Journal articles: 'Modèle PIC'

1

Bore, Isabelle. "Thomas More et Pic de la Mirandole: Parcours croisés." Moreana 40 (Number 153-, no. 1-2 (March 2003): 7–26. http://dx.doi.org/10.3366/more.2003.40.1-2.4.

Full text

Abstract:

Partant de la constatation que le parcours de Thomas More est, en de nombreux points, semblable à celui de Pic de la Mirandole, je cherche à determiner en quoi Pic a pu être un modèle pour More. Une brève analyse de The Life of Pico me permet en particulier de poser la question de la fidélité de More par rapport à son modèle et d’évaluer l’influence de Pic sur la carrière littéraire de More tout en montrant l’ambiguïté de leurs relations.

APA, Harvard, Vancouver, ISO, and other styles

2

Ramilison, Eloi, Axel Legouge, Michel Lucciano, Catherine Masson, and Arnaud Deveze. "Caractérisation acoustique de conduits auditifs externes normaux : de l’humain aux modèles imprimés 3D." Audiology Direct, no. 4 (2020): 5. http://dx.doi.org/10.1051/audiodir/202004005.

Full text

Abstract:

Objectif : Créer et valider un modèle de CAE normal par impression en 3D bio-fidèles aux CAE humains. Méthodologie : Nous avons prélevé dix CAE humains sur des pièces anatomiques. Après acquisition volumique sur un scanner conventionnel, la conception numérique des CAE en 3D comportait une segmentation et la mise en place d’un support tympanique. Nous avons utilisé du PLA pour l’impression et du ruban adhésif pour simuler une MT artificielle. La vélocimétrie de l’umbo a été mesurée au moyen d’un laser couplé à une chaine acoustique de stimulation-recueil dédiée. Résultats : Comparés aux CAE humains, les modèles ont montré des réponses identiques statistiquement. Un second pic était observé à 5 kHz sur le pattern des CAE imprimés. Les hautes fréquences montraient un profil plus chaotique. Conclusion : Les CAE imprimés en 3D sont des modèles valides et bio-fidèles aux CAE humains. La normalisation des amplifications observées permet d’obtenir un modèle utile pour l’optimisation des dispositifs d’amplification ou de protection auditifs.

APA, Harvard, Vancouver, ISO, and other styles

3

Chebbah, Lynda, Lakhdar Djemili, Mohammed Tawfik Bouziane, and Mohamed Chiblak. "Modélisation d'un masque en béton bitumineux (brut et protégé) sous sollicitations thermiques en régime transitoire. cas du masque de barrage Ghrib (Ain Defla, Algérie)." La Houille Blanche, no. 1 (February 2020): 42–49. http://dx.doi.org/10.1051/lhb/2019064.

Full text

Abstract:

Le masque en béton bitumineux est l'un des organes les plus utilisés pour l'étanchéité des barrages en remblai. Le parement en béton bitumineux est, en particulier dans le cas des installations de stockage par pompage hydroélectriques, sont souvent très exposé à des fluctuations importantes de température, qui sont causées par la radiation solaire, la variation du niveau d'eau dans le réservoir, par le gel dans la saison d'hiver, ainsi que la vitesse et la direction du vent, sans oublier les précipitations. Pour mieux expliquer le phénomène de transfert de chaleur, il est nécessaire de connaître les variations de température dans les différentes couches du masque en béton bitumineux. Ce travail décrit la mesure de la température dans le masque en béton bitumineux (brut et avec protection) du barrage Ghrib (Ain Defla, Algérie) et son évaluation à l'aide d'un modèle numérique du transfert de chaleur dans le parement en béton bitumineux en utilisant le logiciel Fluent. Dans un premier temps une validation du modèle par comparaison avec des mesures expérimentales, dans le cas d'une variation journalière de température ambiante, La comparaison des résultats du calcul du modèle numérique avec les mesures réelles montre une excellente ressemblance. Nous simulons ensuite la pose d'une protection thermique en ajoutons une couche convective en béton poreux. Les résultats de cette simulation montrent que le transfert de chaleur par convection possède le potentiel de développer une différence de température significative entre les parties inférieure et supérieure du masque, et aussi que l'ajout de cette couche permet d'amortir le pic de température et le réduire à 12,31 °C, ceci de 9 h jusqu'à 15 h au moment où la chaleur est très élevée, ce qui est significatif pour notre masque, où les températures atteignant leurs valeurs maximales (49 °C).

APA, Harvard, Vancouver, ISO, and other styles

4

Cree, M., M. Lalji, B. Jiang, KC Carriere, J. Beach, and A. Kamruzzaman. "Expliquer l’augmentation des taux de mésothéliome en Alberta." Maladies chroniques au Canada 29, no. 4 (December 2010): 160–69. http://dx.doi.org/10.24095/hpcdp.29.4.01f.

Full text

Abstract:

Les taux de mésothéliome sont à la hausse à l’échelle mondiale, mais les tendances en Alberta sont encore peu connues. Les auteurs de la présente étude descriptive basée sur une population se sont servis des données de 1980 à 2004 du registre de l’Alberta Cancer Board afin d’élaborer un modèle âge-période-cohorte de l’évolution dans le temps de l’incidence du mésothéliome pleural chez les hommes. Les taux d’incidence sont influencés à la fois par l’âge et par la cohorte. La cohorte des hommes nés entre 1930 et 1939 présente le risque le plus élevé, ce qui coïncide avec une utilisation répandue de l’amiante, et donc une exposition importante, à partir des années 1940 au Canada. Nous prévoyons qu’entre 1980 et 2024, 1 393 hommes albertains de 40 ans et plus mourront d’un mésothéliome pleural, dont 783 (56,2 %) entre 2010 et 2024. Une fois tous les groupes d’âge, les deux sexes et les divers sièges de la maladie pris en compte, le nombre total de décès en Alberta causés par un mésothéliome sera plus grand. Il atteindra sûrement un pic entre 2015 et 2019. En plus des efforts constants axés sur l’élimination des maladies liées à l’amiante en Alberta, l’enjeu majeur est la mise en place de systèmes de surveillance pour la prévention d’épidémies de cancers professionnels évitables en Alberta.

APA, Harvard, Vancouver, ISO, and other styles

5

Hatungumukama, G., P. L. Leroy, and J. Detilleux. "Influence des facteurs non génétiques sur la production laitière journalière des vaches Frisonnes à la station de Mahwa (sud du Burundi)." Revue d’élevage et de médecine vétérinaire des pays tropicaux 61, no. 1 (January 1, 2008): 45. http://dx.doi.org/10.19182/remvt.10011.

Full text

Abstract:

Entre 1991 et 2003, 75 650 données sur la production laitière journalière de vaches Frisonnes de la station de Mahwa ont été collectées pour étudier les effets de la durée de lactation, de l’âge au vêlage, de l’année et du mois de lactation, et de la parité sur cette production. Les données ont été analysées à l’aide d’un modèle linéaire (procédure GLM de SAS). Tous les facteurs ont influencé significativement la production laitière (P < 0,001). La moyenne générale a été de 8,71 l/jour. La production laitière a suivi la courbe théorique de lactation avec un pic de lactation de 11,48 ± 0,20 l/jour au 15e jour de lactation. L’âge au vêlage a influencé la production, avec des coefficients de régression linéaire et quadratique de –0,26 l/mois et 0,0052 l/mois² en première parité, de 0,49 l/mois et –0,0056 l/mois² en deuxième parité, et de –0,22 l/mois et 0,0013 l/mois² en troisième (et plus) parité. La production laitière a diminué au cours des années de lactation avec la chute la plus importante en 1993. Elle a atteint un minimum en 1995 avec 6,91 ± 0.17 l/jour et un maximum en 1991 avec 15,55 ± 0,45 l/jour. Elle a été significativement plus élevée en février (9,75 ± 0,13 l/jour) au milieu de la saison pluvieuse qu’en septembre (7,60 ± 0,13 l/jour) en fin de saison sèche. La moyenne des moindres carrés pour la production laitière journalière a été respectivement de 11,47 ± 0,30, 5,23 ± 0,09, et 10,11 ± 0,06 l/jour en première, deuxième et troisième (et plus) lactation.

APA, Harvard, Vancouver, ISO, and other styles

6

Burhan, Ibrahim, Ahmad Aftas Azman, and Ahmad Azlan Ab. Aziz. "Development of Programmable Integrated Circuit (PIC) Module with Multiple Outputs for Students Psychomotor Skill Enhancement." Applied Mechanics and Materials 773-774 (July 2015): 751–55. http://dx.doi.org/10.4028/www.scientific.net/amm.773-774.751.

Full text

Abstract:

Programmable Integrated Circuit (PIC) module for educational purposes is developed based on the existing unsatisfactory PIC simulation which is not able to achieve the objective and learning outcome in enhancing the student’s psychomotor aspect through circuit designing, installation and trouble shooting. The existing PIC programming through computer simulation, which students facing difficulty in observing and understanding the wiring assembly between the input module, PIC microcontroller and output modules. The development of PIC module has been designed and improved by increasing the number of output components,cost reduction and it is also user friendly. Furthermore, this PIC module is embedded with I/O module such as normally open push buttons, 12VDC motor, servomotor, LEDs light, LCD display, and seven-segment display. Newly developed PIC module can be programme and re-programme for various tasks. Based on students Lab Practical Assessment record, there is an average of 39% and 22% of improvement on knowledge and psychomotor skill respectively when students used newly developed PIC modules for laboratory practical work.

APA, Harvard, Vancouver, ISO, and other styles

7

Sangwaranatee, N., T. Wongkampha, E. Kaseam, N. W. Sangwaranatee, and W. Mekhum. "Temperature Difference of Thermoelectric Module on PIC-Microcontroller." Advanced Materials Research 979 (June 2014): 417–20. http://dx.doi.org/10.4028/www.scientific.net/amr.979.417.

Full text

Abstract:

This research is the study of electric power generated by the temperature difference below 100 °C of thermoelectric effect (cooling devices), which gets power from direct current and the electromotive force from thermoelectric module. In this research, a testing kit was designed to collect the output of temperature difference on the thermoelectric device, and compared the level of electric power of various modules in 2 different circuits; series and parallel. The result of the study showed that the higher differential temperature increased the value of electricity generation. Also, the electrical connection of thermoelectric module had an effect on power generating. When using 2 modules for each circuit, the series circuit generated more power than the parallel circuit.

APA, Harvard, Vancouver, ISO, and other styles

8

Selvakumar, K., Palanisamy R, M. Arun Noyal Doss, P. Gopi, A. Esakkipandi, L. Mathivadhanam, and T. Abul Kalam Asath. "Gesture recognition vehicle using PIC microcontroller." Indonesian Journal of Electrical Engineering and Computer Science 19, no. 1 (July 1, 2020): 66. http://dx.doi.org/10.11591/ijeecs.v19.i1.pp66-75.

Full text

Abstract:

<p>In this paper we introduce a hand controlled robotic vehicle. Hand control robotic vehicle consists of a transmitter module and a receiver module. The transmitter will be placed on a hand glove and the receiver will be placed on the motor drive along with PIC microcontroller and motor driver IC. The RF transmitter sends commands to the IC which then forwards the commands to RF receiver. The RF receiver then sends the commands to PIC microcontroller on the vehicle which processes the commands so that the vehicle moves in the specified direction. It is having proposed utility in field ofconstruction, hazardous waste disposal and field survey near borders etc. This project is developed as a travel buddy and industrial uses. Having future scope of advanced robotics that are designed and can be easily controlled using hand gesture only.</p>

APA, Harvard, Vancouver, ISO, and other styles

9

Yue, Yang, Qiang Wang, Jian Yao, Jason O’Neil, Daniel Pudvay, and Jon Anderson. "400GbE Technology Demonstration Using CFP8 Pluggable Modules." Applied Sciences 8, no. 11 (October 25, 2018): 2055. http://dx.doi.org/10.3390/app8112055.

Full text

Abstract:

In this article, we first review the current status of 400GBASE client-side optics standards and multi-source agreements (MSAs). We then compare different form factors for 400GE modules, including CFP8, OSFP and QSFP-DD. The essential techniques to implement 400GE, such as pulse amplitude modulation (PAM4), forward error correction (FEC) and a continuous time-domain linear equalizer (CTLE), are discussed. A 400GE physical interface card (PIC) in Juniper’s PTX5000 platform has been developed, conforming to the latest IEEE802.3bs standard. To validate the PIC’s performance, a commercial optical network tester (ONT) and the PIC are optically interconnected through two CFP8-LR8 modules. The CFP8-LR8 module utilizes eight optical wavelengths through coarse wavelength division multiplexing (CWDM). Each wavelength carries 50 Gb/s PAM4 signal. The signal transmits through 10 km of single mode fiber (SMF). The ONT generates framed 400GE signal and sends it to the PIC through the first CFP8 module. The PIC recovers the signal, performs an internal loopback, and sends 400GE signal back to the ONT through the second CFP8 module. The optical spectrum, eye diagram, receiver sensitivity, long time soaking results, and internal digital diagnosis monitoring (DDM) result are fully characterized. The pre-FEC bit error rate (BER) is well below the KP4 FEC threshold of 2.2 × 10−4. After KP4 FEC, error-free performance over 30 km of SMF is achieved. In this way, we demonstrate both the interoperation between the PIC and the ONT, as well as the interoperation between the two CFP8 modules. This demonstration represents the successful implementation of the 400GE interface in the core IP/MPLS router.

APA, Harvard, Vancouver, ISO, and other styles

10

Martin, Jean-François, and Gilles Desplanque. "Synthèse : l’émergence d’un modèle paroissial ?" Revue archéologique de Picardie 1, no. 1 (2011): 173–76. http://dx.doi.org/10.3406/pica.2011.3578.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

ALEXANDRE, G., G. AUMONT, J. FLEURY, J. C. MAINAUD, and T. KANDASSAMY. "Performances zootechniques de la chèvre Créole allaitante de Guadeloupe. Bilan de 20 ans dans un élevage expérimental de l’INRA." INRAE Productions Animales 10, no. 1 (February 7, 1997): 7–20. http://dx.doi.org/10.20870/productions-animales.1997.10.1.3973.

Full text

Abstract:

Dans la zone Caraïbe, les chèvres sont principalement élevées pour la viande en système allaitant. Peu de références bibliographiques portent sur la caractérisation des chèvres locales en milieu tropical. Cette étude présente une synthèse des performances zootechniques de la chèvre Créole allaitante en Guadeloupe dans un troupeau expérimental de l’INRA. Le troupeau est conduit toute l’année au pâturage de façon intensive (conduite de la reproduction, prophylaxie, fertilisation, irrigation, charge animale). Les performances de reproduction ont été analysées à partir d’une banque de données portant sur 599 femelles ayant réalisé 1904 mise bas. La première mise bas intervient à 17,2+3,1 mois et l’intervalle moyen entre mise bas est de 8,5 mois. Le taux moyen de fertilité est souvent supérieur à 90 %. La taille moyenne de la portée est de 2,1 chevreaux par mise bas. Plus de 80 % des mise bas donnent des portées d’au moins 2 chevreaux nés vivants et 95 % des mise bas n’ont jamais eu de morts nés. La taille de la portée augmente régulièrement avec le rang de mise bas jusqu’à la 5ème, de 50 % depuis la première. Les caractéristiques de la production laitière sont décrites à partir de 145 lactations estimées par la méthode ocytocine dans différents essais d’alimentation. La production laitière moyenne ajustée pour les principaux facteurs de variation est de 792+206 g/j. Les courbes de production présentent un pic de lactation précoce, en 2ème semaine de lactation, et de faible niveau : 550 et 1020 g/j pour les chèvres allaitant des simples et des doubles respectivement. Le taux butyreux moyen est de 5 %. Les performances de croissance avant sevrage ont été analysées sur 6375 chevreaux. Les données présentées sont ajustées pour les principaux facteurs de variation du modèle : le sexe, la taille de la portée, le rang de mise bas, l’année et la saison de mise bas. Le taux de mortalité moyen est de 15,7 %. Les poids à la naissance et au sevrage (réalisé à un âge moyen de 82+15 j) sont de 1,73+0,34 kg et 7,75+1,76 kg respectivement. Ils varient selon la taille de la portée et le sexe : 15 % de différence entre les simples et les multiples et 10 à 8 % de variation entre mâles et femelles. Le gain moyen quotidien entre 10 et 30 jours (GMQ10-30) et le GMQ40-70 sont de 84,3 + 25,9 et 65,7 + 24,0 g/j respectivement. Il apparaît que la chèvre Créole se classe parmi les meilleurs génotypes tropicaux à viande du fait de ses grandes capacités de reproduction, ses qualités maternelles et les niveaux de croissance présevrage observés.

APA, Harvard, Vancouver, ISO, and other styles

12

Chen, Xizi, Xiaotong Yin, Jiabei Li, Zihan Wu, Yilun Qi, Xinxin Wang, Weida Liu, and Yanhui Xu. "Structures of the human Mediator and Mediator-bound preinitiation complex." Science 372, no. 6546 (May 6, 2021): eabg0635. http://dx.doi.org/10.1126/science.abg0635.

Full text

Abstract:

The 1.3-megadalton transcription factor IID (TFIID) is required for preinitiation complex (PIC) assembly and RNA polymerase II (Pol II)–mediated transcription initiation on almost all genes. The 26-subunit Mediator stimulates transcription and cyclin-dependent kinase 7 (CDK7)–mediated phosphorylation of the Pol II C-terminal domain (CTD). We determined the structures of human Mediator in the Tail module–extended (at near-atomic resolution) and Tail-bent conformations and structures of TFIID-based PIC-Mediator (76 polypeptides, ~4.1 megadaltons) in four distinct conformations. PIC-Mediator assembly induces concerted reorganization (Head-tilting and Middle-down) of Mediator and creates a Head-Middle sandwich, which stabilizes two CTD segments and brings CTD to CDK7 for phosphorylation; this suggests a CTD-gating mechanism favorable for phosphorylation. The TFIID-based PIC architecture modulates Mediator organization and TFIIH stabilization, underscoring the importance of TFIID in orchestrating PIC-Mediator assembly.

