Relevant bibliographies by topics / Motor shield

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Motor shield'

Author: Grafiati

Published: 4 June 2025

Last updated: 15 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Motor shield.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Motor shield"

Gedzurs, Aleksejs. "Fault Diagnosis of Low-Power Three-Phase Induction Motor." Rural Sustainability Research 36, no. 331 (2016): 34–41. http://dx.doi.org/10.1515/plua-2016-0012.

Full text

Abstract:

Abstract An Induction motor reliability survey at an egg processing plant shows that almost 50% of the total motor failures are fan induction motors. Visual investigations of the faulty fan motors show that the main cause of the induction motor failure is air gap eccentricity. In this study, experimental tests are performed on a 1.1kW three-phase induction motor to detect air gap eccentricity and overheating of the induction motor. Heating tests show that end shield housing temperature reaches 100°C with blocked air flow from the fan, which can reduce the lifespan of the bearing. Dimension mea

APA, Harvard, Vancouver, ISO, and other styles

Lakshmi,, D. Sri, and V. Rangavalli. "Floor Cleaning Robot." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 04 (2025): 1–9. https://doi.org/10.55041/ijsrem44572.

Full text

Abstract:

The “Floor Cleaning Robot” utilizing the Arduino Uno is an innovative robotic system aimed at automating floor cleaning processes, incorporating both dry and wet cleaning functionalities into a single design. This project focuses on achieving autonomous navigation, obstacle detection, and efficient cleaning using cost-effective and user-friendly technology. The system is built upon the Arduino Uno microcontroller board, integrating essential components such as servo motors, DC motors, ultrasonic sensors, and the Motor Shield L298. The ultrasonic sensor enables obstacle detection, while the Mot

APA, Harvard, Vancouver, ISO, and other styles

Kuznetsov, Yury, Igor Kravchenko, Dmitry Gerashchenkov, et al. "The Use of Cold Spraying and Micro-Arc Oxidation Techniques for the Repairing and Wear Resistance Improvement of Motor Electric Bearing Shields." Energies 15, no. 3 (2022): 912. http://dx.doi.org/10.3390/en15030912.

Full text

Abstract:

Reliability is one of the most important requirements for electric motor installations. Bearing assembly is a common source of failure for most electric motors. One of the main reasons for such failures is the wear of the bearing seat of the end shield. This paper presents a combined technology for increasing the durability of the bearing bores of electric motor bearing shields made of aluminum alloys. The technological concept is that a worn-out end-shield bore is firstly restored by supersonic gas-dynamic spraying, and secondly, in order to improve anti-wear properties, it is strengthened by

APA, Harvard, Vancouver, ISO, and other styles

UTAMA, Satriya, Deddy El AMIN, M. Arif SAIFUDIN, et al. "Magnetic Shielding Implementation in the Small Satellite Reaction Wheel." INCAS BULLETIN 16, no. 1 (2024): 107–16. http://dx.doi.org/10.13111/2066-8201.2024.16.1.11.

Full text

Abstract:

Low Earth orbit satellites face challenges from Earth's magnetic field, causing attitude disturbances. Attaining a magnetic-dipole-free satellite is crucial. Layout optimization and in-orbit dipole compensation are common methods, but layout optimization can be impractical. In contrast, in-orbit dipole compensation struggles with rapidly changing magnetic dipoles like those from reaction wheel motors. This research proposes an alternative solution using Mu-metal, known for shielding against magnetic exposure. This shield can be applied to trap the magnetic field generated by the motors. Ground

APA, Harvard, Vancouver, ISO, and other styles

Pluk, K. J. W., J. W. Jansen, and E. A. Lomonova. "Magnetic Shielding for Coreless Linear Permanent Magnet Motors." Applied Mechanics and Materials 416-417 (September 2013): 45–52. http://dx.doi.org/10.4028/www.scientific.net/amm.416-417.45.

