Relevant bibliographies by topics / Modelling integrato

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Modelling integrato'

Author: Grafiati
Published: 9 March 2023
Last updated: 19 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Modelling integrato.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Modelling integrato"

1

van Dijk, Aalt D. J., and Jaap Molenaar. "Floral pathway integrator gene expression mediates gradual transmission of environmental and endogenous cues to flowering time." PeerJ 5 (April 19, 2017): e3197. http://dx.doi.org/10.7717/peerj.3197.

Full text
Abstract:
The appropriate timing of flowering is crucial for the reproductive success of plants. Hence, intricate genetic networks integrate various environmental and endogenous cues such as temperature or hormonal statues. These signals integrate into a network of floral pathway integrator genes. At a quantitative level, it is currently unclear how the impact of genetic variation in signaling pathways on flowering time is mediated by floral pathway integrator genes. Here, using datasets available from literature, we connect Arabidopsis thaliana flowering time in genetic backgrounds varying in upstream signalling components with the expression levels of floral pathway integrator genes in these genetic backgrounds. Our modelling results indicate that flowering time depends in a quite linear way on expression levels of floral pathway integrator genes. This gradual, proportional response of flowering time to upstream changes enables a gradual adaptation to changing environmental factors such as temperature and light.
APA, Harvard, Vancouver, ISO, and other styles
2

Araújo, Jussara de Loiola, and Petrina Rúbria Nogueira Avelar. "Modelagem Matemática e o Desenvolvimento do Pensamento Integral." Bolema: Boletim de Educação Matemática 36, no. 72 (2022): 239–61. http://dx.doi.org/10.1590/1980-4415v36n72a11.

Full text
Abstract:
Resumo Inspiradas por um projeto de modelagem matemática e pelas discussões teóricas que subsidiam os conceitos de pensamento numérico, pensamento geométrico e pensamento algébrico, nosso objetivo, neste artigo, é propor e caracterizar uma primeira versão de um constructo teórico denominado pensamento integral . O projeto de modelagem foi realizado por estudantes do 6º ano do Ensino Fundamental e um de seus propósitos era calcular a área superficial da lama que cobriu uma região do município de Brumadinho, em Minas Gerais, Brasil, após o rompimento da barragem de rejeitos de minério de ferro. Trata-se, portanto, de um ensaio empírico-teórico, por fundamentar-se em uma prática escolar de modelagem na educação matemática colocada em diálogo com referenciais teóricos. Mobilizamos problematizações sobre o ensino de integral, em especial a ideia de aproximação, e conceitos próprios da educação matemática na Educação Básica para, a partir da experiência no projeto de modelagem, descrever o conhecimento envolvido no cálculo de áreas de regiões com quaisquer formatos e que pode ser desenvolvido por estudantes do Ensino Fundamental.
APA, Harvard, Vancouver, ISO, and other styles
3

SOLECKA, Katarzyna. "MODELLING TOOLS TO INTEGRATE PUBLIC TRANSPORTATION." Scientific Journal of Silesian University of Technology. Series Transport 92 (September 1, 2016): 129–39. http://dx.doi.org/10.20858/sjsutst.2016.92.13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Karpenko, Oksana Oleksandrivna, Olena Mykhailivna Palyvoda, and Nataliia Mykolaivna Bondar. "MODELLING THE INTEGRAL PERFORMANCE OF TRANSPORT AND LOGISTICS CLUSTERS." SCIENTIFIC BULLETIN OF POLISSIA 2, no. 1(13) (2018): 155–60. http://dx.doi.org/10.25140/2410-9576-2018-2-1(13)-155-160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Henderson-Sellers, A. "Can we integrate climatic modelling and assessment?" Environmental Modeling & Assessment 1, no. 1-2 (1996): 59–70. http://dx.doi.org/10.1007/bf01874847.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Clarke, Richard, Tet Chuan Lee, Pavel Sumets, John Cater, and David Long. "OS2-4 Modelling Endothelial Layer Redistribution(OS2: Integrated Nano-Biomechanics)." Proceedings of the Asian Pacific Conference on Biomechanics : emerging science and technology in biomechanics 2015.8 (2015): 76. http://dx.doi.org/10.1299/jsmeapbio.2015.8.76.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mateus-Nieves, Enrique, and Wilfaver Hernández Montañez. "Modelling Improper Integrals, a Case Study." Acta Scientiae 24, no. 5 (2022): 353–76. http://dx.doi.org/10.17648/acta.scientiae.6741.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tvrdoň, J. "Reflection of globalization and integration processes." Agricultural Economics (Zemědělská ekonomika) 53, No. 2 (2008): 69–73. http://dx.doi.org/10.17221/1424-agricecon.

Full text
Abstract:
The paper deals with the modelling of globalization and integration processes which fundamentally influence enterprise functioning, subject and business forms in both the internal and external trade. Final output is the result of internationally coordinated production in many sectors. The impact of this process is that costs of inputs are minimized and intermediate products are made in different countries. As capital becomes more mobile and technology facilitates international communication, national borders become more permeable to economic activity. Economic reality that is the aim of this modelling is changing and due to this it is necessary to adjust modelling techniques analysed in this paper.
APA, Harvard, Vancouver, ISO, and other styles
9

Bienaymé, O. "Integrals of motion for non-axisymmetric potentials." Astronomy & Astrophysics 627 (July 2019): A123. http://dx.doi.org/10.1051/0004-6361/201935573.

Full text
Abstract:
Context. The modelling of stationary galactic stellar populations can be performed using distribution functions. Aims. This paper aims to write explicit integrals of motion and distribution functions. Methods. We propose an analytic formulation of the integrals of motion with an explicit dependence on potential. This formulation applies to potentials with rotational symmetry or triaxial symmetry. It is exact for Stäckel potentials and approximate for other potentials. Results. Modelling a stationary stellar population using these integrals of motion allows the force field to be found with satisfactory accuracy. On the other hand, the mass density distribution that generates the force field and the gravitational potential is recovered with less accuracy due to lower precision in modelling box-type orbits.
APA, Harvard, Vancouver, ISO, and other styles
10

Umavezi, Joshua Uzezi, and Bowale Odukale. "API Development and Modelling: Streamlining Financial Technology Integration for Seamless Digital Transactions." International Journal of Research Publication and Reviews 6, no. 1 (2025): 1556–73. https://doi.org/10.55248/gengpi.6.0125.0328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Modelling integrato"

1

CASIRAGHI, IRENE. "First principle based integrated modelling in support of the Divertor Tokamak Test facility design." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2023. https://hdl.handle.net/10281/402360.