APA, Harvard, Vancouver, ISO, and other styles

13

Padgavhankar, Abhijit V., and Sharad W. Mohod. "Experimental Learning of Digital Power Controller for Photovoltaic Module Using Proteus VSM." Journal of Solar Energy 2014 (September 15, 2014): 1–8. http://dx.doi.org/10.1155/2014/736273.

Full text

Abstract:

The electric power supplied by photovoltaic module depends on light intensity and temperature. It is necessary to control the operating point to draw the maximum power of photovoltaic module. This paper presents the design and implementation of digital power converters using Proteus software. Its aim is to enhance student’s learning for virtual system modeling and to simulate in software for PIC microcontroller along with the hardware design. The buck and boost converters are designed to interface with the renewable energy source that is PV module. PIC microcontroller is used as a digital controller, which senses the PV electric signal for maximum power using sensors and output voltage of the dc-dc converter and according to that switching pulse is generated for the switching of MOSFET. The implementation of proposed system is based on learning platform of Proteus virtual system modeling (VSM) and the experimental results are presented.

APA, Harvard, Vancouver, ISO, and other styles

14

Huang, Jun You. "The Intelligent Identification and Control Systems of Vehicles Drunk Driving." Advanced Materials Research 926-930 (May 2014): 1459–62. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.1459.

Full text

Abstract:

In the light of the passive safety testing method of drunk driving, a new active safe product is designed in the field of automotive electronics: on-board automatic monitoring system for drunk driving. Based on PIC processor control system, the modularity is adopted including sensor detection sub-module, voice and display sub-module, a banned driving control sub-module after drunken, GSM sub-module, GPS positioning receive design ideas of sub-module, and complete the hardware circuit design. In MPLAB-IDE integrated development environment, the PICC compiler is adopted to complete the software design of the system. The maximum error of concentration testing experimental result is 8.2%.

APA, Harvard, Vancouver, ISO, and other styles

15

Li, Qin, and Tao Wang. "Low-Frequency Wireless Accelerometer to Bridge Health Monitoring." Applied Mechanics and Materials 241-244 (December 2012): 858–62. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.858.

Full text

Abstract:

According to the requirements and characteristics of the long-span bridge vibration monitoring, this paper presents one kind of low-frequency wireless accelerometer monitoring system based on PIC and MEMS (Micro-electromechanical Systems) acceleration sensor. The system was composed of sensor module, data acquisition and processing module, micro-processing module, wireless transmitting and receiving module, and a computer system. Model 1221 was the sensor chip, the measure data processed by MCU, and transmitted by wireless transmitting module based on Zigbee networks. As the date was received by the wireless receiving module, re process the sensing data by computer, to get the vibration parameter and assess the vibration. The system was validated with standard vibrator.

APA, Harvard, Vancouver, ISO, and other styles

16

Yusoff, Mohd Irwan, W. Z. Leow, M. Irwanto, N. Gomesh, M. R. Mamat, and I. Safwati. "A New Technique to Improve the Efficiency of Output Power Solar Panel Using PIC 18F4550 Microcontroller." Advanced Materials Research 1008-1009 (August 2014): 31–34. http://dx.doi.org/10.4028/www.scientific.net/amr.1008-1009.31.

Full text

Abstract:

Together with advancement associated with technologies things have gotten simpler and less complicated for people. Automation is usually the employment of manage devices along with details technologies to scale back the need regarding human being do the job inside creation associated with things along with products and services. Solar photovoltaic (PV) technology is regarded as the famous energy source amongst renewable energy sources which in turn that utilize to relieve usage of fossil fuel. PV energy is usually a lot of abundant energy sources among renewable energy. PV technology is change sunlight energy into electrical energy. The performance of electricity of PV module can be affected by solar irradiance and ambient temperature. When PV technology is process solar irradiance, producing lowered performance of PV modules and increasing temperature of PV module. When the temperature of PV module is reach at or more than 35 °C that detected by LM 35, PIC 18F4550 is switched ON the DC cooling system and vice versa. After switch ON the cooling system, the temperature of PV module is reducing. This controller system is an intelligent system because it will run the cooling system automatically when the temperature of PV module reaches setting level that detected by temperature sensors. The higher efficiency of PV cell, the payback period of the system can be shorted and the lifespan of PV module can also be longer.

APA, Harvard, Vancouver, ISO, and other styles

17

Ren, Sheng Le, Yong Zhang Wang, Hua Lu, and Guo Sen Su. "A Precision Tension Control System Based on PIC." Materials Science Forum 532-533 (December 2006): 97–100. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.97.

Full text

Abstract:

As an important factor in composite fiber winding, fiber winding tension influences the product quality directly, and therefore tension control is a key technique in fiber winding techniques. This paper introduces a closed loop tension control system with the PIC single chip computer as the kernel, a function module with TLC5615 D/A converter as the output, AC servomotors as the actuator, and a radius-following arm to measure the real time radius of the scroll. The mechanism of the tension control system is analyzed and the mathematical model is set up. Then the paper expatiates the design of main control circuit, the voltage transformation circuit and the analogy filter circuit. In addition, the paper presents digital filter and control algorithm of the PIC software. The system is proved to have high control precision and rapid time response through performance experiments of the tension control system in different working states, which well meets the anticipated design requirements.

APA, Harvard, Vancouver, ISO, and other styles

18

Yuan, Hai-Bo, Hong-Cheol Na, and Young-Bae Kim. "System identification and robust position control for electro-hydraulic servo system using hybrid model predictive control." Journal of Vibration and Control 24, no. 18 (August 7, 2017): 4145–59. http://dx.doi.org/10.1177/1077546317721417.

Full text

Abstract:

This paper examined system identification using grey-box model estimation and position-tracking control for an electro-hydraulic servo system (EHSS) using hybrid controller composed of proportional-integral control (PIC) and model predictive control (MPC). The nonlinear EHSS model is represented by differential equations. We identify model parameters and verify their accuracy against experimental data in MATLAB to evaluate the validity of this mathematical model. To guarantee improved performance of EHSS and precision of cylinder position, we propose a hybrid controller composed of PIC and MPC. The controller is designed using the Control Design and Simulation module in the Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW). A LabVIEW-based experimental rig is developed to apply the proposed controller in real time. Then, the validity and performance superiority of the hybrid controller were confirmed by comparing them with the MPC and PIC results. Results of real-life experiments show improved robustness and dynamic and static properties of EHSS.

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Hui Hui, Da Gang Liu, La Qun Liu, and Lin Meng. "PIC/MCC Simulations for the Oxygen Microwave Breakdown at Atmospheric Conditions." Advanced Materials Research 981 (July 2014): 859–62. http://dx.doi.org/10.4028/www.scientific.net/amr.981.859.

Full text

Abstract:

In this paper, the code of Particle-In-Cell/Monte Carlo Collision (PIC/MCC) for oxygen microwave breakdown is developed. This code is based on the three dimensional particle-in-cell platform CHIPIC, and with a module for increasing the charge of each super-particle. With this PIC/MCC code, the multiplication rate of the electron density and the delay time in oxygen breakdown at atmospheric conditions are researched. The results show: the multiplication rate of the electron density is periodic, and its period is the half of the electric field period; the breakdown delay time in the gas breakdown increases while the frequency of electric field or the gas pressure increases.

APA, Harvard, Vancouver, ISO, and other styles

20

Bilal Sarwar, Muhammad, N. Perumal, Zuhairi Baharudin, and Mohana Sundaram Muthuvalu. "Energy Efficient Microcontroller Based Wireless Transceiver Module for Robotic Vehicle." Applied Mechanics and Materials 793 (September 2015): 549–53. http://dx.doi.org/10.4028/www.scientific.net/amm.793.549.

Full text

Abstract:

A low power, cost effective and energy efficient microcontroller (PIC 16F877A) based transceiver model has been presented. The designed model entails a combination of programmable microcontroller and relay circuitry to control the robotic vehicle through transceiver module. The model was simulated in a Mikro C environment, for communication signals from controlling side. The simulation results show an energy efficiency of 73%, with a distance of 20 meters for robotic vehicle. The results are in good agreement with theoretical understandings and show a greater efficiency, with low power consumption and reduced complexity. The simulations are found recurrent with stable findings and deemed compatible for applications.

APA, Harvard, Vancouver, ISO, and other styles

21

Jamri, M. S., Zul Hasrizal Bohari, M. F. Baharom, M. H. Jali, M. N. M. Nasir, and T. A. Izzuddin. "Development of Novel Fire Alarm Warning System Using Automated Remote Messaging Method." Applied Mechanics and Materials 793 (September 2015): 578–84. http://dx.doi.org/10.4028/www.scientific.net/amm.793.578.

Full text

Abstract:

This paper discussed on design and development of fire warning system using automated remote messaging method. This device enables to alert the owner whenever fire occur that need rapid attention towards the building. This is maybe due to carelessness of user or gas leakage. Fire warning system is an existing project but it will be enhanced. This project discussed the design and implementation of a fire alarm system using the microcontroller which controlled the entire system. This system comprised of smoke detector that linked to PIC and GSM Modem. When smoke detected, the fire alarm will triggered and send a signal to the PIC. The PIC will process the data and transmit the signal to the GSM modem. The GSM modem will send message to alert the building owner. The owner can make further action by informing the nearest fire department. This module is applied for transferring of GSM SMS message to the owner mobile number. The devices can be the early and fast prevention system for building owner.

APA, Harvard, Vancouver, ISO, and other styles

22

WITTMANN, CHRISTIAN. "l-PARTS OF DIVISOR CLASS GROUPS OF CYCLIC FUNCTION FIELDS OF DEGREE l." International Journal of Number Theory 03, no. 02 (June 2007): 171–90. http://dx.doi.org/10.1142/s1793042107000857.

Full text

Abstract:

Let l be a prime number and K be a cyclic extension of degree l of the rational function field 𝔽q(T) over a finite field of characteristic ≠ = l. Using class field theory we investigate the l-part of Pic 0(K), the group of divisor classes of degree 0 of K, considered as a Galois module. In particular we give deterministic algorithms that allow the computation of the so-called (σ - 1)-rank and the (σ - 1)2-rank of Pic 0(K), where σ denotes a generator of the Galois group of K/𝔽q(T). In the case l = 2 this yields the exact structure of the 2-torsion and the 4-torsion of Pic 0(K) for a hyperelliptic function field K (and hence of the 𝔽q-rational points on the Jacobian of the corresponding hyperelliptic curve over 𝔽q). In addition we develop similar results for l-parts of S-class groups, where S is a finite set of places of K. In many cases we are able to prove that our algorithms run in polynomial time.

APA, Harvard, Vancouver, ISO, and other styles

23

Nofuentes, G., J. Aguilera, R. L. Santiago, J. de la Casa, and L. Hontoria. "A reference-module-based procedure for outdoor estimation of crystalline silicon PV module peak power." Progress in Photovoltaics: Research and Applications 14, no. 1 (2005): 77–87. http://dx.doi.org/10.1002/pip.636.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Bilal Sarwar, Muhammad, Perumal Nallagownden, Zuhairi Baharudin, and Mohana Sundaram Muthuvalu. "PC Based Energy Efficient Wireless Transceiver Module with ZigBee." Applied Mechanics and Materials 785 (August 2015): 724–28. http://dx.doi.org/10.4028/www.scientific.net/amm.785.724.

Full text

Abstract:

The aim of this research is to develop a low power, low cost and energy efficient transceiver model which is integrated with programmable microcontroller and ZigBee transponder. A combination of programmable microcontroller with ZigBee transponder is used to control the transceiver module with computer commands. It has b een simulated for transmitting and receiving the communication signals from any movable device with more efficiently and use low power consumption. ZigBee Transponder is preferable as compared to radio frequency identification (RFID) due to IEEE 802.15.4 standard that promises stable data transmission with low power consumption device and having higher network flexibility. PIC 16F877A programmable microcontroller with coding in Mikro C software is simulated and used with computer control instructions. Series of experiments has been conducted to ensure the stability and low power consumption of this model.

APA, Harvard, Vancouver, ISO, and other styles

25

van Huynh, Dinh, and Phan Dan. "Rings characterized by cyclic modules." Glasgow Mathematical Journal 31, no. 2 (May 1989): 251–56. http://dx.doi.org/10.1017/s0017089500007801.

Full text

Abstract:

A ring R is called right PCI if every proper cyclic right R-module is injective, i.e. if C is a cyclic right R-module then CR ≅ RR or CR is injective. By [2] and [3], if R is a non-artinian right PCI ring then R is a right hereditary right noetherian simple domain. Such a domain is called a right PCI domain. The existence of right PCI domains is guaranteed by an example given in [2]. As generalizations of right PCI rings, several classes of rings have been introduced and investigated, for example right CDPI rings, right CPOI rings (see [8], [6]). In Section 2 we define right PCS, right CPOS and right CPS rings and study the relationship between all these rings.

APA, Harvard, Vancouver, ISO, and other styles

26

Silvestre, S., and A. Chouder. "Effects of shadowing on photovoltaic module performance." Progress in Photovoltaics: Research and Applications 16, no. 2 (September 14, 2007): 141–49. http://dx.doi.org/10.1002/pip.780.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Dirnberger, Daniela, Björn Müller, and Christian Reise. "PV module energy rating: opportunities and limitations." Progress in Photovoltaics: Research and Applications 23, no. 12 (May 22, 2015): 1754–70. http://dx.doi.org/10.1002/pip.2618.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Aziz, Azridjal, Rahmat Iman Mainil, Afdhal Kurniawan Mainil, Sayfri Syafri, and Muhammad Faizal Syukrillah. "Design of Portable Beverage Cooler Using One Stage Thermoelectric Cooler (TEC) Module." Aceh International Journal of Science and Technology 6, no. 1 (April 17, 2017): 29. http://dx.doi.org/10.13170/aijst.6.1.5427.

Full text

Abstract:

The Portable Beverage Cooler (PBC) has been designed to satisfy the need of cooler apparatus that could be carried easily. The utilization of this apparatus was intended to minimize the environmental damage affected by vapour compression refrigeration system using CFCs Refrigerant. The peltier effect from thermoelectric module was utilized in this PBC and called as Thermoelectric Cooler (TEC). Furthermore, heat-sink and fan were needed to ensure the cooling effect continously worked. To achieved the objectives of this machine (portable, environment-friendly, low watt, affordable), the design consideration are heat load, insulating material, weight of components, electric consumption, and dimension of the cooling box. The results of the design shows the PBC cooling box dimension is 6 cm x 6.5 x 15 cm. The insulation of the PBC cooling box are polyurethane foam and polystyrene expanded with thickness 6 mm and 5.3 mm, respectively. The alumunium plate was applied as inner wall to enhance the cooling capacity of cooling room temperature. In this PBC was used one stage of TEC that could yield cooling room temperature until 15 oC in 30 minutes operation by consuming 20 W of electricity.

APA, Harvard, Vancouver, ISO, and other styles

29

Chen, Pi-Yun, Kuei-Hsiang Chao, and Bo-Jyun Liao. "Joint Operation between a PSO-Based Global MPP Tracker and a PV Module Array Configuration Strategy under Shaded or Malfunctioning Conditions." Energies 11, no. 8 (August 1, 2018): 2005. http://dx.doi.org/10.3390/en11082005.

Full text

Abstract:

This paper aims to present a smart, particle swarm optimization (PSO)-based, real time configuration strategy for a photovoltaic (PV) module array in the event of shadow cast on a PV module(s) and/or module failure as an effective approach to power generation efficiency elevation. At the first step, the respective maximum output power levels provided by a normal operating array at various levels of irradiation and module surface temperatures are measured and entered as references into a database. Subsequently, the maximum output power (MPP) level, tracked by a MPP tracker, is feedbacked for a comparison with an aforementioned reference as a way to tell whether there is either a shadow or a malfunction event on a PV module(s). Once an abnormal operation is detected, the presented smart configuration algorithm is performed to reconfigure the PV module array such that the array is operated at the global MPP as intended. Furthermore, by use of a PIC microcontroller that is a family of microcontrollers made by Microchip Technology for compact implementation, this study is experimentally validated as an effective approach to locating the global MPP at all events.

APA, Harvard, Vancouver, ISO, and other styles

30

Chang, Xiao Fei, Meng Meng Li, and Ji Yan. "Developing the Driver Module for PCI Board Using RT-LAB Software." Advanced Materials Research 505 (April 2012): 357–61. http://dx.doi.org/10.4028/www.scientific.net/amr.505.357.

Full text

Abstract:

The RT-LAB real-time simulation software can expediently and rapidly apply the Simulink model to the hard-in-the-loop simulation system and greatly save the expenses for development, experiment and measurement, thus cutting down the development cycle. The use of the self-made PCI board in the RT-LAB software requires the development of its driver module by the user himself. This paper presents the idea and development processes of the PCI bus-based board driver with the RT-LAB software. Taking as an example the NI-6230 multifunctional data acquisition board driver, the paper also presents the PCI board driver's key codes and their compilation with the RT-LAB software.

APA, Harvard, Vancouver, ISO, and other styles

31

Mignone, A., G. Bodo, B. Vaidya, and G. Mattia. "A Particle Module for the PLUTO Code. I. An Implementation of the MHD–PIC Equations." Astrophysical Journal 859, no. 1 (May 17, 2018): 13. http://dx.doi.org/10.3847/1538-4357/aabccd.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Sumiaty, R. Susty, Indri Astuti, and Dede Suratman. "PENGEMBANGAN MODUL BERBASIS WEB UNTUK PEMBELAJARAN ILMU PENGETAHUAN SOSIAL TERPADU." Perspektif Ilmu Pendidikan 33, no. 2 (October 29, 2019): 69–78. http://dx.doi.org/10.21009/pip.332.8.

Full text

Abstract:

This research is aimed to produce web module that titled hasnenians web module designed in social science study, review the final web module’s profile, and to know how effective this web module for increase student’s final score in SMP Negeri 1 Sanggau. This research and development consists to Borg and Gall theory, and for design of instructional system take an ADDIE (Analyze, Design, Develop, Implementation and Evaluation) Instructional Development Model. There are the steps of the web module that combined the syntax of R & D model and ADDIE model, they are; pre research Steps that consist of research and information collecting, develop steps that consist of develop preliminary form of product, expert validation and revise, one to one trial, small group trial, field trial and final product revisi, and then Implementation steps, and the final product of web module can run out in the classroom as one of learning source to help the students to understand about social science. The web module can access by online for everyone anywhere and anytime. The result of this research showed that hasnenians web module have given a lot in learning process that proved by the effect size score and also from pretest and posttest’s score.

APA, Harvard, Vancouver, ISO, and other styles

33

Rina Sukawati, Mita Septiani, Suprayekti, Sridadi Suparto,. "TEKNIK PENULISAN MODUL KETERAMPILAN BELAJAR UNTUK MAHASISWA." Perspektif Ilmu Pendidikan 28, no. 1 (August 25, 2017): 65. http://dx.doi.org/10.21009/pip.281.8.

Full text

Abstract:

Abstract: To gain the graduate competence successfully, the university students need to have learning skills. Assisting thestudents to have the learning skills can be done by providing them with an appropriate module. This research was intendedto identify the procedure of developing the module and produce the module which the students can use dependently toimprove their learning skills. The research was conducted at the School of Education, State University of Jakarta. as fromFebruary through April 2013. The data to be analyzed descriptively were collected by studying the relevant documents,observation, and distributing questionairs to the students. The research found out three phases in producing the module:planning, writing preparation, and writing and editing. Besides, the research produced a the module for learning skills. Keywords: module, learning skills, dependent learning

APA, Harvard, Vancouver, ISO, and other styles

34

Yamamoto, Kenji, Akihiko Nakajima, Masashi Yoshimi, Toru Sawada, Susumu Fukuda, Takashi Suezaki, Mitsuru Ichikawa, et al. "A thin-film silicon solar cell and module." Progress in Photovoltaics: Research and Applications 13, no. 6 (2005): 489–94. http://dx.doi.org/10.1002/pip.645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

McCambridge, James D., Myles A. Steiner, Blair L. Unger, Keith A. Emery, Eric L. Christensen, Mark W. Wanlass, Allen L. Gray, et al. "Compact spectrum splitting photovoltaic module with high efficiency." Progress in Photovoltaics: Research and Applications 19, no. 3 (September 24, 2010): 352–60. http://dx.doi.org/10.1002/pip.1030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Arya, R. R., and D. E. Carlson. "Amorphous silicon PV module manufacturing at BP solar." Progress in Photovoltaics: Research and Applications 10, no. 2 (2002): 69–76. http://dx.doi.org/10.1002/pip.418.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Cunningham, D., M. Rubcich, and D. Skinner. "Cadmium telluride PV module manufacturing at BP Solar." Progress in Photovoltaics: Research and Applications 10, no. 2 (2002): 159–68. http://dx.doi.org/10.1002/pip.417.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Colvin, Dylan J., Eric J. Schneller, and Kristopher O. Davis. "Impact of interconnection failure on photovoltaic module performance." Progress in Photovoltaics: Research and Applications 29, no. 5 (March 9, 2021): 524–32. http://dx.doi.org/10.1002/pip.3401.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Wyman, Lesley. "Training the trainer: module for change." Primary Health Care 4, no. 3 (March 1986): 19–20. http://dx.doi.org/10.7748/phc.4.3.19.s12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Ade', Oyetunji Samson, and Daniel Ale. "Development of MATLAB-Based Digital Signal Processing Teaching Module with Graphical User Interface Environment for Nigerian University." International Journal of Engineering & Technology 2, no. 3 (August 17, 2013): 230. http://dx.doi.org/10.14419/ijet.v2i3.1081.

Full text

Abstract:

The development of a teaching aid module for digital Signal processing (DSP) in Nigeria Universities was undertaken to address the problem associated with non-availability instructional module. This paper annexes the potential of Peripheral Interface Controllers (PICs) with MATLAB resources to develop a PIC-based system with graphic user interface environment suitable for data acquisition and signal processing. The module accepts data from three different sources: real time acquisition, pre-recorded data acquisition and software-generated data. The developed system is able to perform analysis on both stationary and non-stationary signals using Fast Fourier Transform (FFT) and Short Time Fourier Transform (STFT). The STFT-based approach provides Improved Joint Time Frequency Analysis (IJTFA) of signals. A graphical user interface (GUI) was developed to create interactive environment for understanding the operations of digital signal processing. The developed system not only provides interactive platform for data acquisition, spectral analysis and filter design but also makes it avoidable to students in Nigeria University.

APA, Harvard, Vancouver, ISO, and other styles

41

Susanto, Susanto. "BAHAN BELAJAR MANDIRI SEBAGAI SUATU MODEL MODUL STUDI ISLAM BERWAWASAN DERADIKALISASI PEMAHAMAN AGAMA." Perspektif Ilmu Pendidikan 30, no. 2 (October 18, 2016): 87. http://dx.doi.org/10.21009/pip.302.3.

Full text

Abstract:

The research development model of Islamic study self-learning module with religion understandingde-radicalization is to improve students’ ability to understand the teachings of Islam without radicalism. Thestudy began with the development of a preliminary study following the model by Borg & Gall, then the productdevelopment followed the procedures of instructional development model (MPI) resulting the final product in theform of self-study module. The validation test and product development were carried out properly according to theprocedures, starting from identifying, developing and evaluating and revising. To test the effectiveness of productdevelopment, the researcher used two techniques of assessing user’s response and t- test. The results of the effectivenesstest show that the module has effectively improved the students’ ability to use the methods of understanding theIslam teachings without radicalism. Keywords: module, self-study materials, de-radicalization, product development

APA, Harvard, Vancouver, ISO, and other styles

42

Vázquez, Manuel, and Ignacio Rey‐Stolle. "Photovoltaic module reliability model based on field degradation studies." Progress in Photovoltaics: Research and Applications 16, no. 5 (August 2008): 419–33. http://dx.doi.org/10.1002/pip.825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Kenny, Robert P., Anatoli I. Chatzipanagi, and Tony Sample. "Preconditioning of thin-film PV module technologies for calibration." Progress in Photovoltaics: Research and Applications 22, no. 2 (July 9, 2012): 166–72. http://dx.doi.org/10.1002/pip.2234.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Weiss, Lucas, Mohamed Amara, and Christophe Ménézo. "Impact of radiative-heat transfer on photovoltaic module temperature." Progress in Photovoltaics: Research and Applications 24, no. 1 (July 14, 2015): 12–27. http://dx.doi.org/10.1002/pip.2633.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Lefevre, Buvana, Stef Peeters, Jef Poortmans, and Johan Driesen. "Predetermined static configurations of a partially shaded photovoltaic module." Progress in Photovoltaics: Research and Applications 25, no. 2 (October 18, 2016): 149–60. http://dx.doi.org/10.1002/pip.2834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Tao, Meng, Vasilis Fthenakis, Burcak Ebin, Britt‐Marie Steenari, Evelyn Butler, Parikhit Sinha, Richard Corkish, Karsten Wambach, and Ethan S. Simon. "Major challenges and opportunities in silicon solar module recycling." Progress in Photovoltaics: Research and Applications 28, no. 10 (July 22, 2020): 1077–88. http://dx.doi.org/10.1002/pip.3316.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Wang, Zhong Xian, Feng Chai, Yong Geng Wei, and Yi Lin Song. "Study on Small Power BLDCM Drive System." Key Engineering Materials 579-580 (September 2013): 823–28. http://dx.doi.org/10.4028/www.scientific.net/kem.579-580.823.

Full text

Abstract:

According to the voltage balance equation, the paper deduces the mathematical model of BLDCM on the basis of analyzing the operation principle. In SIMULINK environment, the BLDCM ontology module is built by adopting the combination of BLDCM state equation with S function method. The built motor ontology module proves to be accurate and reasonable through the analysis of the simulation waveform, which helps to analysis BLDCM electronic commutation, etc. Again taking LM621N as commutation control chip, using PIC microcontroller output variable frequency square wave, and through external input device to adjust the square wave frequency, thus realizes the control of motor speed. A brushless dc motor drive with circuit protection functions is designed by the method of combining hardware and software. Not only the motor work situation of ontology is intuitively reflected, and the development cycle is shorted.

APA, Harvard, Vancouver, ISO, and other styles

48

Kang, Joon-Seok, Ramon Christian Eusebio, and Han-Seung Kim. "Boron removal by activated carbon and microfiltration for pre-treatment of seawater desalination." Water Supply 11, no. 5 (December 1, 2011): 560–67. http://dx.doi.org/10.2166/ws.2011.086.

Full text

Abstract:

This study aimed to enhance boron removal through powdered activated carbon adsorption (PAC) and application of a micro-filtration (MF) process as a pretreatment of a seawater reverse osmosis (SWRO) process. Batch and continuous experiments were conducted to investigate the effect of membrane filtration as well as PAC addition on boron removal in reconstituted seawater. In batch test, two kinds of polyvinylidene fluoride (PVDF) hollow fiber membrane, Module A and Module B, were used to assess the influence of pH and PAC on boron removal, whereas in continuous mode, two MF systems with submerged PVDF flat-sheet membrane were run in parallel. Modules A and B obtained the highest percentage boron removal at pH 9 in the batch experiment with an average value of 47.33%, and their concentration of boron was further reduced after addition of PAC increasing the removal to 51.33 and 69.33%, respectively. For the continuous operation, PAC addition decreased the boron concentration by 20–30 and 40% in the reactor and effluent, respectively. On the other hand, only 5% reduction was obtained inside the reactor and 30–40% in the effluent for the system without PAC. Thus, operating the system at high pH with PAC addition could enhance the performance of the adsorption-MF system, which can be used as a pretreatment for the SWRO process.

APA, Harvard, Vancouver, ISO, and other styles

49

Egwu, Igbo N. "Reorientation in Primary Health Care Implementation: An Educational Intervention." International Quarterly of Community Health Education 9, no. 3 (October 1988): 231–42. http://dx.doi.org/10.2190/51e2-0fqu-ngdn-3j59.

Full text

Abstract:

The study was designed as a three-phase approach to reorient Community Health Officers working in Odukpani (one of the first model PHC Centers in Nigeria) toward Primary Health Care: 1) knowledge, attitude, and practice determination; 2) a PHC-based training module; and 3) teacher-learner evaluation. The results strongly suggest that this type of deliberate intervention to remove an identified program constraint, is crucial to the anticipated role of PHC workers as agents of change. The implications of the results for PHC system development in Nigeria are highlighted.

APA, Harvard, Vancouver, ISO, and other styles

50

Kim, Han-Byul, Tae-Hee Jung, Gi-Hwan Kang, and Hyo Sik Chang. "The Effect of PID Generation by Components of the PV Module." Journal of the Korean Institute of Electrical and Electronic Material Engineers 26, no. 10 (October 1, 2013): 760–65. http://dx.doi.org/10.4313/jkem.2013.26.10.760.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Modèle PIC'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles