Relevant bibliographies by topics / Modeling of the Base Isolators

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Modeling of the Base Isolators'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Modeling of the Base Isolators.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Modeling of the Base Isolators"

1

Dr., Thamir Al-Azawi* Dr. AbdulMuttalib I.S. AlMusaui Dr. Salah R. Al-Zaidee. "MODELING OF BASE ISOLATOR AS STRUCTURAL ELEMENT." Global Journal of Engineering Science and Research Management 4, no. 7 (2017): 92–103. https://doi.org/10.5281/zenodo.836621.

Full text
Abstract:
Two proposals for modeling of the base isolators as a structural element have been given. The first model simulates base isolator as two springs, while the second one models base isolator as a deep beam element. Comparison between the two models indicates that if the experimental data to determine the value of EI/L are available, the modeling of base isolator as a deep frame element will be more accurate than the model of two springs. In both models, the energy dissipation in the base isolators has been modeled by an equivalent viscous damping. Based on the comparison with experimental work it
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Sooraj, and Ganesh Jaiswal. "Effectiveness of Different Base Isolation on Stepped Buildings." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (2022): 4345–53. http://dx.doi.org/10.22214/ijraset.2022.45997.

Full text
Abstract:
Abstract: Seismic isolation devices are commonly employed to protect structures from the impacts of severe ground motions. ETABS2016, a modelling and analysis programme, was used in this work to model and analyse the isolated stepped building. Rubber isolator link components were used as a single joint element to represent the rubber isolators between the ground and the superstructure. El-Centro seismic records were used to analyse the isolated building. The lateral inter-storey drifts, story displacement and peak absolute floor accelerations, of the isolated building were compared to those of
APA, Harvard, Vancouver, ISO, and other styles
3

Jamuna, M. Ganga, and Dr. P Anuradha. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering 13, no. 6 (2024): 10–15. http://dx.doi.org/10.35940/ijsce.c8141.13060124.

Full text
Abstract:
The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearing in which IS 875:52015, IS
APA, Harvard, Vancouver, ISO, and other styles
4

M, Ganga Jamuna. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering (IJSCE) 13, no. 6 (2024): 10–15. https://doi.org/10.35940/ijsce.C8141.13060124.

Full text
Abstract:
<strong>Abstract:</strong> The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearin
APA, Harvard, Vancouver, ISO, and other styles
5

M, Ganga Jamuna. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering (IJSCE) 13, no. 6 (2024): 10–15. https://doi.org/10.35940/ijsce.C8141.13060124.

Full text
Abstract:
<strong>Abstract:</strong> The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearin
APA, Harvard, Vancouver, ISO, and other styles
6

M, Ganga Jamuna. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering (IJSCE) 13, no. 6 (2024): 10–15. https://doi.org/10.35940/ijsce.C8141.13060124.

Full text
Abstract:
<strong>Abstract:</strong> The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearin
APA, Harvard, Vancouver, ISO, and other styles
7

M, Ganga Jamuna. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering (IJSCE) 13, no. 6 (2024): 10–15. https://doi.org/10.35940/ijsce.C8141.13060124.

Full text
Abstract:
<strong>Abstract:</strong> The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearin
APA, Harvard, Vancouver, ISO, and other styles
8

M, Ganga Jamuna. "Comparative Analysis of G+15 Building with and Without Lead-Bearing Rubber Base Isolators Using Etabs." International Journal of Soft Computing and Engineering (IJSCE) 13, no. 6 (2024): 10–15. https://doi.org/10.35940/ijsce.C8141.13060124.