Full text

Abstract:

This paper concerns the local reduction of the magnetic flux density by means of magnetic shielding. Using a spatial frequency description, a 2-D semi-analytical periodic model is obtained for a coreless single-sided linear permanent magnet motor. The magnetic shield is included in the modeling using mode-matching. The obtained magnetic flux density is compared to a finite element model and is verified with measurements. The results show a reasonable agreement between the semi-analytical model and the measurements. Some large deviations occur due to the modeling assumption that the shield has

APA, Harvard, Vancouver, ISO, and other styles

Lestari, Dewi, and Muhammad Rizki Daimunte. "Rancang Bangun Home Automation Berbasis Ethernet Shield Arduino." Al-Fiziya: Journal of Materials Science, Geophysics, Instrumentation and Theoretical Physics 3, no. 1 (2020): 21–28. http://dx.doi.org/10.15408/fiziya.v3i1.15249.

Full text

Abstract:

AbstrakHome Automation system adalah sistem otomatisasi rumah yang dapat membuat rumah menjadi lebih hemat dengan penggunaan energi listrik yaitu dengan cara meng-on/off-kan berbagai peralatan seperti lampu , ac, kipas angin, tv, pompa air, motor pagar, motor garasi, motor gorden dan lain-lain. Home automation pada penelitian ini menggunakan Ethernet shield Arduino, empat buah lampu, dan sensor DHT22 untuk mengkontrol temperatur dan kelembaban. Home Automation yang telah dibuat dapat bekerja baik dan lancar dengan kecepatan respon waktu rata-rata 2 detik antara saat penekanan tombol saklar ON/

APA, Harvard, Vancouver, ISO, and other styles

Kang, Jun-Kyu, Jun-Hyeok Heo, Su-Hwan Kim, and Jin Hur. "Novel Structure of Shield Ring to Reduce Shaft Voltage and Improve Cooling Performance of Interior Permanent Magnet Synchronous Motor." Electronics 13, no. 8 (2024): 1535. http://dx.doi.org/10.3390/electronics13081535.

Full text

Abstract:

The voltage of the battery system is increased to increase the efficiency of the electric motor drive system. Additionally, the space vector pulse width modulation (SVPWM) technique is used to ensure high controllability. However, high-voltage and high-speed PWM switching controls for system efficiency generate high common mode voltage (CMV), and shaft voltage is induced in the bearing. This results in a shortened bearing life and potential damage. Therefore, this paper proposes a method to reduce the shaft voltage of the motor through a novel hybrid shield ring structure. It also analyzes how

APA, Harvard, Vancouver, ISO, and other styles

STARCZEWSKI, Lech. "Research on composite shields to protect vehicle crew from the effects of gunfire." Inżynieria Bezpieczeństwa Obiektów Antropogenicznych, no. 1 (March 31, 2025): 57–66. https://doi.org/10.37105/iboa.253.

Full text

Abstract:

The article deals with the problem of selection of materials for two-component armored shields of motor vehicles. It is indicated how the Florence model can be used for practical purposes in the design process of the vehicle protective system and reduce the number of material combinations in ballistic verification tests. The procedure in configuring the shield for the assumed “a priori” protective and mass properties relevant to vehicle mobility is discussed. The method of configuring the above-mentioned materials is presented on the example of two-component shields in the combination of ceram

APA, Harvard, Vancouver, ISO, and other styles

Zhou, Peng, Pengcheng Sun, and Xin Liang. "Simulation of multi-motor synchronous control for shield main drive based on modelica." Journal of Physics: Conference Series 3009, no. 1 (2025): 012090. https://doi.org/10.1088/1742-6596/3009/1/012090.

Full text

Abstract:

Abstract The main drive system of a shield tunneling machine is typically powered by multiple motors working in unison. Any desynchronization among these motors can lead to significant damage to the entire transmission system. The complexity of synchronization control structures necessitates an advanced approach. Under the premise of a circular coupling control strategy, this study combines fuzzy control with PID control to design a fuzzy adaptive PID control algorithm. This algorithm is integrated with the multi-motor circular coupling control strategy and modeled by using Modelica, a multi-d

APA, Harvard, Vancouver, ISO, and other styles

POPA, Luminita, and Vasile POPA. "CAD - CAM PROCEDURES USED FOR RAPID PROTOTYPING OF AN ELECTRIC MOTOR DRIVING SHIELD." SCIENTIFIC RESEARCH AND EDUCATION IN THE AIR FORCE 18, no. 1 (2016): 353–60. http://dx.doi.org/10.19062/2247-3173.2016.18.1.48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Motor shield"

Lee, Chien Jung, and 李健榮. "Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/85693212161413516081.

Full text

Abstract:

碩士<br>國立屏東科技大學<br>機械工程系所<br>97<br>Abstract Student ID: M9632004 Title of Thesis:Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors. Total Pages:96 Name of Institute: National Pingtung University of Science and Technology Name of Department: Department of Mechanical Engineering Date of Graduation: July, 2009 Degree Conferred: Master Name of Student: Chien Jung Lee Adviser: Yi-Hong Lin The Contents of Abstract in this Thesis: The object of this thesis is to design and manufacture the checking gauge of automobile parts manufac

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Motor shield"

Ricketts, Mónica. Introduction. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190494889.003.0001.

Full text

Abstract:

After stabbing Princess Micomicona’s giant enemy, Don Quijote fell asleep in the shabby room of a venta (inn), while the owner, his family, and the barber were listening to the priest read a novel aloud. The old knight came back for supper all dressed up with his armor, helmet, shield, and sword. A Moor woman and a former captive, who had just arrived, joined the group. They were all happily chatting when Don Quijote stopped eating and began a ...

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Motor shield"

Sun, Jianzhong, Ran Liu, Yaqin Luo, and Wei Sun. "Research on Multi-motor Synchronization Control for Cutter Head of Shield Machine Based on the Ring Coupled Control Strategy." In Intelligent Robotics and Applications. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10817-4_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Yang, Lei, Lina Wang, Shuyin Han, et al. "Comparative Analysis of the Suppression Effect of End Shield and Slot Shield on Bearing Voltage of Variable Frequency Motors." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0451-8_128.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Liao, Yinwei, Jien Ma, Haiguang Sun, Tao Lin, and Youtong Fang. "Research on the Application of Copper Shield in Surface Mount Permanent Magnet Synchronous Motors Driven by Inverters." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1428-5_53.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Aveyard, S. C. "‘Positive direct rule’: economic policy." In No Solution. Manchester University Press, 2016. http://dx.doi.org/10.7228/manchester/9780719096402.003.0009.

Full text

Abstract:

This chapter looks at economic policy in Northern Ireland in the context of severe economic difficulties experienced by the UK as a whole. It shows how the Labour government sought to shield Northern Ireland from economic realities because of the conflict, increasing public expenditure and desperately seeking industrial investment. The level of desperation in this endeavour is illustrated through examples such as Harland & Wolff’s shipyards and the DeLorean Motor Company. The experience of the 1970s, and particularly under the Labour government, set the pattern for the following decades with a steadily increasing subvention from the rest of the United Kingdom and a growing dependence on the public sector, all at a time when the opposite trend took place in Great Britain.

APA, Harvard, Vancouver, ISO, and other styles

M H, Nishchitha, Attel Manjunath, Manjunatha K N, Adharsh Tiwari, Adhitya N. Jadhav, and Nuthan Nag. "DESIGN AND FUNCTIONAL VALIDATION OF SEMI-AUTOMATED WATER SKIMMER FOR SURFACE DEBRIS." In Futuristic Trends in Mechanical Engineering Volume 3 Book 5. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bdme5p1ch9.

Full text

Abstract:

The work is focused to develop and evaluate the functional correctness of remote controlled water trash collector. A water skimmer is a semi-autonomous device that will float across the water surface of any water body and collect the garbage and the debris floating on the surface. A robot is developed for clearing debris from the water's surface. Arover in construction that can offer great stability, and good maneuverability, and readily collect all the trash floating on the water bodies. A motor-driven collecting-arm system is developed to remove and collect surface debris, collecting the waste and redeploying it into a rectangular basket on the hull through a conveyor belt. Large volumes of debris may be accommodated inside this design, and it makes waste collection efficient in a compact area. Styrofoam will be used to create the hulls for the prototype, which will then be covered in waterproof epoxy and wrapped in fiber. The system's overall weight will be supported by strong, light aluminum framework. The robot’s propulsion system, which will be based on a differential drive mechanism and delivers tremendous thrust and 360o turning capability. Inside the hull, electronic circuits and motors are installed to shield them from the water. Gathered trash can be measured through FSR sensor and the data is updated in the website as database management. This system is cost-effective, robust, and durable. The system is also extended to manage the database for collected waste.

APA, Harvard, Vancouver, ISO, and other styles

Shiels, Stan. "Motor trip! predicting the unforeseen disaster." In Stan Shiels on Centrifugal Pumps. Elsevier, 2004. http://dx.doi.org/10.1016/b978-185617445-9/50016-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Scott, Jonathan. "A Geography Of Invention, 1500–1600." In How the Old World Ended. Yale University Press, 2020. http://dx.doi.org/10.12987/yale/9780300243598.003.0004.

Full text

Abstract:

This chapter describes the European political geography of invention, upon which the Anglo-Dutch-American process would draw. Much of the technology underpinning the rise of early modern Europe, including printing, navigation, and gunpowder, developed in China first. Yet in China, long-range voyaging was suppressed, as was printing in Constantinople. These were successful political attempts to control the movement of people and of ideas. In Europe, there was no central power capable of exercising such control, even had the will existed to do so. On the contrary, despite strenuous attempts to shield valuable information from rivals, in Europe new developments and discoveries tended to unleash a field of competitive response. As a result, the early modern acquisition of global empire was the work of many powers, rather than one. Political and (from 1517) religious competition were primary motors of the process, driving it faster and further than would otherwise have been the case.

APA, Harvard, Vancouver, ISO, and other styles

Rajaguru D., Puviyarasi T., and Vengattaraman T. "Malicious Data Stream Identification to Improve the Resource Elasticity of Handheld Edge Computing System." In Securing the Internet of Things. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9866-4.ch076.

Full text

Abstract:

This article lights the need for the identification of resource elasticity in handheld edge computing systems and its related issues. Under a few developing application situations, for example, in urban areas, operational checking of huge foundations, wearable help, and the Internet of Things, nonstop information streams must be prepared under short postponements. A few arrangements, including various programming motors, have been created for handling unbounded information streams in an adaptive and productive way. As of late, designs have been proposed to utilize edge processing for information stream handling. This article reviews the cutting-edge stream preparing motors and systems for misusing asset versatility which highlights distributed computing in stream preparation. Asset flexibility takes into consideration an application or administration to scale out/in as per fluctuating requests. Flexibility turns out to be much more difficult in conveyed conditions involving edge and distributed computing assets. Device security is one of the real difficulties for fruitful execution of the Internet of Things and fog figuring conditions in the current IT space. Specialists and information technology (IT) associations have investigated numerous answers for shield frameworks from unauthenticated device assaults. Fog registering utilizes organize devices (e.g. switch, switch and center) for dormancy mindful handling of gathered information utilizing IoT. This article concludes with the various process for improvising the resource elasticity of handheld devices for leading the communication to the next stage of computing.

APA, Harvard, Vancouver, ISO, and other styles

Wąsik Mateusz and Skarka Wojciech. "Simulation of Crash Tests for Electrically Propelled Flying Exploratory Autonomous Robot." In Advances in Transdisciplinary Engineering. IOS Press, 2016. https://doi.org/10.3233/978-1-61499-703-0-937.