Full text
Abstract:
Nel programma di ricerca europeo per la fusione termonucleare controllata sono stati definiti otto differenti obiettivi a lungo termine. Una di queste sfide cruciali riguarda lo smaltimento (exhaust) di particelle ed energia provenienti da un reattore a fusione. Per sviluppare e testare delle strategie alternative atte a risolvere il problema dell'exhaust, una nuova macchina sperimentale è attualmente in costruzione in Italia a Frascati presso il centro di ricerca ENEA: il Divertor Tokamak Test facility (DTT). Per progettare un nuovo tokamak sono richiesti sforzi congiunti di fisici ed ingegneri. Al fine di ridurre i costi e minimizzare i rischi, uno strumento essenziale è la modellizzazione integrata il più completa possibile basata su principi primi. Il presente progetto di dottorato è incentrato sullo sviluppo di simulazioni multi-canale basate sulla fisica dei principali scenari operazionali di riferimento di DTT. Modelli all'avanguardia di trasporto, riscaldamento, fuelling ed equilibrio magnetico vengono integrati in queste simulazioni per predire in modo auto-consistente profili di plasma e parametri di scenario. Vengono anche calcolate tutte le interazioni non lineari tra sistemi di riscaldamento e plasma e tra i diversi canali di trasporto. Durante questo lavoro, le simulazioni di DTT sono state progressivamente migliorate perfezionandone le impostazioni e includendo un crescente numero di aspetti grazie all'aggiunta di codici appositi. Inoltre sono stati inclusi man mano aggiornamenti dei sistemi di riscaldamento, dell'equilibrio magnetico e della configurazione della macchina per seguire l'evoluzione del progetto. Il confronto tra simulazioni analoghe con differenti modelli quasi-lineari di trasporto ci rende fiduciosi dell'affidabilità dei profili di plasma predetti e ci permette di identificare i punti deboli dei modelli nei vari regimi in cui opera DTT. Questi modelli quasi-lineari sono stati inoltre validati mediante simulazioni girocinetiche nel range di parametri di DTT. L'accuratezza delle predizioni è state migliorata in modo ricorsivo accordando le condizioni al contorno delle simulazioni di core e delle simulazioni del SOL, garantendo così una consistenza core-edge-SOL. Abbiamo studiato lo scenario a massime performance per guidare la progettazione della macchina e il primo plasma e gli scenari intermedi per assistere le fasi iniziali. Le performance dello scenario a piena potenza è stato testato con nove differenti opzioni di riscaldamento allo scopo di selezionare la distribuzione di potenza ottimale tra i tre sistemi di riscaldamento ausiliario. È stata poi verificata la compatibilità dello scenario a piena potenza con le capacità del sistema di bobine elettromagnetiche. Inoltre per la prima volta sono stati stimati, nello scenario a massima potenza, i denti di sega e gli ELMs di DTT. Un'analisi delle prestazioni richieste ai sistemi di fuelling per sostenere gli alti profili di densità ha dimostrato che sarebbe insufficiente utilizzare solamente un sistema di gas puffing e che sono necessari pellet di deuterio per alimentare DTT. Sono stati stimati i tassi di emissione neutronica, risultando compatibili con il progetto attuale delle schermature neutroniche. Questo progetto di dottorato ha portato all'ottimizzazione delle dimensioni della macchina e alla definizione delle potenze di riferimento dei sistemi di riscaldamento e ha fornito i profili di riferimento per la progettazione delle diagnostiche, la stima delle rese neutroniche, il calcolo delle perdite di particelle veloci, i requisiti del gas puffing e/o dei pellet per il fuelling, valutazioni MHD e altri lavori.<br>The European research roadmap towards thermonuclear fusion energy defined eight different missions to guide the long–term programme. One of these crucial challenges is the controlled power and particle exhaust from a fusion reactor. To develop and test alternative strategies to solve the exhaust problem, in Italy a new experimental device is now under construction at the ENEA Research Center in Frascati: the Divertor Tokamak Test facility (DTT). Designing a new tokamak requires concerted efforts of physicists and engineers. To reduce costs and minimise risks, a first–principle based integrated modelling as comprehensive as possible of plasma discharges is an essential tool. The focus of this PhD project was to perform the first physics–based multi–channel simulations of the main baseline operational scenarios of DTT. In these simulations state–of–art modules for transport, heating, fuelling, and magnetic equilibrium are integrated to achieve self–consistent predictions of plasma profiles and scenario parameters. All non–linear interactions between heating and plasma and between the different transport channels are also calculated. During this work, the DTT simulations have been progressively enhanced adding codes to include a growing number of aspects and refining run settings. Moreover, updates of the heating systems, magnetic equilibria, and device configuration have been included to comply with the evolving machine design. The comparison among analogous simulations with different quasi–linear transport models made us confident in the reliability of the predicted plasma profiles and allowed us to identify the weak points of the models in the various DTT operational regimes. A validation of these quasi–linear models against the gyrokinetic simulations in the specific DTT range of parameters was also performed. The prediction accuracy has been improved recursively by matching the core and SOL simulation boundary conditions to guarantee the core–edge–SOL consistency. We investigated the full performance scenario to guide the machine design, and the first plasma and intermediate scenarios to assist the commissioning phases. The full performance scenario was tested with nine different heating mix options to select the optimal power distribution amongst the three auxiliary heating systems. The compatibility of the full power scenario with the electromagnetic coil system capabilities was then verified. In addition, the DTT sawteeth and ELMs during the full power scenario were estimated for the first time. An analysis of the required fuelling system performance to sustain the high density profiles proved that only the gas puffing system would be insufficient and that deuterium pellets are needed for the DTT fuelling. Neutron rates were evaluated and found compatible with the present design of the neutron shields. This PhD modelling work led to the optimisation of the device size and of the reference heating mix, and provided reference profiles for diagnostic system design, estimates of neutron yields, calculations of fast particle losses, gas puffing and/or pellet requirements for fuelling, MHD evaluations, and other tasks.
APA, Harvard, Vancouver, ISO, and other styles
2

Dickinson, Alex. "Complexity management and modelling of VLSI systems." Title page, contents and abstract only, 1988. http://web4.library.adelaide.edu.au/theses/09PH/09phd553.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fares, Julian. "Modelling Stakeholder Integration Using Social Networks: An Australian Integrated Health Care Project." Thesis, The University of Sydney, 2019. http://hdl.handle.net/2123/20455.

Full text
Abstract:
Stakeholders form relationships in projects to achieve both personal and project objectives. Proper stakeholder identification, categorisation and engagement methods that capture the social processes of the stakeholder network environment are lacking in many project management standards. In this study, social network theories and analytics are introduced as a new lens for stakeholder analysis to examine an integrated network of health care stakeholders (health care services and providers) that provides care for patients. The aim is to identify influential key stakeholders and determine the optimal network structure and composition for stakeholder integration (integrated care). A quantitative, whole network study was conducted where 56 health care providers were asked to report on their network relationships and the extent to which services are integrated in a geographic region in NSW, Australia. The results show that social network structure, position and relation constructs have a vital role in integrating health care stakeholders. More precisely, it was shown that ego-density, degree and betweenness centrality, tie strength and functional diversity have a positive association with service integration. In contrast, network efficiency, constraint and reciprocated relationships were found to be negatively associated with service integration. The research implications for the project management community are that stakeholders can be analysed and managed according to their relational attributes. With respect to integrated care, all stakeholders involved in integrated care projects should consider relationships configurations in their integration endeavour. Social network analysis is shown to be a vital tool for evaluating service integration where it identifies which services are currently working together; which ones are not working with others; where are the gaps in the relationships that can be strengthened and addressed.
APA, Harvard, Vancouver, ISO, and other styles
4

Anjos, Angélica dos. "Comparação de ferramentas para modelamento de indutores na tecnologia CMOS." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-27072007-145121/.

Full text
Abstract:
Duas ferramentas para modelamento de indutores planares, retangulares e integrados e as equações analíticas implementadas em um software, foram estudadas e analisadas, para determinar qual é a mais apropriada, ou seja, aquela que fornece os resultados mais próximos de medidas experimentais, com menor custo, maior velocidade, etc. Indutores planares integrados apresentam limitações severas em seu uso. As duas principais são: o baixo valor do fator de qualidade, que limita o ganho e a banda nos amplificadores e filtros que os utilizam; e a dificuldade no seu modelamento e na determinação dos parâmetros que os caracterizam. Apesar das dificuldades no uso destes dispositivos, eles são aplicados em diversos sistemas, tais como transceptores que operam em rádio freqüências. Nestes sistemas, indutores são necessários e sua integração é essencial para se obter soluções completamente integradas. As ferramentas estudadas para o modelamento de indutores neste trabalho foram: ASITIC e SONNET. As equações analíticas foram implementadas no MATLAB. A comparação entre as ferramentas e as equações foi feita por meio de cinco indutores construídos e medidos. Os indutores foram fabricados em tecnologia CMOS de 0,35 µm com quatro camadas de metal. Para realizar a correta comparação entre os resultados simulados e as medidas elétricas, reduzindo ao máximo a interferência de elementos parasitas (inclusos pelos pads), os indutores foram inseridos em estruturas de teste. Estruturas de caracterização apropriadas foram também projetadas para permitir a eliminação do efeito das estruturas de teste sobre as medidas.<br>Two modeling tools for integrated planar square inductors and one software implementing analytical relations, were studied and analyzed, to determine which is the most appropriate, that is, the tools that will supply the closest results to experimental measurements with, lower costs, higher speed, etc. Integrated planar inductors present severe limitations in their use. The two main limitations are: the low value of the quality factor, that affects the gain and the band of amplifiers and filters where they are used; and the difficulty in modeling and determining of their parameters. Inspire of the difficulties in the use of these devices, they are applied in many systems, such as transceivers that operate in radio frequency. In these systems, inductors are necessary and their integration is essential to obtain completely integrated solutions. In this work the studied tools for inductor modeling were: ASITIC and SONNET. The analytical relations were implementing in MATLAB. The comparisons between the tools were made through five implemented and measured inductors. The inductors were fabricated in a CMOS 0.35 µm technology with four metal layers. In order to carry out the correct comparison between the modeled results and the electric measurements, minimizing the interference of pad parasitic elements, the inductors were inserted within appropriate test structures. Characterization structures were also implemented to allow the elimination of the test structure effects on the measurements.
APA, Harvard, Vancouver, ISO, and other styles
5

Bishop, Gregory Raymond H. ""On stochastic modelling of very large scale integrated circuits : an investigation into the timing behaviour of microelectronic systems" /." Title page, contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09PH/09phb6222.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tenenbaum, David Elliot. "RAIMEnt, RHESSys/Arcview integrated modelling environment." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0010/MQ40760.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sampson, G. "Modelling of integrated waste management systems." Thesis, Cranfield University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Purwantoro, Yudi. "Integrated and systematic modelling of reliability." Thesis, University of Sheffield, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251346.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Christie, Robert. "Propulsion system integration and modelling synthesis." Thesis, Cranfield University, 2016. http://dspace.lib.cranfield.ac.uk/handle/1826/11711.

Full text
Abstract:
Concerns over fuel costs, along with the ever increasing requirement to reduce the impact of emissions, means that the world's airlines continue to introduce low-noise and more fuel-efficient aircraft into their fleet. Increasing the engine bypass ratio is one way to improve propulsive efficiency. However, historically an increase in the bypass ratio (BPR) has usually been associated with an increase in the fan diameter. Consequently, there can be a notable increase in the impact of the engine installation on the overall aircraft performance. For example, although the typical increase in fan diameter is generally beneficial to the uninstalled engine specific fuel consumption, the increase in the nacelle drag and weight are detrimental to the aircraft performance. There is also likely to be a stronger aerodynamic coupling between the engine and the airframe. Overall there is a risk that the gains in uninstalled engine performance are wholly or partly lost due to adverse engine-airframe installation and interference effects as well as additional nacelle weight. It is clear that the quantification of the elements of installation drag is a key aspect in the assessment of the likely developments in engine design as well as on the installation requirements for future airframe architectures. The overall aim of this research is to determine the effect of nacelle size, weight, geometry and installation on flight efficiency. This aim has been addressed through the development of a framework which combines the engine thermodynamic model, aircraft performance, engine installation aspects and a flight trajectory approach. This framework has been developed to assess the relative importance of various engine installation aspects on the overall flight fuel burn for a range of short-haul and long-haul configurations.
APA, Harvard, Vancouver, ISO, and other styles
10

Vacharaphol, Oratai. "Extended modelling methodology to facilitate integrated decision making in manufacturing enterprises." Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/12521.

Full text
Abstract:
This research has highlighted the importance of the multiple roles in design and change organizations and the benefits to have quantitative tools and qualitative tools to support decision making. Hence the aims and objectives of this research are a model driven approach to support integrated decision making in MEs. The author has identified a gap in the lack of a systematic way to model MEs to facilitate integrated decision making. Initial Modelling Methodology (IMM) has been established based on Manufacturing System Integration (MSI) group at Loughborough University so that improvement of this methodology can be investigated to facilitate integrated decision making. Artwork is an industrial furniture manufacturer based in Loughborough and is used as the company case study of this research. IMM has been tested in exploratory research case 1 at a low level of production at Artwork. The experimentations of case 1 have been carried out to study the impact of product volume and variety on specific process section at low level. The result has shown that IMM lacks the ability to facilitate integrated decision making aspect and it can be developed to achieve aims and objectives. This leads to additional concepts of (1) modelling at different level of abstraction to realise the benefit of multiple levels of modelling, (2) deploying the improved views of W, P and R sub-systems to assist in exercising simulation modelling and (3) identifying possible users in planning with scope and focus of decision making. These three concepts were added into IMM and known as Extended Modelling Methodology (EMM). The EMM has been tested in exploratory research case 2 at a mid-level of production system at Artfrom with four types of experimentations: 1) balancing resources of production system, 2) demand change, 3) rework impact and 4) delay impact. The evaluation of results has shown a systematic way of the EMM to facilitate decision making individually and collectively. Therefore the overall research contributions are a new model driven approach to support conceptual design and change of manufacturing systems in aspect of integrated decision making. However, limitations of this research can be addressed as limited availability of data, range and detail of case studies and limited range of modelling techniques explored here. It follows that scopes of future works are utilization of EMM in other domains, consideration of other reference models, investigation of EMM in other company case studies and establishment of a comprehensive database applied in EMM and development of coherent simulation models. In addition, this thesis has also presented ongoing research on developing and testing EMM in another company case study in aircraft engine manufacturer.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Modelling integrato"

1

L, Engl W., ed. Process and device modelling. North-Holland, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Spur, Günter. Integrated enterprise modelling. Beuth Verlag GmbH, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nassar, Raja. Modelling of Microfabrication Systems. Springer Berlin Heidelberg, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

International Workshop on Power and Timing Modelling and Optimization (3rd 1993 La Grande Motte, France). Power and timing modelling for performance of integrated circuits: Proceedings of the Third International Workshop on Power and Timing Modelling and Optimization (PATMOS '93), Oct. 11-12, 1993, La Grande Motte, France. IT Press Verlag, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Constantin, Zopounidis, ed. New operational approaches for financial modelling. Physica-Verlag, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International Workshop on Designing for Yield (1987 Oxford, England). Yield modelling and defect tolerance in VLSI: Papers presented at the International Workshop on Designing for Yield, Oxford, 1-3 July 1987. A. Hilger, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Willenbockel, Dirk. Applied general equilibrium modelling: Imperfect competition and European integration. Wiley, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Krister, Ståhlberg, and Forskningsprogrammet Norden og Europa, eds. Den nordiska modellen i en brytningstid. Nordisk Ministerråd, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Peter, Conradi. Reuse in electronic design: From information modelling to intellectual properties. Wiley, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

F, Gielingh W., Suhm A. K, and Böhms Michael, eds. IMPPACT reference model: An approach to integrated product and process modelling for discrete parts manufacturing. Springer-Verlag, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Modelling integrato"

1

Wallman, Patrik, Harald Sverdrup, Mats G. E. Svensson, and Mattias Alveteg. "Integrated modelling." In Developing Principles and Models for Sustainable Forestry in Sweden. Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-015-9888-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Miles, Ian, Ozcan Saritas, and Alexander Sokolov. "Integration: Modelling." In Foresight for Science, Technology and Innovation. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32574-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rotmans, J., and M. van Asselt. "Integrated Assessment Modelling." In Advances in Global Change Research. Springer Netherlands, 1999. http://dx.doi.org/10.1007/0-306-47982-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Newman, K. B., S. T. Buckland, B. J. T. Morgan, et al. "Integrated Population Modelling." In Modelling Population Dynamics. Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0977-3_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Singh, Vijay P., Rajendra Singh, Pranesh Kumar Paul, Deepak Singh Bisht, and Srishti Gaur. "Integrated Modelling Systems." In Water Science and Technology Library. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1316-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Edwards, Dilwyn, and Michael Hamson. "Modelling with Integration." In Mathematical Modelling Skills. Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13250-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vernadat, F. B. "Enterprise Modelling Languages." In Enterprise Engineering and Integration. Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60889-6_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Krug, W., and H. W. Eberl. "CAE and Product Modelling." In Computer Integrated Manufacturing. Springer London, 1991. http://dx.doi.org/10.1007/978-1-4471-3257-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Drakatos, P., E. Sotiropoulos, and A. Dentsoras. "Modelling a Belt Conveyor." In Computer Integrated Manufacturing. Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-83590-2_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Khoury, Richard, and Douglas Wilhelm Harder. "Integration." In Numerical Methods and Modelling for Engineering. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21176-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Modelling integrato"

1

Laxminarayan, Sidharth, Lily Cheung, and Fani Boukouvala. "Integrated hybrid modelling of lignin bioconversion." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.180358.

Full text
Abstract:
Global biomanufacturing is projected to expand rapidly in the coming decade due to advancements in DNA sequencing and manipulation. However, the complexity of cellular behaviour introduces difficulty in modelling and optimizing biomanufacturing processes. Phenomenological models that represent the physics of the system in empirical equations suffer from poor robustness, while their machine learning (ML) counterparts suffer from poor extrapolative capability. On the other hand, hybrid models allow us to leverage both physical constraints and the flexibility of ML. This work describes a new approach for hybrid modeling that integrates the time-variant parameter estimation and ML model training into a singular step. We implement this approach on a proposed scheme for the cell-mediated conversion of a lignin derivative into a bioplastic precursor and show that our integrated hybrid model outperforms the traditional two-step hybrid, phenomenological, and ML model counterparts. Lastly, we demonstrate how to execute an interpretability analysis on the ML component of the integrated hybrid model to reveal new physical insights that are then used to further improve model performance.
APA, Harvard, Vancouver, ISO, and other styles
2

Pandey, Gaurav, Muhammad Imran, Claudio Porzi, Antonio Malacarne, Paolo Ghelfi, and Antonella Bogoni. "Modelling Tunable Integrated Optoelectronic Oscillators." In 2024 Italian Conference on Optics and Photonics (ICOP). IEEE, 2024. https://doi.org/10.1109/icop62013.2024.10803643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Data integration technologies to support integrated modelling." In 20th International Congress on Modelling and Simulation (MODSIM2013). Modelling and Simulation Society of Australia and New Zealand (MSSANZ), Inc., 2013. http://dx.doi.org/10.36334/modsim.2013.keynote.knapen.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kruzel, Filip, and Mateusz Nytko. "Analysis of performance differences of fem numerical integration algorithm on two generations of intel xe-lp gpus." In 38th ECMS International Conference on Modelling and Simulation. ECMS, 2024. http://dx.doi.org/10.7148/2024-0208.

Full text
Abstract:
This article analyses the performance differences between two generations of integrated GPUs on the Finite Element Method (FEM) Numerical Integration Algorithm. The algorithm employs linear approximation in the convection-diffusion problem, where performance is highly memory-dependent. We used Intel 11th and 12th-generation processors with integrated GPUs based on Intel Xe-LP architecture to conduct our research. The GPUs have the same parameters except for the slightly lower bandwidth and a narrower bus in the newer architecture. This makes it an ideal choice to test the significance of the performance loss in the highly-parallel memory-bound algorithm. We also compare the two generations of GPUs in terms of their computational power, memory access patterns, and other relevant factors to identify all the sources of performance loss. Our research shows how a slight change in one parameter can affect the overall performance of an algorithm. Our experiments aim to provide insight into how different GPU architectures and generations affect FEM numerical integration performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Bobkowska, Katarzyna, Jakub Szulwic, Paweł Tysiac, and Patryk Ziółkowski. "GIS three-dimensional Modelling with geo-informatics techniques." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.167.

Full text
Abstract:
The integration issue of virtual models and geo-referenced database have a very broad spectrum of potential applications. Before the integration issue was on the cusp, it was quite problematic to combine three-dimensional models with the geo-referenced database. An integrated database contains a variety of data including such as object orientated data model and raster data. Within this paper, authors present an integration process aiming to make real virtual GIS database which includes the creation of structures, such as bridges, buildings, roads and terrain formations. To create a three-dimensional GIS model high-resolution satellite images/point cloud has been used. For 3D modelling and reconstruction purposes, The Blender program has been used since the software provides with quick workflow and userfriendly interface. As a result of this study authors concede that integrated techniques for three-dimensional GIS databases allow conducting easy as well as sophisticated operation in an efficient and non-time consuming way. The subject holds great promise for a future, current challenges focusing on new approaches for conjectures of spatial objects that will be used to boost the capabilities for automatic visualization.
APA, Harvard, Vancouver, ISO, and other styles
6

Kawar, R. "Integrated Scaled Modelling." In 75th EAGE Conference and Exhibition - Workshops. EAGE Publications BV, 2013. http://dx.doi.org/10.3997/2214-4609.20131277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tiwari, Pankaj Kumar, M. Amir Rashidi, Debasis Priyadarshan Das, et al. "Embedding CO2 Leakage Modelling in MMV Planning for Marine Environmental Risks in an Offshore CCS Application." In ADIPEC. SPE, 2022. http://dx.doi.org/10.2118/210832-ms.

Full text
Abstract:
Abstract Carbon Capture and Sequestration (CCS) has potential to provide an amicable solution in reducing CO2 emissions to the atmosphere for perpetuity with zero-degree failure. Geological storage sites are conventionally considered to be safe for CO2 sequestration and are thoroughly simulated for any potential leakage due to loss of structural integrity. The offshore CO2 storage site, if leaks, could potentially affect the marine environment eventually escaping into atmosphere. A prior modelling of potential leakage from identified threats and its impact on marine environment will ensure the safety and substantially aid site- specific and adaptive Monitoring, Measurement &amp; Verification (MMV) planning. Subsurface integrity study of the storage site integrated with coupled modelling contemplates longterm security of CO2 storage. For a leak to occur through the plugged &amp;abandonment (P&amp;A) wells, one or more barriers must fail. P&amp;A wells integrity feasibility reveals the impact of CO2 interaction with non- CRA composite structure identifying possible leak paths. The probability of a leak from subsurface to the environment through each of the P&amp;A well, depending on its attribution, was estimated. Barrier's failure probabilities in P&amp;A wells are understood under various well leak estimation scenarios. Range of potential leakage rate, in the event of loss of well integrity, was evaluated. To demonstrate the impact of potential CO2 leakage in marine environment through the loss of subsurface or well integrity from identified locations, integrated CO2 dispersion simulation was carried out for multiple potential leakage scenarios and changes in marine water pH were analyzed. Based on barriers reliability function, the well leakage modelling results suggest that minimum rate of CO2 leakage through the well path that can possibly reach to the seabed is 6-10 tCO2e/year and for extreme case it would be 500 tCO2e/year. The CO2 dispersion modelling were performed for these leakage rates at three different well locations. Three scenarios were considered and simulated for escaped CO2 gas in the water column and its impact on marine environment. The observed change in marine water pH values in near and far-field region were negligible or undetectable. Any reduction in the pH values was predicted to be within the natural variation of the seawater acidity at the storage site with the varying climatic conditions. The CO2 gas bubbles were predicted to be fully dissolved in the water column, no CO2 gas bubbles would reach the surface and escape into the atmosphere for the modelled leakage scenarios in water depths of 140m. In this paper, the integration of well leakage rate modelling with CO2 dispersionsimulation results are discussed to ameliorate the MMV planning for legacy wells to ensure that injected CO2 in the reservoir is intact and safely stored for hundreds of years post injection.
APA, Harvard, Vancouver, ISO, and other styles
8

Chidambaram, Prasanna, Pankaj Kumar Tiwari, Parimal A. Patil, et al. "Importance of 3-Way Coupled Modelling for Carbon Dioxide Sequestration in Depleted Reservoir." In SPE Annual Technical Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/206156-ms.

Full text
Abstract:
Abstract Carbon sequestration is the process of capturing and storage of atmospheric carbon dioxide. The objective of any carbon sequestration project is to store CO2 safely for hundreds or thousands of years with a goal of reducing global climate change. A depleted hydrocarbon reservoir is one of the potential storage sites being considered for long-term CO2 storage. The dynamic, geochemical, and geomechanics changes that occur during CO2 injection are inter-related. For example, when injected CO2 causes dissolution of reservoir rock, on one hand, porosity increases while rock strength decreases. On the other hand, reduced rock strength could cause additional compaction thus reducing porosity, whereas increase in pressure due to injection could cause dilation. Hence, it is critical to have an integrated model that captures effect of all changes on the storage capacity and integrity of the reservoir. Three major depleted gas reservoirs in Central Luconia field, located offshore Sarawak, are being evaluated for future CO2 storage. A 3-way coupled modelling approach that integrates dynamic model, geochemistry model, and geomechanics model is utilized to obtain cumulative effect of all three changes. This integrated model provides a more accurate estimate of 1) CO2 storage capacity, 2) Caprock integrity evaluation, 3) CO2 plume migration path, and 4) Volume of CO2 stored through different storage mechanisms (viz. hydrodynamic trapping, capillary trapping, solubility trapping, and mineral trapping). Apart from providing storage capacity, this model also provides inputs for evaluating integrity of caprock, fault reactivation study, MMV (Measurement, Monitoring, and Verification) planning, and estimating potential leak rates through plugged and abandoned wells. Using a 3-way coupled model, it is estimated that there is an average reduction in porosity of 5-10% (of initial porosity). This translates to an equivalent reduction in CO2 storage capacity of 5-10% compared to dynamic model. It is observed that pore collapse as a result of pressure depletion is primarily responsible for this reduction in porosity. It has also been observed that the injection can be continued till initial reservoir pressure is reached without breaching caprock integrity. CO2 plume migration path significantly affects MMV planning. Potential leak rate estimation is critical in mitigation and contingency planning.
APA, Harvard, Vancouver, ISO, and other styles
9

Ng, Clement Kok Peng, Rena Alia Ramdzani, and Yong Han Seah. "Triumph of The Digital Twin Frontier: An Odyssey Unleashing Integrated Asset Modelling for Intelligent Well & Reservoir Management." In APOGCE 2024. SPE, 2024. http://dx.doi.org/10.2118/221153-ms.

Full text
Abstract:
Abstract Mubadala Energy commenced the Intelligent Well/Reservoir Management digital project initiative in mid-May 2023, spearheaded by the Subsurface team in collaboration with SLB Digital &amp; Integration Team. The goal of the Intelligent Well/Reservoir Management digital project was to create a digital twin version of the offshore platform and to incorporate automated modelling features into the digital twin. Mubadala Energy operated field, "LFS" in Malaysia was selected as the candidate for involvement with this digital project. Mubadala Energy operates the "LFS" field in Central Luconia, off the coast of Sarawak, Malaysia. The "LFS" field is a gas condensate reservoir that started production in early 2022 and produces up to a daily gas production of 600 MMscf/d. The key technical aims for this digitalization project are to perform analytics to manage the subsurface uncertainties and to promote prudent reservoir management practices. The expectation of the business unit is to have a seamless integrated production modelling system from the reservoir to the export stream. Coupled with such initiatives, the project encompasses mainly building physics models for Subsurface, Production and Facilities, and integrating them into a common platform. These three key components of Subsurface, Production and Facilities domain each constitute their own dedicated calibrated model. The challenge is then to ensure that the integrated model platform is seamless, customizable and operationally functional. This paper presents the layout of the overall digitalization project for a new producing field and highlights the key architecture of an "intelligent" integration of asset modelling from both the operator and technology provider's perspectives, providing a holistic and balanced view to the reader. The business driver is to maximize operational efficiency and to create a safe operating environment using digitalization tools. This paper details the intelligent well and reservoir modelling steps, which consists of an Automated Objectives-Driven Workflow (AODW) and explains how these workflows are implemented in a real producing asset environment. From a broader overview perspective, the digitalization project involves integrating various tools into a common platform (i.e., Integrated Asset Modelling - IAM) and creating automated workflows to assist the asset team in well and reservoir management. The paper will also describe how the IAM model is further incorporated into the existing database system of a producing field that utilizes PI information, and subsequently how all these information is then migrated and displayed in a customized Asset Overview (AO) Dashboard. Using the IAM and AO tools, the authors will demonstrate how these tools are being employed for production forecasting and reservoir surveillance purposes. In addition, this paper outlines tangible operational benefits from having an integrated asset modelling tool and finally will highlight some key lessons learned. With the sharing of this information and experience, the authors hope to advance the knowledge bank of the petroleum engineering community. For the Subsurface modelling scope, an updated numerical reservoir model was constructed with the objective to mimic the behaviour of "LFS" field and to generate production forecasts for this field. This reservoir model was built with existing wells coupled with an infill well and was historically matched against actual field production data. The output from the reservoir model was then fed into the production network model. At this stage, a production network model was built to commingle all the reservoir and well production streams into a single stage production separator/sink. Subsequently, the production network model output was then fed into a surface engineering process simulator which, allows a classical surface process engineering material and energy balance simulation to be carried out. The integration of all the Subsurface, Production and Surface model was attained through an Integrated Asset Modelling tool (IAM). In this case, the IAM is utilized to map and integrate all the Subsurface, Production and Facility models which led to the creation of a powerful integrated asset management tool. Towards this end, real-time insights are achieved through the digital twin solution via an Asset Overview dashboard display, enabling stakeholders to access real-time information on asset performance through immediate data exchange, which marks Mubadala Energy's first-ever digital field deployment.
APA, Harvard, Vancouver, ISO, and other styles
10

Kruzel, Filip, and Mateusz Nytko. "Exploring The Benefits Of OpenCL Shared Virtual Memory: A Comparative Analysis On Integrated And External GPUs." In 37th ECMS International Conference on Modelling and Simulation. ECMS, 2023. http://dx.doi.org/10.7148/2023-0117.

Full text
Abstract:
In this article, we test the feature of using a Shared Virtual Memory in OpenCL on Intel Iris Xe and Nvidia GeForce RTX 3060 GPUs. The first of these architectures is integrated into the CPU, so by definition, it uses the same RAM as the CPU. The second one uses a PCI-Express connection to transfer data between computer memory and separate GPU memory. OpenCL Shared Virtual Memory (SVM) feature allows zero-copy mechanisms to use the same address space for the CPU and Accelerator. In this work, the authors test the differences between classical implementations of the FEM numerical integration algorithm on GPU with explicit data sending between CPU and Accelerator and the SVM implementation with the transfer hidden from the user. Research should answer whether the advantages of using a weaker integrated card with faster data transfer will overcome the external graphics card's connection bottleneck.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Modelling integrato"

1

Lagerwerf, Lotte, Jan Huijsmans, Jouke Oenema, et al. Integrale modellering van emissies in de melkveehouderij : Metingen vs modellen. Wageningen Livestock Research, 2022. http://dx.doi.org/10.18174/579200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

de Kemp, E. A., H. A. J. Russell, B. Brodaric, et al. Initiating transformative geoscience practice at the Geological Survey of Canada: Canada in 3D. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/331097.

Full text
Abstract:
Application of 3D technologies to the wide range of Geosciences knowledge domains is well underway. These have been operationalized in workflows of the hydrocarbon sector for a half-century, and now in mining for over two decades. In Geosciences, algorithms, structured workflows and data integration strategies can support compelling Earth models, however challenges remain to meet the standards of geological plausibility required for most geoscientific studies. There is also missing links in the institutional information infrastructure supporting operational multi-scale 3D data and model development. Canada in 3D (C3D) is a vision and road map for transforming the Geological Survey of Canada's (GSC) work practice by leveraging emerging 3D technologies. Primarily the transformation from 2D geological mapping, to a well-structured 3D modelling practice that is both data-driven and knowledge-driven. It is tempting to imagine that advanced 3D computational methods, coupled with Artificial Intelligence and Big Data tools will automate the bulk of this process. To effectively apply these methods there is a need, however, for data to be in a well-organized, classified, georeferenced (3D) format embedded with key information, such as spatial-temporal relations, and earth process knowledge. Another key challenge for C3D is the relative infancy of 3D geoscience technologies for geological inference and 3D modelling using sparse and heterogeneous regional geoscience information, while preserving the insights and expertise of geoscientists maintaining scientific integrity of digital products. In most geological surveys, there remains considerable educational and operational challenges to achieve this balance of digital automation and expert knowledge. Emerging from the last two decades of research are more efficient workflows, transitioning from cumbersome, explicit (manual) to reproducible implicit semi-automated methods. They are characterized by integrated and iterative, forward and reverse geophysical modelling, coupled with stratigraphic and structural approaches. The full impact of research and development with these 3D tools, geophysical-geological integration and simulation approaches is perhaps unpredictable, but the expectation is that they will produce predictive, instructive models of Canada's geology that will be used to educate, prioritize and influence sustainable policy for stewarding our natural resources. On the horizon are 3D geological modelling methods spanning the gulf between local and frontier or green-fields, as well as deep crustal characterization. These are key components of mineral systems understanding, integrated and coupled hydrological modelling and energy transition applications, e.g. carbon sequestration, in-situ hydrogen mining, and geothermal exploration. Presented are some case study examples at a range of scales from our efforts in C3D.
APA, Harvard, Vancouver, ISO, and other styles
3

de Kemp, E. A., H. A. J. Russell, B. Brodaric, et al. Initiating transformative geoscience practice at the Geological Survey of Canada: Canada in 3D. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331871.

Full text
Abstract:
Application of 3D technologies to the wide range of Geosciences knowledge domains is well underway. These have been operationalized in workflows of the hydrocarbon sector for a half-century, and now in mining for over two decades. In Geosciences, algorithms, structured workflows and data integration strategies can support compelling Earth models, however challenges remain to meet the standards of geological plausibility required for most geoscientific studies. There is also missing links in the institutional information infrastructure supporting operational multi-scale 3D data and model development. Canada in 3D (C3D) is a vision and road map for transforming the Geological Survey of Canada's (GSC) work practice by leveraging emerging 3D technologies. Primarily the transformation from 2D geological mapping, to a well-structured 3D modelling practice that is both data-driven and knowledge-driven. It is tempting to imagine that advanced 3D computational methods, coupled with Artificial Intelligence and Big Data tools will automate the bulk of this process. To effectively apply these methods there is a need, however, for data to be in a well-organized, classified, georeferenced (3D) format embedded with key information, such as spatial-temporal relations, and earth process knowledge. Another key challenge for C3D is the relative infancy of 3D geoscience technologies for geological inference and 3D modelling using sparse and heterogeneous regional geoscience information, while preserving the insights and expertise of geoscientists maintaining scientific integrity of digital products. In most geological surveys, there remains considerable educational and operational challenges to achieve this balance of digital automation and expert knowledge. Emerging from the last two decades of research are more efficient workflows, transitioning from cumbersome, explicit (manual) to reproducible implicit semi-automated methods. They are characterized by integrated and iterative, forward and reverse geophysical modelling, coupled with stratigraphic and structural approaches. The full impact of research and development with these 3D tools, geophysical-geological integration and simulation approaches is perhaps unpredictable, but the expectation is that they will produce predictive, instructive models of Canada's geology that will be used to educate, prioritize and influence sustainable policy for stewarding our natural resources. On the horizon are 3D geological modelling methods spanning the gulf between local and frontier or green-fields, as well as deep crustal characterization. These are key components of mineral systems understanding, integrated and coupled hydrological modelling and energy transition applications, e.g. carbon sequestration, in-situ hydrogen mining, and geothermal exploration. Presented are some case study examples at a range of scales from our efforts in C3D.
APA, Harvard, Vancouver, ISO, and other styles
4

Nechaev, V., Володимир Миколайович Соловйов, and A. Nagibas. Complex economic systems structural organization modelling. Politecnico di Torino, 2006. http://dx.doi.org/10.31812/0564/1118.

Full text
Abstract:
One of the well-known results of the theory of management is the fact, that multi-stage hierarchical organization of management is unstable. Hence, the ideas expressed in a number of works by Don Tapscott on advantages of network organization of businesses over vertically integrated ones is clear. While studying the basic tendencies of business organization in the conditions of globalization, computerization and internetization of the society and the results of the financial activities of the well-known companies, the authors arrive at the conclusion, that such companies, as IBM, Boeing, Mercedes-Benz and some others companies have not been engaged in their traditional business for a long time. Their partner networks performs this function instead of them. The companies themselves perform the function of system integrators. The Tapscott’s idea finds its confirmation within the framework of a new powerful direction of the development of the modern interdisciplinary science – the theory of the complex networks (CN) [2]. CN-s are multifractal objects, the loss of multifractality being the indicator of the system transition from more complex state into more simple state. We tested the multifractal properties of the data using the wavelet transform modulus maxima approach in order to analyze scaling properties of our company. Comparative analysis of the singularity spectrumf(®), namely, the difference between maximum and minimum values of ® (∆ = ®max ¡ ®min) shows that IBM company is considerably more fractal in comparison with Apple Computer. Really, for it the value of ∆ is equal to 0.3, while for the vertically integrated company Apple it only makes 0.06 – 5 times less. The comparison of other companies shows that this dependence is of general character. Taking into consideration the fact that network organization of business has become dominant in the last 5-10 years, we carried out research for the selected companies in the earliest possible period of time which was determined by the availability of data in the Internet, or by historically later beginning of stock trade of computer companies. A singularity spectrum of the first group of companies turned out to be considerably narrower, or shifted toward the smaller values of ® in the pre-network period. The latter means that dynamic series were antipersistant. That is, these companies‘ management was rigidly controlled while the impact of market mechanisms was minimized. In the second group of companies if even the situation did changed it did not change for the better. In addition, we discuss applications to the construction of portfolios of stock that have a stable ratio of risk to return.
APA, Harvard, Vancouver, ISO, and other styles
5

Russell, H. A. J., and S. K. Frey. Canada One Water: integrated groundwater-surface-water-climate modelling for climate change adaptation. Natural Resources Canada/CMSS/Information Management, 2021. http://dx.doi.org/10.4095/329092.

Full text
Abstract:
Canada 1 Water is a 3-year governmental multi-department-private-sector-academic collaboration to model the groundwater-surface-water of Canada coupled with historic climate and climate scenario input. To address this challenge continental Canada has been allocated to one of 6 large watershed basins of approximately two million km2. The model domains are based on natural watershed boundaries and include approximately 1 million km2 of the United States. In year one (2020-2021) data assembly and validation of some 20 datasets (layers) is the focus of work along with conceptual model development. To support analysis of the entire water balance the modelling framework consists of three distinct components and modelling software. Land Surface modelling with the Community Land Model will support information needed for both the regional climate modelling using the Weather Research &amp;amp; Forecasting model (WRF), and input to HydroGeoSphere for groundwater-surface-water modelling. The inclusion of the transboundary watersheds will provide a first time assessment of water resources in this critical international domain. Modelling is also being integrated with Remote Sensing datasets, notably the Gravity Recovery and Climate Experiment (GRACE). GRACE supports regional scale watershed analysis of total water flux. GRACE along with terrestrial time-series data will serve provide validation datasets for model results to ensure that the final project outputs are representative and reliable. The project has an active engagement and collaborative effort underway to try and maximize the long-term benefit of the framework. Much of the supporting model datasets will be published under open access licence to support broad usage and integration.
APA, Harvard, Vancouver, ISO, and other styles
6

Banerjee, Onil, Martin Cicowiez, and Renato Vargas. Integrating the Value of Natural Capital in Evidence-Based Policy Making. Inter-American Development Bank, 2020. http://dx.doi.org/10.18235/0002900.

Full text
Abstract:
This paper describes how Natural Capital Accounting (NCA) can be integrated into economy wide analytical frameworks to enhance evidence based decision making. Examples from applications of the Integrated Environmental Economic Modelling (IEEM) Platform show how explicitly accounting for the contributions of the environment to the economy in economic forecasting can lead to substantially different policy recommendations, overcoming some of the scope limitations of traditional economic performance analysis. Furthermore, the paper describes how NCA can be integrated into more traditional economic performance measurements, such as the System of National Accounts and their indicators such as adjusted Gross Domestic Product and Genuine Savings. Integration of natural capital into economy-wide analytical frameworks leads to better policy uptake of research findings and it empowers policymakers to avoid short-sighted decisions, which, although they can generate short-term economic gain, can have adverse consequences for economic, social, and environmental sustainability in the long run.
APA, Harvard, Vancouver, ISO, and other styles
7

Evans, A. G. A Knowledge Highway for Integrated Modelling from Manufacturing to Design. Defense Technical Information Center, 1994. http://dx.doi.org/10.21236/ada288872.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Toutin, Th. Multisource Data Fusion with an Integrated and Unified Geometric Modelling. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/218015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Banerjee, Onil, Martin Cicowiez, Renato Vargas, and Mark Horridge. The Integrated Economic-Environmental Modelling Framework: An Illustration with Guatemala's Forest and Fuelwood Sectors. Inter-American Development Bank, 2016. http://dx.doi.org/10.18235/0011777.

Full text
Abstract:
This paper develops and operationalizes the Integrated Economic-Environmental Modelling (IEEM) platform which integrates environmental data organized under the first international standard for environmental-economic accounting with a powerful economy-wide modelling approach. IEEM enables the ex-ante economic analysis of public policies and investment on the economy and the environment in a quantitative, comprehensive and consistent framework. IEEM elucidates the two-way interrelationships between the economy and environment, considering how economic activities depend on the environment as a source of inputs and as a sink for its outputs. In addition to standard economic impact indicators such as gross domestic product, income and employment, IEEM generates indicators that describe policy impacts on the use of environmental resources, wealth and environmental quality which together determine prospects for future economic growth and well-being. To illustrate the analytical capacity of IEEM, the model is calibrated with Guatemala's environmental-economic accounts and applied to analysis of its forest and fuelwood sector where negative health and environmental impacts arise from inefficient household fuelwood use.
APA, Harvard, Vancouver, ISO, and other styles
10

Hasan, Abdulghani. Flood Modelling Tool : an integrated GIS and hydrological modelling tool for planning nature-based solutions in the urban environment. Faculty of Landscape Architecture, Horticulture and Crop Production Science, Swedish University of Agricultural Sciences, 2024. http://dx.doi.org/10.54612/a.5s9t2ca774.

Full text
Abstract:
The risk of pluvial flooding is going to increase as climate change causes an increase in intense precipitation along with urbanisation leading to an increase in impermeable surfaces. In the last decade, cities such as Malmö and Copenhagen have already experienced severe pluvial flooding that has caused extensive damage. Adapting to climate change by creating flood resilient urban areas is therefore important and blue-green infrastructure (BGI) may be one measure to accomplish this. A hydrological model called TFM-DYN has been used to investigate whether BGI can aid the mitigation of pluvial flooding. TFM-DYN can also assist in selecting the best locations of BGIs. The problem of modeling urban floods using distributed high resolution hydrological models while considering the hydrological process in the upstream area is difficult due to the limited current computation capacity. However, coupling a distributed hydrological model (TFM-DYN) with an other semi distributed models (HYPE) is crucial to enable simulate, predict and map floods with high-resolution for an urban area while considering its catchment area. With the using of the new suggested coupled hydrological model, it is possible to connect and use the output results from HYPE model as an input to a distributed model (TFM-DYN). The interaction between HYPE and TFM-DYN will consider the hydrologic process occurred outside the model boundary of the interested urban area. The coupling of the two models will help initiating the model with real water depth data that may lead to more realistic simulation. The procedure of input data manipulation using the two model interactions is explained in details. The model is tested on a selected urban area to dynamically simulate the changes in the water depth with time using high resolution gridded data. The new coupled model can be of a great tool for wide range of user and stakeholders as an example to municipalities, water experts, insurance companies and to all other interested water organizations who have access to regional catchment models and in need for a high-resolution, flood simulation and mapping model.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Modelling integrato' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography