Books on the topic 'Modulus elasticity'

Shaker, Atif F. The effective modulus of elasticity of concrete in tension. Dept. of Civil Engineering, University of Alberta, Canada, 1991.

John, Youngquist, and United States Forest Service, eds. Density, modulus of elasticity, creep, and durability of hardboard: A bibliography. U.S. Dept. of Agriculture, Forest Service, 1994.

John, Youngquist, and United States Forest Service, eds. Density, modulus of elasticity, creep, and durability of hardboard: A bibliography. U.S. Dept. of Agriculture, Forest Service, 1994.

John, Youngquist, and United States Forest Service, eds. Density, modulus of elasticity, creep, and durability of hardboard: A bibliography. U.S. Dept. of Agriculture, Forest Service, 1994.

1933-, Cozzarelli Francis A., ed. Elastic and inelastic stress analysis. Taylor and Francis, 1997.

K, Kokula Krishna Hari, ed. Determination of Modulus of Elasticity of Hybrid composite material with reinforcement of Coconut coir: ICIEMS 2014. Association of Scientists, Developers and Faculties, 2014.

Y, Baaklini George, and NASA Glenn Research Center, eds. Thermoelastic stress analysis: The mean stress effect in metallic alloys. National Aeronautics and Space Administration, Glenn Research Center, 1999.

Dutt, Pravir. A spline-based parameter estimation technique for static models of elastic structures. ICASE, 1986.

Shlomo, Taasan, and Institute for Computer Applications in Science and Engineering, eds. A spline-based parameter estimation technique for static models of elastic structures. Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1986.

Shlomo, Taasan, and Institute for Computer Applications in Science and Engineering, eds. A spline-based parameter estimation technique for static models of elastic structures. Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1986.

Shlomo, Ta'asan, and Institute for Computer Applications in Science and Engineering., eds. A spline-based parameter estimation technique for static models of elastic structures. Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1986.

1947-, Miller Robert A., and NASA Glenn Research Center, eds. Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions. National Aeronautics and Space Administration, Glenn Research Center, 1999.

D, Kiser James, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Matrix density effects on the mechanical properties of SiC/RBSN composites. National Aeronautics and Space Administration, 1990.

Center, Lewis Research, ed. Low cost manufacturing approach of high temperature PMC components. National Aeronautics and Space Administration, Lewis Research Center, 1997.

Center, Lewis Research, and United States. National Aeronautics and Space Administration., eds. Low cost manufacturing approach of high temperature PMC components. National Aeronautics and Space Administration, Lewis Research Center, 1997.

A, Miller Robert, and Lewis Research Center, eds. Determination of creep behavior of thermal barrier coatings under laser imposed temperature and stress gradients. National Aeronautics and Space Administration, Lewis Research Center, 1997.

E, Kretschmann David, and Forest Products Laboratory (U.S.), eds. Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2007.

C, Smith, Lumban-Tobing F, and Langley Research Center, eds. Analysis of thick sandwich shells with embedded ceramic tiles. National Aeronautics and Space Administration, Langley Research Center, 1996.

Lee, Hosin David. Validation of the mix design process for cold in-place rehabilitation using foamed asphalt. Public Policy Center, University of Iowa, 2007.

1935-, Wightman James P., and Langley Research Center. Materials Division., eds. Fracture surface analysis in composite and titanium bonding: Semi-annual report. Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Li, Jian. Simplified data reduction methods for the ECT test for mode III interlaminar fracture toughness. National Aeronautics and Space Administration, Langley Research Center, 1995.

Bansal, Narottam P. Solid state synthesis and properties of monoclinic celsian. National Aeronautics and Space Administration, 1996.

Center, Lewis Research, ed. Theoretical analysis of compatibility of several reinforcement materials with NiAl and FeAl matrices. National Aeronautics and Space Administration, Lewis Research Center, 1989.

Center, Lewis Research, ed. Modfications of system for elevated temperature testing and stress-strain measurement of metal matrix composites. National Aeronautics and Space Administration, Lewis Research Center, 1985.

Polonina, Elena, Sergey Leonovich, Sergey Fedosov, and Valeriy Yaglov. Structural concrete with a complex addition of hydrothermal nanosilicon and carbon nanotubes. INFRA-M Academic Publishing LLC., 2023. http://dx.doi.org/10.12737/1981690.

Munro, R. G. Elastic moduli data for polycrystalline oxide ceramics. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2002.

Hacke, Peter. Research opportunities in reliability of photovoltaic modules. National Renewable Energy Laboratory, 2010.

Chrzanowska, Elżbieta. Ocena dynamicznych modułów sprężystości skał na podstawie pomiarów wybranych własności fizycznych utworów fliszu podhalańskiego: Dynamic moduli evaluation based on measurements of selected physical properties of Podhale flysh [i.e. flysch] rocks. Wydawnictwo Polskiej Akademii Nauk, 1996.

Rossella, Bedini, ed. Le resine composite a basso modulo di elasticità: Analisi delle proprietà meccaniche di alcuni materiali. Istituto superiore di sanità, 2000.

Statistical mechanics of elasticity. 2nd ed. Dover Publications, 2002.

Kassir, Mumtaz. Applied Elasticity and Plasticity. Taylor & Francis Group, 2017.

Kassir, Mumtaz. Applied Elasticity and Plasticity. Taylor & Francis Group, 2017.

Kassir, Mumtaz. Applied Elasticity and Plasticity. Taylor & Francis Group, 2017.

Applied Elasticity and Plasticity. Taylor & Francis Group, 2017.

Material inhomogeneities in elasticity. Chapman & Hall, 1993.

364.5T-10: Importance of Modulus of Elasticity in Surface Repair Materials. American Concrete Institute, 2010. http://dx.doi.org/10.14359/51663986.

Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity. Taylor & Francis Group, 2006.

Soleus fiber force and maximal shortening velocity after non-weight bearing with intermittent activity. National Aeronautics and Space Administration, 1996.

Elastic Beams and Frames. Albion/Horwood Publishing Ltd, 2002.

A spline-based parameter estimation technique for static models of elastic structures. Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1986.

Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2007.

Property evaluation of LTM25 composite materials. National Aeronautics and Space Administration, Langley Research Center, 1996.

Miyazaki, Shuichi, and Hee Young Kim. Ni-Free Ti-based Shape Memory Alloys. Elsevier Science & Technology Books, 2018.

Ni-Free Ti-Based Shape Memory Alloys. Elsevier Science & Technology Books, 2018.

Escudier, Marcel. Fluids and fluid properties. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198719878.003.0002.