Full text

Abstract:

The need for continuous technical development brings fresh innovatory solutions and at the same time indicates new trends. For years, common applied solutions have not been adequate enough to the newly established and evolving needs. Furthermore, the global development brings new challenges and needs for the aviation propulsions. An example of such a problem can be particularly noticeable in recent years, with the growing popularity of remotely controlled, small flying objects, commonly called drones, which designated new opportunities in the field of aviation, as well as become a source of new needs. An unusual challenge is the application of a drone in extremely difficult weather conditions or surrounding conditions causing its multiple and relatively strong bounce off the obstacles that may occur while using the drone to inspect ventilation ducts, in confined areas with a large number of installations, in dense forest conditions or in space with strong turbulent atmospheric conditions. In such cases it is not possible to avoid multiple collisions with various obstacles. It is necessary to design drone and its drive so that such collisions will not damage the flying object and moreover that maintenance of the full control of the drone will be possible. As the answer to those needs a drone was designed with a passive protection system. To protect against the collision consequences, the static parts of the drone&mdash;the power supply, controllers, motors and extension devices as well as the rotating parts&mdash;propellers are covered outwardly with a protection shield. In this paper the behaviour of the protection system of flying autonomous robot's propulsion during collision with perfectly rigid obstacle was checked. The performed numerical crash analysis simulates probable collision situations in operating conditions specific for the researched drone.

APA, Harvard, Vancouver, ISO, and other styles

Goldstein, Inge F., and Martin Goldstein. "Asthma, Allergy, and Air Pollution." In How Much Risk? Oxford University Press, 2002. http://dx.doi.org/10.1093/oso/9780195139945.003.0014.

Full text

Abstract:

One night in early October 1997, Felipe G., a nine-year-old child of Dominican immigrants to New York City living in East Harlem, woke up struggling for breath. Felipe had had asthma attacks before, and his parents knew, or thought they knew, what to do: they called for an ambulance, which rushed him to the emergency room of Harlem Hospital nearby. But this time he stopped breathing on the way to the hospital, and could not be revived there. His younger sister Ana also has asthma, but so far has never had to go to the emergency room. The tenement building in which Felipe’s family lives is three blocks from the Harlem River Drive, a highway on which thousands of cars travel each workday, emitting, in spite of their catalytic converters, large quantities of oxides of nitrogen, carbon monoxide, and incompletely combusted gasoline. Several blocks north is a parking garage for the diesel trucks of the New York City Department of Sanitation. The drivers of the trucks that use the lot often keep their motors idling, so that great quantities of diesel exhaust particles are emitted to the surrounding area. The Harlem district of New York City, inhabited mainly by African-Americans and Hispanics, is shielded to a large extent from the prevailing west winds by higher areas on the west side of Manhattan. Hence, air pollution produced within Harlem—for example, by cars, diesel trucks, and buses, and by an electric power generating plant located there—tends to remain longer than in other areas of the city. The New York City Department of Environmental Protection operated a network of air monitoring stations from the 1940s to the 1970s, during which time Harlem was consistently found to be the most polluted area in the city. It had then, and still has, one of the highest rates of hospitalization for asthma in the city. In most countries, asthma is more common among children of higher social class. In the United States this pattern is reversed: people living in the inner cities of the United States, mostly low-income minorities, have higher rates of asthma than other Americans.

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Motor shield"

Heo, Jun-Hyeok, Jun-Kyu Kang, Jun-Hyuk Im, and Jin Hur. "Shaft Voltage Reduction Technique by Layered-Shield of Wound Field Synchronous Motor." In 2024 27th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2024. https://doi.org/10.23919/icems60997.2024.10921386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kogelis, Madeline, Zachary J. Fuge, Connor W. Herron, Bhaben Kalita, and Alexander Leonessa. "Design of Low-Level Hardware for a Multi-Layered Control Architecture." In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-94614.

