Relevant bibliographies by topics / Modelovací software / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Modelovací software.

Dissertations / Theses on the topic 'Modelovací software'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 34 dissertations / theses for your research on the topic 'Modelovací software.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Zemko, Zoltán. "Modelovací nástroj pro grafický návrh komponentových systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2013. http://www.nusl.cz/ntk/nusl-236174.

Full text
Abstract:
Component-based Software Engineering describes a complex information system as a set of components. The thesis seeks to highlight the benefits of this approach. Also defines terms such as standard software, component software, and others. It provides an introduction to the modeling techniques of component-based systems in UML. The second half of the document describes the structure of the Eclipse Modeling Project. The reader by these lines should obtain a theoretical overview of the development of modeling tools under Eclipse. The document includes design and implementation process description of the tool for modeling component-based systems which has been developed using the Eclipse Modeling Framework and Graphical Modeling Framework.
APA, Harvard, Vancouver, ISO, and other styles
2

Gál, Ivan. "Modelovací nástroj pro grafický návrh komponentových systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2009. http://www.nusl.cz/ntk/nusl-236698.

Full text
Abstract:
This thesis deals with component software, software frameworks for the Eclipse platform and the creation of a graphical editor for designing component systems with the usage of the Eclipse platform. After introducing the conception of UML component diagram, it describes the overview of component software, components and component technologies of major players on ground of component software: OMG, Sun, Microsoft. A significant part is dedicated to software frameworks for the Eclipse platform for manipulating with meta models. EMF, GEF and GMF are described in more detail. The main part presents the design, implementation and evaluation of a graphical editor for designing component systems with emphasis on understandability and good arrangement.
APA, Harvard, Vancouver, ISO, and other styles
3

Farmačková, Taťána. "Modelová podpora řízení systému městské hromadné dopravy v Praze." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-3588.

Full text
Abstract:
Modelování městských dopravních systémů je v současné době nemyslitelné bez adekvátní automatizované podpory. Cílem textu je objasnit význam modelování a simulace v dopravě, resp. při plánování, řízení a optimalizaci dopravních procesů v těchto systémech probíhajících, dále pak představit některé organizace, které se v Praze v současné době modelováním dopravy zabývají a především pak některé konkrétní podpůrné softwarové modelovací nástroje (PTV Vision, Emme3, OmniTRANS aj.), které se zde za tímto účelem využívají. Dále jsou v textu uvedeny některé další prostředky možného zkvalitnění v součastnosti neoptimálně fungujícího systému pražské dopravy.
APA, Harvard, Vancouver, ISO, and other styles
4

Karlíková, Adéla. "Modelling of flow and pressure characteristics in the model of the human upper respiratory tract under varying conditions." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413820.

Full text
Abstract:
Cílem této diplomové práce je vytvořit 3D model horních dýchacích cest podle originálního modelu segmentovaného z CT dat, aplikovat různé podmínky na průtok vzduchu v modelu, a poté hodnotit změnu charakteristik rychlosti a tlaku. Model horních dýchacích cest byl vytvořen v prostředí softwaru ANSYS, který využívá výpočetní dynamiku tekutin, a byly použity Navier-Stokesovy rovnice pro modelování průtoku vzduchu v modelu. Nejprve byl vytvořen jednoduchý 2D model za účelem seznámení se s prostředím ANSYS. Dále byl zkonstruován 3D model horních dýchacích cest a byly modelovány charakteristiky rychlosti a tlaku za různých podmínek. Tyto podmínky zahrnují různé umístění a množství míst pro odběr vzorků v modelu a výběr různých kombinací vstupů. Nakonec byly prezentovány a hodnoceny výsledky spolu s ilustracemi modelů modelovaných za různých podmínek. 3D model lze považovat ze kompromis mezi výpočetní náročností a složitostí modelu a lze jej použít jako základ pro další výzkum.
APA, Harvard, Vancouver, ISO, and other styles
5

Göringer, Tomáš. "Modelování ultrazvukového pole metodou konečných prvků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217976.

Full text
Abstract:
The first part of the Master´s thesis describes physical principles of ultrasound and fundamental variables of ultrasound field. It also deals with mathematical description of finite element method and outlines basic principles of ultrasound computed tomography. The second part introduces finite elements generator GMSH. This part focuses on the process of ultrasound field simulation and presents software that can be used for field simulation. The last part contains examples of models.
APA, Harvard, Vancouver, ISO, and other styles
6

Semmler, Jiří. "Nástroj pro podporu spolupráce při agilním modelování a vývoji software." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2017. http://www.nusl.cz/ntk/nusl-363769.

Full text
Abstract:
The ain of this thesis is to define and describe specific challenges occuring on the crossroard between project management and knowledge management with the focus on agile software development and agile modeling. Based on the found and verified problem it tries to find a existing solution. After that, it analyses, specifies and designs an own solution. Focusing on covering of three different perspectives makes this thesis unique. After process of design, there are technologies defined. For all used technologies there is described detailed implementation of the application. The third-party technologies are connected in this application.This connection creates the extra added value for the application and user in processes of agile software development and agile modeling.
APA, Harvard, Vancouver, ISO, and other styles
7

Mates, Vojtěch. "Optimalizace procesů vývoje software." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2012. http://www.nusl.cz/ntk/nusl-223407.

Full text
Abstract:
The master thesis is focusing on modelling and optimizing of business processes. The selected group of processes is oriented to software development area. As the result of the analysis, problematic issues of processes are revealed. The optimizing of processes is primary focused on reducing total performance time of processes and related costs.
APA, Harvard, Vancouver, ISO, and other styles
8

Kubalcová, Monika. "ITIL v prostředí agilního vývoje software metodikou Scrum." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2014. http://www.nusl.cz/ntk/nusl-235418.

Full text
Abstract:
This thesis follows concept of integration ITIL library and agile methodology Scrum into the IT company developing IT services. After theoretical analysis of both concepts and analysis of chosen company, we will develope methodology, which will tie both process approaches and ensure their perfect synergy. As a methodology support, web application was developed. It evaluates effectivness of processes using key informations and their plot representation. Proposed methodology was presented in the AVG Technologies, which used described processes as template for its internal proceses. Main result of the thesis is set of templates describing processes, which could be specified and applied in companies using Scrum together with ITIL for their development.
APA, Harvard, Vancouver, ISO, and other styles
9

Lapáček, Vladimír. "Bezpečnost při vývoji softwaru." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-72471.

Full text
Abstract:
The topic of the thesis is issue of security during the application development. The main emphasis is being placed on web applications. The goal is to define a framework for managing the life cycle of applications to meet the security minimum. The objectives of the work are achieved by study of available resources and their subsequent analysis. The target audiences are software developers interested in learning more about how to create secure applications. The work describes the areas that are crucial for security of applications. Work contains security standards which we can use for defining security requirements of applications. Furthermore, there are mentioned the most serious security vulnerabilities and ways how to avoid them. It describes issue of security testing as an important tool for verifying security. The main part of work is the chapter dealing with the way how to include the issue of security throughout the application life cycle.
APA, Harvard, Vancouver, ISO, and other styles
10

Jílek, Jaroslav. "Optimalizace procesů - metody, nástroje, praxe." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-3124.

Full text
Abstract:
Práce se zabývá problematikou procesního řízení v moderním pojetí managementu. V teoretické části je procesní řízení nejprve představeno v kontextu různých přístupů managementu změny. Dále jsou popsány aspekty kvality procesu a nastíněny základy modelování a simulace procesů s využitím specializovaného softwaru. Praktická část je věnována aplikaci vybraného modelovacího nástroje v reálných podmínkách praxe, jsou analyzovány hlavní procesy ve spolupracující organizaci a rovněž proveden návrh dokumentovaných postupů pro dva procesy v této organizaci dosud podrobně nepopsané.
APA, Harvard, Vancouver, ISO, and other styles
11

Šťastný, Martin. "Modelování a simulace robotických aplikací." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232094.

Full text
Abstract:
The aim of this master thesis is to make research of Open Source software, which are used for simulation autonomous robots. At the begining is performed research of selected robotic simulators. In the first part of this work is to get familiar with robotic simulator Gazebo and robotic framework ROS. The second part of this work deals with simulating and subsequent implementation of choosen robotic tasks through the simulator Gazebo and the ROS framework.
APA, Harvard, Vancouver, ISO, and other styles
12

Borek, Dušan. "Simulace dynamiky vozidla využitím software V-REP." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254431.

