Log in

Relevant bibliographies by topics / Minitab 18 / Journal articles

To see the other types of publications on this topic, follow the link: Minitab 18.

Journal articles on the topic 'Minitab 18'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Minitab 18.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Golubev, A. N., T. Sh Nguyen, A. V. Basevich, et al. "Approaches to the Development of Drugs with the Use of Modern Statistical Software Concepts and Quality-by-Design." Drug development & registration 8, no. 3 (2019): 45–48. http://dx.doi.org/10.33380/2305-2066-2019-8-3-45-48.

Full text

Abstract:

Introduction. The development of the composition of drugs is very difficult and long process. To implement it, it is currently recommended to apply a modern approach – quality through the development of Quality by design. One of the methods for introducing this approach is the use of multifactorial experiments.Aim. The aim of the work was to develop the composition and technology of effervescent tablets using the Minitab program.Materials and methods. For the study used the program Minitab (ver. 18.), Minitab LLC, USA. The program created an experiment plan and evaluated those obtained on the

APA, Harvard, Vancouver, ISO, and other styles

2

AlSarji, Ali Hussine, Shurooq Talib Al-Humairi, Riyadh Sadeq AlMukhtar, Saja Mohsen Alardhi, Mohamed Sulyman, and I. M. R. Fattah. "Response surface methodology approach for optimization of biosorption process for removal of Hg(II) ions by immobilized Algal biomass Coelastrella sp." Polish Journal of Chemical Technology 26, no. 2 (2024): 57–68. http://dx.doi.org/10.2478/pjct-2024-0019.

Full text

Abstract:

Abstract Currently, adsorption stands as a viable technique for the effective removal of pollutants such as heavy metals from water. Within this research endeavor, adapted green algae (Coelastrella sp.) have been harnessed as a sustainable and environmentally conscious adsorbent, employed in the removal of Hg(II) ions from a simulated aqueous solution via employment of an Airlift bioreactor. The analysis of the attributes of adsorbent was conducted through the utilization of Fourier transform infrared (FTIR) spectroscopy. The examination of residual concentrations of Hg(II) ions in the treated

APA, Harvard, Vancouver, ISO, and other styles

3

Wu, Zhixin, Long He, Jiarui Hou, Guo Li, and Jiale Ma. "Study on the Effects of Pasture Fiber on Thermal Properties of Slag Bricks." Materials 17, no. 15 (2024): 3704. http://dx.doi.org/10.3390/ma17153704.

Full text

Abstract:

In the context of ecological sustainability, this study focuses on the effect of variables of pasture fibers on the thermal properties of slag bricks made from a green recyclable material. This experiment uses slag as the binder, sand as the aggregate, and pasture fiber as an additive. The experimental variables include the additive content ratio of the pasture fiber, the size of the pasture fiber, and the type of pasture fiber. Significance analysis of the experimental results of the thermal performance tests is carried out using Minitab 18.1.0 software, and the optimal ratios for the thermal

APA, Harvard, Vancouver, ISO, and other styles

4

Tarigan, Pelinta, El Roy Denito, and Yoyok Cahyono. "PENGARUH PROFITABILITAS, KUALITAS AUDIT DAN LEVERAGE TERHADAP PERATAAN LABA (STUDI EMPIRIS PADA PERUSAHAAN LQ 45 YANG TERDAFTAR DI BURSA EFEK INDONESIA TAHUN 2013-2017)." SITRA 2, no. 2 (2022): 105–22. http://dx.doi.org/10.58872/si.v2i2.81.

Full text

Abstract:

Penelitian ini bertujuan untuk mengetahui secara simultan maupun parsial Pengaruh Profitabilias, Kualitas Audit, Leverage Terhadap Perataan Laba Pada Perusahaan LQ 45 yang terdaftar Di Bursa Efek Indonesia Periode 2013-2017. Dalam penelitian ini, sampel yang diambil sebanyak 18 perusahaan. Peneliti menggunakan metode penelitian kuantitatif. Teknik yang digunakan dalam pengambilan sampel yaitu purposive sampling. Jenis data yang digunakan dalam penelitian ini adalah data sekunder. Teknik pengumpulan data menggunakan laporan keuangan. Teknik analisis data yang digunakan dalam penelitian ini adal

APA, Harvard, Vancouver, ISO, and other styles

5

Gugulothu, Bhiksha, P. S. Satheesh Kumar, Bathula Srinivas, Alapati Ramakrishna, and S. Vijayakumar. "Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18." Advances in Materials Science and Engineering 2021 (November 3, 2021): 1–6. http://dx.doi.org/10.1155/2021/2079811.

Full text

Abstract:

This study explained about machining parameters of Al5086/Flyash/Sic hybrid metal matrix composites by the Taguchi technique. Al5086 reinforced in SiC (5–10 wt %) and 8% weight of flyash are retained as constants. The specimens are prepared with the help of the stir casting method. The material removal rate was examined by electrochemical machining under various parameters such as feed rate (0.15–0.30 mm/min), voltage (10–20 V), and electrolyte concentration (20–35 g/litre). Taguchi’s L16 orthogonal array was selected for design of experiments (DOEs), and 16 experimental tests were conducted t

APA, Harvard, Vancouver, ISO, and other styles

6

ZAINUDIN, RAMLAH, and SITI NURLYDIA SAZALI. "A MORPHOMETRIC ANALYSIS OF HYLARANA SIGNATA GROUP (PREVIOUSLY KNOWN AS RANA SIGNATA AND RANA PICTURATA) OF MALAYSIA." International Journal of Modern Physics: Conference Series 09 (January 2012): 199–208. http://dx.doi.org/10.1142/s2010194512005260.

Full text

Abstract:

A study on morphometrical variations of Malaysian Hylarana signata group was conducted to reveal the morphological relationships within the species group. Twenty-seven morphological characters from 18 individuals of H. signata and H. picturata were measured and recorded. The numerical data were analysed using Discriminant Function Analysis in SPSS program version 16.0 and UPGMA Cluster Analysis in Minitab program version 14.0. The results show the complexity clustering between the examined species that might be due to ancient polymorphism of the lineages or cryptic species within the group. He

APA, Harvard, Vancouver, ISO, and other styles

7

Sartika Sihotang, Jenny, Christine Wulandari, and Susni Herwanti. "Nilai Objek Wisata Air Terjun Way Lalaan Provinsi Lampung Dengan Metode Biaya Perjalanan (Travel Cost)." Jurnal Sylva Lestari 2, no. 3 (2014): 11. http://dx.doi.org/10.23960/jsl3211-18.

Full text

Abstract:

Attraction Waterfall Way Lalaan is one form of environmental services are less developed but has significant economic potential if managed properly. It is therefore necessary to study with the aim of determining the value of the waterfall attraction Way Lalaan visitor characteristics and determine the effect on travel expenses. Benefits of the research results are used as consideration in future management of this attraction. The study was conducted in March-April 2013 with as many as 96 respondents with direct interviews with travel costs were proxied visitors. Determination results of visito

APA, Harvard, Vancouver, ISO, and other styles

8

Yuliatun, Simping, Zalma Attaya, and Kiki Febrianto. "Optimasi Proses Bleaching Selulosa Ampas Tebu dengan Menggunakan Metode Respon Permukaan." Indonesian Sugar Research Journal 4, no. 1 (2024): 43–55. http://dx.doi.org/10.54256/isrj.v4i1.125.

Full text

Abstract:

Ampas tebu dapat dijadikan sebagai bahan baku produksi α-selulosa. Penelitian ini bertujuan untuk mengetahui pengaruh konsentrasi NaOCl dan waktu pemanasan terhadap kandungan lignin pada sampel dengan parameter nilai bilangan kappa yang terkecil.. Rancangan percobaan yang digunakan adalah rancangan Central Composite Design (CCD) dengan 2 faktor yaitu konsentrasi NaOCl dan waktu pemanasan menggunakan fitur assistant pada aplikasi minitab 19 sehingga diperoleh 18 satuan percobaan. Data dianalisis dengan menggunakan Response Surface Method (RSM) untuk menentukan perlakuan terbaik. Hasil penelitia

APA, Harvard, Vancouver, ISO, and other styles

9

Pertiwi, Beta Cahaya, Fariz Santoso Putra, and Sintha Soraya Santi. "Penentuan Kondisi Optimum pada Pembuatan Surfaktan Natrium Lignosulfonat dari Tempurung Biji Nyamplung." ChemPro 1, no. 01 (2020): 56–62. http://dx.doi.org/10.33005/chempro.v1i01.49.

Full text

Abstract:

Sodium Lignosulfonat dapat diproduksi secara sulfonasi langsung dengan bahan baku tempurung biji buah nyamplung (Calophyllum unophyllum Linn.) menggunakan Sodium Bisulfit sebagai agen pensulfonasi. Penelitian ini dilakukan pada suhu operasi yang bervariasi 60 oC, 70 oC, 80 oC, 90 oC, 100oC serta pada pH 1,2,3,4,5. Hasil yang didapatkan kemudian dianalisa dengan menggunakan Spektrofotometri UV-VIS. Hasil analisa yang kemudian dioptimisasi dengan menggunakan metode Respon Permukaan. Kadar terbesar yang dihasilkan dari penelitian ini berada pada suhu 100 oC dan pH 5 dengan konsentrasi sebesar 9,1

APA, Harvard, Vancouver, ISO, and other styles

10

AYDIN, Erman. "Taguchi Optimizasyon Metodunun İmalat Mühendisliği Alanında Kullanımı: Minitab Örneği." Uludağ University Journal of The Faculty of Engineering 28, no. 3 (2023): 1049–68. http://dx.doi.org/10.17482/uumfd.1314990.

Full text

Abstract:

Bu çalışmada, bir çok mühendislik alanında toplam kalite yönetimi kapsamında kullanılmakta olan Taguchi optimizasyon metodu, deney tasarımı ve ANOVA’nın imalat mühendisliği alanında kullanımı üzerinde durulmuştur. İmalat süreçlerinde (tornalama, frezeleme, delme vb.) kullanılan kesme hızı (V_C), ilerleme değeri (f), kesme derinliği (a), kesici takım uç açıları, farklı kesici takım profilleri, kesici takım kaplama türleri ve diğer birçok faktör imalat aşamasında doğru saptanması gereken önemli faktörlerdir. Bu faktörlerin seviyelerinin doğru tayin edilmesi, hem zaman hem de maliyet açısından bü

APA, Harvard, Vancouver, ISO, and other styles

11

Pratiwi, Nanda, Diana Ross Arief, Herry Suseno, and Adam Dio Zaidan Dhuha. "OPTIMIZATION OF CYCLE TIME AND REDUCTION OF TAILED ON TOP DEFECTS IN BOTTLE CAPS USING TAGUCHI METHOD." Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit 23, no. 2 (2024): 313–23. https://doi.org/10.58533/ka6e2a97.

Full text

Abstract:

The purpose of this study is to determine the optimal cycle time and reduced defects of tailed on top in bottle cap products. Defects of tailed on top are defects in the form of residual plastic material that hardens at the top of the bottle cap where the material enters when injected. The method used in this final project was to conduct an experimental design using orthogonal array by varying the influential parameters and ANOVA calculation. Furthermore, this paper also calculated the Taguchi method by using Minitab 18 software. The result show that the optimal condition is combination parame

APA, Harvard, Vancouver, ISO, and other styles

12

Yohana, Pelinta, and Siti Mutmainah. "PENGARUH BOOK TAX DIFFERENCES, VOLATILITAS PENJUALAN, DAN LEVERAGE TERHADAP PERSISTENSI LABA (Studi Empiris Pada Perusahaan Yang Terdaftar Di Indeks LQ-45 Bursa Efek Indonesia Periode 2013 – 2017)." SITRA 1, no. 1 (2019): 22–35. http://dx.doi.org/10.58872/si.v1i1.35.

Full text

Abstract:

Persistensi merupakan salah satu alat ukur kualitas laba yang ditunjukkan dengan adanya kesinambungan laba. Penelitian ini bertujuan untuk mengetahui bagaimana pengaruh book tax differences, volatilitas penjualan, danleverage terhadap persistensi laba. Pada penelitian ini, populasi yang dipilih adalah perusahaan yang terdaftar di Indeks LQ-45 BEI tahun 2013-2017. Metode penentuan sampel yang digunakan adalah metode purposive sampling. Setelah melakukan seleksi maka terpilih sampel 6 perusahaan dengan total sampel 30. Metode analisis yang digunakan dalam penelitian ini adalah metode regre

APA, Harvard, Vancouver, ISO, and other styles

13

Br Bangun, Rita Herawaty. "PENERAPAN AUTOREGRESSIVE INTEGRATED MOVING AVERAGE (ARIMA) PADA PERAMALAN PRODUKSI KEDELAI DI SUMATERA UTARA." JURNAL AGRICA 9, no. 2 (2017): 90. http://dx.doi.org/10.31289/agrica.v9i2.484.

Full text

Abstract:

<p>Kajian ini bertujuan untuk meramalkan produksi kedelai di Sumatera Utara tahun 2016-2019. Metode yang digunakan dalam penelitian ini adalah Metode <em>Autoregressive Integrated Moving Average</em> (ARIMA). Data deret waktu (<em>time series</em>) yang digunakan pada kajian ini adalah data produksi kedelai Provinsi Sumatera Utara tahun 2005-2015. Penggunaan model ARIMA dalam peramalan produksi kedelai Sumatera Utara menggunakan tiga tahapan analisis yaitu, pertama adalah identifikasi struktur model; kedua, estimasi dan kalibrasi model, dan terakhir adalah penguji

APA, Harvard, Vancouver, ISO, and other styles

14

Darsin, Mahros, Timotius Pasang, and Zhan Chen. "Forces Perspective of Drillability of Titanium Alloy 6Al-2Sn-4Zr-6Mo." Journal of Energy, Mechanical, Material and Manufacturing Engineering 3, no. 1 (2018): 23. http://dx.doi.org/10.22219/jemmme.v3i1.5825.

Full text

Abstract:

This paper concerns on drillability of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) from the point view of thrust force (Fz) & torque (Mz) using a TiAlN CVD coated carbide tool. The condition of the material was varied with three different heat treatments. Whereas, the machining parameters were varied in cutting speed, feed rate and cooling application method. Taguchi method L-18 was employed to design the experiments. Both type of forces, thrust force and torque, were measured using a Kistler dynamometer, and the data were analyzed using a Minitab 17 software. The thrust force was influenced by the cutti

APA, Harvard, Vancouver, ISO, and other styles

15

Aziz, Noor Firas, Samer Hussein-Al-Ali, Mowafaq Mohammed Ghareeb, and Nashwan Abdallah Nashwan. "The use of chitosan as an effective carrier of theophylline - an anti-asthmatic drug." Polimery 68, no. 3 (2023): 157–68. http://dx.doi.org/10.14314/polimery.2023.3.4.

Full text

Abstract:

In order to solve the problem of frequent drug dosing and increase its effectiveness, theophylline (THP) was deposited on chitosan nanoparticles (CSNPs). THP-CSNPs nanocomposites with the composition of 50, 75, 100 or 150 mg of chitosan (CS) and 25, 50, 75, 100 or 200 mg of tripolyphosphate (TPP) at pH 4.0, 5.0, 6.0 and 6.5 were prepared, and a constant weight of THP of 100 mg. The nanocomposites were characterized by X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared spectroscopy (FTIR). The rate of drug release was also tested. The

APA, Harvard, Vancouver, ISO, and other styles

16

الأحمر, شهوب محمد, يوسف محمد عزو, منال خليفة حسن, وهيبة سالم الجيلاني та مبروكة الصادق كشلاف. "دراسة مدى تأثير العسل والقرفة في تحفيز عملية التجذير لبعض النباتات ومقارنتها بهرمون التجذير Toniplant الصناعي تونيبلانت". Journal of Pure & Applied Sciences 20, № 1 (2021): 55–60. http://dx.doi.org/10.51984/jopas.v20i1.990.

Full text

Abstract:

اُستخدمت في هذه الدراسة بدائل طبيعية لهرمون التجذير الصناعي التونيبلانت (Toniplant ) وهي العسل (Honey) والقرفة (Cinnamon powder) لمعاملة مجموعة من النباتات المختلفة عن طريق الإكثار بالعُقَلِ في التربة الرملية وتربة البيتموس من أجل تحفيز تكوين الجذور، لما لهذه البدائل من طبيعة هرمونية؛ حيث تبين أنه باستخدام العسل ومسحوق القرفة يمكن تجذير بعض النباتات في مواسم غير مواسمها التكاثرية، حيث استغرقت هذه التجربة ثلاثة أشهر منذ 18/6/2018 وحتى 20/9/2019 وذلك بحديقة كلية العلوم/ جامعة غريان، وأكدت نتائج هذه الدراسة بعد تحليلها إحصائيّا باستخدام البرنامج الإحصائيّ Minitab 16.2.0)) أنّ البدائل (العسل والقر

APA, Harvard, Vancouver, ISO, and other styles

17

Elinwa, Augustine Uchechukwu, and Johnson Olomi Olakunle. "Characteristics of Rice Husk-Admixed Conplast SP 430 Concrete." Journal of Building Material Science 5, no. 2 (2023): 1–14. http://dx.doi.org/10.30564/jbms.v5i2.5664.

Full text

Abstract:

An experimental work was mounted using 5.7 ml of the Conplast SP430 admixture and rice husk ash (RHA) at replacement levels of 0 to 50 % at 10 % intervals by wt. % of cement. It is on the performance of Conplast SP 430 admixture and its effects on concrete and concrete with rice husk ash (RHA). Concrete specimens were cast and cured for 3 to 90 days and subjected to slump and mechanical characteristics tests. Data generated from the experiments were analyzed and sensitivity analysis of the concrete mix was determined using the Minitab 18 Statistical Package. The results showed that CP with con

APA, Harvard, Vancouver, ISO, and other styles

18

Maniar, Vaibhav, and Pinank Patel. "OPTIMIZING SHRINKAGE DEFECTS IN GREY CAST IRON BUTTERFLY VALVE CASTING: A SIMULATION AND EXPERIMENT-BASED APPROACH." Suranaree Journal of Science and Technology 30, no. 6 (2024): 030157(1–14). http://dx.doi.org/10.55766/sujst-2023-06-e01681.

Full text

Abstract:

The study focused on addressing casting defects in green sand casting that have negatively impacted the quality of the butterfly valve body. By employing various methods such as observation, interviews, numerical experimentation, and simulation, the researchers aimed to develop and evaluate a sand-casting technique for the butterfly valve body. Solidworks software was used to model the component and its gating system, while ProCAST software enabled mold filling and solidification analyses. The goal was to minimize shrinkage porosities in the cast butterfly valve body by optimizing process para

APA, Harvard, Vancouver, ISO, and other styles

19

Hikma, Nurul, Asril Burhan, Megawati Megawati, Nurhayati Ulfah, and Akbar Awaluddin. "Analisis Profil Metabolit Ekstrak Etanol Daun Temelekar (Coptosapelta tomentosa Valeton ex K.Heyne) dengan Metode Spektroskopi FT-IR yang Dikombinasi dengan Kemometrik." PHARMACY: Jurnal Farmasi Indonesia (Pharmaceutical Journal of Indonesia) 20, no. 2 (2023): 137. https://doi.org/10.30595/pharmacy.v0i0.12628.

Full text

Abstract:

Daun temelekar (Coptosapelta tomentosa Valeton ex K.Heyne) telah dimanfaatkan dalam pengobatan antiinflamasi, malaria, keputihan dan diare. Pemanfaatan daun temelekar ini dikarenakan kandungan metabolit sekunder seperti antrakuinon, flavonoid, saponin, tanin, dan terpenoid. Namun kualitas dan kuantitas yang terkandung dalamnya bergantung pada iklim dan letak geografis dari lokasi tumbuhnya. Tujuan dari penelitian ini adalah untuk mengetahui perbedaan senyawa metabolit aktif ekstrak etanol daun Temelekar dari berbagai lokasi menggunakan metode spestroskopi FT-IR dan kemometrik. Analisis profil

APA, Harvard, Vancouver, ISO, and other styles

20

Istiar, Tri Joko Wahyu Adi, Sutikno, Rahmat, Martheana Kencanawati, and Ilham Siara. "The effect of laterite stone as filler on marshall stability hot mix asphalt AC-WC." MATEC Web of Conferences 258 (2019): 01003. http://dx.doi.org/10.1051/matecconf/201925801003.

Full text

Abstract:

The highway is the main transportation infrastructure in Indonesia. Most of the highway pavement construction in Indonesia is flexible pavement. The filler commonly used in hot mixture asphalt is Portland Cement. Along with the issue of sustainable development and utilization of local materials, fillers are often replaced with cheaper and easily available materials. One material that can be used as a filler, cheaper and easily available is Laterite. The experiment was proposed to find out whether laterite could be used as filler material on Asphalt Concrete Wearing Course (AC-WC). The method a

APA, Harvard, Vancouver, ISO, and other styles

21

Carrasco-Venegas, Luis Américo, Elsa Vásquez-Alvarez, José Vulfrano González-Fernández, et al. "Profile of the Effectiveness Factor under Optimal Operating Conditions for the Conversion of Ortho-Xylene to Phthalic Anhydride in a Fixed-Bed Tubular Reactor." ChemEngineering 8, no. 2 (2024): 35. http://dx.doi.org/10.3390/chemengineering8020035.

Full text

Abstract:

The objective of this research is to find the effectiveness factor of the catalyst particles for the most favorable conditions of the phthalic anhydride production in a fixed bed reactor, with the aim of achieving the highest rate of phthalic anhydride production compared to other secondary products and analyzing the areas of lower effectiveness for the modification of the reactor design. Initially, the material and the energy balances in the catalytic bed are solved to obtain the concentration and temperature profiles based on the radius and length of the reactor, using polymath software(Poly

APA, Harvard, Vancouver, ISO, and other styles

22

Uchechukwu, Elinwa, Augustine, Mohammed, Abdulrahaman Shehu, and Mohammed, Ahmed Bafeto. "Effects of the Addition of Sawdust Ash and Iron Ore Tailings on the Characteristics of Clay Soil." Journal of Building Material Science 3, no. 2 (2021): 27. http://dx.doi.org/10.30564/jbms.v3i2.3732.

Full text

Abstract:

An evaluation of the effects of additives and firing temperatures on clay bricks characteristics was studied. The two (2) additives used were sawdust ash (SDA) and iron ore tailing wastes (IOTW), and the five (5) firing temperatures of 400o C to 1200o C at intervals of 200o C were applied. The fired bricks were tested for linear shrinkage, water absorption, density, and compressive strength. The results of the investigations showed that firing temperature improved the clay brick characteristics across all replacement levels. However, the SDA additions increased the linear shrinkage and the wat

APA, Harvard, Vancouver, ISO, and other styles

23

Brito Valladão Maciel, Daniele, Mauro Leonardo Salvador Caldeira dos Santos, Norma Valeria Dantas de Oliveira, Patricia Dos Santos Claro Fuly, Alessandra Conceição Leite Funchal Camacho, and Flavia Halasz Coutinho. "Perfil sociodemográfico de pacientes com estomia definitiva por câncer colorretal: Interferência na qualidade de vida." Nursing (São Paulo) 22, no. 258 (2019): 3325–30. http://dx.doi.org/10.36489/nursing.2019v22i258p3325-3330.

Full text

Abstract:

Objetivo: Este estudo teve como objetivo descrever o perfil sociodemográfico de pessoas com estomias definitivas acometidas pelo câncer colorretal de um município do Rio de Janeiro e associá-lo à qualidade de vida. Método: Trata-se de um estudo descritivo, transversal, com abordagem quantitativa, realizado no período de janeiro a abril de 2018, no Pólo de Ostomizados I do Município de Itaboraí. Os dados foram coletados mediante questionário estruturado e a análise dos dados foi realizada com o software Minitab versão 18. Resultados: De 83 pessoas cadastradas, somente 35 participaram. Identific

APA, Harvard, Vancouver, ISO, and other styles

24

Nur, Mokhamad, Nafisa Dwi Tanita, and Suprayogi Suprayogi. "OPTIMASI SUHU DAN LAMA WAKTU STEAM BLANCHING UNTUK PEMBUATAN JAGUNG MANIS PIPIL BEKU VARIETAS PARAGON." Jurnal Pangan dan Agroindustri 11, no. 1 (2023): 44–52. http://dx.doi.org/10.21776/ub.jpa.2023.011.01.6.

Full text

Abstract:

Jagung merupakan komoditas yang mudah rusak dalam keadaan segar. Salah satu metode yang dapat memperpanjang umur simpan sekaligus menjaga kualitasnya yaitu dengan mengolahnya menjadi jagung manis pipil beku. Dalam pembuatan jagung manis pipil diberikan perlakuan blanching metode steam karena dapat menghentikan reaksi enzimatis, mengurangi jumlah mikroba awal, menjaga tekstur bahan, dan menghilangkan komponen yang tidak diinginkan. Tujuan penelitian ini yaitu mendapatkan nilai optimal dari waktu dan suhu blanching untuk respon kadar air, total gula dan warna. Riset ini menggunakan metode RSM (R

APA, Harvard, Vancouver, ISO, and other styles

25

Inpunyo, Chawalit, Phanphong Kongphan, Sirichai Torsakul, et al. "Effect of Melting Temperature and Flux on Slag Percentage in Die Casting Process of Zamak3 Alloy." Key Engineering Materials 946 (May 25, 2023): 15–22. http://dx.doi.org/10.4028/p-e13lt7.

Full text

Abstract:

This research aims to identify the optimal condition of the zinc Zamak3 alloys' melting process using 2k full factorial design and its optimizer in Minitab 18 software. The evaluation results of the ANOVA test with a first-order model revealed that the change in both independent variables simultaneously resulted in a statistically significant alteration of the percentage of slag. The independent parameters also had an effect individually on the response. Additionally, the slag percentage reduction was increased significantly due to an elevation of the temperature. However, the change of flux t

APA, Harvard, Vancouver, ISO, and other styles

26

Sukkee, Matee, Surat Wannasri, Suthiwat Waewdee, and Phanphong Kongphan. "Ag Powder Production Using Wire Arc Spray Technique." Key Engineering Materials 946 (May 25, 2023): 35–45. http://dx.doi.org/10.4028/p-wvy76m.

Full text

Abstract:

The purpose of this research is to identify the optimal condition of the wire arc spray technique equipped with the gas atomization system using central composite design (CCD) of response surface methodology (RSM) in Minitab 18 software. Two independent parameters of the wire arc spray technique were studied, including arc voltage and air pressure. The statistical evaluations showed that both arc voltage and air pressure parameters had effects on the quality of the powder in terms of particle morphology and particle size distribution. Additionally, the arc voltage had the highest effect on par

APA, Harvard, Vancouver, ISO, and other styles

27

Yohana, Lim Sil Yan, and Thoriq Kurniawan. "PENGARUH GOOD CORPORATE GOVERNANCE DAN CORPORATE SOCIAL RESPONSIBILITY TERHADAP KINERJA KEUANGAN PERUSAHAAN (Studi Empiris pada Perusahaan Otomotif yang ada di BEI Tahun 2012– 2017)." SITRA 2, no. 1 (2022): 1–14. http://dx.doi.org/10.58872/si.v2i1.72.

Full text

Abstract:

Tujuan dari penelitian ini adalah untuk menguji pengaruh Good Corporate Governance dan Corporate Social Responsibility terhadap Kinerja Keuangan Perusahaan, populasi yang diambil adalah seluruh perusahaan otomotif di BEI untuk laporan keuangan tahun 2012 – 2017 dengan program Statistik Minitab 18. Variabel independen yang digunakan adalah Kepemilikan Manajerial, Ukuran Komisaris Independen, Ukuran Dewan Direksi, dan CSR. Variabel dependen yang digunakan adalah Kinerja Keuangan Perusahaan yang diukur dengan Return on Equity. Hasil penelitian menunjukkan bahwa terdapat pengaruh yang signifikan s

APA, Harvard, Vancouver, ISO, and other styles

28

Wijayanti, Erik, and Khafidz Rosydi. "PERAMALAN PERMINTAAN DENGAN PENDEKATAN TIME SERIES DAN PERENCANAAN PRODUKSI AGREGAT." JKIE (Journal Knowledge Industrial Engineering) 6, no. 2 (2019): 75–80. https://doi.org/10.35891/jkie.v6i2.2057.

Full text

Abstract:

The problem being faced is the product demand that is not constant, so that production planning becomes difficult. The result is often the difference between the amount of demand and product inventory. The company must find an effective and efficient production planning strategy in meeting fluctuating demands. This research is conducted demand forecasting with the help of Minitab software 18. The best forecasting results are then used as production targets. Aggregate production planning is implemented using hybrid and transportation methods to meet predicted demand by adjusting existing resour

APA, Harvard, Vancouver, ISO, and other styles

29

Ed-Idoko, J. O., C. O. Ujah, and O. N. Christiana. "Morphometric Characterization and Fillet Yield of Two Commercial Fish Species from Panyam Fish Farm Plateau State." Asian Journal of Fisheries and Aquatic Research 26, no. 11 (2024): 156–63. http://dx.doi.org/10.9734/ajfar/2024/v26i11838.

Full text

Abstract:

A total of 50 individual samples of Parachanna obscura and Clarias gariepinus were collected fresh from Panyam fish farm with the aid of crush ice for preservation until assessment was carried out to determine the fillet yield of Parachanna obscura in comparism with Clarias gariepinus. The whole fresh fish samples were taken to the department of Fisheries and Aquaculture laboratory of the Federal University, of Agriculture, Makurdi for assessment. Their Total and Standard Lengths were recorded (in cm) using a Measuring Rule, while Total Body Weights were recorded (in grams) using an electronic

APA, Harvard, Vancouver, ISO, and other styles

30

Keerthana, J. "Experimental Investigation of the Influence of Sand and Binder Composition on the Mold Properties of Alkyd Type No-Bake Chemically Bonded Sand-Casting System." Asian Review of Mechanical Engineering 11, no. 1 (2022): 1–9. http://dx.doi.org/10.51983/arme-2022.11.1.3244.

Full text

Abstract:

In comparison to green sand moulds, chemically bonded resin sand moulds have better dimensional accuracy, surface quality, and sand mould qualities. To survive sand drops when pouring molten metal, the mould cavity formed using a chemically bonded sand mould technique must have appropriate permeability, strength, and hardness. The desire for better permeability, strength, and mould hardness is based on a thorough investigation and analysis of the affecting parameters, such as resin percentage, hardener, and catalyst. The influence of binder content on the moulding qualities of silica sand boun

APA, Harvard, Vancouver, ISO, and other styles

31

Spirchez, Gneorghe Cosmin, Aurel Lunguleasa, and Valentina Doina Ciobanu. "Evaluation of Oak-Specific Consumption, Efficiency, and Losses from an Aesthetic Veneer Factory." Applied Sciences 11, no. 9 (2021): 4300. http://dx.doi.org/10.3390/app11094300.

Full text

Abstract:

The paper aimed to investigate the losses on the manufacturing flow of an aesthetic veneer factory, in order to know their value and to take measures to limit or use them efficiently. For the analysis, the oak species (Quercus robur) was taken into account, through 25 analyzed logs. Statistical investigation has used the Minitab 18 program, for a 95% confidence interval. Minimum values of losses were obtained for the sectioning-grooming operations with 0.6% and debarking with 4.9%, and the highest values were obtained when cutting veneers with 15.9% and formatting veneers with 22.8%. Based on

APA, Harvard, Vancouver, ISO, and other styles

32

Vinoth Kumar, S., R. Rekha, M. Gokula Rajan, C. Adhinathan, E. Jessinth Blesso, and B. Karthik. "Multi-Objective Optimization of Metal Removal Rate, Dimensional and Profile Accuracy during Drilling of ASTM A516 (Grade70) Steel." Key Engineering Materials 933 (October 17, 2022): 97–106. http://dx.doi.org/10.4028/p-19hm0h.

Full text

Abstract:

The aim of this research work is identification of optimum drilling parameters to increase material removal rate, dimensional and profile accuracy during drilling. ASTM A516 (Grade70) which is a boiler quality plate of 12 mm thickness was considered as the specimen for conducting the experiments. The experiment was done based on full factorial design using 18 experiments generated using Minitab Software. Two levels for tool material and three levels for feed-speed combination and cutting environment were considered. Two runs were carried out for each trial. The metal removal rate was calculate

APA, Harvard, Vancouver, ISO, and other styles

33

Bakhtiar, B., and D. Didiharyono. "Perkiraan Lonjakan Jumlah Kunjungan Wisatawan di Kabupaten Toraja Utara Tahun 2021 dengan Penerapan Metode ARIMA." Sainsmat : Jurnal Ilmiah Ilmu Pengetahuan Alam 7, no. 2 (2018): 153. http://dx.doi.org/10.35580/sainsmat7273682018.

Full text

Abstract:

Penelitian ini bertujuan untuk memperkirakan (forecasting) lonjakan jumlah wisatawan di kabupaten Toraja Utara tahun 2021 dengan penerapan model ARIMA. Metode penelitian yang digunakan adalah penelitian terapan (applied research) dengan data sekunder kuantitatif yang diperoleh di BPS Kab. Toraja Utara. Prosedur penelitian yang dilakukan meliputi identifikasi model, estimasi parameter, tahap diagnostik dan forcasting dengan bantuan soft komputer dalam hal ini Minitab 18. Berdasarkan hasil penelitian diperoleh lima model time series yang digunakan memperkirakan lonjakan jumlah wisatawan di kabup

APA, Harvard, Vancouver, ISO, and other styles

34

Alves, Lazaro Quintino, Petrus Narciso Franco, Willian Aparecido Leoti Zanetti, and Bruno César Góes. "DESEMPENHO DA PRODUÇÃO DA CULTURA DE CANA-DE-AÇÚCAR NOS PRINCIPAIS ESTADOS PRODUTORES." Revista Brasileira de Engenharia de Biossistemas 15, no. 2 (2021): 303–17. http://dx.doi.org/10.18011/bioeng2021v15n2p303-317.

Full text

Abstract:

O objetivo deste trabalho foi analisar o desempenho da área cultivada da cana-de-açúcar nos estados de São Paulo, Goiás, Minas Gerais e Mato Grosso do Sul. Os dados sobre a produção de cana foram coletados na base de dados da Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) e Companhia Nacional de Abastecimento (CONAB), medidos em mil toneladas, entre 2000 e 2020. Os dados sobre produção de açúcar e etanol foram coletados na base de dados do Instituto Brasileiro de Geografia e Estatística (IBGE), medidos em mil hectares, entre 2005 e 2020. Para as análises estatísticas e elaboração gráfic

APA, Harvard, Vancouver, ISO, and other styles

35

JEEVAMALAR, Jayaraj, Sundaresan RAMABALAN, and Jayaraj JANCIRANI. "On the Influence of Electrical Discharge Drilling Parameters and Per-formance Measures of Inconel 718 Superalloy - a Study." Mechanics 27, no. 6 (2021): 483–91. http://dx.doi.org/10.5755/j02.mech.25444.

Full text

Abstract:

In order to achieve higher productivity and product quality, the investigation of machining parameters on Electrical Discharge Drilling and surface characteristic analysis are most critical for manufacturing industries. The intention of this article is to assess the impact on performance matrices including Material Removal Rate, and Surface Roughness of input factors of peak current, pulse-on and off duration while drilling with a rotary hollow copper tool on Inconel 718 under Tungsten powder suspended kerosene. Analysis of Variance has been implemented using MINITAB release 18 software to ide

APA, Harvard, Vancouver, ISO, and other styles

36

Zakria, Mohamad Hafizi, Mohd Ghazali Mohd Nawawi, and Mohd Rizal Abdul Rahman. "Propylene Yield from Olefin Plant Utilizing Box-Cox Transformation in Regression Analysis." E3S Web of Conferences 287 (2021): 03013. http://dx.doi.org/10.1051/e3sconf/202128703013.

Full text

Abstract:

Propylene yield is one of the key operating parameters that is monitored daily in the running olefin plant. This study was conducted in the actual world-scale olefin plant to measure the impact of identified controlled variables on the propylene yield. The Box-Cox data transformation was adopted in the Regression Analysis using Minitab Software Version 18 due to non-normal data were observed after normality and stability test were conducted using Box Plot, I-MR Chart, Run Chart, Graphical Summary, and Normality Plot tools. The model concluded that propylene yield in the studied plant was contr

APA, Harvard, Vancouver, ISO, and other styles

37

Abbas, Ruqayah A., Sami A. Ajeel, Maryam A. Ali Bash, and Mohammed J. Kadhim. "Optimizing Coating Thickness of Electrophoretic Deposition Overlay on Plasma Sprayed YSZ Coating Using Taguchi Method." IOP Conference Series: Earth and Environmental Science 961, no. 1 (2022): 012060. http://dx.doi.org/10.1088/1755-1315/961/1/012060.

Full text

Abstract:

Abstract In this study, nano sized yttria stabilized zirconia (YSZ) suspension in organic solution was deposited by electrophoretic deposition (EPD) method as a protective layer on substrate that was previously plasma sprayed thermal barrier coating (TBCs). In order to improve the performance of TBC from degradation by melt ingression of fuel impurities. Design of experiments (DOE) by Taguchi method was used to optimize the controlled variables of EPD process. A crack free YSZ overlay coating was carried out at different variables; applied voltage (20, 40, 60) V, deposition time (3, 5, 7) min

APA, Harvard, Vancouver, ISO, and other styles

38

Aarya, Greeshma. "Minimizing Shrinkage Porosity by Optimizing Some Parameters of Al Alloy (6061T6) Using DOE." International Journal for Research in Applied Science and Engineering Technology 10, no. 12 (2022): 454–62. http://dx.doi.org/10.22214/ijraset.2022.39852.

Full text

Abstract:

Abstract: Response surface methodology is an efficient and powerful tool which is widely applied for casting optimization. In this research aluminum alloy wheel hub casting is done by using BOXBEHNKEN design, three level of each parameter were taken. Solid modeling of casting and gating system is done by CAD. Simulation of Aluminium Alloy (6061 T6) casting were perform in PRO-cast (2009.1) the simulation result indicates that selected parameters significantly affect the quality of casting. ANOVA is employed to examine the relationship between the factors. Input parameter namely flow rate, pour

APA, Harvard, Vancouver, ISO, and other styles

39

Irawan, Laura Alden Litha Miranda, and Suyono Suyono. "Science Literacy Support for Improving Students Argumentation Skills." Jurnal Pijar Mipa 19, no. 5 (2024): 753–57. http://dx.doi.org/10.29303/jpm.v19i5.7256.

Full text

Abstract:

This study explores the impact of science literacy on improving students' argumentation skills at SMA Negeri 21 Surabaya during the 2023/2024 academic year, within the context of the "Merdeka Belajar" initiative and 21st-century competencies. This quantitative correlational research involved 60 students from classes XI-2 and XI-10, selected using purposive sampling techniques. Based on Toulmin's argument model and the PISA science literacy framework, data was collected through science literacy tests and argumentation skill assessments. Data analysis using Minitab 18 revealed a significant posi

APA, Harvard, Vancouver, ISO, and other styles

40

Miñan-Olivos, Guillermo Segundo, Manuel Antonio Cardoza-Sernaque, and César Braulio Cisneros-Hilario. "Planificación táctica de la producción: Simulación de datos ante escenarios de incertidumbre." Revista Venezolana de Gerencia 27, Especial 8 (2022): 1213–29. http://dx.doi.org/10.52080/rvgluz.27.8.31.

Full text

Abstract:

El estudio desarrolló un modelo de simulación para su aplicación en pequeñas empresas respecto a problemas de planificación táctica de la producción en escenarios de incertidumbre. Se utilizaron herramientas informáticas como Microsoft Excel con aplicaciones VBA, SPSS 25 y Minitab 18. Los planes agregados de producción siguieron estrategias heurísticas. Se evidenció que una estrategia de nivelación representaba el menor costo de producción (295,984 dólares). La simulación de 1000 escenarios aleatorios para las ventas determinó que en el 96.1% de los casos se debería mantener la estrategia de n

APA, Harvard, Vancouver, ISO, and other styles

41

Yohana, Ingkak C, and Bela Imelda. "PENGARUH EARNING PER SHARE (EPS), DEBT TO EQUITY RATIO (DER), DAN PRICE TO BOOK VALUE (PBV) TERHADAP HARGA SAHAM (Studi Pada Perusahaan Tekstil Dan Garmen Yang Terdaftar Di Bursa Efek Indonesia Periode 2012-2017)." SITRA 1, no. 1 (2019): 1–11. http://dx.doi.org/10.58872/si.v1i1.33.

Full text

Abstract:

Penelitian ini bertujuan untuk mengetahui secara simultan maupun parsial Pengaruh Earning Per Share (EPS), Debt to Equity Ratio (DER), Price to Book Value (PBV) Terhadap Harga Saham Pada Perusahaan Tekstil Dan Garmen Yang Terdaftar Di Bursa Efek Indonesia Periode 2012-2017. Dalam penelitian ini, sampel yang diambil sebanyak 5 perusahaan. Peneliti menggunakan metode penelitian kuantitatif. Teknik yang digunakan dalam pengambilan sampel yaitu purposive sampling. Jenis data yang digunakan dalam penelitian ini adalah data sekunder. Teknik pengumpulan data menggunakan laporan keuangan. Teknik

APA, Harvard, Vancouver, ISO, and other styles

42

Cruz Romero, Marlenne, Monserrat Alvarez Aranda, Luis Daniel Martínez Urbina, and Jose Aparicio Urbano. "Método de pronóstico y multicriterio para analizar la demanda y selección de proveedores en una PYME." Ingeniería Investigación y Tecnología 24, no. 2 (2022): 1–11. http://dx.doi.org/10.22201/fi.25940732e.2023.24.2.009.

Full text

Abstract:

Este artículo presenta la aplicación de un enfoque híbrido que contempla un método de toma de decisiones multicriterio y un método de pronóstico en una PYME del Estado de México para realizar una selección de proveedores de materias primas. Se desarrolló mediante el software Minitab®18 a través un análisis de tiempos; evaluando el producto con mayor venta para un pronóstico de 15 días durante los tres principales meses donde la demanda es elevada, obteniendo como resultado el pronosticó de venta, el cual fue 54 tacos por día del tipo de taco más vendido de los cinco evaluados. Para el método E

APA, Harvard, Vancouver, ISO, and other styles

43

Al-Bayati, Alaa D. Jawad, Habaib A. Majeed Al-Taee та Ibtehaj Faisal Abdulraheem. "Determination of the Optimum Conditions for the Production of Gamma Alumina (ɤ-Al2O3) By the Precipitation Method of the Sodium Aluminate Solution". Iraqi Journal of Chemical and Petroleum Engineering 17, № 2 (2016): 79–86. http://dx.doi.org/10.31699/ijcpe.2016.2.9.

Full text

Abstract:

Design of experiments (DOE) was made by Minitab software for the study of three factors used in the precipitation process of the Sodium Aluminate solution prepared from digestion of α-Al2O3 to determine the optimum conditions to a produce Boehmite which is used in production of ɤ-Al2O3 during drying and calcination processes, the factors are; the temperature of the sodium aluminate solution, concentration of HCl acid added for the precipitation and the pH of the solution at which the precipitation was ended. The design of the experiments leads to 18 experiments. The results show that the

APA, Harvard, Vancouver, ISO, and other styles

44

Saputra, Danu, Yuni Erlina, and Betrixia Barbara. "ANALISIS TREND PRODUKSI DAN KONSUMSI JAGUNG PIPILAN DI INDONESIA." JOURNAL SOCIO ECONOMICS AGRICULTURAL 17, no. 1 (2022): 30–46. http://dx.doi.org/10.52850/jsea.v17i1.4340.

Full text

Abstract:

Penelitian ini bertujuan untuk mengetahui perkembangan trend produksi dan konsumsi jagung pipilan di Indonesia dari tahun 1993-2018 serta mengetahui estimasi trend produksi dan konsumsi jagung pipilan di Indonesia dari tahun 2019-2023. Data yang digunakan dalam penelitian adalah data sekunder yang diperoleh dari BPS Indonesia dan Pusat Data Informasi Pertanian. Hasil analisis trend produksi dan konsumsi menunjukkan produksi jagung pipilan di Indonesia dari tahun 1993-2018 diketahui produksi mengalami peningkatan dengan rata-rata pertumbuhan sebesar 6,82%, konsumsi juga mengalami peningkatan de

APA, Harvard, Vancouver, ISO, and other styles

45

Sousa, Geissy Helen de, Ana Luiza Da Silva Ribeiro, Vivian Cristian De Freitas Lima, Antônio Humberto Hamad Minervino, Alanna Do Socorro Lima da Silva, and Kedson Alessandri Lobo Neves. "Ultrassonografia testicular em touros jovens e correlação com puberdade e produção espermática." Agrarian 13, no. 49 (2020): 426–36. http://dx.doi.org/10.30612/agrarian.v13i49.10958.

Full text

Abstract:

O presente trabalho tem por objetivo avaliar a ecogenicidade do parênquima testicular de touros jovens correlacionando com puberdade precoce. O estudo foi desenvolvido com 39 tourinhos puros de origem (PO) da raça Nelore, com idade entre 12 a 18 meses. A coleta foi realizada mensalmente, onde foi registrado peso, medida da circunferência escrotal e ultrassonografia testicular. A coleta do sêmen foi realizada apenas em animais nas faixas etárias de 14, 16 e 18 meses. Os dados coletados foram organizados em planilha do programa Microsoft Office Excel 2010, para posterior analise utilizando-se o

APA, Harvard, Vancouver, ISO, and other styles

46

Adam, Sadiya Ibrahim, Idris Abdu Tela, Abdulrashid Sunusi, and Abdullahi Yusuf Asuku. "Demographic and Clinical Characteristics of Stroke Cases in Murtala Muhammed Specialist Hospital, Kano, Nigeria: A retrospective study." Dutse Journal of Pure and Applied Sciences 9, no. 2b (2023): 1–12. http://dx.doi.org/10.4314/dujopas.v9i2b.1.

Full text

Abstract:

Stroke is a cerebrovascular disease that disturbs or damages the blood supply to the brain. This study aimed to evaluate the demographic and clinical characteristics of stroke cases in Murtala Muhammed Specialist Hospital, Kano, Nigeria. Five years of records of three hundred (300) stroke patients comprised of biodata and clinical data were collected. The data were expressed as mean±SD, while simple percentage and Chi-square (χ2) tests were used to determine the incidence and association between the variables respectively using Minitab 17.0 software. The results showed an incidence of 182 (61%

APA, Harvard, Vancouver, ISO, and other styles

47

AYAKTA, DUYGU YAVUZKASAP, NAZLI ÇAĞLAR CİNPERİ, and HAKAN ÖZDEMİR. "Investigating the effect of self-cleaning treatment on the air permeability, stain removal and water repellency properties of functionalized double jacquard woven upholstery fabrics." Industria Textila 70, no. 06 (2019): 512–18. http://dx.doi.org/10.35530/it.070.06.1483.

Full text

Abstract:

Self-cleaning is the important and required function for the upholstery fabrics. At this research, which was not studied in the references, nano TiO2 coating was appliqued on 18 double faced woven fabrics produced with jacquard weaving technique with three different weft density, two different raw materials of warp yarns that are polyester and rayon, three different face weave pattern under the same conditions by using sol-gel method. All fabrics were stained with the same amount of coffee. Self-cleaning efficiency of the applied fabrics were tested at spectrophotometer by using K/S (Colour/St

APA, Harvard, Vancouver, ISO, and other styles

48

Kadafi, Muammar, and Rachmad Almi Putra. "ELECTRONIC NOSE (E-NOSE) DESIGN FOR ARDUINO NANO-BASED HALAL HARAM IDENTIFICATION." Jurnal Neutrino 13, no. 1 (2021): 8–12. http://dx.doi.org/10.18860/neu.v13i1.8903.

Full text

Abstract:

It has been successfully designed an Electronic Nose (e-Nose) instrumentation system consisting of 6 MQ gas sensors, namely, MQ2, MQ4, MQ5, MQ7, MQ9, MQ135. The E-nose system is used to identify halal-haram food. This E-Nose system uses an Arduino Nano microcontroller. The Graphic User Interface (GUI) system is built with Visual Studio 2008. Then, the data responses will be evaluated by using 2 patterns recognition methods called Principle Component Analysis (PCA). The classification results can be explained by the value of the score plot on the PCA of the data. PC1 accounts for 19% of the var

APA, Harvard, Vancouver, ISO, and other styles

49

Solórzano Zambrano, Liceth Janina, and Mario Javier Bonilla Loor. "Aceptabilidad de mortadela a base de carne de camarón blanco (litopenaeus vannamei) y carne de cerdo." Pro Sciences 3, no. 18 (2019): 24–28. http://dx.doi.org/10.29018/issn.2588-1000vol3iss18.2019pp24-28.

Full text

Abstract:

El camarón blanco (Penaeus vannamei), es una especie económicamente importante en la acuicultura ecuatoriana y, además, es una alternativa de procesamiento cárnico. El presente trabajo tuvo como finalidad desarrollar una formula a base de carne de camarón y cerdo en la elaboración de una mortadela. Se establecieron 6 tratamientos, el factor A corresponde a los tres niveles de mezcla de carnes de camarón/cerdo y el factor B con 2 niveles de % de albumina. Los tratamientos fueron evaluados sensorialmente (sabor, color, olor, y textura) mediante una prueba hedónica de 5 puntos por un panel

APA, Harvard, Vancouver, ISO, and other styles

50

Fatchurrohman, Nanang, Low Tze Chin, and Jufriadif Na’am. "TAGUCHI METHOD APPLIED FOR THE INVESTIGATION OF CORROSION LEVEL ON METAL INERT GAS WELDING OF MILD STEEL." BAREKENG: Jurnal Ilmu Matematika dan Terapan 16, no. 3 (2022): 845–52. http://dx.doi.org/10.30598/barekengvol16iss3pp845-852.

Full text

Abstract:

Mild steel has a wide range of uses such as in the construction field, automotive field, machinery industry, cookware, and pipeline. Metal Inert Gas (MIG) welding act as an assembly method of mild steel. Corrosion level is a common problem that occurs in MIG welding on mild steel. In this study, the suitable welding parameters such as voltage, number of passes, and method of welding were chosen in the experimental testing and the experimental testing was planned by using the Design of Experiment (DoE) as part of Taguchi method. The welded mild steel specimens were evaluated using a corrosion t

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!