Full text

Abstract:

Abstract In this work, the low-level (LL) hardware for sensor collection, motor input, and networking with a high-level (HL) controller is presented for robot systems which utilize linear series elastic actuators (LSEAs) for joint actuation. In multi-joint robotic systems, LL controllers rely on sensor readings to control each joint and communicate the obtained information to the HL controller. This research outlines the hardware design of two printed circuit boards (PCBs), as well as the use of an EasyCAT PRO board for communication. An in-house sensor interface shield is designed as an exten

APA, Harvard, Vancouver, ISO, and other styles

Ferkova, Zelmira, and Peter Bober. "Magnetic shield optimization for the multi-motor assembly." In 2017 International Symposium on Electrical Machines (SME). IEEE, 2017. http://dx.doi.org/10.1109/isem.2017.7993549.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Tadayon, M. A., S. S. Ziaee Tabatabaie, and A. A. Eftekharian. "Vibroacoustic Analysis of the Switch Reluctance Motor." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41968.

Full text

Abstract:

One of the most important types of electromechanical systems is the Switch Reluctance Motors/Machines (SRM) which is attracting considerable interest in industry. In SRM generally there are a lot of disorders and noises due to big vibratory radial loads, such as acoustic noises. In order to prevent these disturbances and decrease environmental noise pollutions, it is very necessary to study them carefully. To reach this purpose in this work first, radial loads of the SRM are investigated and then modal analysis is performed to obtain natural frequencies and mode shapes of the whole system. Aft

APA, Harvard, Vancouver, ISO, and other styles

Suwatthikul, Jittiwut, and Sunisa Sornmuang. "Fault detection and diagnosis of a motor bearing shield." In 2011 IEEE 6th International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS). IEEE, 2011. http://dx.doi.org/10.1109/idaacs.2011.6072768.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Hu, Henry, Albert E. Patterson, Muhammad Faeyz Karim, Logan Porter, and Pavan V. Kolluru. "Evaluation of Additively Manufactured Thermoplastic Composite Magnetic Field Shielding for Stepper Motors." In WCX SAE World Congress Experience. SAE International, 2025. https://doi.org/10.4271/2025-01-8201.

Full text

Abstract:

<div class="section abstract"><div class="htmlview paragraph">As stepper motors become more and more widely used in engineering systems (vehicles, 3-D printers, manufacturing tools, and similar), the effects of their induced magnetic fields present a concern during the packing and orientation of components within the system. For applications requiring security, this is also a concern as the background electromagnetic radiation (EMF) can be captured at a distance and used to reproduce the motion of the motor during operation. One proposed alternative is to use customized non-magneti

APA, Harvard, Vancouver, ISO, and other styles

Bento, Antonio Carlos, Leonardo Augusto Taniguti Mantovani, Norberto Santos, and Sergio Joao Guimaraes Da Silva. "A Data Transmission Survey with NodeMCU12e with Motor Shield and Nextion + NRF24L01." In 2019 10th International Conference on Computing, Communication and Networking Technologies (ICCCNT). IEEE, 2019. http://dx.doi.org/10.1109/icccnt45670.2019.8944865.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Wijaya, Wisnu, Ferdian Syahroni, Cecep Deni Mulyadi, Winardi Sani, Asep Lukman, and Hardy Pumama Nurba. "Two Axis Simple CNC Machines Based on Microcontroller and Motor Driver Shield IC L293D." In 2020 14th International Conference on Telecommunication Systems, Services, and Applications (TSSA). IEEE, 2020. http://dx.doi.org/10.1109/tssa51342.2020.9310882.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Full text

APA, Harvard, Vancouver, ISO, and other styles

Zhang, Xiaolong, Junhui Zhang, Bing Xu, Zhixian Yang, Qi Zhao, and Hongjuan Zhang. "The Effect of Slotted Hole on Minimum Oil Film Thickness of Piston in Radial Piston Hydraulic Motor." In ASME/BATH 2021 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/fpmc2021-69937.

Full text

Abstract:

Abstract The cam-lobe radial-piston hydraulic motor, a multistroke low-speed high-torque motor, is widely used in large rotating machines such as winches, shield machines, and shredders, etc. There is a slotted hole on its pistons to reduce inertial force, which can simultaneously affect piston deformation. Unfortunately, piston deformation will also have an obvious impact on the oil film characteristics of the interface between pistons and cam rollers. Accordingly, in this paper, a coupled model, which combines the unsteady elastohydrodynamic lubrication model and a structural mechanics model

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!