Full text
Abstract:
<strong>Abstract:</strong> The main principle of this project is to protect the buildings by constructing them as earthquake-resistant structures. Base Isolation is a flexible layer between the substructure and superstructure uncoupling the structure from damaging effects from ground motion to resist the vibrations in the structure. It is important to use high technology like base Isolation which protects the structure against extreme earthquakes without sacrificing the performance of the structure. The comparative study is conducted on a G+15 story building with and without Lead Rubber bearin
APA, Harvard, Vancouver, ISO, and other styles
9

Uras, R. A. "Use of a Viscoelastic Model for the Seismic Response of Base-Isolated Buildings." Journal of Pressure Vessel Technology 118, no. 3 (1996): 374–83. http://dx.doi.org/10.1115/1.2842203.

Full text
Abstract:
Due to recent developments in elastomer technology, seismic isolation using elastomer bearings is rapidly becoming an acceptable design tool to enhance structural seismic margins and to protect people and equipment from earthquake damage. With proper design of isolators, high-energy seismic input motions can be transformed into low-frequency, low-energy harmonic motions, and the accelerations acting on the isolated building may be significantly reduced. Several alternatives exist for the modeling of the isolators. This study is concerned with the use of a viscoelastic model to predict the seis
APA, Harvard, Vancouver, ISO, and other styles
10

Calvi, Paolo M., and David M. Ruggiero. "Numerical modelling of variable friction sliding base isolators." Bulletin of Earthquake Engineering 14, no. 2 (2015): 549–68. http://dx.doi.org/10.1007/s10518-015-9834-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Modeling of the Base Isolators"

1

Ardic, Halil. "Design And Modeling Elastomeric Vibration Isolators Using Finite Element Method." Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615684/index.pdf.

Full text
Abstract:
In this thesis, a process is developed for designing elastomeric vibration isolators in order to provide vibration isolation for sensitive equipment being used in ROKETSAN A.S.&rsquo<br>s products. For this purpose, first of all, similar isolators are examined in the market. After that, appropriate elastomeric materials are selected and their temperature and frequency dependent dynamic properties are experimentally obtained. Parametric finite element model of the isolator is then constituted in ANSYS APDL using the properties of elastomeric materials and the conceptual design of the isolator.
APA, Harvard, Vancouver, ISO, and other styles
2

Zinnecker, Alicia M. "Modeling for Control Design of an Axisymmetric Scramjet Engine Isolator." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1354215841.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hernandez, Manuel A. "A decision support system for the optimal design of base-motion isolators." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03sep%5FHernandez.pdf.

Full text
Abstract:
Thesis (M.S. in Mechanical Engineering and M.S. in Information Technology Management)--Naval Postgraduate School, September 2003.<br>Thesis advisor(s): Joshua Gordis, Dan Boger. Includes bibliographical references (p. 85-86). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
4

V, K. Thalakkatukalathil Vinod. "Electromagnetic modeling and characterization of anisotropic ferrite materials for microwave Isolators/Circulators." Thesis, Brest, 2017. http://www.theses.fr/2017BRES0134/document.

Full text
Abstract:
Les circulateurs et les isolateurs à ferrite sont couramment utilisés dans l’électronique hyperfréquence en raison de leur forte résistivité électrique et de leur aimantation spontanée élevée. La conception et l’optimisation des dispositifs micro-ondes à ferrites nécessitent d’une part la connaissance de leurs propriétés dynamiques, permittivité complexe et tenseur de perméabilité, et d’autre part le contrôle de la propagation de l’onde électromagnétique (EM) qui conditionne leurs performances. Les logiciels commerciaux de simulation utilisent différents modèles théoriques pour décrire le tens
APA, Harvard, Vancouver, ISO, and other styles
5

Kässi, Jonna. "Modeling of Base Oil Blends." Thesis, KTH, Skolan för kemivetenskap (CHE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-90704.

Full text
Abstract:
Nynas AB is a company that refines oil  for different applications such as insulating oils  for the electrical industry and base oils for both the lubricant and chemical industry. Different types of base oils are produced for the lubricant industry in order to provide required properties such as good viscosity, solvency, volatility, etc. But sometimes, the oils produced in the refineries (known as “straight cut” oils) do not have the all properties required by a customer, and a way for achieving those properties is to blend different straight cut base oils. To save money and time, empirical co
APA, Harvard, Vancouver, ISO, and other styles
6

Edalath, Sanooj Sadique. "Fuzzy Logic Seismic Vibration Control of Buildings." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1335462916.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xiang, Haiou. "BLUETOOTH-BASE WORM MODELING AND SIMULATION." Master's thesis, University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2669.

Full text
Abstract:
Bluetooth is one of the most popular technologies in the world in the new century. Meanwhile it attracts attackers to develop new worm and malicious code attacking Bluetooth wireless network. So far the growth of mobile malicious code is very fast and they have become a great potential threat to our society. In this thesis, we study Bluetooth worm in Mobile Wireless Network. Firstly we investigate the Bluetooth technology and several previously appeared Bluetooth worms, e.g. "Caribe","Comwar", and we find the infection cycle of a Bluetooth worm. Next, we develop a new simulator, Bluetooth Worm
APA, Harvard, Vancouver, ISO, and other styles
8

KASHAYI, NAGARAJU C. "MODELING BASE CRASH RATES FOR INTERSECTIONS." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1163775240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Thaijaroen, Woothichai. "Nonlinear dynamic modelling of rubber isolators using six parameters based on parabolic spring, springpot, and smooth-slip friction element." Thesis, University of Bristol, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.492630.

Full text
Abstract:
A time-domain six-parameter model is adopted to simulate the vibration behaviour of various rubber-isolators at constant temperature and preload over the frequency range of 0.05-25 Hz. The model consists of three components based on a nonlinear parabolic spring, a fractional-derivative-based springpot, and a smooth-slip friction element. The adopted mode working in one-dimensional manner is capable of generating force as a function of displacement.
APA, Harvard, Vancouver, ISO, and other styles
10

Song, Jin E. "Hierarchical multiscale modeling of Ni-base superalloys." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/34855.

Full text
Abstract:
Ni-base superalloys are widely used in hot sections of gas turbine engines due to the high resistance to fatigue and creep at elevated temperatures. Due to the demands for improved performance and efficiency in applications of the superalloys, new and improved higher temperature alloy systems are being developed. Constitutive relations for these materials need to be formulated accordingly to predict behavior of cracks at notches in components under cyclic loading with peak dwell periods representative of gas turbine engine disk materials. Since properties are affected by microstructure at var
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Modeling of the Base Isolators"

1

Bilby, Curt. Modeling a lunar base program. [s.n.], 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dell, Robert F. Modeling Army maneuver and training base realignment and closure. Naval Postgraduate School, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration., ed. Anisotropic constitutive modeling for nickel-base single crystal superalloys. University of Cincinnati, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Associates, Dick Conway &. Regional economic and demographic data base, modeling, and forecasting: Data base for Puget Sound Region. The Associates, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

S, Chen Peter P., Wong Leah Y, and International Conference on Conceptual Modeling (25th : 2006 : Tucson, Ariz.), eds. Active conceptual modeling of learning: Next generation learning-base system development. Springer, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kyler, Brent J. Forecast modeling for estimating Base Realignment & Closure (BRAC) environmental restoration costs. Naval Postgraduate School, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Perkins, Steven W. Numerical modeling of geosynthetic reinforced flexible pavements. Western Transportation Institute, Dept. of Civil Engineering, Montana State University, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rezende, Fernando de Ferreira. Transaction services for knowledge base management systems: Modeling aspects, architectural issues, and realization techniques. Infix, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1934-, Morokuma K., and Musaev Djamaladdin G, eds. Computational modeling for homogeneous and enzymatic catalysis: A knowledge-base for designing efficient catalysts. Wiley-VCH, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fisher, Gary T. Development of a data base for water-quality modeling of the Patuxent River Basin, Maryland. Dept. of the Interior, U.S. Geological Survey, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Modeling of the Base Isolators"

1

Marioni, Agostino. "Base Isolators." In Anti-Seismic Devices. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-62703-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, X., C. Marsh, and A. Pall. "Studies on friction base isolators." In Earthquake Engineering, edited by Shamim A. Sheikh and S. M. Uzumeri. University of Toronto Press, 1991. http://dx.doi.org/10.3138/9781487583217-046.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Billings, L. J., and R. Shepherd. "Mathematical modeling of seismic isolators." In Earthquake Engineering, edited by Shamim A. Sheikh and S. M. Uzumeri. University of Toronto Press, 1991. http://dx.doi.org/10.3138/9781487583217-032.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bilal, Ahmed, and Zaid Mohammad. "Non-linear Analysis of Base-Isolated Building Having Optimized Number of Base Isolators." In Lecture Notes in Civil Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5673-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bharti, Shiv Dayal, Mahendra Kumar Shrimali, Arnav Anuj Kasar, and Tushar Kanti Datta. "Design of Test Setup for Prototype Testing of Base Isolators." In Lecture Notes in Civil Engineering. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-67443-8_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Neri, Paolo, and Jeremiah Holzbauer. "Experimental Characterization and Phenomenological Modeling of Wire Rope Isolators." In NODYCON Conference Proceedings Series. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-50635-2_42.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Reyes, Juan C. "Seismic Behaviour of Torsionally-Weak Buildings with and Without Base Isolators." In Seismic Behaviour and Design of Irregular and Complex Civil Structures IV. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-83221-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mo, Y. L., Witarto Witarto, Kuo-Chun Chang, Shiang-Jung Wang, Yu Tang, and Robert P. Kassawara. "Periodic Material-Based Three-Dimensional (3D) Seismic Base Isolators for Small Modular Reactors." In Concrete Structures in Earthquake. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3278-4_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rithuparna, R., V. N. Varada, and S. C. Mohan. "Effective Peripheral Distribution of Base Isolators for Plan Asymmetric Buildings to Minimise Torsion." In Resilient Infrastructure. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-6978-1_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Di Sarno, Luigi, Luisa Berto, Maria Gabriella Castellano, Michalis Fragiadakis, Irene Rocca, and Anna Saetta. "Experimental Performance of Pendulum Base Isolators for Seismic Protection of Busts and Statues." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-66888-3_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Modeling of the Base Isolators"

1

Knoll, Jonathan, Mark Ott, Kevin Cooney, and Michael Seifert. "Multiphysics Simulation of Pylon Fluid-Elastomeric Isolators." In Vertical Flight Society 74th Annual Forum & Technology Display. The Vertical Flight Society, 2018. http://dx.doi.org/10.4050/f-0074-2018-12878.

Full text
Abstract:
A coupled fluid-structure interaction (FSI) simulation was developed to evaluate a new design feature in the LIVE® vibration isolation system of the 505 Jet Ranger X. Efficient modeling of fluid and elastomeric characteristics is enabled by simplifying the internal fluid boundaries and adjusting fluid compressibility. The approach provides an accurate analysis of the internal loading within the LIVE structure. Computed results substantiate the LIVE design in terms of strength, durability, and component deflection. The FSI simulation also supports dynamic tuning of the LIVE to achieve the targe
APA, Harvard, Vancouver, ISO, and other styles
2

S, Reshma, Sajeeb R., and Ancy Mathew. "Experimental Evaluation of Compression Properties of Reclaimed Rubber Base Isolator." In 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.27.

Full text
Abstract:
Traditional rubber seismic isolators are rarely employed for residential buildings as they are big in size, heavy and expensive. Fiber reinforced elastomeric isolators (FREIs) have been identified to provide cost effective base isolation. In this paper, base isolators are developed using reclaimed rubber reinforced with carbon fiber reinforcement polymer (CFRP). Vertical stiffness of the isolator is determined experimentally. Isolators with 4, 6, 8, 10 11 and 12 layers of reclaimed rubber pads with and without CFRP reinforcement are considered in the study. Effect of aspect ratio on vertical s
APA, Harvard, Vancouver, ISO, and other styles
3

Mathew, Ancy, and Sajeeb R. "Seismic Performance of Multistoried Building Frames with Unbonded Scrap Tyre Pad Isolators." In 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.26.

Full text
Abstract:
Base isolation is one of the most powerful tools for earthquake protection of structures. The huge cost of conventional isolators makes them unaffordable for developing countries. The Scrap tyre pad isolator is an emerging low-cost technology for the seismic protection of structures. The tread portion of tyre can be cut into pads of definite size and arranged one above the other to form the isolator. In the present study, a G+7 storied structure isolated with scrap tyre pad isolators was analyzed using the response spectrum method in ETABS. The performance was also compared with that of conven
APA, Harvard, Vancouver, ISO, and other styles
4

Kaul, Sudhir. "Multi-Degree-of-Freedom Modeling of Mechanical Snubbing Systems." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-47144.

Full text
Abstract:
This paper presents a multi-degree-of-freedom model for the analysis of mechanical snubbing in elastomeric isolators. The model uses a system of elastomeric isolators and snubbers to assemble a rigid body with three degrees-of-freedom to a rigid frame. The isolators are supplemented by the snubbing system so as to limit the displacement of the rigid body in all three directions of motion when the system undergoes transient loading or overloading conditions. The model is piecewise non-linear and uses normalized Bouc-Wen elements in order to capture inherent hysteresis of the elastomeric isolato
APA, Harvard, Vancouver, ISO, and other styles
5

M., Anandhakrishnan, Asif Basheer, and Ancy Mathew. "Evaluation of Vertical Stiffness of Scrap Tyre Pad Base Isolator with Change in Aspect Ratio." In 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.23.

Full text
Abstract:
Earthquake has severe effect on all kinds of structures. Usually, seismic isolation is done in case of high-rise buildings. But from the past experiences it can be observed that the effect of earthquake is not only restricted to high rise framed structures, but also to the low rise unreinforced masonry structures. In developing nations, it is very expensive to finance earthquake isolation measures to safeguard buildings which are not classified as important buildings, such as houses or other minor structures, making the adoption of this type of system almost unfeasible. By incorporating low ho
APA, Harvard, Vancouver, ISO, and other styles
6

Mazzola, J. L., M. Greatti, C. Monzio Compagnoni, et al. "Modeling the Temperature Dependence of TDDB in Galvanic Isolators Based on Polymeric Dielectrics." In ESSDERC 2023 - IEEE 53rd European Solid-State Device Research Conference (ESSDERC). IEEE, 2023. http://dx.doi.org/10.1109/essderc59256.2023.10268573.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Yancheng, and Jianchun Li. "Development and Modeling of a Highly-Adjustable Base Isolator Utilizing Magnetorheological Elastomer." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3037.

Full text
Abstract:
This paper presents a recent research breakthrough on the development of a novel adaptive seismic isolation system as the quest for seismic protection for civil structures, utilizing the field-dependent property of the magnetorheological elastomer (MRE). A highly-adjustable MRE base isolator was developed as the key element to form smart seismic isolation system. The novel isolator contains unique laminated structure of steel and MRE layers, which enable its large-scale civil engineering applications, and a solenoid to provide sufficient and uniform magnetic field for energizing the field-depe
APA, Harvard, Vancouver, ISO, and other styles
8

Fowler, Bryce L., and Raymond K. Yee. "Application of Finite Volume Method for Solid Mechanics." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-55297.

Full text
Abstract:
Polymers constitute a large class of nearly incompressible solid materials (i.e., Poisson’s Ratio near 0.5). These materials are often used as passive vibration isolators. Accurately modeling vibration isolators made of nearly incompressible materials has been extremely difficult with standard finite element analysis. This paper provides an alternative to the specialized finite element formulations currently used to model incompressible materials. The finite volume methodology of computational fluid dynamics is employed in this paper to solve the Hooke’s Law equations in solid mechanics. Test
APA, Harvard, Vancouver, ISO, and other styles
9

Tsai, C. S., Yung-Chang Lin, and Wei-Chan Tsai. "Mechanical Modeling of Multiple Trench Friction Pendulum System With Multi-Intermediate Sliding Plates." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77640.

Full text
Abstract:
In order to upgrade the seismic resistibility of structures and enhance the functionality of an isolator, a new sliding type base isolator system called the multiple trench friction pendulum system (MTFPS) with multi-intermediate sliding plates is proposed. The MTFPS isolator is composed of a trench concave surface and numbers of intermediate sliding plates in each of two orthogonal directions. Mathematical formulations have been derived to examine its characteristics of the proposed MTFPS isolator. Based on mathematical formulations, it can be inferred that the natural frequency and damping e
APA, Harvard, Vancouver, ISO, and other styles
10

Lai, Heather L., Cuiyu Kuang, and Jared Nelson. "Modeling and Experimental Characterization of Viscoelastic 3D Printed Spring/Damper Systems." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-71957.

Full text
Abstract:
The development of flexible, viscoelastic materials for consumer 3D printers has provided the opportunity for a wide range of devices with damping behavior such as tuned vibration isolators to be innovatively developed and inexpensively manufactured. However, there is currently little information available about the dynamic behavior of these 3D printed materials necessary for modeling of dynamic behavior prior to print. In order to fully utilize these promising materials, a deeper understanding of the material properties, and the subsequent dynamic behavior is critical. This study evaluates th
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Modeling of the Base Isolators"

1

Mojidra, Rushil, and Keri Ryan. Influence of Vertical Ground Motion on Bridges Isolated with Spherical Sliding Bearings. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, 2019. http://dx.doi.org/10.55461/rynq3624.

Full text
Abstract:
The motivation for this project developed from testing of a full scale building isolated with triple friction pendulum bearings on the E-defense shake table in Japan. The test demonstrated experimentally that the vertical component of ground motion can amplify both the base shear and the story acceleration in the isolated building. Vertical shaking introduced high-frequency variation in the axial force of the bearings, and, consequently, a high-frequency component in the bearing lateral force, which excited higher structural modes in the building. Since vertical bridges are flexible in the ver
APA, Harvard, Vancouver, ISO, and other styles
2

Herron, J., and W. Tsang. Kinetics data base for combustion modeling. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/5417264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patzelt, Johanna, and Kurosch Thuro. Modeling of secondary stress conditions at the Brenner Base Tunnel. Cogeo@oeaw-giscience, 2011. http://dx.doi.org/10.5242/iamg.2011.0100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mamp, Michael, and Alexis Quinney. Body Scans as Base Geometry for 3D Modeling and Printing. Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-1898.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sakidja, Ridwan, Wai-Yim Ching, and Caizhi Zhou. Multi-modal Approach to Modeling Creep Deformation in Nickel-base Superalloy. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1874338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Palmer, C. E. A., R. J. Silva, and J. J. Bucher. Thermodynamic data base needs for modeling studies of the Yucca Mountain project. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/425257.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kimberlyn C. Mousseau. Strategic Plan for Nuclear Energy -- Knowledge Base for Advanced Modeling and Simulation (NE-KAMS). Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1031754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rich Johnson, Kimberlyn C. Mousseau, and Hyung Lee. Strategic Plan for Nuclear Energy -- Knowledge Base for Advanced Modeling and Simulation (NE-KAMS). Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1033891.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Neu, Richard W. Microstructure-sensitive Crystal Viscoplasticity for Ni-base Superalloys Targeting Long-term Creep-Fatigue Interaction Modeling. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1436575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dumesic, J. Experimental and kinetic modeling of acid/base and redox reaction over oxide catalysts: Annual report. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5999460.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Modeling of the Base Isolators' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography