Log in

Relevant bibliographies by topics / Mold flow analysis

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Mold flow analysis'

Author: Grafiati

Published: 2 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mold flow analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mold flow analysis"

1

Brezinová, Janette, Miroslav Džupon, Ján Viňáš, Jakub Brezina, and Ján Hašuľ. "Analysis of Tribodegradation Factors Limiting the Life of the Molds." Defect and Diffusion Forum 422 (March 24, 2023): 57–62. http://dx.doi.org/10.4028/p-8qg71v.

Full text

Abstract:

The paper presents the results of research focused on the analysis of mold wear for high-pressure casting of aluminum alloys. The functional parts of the molds were taken out of operation. Molded parts for aluminum alloy casting molds and cores are made of tool chrome and chromium-molybdenum steels. In the die-casting process, the mold parts and cores are exposed to intense thermal, mechanical, and chemical loads. High melt flow rates of aluminum alloys (up to 120 m.s-1), high pressures (up to 120 MPa) and high maximum surface temperatures of mold parts (up to 550 °C) lead to erosion, abrasion

APA, Harvard, Vancouver, ISO, and other styles

2

Yang, Jun Kai, and Yun Jie Xu. "Mold Flow-Based Mold Flow Analysis of Copier Parts and its Solution Optimization." Advanced Materials Research 538-541 (June 2012): 1072–75. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1072.

Full text

Abstract:

Mold flow software is used to conduct mold flow analysis of copier parts, simulate its filling and cooling process, and predict possible defects in the product design process in order to determine the formability of plastic parts and product quality. The optimal mold structure can be obtained by comparing different solutions so as to save production costs and improve product quality and efficiency.

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, B. H., and M. C. Ramesh. "Automatic Runner Balancing of Injection Molds Using Flow Simulation." Journal of Engineering for Industry 117, no. 4 (1995): 508–15. http://dx.doi.org/10.1115/1.2803528.

Full text

Abstract:

The objective of this paper is to present a methodology for automatically balancing multi-cavity injection molds with the aid of flow simulation. After the runner and cavity layout has been designed, the methodology adjusts runner and gate sizes iteratively based on the outputs of flow analysis. This methodology also ensures that the runner sizes in the final design are machinable. To illustrate this methodology, two examples are used wherein a 20-cavity mold and a 3-cavity mold are modeled and filling of all the cavities at the same time in both cases is achieved. In the case of the 20-cavity

APA, Harvard, Vancouver, ISO, and other styles

4

Luo, J., X. Liu, and X. Wang. "Analysis of Temperature Field, Heat and Fluid Flow of Two-Phase Zone Continuous Casting Cu–Sn Alloy Wire." Archives of Foundry Engineering 16, no. 1 (2016): 33–40. http://dx.doi.org/10.1515/afe-2015-0099.

Full text

Abstract:

Abstract Cu–4.7 wt. % Sn alloy wire with Ø10 mm was prepared by two-phase zone continuous casting technology, and the temperature field, heat and fluid flow were investigated by the numerical simulated method. As the melting temperature, mold temperature, continuous casting speed and cooling water temperature is 1200 °C, 1040 °C, 20 mm/min and 18 °C, respectively, the alloy temperature in the mold is in the range of 720 °C–1081 °C, and the solid/liquid interface is in the mold. In the center of the mold, the heat flow direction is vertically downward. At the upper wall of the mold, the heat fl

APA, Harvard, Vancouver, ISO, and other styles

5

Zhang, Xiao Jun, Hai Zhang, and Ze Ning Xu. "Finite Element Analysis of Flow Field and Temperature Field in Continuous Casting Mold." Advanced Materials Research 601 (December 2012): 270–74. http://dx.doi.org/10.4028/www.scientific.net/amr.601.270.

Full text

Abstract:

Researching on continuous casting mold at a domestic steel slab, the coupled models of flow field and temperature field inside of mold were established in finite element analysis software ANSYS, and the flow field and temperature field of liquid steel in mold was simulated. The effect on flow field and temperature field in continuous casting mold caused by change of the withdrawal speed was mainly discussed in this paper. The simulation results show that the change of withdrawal speed has little effect on flow field and much effect on temperature distribution in mold. The simulation results ar

APA, Harvard, Vancouver, ISO, and other styles

6

Shojaei, Akbar, and A. Spah. "A Theoretical Analysis on Resin Injection/Compression Molding." Key Engineering Materials 334-335 (March 2007): 209–12. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.209.

Full text

Abstract:

In the present investigation, mold filling process of resin injection/compression molding (RI/CM) is compared with resin transfer molding (RTM) for simple mold geometry. To do this, analytical solutions are obtained for RI/CM in unidirectional flow. Based on the analytical solutions, flow front progression and pressure distribution are compared with RTM at different fiber content. The results indicate that the RI/CM reduces the mold filling time significantly, particularly for composite parts with higher fiber content.

APA, Harvard, Vancouver, ISO, and other styles

7

Tasaki, Ryosuke, Hideto Seno, Kunihiro Hashimoto, and Kazuhiko Terashima. "Pressing Control Design Based on Analysis of Metal Temperature and Flow in Sand Mold Press Casting." Materials Science Forum 925 (June 2018): 491–98. http://dx.doi.org/10.4028/www.scientific.net/msf.925.491.

Full text

Abstract:

The sand mold press casting method is a novel iron casting process, which has developed by our group in recent years. The proposed method can cast iron into complex shapes with a high yield over 90% and produces high-quality products by filling control of molten metal during pressing motion. However, molten metal inside mold is cooled down by heat transfer to the molds and atmosphere, and often causes solidification before the end of press. Then, the pressing movement of the upper mold is blocked by the solidified metal. Therefore, to avoid the solidification during pressing sand mold, metal t

APA, Harvard, Vancouver, ISO, and other styles

8

Huang, Shih Miao, Rong Yuan Jou, Jui Chang Lin, and King Sun Lee. "Study of Mold Design on SD Card with 3D Mold-Flow Analysis." Key Engineering Materials 364-366 (December 2007): 629–33. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.629.

Full text

Abstract:

This research applies 3D mesh mold-flow analysis to analyze the SD (Secure Digital) card. It aims at temperature of the mold and plastic. The proper mold filling temperature is found by simulation analysis to improve the short shot situation, and seeks the cause of warping via various processed conditions. SD memory card clip has a big variation in thickness. Due to the bigger flow resistance the plastic is difficult to reach thinner portion, even hot plastic is also difficult to supply. The temperature of plastic goes down as a result of the cold mold cavity. Thus, the plastic does not reach

APA, Harvard, Vancouver, ISO, and other styles

9

Yang, Jun Kai, and Yun Jie Xu. "Warpage Analysis of Injection Molding Based on Mold Flow." Advanced Materials Research 538-541 (June 2012): 1192–96. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1192.

Full text

Abstract:

The most common issue in injection molding is warpage of work pieces. Copier parts are taken as the example. The mold flow software is used to analyze and solve defects of such parts, and the optimal mold structure can be obtained so as to save costs and improve product quality and efficiency.

APA, Harvard, Vancouver, ISO, and other styles

10

Lee, Yongsun, Jinrae Cho, and Seongryeol Han. "Optimization of Injection Molding of Automotive Plastic Horn Cover Part Using Taguchi Method and Reverse Engineering." Materiale Plastice 58, no. 4 (2022): 114–29. http://dx.doi.org/10.37358/mp.21.4.5537.

Full text

Abstract:

The aim of the paper consisted in the development of an injection mold for plastic horn cover parts in commercial vehicles. Three mold types were designed in anticipation of the structure and quality of molds, and injection molding numerical analyses were conducted for the three types of molds. One mold type was selected in consideration of the resin flow patterns inside the mold, surface quality, and final deflection amount of the horn cover. To perform optimal injection molding using the selected mold, optimization of injection molding parameters was performed using the Taguchi method, one o

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Mold flow analysis"

1

Sanchez, Urbina Israel. "Optimizing flow of plastic PBT with 45% glass and mineral fiber reinforcement in an injection over mold process using Taguchi, CPk and mold flow simulation software approaches." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2009. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mazahir, Syed Makhmoor. "Improvement in Orientation Predictions of High-Aspect Ratio Particles in Injection Mold Filling Simulations." Diss., Virginia Tech, 2013. http://hdl.handle.net/10919/50654.

Full text

Abstract:

Glass fiber based polymer composites based injection molded parts provide a light-weight high-strength alternative for use in automobile applications. These composites have enhanced mechanical properties compared to those of pure polymers, if the fibers are oriented in the right direction. One of the major challenges in processing of these composites is to control the fiber orientation in the final product. <br />The evolution of short glass fiber orientation in a center-gated disk was experimentally determined along the radial direction at three different heights representative of the shell,

APA, Harvard, Vancouver, ISO, and other styles

3

Raschke, Kristin. "Grundlagenuntersuchungen zur Prozess- und Struktursimulation von Phenolharzformmassen mit Kurz- und Langglasfaserverstärkung." Doctoral thesis, Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-229327.

Full text

Abstract:

Thermisch und mechanisch hoch beanspruchte Bauteile im Automobil erfordern den Einsatz hochbeständiger Werkstoffe, bei gleichzeitig niedrigen Materialkosten und effizienter Verarbeitung. Rieselfähige Phenolharzformmassen zeichnen dabei eine Werkstoffklasse aus, die aufgrund ihres Eigenschaftsprofils neue Anwendungsbereiche für einen polymeren Werkstoffeinsatz ermöglichen können. Im Rahmen der vorliegenden Arbeit werden im Hinblick auf eine Bauteilentwicklung mithilfe der integrativen Simulation die Grundlagen einer ganzheitlichen Simulationskette der Prozess- und Struktursimulation von rieself

APA, Harvard, Vancouver, ISO, and other styles

4

Scicluna, Helen. "An analysis of the relationship between mood states, sense of self, flow and personal constructs in anorexia nervosa participants." University of Sydney. Psychological Medicine, 2001. http://hdl.handle.net/2123/836.

Full text

Abstract:

Public view removed at the authors request. 16/07/2006<br>The daily experience of anorexia nervosa sufferers has not previously been studied and yet it is fundamental to understanding anorexia nervosa. This study examined and compared the daily experiences of anorexia nervosa patients and control participants in terms of sense of self, mood states and flow states. Flow is characterised by undivided concentration and interest in an activity for intrinsic benefits. Flow is not always desirable, as some ways of experiencing it may be harmful to the individual and society. Anorexia nervosa partici

APA, Harvard, Vancouver, ISO, and other styles

5

Yoland and 張琦緯. "Mold-Flow Analysis Aided Manufacture of Frontal Bumper Mold." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/13980140054599870375.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>94<br>The research utilizes the techniques of mold-flow analysis to analyze the design and manufacture of frontal bumper mold. Bumper mold is a huge one and therefore needs a huge injection machine for molding trial. This needs large fees for the trial. We therefore introduce the technique of computer-aided engineering analysis for the molding process in order to predict the possible areas of defect and therefore improve the design on the computer screen rather than with the process of molding test. This paper utilizes the Moldflow Plastics Insight software to analyze

APA, Harvard, Vancouver, ISO, and other styles

6

Wu, Po-Shien, and 吳柏賢. "The Mold Flow Analysis and Case Study of Plastic Mold." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/25k77j.

Full text

Abstract:

碩士<br>崑山科技大學<br>機械工程研究所<br>96<br>As the economy grows up and national income increases in Taiwan, people need requirement in substance more and more. According the mould is used in multipurpose way and demand is growth, we figure out that the business is increasing. It is valuable to study the mould industry environment and observe its development. The mould industry of Taiwan is now facing a competitor from China. It is more and more difficult to extend the market. The most effective way is to adjust marketing plan and creative new product to oppose China or other nations. The mould industry

APA, Harvard, Vancouver, ISO, and other styles

7

JI, QIAO-DONG, and 紀喬棟. "Application of using Mold-Flow Analysis in chair mold process." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/78178061187893448954.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>94<br>Plastic Injection molding was an important process of manufacturing. In this new age, designers combined product design with molding fabrication and mold-flow analysis to complete the simulation that made sure of availability for manufacturing product. The software of mold-flow analysis had been widely used gradually, but the design of product was become more complicated day by day. The traditional 2.5 dimensional mesh method has been already unable to satisfy the product requirement .So this study used 3 dimensional fusions to create mesh. This study, mold-flow

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Bo-Chen, and 劉柏辰. "Baby Seat Holder Mold Flow Analysis." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/11023447944921398651.

Full text

Abstract:

碩士<br>高苑科技大學<br>機械與自動化工程研究所<br>102<br>Stroller is foldable in recent market, the major advantage is to easy carry out. For the safety consideration, baby stroller is made of metal. Because the hard working and overweight of metal, we use plastic material to reduce total weight of stroller and easy to formation into multi style through creative idea. This research is stroller cushion set, the length :670mm, width:120mm, height:195. We choose two types of stroller, one is solid, the other is hollow. Moldex3D R12 software is used to simulate plastic injection process, the material MIM_316、PA6

APA, Harvard, Vancouver, ISO, and other styles

9

JHAN, WEI-SHENG, and 詹為盛. "Mold Flow Analysis for Plastic Glasses." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/47322802938486203144.

Full text

Abstract:

碩士<br>高苑科技大學<br>機械與自動化工程研究所<br>104<br>Abstract In this paper, using Moldex3D mold flow analysis software, analysis of plastic glasses. Plastic glasses material is selected Moldex 3D material library PC CALIBRE 302 5 DOW and PMMA ACRYREX CM205 CHI-MEI, progress in the use of the gate and into the gate at a different gate and materials analysis. Materials analysis process, PMMA ACRYREX CM205 CHI-MEI progress gate volumetric shrinkage, X warp direction, Y direction warp, Z warp direction, optimum residual stress; PC CALIBRE 302 5 DOW Further progress gate Total the amount of displacement warping

APA, Harvard, Vancouver, ISO, and other styles

10

Yu, Li-Mou, and 余溧謀. "Mold Flow Analysis of Automobile Bumper." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/9pu249.

Full text

Abstract:

碩士<br>國立虎尾科技大學<br>車輛工程系碩士班<br>104<br>In the plastic molding process, in addition to have a good product design, mold design and material properties, but also have the appropriate process parameters, the conventional process parameters depends on accumulated experience use trial and error method to find a better parameters, but this is often use of more time and money; now you can improve defect through Computer Aided Engineering(CAE) before manufacture of molds, to reducing time and cost by test mode and repair mode to improve products profit . This research investigate the mold flow analysis

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Mold flow analysis"

1

Kennedy, Peter, and Rong Zheng. Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.3139/9781569905227.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

1947-, Zheng Rong, ed. Flow analysis of injection molds. 2nd ed. Hanser Publishers, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kennedy, Peter, and Rong Zheng. Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Flow analysis of injection molds. Hanser Publishers, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Mold flow analysis"

1

Huang, Shih Miao, Rong Yuan Jou, Jui Chang Lin, and King Sun Lee. "Study of Mold Design on SD Card with 3D Mold-Flow Analysis." In Optics Design and Precision Manufacturing Technologies. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.629.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kuang, Tangqing, and Wenjuan Gu. "Optimum Design of Runner System for Router Cover Based on Mold Flow Analysis Technology." In Computer and Computing Technologies in Agriculture IV. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-18369-0_65.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Singh, Anand Raj, Kartikey Mishra, Dheeraj Rawat, et al. "Design and Flow Analysis of Injection Mold for Car Indoor Bezel Using Simulation Software." In Springer Proceedings in Materials. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5959-0_30.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Panda, Sudhanshu Bhushan, Narayan Chandra Nayak, and Antaryami Mishra. "Characterization and Optimization of Tool Design of an Injection Molded Part Through Mold-Flow Analysis." In Advances in Data Science and Management. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0978-0_45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Xie, Xin, Dengfu Chen, Mujun Long, Leilei Zhang, Jialong Shen, and Youguang Ma. "Numerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra-thick Slab Continuous Casting Mold." In Materials Processing Fundamentals. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118662199.ch7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Xie, Xin, Dengfu Chen, Mujun Long, Leilei Zhang, Jialong Shen, and Youguang Ma. "Numerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra-thick Slab Continuous Casting Mold." In Materials Processing Fundamentals. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48197-5_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kennedy, Peter, and Rong Zheng. "Governing Equations." In Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kennedy, Peter, and Rong Zheng. "Material Properties of Polymers." In Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kennedy, Peter, and Rong Zheng. "Introduction." In Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Kennedy, Peter, and Rong Zheng. "Effects of Crystallization on Rheology and Thermal Properties." In Flow Analysis of Injection Molds. Carl Hanser Verlag GmbH & Co. KG, 2013. http://dx.doi.org/10.1007/978-1-56990-522-7_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mold flow analysis"

1

Xiong, Kexiang. "Adaptive Grid Optimization Algorithm for Mold Flow Analysis to Improve Computational Efficiency." In 2024 6th International Conference on Intelligent Control, Measurement and Signal Processing (ICMSP). IEEE, 2024. https://doi.org/10.1109/icmsp64464.2024.10866948.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Achor, Zineb, Mohamed Ennaji, Yassine Zahraoui, Souad Tayane, and Jaafar Gaber. "Mold Flow Analysis of Panel Mount Connector: PPO vs. PBT for Performance Optimization." In 2025 5th International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET). IEEE, 2025. https://doi.org/10.1109/iraset64571.2025.11008150.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tajallipour, Nima, Patrick J. Teevens, Wale Akanni, Henk Chin A. Lien, and Amresh Mohan. "Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) for the Tambaredjo North West (TNW) Pipeline." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05677.

Full text

Abstract:

Abstract This paper summarizes the pre-assessment, indirect examination (i.e. internal corrosion predictive modeling (ICPM)), detailed examination and post-assessment results of a multiphase-flow internal corrosion direct assessment (MP-ICDA). This assessment was performed using an in-house internal corrosion predictive model on a header pipeline in the Tambaredjo North West (TNW) oil field in Suriname. This pipeline has a total length of 4,801 m, with a 10 inch nominal diameter region which is 415 m long and a 14 inch nominal diameter region which is 4,386 m long carrying multiphase crude oil

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Langping, Junle Lei, and Xuanjun Dai. "Design and Optimization of Injection Mold for Camera Shell Based on Mold Flow Analysis." In ISBDAI '18: International Symposium on Big Data and Artificial Intelligence. ACM, 2018. http://dx.doi.org/10.1145/3305275.3305316.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Benner, Jingru, Vedang Chauhan, Rebecca Shannon, Anthony Devita, and Jingzhou Zhao. "THERMAL ANALYSIS OF PREFORM FABRICATION FOR FLOW MOLD CASTING." In 7th Thermal and Fluids Engineering Conference (TFEC). Begellhouse, 2022. http://dx.doi.org/10.1615/tfec2022.mpm.040800.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Yulong, Cheng Zhong, Xu Peng, et al. "Comparative Analysis of Flow Capability of Epoxy Molding Compound between Spiral Structure and Actual Mold by Mold Flow Simulation." In 2022 23rd International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2022. http://dx.doi.org/10.1109/icept56209.2022.9873387.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lai, Jiing-Yih, Pei-Pu Song, Chia-Hsiang Hsu, and Yao-Chen Tsai. "Recognition and Simplification of Holes in CAD Models of an Injection Mold for Mold Flow Analysis." In CAD'19. CAD Solutions LLC, 2019. http://dx.doi.org/10.14733/cadconfp.2019.1-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Duan, Yi, Xiyou Wang, Daoguo Yang, Jing Wang, Weibin Ye, and Yanchen Wu. "Mold Flow Analysis of a SiP Package for Power Management." In 2020 21st International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2020. http://dx.doi.org/10.1109/icept50128.2020.9202517.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hong-mei Kang, Yuan-sheng Wang, and Lin-hong Xu. "Mold-Flow analysis in injection molding process of fan back cover." In 2010 International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2010. http://dx.doi.org/10.1109/mace.2010.5536521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Barron, Miguel A., Jesus Gonzalez, Raul Miranda, Gabriel Plascencia, and Isai´as Hilerio. "CFD Analysis of Multiphase Flow in a Slab Continuous Caster Mold." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13207.

Full text

Abstract:

In order to analyze the influence of a third phase in the behaviour of the free surface profile in the mould of a slab steel continuous caster, multiphase flow in a mould water model is physically and numerically investigated. A one third scale mould water model was constructed in accordance with the Froude similarity criterion. The free surface profile in the experimental air-water system was tracked using ultrasonic level sensors which were located at six different positions along a line between the submerged entry nozzle and the mould narrow wall. Volumetric flow rates of water from 3.5×10-

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mold flow analysis"

1

Orenstein, Nicholas P. 3D Flow and Temperature Analysis of Filling a Plutonium Mold. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1088904.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Elliott, D. L., and J. C. Barnard. Detailed analysis of the wake and free-flow characteristics at the Goodnoe Hills MOD-2 site. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5999280.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!