfecte. En segon lloc, el treball es centra en el ITLinQ i el FlashLinQ, els dos principals esquemes de canalització proposats fins al moment per controlar la interferència en xarxes D2D. S'ofereix una caracterització analítica de l'esquema ITLinQ, obrint així la porta a l'optimització dels seus paràmetres controlables. Es mostra que tots dos esquemes de canalització aconsegueixen millors resultats que l'esquema no canalitzat, amb un lleuger avantatge per al ITLinQ. Considerant la geometria de xarxa més desfavorable, el ITLinQ produeix millores múltiples en l'eficiència espectral en comparació amb la xarxa no canalitzada. Finalment, el treball introdueix els transreceptors full-dúplex en xarxes cel.lulars i caracteritza l'impacte de la interferència incrementada en el seu funcionament. A través d'anàlisis i de simulacions complementàries en una xarxa de test de Vodafone LTE, s'estableix que la interferència d'usuari a usuari té un impacte poc significatiu mentre que la interferència de base a base faria inviable l'operació full-dúplex en xarxes microcell.lulars sense gestió de les interferències. En resum, aquest tesis doctoral aporta evidència de que el multiplexat MIMO i la densificació basada en D2D juguen un paper vital en la millora de la capacitat dels sistemes wireless mentre que el IA i el full-dúplex resulten inefectius.

APA, Harvard, Vancouver, ISO, and other styles

35

Doğanata, Zinnur Vaidyanathan P. P. "General structural representations for multi-input multi-output discrete-time FIR and IIR lossless systems /." Diss., Pasadena, Calif. : California Institute of Technology, 1990. http://resolver.caltech.edu/CaltechETD:etd-02222007-083438.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Alzgool, Mais. "Design and analysis of a novel multi-input multi-output high voltage DC transformer model." Thesis, University of the West of England, Bristol, 2019. http://eprints.uwe.ac.uk/37653/.

Full text

Abstract:

A novel Multi-Input Multi-Output (MIMO) step-up DC transformer for applications in high voltage renewable energy sources is designed and presented. This design topology can provide a high step-up conversion gain without using an internal AC transformer, to supply different DC output voltage levels from integration of various input power sources. MIMO DC transformers provide flexibility in terms of choice and availability of the power source, reduction in the number of power lines used to transfer power to pre-specified locations as well as enhancement in system reliability. The comprehensive operating principle, theoretical analysis and design criteria of the proposed MIMO step-up DC transformer have been discussed. The proposed DC transformer has the advantages of simple configuration, fewer components, high conversion gain and high efficiency. The relations between the inputs and outputs are expressed mathematically in terms of passive components and the duty cycle of power switches. Also discussed is the sizing of the employed inductors and the capacitors for a particular application. The derived input and output expressions for ideal and non-ideal DC transformer are solved numerically and the results are validated against those obtained through MATLAB-SIMULINK simulation. Tentative analysis of the numerical and simulation results shows a close correlation.

APA, Harvard, Vancouver, ISO, and other styles

37

Crowder, Douglas Cale. "Reinforcement Learning for Control of a Multi-Input, Multi-Output Model of the Human Arm." Case Western Reserve University School of Graduate Studies / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=case162513783500859.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zhang, Haoquan S. M. Massachusetts Institute of Technology. "An integrated multi-input single-output buck converter for laterally-arrayed multi-bandgap solar cells." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/121745.

Full text

Abstract:

Thesis: S.M., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2019 Cataloged from PDF version of thesis. Includes bibliographical references (pages 151-156). Concentrated Photovoltaic (CPV) systems provides a potentially low-cost and high-efficiency alternative to conventional mono-crystalline Si panel PV systems, and a new CPV system with Laterally-Arrayed Multi-Bandgap (LAMB) cells is introduced. In this thesis, an IC-based Multi-Input Single-Output (MISO) power converter, which serves as the small-footprint and self-powered power management module of the CPV system, is designed and tested. The proposed converter shall efficiently harvest energy from 4 types of solar cells and track the Maximum Power Point (MPP) at the cell-block level. First, the circuit topology, MPP Tracking (MPPT) algorithm, and control mechanism are verified with discrete converters, then a qualitative demonstration is conducted outdoors to show the concept of the entire CPV system with power management. Finally, a first-generation integrated converter, with the passive components, Analog/Digital converters and a MPPT-enabling micro-controller off-chip, is implemented. by Haoquan Zhang. S.M. S.M. Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science