Full text
Abstract:
This theasis deals with modeling dynamics and visualization of experimental vehicle CAR4 in software V-REP. The first part shows introduction with V-REP and its possibilities for usage in simulations. The second part presents modelling of CAR4 vehicle and its control by using software V-REP and Matlab. In last part are models of vehicle tested in simulation
APA, Harvard, Vancouver, ISO, and other styles
13

Hlavínek, Jakub. "Software WEST pro výpočet čistíren odpadních vod." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392043.

Full text
Abstract:
In it´s theoretical part, my master thesis handles selected softwares for wastewater treatment mathematical modelling. It summarizes and compares availible softwares on the market, it´s use, advantages and disadvantages. The practical part deals with an exemplar evaluation of selected wastewater treatment plant according to Czech normative standards and evaluation of the same wastewater treatment plant per mathematical model created in WEST program. The assembly of a wastewater treatment plant model consisted of studies, creation of the layout, insertion of provided data, calibration and model evaluation.
APA, Harvard, Vancouver, ISO, and other styles
14

Pagáč, Jiří. "UML profil pro modelování komponentových systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-236998.

Full text
Abstract:
The thesis deals with the modeling of the Component Based Software (CBS) systems in the UML language and with extension of the UML language with using of meta-modeling techniques and with using of the UML Prodile technology. Thesis also deals with Component Based Development (CBD). The main part of this study deals with specifying of methodology for creating of UML Prodiles and with demonstration of this methodology on selected Component System meta-model by creating the profile including the OCL constraints and description of problems with creating of the prodile. Thesis also describes support of the UML Profile technology in existing UML CASE tools. For demonstration purposes thesis contains the case study with example which uses in this work created UML Profile. Profile is created in accordance with specification of UML version 2.3 and OCL in version 2.2. Demonstration is performed and profile itself is created using IBM Rational Software Architect version 8.0.2.
APA, Harvard, Vancouver, ISO, and other styles
15

Crlík, Radek. "Nástroj pro podporu vývoje softwarových systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2017. http://www.nusl.cz/ntk/nusl-363800.

Full text
Abstract:
To be able to create quality software system, one need to analyse it well, design, program and test it. The whole process is called software life-cycle and is studied by software engineering. Today, there are many tools making this process easier. For analysing and designing software UML language became favourite. It enables programmers to describe different aspects of software by graphical diagrams and enables them to comprehend them better. Some of them can be translated into source code in chosen programming language. Problem is maintaining those diagrams during later phases when source code was already generated and is used exclusively. This problem is trying to be solved by Model-Driven Development, where programmer is working with well-defined models that can be automatically transformed into the source code that don't have to be edited by hand. Unfortunately this approach is not universal. This work tries to design and create tool that can work with use case diagrams, class diagrams and object-oriented Petri nets. This tool should allow designing those diagrams and be able to synchronise information between them to make the software design easier.
APA, Harvard, Vancouver, ISO, and other styles
16

Kučera, Antonín. "Návrh využití vývojového rámce Scrum a modelovacího jazyka UML pro zefektivnění tvorby webových stránek." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-165084.

Full text
Abstract:
The main goal of this diploma thesis is the proposal to use agile development procedures of Scrum framework with UML modeling language applicable for creating websites of small scale. The emphasis is especially put on creating a practically usable type model of the websites. The theoretical part of the thesis has two main chapters. In the "Agile methodology" chapter are listed principles of agile approach to creating software. The next part of this chapter is focus on agile methodologies (Scrum, XP, ASD, FDD, DSDM, LD and Crystal). In the "UML" chapter is introduced modeling language UML and its principles. The next part of this chapter is focus on UML diagrams used in practical part of this thesis (use case diagram, class diagram, sequence diagram, activity diagram and deployment diagram). The practical part of this thesis focuses on the design type model for creating websites of small scale. The type model is based both on the theoretical part of this work and practical experience of the author. In the first part is introduced scheme of model, where is shown the mutual relationship of individual phases. In the next part of this chapter are discussed the individual phases where is used the principle of agile development framework Scrum and examples of use of the UML diagrams.
APA, Harvard, Vancouver, ISO, and other styles
17

Hrušková, Veronika. "Zhodnocení vybraných softwarových nástrojů určených pro modelování úniku nebezpečných látek při haváriích v chemickém průmyslu." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232753.

Full text
Abstract:
The thesis is aimed at the modeling of releases of hazardous substances to the designated software tools. The work consists of three parts. The first part is theoretical, which deals with hazardous substances and their legislation, accidents in industry, physical models of leakage and dispersion of hazardous substances and factors influencing their spread in the air and finally software tools. The second part, experimental, describes some software tools and their subsequent modeling. The third part is devoted to the results of modeling and analysis of selected software tools. The aim of the thesis is to analyze selected software tools for modeling the release of hazardous substances, to compare their explanatory power and potential use.
APA, Harvard, Vancouver, ISO, and other styles
18

Plachý, Lukáš. "Metodika návrhu architektury SW informačního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221947.

Full text
Abstract:
The aim of this work is to propose such a methodology for designing of SW applications architecture that allows effortless, exact and systematical transformation of the real business process into a model suitable as an assignment for implementation by programmers. The aim of this proposal is such a methodology that would allow to reach the above mentioned goals on the basis of easy-to-understand and simple principles and that would be available either as a fundament for its usage within methodologies that are focused on the management of such projects, or as an alternative to methodologies that are much to expensive, complex and/or designed for very large development teams.
APA, Harvard, Vancouver, ISO, and other styles
19

Náplavová, Eva. "Kalibrace hydraulického modelu vodovodní sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409704.

Full text
Abstract:
This diploma thesis deals with calibration of hydraulic simulation models, especially with methods used for calibration and parameters that are modified during calibration. The literature review in the field of mathematical modeling, basic principles applied in hydraulic modeling and the current approach to calibration and data collection is done in theoretical part. In the practical part of the thesis, a hydraulic model of the group water supply system Horní Dunajovice is built and subsequently calibrated. The calibration is first performed manually for the normal operational status and then using a calibration software created for this purpose for a load case with high velocity.
APA, Harvard, Vancouver, ISO, and other styles
20

Boháček, Petr. "Informační systém technické podpory." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2007. http://www.nusl.cz/ntk/nusl-236803.

Full text
Abstract:
This master's thesis deals with the analysis of the requirements placed on the technical support information system which should be used in the software developing company. The basic functions of this system are the collecting of information about all kinds of work which the company employees concentrate on and the possibility of statistics generating. Moreover, it is also possible to implement further extensions to the system which will not only enable other functions, that are not related to the primary goal of the system, to be integrated; but also to define new user roles, for which various limited parts of the system will be accessible.
APA, Harvard, Vancouver, ISO, and other styles
21

Zduba, Andreas. "Tvorba datového skladu a reportovacích služeb." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2016. http://www.nusl.cz/ntk/nusl-254248.

Full text
Abstract:
The aim of this master thesis was to design and develop decision making solution (Business Intelligence) for company Toprecepty.cz. Thanks to this solution, company management will have the ability to produce better decisions based on gained analytical information.
APA, Harvard, Vancouver, ISO, and other styles
22

Ilčík, Ondřej. "Nástroj pro grafické prototypování vestavěných systémů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-412844.

Full text
Abstract:
This study is focused on grafical modeling of embedded systems using dialects of UML. It provides a brief description of existing profiles. Furthemore it deals with modeling frameworks for the Eclipse platform and describes an implementation of such modeling tool as a part of project Lissom.
APA, Harvard, Vancouver, ISO, and other styles
23

Šebánek, Jan. "VYUŽITÍ 3D TECHNOLOGIÍ VE VEŘEJNÉM PROSTORU." Doctoral thesis, Vysoké učení technické v Brně. Fakulta výtvarných umění, 2016. http://www.nusl.cz/ntk/nusl-240509.

Full text
Abstract:
The aim of this thesis is to define the impact of rapid prototyping technology in terms of creative potential to use this technology represents a particularly sculpture and architecture. Rapid Prototyping is a generic term covering a range of technologies: 3D scan converting the already realistic three-dimensional objects in computer memory, parametric modeling, which creates three-dimensional objects based on the formative algorithms, photogrammetry method of compiling three-dimensional object from a photo, technology, 3D printing materializing after each layer objects transferred from the computer's memory. When processing the theoretical work will be explored and discussed possibilities for realization of basic three-dimensional objects using 3D technology. The second step will be to map the different methods of access to artists working with 3D technology. In the end it tried to evaluate the benefits of these technologies in the field of sculpture and architecture in terms of traditional approaches. This paper attempts to describe the possible implications and potential of this progressive field in the classical artistic disciplines such as sculpture and architecture, both in terms of benefits and in terms of the eventual negative impact with respect to increasing the availability of this technology.
APA, Harvard, Vancouver, ISO, and other styles
24

Caha, Matěj. "Modelem řízený návrh konferenčního systému." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2013. http://www.nusl.cz/ntk/nusl-236187.

Full text
Abstract:
This thesis deals with the topic of  model-based design and application of simulation in system design. In the introduction, the thesis discusses the history of software development process and outlines the current status. The aim is to demonstrate a model-driven design on a case study of conference system. There will be presented formalisms of DEVS and OOPN  together with experimental tools PNtalk and SmallDEVS that allow to work with these formalisms. The resulting model of conference system will be deployed as part of a web application using a framework Seaside in the Squeak environment.
APA, Harvard, Vancouver, ISO, and other styles
25

Forejtník, Jan. "Moderní přístupy k projektování elektrických zařízení se zaměřením na železniční stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413125.

Full text
Abstract:
The topic Modern Approaches to Designing Electrical Equipment with a Focus on Railway Construction responds to the decision of the Government of the Czech Republic to introduce the BIM method for government over-the-counter contracts from 1 January 2022. The government evaluated the BIM method as an effective tool for digitizing the construction industry. The diploma thesis deals with the method of designing high-current equipment, technologies and distribution on railways according to this new method. The work summarizes information about the present method of design, used high-current electrical equipment on the railway, the near and distant future of railway operation, the organization of administration and maintenance of equipment. It discusses the principle of the BIM method and basic software solutions supporting design activities according to this new method. The Promis.e software published by Bentley is also described in detail, which supports the design of electrical equipment for linear structures according to this method. The BIM method is a means of fulfilling the essence of Construction 4.0. It uses uniform data formats, a common data environment, working with non-graphic information. In the second part of the diploma thesis, the drawing documentation for the sample project of high-current distribution of the railway station was prepared. It was first created using AutoCAD software. After that, the sample project demonstrates the basic principles of the BIM method using Promis.e software. Furthermore, this project is evaluated, both methods of design are compared. The procedure of introducing the BIM method for the design of electrical equipment in a specific design company is proposed and other possible steps in working with the Promis.e software are discussed. The way of creating a and adding element libraries is described. At the end of the diploma thesis it is stated that to successfully master the design work according to the BIM method, it is necessary to have experience with design work in the field, know the principles of the BIM method, choose a suitable software solution, continuously and thoroughly manage these tools and train staff. Under these conditions, it will be possible to make full use of the potential of the BIM method.
APA, Harvard, Vancouver, ISO, and other styles
26

Libič, Peter. "Garbage Collection in Software Performance Engineering." Doctoral thesis, 2015. http://www.nusl.cz/ntk/nusl-350093.

Full text
Abstract:
Title Garbage Collection in Software Performance Engineering Author Peter Libič peter.libic@d3s.mff.cuni.cz Advisor doc. Ing. Petr Tůma, Dr. petr.tuma@d3s.mff.cuni.cz Department Department of Distributed and Dependable Systems Faculty of Mathematics and Physics Charles University Malostranské nám. 25, 118 00 Prague, Czech Republic Abstract The increasing popularity of languages with automatic memory management makes the garbage collector (GC) performance key to effective application execution. Unfortunately, performance behavior of contemporary GC is not well understood by the application developers and often ignored by the per- formance model designers. In this thesis, we (1) evaluate nature of GC overhead with respect to its effect on accuracy of performance models. We assess the possibility to model GC overhead as a black-box and identify workload characteristics that contribute to GC performance. Then we (2) design an analytical model of one-generation collector and a simulation model of both one-generation and two-generation collectors. These models rely on application characteristics. We evaluate the accuracy of such models and perform an analysis of their sensitivity to the inputs. Using the model we expose the gap between under- standing the GC overhead based on knowing the algorithm...
APA, Harvard, Vancouver, ISO, and other styles
27

Divín, Josef. "Modelování průtoků pomocí softwarů HEC-RAS a HEC-GeoRAS." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-168493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Kamenčák, Pavel. "Modelování nábytkových objektů a technologické aplikace." Master's thesis, 2011. http://www.nusl.cz/ntk/nusl-90900.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Jirman, Michal. "Modelování vodní bilance vybraných zemědělských porostů s využitím softwaru SoilClim." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-166611.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Čermáková, Lenka. "Modelování n-letých průtoků vodního toku Dědiny pomocí softwaru HEC-RAS." Master's thesis, 2011. http://www.nusl.cz/ntk/nusl-90796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

FIKTUSOVÁ, Jana. "Vytvoření učebních podpor k předmětu "Počítačové modelování a výpočty v technice"." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-120243.

Full text
Abstract:
This diploma thesis offers to the reader the basic overview of the most used methods of computer simulation and accessible software which can be used for this purpose. The aim of the thesis is not a detailed description of individual procedures, but rather a creation of overview text which can be used by the reader as a material for the primary orientation to the given problems. The thesis is outlined as a proposal of the themes of lectures of the subject ?Computer simulation and calculations in technology?. The thesis is divided into three thematic blocks. In the first block, the reader is acquainted with the programming language MATLAB, with its possibility of application in study as well as in practice. The second block acquaints with the CAD systems and the last block presents a nearer usage of individual software applications during the solution of selected model situations.
APA, Harvard, Vancouver, ISO, and other styles
32

Indrová, Magdalena. "Srovnání možností software Dyna-Clue a LandChangemodeler pro predikční modelování suburbánního rozvoje modelového území v zázemí Prahy." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-306712.

Full text
Abstract:
Comparison of Dyna-CLUE and Land Change Modeler software for predictive modelling in the suburban area of Prague Abstract The objective of this work was to predict the development of the suburban area of Prague, using Dyna- CLUE and Land Change Modeler (LCM) software, and based on the results compare the capabilities of both these software tools. In this work I used time series of land cover data obtained by the department of applied geoinformatics and cartography, local plans of the municipalities, and information about soil protection provided by the Research Institute for Soil and Water Conservation. Based on these data, a predicted land cover map for 2020 was created in both software tools. The results were then compared and showed that the models respect the restriction of development in predetermined areas. In accordance with local plans, new residential development was properly allocated. For commercial development, the requirements were not completely fulfilled. It is evident that both models are able to create a correct map of future land cover based on specified requirements. However, the instability of LCM and the necessity of using other software while working with Dyna- CLUE somewhat complicated the work. Keywords: Dyna-CLUE, Land Change Modeler, predictive modelling, land cover, residential...
APA, Harvard, Vancouver, ISO, and other styles
33

Rotová, Petra. "ANALÝZA SVAHOVÉ DEFORMACE ZÁŘEZU DÁLNICE D11." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-341314.

Full text
Abstract:
This diploma thesis consists of a research and a practical part. The research part summarises the problem of slopes movements. The practical part deals with the determination of the slope deformation causes, at the 76th km of the D11 motorway. Causes determination was based on laboratory tests of soil samples taken from the disrupted motorway cut, made at PřF UK soil mechanics lab. Tests of grain size composition were done, plasticity of the L 26 sample was determined and critical strength of the reconstituted L26 and L27 samples was found out in the Translational apparatus box. Soils were categorized due to the according standards and the acquired data were evaluated. In the BricsCAD software, a well arranged locality situation and the slope deformation crosscut underlayed with the geophysical ERT cut were illustrated. In the GEO5 software, slope stability models were created using the Spencer Method of Slices. The slip surface and the groundwater level during the disruption were determined. The practical part also covers a proposal of a remediation appropriate for this deformation and it's modelling in GEO5. For the remediation, the slope stability level is determined. The work is based on the specialized literature, articles, research reports and standards. Powered by TCPDF (www.tcpdf.org)
APA, Harvard, Vancouver, ISO, and other styles
34

KŘÍHA, Jan. "Řešení protierozní ochrany na modelovém povodí matematickým modelováním." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-50764.

Full text
Abstract:
The contents of this thesis is an examination and assessment of erosion processes in the catchment Budského stream. The area of interest falls into three cadastral territory, Malče, Besednice a Soběnov. Catchment area is 7.1 km2. Integral part of work is the pedological and hydrological research. It was evaluated the impact of waste in the surrounding villages. In the catchment basin, has a significant influence Besednice reservoir. It was assessing its impact on the environment and erosion control functions. Using the acquired information has been calculated N-year water and the amount of drifted soil by Wischmeier and Smith. Another goal is to process this data using software modeling and evaluate output. Against this background and the results are recommended measures to reduce soil loss from these plots.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography