Log in

Relevant bibliographies by topics / Minitab15 / Journal articles

To see the other types of publications on this topic, follow the link: Minitab15.

Journal articles on the topic 'Minitab15'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Minitab15.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

PYADSHINGE, GANGABAI, V.V. POTDAR, AKSHAY MALI, DEEPA GAUR, and SNEHAL JADHAV. "ANALYSIS OF ABRASIVE JET MACHINING USING TAGUCHI TECHNIQUES." IJIERT - International Journal of Innovations in Engineering Research and Technology NITET-18 (March 17, 2018): 23. https://doi.org/10.5281/zenodo.1451450.

Full text

Abstract:

<strong>Abrasive jet machining (AJM) is an advanced technique in the field of micro machining. This operation is widely utilized as a part of the industry for cutting intricate shape on hard and brittle materials that usually difficult to perform. In present experimental stud y,the effect of process variables on the material removal rate (MRR) was demonstrated by Taguchi and ANOVA Method using Minitab15 which provides an acceptable simulated result. Drilling operation of glass is done at varied jet pressure,standoff distance (SOD),nozzle inclination (NI) and nozzle tip diameter (ND) as the pro

APA, Harvard, Vancouver, ISO, and other styles

2

Shirgholami zarjo, Hasan, and Nahid Amrollahi Biuki. "Identification and Classifying of Affecting Motivation Factors in Employee Turnover by Using Topsis Method in The National Iranian Oil Products Distribution Company (N.I.O.P.D.C)." Journal of Management and Accounting Studies 3, no. 03 (2019): 1–7. http://dx.doi.org/10.24200/jmas.vol3iss03pp1-7.

Full text

Abstract:

Motivational factors involved in reduction of employee turnover were classified in Oil Refining and Distribution Company in selected cities of Iran. For this purpose, we reviewed the literature and concepts of turnover. Methodology: Primary Questionnaire was designed and Distributed in statistical population to identify the effective factors involved in reduce of turn over. Main factors determined by using Minitab15 software and Pareto charts. Reliability of Questionnaire measured by retesting method. In order to classify of the identified factors, TOPSIS method was used. Then second questionn

APA, Harvard, Vancouver, ISO, and other styles

3

Shirgholami zarjo, Hasan, and Nahid Amrollahi Biuki. "Factors affecting the company's staff turnover in the 6 provinces of Iran's oil industry." Journal of Management and Accounting Studies 3, no. 03 (2019): 8–16. http://dx.doi.org/10.24200/jmas.vol3iss03pp8-16.

Full text

Abstract:

In management literature, it is always insisted that the rate of leaving the service, is indicative of undesirable performance of management of organization in keeping and preserving the human power. Motivational factors involved in reduction of employee turnover were classified in Oil Refining and Distribution Company in selected cities of Iran. Methodology: For this purpose, we reviewed the literature and concepts of turnover. Primary Questionnaire was designed and Distributed in statistical population to identify the effective factors involved in reduce of turn over. Results: Main factors d

APA, Harvard, Vancouver, ISO, and other styles

4

Ghezlaoui, Baha Eddine, Noury Benabadji, Djamel Benmansour, and Abdessamad Merzouk. "Analyse des peuplements végétaux halophytes dans le Chott El-Gharbi (Oranie-Algérie). Vegetal halophytes plants analysis in Chott El- Gharbi (Oranie-Algeria)." Acta Botanica Malacitana 36 (December 1, 2011): 113–24. http://dx.doi.org/10.24310/abm.v36i1.2782.

Full text

Abstract:

Français. Le cortège floristique de la région sud de l’Oranie (Chott El Gharbi) est marqué par une pauvreté par rapport au nord. Cet écosystème aride se caractérise par la présence très localisée de peuplements végétaux steppiques xérophytes et halophytes souvent exposés a une dégradation irréversible. Afin de comprendre la dynamique et l’évolution de ces taxons, nous avons entamé une étude qui se base sur les variables suivantes: Sol, climat, et végétation. Les sols de cette région sont pauvres en matière organique (0.45%), de texture limono-sableuse avec une salinité élevée (2,42 mS/cm). L’é

APA, Harvard, Vancouver, ISO, and other styles

5

Mohammadkhani, Minoo, Narges Khanjani, Bahram Bakhtiari, Seyed Mehdi Tabatabai, and Khodadad Sheikhzadeh. "The Relation Between Climatic Factors and Malaria Incidence in Sistan and Baluchestan, Iran." SAGE Open 9, no. 3 (2019): 215824401986420. http://dx.doi.org/10.1177/2158244019864205.

Full text

Abstract:

Malaria is a major health problem in many tropical and subtropical countries and in the south of Iran. In this study, due to the importance of the disease in Sistan and Baluchestan province, the influence of temperature, humidity, and rainfall on malaria has been evaluated in areas with a high incidence of malaria. Malaria incidence data were inquired from the Province Health Authority, and climatic variables were inquired from the Bureau of Meteorology from 2000 to 2012 and were analyzed on a monthly basis. Changes in incidence of malaria with climatic factors were analyzed by negative binomi

APA, Harvard, Vancouver, ISO, and other styles

6

Ferraro, F. Richard. "A Test of Minitab's Pseudorandom-Number Generator." Perceptual and Motor Skills 63, no. 3 (1986): 1319–22. http://dx.doi.org/10.2466/pms.1986.63.3.1319.

Full text

Abstract:

The reliability of Minitab's pseudorandom-number generator was investigated. Minitab, an interactive statistical computer package, allows the user a variety of statistical tests and analyses. Standard tests of randomness were performed; results indicated that numbers generated by Minitab are suitably random for use in business or educational settings.

APA, Harvard, Vancouver, ISO, and other styles

7

Ghione, Lucrecia, Natalia Andrea Serrano, Patricia Noemí Goicoechea, et al. "Eosinofilia asociada a parasitosis en niños en edad escolar y adolescentes de la localidad de General Pinedo Chaco." Extensionismo, Innovación y Transferencia Tecnológica 1 (June 23, 2014): 74. http://dx.doi.org/10.30972/eitt.103030.

Full text

Abstract:

<p>En el Marco del proyecto UNNE Salud, el objetivo del presente trabajo es informar la prevalencia de las parasitosis en niños y adolescentes seleccionados y relacionar esta afección con la concentración de eosinófilos obtenidos en muestras de sangre venosa. Junto al consentimiento informado, se realizó la recolección de los datos a 197 personas de ambos sexos entre 5 y 23 años de edad pertenecientes a la localidad de general pinedo de la Provincia del Chaco, la recepción de muestras de materia fecal (seriado-técnica de concentración) y toma de muestra de sangre venosa (anticoagulada co

APA, Harvard, Vancouver, ISO, and other styles

8

Gurmukh, Singh* Gaurav Mittal Dinesh Bhadhan. "STUDY THE EFFECT OF ELONGATION IN SINGLE SIDED FRICTION STIR WELDING ON AA6063 ALUMINIUM ALLOY." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 1 (2017): 347–52. https://doi.org/10.5281/zenodo.259580.

Full text

Abstract:

In this paper, the effects of tool speed, feed rate, shoulder dia. On various mechanical properties of Aluminium alloy 6063 produced by friction stir welding have been analyzed. Friction stir welding is a technique in which the work pieces are merged by profits of frictional heating and plastic deformation certainly a temperature below the melting point of the material to be joint. AA6063 is an aluminium alloy with magnesium and silicon as the alloying element. It has generally moral mechanical properties and is heat mendable and weld able. It is similar like to aluminium alloy HE9. Experiment

APA, Harvard, Vancouver, ISO, and other styles

9

Alin, Aylin. "Minitab." Wiley Interdisciplinary Reviews: Computational Statistics 2, no. 6 (2010): 723–27. http://dx.doi.org/10.1002/wics.113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gurmukh, Singh* Gaurav Mittal Dinesh Bhadhan. "STUDY THE EFFECT OF TENSILE STRENGTH IN SINGLE SIDED FRICTION STIR WELDING ON AA6063 ALUMINIUM ALLOY." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 9 (2016): 370–75. https://doi.org/10.5281/zenodo.154208.

Full text

Abstract:

Friction stir welding is a technique in which the work pieces are joined by profits of frictional heating and plastic deformation indeed a temperature below the melting point of the material to be joint. AA6063 is an aluminium alloy with magnesium and silicon as the alloying element. It has generally good mechanical properties and is heat mendable and weld able. It is similar to aluminium alloy HE9. Experiments are showed by varying rotational speed, transverse speed and altered shoulder diameter. The Taguchi Method is used to find the combination of the three welding parameters. In this work

APA, Harvard, Vancouver, ISO, and other styles

11

Mellor, Chris, Barbara F. Ryan, Brian L. Joiner, and Thomas A. Ryan Jnr. "MINITAB Handbook." Statistician 35, no. 3 (1986): 395. http://dx.doi.org/10.2307/2987759.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

DU FEU, CHRIS. "MINITAB 14." Teaching Statistics 27, no. 1 (2005): 30–32. http://dx.doi.org/10.1111/j.1467-9639.2005.00197.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Touileb, Kamel, Abousoufiane Ouis, Rachid Djoudjou, et al. "Effects of ATIG Welding on Weld Shape, Mechanical Properties, and Corrosion Resistance of 430 Ferritic Stainless Steel Alloy." Metals 10, no. 3 (2020): 404. http://dx.doi.org/10.3390/met10030404.

Full text

Abstract:

Flux activated tungsten inert gas (ATIG) welding is a variant of tungsten inert gas (TIG) welding process with high production efficiency, high quality, low energy consumption, and low cost. The study of activating flux mechanism by increasing weld penetration has direct significance in developing flux and welding process. This study has been conducted on 430 ferritic stainless steel alloy. Design of experiment is used to get the best formulation of flux. Based on Minitab17 software, nineteen compositions of flux were prepared using the mixing method. Fluxes are combinations of three oxides (M

APA, Harvard, Vancouver, ISO, and other styles

14

Victor O., Olabode, Alogala J.A., Okon U.E., Jinaidu Haruna M., Gamde, G.G., and Jahkeng Williams E. "PHOTOCATALYTIC DEGRADATION OF REACTIVE RED DYE AND OPTIMIZATION OF THEIR EXPERIMENTAL FACTORS." Journal CleanWAS 7, no. 2 (2023): 88–94. http://dx.doi.org/10.26480/jcleanwas.02.2023.88.94.

Full text

Abstract:

Box-Behnken design of experiment for the optimization of the experimental parameters of the photocatalytic degradation of reactive red dye using dye concentration (mg/L), catalyst dosage (mg/L), pH and time of exposure as experimental factors was studied and reported. Stock solution of reactive red dye was prepared (0.00001M) and serial dilution was used to prepare twenty-seven (27) different concentration of the dye solution which were subjected to photocatalytic degradation in a photo reactor using a ultraviolent light source under ambient environmental condition. The absorbances of these so

APA, Harvard, Vancouver, ISO, and other styles

15

Ezemenike, Ikechukwu John, Harold Ugochukwu Nwosu, and Matthew Uzoma Shadrach. "Reliability Analysis for a Systems with Multiple Failure Modes and Subsystems: The Case of a Nigerian Fabrication Company." Advances in Multidisciplinary and scientific Research Journal Publication 11, no. 4 (2023): 31–46. http://dx.doi.org/10.22624/aims/digital/v11n4p3.

Full text

Abstract:

The reliability of the equipment, the working environment, the effectiveness of maintenance, the operation techniques, the technical skills of Machinist, etc. all affect how well machining equipment performs. The consequences of equipment failure become more catastrophic as the size and variety of fabrication equipment keep growing. In order to locate the system's shortcomings and identify the parts or units with low reliability for the specified designed performance, reliability analysis is necessary. This research discusses the reliability analysis of the lathe machine. Four subsystems of th

APA, Harvard, Vancouver, ISO, and other styles

16

Bassett, E. E., S. P. Brooks, and B. J. T. Morgan. "MINITAB Multivariate Macros." Applied Statistics 45, no. 2 (1996): 235. http://dx.doi.org/10.2307/2986157.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Hunt, Neville. "Minitab Release 8." Teaching Statistics 15, no. 3 (1993): 87–89. http://dx.doi.org/10.1111/j.1467-9639.1993.tb00665.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Martin, Peter, and Lyn Roberts. "Efficiency in Minitab." Teaching Statistics 18, no. 1 (1996): 26–27. http://dx.doi.org/10.1111/j.1467-9639.1996.tb00892.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Francis, J. L. "MINITAB Version 7.1." Blood Coagulation & Fibrinolysis 1, no. 3 (1990): 339. http://dx.doi.org/10.1097/00001721-199008000-00015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Currall, James. "Minitab: a retrospective?" MSOR Connections 9, no. 3 (2009): 3–5. http://dx.doi.org/10.11120/msor.2009.09030003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Wild, David J. "MINITAB Release 14." Journal of Chemical Information and Modeling 45, no. 1 (2005): 212. http://dx.doi.org/10.1021/ci040130h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Heathcote, D. J., I. Gursul, and D. J. Cleaver. "Aerodynamic Load Alleviation Using Minitabs." Journal of Aircraft 55, no. 5 (2018): 2068–77. http://dx.doi.org/10.2514/1.c034574.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Ziegel, Eric R., and James H. Albert. "Bayesian Computation Using Minitab." Technometrics 40, no. 2 (1998): 164. http://dx.doi.org/10.2307/1270667.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Johnson, Phillip E. "Elementary Statistics with Minitab." Teaching Statistics 13, no. 2 (1991): 40–42. http://dx.doi.org/10.1111/j.1467-9639.1991.tb00161.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Clewett, A. J. "The Minitab Statistical Package." Journal of the Operational Research Society 37, no. 12 (1986): 1201–2. http://dx.doi.org/10.1057/jors.1986.204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Albert, James H. "Bayesian Computation Using Minitab." Technometrics 40, no. 2 (1998): 164. http://dx.doi.org/10.1080/00401706.1998.10485215.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Borror, Connie M. "Minitab Handbook, 4th Ed." Journal of Quality Technology 33, no. 1 (2001): 122–23. http://dx.doi.org/10.1080/00224065.2001.11980058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Marriott, John M., and John C. Naylor. "Teaching Bayes on MINITAB." Applied Statistics 42, no. 1 (1993): 223. http://dx.doi.org/10.2307/2347422.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Kohak, Praveen Gowardhan, and Vivek Popat Patekar. "OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDING FOR HE-30 ALUMINIUM ALLOY-A REVIEW." JournalNX - A Multidisciplinary Peer Reviewed Journal QIPCEI2K18 (May 1, 2018): 207–11. https://doi.org/10.5281/zenodo.1412305.

Full text

Abstract:

 Friction stir welding is a solid-state joining process that uses a non-consumable tool to join two facing work pieces without melting the work piece material. This is developed in Dec.1991 by The Welding Institute of UK using for Al, Mg, Cu, Ti, work pieces that could not welded by conventional types of welding and recently develop too much in different application because of economical and quality consideration. Modern types of tool developed recently for harder typed of materials work pieces like different type of steels. https://journalnx.com/journal-article/20150608

APA, Harvard, Vancouver, ISO, and other styles

30

Kimber, Alan, and P. W. Zehna. "A Minitab Companion with Macros." Applied Statistics 42, no. 2 (1993): 413. http://dx.doi.org/10.2307/2986251.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Greenwell, Raymond N. "Using Minitab in Linear Algebra." College Mathematics Journal 16, no. 3 (1985): 216. http://dx.doi.org/10.2307/2686576.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Wasserstein, Ronald L., and Peter W. Zehna. "A MINITAB Companion with Macros." American Statistician 47, no. 2 (1993): 155. http://dx.doi.org/10.2307/2685202.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Rosenberg, Michael S. "Minitab for Windows. Release 11." Quarterly Review of Biology 72, no. 2 (1997): 240–42. http://dx.doi.org/10.1086/419856.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Arnold, Steven F. "Design of Experiments with MINITAB." American Statistician 60, no. 2 (2006): 205. http://dx.doi.org/10.1198/tas.2006.s46.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Taffe, John, and Nick Garnham. "Resampling, the Bootstrap and Minitab." Teaching Statistics 18, no. 1 (1996): 24–25. http://dx.doi.org/10.1111/j.1467-9639.1996.tb00891.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Lehman, Richard S. "Simple Multivariate Macros for Minitab." Multivariate Behavioral Research 25, no. 2 (1990): 211–18. http://dx.doi.org/10.1207/s15327906mbr2502_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Greenwell, Raymond N. "Using Minitab in Linear Algebra." College Mathematics Journal 16, no. 3 (1985): 216–18. http://dx.doi.org/10.1080/07468342.1985.11972885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Butler, Adam, Peter Rothery, and David Roy. "MINITAB MACROS FOR RESAMPLING METHODS." Teaching Statistics 25, no. 1 (2003): 22–25. http://dx.doi.org/10.1111/1467-9639.00111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Witt, Thomas. "A MINITAB Companion With Macros." Technometrics 36, no. 1 (1994): 124. http://dx.doi.org/10.1080/00401706.1994.10485424.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Bassett, E. E., S. P. Brooks, and ByronJ T. Morgan. "Minitab macros for multivariate analysis." Computational Statistics & Data Analysis 17, no. 1 (1994): 100–103. http://dx.doi.org/10.1016/0167-9473(94)90031-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Shanmugam, Ramalingam. "Applied statistical inference with Minitab." Journal of Statistical Computation and Simulation 89, no. 16 (2019): 3165–66. http://dx.doi.org/10.1080/00949655.2019.1628881.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Thomas, Hoben. "Correlational Meta-Analysis Using Minitab." Applied Psychological Measurement 14, no. 1 (1990): 82. http://dx.doi.org/10.1177/014662169001400108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Bolger, Fergus. "Software review: Minitab release 12." Journal of Behavioral Decision Making 13, no. 3 (2000): 363–64. http://dx.doi.org/10.1002/1099-0771(200007/09)13:3<363::aid-bdm355>3.0.co;2-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Bolch, Ben W., and Harry V. Roberts. "Data Analysis for Managers with MINITAB." Southern Economic Journal 56, no. 2 (1989): 537. http://dx.doi.org/10.2307/1059233.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Anderson-Cook, Christine M. "Six Sigma Quality Improvement with MINITAB." American Statistician 61, no. 2 (2007): 185. http://dx.doi.org/10.1198/tas.2007.s83.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Bailey, Mark. "Six Sigma Quality Improvement With MINITAB." Technometrics 49, no. 1 (2007): 105. http://dx.doi.org/10.1198/tech.2007.s459.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Romeu, Jorge Luis, and Vicente Gascon Gascon. "Minitab and Pizza: A Workshop Experiment." Journal of Educational Technology Systems 27, no. 2 (1998): 163–68. http://dx.doi.org/10.2190/clm0-pmng-ceww-7dcu.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Radziwill, Nicole. "Six Sigma Case Studies with Minitab." Quality Management Journal 21, no. 3 (2014): 64. http://dx.doi.org/10.1080/10686967.2014.11918400.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Neagu, Radu. "Six Sigma Quality Improvement with Minitab." Journal of Quality Technology 39, no. 1 (2007): 86–88. http://dx.doi.org/10.1080/00224065.2007.11917676.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Spiegelman, C. H. "SYSTAT 5.0 and MINITAB release 8." Chemometrics and Intelligent Laboratory Systems 12, no. 3 (1991): 299–300. http://dx.doi.org/10.1016/0169-7439(92)80008-r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!