APA, Harvard, Vancouver, ISO, and other styles

39

Luh, Guan-Chun. "Identification of an internal combustion engine model by nonlinear multi-input multi-output system identification /." The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487853913100998.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Chu, Tzyy-Wen. "Eigenstructure analysis of automobile steering dynamics with application to robust four wheel steering control." Thesis, University of Warwick, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.246817.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Yu, Kai. "Modeling of Multiple-Input Multiple-Output Radio Propagation Channels." Licentiate thesis, KTH, Signals, Sensors and Systems, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1478.

Full text

Abstract:

In recent years, multiple-input multiple-output (MIMO)systems appear to be very promising since they can provide highdata rates in environments with sucient scattering byexploiting the spatial domain. To design a real MIMO wirelesssystem and predict its performance under certain circumstances,it is necessary to have accurate MIMO wireless channel modelsfor dierent scenarios. This thesis presents dierent models forindoor MIMO radio propagation channels based on 5.2 GHz indoorMIMO channel measurements.The recent research on MIMO radio channel modeling isbriey reviewed in this thesis. The models are categorized intonon-physical and physical models. The non-physical modelsprimarily rely on the statistical characteristics of MIMOchannels obtained from the measured data while the physicalmodels describe the MIMO channel (or its distribution) via somephysical parameters. The relationships between dierent modelsare also discussed.For the narrowband case, a non line-of-sight (NLOS)indoor MIMO channel model is presented. The model is based on aKronecker structure of the channel covariance matrix and thefact that the channel is complex Gaussian. It is extended tothe line-of-sight (LOS) scenario by estimating and modeling thedominant component separately.As for the wideband case, two NLOS MIMO channel modelsare proposed. The rst model uses the power delay prole and theKronecker structure of the second order moments of each channeltap to model the wideband MIMO channel while the second modelcombines a simple single-input single-output (SISO) model withthe same Kronecker structure of the second order moments.Monte-Carlo simulations are used to generate indoor MIMOchannel realizations according to the above models. The resultsare compared with the measured data and good agreement has beenobserved.

APA, Harvard, Vancouver, ISO, and other styles

42

Kanday, Balaji Madapuci. "Microcontroller Based Multiple-Input Multiple-Output Transmitter." International Foundation for Telemetering, 2010. http://hdl.handle.net/10150/605952.

Full text

Abstract:

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California This paper describes how a microcontroller based system can be used to generate the signals needed in a multiple-input multiple-output (MIMO) system transmitter. The limited computational speed of the microcontroller, along with other tasks which the controller may need to handle, places limits on the throughput of the system, and the complexity of the MIMO signal design. However this can be a low cost design, and the microcontroller can be used to perform other operations in the system, which may make it attractive in some applications.

APA, Harvard, Vancouver, ISO, and other styles

43

Wu, Ye. "Iterative frequency-domain channel equalisation and estimation for single-carrier multi-input multi-output wireless communication systems." Thesis, University of Liverpool, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.494078.

Full text

Abstract:

In the forthcoming broadband wireless communications, channel equalisation and estimation solutions are required to be robust against frequency selective fading channels and have a low signal processing complexity. This thesis investigates iterative frequency-domain channel equalisation and estimation for single-carrier (SC) multi-input multi-output (MIMO) wireless communication systems, aiming to outperform iterative time-domain channel equalisation and estimation with a low complexity.

APA, Harvard, Vancouver, ISO, and other styles

44

Zhang, Yi. "Learning with Limited Supervision by Input and Output Coding." Research Showcase @ CMU, 2012. http://repository.cmu.edu/dissertations/156.

Full text

Abstract:

In many real-world applications of supervised learning, only a limited number of labeled examples are available because the cost of obtaining high-quality examples is high. Even with a relatively large number of labeled examples, the learning problem may still suffer from limited supervision as the complexity of the prediction function increases. Therefore, learning with limited supervision presents a major challenge to machine learning. With the goal of supervision reduction, this thesis studies the representation, discovery and incorporation of extra input and output information in learning. Information about the input space can be encoded by regularization. We first design a semi-supervised learning method for text classification that encodes the correlation of words inferred from seemingly irrelevant unlabeled text. We then propose a multi-task learning framework with a matrix-normal penalty, which compactly encodes the covariance structure of the joint input space of multiple tasks. To capture structure information that is more general than covariance and correlation, we study a class of regularization penalties on model compressibility. Then we design the projection penalty, which encodes the structure information from a dimension reduction while controlling the risk of information loss. Information about the output space can be exploited by error correcting output codes. Using the composite likelihood view, we propose an improved pairwise coding for multi-label classification, which encodes pairwise label density (as opposed to label comparisons) and decodes using variational methods. We then investigate problemdependent codes, where the encoding is learned from data instead of being predefined. We first propose a multi-label output code using canonical correlation analysis, where predictability of the code is optimized. We then argue that both discriminability and predictability are critical for output coding, and propose a max-margin formulation that promotes both discriminative and predictable codes. We empirically study our methods in a wide spectrum of applications, including document categorization, landmine detection, face recognition, brain signal classification, handwritten digit recognition, house price forecasting, music emotion prediction, medical decision, email analysis, gene function classification, outdoor scene recognition, and so forth. In all these applications, our proposed methods for encoding input and output information lead to significantly improved prediction performance.

APA, Harvard, Vancouver, ISO, and other styles

45

Dambul, Katrina D. "Multiple-input multiple-output (MIMO) in optical wireless communications." Thesis, University of Oxford, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.558676.

Full text

Abstract:

There is growing demand for indoor wireless communication systems with higher bandwidth and higher data rates. However, the crowded radio frequency (RF) spectrum has caused researchers to consider optical wireless systems. In this thesis, optical signals in the visible region of the spectrum are used. White LEDs are used as transmitters as they provide higher signal-to-noise (SNR) levels and a better link budget than the infrared alternative. Typical modulation bandwidths for white LEDs are limited to tens of MHz. Thus, multiple-input multiple-output (MIMO) transmission is considered as a means to increase data rate. The development of the indoor optical wireless MIMO system begins with the geometrical and mathematical analysis of a single-input single-output (SISO) system and a single-input multiple- output (SIMO) system. The same analysis is then performed for a MIMO system. For the MIMO system, an experimental demonstration using white LEDs and non-imaging receivers are reported. Results include coverage measurements and an SNR analysis. There are limitations using non- imaging receivers, such as coverage limitations and symmetry problems, which cause problem with signal recovery. To improve these limitations, imaging receivers are considered. The design and development of an experimental demonstration of an indoor optical wireless MIMO system with an imaging receiver is presented. The experimental setup consists of a transmitter with a 2 x 2 array of white LEDs and a receiver with a 3 x 3 photo detector array. The system transmits data at a bit rate of 2Mbit/s/channel. Detailed design specifications and optical design are presented. Results show that certain positions within the system coverage area have error-free operation. The BER and SNR analysis shows that the overall BER improves with the overall SNR. In order to exploit the full potential of the system, future work should focus on improving the SNR and BER of the system.

APA, Harvard, Vancouver, ISO, and other styles

46

Gupte, Abhishek. "SOQPSK Signals in Multiple Input Multiple Output (MIMO) Systems." International Foundation for Telemetering, 2010. http://hdl.handle.net/10150/605954.

Full text

Abstract:

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California This paper investigates the use of shaped offset quadrature phase shift keying (SOQPSK) signals in multiple-input multiple-output (MIMO) communication systems. The goal is to integrate commonly used receiver architectures for conventional single-input single-output (SISO) systems into a corresponding MIMO system. The benefits of improved spectral efficiency are juxtaposed against the increased receiver complexity. Bit error rate performances for the SISO and MIMO architectures in a multipath environment are compared and conclusions regarding trade-offs between signal to noise ratio (SNR) and spectral efficiency stated.

APA, Harvard, Vancouver, ISO, and other styles

47

Stewart, Kyle Bradley. "Waveform-Diverse Multiple-Input Multiple-Output Radar Imaging Measurements." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1450437383.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Wu, Hui-Nan, and 吳惠南. "MIMO (Multi Input Multi Output) in Next Generation of Mobile Communications." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/6amwke.

Full text

Abstract:

碩士 元智大學 通訊工程學系 105 Multi-antenna technologies such as beamforming and Multiple-Input, Multiple-Output (MIMO) are anticipated to play a key role in next generation mobile communications system, which are expected to be deployed in the year 2020 and beyond. The MIMO (Multiple-Input Multiple-Output) technologies have directionality, improve spectral efficiency and high network capacity. In this paper, we discuss MIMO architectures where the types of transmit MIMO, processing and applications. We will focus on the principles and applications for MIMO. Multiple-input multiple-output (MIMO) technology uses multiple antennas at the both link ends and does not need to increase additional transmit power and spectrum, leading to promising link capacity gains of several-fold increase in spectrum efficiency. MIMO technology has been adopted in IEEE 802.16 standard and also has been applied in IEEE 802.11. It is normally though that the spatial correlations reduce the capacity of MIMO system, but in fact, with correlation matrices available, a transmitter can apply the stochastic power allocation and the antenna selection. Stochastic power allocation is applied on these selected antennas instead to all to get maximum capacity and accelerate the antenna selection process. MIMO technology will play an important role in the 4G wireless system. The early studies of MIMO system are mostly based on the ideal channel model that the elements of channel matrix are independently and identically distributed complex Gaussian random variables, but the real MIMO channels may have spatial correlation. Moreover, using MIMO systems will lead to the increase of system cost and complexity, which constrains the development of MIMO technology, however, the fast antenna selection scheme based on correlation matrix can efficiently reduce the complexity of MIMO system.

APA, Harvard, Vancouver, ISO, and other styles

49

Huang, Chi-Hsiung, and 黃啟雄. "A Multi-Input Multi-Output(MIMO) Antenna with Wave-Traps Design." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/89714290716603868662.

Full text

Abstract:

碩士 樹德科技大學 電腦與通訊系碩士班 102 This paper presents a kind of Wave-trap multiple-input multiple-output antenna. The main structure is fed into a large metal sheet, with an element coupled to ground, and then placed in mirror-symmetrical manner to the upper region of the substrate to form a 2 × 2 antenna configuration. This antenna design is simple, the area occupy narrow and can excite WLAN operating band mode for radiator. Because added the wave suppression components coupling element, which results not only improves the impedance characteristics of the antenna, and in required frequency band isolation but also has good results. Prove that antenna structure plays a role in suppressing the interference of energy. This design can really be applied to wireless local area network （WLAN）of the communications on the system.

APA, Harvard, Vancouver, ISO, and other styles

50

Njue, Danson Gitonga. "A game theoretic power allocation scheme for multi-user multi input multi output (MIMO) system." Thesis, 2010. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1000336.

Full text

Abstract:

M. Tech. Electrical Engineering. In the recent past, there has been an increase in demand for high data rate services and system designers are always looking for ways to improve the capacity and quality of service (QoS) of wireless communication networks. The main objective of the study is to propose an asynchronous power allocation scheme based on the classical waterfilling algorithms in a multi-user MIMO uplink system. The proposed algorithm is fully distributed and eliminates the need for user synchronization during power allocation. Each user in the system competes with one another in choosing the capacity maximizing transmit power while treating the multi-user interference as noise. The problem is reduced to finding the optimal transmit covariance matrix of the users that maximizes the sum capacity of the system. We formulate the power allocation problem as a non-cooperative game and show the existence and uniqueness of the Nash Equilibrium (NE) point. The proposed Semi-Asynchronous MIMO Waterfilling algorithm maximizes the system sum capacity without the need for synchronization among users when updating their power allocation.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'MIMO (Multi-Input and Multi-Output)'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles