Relevant bibliographies by topics / Mineral loading

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Mineral loading'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mineral loading.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mineral loading"

1

Zhang, Jianyong, Zhendong Cui, Weige Han, Kai Si, and Yan Zhao. "Comparative Study on Mineral-Scale Microcrack Propagation of Shale under Different Loading Methods." Advances in Civil Engineering 2021 (January 28, 2021): 1–18. http://dx.doi.org/10.1155/2021/6621347.

Full text
Abstract:
Producing a sufficient volume of multiscale crack networks is key to enhancing recovery of shale gas. The formation of crack network largely depends on initiation and propagation of microcracks. To reveal the influence of different loading methods on the propagation of mineral-scale microcracks, this study used the Voronoi tessellation technique to establish a cohesive zone model of shale mineral distribution and applied six different boundary conditions to represent different loading methods. Crack path characteristics, rupture characteristics, continuous crack propagation and turning, and en
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Pradeep, Yuvraj Singh Negi, and Surendra Pal Singh. "Filler loading in the lumen or/and cell wall of fibers – A literature review." BioResources 6, no. 3 (2011): 3526–46. http://dx.doi.org/10.15376/biores.6.3.3526-3546.

Full text
Abstract:
A review of the literature reveals potential advantages that papermakers can achieve by placing minerals in the lumens or cell walls of fibers before the pulp is formed into paper. Loading of filler into the fiber lumen by mechanical deposition or within the cell wall by in-situ precipitation has been reported to generally result in a moderate reduction in light scattering coefficient and increased strength properties of laboratory handsheets, as well as in paper manufactured with pilot plant equipment, when compared to conventional addition of filler. However, there are some exceptions to thi
APA, Harvard, Vancouver, ISO, and other styles
3

Schweizer, Steffen A., Carsten W. Mueller, Carmen Höschen, Pavel Ivanov, and Ingrid Kögel-Knabner. "The role of clay content and mineral surface area for soil organic carbon storage in an arable toposequence." Biogeochemistry 156, no. 3 (2021): 401–20. http://dx.doi.org/10.1007/s10533-021-00850-3.

Full text
Abstract:
AbstractCorrelations between organic carbon (OC) and fine mineral particles corroborate the important role of the abundance of soil minerals with reactive surfaces to bind and increase the persistence of organic matter (OM). The storage of OM broadly consists of particulate and mineral-associated forms. Correlative studies on the impact of fine mineral soil particles on OM storage mostly combined data from differing sites potentially confounded by other environmental factors. Here, we analyzed OM storage in a soil clay content gradient of 5–37% with similar farm management and mineral composit
APA, Harvard, Vancouver, ISO, and other styles
4

Abu Fara, Ammar, Mark R. Rayson, Geoff F. Brent, Timothy K. Oliver, Michael Stockenhuber, and Eric M. Kennedy. "Direct Aqueous Carbonation of Heat-Activated Lizardite; Effect of Particle Size and Solids Loading on Magnesite Yield." Minerals 15, no. 2 (2025): 155. https://doi.org/10.3390/min15020155.

Full text
Abstract:
In this study, we investigated the effect of particle size and solids loading on the magnesite yield in the direct aqueous mineral carbonation of heat-activated lizardite. Experimentation was conducted under single-step reaction conditions (130 bar partial pressure of carbon dioxide (CO2) and 150 °C, with 0.64 M sodium bicarbonate (NaHCO3) and 15 wt% solids) as developed by the Albany Research Center (ARC). The objective of the study was to enhance the understanding of the direct aqueous mineral carbonation process in heat-activated lizardite. Furthermore, we aimed to shed light on how variati
APA, Harvard, Vancouver, ISO, and other styles
5

Cullen, D. M., R. T. Smith, and M. P. Akhter. "Time course for bone formation with long-term external mechanical loading." Journal of Applied Physiology 88, no. 6 (2000): 1943–48. http://dx.doi.org/10.1152/jappl.2000.88.6.1943.

Full text
Abstract:
Increased mechanical loading of bone with the rat tibia four-point bending device stimulates bone formation on periosteal and endocortical surfaces. With long-term loading cell activity diminishes, and it has been reported that early gains in bone size may reverse. This study examined the time course for bone cellular and structural response after 6, 12, and 18 wk of loading at 1,200–1,700 microstrain (με). Bone formation rates, measured by histomorphometry, were compared within groups, between loaded and contralateral nonloaded tibiae, and between weeks. Formation surface, mineral apposition
APA, Harvard, Vancouver, ISO, and other styles
6

Sanwlani, Nivedita, and Reshmi Das. "Understanding Haze: Modeling Size-Resolved Mineral Aerosol from Satellite Remote Sensing." Remote Sensing 14, no. 3 (2022): 761. http://dx.doi.org/10.3390/rs14030761.

Full text
Abstract:
Mineral dust aerosols are composed of a complex mixture of silicates, carbonates, oxides, and sulfates. The minerals’ chemical composition and size distribution are vital parameters to evaluate dust environmental impacts. However, the quantification of minerals remains a challenge due to the sparse in situ measurements of dust samples. Here we derive the size-resolved mineralogical composition of airborne dust aerosols from MODIS (Terra and Aqua) satellite-acquired optical measurements and compare it with chemically analyzed elemental (Al, Fe, Ca, Mg) concentrations of aerosols for PM2.5 and P
APA, Harvard, Vancouver, ISO, and other styles
7

Leppänen, Olli V., Harri Sievänen, Jarkko Jokihaara, et al. "The effects of loading and estrogen on rat bone growth." Journal of Applied Physiology 108, no. 6 (2010): 1737–44. http://dx.doi.org/10.1152/japplphysiol.00989.2009.

Full text
Abstract:
This study evaluated the contributions of locomotive loading and estrogen to the development of diaphysis of rat femur. A randomized 2 × 2 study design was used. Altogether, 70 female Sprague-Dawley rats were used, of which 10 were euthanized at entry. Of the remaining rats, 16 served as controls, and the rest, 44, underwent a unilateral sciatic neurectomy. The effect of estrogen was removed by ovariectomizing one-half of the neurectomized rats. After 27 wk, the animals were euthanized, and the femora were excised. Irrespective of loading or estrogen, the femur length and mineral mass increase
APA, Harvard, Vancouver, ISO, and other styles
8

Scerpella, Tamara A., Jodi N. Dowthwaite, Nicole M. Gero, Jill A. Kanaley, and Robert J. Ploutz-Snyder. "Skeletal Benefits of Pre-Menarcheal Gymnastics Are Retained After Activity Cessation." Pediatric Exercise Science 22, no. 1 (2010): 21–33. http://dx.doi.org/10.1123/pes.22.1.21.

Full text
Abstract:
Mechanical loading during childhood and adolescence may yield skeletal benefits that persist beyond activity cessation and menarche. At 1 year pre- and 2 years post-menarche, nondominant forearm areal bone mineral density (aBMD), bone mineral content (BMC) and projected area (area) were compared in gymnasts (n = 9), ex-gymnasts (n = 8) and nongymnasts (n = 13). At both observations, gymnasts and ex-gymnasts had higher forearm aBMD, BMC and area than nongymnasts. gymnasts had higher postmenarcheal means than ex-gymnasts for all three parameters. Childhood mechanical loading yields skeletal adva
APA, Harvard, Vancouver, ISO, and other styles
9

Duan, Dong, Xiaoyu Chen, Xiaojing Feng, Xin Wang, and Jiang Sun. "Study on Failure Mechanism of Mudstone Based on Digital Core and Digital Volume Correlation Method." Applied Sciences 12, no. 15 (2022): 7933. http://dx.doi.org/10.3390/app12157933.

Full text
Abstract:
In order to study the damage evolution law and failure mechanism of mudstone under different stress states, with the help of high-resolution CT scanning equipment, in situ CT scanning experiments of mudstone under uniaxial compression were carried out. Combined with digital core technology and the digital volume image correlation method, the 3D characterization of meso-structure and the evolution process of localized damage in mudstone were analyzed. The research shows that brittle minerals such as quartz in mudstone often exist in the form of agglomerated strips, resulting in the formation of
APA, Harvard, Vancouver, ISO, and other styles
10

Fu, Yu, and Zhongliang Feng. "Simulation of the Effect of Coal Microstructures on the Macroscopic Mechanical Behavior." Advances in Civil Engineering 2020 (November 26, 2020): 1–14. http://dx.doi.org/10.1155/2020/1025952.

Full text
Abstract:
This paper investigates the influence of mineral structure on macromechanical behavior of coal under different loading conditions using X-ray CT scanning experimental and numerical methods. The three-dimensional (3D) reconstruction of coal was conducted to assess the spatial distribution characteristics of the mineral structure by AVIZO software. Based on fractal box dimension (BCD) and equivalent diameter, the mineral structures were quantitatively characterized. The 3D finite element models with three distribution characteristics of minerals were built, and the model was considered as a rand
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Mineral loading"

1

Marklund, Simon. "The comparison of automatic and manual loading in an underground mining environment." Thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-64900.

Full text
Abstract:
Mine automation has been in development since the 1980s and began to be implemented in the 1990s with the biggest drivers being safety, reduced maintenance and increased productivity. Automation is used in many different mining methods performing a variety of tasks. However, very few studies have been conducted regarding the performance of automatic vehicles in real world mines, neither has much research been done when comparing automated and manual loading.   The purpose of this thesis is twofold. First it is to identify and produce metrics that can be used to compare automatic and manual loa
APA, Harvard, Vancouver, ISO, and other styles
2

Maxwell, Rhianne Morgan Le. "Modifying the Mineral Profile of Crickets (Acheta domesticus) Using a Supplemented Diet." DigitalCommons@CalPoly, 2018. https://digitalcommons.calpoly.edu/theses/1907.

Full text
Abstract:
Captive insectivores may consume invertebrates as all, or part of their overall diet. The challenge with feeding captive insectivores involves the limited number of invertebrate species that are commercially available, and the lack of key nutrients provided by these insects. Among these insects, a naturally occurring low concentration of calcium and an inverse calcium to phosphorus ratio may put insectivores at the risk of developing hypocalcemia. A strategy to correct this nutrient imbalance involves supplementing the insect diet with high concentrations of targeted nutrients – a term referre
APA, Harvard, Vancouver, ISO, and other styles
3

Meerkin, Jarrod D. "Musculo-skeletal adaptation and altered loading environments: An amputee model." Thesis, Queensland University of Technology, 2000. https://eprints.qut.edu.au/36750/1/36750_Digitised%20Thesis.pdf.

Full text
Abstract:
Amputation of the lower limb may result in musculo-skeletal changes similar to those that occur following space flight, immobilisation and prolonged bed rest. The similarities desist when one considers the invasive nature of amputation surgery and the impact that partial loss of a limb has on the loading characteristics of the affected leg. The aim of this study was to determine the musculo-skeletal changes that occur following trans-femoral and trans-tibial amputation, and to compare differences in the musculo-skeletal characteristics of these groups, which may occur as a function of the modi
APA, Harvard, Vancouver, ISO, and other styles
4

Gallagher, Sean. "Effects of torso flexion on fatigue failure of the human lumbosacral spine." Connect to this title online, 2003. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1070310033.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2003.<br>Title from first page of PDF file. Document formatted into pages; contains xvii, 238 p.; also includes graphics (some col.). Includes abstract and vita. Advisor: William S. Marras, Dept. of Industrial and Systems Engineering. Includes bibliographical references (p. 204-238).
APA, Harvard, Vancouver, ISO, and other styles
5

Spears, Bryan M. "Benthic-pelagic nutrient cycling in shallow lakes : investigating the functional role of benthic microalgae." Thesis, University of St Andrews, 2007. http://hdl.handle.net/10023/371.

Full text
Abstract:
Microbes, living on the boundary between the sediment and the water-column in lakes, can play a pivotal role in governing the magnitude and frequency of nutrient cycling. The purpose of this research was to focus on the role of benthic microalgae in regulating such processes and to identify spatial and temporal characteristics in their function. Approaches included the quantification of sediment nutrient concentrations (particularly P fractionation), estimates of equilibrium phosphate concentrations (EPC0) (resuspended and undisturbed sediment estimates), and assessment of the benthic microalg
APA, Harvard, Vancouver, ISO, and other styles
6

Яхненко, Олена Миколаївна, Елена Николаевна Яхненко та Olena Mykolaivna Yakhnenko. "Екологічно безпечна утилізація фосфогіпсу у технологіях захисту атмосферного повітря". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/52068.

Full text
Abstract:
Дисертація присвячена проблемі зниження рівня техногенного впливу на навколишнє середовище від об’єктів складування та накопичення фосфогіпсу за рахунок утилізації його як мінерального носія в технологіях захисту атмосферного повітря та розробленню відповідної технологічної схеми на принципах екологічної безпеки, що забезпечить ефективне очищення сірковмісних газових потоків та одержання екологічно чистого органо-мінерального продукту перероблення – біосірки, яку доцільно використовувати у сільському господарстві. Здійснено еколого-гігієнічне оцінювання впливу фосфогіпсових відвалів на природн
APA, Harvard, Vancouver, ISO, and other styles
7

Wheelhouse, Keith. "Fatigue damage accumulation under torsion and non-proportional push-pull interruption loading." Thesis, Sheffield Hallam University, 2002. http://shura.shu.ac.uk/20522/.

Full text
Abstract:
A new testing facility for fully reversed tension-torsion high cycle fatigue testing has been designed. The specimens used for the test programme were solid and made from a medium carbon steel. The test programme involved a tension-torsion multiaxial non-proportional loading sequence i.e. fully reversed torsion followed by a push-pull load interruption and then the continuation of the same torsion loading to failure. The push-pull load interruption represented a significantly low damage i.e. 4% damage according to Miner's linear damage theory, and was applied after different prior torsion cycl
APA, Harvard, Vancouver, ISO, and other styles
8

Coris, Rojas Uver Frank. "Optimización y confiabilidad del sistema de izaje del Loading Pocket Nv. 250 mediante la automatización del proceso en Winche Esperanza. (Minera Animon Cerro de Pasco)." Bachelor's thesis, Universidad Continental, 2017. http://repositorio.continental.edu.pe/handle/continental/3895.

Full text
Abstract:
La presente tesis titulada: “Optimización y confiabilidad del sistema de Izaje del Loading Pocket Nv. 250 mediante la automatización del proceso en Winche Esperanza. (Minera Animon Cerro de Pasco)”, trata de un sistema automatizado el cual dota de optimización y confiablidad para el proceso de Winche, que es un componente vital en el equipo de extracción de minerales (zinc y plomo básicamente) de la Minera Animon ubicada entre los límites de las regiones Junín y Pasco. Este sistema ha permitido mejorar la extracción y reducir paradas por mantenimientos.<br>Tesis
APA, Harvard, Vancouver, ISO, and other styles
9

Festugato, Lucas. "Comportamento de hidratação e resposta cisalhante cíclica de resíduo de mineração cimentado reforçado com fibras." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2011. http://hdl.handle.net/10183/35605.

Full text
Abstract:
As propriedades do solo cotidianamente podem não ser adequadas às características e às necessidades de projeto. É apresentada, como alternativa, a técnica de reforço com inclusão de elementos fibrosos à matriz de solo cimentado e não cimentado. Ainda, embora comuns, o comportamento do solo frente a solicitações cíclicas não é completamente conhecido. Nesse sentido, o estudo do comportamento de hidratação e da resposta cisalhante cíclica de um resíduo de mineração cimentado reforçado com fibras é objetivado. Para tanto, medidas de retração química, medidas de rigidez ao longo da hidratação e en
APA, Harvard, Vancouver, ISO, and other styles
10

Kathekeyan, Myuran. "Fatigue performance and design of cold-formed steel roof battens under cyclic wind uplift loads." Thesis, Queensland University of Technology, 2018. https://eprints.qut.edu.au/122471/1/Myuran_Kathekeyan_Thesis.pdf.

Full text
Abstract:
This thesis investigates the fatigue pull-through failures of steel roof batten to rafter connections and proposes suitable design equations to enhance the safety of thin steel roof battens in cyclones. Suitable design equations were developed based on both linear and nonlinear damage theories by carefully investigating the factors affecting the failure via small and full-scale experimental studies and associated numerical studies. The proposed design equations have the potential to replace the current Australian design method based on complex and time-consuming prototype cyclic tests, and als
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Mineral loading"

1

Cecala, Andrew B. Pallet loading dust control system. U.S. Bureau of Mines, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cecala, Andrew B. Pallet loading dust control system. U.S. Dept. of the Interior, Bureau of Mines, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Richard, Nicolas. Cargar y descargar en el desierto de Atacama. Ministerio de las Culturas, las Artes y el Patrimonio, Gobierno de Chile, Subdirección de Investigación, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

IEEE Power Engineering Society. Transformers Committee. and IEEE Standards Board, eds. IEEE guide for loading mineral-oil-immersed power transformers rated in excess of 100 MVA (65⁰ C winding rise). Institute of Electrical and Electronics Engineers, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Office, International Labour. Bezopasnost' truda i zdoroviia pri rabote v otkrytikh razrabotkakh: Instruktsiia MOT. MOT, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

IEEE Std C57.91-1995: IEEE Guide for Loading Mineral-Oil Immersed Transformers. Inst of Elect & Electronic, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Devey, Andy, and Juan Antonio Soler Jódar. MINES, CABLES, RAILWAYS, FOUNDRIES AND MINERAL LOADING: BÉDAR, LOS GALLARDOS, GARRUCHA, MOJÁCAR, TURRE Y VERA. Arráez editores, S.L., 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Devey, Andy, and Juan Antonio Soler Jódar. MINES, CABLES, RAILWAYS, FOUNDRIES AND MINERAL LOADING: BÉDAR, LOS GALLARDOS, GARRUCHA, MOJÁCAR, TURRE Y VERA. Arráez editores, S.L., 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines. AMPP, 2022. https://doi.org/10.5006/nace_sp0116-2022.

Full text
Abstract:
Scope This standard practice outlines a methodology to assess pipeline integrity because of the threat internal corrosion in onshore and offshore pipelines and other piping systems that normally carry multiphase fluids (gas, water, and oil) termed multiphase flow internal corrosion direct assessment (MP-ICDA). Liquid separators (drips), compressing stations, vessels, and other equipment not related to pipelines are not included in this standard. This standard applies to pipelines, and piping systems both onshore and offshore, containing carbon dioxide (CO2), hydrogen sulfide (H2S), oxygen (O2)
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Mineral loading"

1

Forwood, Mark R. "Growing a Healthy Skeleton: The Importance of Mechanical Loading." In Primer on the Metabolic Bone Diseases and Disorders of Mineral Metabolism. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118453926.ch19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stephenson, R. A., S. M. Nakiboglu, and M. A. Kelly. "Effects of Asthenosphere Melting, Regional Thermoisostasy, and Sediment Loading on the Thermomechanical Subsidence of Extensional Sedimentary Basins." In Origin and Evolution of Sedimentary Basins and Their Energy and Mineral Resources. American Geophysical Union, 2013. http://dx.doi.org/10.1029/gm048p0017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Jun, Ning Liu, Chaoyi Wang, and Yaohui Gao. "Research on the Fracture Evolution Characteristics and Mesoscopic Fracture Mechanism of Fissured Basalt Based on PFC2D." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4090-1_19.

Full text
Abstract:
AbstractThe surrounding rock of large underground engineering projects is often composed of hard rock, and defects such as mineral particles and micro-cracks in the hard rock, significantly affect the mechanical properties of the rock. To investigate the influence of micro-crack distribution on the mechanical behavior, damage evolution, and fracture mechanism of rock, a numerical simulation model of basalt with single crack was established using the particle flow code PFC2D, based on the widely distributed cryptocrystalline basalt in the Baihetan Hydropower Station. In this study, the laws of
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, B., L. Yan, X. Wang, I. Schoenmakers, G. R. Goldberg, and A. Prentice. "Seasonal Differences in Mineral Homeostasis and Bone Metabolism in Response to Oral Phosphate Loading in Older Northern Chinese Adults." In Nutritional Influences on Bone Health. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-978-7_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Simion, Sorin, Daniel Pupăzan, Angelica Călămar, Cristian Nicolescu, and Izabella Kovacs. "Mitigating Noise Pollution Level When Loading Useful Mineral Substances in CFR Wagons in Order to Increase Acoustic Comfort in Neighbouring Areas." In Springer Proceedings in Physics. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-54136-1_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Soofastaei, Ali, Elnaz Karimpour, Peter Knights, and Mehmet Kizil. "Energy-Efficient Loading and Hauling Operations." In Energy Efficiency in the Minerals Industry. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-54199-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ehrenfeld, Frank E. "ASTM International Research Report and Inter-Laboratory Study for Development and Validation of ASTM D6480-19, Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy." In Asbestos and Other Elongate Mineral Particles—New and Continuing Challenges in the 21st Century. ASTM International, 2021. http://dx.doi.org/10.1520/stp163220200056.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sandström, Rolf. "The Role of Cavitation in Creep-Fatigue Interaction." In Basic Modeling and Theory of Creep of Metallic Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49507-6_11.

Full text
Abstract:
AbstractThere are many empirical models for the development of creep and fatigue damage. The perhaps most well-known ones are Robison’s and Miner’s damage summation rules. They are based on the mechanical behavior during monotonous and cyclic loading. To improve the accuracy of the damage assessment, it is important to analyze the changes in the microstructure as well, not least the cavitation. To describe cyclic loading, special empirical models have often been used in the past, some with numerous adjustable parameters. Recently, a model for cyclic loading has been formulated that is based on
APA, Harvard, Vancouver, ISO, and other styles
9

Shaha, Sugrib K., Dwayne Toscano, and Hamid Jahed. "Microstructure Evolution of AZ31B Mg Alloy During Biaxial Fatigue Loading." In The Minerals, Metals & Materials Series. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92533-8_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Islam, M. A., J. P. Escobedo, P. J. Hazell, G. J. Appleby-Thomas, and M. Z. Quadir. "Characterization of Closed-Cell Aluminium Foams Subjected to Compressive Loading." In Characterization of Minerals, Metals, and Materials 2015. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093404.ch21.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mineral loading"

1

Kok, Jasper F., David A. Ridley, Qing Zhou, et al. "THE GLOBAL ATMOSPHERIC LOADING OF MINERAL DUST AEROSOLS." In GSA Annual Meeting in Denver, Colorado, USA - 2016. Geological Society of America, 2016. http://dx.doi.org/10.1130/abs/2016am-277557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

FIGUERÊDO, M., A. TAVARES, J. BOLAÑOS, and M. NASCIMENTO. "Influence of mineral additions in the concrete carbonation resistance." In 9th International Conference On Concrete Under Severe Conditions - Environment and Loading. MENVIA, 2019. http://dx.doi.org/10.31808/5ca6e03e5ca4f0d406ac88a9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Koťátková, Jaroslava, and Pavel Reiterman. "Response of HPC incorporating mineral additive to thermal loading." In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS (ICNAAM 2017). Author(s), 2018. http://dx.doi.org/10.1063/1.5043880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

FELTRIN, C. S., G. C. ISAIA, A. LUBECH, and R. C. A. LIMA. "Synnergic effects between mineral additions on strength and microstructure of concretes at 28 days." In 9th International Conference On Concrete Under Severe Conditions - Environment and Loading. MENVIA, 2019. http://dx.doi.org/10.31808/5ca6e03d5ca4f0d406ac88a2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tawfik, Ahmed, and Viktor Mechtcherine. "On the shear behavior of mineral-bonded composites under impact loading." In 61. Forschungskolloquium mit 9. Jahrestagung des DAfStb. TU Dresden, 2022. http://dx.doi.org/10.25368/2022.371.

Full text
Abstract:
A mechanical testing device was developed for testing the behavior of mineral-bonded composites under impact shear loading. The device is based on the well-known double shear specimen configuration and was designed to be used in a gravity split-Hopkinson tension bar (SHTB), enabling shear testing at high loading rates. In this work, results from impact shear testing performed on a normal cementitious matrix (NSM) and strain-hardening cement-based composites (SHCC) tested by means of the new device are presented and discussed. Failure behavior and fracture modes are analyzed using optical measu
APA, Harvard, Vancouver, ISO, and other styles
6

Sarov Mohan, S., and P. Preetha. "Optimization of Filler Loading of Multi-Particle Mineral Oil Nanofluid for Transformer Insulation." In 2020 IEEE 3rd International Conference on Dielectrics (ICD). IEEE, 2020. http://dx.doi.org/10.1109/icd46958.2020.9341838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Giri, Bijay, X. Neil Dong, Jon D. Almer, and Xiaodu Wang. "Shear Strain of Mineral Crystals Calculated Using Wide-Angle X-Ray Scattering (WAXS) Techniques." In ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53927.

Full text
Abstract:
The post-yield properties of bone mainly provide the estimation of its toughness and are directly related to the composition and structure of the tissue at basic building unit. Combining the recently developed synchrotron X-ray scattering techniques with a novel progressive loading scheme [1], a recent study has evinced that the internal strain of mineral and collagen phases in bone varies significantly before and after yielding of the tissue [2]. The minerals as well as collagen fibrils in bone have random and preferred orientation distribution according to the location within a body. Such or
APA, Harvard, Vancouver, ISO, and other styles
8

Sudiyanto, Anton, Akhmad Al Faradcy, Tedy Agung Cahyadi, Dwi Poetranto W.A, and Hendro Suryono. "Analysis of loading and hauling equipment requirements with a comparison of Monte Carlo simulation methods, uniform distribution, normal distribution, and exponential distribution." In 3RD INTERNATIONAL CONFERENCE ON EARTH SCIENCE, MINERAL, AND ENERGY. AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0061688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fang, Xudong, Yifeng Hong, Chao Bi, and Donggang Yao. "Vacuum Infusion for Processing Thermosetting Composites Containing High Loading Solid Fillers." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38142.

Full text
Abstract:
A new processing route for making thermosetting materials and products containing high loading solid fillers including waste solid scraps and natural mineral fillers was investigated. Traditionally, solid fillers are incorporated into thermosetting polymers by liquid-state mixing. However, due to the high viscosity in mixing, high loading above 50% by weight is difficult to achieve. The new process overcomes this hurdle by a two-step processing strategy. First, solid fillers are placed in the mold and compacted to conform to the mold shape. Next, with the mold closed, a thermosetting resin is
APA, Harvard, Vancouver, ISO, and other styles
10

Prasetyo, A. ,. C. "Depositional Environment Drive as Overpressure Generation: Study Case in “Gap” Field, North West Java Basin." In Digital Technical Conference. Indonesian Petroleum Association, 2020. http://dx.doi.org/10.29118/ipa20-sg-276.

Full text
Abstract:
Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mineral loading"

1

Thornell, Travis, Charles Weiss, Sarah Williams, et al. Magnetorheological composite materials (MRCMs) for instant and adaptable structural control. Engineer Research and Development Center (U.S.), 2020. http://dx.doi.org/10.21079/11681/38721.

Full text
Abstract:
Magnetic responsive materials can be used in a variety of applications. For structural applications, the ability to create tunable moduli from relatively soft materials with applied electromagnetic stimuli can be advantageous for light-weight protection. This study investigated magnetorheological composite materials involving carbonyl iron particles (CIP) embedded into two different systems. The first material system was a model cementitious system of CIP and kaolinite clay dispersed in mineral oil. The magnetorheological behaviors were investigated by using parallel plates with an attached ma
APA, Harvard, Vancouver, ISO, and other styles
2

Orth. L51762 Investigation of Fatigue Properties of Girth Welds with Root Imperfections Allowed. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0010233.

Full text
Abstract:
Fatigue analysis of welded components and structures according to established codes is based upon either S-N design curves or fracture mechanics principles. Fatigue damage in nominally sound joints is commonly estimated using an appropriate S-N curve in conjunction with a linear cumulative damage rule (i.e., Miner"s rule). By comparison, fracture mechanics is used to assess the growth of an imperfection during a period of cyclic loading, or to assess whether an imperfection will remain dormant under the applied cyclic loading condition. Thus, the S-N approach is used mostly during initial desi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Mineral loading' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography