Dissertations / Theses: 'Mogul'

1

Felcman, Michal. "Finanční analýza Federal-Mogul Friction Products,a.s." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-4123.

Full text

Abstract:

Diplomová práce má za cíl analyzovat finanční situaci podniku Federal-Mogul Friction Products, a.s. v letech 2002 až 2006.Užívá analýzy finančních výkazů - rozvahy,výsledovky a výkazu cash flow, poměrových ukazatelů, komplexních metod hodnocení, mezipodnikového srovnání.Popisuje tyto teoretické pojmy a následně je prakticky aplikuje.Dále blíže popisuje samotný podnik.

APA, Harvard, Vancouver, ISO, and other styles

2

Ali, Lamine Hashim. "The culture of the Mughal capital cities, 1556 to 1658." Connect to full text, 2005. http://hdl.handle.net/2123/4016.

Full text

Abstract:

Thesis (Ph. D.)--University of Sydney, 2005.
Title from title screen (viewed January 28, 2009) Submitted in fulfilment of the requirements for the degree of Doctor of Philosophy to the Dept. of Indian Subcontinental Studies, School of Languages and Cultures, Faculty of Arts. Includes bibliography. Also available in print form.

APA, Harvard, Vancouver, ISO, and other styles

3

Dosedlová, Petra. "Hodnocení výkonnosti společnosti Federal-Mogul Friction Products a.s. s využitím EFQM Excelence model." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-319210.

Full text

Abstract:

The master´s thesis deals with performance measurement of the company FEDEDAL-MOGUL Friction Production, a.s. This valuation of efficiency is performed on EFQM Excellence model. Theoretical part of thesis is focused on description of selected models of valuation of efficiency with more detailed orientation to EFQM Excellence model. In the second part the company is characterized and company´s current situation is described.The last part contains an application of START PLUS model based on the principles of The EFQM Excellence Model. At the end are series of recommendations for increase efficiency.

APA, Harvard, Vancouver, ISO, and other styles

4

Qureshi, Adeela. "The hunt as metaphor in Mughal painting (1556-1707)." Thesis, University of Oxford, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.669811.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Munoz, Juan Jose. "Structural Analysis of the Cove Wash Section of the Mogul Fault, Pinal County, Arizona." Thesis, The University of Arizona, 2015. http://hdl.handle.net/10150/578949.

Full text

Abstract:

A structural analysis was carried out across on a transect of the eastern part of the Mogul fault along the Charlouleau Gap Road, located in southern Pinal County, Arizona, to examine how the increased presence of the Pinal Schist along the eastern segment of the exposed fault influenced the faulting along this section. Changes in foliation orientation within the Pinal Schist were observed and measured. The data base evaluated included hundreds of foliation orientation measurements taken and reported by Jinks (1961) in his University of Arizona M.S. thesis. The two sets of observations and orientations revealed that the orientations of the foliation within the Pinal Schist are notably different within the eastern segment of the fault versus the western. It was also found that a section of mylonitized Oracle Granite and highly sheared Pinal Schist crop out on the eastern segment of the fault, contrary to past observations that such mylonitic fabrics were exclusively found within the western segment of the fault. The overall geometry of ‘dragged and rotated foliations in the Pinal Schist in the eastern segment of the Mogul fault reinforces Jinks'(1961) interpretation that the kinematic history of this shear zone included left handed shear.

APA, Harvard, Vancouver, ISO, and other styles

6

Morgan, Beverley Ann. "The stimulation of innovation advantage through autonomous intrapreneurship at Federal Mogul Sealing Systems South Africa." Thesis, Nelson Mandela Metropolitan University, 2006. http://hdl.handle.net/10948/573.

Full text

Abstract:

In the rapidly evolving organisational landscapes of today, the quest to grow or sustain competitive advantage demands that organisational practices become more innovative, hence innovative advantage. Globalisation and technological advances drive the necessity for innovation within organisational contexts and the resultant rapid pace of change demands that organisations adopt an intrapreneurial orientation to accommodate this need for innovation. South African organisations, in particular those within the automotive sector, are faced with both unique opportunities and threats as a result of the increased impact of globalisation and the resultant open markets in the post-apartheid era. Programs offered by governmental institutions for this industry sector, such as the Motor Industry Development Programme (MIDP), as well as widely promoted systems such as those engendered by continuous improvement and benchmarking to achieve excellence, are successful only in attaining uniformity and incremental improvements and one-dimensional thinking methodologies. The quest for innovation advantage requires increased creative activity to assist individuals within these organisations in adopting an intrapreneurial outlook to provide proactive solutions. The literature survey has revealed that top-down controls and centralised decision-making as provided by corporate entrepreneurship, is the antithesis of intrapreneurship. Intrapreneurship is thus an autonomous process. Federal Mogul Sealing Systems (FMSS), an automotive component manufacturer within the Eastern Cape served as the basis for this study. A detailed literature review was conducted and a questionnaire was drawn up and distributed in an attempt to assess the three prevalent elements for the creation of innovation advantage through intrapreneurship as reviewed in the literature survey. The three elements were: individual intrapreneurial traits, organisational barriers and enablers of intrapreneurship and the influence of precipitating events on intrapreneurship. The research was conducted and recommendations were made based on the objectives of this study in relation to the organisation under study, FMSS.

APA, Harvard, Vancouver, ISO, and other styles

7

Fry, Peter-John. "Using value stream mapping to identify waste in the manufacturing of automotive components at Federal Mogul." Thesis, Port Elizabeth Technikon, 2003. http://hdl.handle.net/10948/271.

Full text

Abstract:

This research addresses the application of Value Stream Mapping in the automotive component industry. The goal of this research is to investigate how Value Stream Mapping can identify waste, and to evaluate its benefits on a specific application instance. Value Stream Mapping is used to first map the current state and then used to identify sources of waste and to identify lean tools to try eliminate this waste. The future state map is then developed with lean tools applied to it. A South African company, Federal Mogul South Africa (FMSA), has experienced the impact of globalisation and the need to become globally competitive first hand. FMSA will be used as a case study to illustrate the impact of using Value Stream Mapping as a tool for identify waste and the need for improving the performance of a company’s value stream in achieving the international goals set for the company and its supply chain.

APA, Harvard, Vancouver, ISO, and other styles

8

Mitchell, C. P. (Colin P. ). "The embassy of Sir Thomas Roe and its primacy in seventeenth century Mughal historiography : a re-evaluation." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=23230.

Full text

Abstract:

This thesis is the study of one of the most consistently used primary sources of early seventeenth century Mughal India. The Embassy of Sir Thomas Roe, written by England's first ambassador to the court of Jahangi r, has traditionally been construed to be a succinct and perceptive account. Moreover, historians have relied on Thomas Roe's observations and conclusions to offer certain interpretations of Jahangi r's court: most notably, its decline as a forum of centralized absolutism into an arena of intrigue and rivalry.
Roe, as a product of Jacobean society, perceived Mughal events and institutions from an early seventeenth century English context, thus limiting any hope of "objective" reporting. To substantiate this assertation, this thesis investigates (a) Roe's life in England and how it related to ongoing literary and political movements; (b) the appearance of Jacobean language and metaphors in his text; (c) and highlighting these incongruencies by examining indigenous Mughal documents. Lastly, the study researches historiographical trends of the colonial era and why they have contributed to the consistent use of this source.

APA, Harvard, Vancouver, ISO, and other styles

9

Balabanlilar, Lisa Ann. "Lords of the Auspicious Conjunction Turco-Mongol imperial identity on the subcontinent /." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1179937403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Jönsson, Kristin. "RF-modul." Thesis, Karlstad University, Faculty of Technology and Science, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-1718.

Full text

Abstract:

Idén med examensarbetet var att konstruera en generell radiolänk med minsta möjliga storlek, som skulle kopplas samman med en redan befintlig konstruktion. Radiokrets CC1100 från Chipcon används tillsammans med mikroprocessor MSP430 från Texas Instruments. För att

radiomodulen skall klara ett stort inspänningsområde används en spänningsstabilisator XC6202 från Torex. Det färdiga kortet är ett fyralagerskort med komponenter på en sida, med ett helt jordplan. Komponenterna är placerade så att de fyller sin funktion, samtidigt som de upptar minsta möjliga utrymme egentligen kanske detta med ska vara dåtid? . Med hjälp av en nätverksanalysator undersöktes antennanpassningen så att denna erhöll ett värde på nära 50

W. Radiokretsen programmerades och testades sedan.

The idea behind this project was to construct a general RF-module as small as possible and the RF-module should be able to connect to an existing design. A transceiver from Chipcon, CC1100, was used together with a microprocessor MSP430 from Texas Instruments. To make

the RF-module handle a wide input voltage range a voltage regulator, XC6202, from Torex was used. The circuit board is a four layer card with one layer ground and components on one side. The components are placed to full fill there purpose and at the same time make the card

as small as possible. With help from a network analyzer the network to the antenna was examined so it obtained a value near 50 W. The RF-module was programmed and tested with good result, but I didn’t participated.

APA, Harvard, Vancouver, ISO, and other styles

11

Kaláb, Ctibor. "Modul parního generátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229195.

Full text

Abstract:

The thesis deals with a project of a steam generator heated with liquid sodium. The first section describes some types of steam generators at nuclear power plants which have been projected or put into use. The next part presents a draft concept of the steam generator, solved by this work. The implementation of the steam generator module has been selected from several options, based on the thermal, hydraulic and stress calculations and on the chosen criteria. The conclusion of this thesis deals with the evaluation of the final solution in terms of nuclear safety and technical solutions, and compares this solution to similar projects following various criteria.

APA, Harvard, Vancouver, ISO, and other styles

12

Rusz, Martin. "Integrovaný zásuvkový modul." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413101.

Full text

Abstract:

The aim of this work is focus on Powerline Communication technology and select a suitable type of broadband integrated circuit for the integration of a broadband communication module into an electrical installation box. In the introduction of this work, the Powerline Communication technology, the principle of communication, individual types of technology, factors influencing the quality of transmission, current possibilities and setting goals necessary for the design of the module are analyzed in detail. The result is a miniaturized functional prototype of a fully integrated broadband PLC modem in a wiring box.

APA, Harvard, Vancouver, ISO, and other styles

13

Lysoň, Jakub. "Bezdrátový modul akcelerometru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220876.

Full text

Abstract:

This master’s thesis describes a wireless accelerometer module. The aim of this work was to study the properties and involvement of the accelerometer, wireless module design for data transfering from the accelerometer to the PC and the module implementation. As a wireless device is used bluetooth module that enables communication between the product and the computer. The wireless module used rechargable lithium ion battery that helps keep module alive without adapter or net cable.

APA, Harvard, Vancouver, ISO, and other styles

14

Olsson, Fredrik. "Konstruktion av UPS-modul." Thesis, Linköping University, Department of Electrical Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1397.

Full text

Abstract:

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

The UPS module consists of two parallel systems. Every system is built out of four parts. Part one consists of batteries and safety circuits, part two charges the batteries, partthree is a control unit, and part four delivers the voltage and current. The delivered voltage is 5 V and the current is 4 A.

Tests and verifications showed that the UPS module could supply a computer system with power for about one minute. The tests have been performed in a lab at AerotechTelub AB.

The UPS module is supposed to be mounted in a cassette. The cassette is then inserted in the computer system through a hole in the chassis. Thereby an opening of the computer system is avoided when the module is connected.

APA, Harvard, Vancouver, ISO, and other styles

15

Forsberg, Andreas, and Christoffer Larsson. "Vidareutveckling av PROFIBUS-modul." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10294.

Full text

Abstract:

Denna rapport beskriver ett examensarbete som gjordes på företaget Motion Control i Västerås AB. Rapporten följer projektets utvecklingssteg och beskriver hur arbetet med att ta fram elektronik och inbyggd programvara för en kommunikationsmodul har framskridit. Kommunikationsmodulen ska fungera som en länk mellan en styrenhet och en I/O-enhet. De inledande delarna av rapporten tar upp undersökningar på kommunikationsprotokollen PROFIBUS och PROFINET som är vanliga kommunikationsmetoder inom industrin. Undersökningarna låg till grund för vilket protokoll som skulle användas i modulen. PROFIBUS valdes och en sådan modul togs fram utifrån de krav som ställdes. Vidare beskriver rapporten hur hårdvara samt den inbyggda programvaran har utvecklats. Vid testerna av modulen verifierades om alla krav och önskemål var uppfyllda. Projektet som helhet var lyckat och efter några mindre hårdvaruförändringar skulle modulen kunna användas i produkter som företaget säljer där PROFIBUS-kommunikation önskas.
This report describes a master thesis which was done at the company Motion Control i Västerås AB. The report follows the project development stages and describes how the process of developing electronics and embedded software for a communication module has progressed. The purpose of the communication module is to serve as a link between a controller and an I/O device. The initial parts of the report consist of studies about the communication protocols PROFIBUS and PROFINET which are standard communication methods in the industry. The studies formed the basis for which protocol to be used in the module. PROFIBUS was chosen and a module was designed based on the determined requirements. Furthermore, the report describes how the hardware and firmware have been developed. The module was tested to verify that all requirements were met. Overall the project was successful and after some minor hardware changes the module could be used in products where PROFIBUS communication is desired.

APA, Harvard, Vancouver, ISO, and other styles

16

Martínek, Jaroslav. "Modul pro monitorování teploty." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217539.

Full text

Abstract:

Content of the Bachelor Thesis covers design and realisation of an unit for multipoint temperature measuring in cooling and freezing equipments in food stores and shops. As a controlling microcomputer is used an Atmel ATMega128, temperature sensors are realised by DS18S20 digital thermometers, connected via 1-wire bus. Unit can read temperature from 32 temperature sensors, includes memory for measured data, real time clock, Ethernet interface and display with buttons for basic user control. Temperatures are measured periodically with user defined interval, values are stored into internal memory and showed on display. Measured data can also be transferred via Ethernet to clinent PC, where can be viewed in form of table and graphs.

APA, Harvard, Vancouver, ISO, and other styles

17

Peša, Jan. "Prednasky.com - Systém jako modul." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236459.

Full text

Abstract:

This diploma thesis first introduces the services of servers Prednasky.com and SuperLectures.com. After analyzing the solution it describes the design and development of a new dedicated video player that combines SuperLectures.com functionality as a web-embeddable HTML5 application.

APA, Harvard, Vancouver, ISO, and other styles

18

Malalan, Nina. "Návratový modul aerologické sondy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417463.

Full text

Abstract:

Metody, jak získat zpět měřicí vybavení pro průzkum horní atmosféry, jsou v současné době značně omezené. Velmi nízká míra návratnosti vedla k návrhu radiosondy na jedno použití, což nutí mnoho světových meteostanic omezit počet provedených denních měření. Snížení frekvence sondáže pak následně vede ke snížení přesnosti předpovědi počasí. Tato práce otevírá cestu k alternativě v podobě konstrukce návratového modulu, který by měl zajistit řízené vyklesání aerologické sondy a přistání na vhodném místě. Zvolená konstrukce je výsledkem analýzy možných konfigurací, jejichž cílem bylo najít nejoptimálnější variantu pro splnění požadavků mise. Konvenční konfigurace s pevnými křídly je zde sledována zkoumáním jejích základních částí. Zvolené součásti jsou dimenzovány na základě dvou krokových iteračních metod detailně popsaných v této práci. Dále jsou zkoumány základní požadavky na autonomii návratového kluzáku. Je zde navržena koncepce řídicího systému, který by měl vybrat nejvhodnější a dostupné místo pro přistání a navést kluzák k přistání na něm. V neposlední řadě jsou analyzovány a zvažovány možné metody instalace užitečného zatížení a studovány a porovnávány možné systémy odpojení od meteorologického balónu. Popsaný návratový modul by měl ve výsledku umožnit častější provádění měření atmosféry s přesnějšími měřicími zařízeními u kterých bude předpoklad vysoké pravděpodobnosti opakovaného použití. Očekává se, že tento přístup by měl vést ke snížení nákladů na sondáž atmosféry a zároveň zredukovat množství použitého materiálu a produkovaného odpadu.

APA, Harvard, Vancouver, ISO, and other styles

19

Lukesle, Václav. "Modul ohřevu elektrozvlákňovací elektrody." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-221046.

Full text

Abstract:

The thesis deals with the principal heating design of the electrospinning electrode. These electrodes are fed with high voltage (tens of kV), which is an essential part of the device for the nanofibres production. This thesis presents the research of possible solutions of the heating and also it analyzes some principles of the nanofibre production. Furthermore, the work presents electrical schematics and PCB of the heating module. The aim of this work is to propose such a solution of heating that makes spinning from melt realizable in the device for 4SPIN ® nanofibres production.

APA, Harvard, Vancouver, ISO, and other styles

20

Kolář, Michal. "Grafický modul databázového projektování." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-240848.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Morávek, Lukáš. "Řídicí modul BLDC motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242079.

Full text

Abstract:

Diploma thesis describes design and realization of hardware and software for controlling and regulation of the high-speed drive with BLDC motor, which will serve as a spindle for CNC milling machine. The thesis described in detail the schematic design and the design of printed circuit board of the power part, control part and power supply part of the three-phase transistor inverter controlled by DSP processor. It is also described in detail program of DSP processor for controlling and regulation of the BLDC motors, which the function is verified by the final measurements. The result of Diploma thesis is functional high-speed drive with BLDC motor.

APA, Harvard, Vancouver, ISO, and other styles

22

Lai, Winnie Chelsea. "Linbo₃ Y-branch optical modul." Thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/29993.

Full text

Abstract:

Y-branch optical modulators are potentially very useful in optical communications because of their non-interferometric nature, making them easier to fabricate and to control than other types of electro-optic switches. They can be used as digital optical switches, time division multiplexers, or in conjunction with a resonator as its electrode to form a high speed optical commutator switch. The main problem with Y-branch modulators to date is that they all have very small branch angles, e.g., less than 0.2°, and hence long electrodes, thereby increasing the device capacitance and reducing the switching speed. By studying a Y-branch optical modulator numerically and experimentally, our objective is to design a Y-branch modulator which has a short electrode and still offers high on/off ratios and high percentage guided power. By using the effective index method along with the 2-D split-step finite difference beam propagation method, a z-cut titanium indiffused lithium niobate Y-branch modulator is simulated for a free space wavelength of 632.8 nm. The parameters varied in the simulations are: maximum refractive index change at the surface of the waveguide, electrode length, branch angle, and applied modulating voltage. Based on the simulation results, a maximum refractive index change of 0.0042 and an electrode length of two-horn-length are used to provide good on/off ratios and percentage guided power while keeping the electrode short. Since the on/off ratios increase with branch angle while the percentage guided power decreases with branch angle, a range of angles between 1.0° and 1.5° are found to provide the preferred operating characteristics. Y-branch modulators with branch angles ranging from 0.5° to 3.0°, and with electrodes of two-horn-length as well as three-horn-length, are fabricated. The fabrication parameters are as specified in the simulations, e.g. waveguides are formed by diffusing 4 µm wide titanium strips at 1050 °C for 6 hours. Previous fabrication problems such as dust accumulation and surface guiding are alleviated. The devices are tested by launching polarized light from a helium neon laser into a polarization-maintaining fibre and then endfire coupling the light into the fundamental TM-like mode of the waveguides. The on/off ratios and percentage guided powers are measured for both devices with two-horn-length and three-horn-length electrodes. These measured results generally compare well with the theoretical values and the behaviours of all the Y-branch are as predicted. Using the 1.5° Y-branch with the two-horn-length electrode (300 µm) as an example, the experimental on/off ratio is 40:1 with a 66% guided power at 75 V while the theoretical values are 44:1 with 62% guided power. We have demonstrated that a Y-branch electro-optic modulator with high on/off ratios and percentage guided power can be realized with short electrodes.
Applied Science, Faculty of
Electrical and Computer Engineering, Department of
Graduate

APA, Harvard, Vancouver, ISO, and other styles

23

Holma, Evert. "Designkoncept för standard hydraulik modul." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-125093.

Full text

Abstract:

Detta examensarbete har genomförts på Outotec i Skellefteå, det är ett finskt företag som levererar process- och automationslösningar för metall-, mineral-, energi- och vattenindustrin. Hydraulik ingår i många av Outotecs maskiner och processlösningar och där har ett önskemål funnits om att ha en mindre hydraulmodul för att driva enklare funktioner som använder sig av cylindrar. Detta examensarbete har gått ut på att ta fram ett designkoncept för en mindre hydraulmodul för att driva cylindrar som används för att köra enklare funktioner i en smältverksanläggning. Arbetet omfattar ett framtagande av ett hydraulschema för modulen där nödvändiga komponenter skall ingå, ett beräkningsunderlag för att kunna välja komponenter till modulen. Samt ett förslag på vilka större och viktiga komponenter som kan användas för systemet och ett designförslag på hur modulen kan komma att se ut vid ett färdigställande. Som ett resultat av detta har ett beslutsunderlag tagits fram för att kunna färdigställa modulen, beslutsunderlaget baseras på beräkningar som är gjorda på de olika cylindrarna samt komponenter som kommer att behövas i modulen. Ett antal av komponenterna är valda och kan ses som en riktlinje för ett slutgiltigt beslut, så det är möjligt att välja en liknande produkt av ett annat fabrikat eller andra dimensioner. Resultatet innehåller även ett hydraulschema som beskriver funktionen för modulen och vilka komponenter som bör ingå då modulen är färdig. Ett förslag på konstruktion och layout är framtaget för modulen, denna innehåller dock inte alla komponenter men de största komponenterna finns med som tank, motor och ackumulator.
This thesis has been conducted at Outotec in Skellefteå, Outotec is a Finnish company that supplies process and automation solutions for metal, mineral, energy and water industries. Hydraulics are included in many of Outotec's equipment’s and process solutions and because of this they have come to the idea of having a smaller hydraulic module for operating simple functions that use hydraulic cylinders. This thesis has been to develop a design concept for this small hydraulic module to operate the cylinders that are used to run simple functions in a metal melting plant. The work includes the development of a hydraulic diagram for the module where the necessary components are included, the calculation basis for selecting components to the module, a proposal on which significant and important components that can be used for the system and a design proposal on how the module might look at a completion. As a result of this, a decision basis was developed in order to complete the module. The decision data are based on calculations made on the components that will be needed in the module and the various functions that the module is supposed to run. The bigger components are selected and can be seen as a guideline for a final decision, so it is possible to choose a similar product but with other dimensions or products from another manufacturer. The result also includes a hydraulic diagram describing the function of the module and which components that should be included when the module is completed. A draft of the design and layout is designed for the module, this does not contain all the components, but the main components are included such as the tank, motor and accumulator.

APA, Harvard, Vancouver, ISO, and other styles

24

Bartoš, Pavel. "Zvukový modul pro platformu FITkit." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2009. http://www.nusl.cz/ntk/nusl-236709.

Full text

Abstract:

This work deals with module of the FITkit platform, which makes it able to play sound files like mp3, ogg, etc. The module also adds to FITkit some new peripherals: color LCD display with touch screen and USB interface, by which we can connect flash drive.

APA, Harvard, Vancouver, ISO, and other styles

25

Volf, Tomáš. "Modul Wiki v informačním systému." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-237041.

Full text

Abstract:

This master's thesis aims to develop own wiki module for information system of our faculty based on knowledge of known wiki systems. The project introduces the basic information and syntax of three wiki systems, specifically MediaWiki, DokuWiki and WikkaWiki; introduces also the WikiCreole project, which tries to set up easier way for users to contribute to different wiki systems that defines common syntax. Then it deals with design and implementation of own wiki module to the information system of faculty. The project also introduces with universal wiki system concept. At the conclusion there is th results evaluation of this master's thesis.

APA, Harvard, Vancouver, ISO, and other styles

26

Macek, Daniel. "CompactRIO modul pro řízení servomotoru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400633.

Full text

Abstract:

The thesis deals with the description of PMSM and BLDC motors as well as the way of their control. In addition, the thesis deals with the description of the instruments of National Instruments, DAQ, CompactRIO and PXI. The details of the user module's production in the CompactRIO device, both hardware and software, are specified in the paper. The following is a description of the proposed CompactRIO module.

APA, Harvard, Vancouver, ISO, and other styles

27

Duz, Aleksei. "Modul pro řízení stejnosměrných motorů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413030.

Full text

Abstract:

This thesis focuses on the design and creation of control unit for DC motors drives. A principle on which the DC motor is based, a method of its control and a possibility to obtain current information about the position are briefly described in this work. After that, the different types of buses for communication with a superior system and justification of the chosen one, are presented. In the next section, there is a special emphasis on creation of the suitable driver model and a design of the elecrical schematic and PCB. The end of the thesis contains a description of commission a PCB and testing the main functions.

APA, Harvard, Vancouver, ISO, and other styles

28

Kudláček, Pavel. "Síťový napájecí modul pro servopohon." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413059.

Full text

Abstract:

The aim of the diploma thesis is to theoretically design and to put the mains power supply module for two-axis servo amplifier TZG 560 with the total power 28kW for the company TG Drives into practice. The analytical design of the power part with the braking circuit, the calculation of power components’ heat balance, EMI filter design and realization of measuring, controlling and indication circuits are described in the thesis. In addition, the mechanical device construction, structure of the controlling program and the results obtained in the verification process of the module functionality are presented.

APA, Harvard, Vancouver, ISO, and other styles

29

Kropáč, Vlastimil. "Vláknový osvětlovací modul pro mikroskopii." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417106.

Full text

Abstract:

This diploma thesis describes the design of the illumination system for a Coherence--Controlled Holographic Microscope (CCHM). The theoretical part mentions the history of microscopy, the principle of holography and individual types of interference microscopy. To get closer to the topic, individual light sources and an overview of current illumination systems are mentioned. The diploma thesis also describes the procedure of designing a fiber-optic illumination module for microscopy from optical design through design of construction to the last step, which is assembly and testing of the module.

APA, Harvard, Vancouver, ISO, and other styles

30

Krasniqi, Petrit, and Ali Al-Sultani. "Utformning av modul till cykeltaxi." Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20453.

Full text

Abstract:

Under det senaste decenniet har fraktcykeln genomgått något av en återupplivning. Historiskt setthar fraktcykeln använts flitigt för leveranser av post och varor för att eventuellt fasas ut av denmoderna bilen. Med tanke på de miljöproblem som då uppstått till följd av människans beroende avbilen har det uppstått en efterfrågan för utsläppsfria fordon. Företag, städer och kommuner harinsett potentialen som dagens fraktcykel besitter för att lösa dessa problem. I kombination meddagens teknik har den kommersiella fraktcykeln utrustats med elmotor vilket möjliggör många nyaanvändningsområden för fraktcykeln. I arbetet har ett koncept av en cykeltaximodul för företaget ifråga tagits fram genom systematisk produktutveckling. Konceptets material har bestämts med hjälpav programmet CES EduPack och dess miljöpåverkan i form av en livscykelanalys har studeratsgenom funktionen EcoAudit i CES EduPack. Konceptet förverkligas genom en 3D-modellering iritningsprogrammet SolidWorks.
During the last decade, the freight bicycle has experienced sort of a revival. Historically, the freightbicycle has been used extensively for deliveries of mail and goods only to become replaced by themodern car. Considering the environmental problems that have come about as a result ofhumanity’s dependence on modern four-wheeled vehicles, a demand for emission-free vehicles hasrisen. Companies, cities and municipalities have realized the potential of the modern freight cycle tosolve these problems. In line with modern technology, commercial freight bicycle has been equippedwith an electric motor, which enables many new areas of applications for the freight bicycle, manyof which the freight bicycle can replace the car as the primary mode of transportation. Some of thepossible uses are delivery of goods in urban environment and metropolitan areas, bicycle cab andmobility service. In this study, a concept of a module for a bicycle taxi has been developed through asystematic product development process. The material for the concept is selected using CES EduPackwhere its environmental impact is also studied by the way of a life cycle analysis using the functionEcoAudit within the same program. The concept is brought to life by a 3D-model using SolidWorks.

APA, Harvard, Vancouver, ISO, and other styles

31

Cortes, Sebastian. "Profilerad PV-modul AvSammansatta Kiselceller." Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik (from 2013), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-84809.

Full text

Abstract:

I denna rapport presenteras en analys av en profilerad solmodul av sammansatta kiselceller. Syftet med detta är att undersöka effektkurvan och I-V diagram på en denna solmodul vid olika infallsvinklar från ljuskällan för att få en förståelse på förluster gentemot en plan-modell. Genom att konstruera en modell med skurna kiselsolceller utgörs mätningar för att få en representation av effektkurvan. Resultatet skall sedan jämföras med en plan-modell, därefter diskuteras resultaten från bägge modellerna.

APA, Harvard, Vancouver, ISO, and other styles

32

Famfulík, Lukáš. "Modul pro sledování mobilních objektů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219329.

Full text

Abstract:

The aim of this thesis is to innovate NCL 07 unit made by NAM system a.s. The new device is intended to have improved parameters and diminished dimensions. It should be fully comparable to similar products on market. In the first part there are described features and individual circuits of NCL07 unit. Further there is done an analysis to suggest modifications leading to reduce proportions of DPS and to enhance other parameters including SW design improvement. Theoretical part deals with selection of main measured values and methods of verification of measurement accuracy. There is also described theoretical basis used in the oncoming sections of the thesis. In the practical part there are presented procedures of designs of innovated product. In the conclusion there will be made testing of new unit and results will be compared to competitive commodities.

APA, Harvard, Vancouver, ISO, and other styles

33

Jurajda, David. "Modul kombinované globální satelitní navigace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220291.

Full text

Abstract:

The thesis objective is design of methodology focused on accuracy measurement in field of GPS/GLONASS receivers. Text is devided into five main parts. The first one is focused on GNSS technology. Second one deals with used coordinate systems and map projections (ETRS89, WGS84, UTM, Gauss-Krüger). Next part discusses statistical methods. Part four is focused on hardware. Then the final part describes experiment realization and obtained data analysis.

APA, Harvard, Vancouver, ISO, and other styles

34

Fojt, Bohumil. "Modul pro řízení DC motorů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229326.

Full text

Abstract:

Subjects this diploma thesis is positional DC motor control with personal designed electronics. Main body the diploma thesis was meet principle DC motor control. Further purposes was apprise of principle signal analyse from rotary incremental sensor and implementation design electronics for positional DC motor control.

APA, Harvard, Vancouver, ISO, and other styles

35

Maršál, Martin. "Elektronický modul pro akustickou detekci." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240831.

Full text

Abstract:

This diploma thesis deals with the design and implementation of an electronic module for acoustic detection. The module has the task of detecting a predetermined acoustic signals through them learned classification model. The module is used mainly for security purposes. To identify and classify the proposed model using machine learning techniques. Given the possibility of retraining for a different set of sounds, the module becomes a universal sound detector. With acoustic sound using the digital MEMS microphone, for which it is designed and implemented conversion filter. The resulting system is implemented into firmware microcontroller with real time operating system. The various functions of the system are realized with regard to the possible optimization (less powerful MCU or battery power). The module transmits the detection results of the master station via Ethernet network. In the case of multiple modules connected to the network to create a distributed system, which is designed for precise time synchronization using PTP protocol defined by the IEEE-1588 standard.

APA, Harvard, Vancouver, ISO, and other styles

36

Sedláček, Petr. "Hybridní modul pro průmyslovou lokalizaci." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242196.

Full text

Abstract:

Tato diplomová práce si klade za cíl návrh hybridního lokalizačního zařízení, které je schopno lokalizace uvnitř i vně budov. Lokalizace uvnitř budov je dosažena pomocí technologie Ultra Wideband a venkovní lokalizace je provedena pomocí kombinace technologie RTK GNSS a PPP pomocí open - source softwaru zvaného RTKLIB. První část textu se zaměřuje na vysvětlení používaných technologií a výběr nejpřesnější technologie pro venkovní lokalizaci. Druhá část se zaměřuje ma vývoj potřebného hardware a software finálního zařízení a na integraci systému pro venkovní lokalizaci do systému pro lokalizaci vnitřní. Výstupem práce je plně funkční zařízení, které je schopné plynulé lokalizace uvnitř i vně budov. Funčnost celého zařízení je dokázána na finálních testech uskutečněných ve vnitřních i venkovních prostorách. Na závěr také práce zmiňuje možná vylepšení celého zařízení, která mohou být v budoucnu provedena.

APA, Harvard, Vancouver, ISO, and other styles

37

Vančo, Erik. "Vstupní modul systému inteligentního domu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-319301.

Full text

Abstract:

The presented thesis deals with the design of the product for intelligent control system for GILD. The first part of the diploma thesis contains a brief summary of the intelligent control system. The thesis is designed schematic diagram of the product, it is also designed printed circuit board according to the product requirements. An integral part of the diploma thesis is the design and implementation of the service algorithm for the product.

APA, Harvard, Vancouver, ISO, and other styles

38

Janeček, Vít. "Modul rozšiřující funkcionalitu GDPR řešení." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2018. http://www.nusl.cz/ntk/nusl-385988.

Full text

Abstract:

The goal of this thesis is to introduced the principles of access control technologies, the General Data Protection Regulation and the software for data leakage protection. An essential part of the work is a draft and implementation of the expansion module for user device authentication including shared storage access authorization. Therefore, this module allows to verify whether a user can access shared corporate resources. It also allows to enable or disable access based on specified attributes, such as the type of the protected service or user permission. The basic verification of the module's functionality is realized through different sets of tests and a virtual environment that simulates the corporate environment. The result of the draft is a module that allows to verify access based on the device, and this module is moreover integrated into the Safetica security platform.

APA, Harvard, Vancouver, ISO, and other styles

39

Škrabalová, Denisa. "Holografický modul pro světelnou mikroskopii." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402635.

Full text

Abstract:

The new arrangement of the off-axis holographic module, which is using polarizationactive diffraction grating divides signal into reference and subject wave of an interferometer based on their polarization. However, current design of the module does not have a possibility to tune a length of the optical paths. Thus the inability to tune optical paths leads to a reduced quality of interference structure during observation of biological samples. The current module is only suitable for technical applicating due to this limitation. Possibility of tuning branches is key step in biological applications. Therefore a new computer-controlled module is created in order to enable use for biological samples.

APA, Harvard, Vancouver, ISO, and other styles

40

Lundberg, Martin. "Anslutning av WiFi modul till processorplattform." Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-12241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Novitchi, Dumitru. "Uživatelské rozhraní pro adaptivní RCL modul." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377134.

Full text

Abstract:

The purpose of this thesis is to create an simple graphic library in the programming C language, through which it will be possible to draw and simulate the basic functions of a car backlight, and subseguently to create the graphic user interface.v The first part of the thesis is based on the study of the given issue, briefly it describes the differences between raster and vector graphics,most used formats, describes diverse color models and the area of their use, ,basic graphic adapters, video memorry and its control in the operating system Linux. In the second part there is stated the practical realization of the basic graphic algorithms needed for drawing the algorithm primitives. An mathematical aparatus described in detail and well-founded with formulas. Also there are the advantages and disatvantages of each used algorithm and their realization in the programming C language. The 3rd and the last part of the thesis is dedicated to the creation of the graphic user interface in the FreePascal programming language and further to the describtion of his main elements.

APA, Harvard, Vancouver, ISO, and other styles

42

Hanuš, Ivan. "USB měřicí modul pro virtuální instrumentaci." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221295.

Full text

Abstract:

The objective of this thesis is design of the universal USB measuring module for virtual instrumentation. The module is connected to PC via USB interface. The module have analog inputs and analog outputs. The inputs have some switchable ranges, adjustable high-pass and low-pass fiters. Also the module have the digital input-output unit with 8 channels with configurable data direction and voltage level. Physical layer for digital serial interfaces SPI/UART and I2C is also part of this unit. The module is able to communicate with LabVIEW enviroment. The teoretical part contains survey of the commercial USB modules for data acquisition and generation from various manufacturers with its basic parameters. Some selected modules are described in detail. Furthermore the thesis deals with possibilities of connecting the USB module with the LabVIEW enviroment. The practical part deals with the design of input-output circuits and with design of the module itself. Furthemore, tho communication protocol, utility library and demonstration LabVIEW software are described in this part. At the end of this part, there are results of verification measurements. The result of this thesis is completed universal USB measuring module with utility library and demonstration program.

APA, Harvard, Vancouver, ISO, and other styles

43

Šoustar, Jiří. "Modul rozhraní Ethernet pro platformu FITkit." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2008. http://www.nusl.cz/ntk/nusl-235428.

Full text

Abstract:

This graduation thesis is aimed at design and implementation of embedded systems, network communication and support of the network communication for embedded systems. Furthermore it introduces school platform FITkit and offers a conceptional extension of the network interface for this platform based on Ethernet network standard. Based on that conception I'm trying to find and describe suitable solution for FITkit platform which realizes a network interface as a form of extension module capable of development supporting.

APA, Harvard, Vancouver, ISO, and other styles

44

Linhart, Lukáš. "Modul pro správu nastavení systému NLPIS." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236559.

Full text

Abstract:

This master's thesis is focused to create a module for management of settings of NLPIS system. The module will serve to make using of the NPLIS system easier, focusing especially on the session management improvements. The topic contains introduction of the issue, description of the NLPIS system and its technologies, as well as various solution drafts and final implementations including testing are covered in the thesis. The main focus is on improving user experience by simplifying the interface and hence making their work more effective.

APA, Harvard, Vancouver, ISO, and other styles

45

Sláma, Pavel. "Modul online testování v informačním systému." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2007. http://www.nusl.cz/ntk/nusl-236809.

Full text

Abstract:

This thesis is trying to find its way in extensive area of relatively new problems of E-learning. E-learning has come together with fast advancement of the Internet trying to make education more comfortable and faster and at the same time trying to lower its dependency on the human resources. A lot of a development of the online tests is still needed. However, it is important to make clear the rules of the "game" and to press for their integration. The first goal to achieve the full-value system which would be able to substitute the conventional methods of education is to find out and solve the issues of testing in general, to analyze the requirements and to create data format for the data portability, which is required because of the mutual communication between different systems. On these bases it is possible to design the database scheme and then the complete system.

APA, Harvard, Vancouver, ISO, and other styles

46

Kudláč, Vladan. "Modul pro výuku výslovnosti cizích jazyků." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2021. http://www.nusl.cz/ntk/nusl-445584.

Full text

Abstract:

Cílem této práce je vylepšit implementaci modulu pro mobilní aplikace pro výuku výslovnosti, najít místa vhodná pro optimalizaci a provést optimalizaci s cílem zvýšit přesnost, snížit čas zpracování a snížit paměťovou náročnost zpracování.

APA, Harvard, Vancouver, ISO, and other styles

47

Ježek, Jan. "Statistický modul k pracovní databázi TIVOLE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217191.

Full text

Abstract:

Presented thesis thesis is written for IBM Company, specifically IBM IDC Czech Republic, s.r.o. branch. The thesis describes development of statistic module for work database TIVOLE utilizing Lotus Notes program. The basic aim of the thesis is to ease creation of reports and graphical data outputs in relation to speed of operator´s work while narrowing down the required time of human resources for solving problems.

APA, Harvard, Vancouver, ISO, and other styles

48

Feilhauer, Petr. "Vstupní modul elektronického rychloměru RE 1xx." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218381.

Full text

Abstract:

This master’s thesis contains a basic description of the function and wiring of Electronic tachograph RE1xx from company UniControls - Tramex. The main objectives of this thesis are design and implementation of a functional module, combining the four frequency inputs, two analog inputs and eight digital inputs. The proposed module must be fully compatible with current system of Electronic tachograph and must be according by the basic technical-law standards, which refer of this branch for application this device. Based on the analysis of methods of processing various signals are proposed several concepts of the input module. Individual concepts are described with advantages and disadvantages. On the design concept of this module, followed by a description of the speed sensor, is placed on the redress of vehicle. Design of circumferential involvement of the chosen conception is detailed described and divided into several parts (controlling part, frequency inputs, analog inputs, binary inputs). In this module is accent on increased reliability and interoperability, which is achieved by using for example: power monitor, external watchdog, etc. For realization prototype is a part of thesis design of the PCB. Thesis includes theoretical calculations, which is needed for the design of software. On a functional input module is developed and debugged operating firmware, which is based on single-fiber design of the program. To measure the actual speed are debugged two algorithms - method of periodic sampling and the method of external interrupt. The following is a description of the measurement and processing of analog and digital signals (used algorithms suppress oscilation of input signals). The result of this master’s thesis is functional Module of frequency, analog and digital inputs, which measures vehicle speed, distance covered, direction of movement, two analog signals and evaluates states of the binary signal. Preprocessed data are sent to a Module of central processor through serial communications RS485.

APA, Harvard, Vancouver, ISO, and other styles

49

Zachar, Jiří. "Komunikační modul pro řízení laboratorního zdroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218604.

Full text

Abstract:

The aim of this work is to design a communication module for laboratory source Manson. This power supply communicates only through a serial RS-232 link. Modern computers usually use for the connection with other peripherals mainly USB. Designed communication module contains converter between the RS-232 and USB. Power supply is used in the automated measurement setup, which is controlled from the Virtual Engineering Environment from the Agilent Technologies. Direct commands for laboratory source Manson are not compatible with the SCPI (Standard Commands for Programmable Instruments) standard commands. So, the communication module converts commands from the SCPI format to Manson supply instructions. The communication with the Manson supply will be obvious for students by using new communication module.

APA, Harvard, Vancouver, ISO, and other styles

50

Hrbáček, Jan. "Inteligentní dálkoměrný modul pro robotického fotbalistu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218900.

Full text

Abstract:

Diplomová práce se zabývá vývojem dálkoměrného modulu určeného pro rozšíření senzorické výbavy fotbalového robotu kategorie MiroSot. Tento modul na vstupu přijímá data ze senzorické jednotky vyvinuté na Ústavu automatizace a měřicí techniky a z těchto dat extrahuje polohu míčku. Je srovnáno využití neuronové sítě a zjednodušené Houghovy transformace pro získání polohy těžiště míčku. V práci je popsána pomocná implementace funkcionality v prostředích MATLAB a C#.NET i hlavní implementace pro signálový mikrokontrolér Freescale MC56F8013. Výsledný modul splňuje nároky zadání a je plně funkční.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'Mogul'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles