Log in

Relevant bibliographies by topics / Motorcycle manufacturing / Journal articles

To see the other types of publications on this topic, follow the link: Motorcycle manufacturing.

Journal articles on the topic 'Motorcycle manufacturing'

Author: Grafiati

Published: 4 June 2021

Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Motorcycle manufacturing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

KISHI, Kenetsu. "METHOD OF MANUFACTURING A MOTORCYCLE RADIATOR." Journal of Advanced Science 3, no. 1 (1991): f8—f10. http://dx.doi.org/10.2978/jsas.3.f8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Patnayak, Archak, Narendra Kumar Bansal, and Jyotirmay Mathur. "Energy analysis of manufacturing process of a motorcycle." International Journal of Energy Technology and Policy 2, no. 4 (2004): 392. http://dx.doi.org/10.1504/ijetp.2004.005743.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Islahudin, Nur. "TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDAMOTOR." SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin 13, no. 1 (2019): 15. http://dx.doi.org/10.24853/sintek.13.1.15-25.

Full text

Abstract:

Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indonesia and encouraged motorcycles manufacturing industries to deliver products according to consumer needs. To be able to meet the varied needs of consumers, motorcycle manufacturers always make improvements in all of their production area. There are two main components in the motorcycle, engine and frame. These two components are produced by several parts of production based on t

APA, Harvard, Vancouver, ISO, and other styles

4

Sakamoto, Haruo. "Designing and Manufacturing of a Hand-made Electric Motorcycle." Journal of Asian Electric Vehicles 2, no. 2 (2004): 645–50. http://dx.doi.org/10.4130/jaev.2.645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sha, Ling. "The Application of Reverse Engineering in Innovation Design." Applied Mechanics and Materials 470 (December 2013): 479–83. http://dx.doi.org/10.4028/www.scientific.net/amm.470.479.

Full text

Abstract:

The concept of reverse engineering, reverse design process and reverse analysis were introduced in this paper, and has been used in teaching practice of mechanical design specialized curriculum, the students will be guided to apply method of reverse design to the innovation design of product by motorcycle as an example. Through the reverse design and analysis of motorcycle, students have a comprehensive understanding about computer integrated manufacturing system, which will cultivate technology talents who can adapt to the advanced manufacturing technology development and meet the requirement

APA, Harvard, Vancouver, ISO, and other styles

6

Faruque, Omar, and Md Motiur Rahman. "Development of Wholesale and Retail Trade, Repair of Motor Vehicles and Motorcycles Business in Rangpur Division." ABC Journal of Advanced Research 10, no. 1 (2021): 39–56. http://dx.doi.org/10.18034/abcjar.v10i1.569.

Full text

Abstract:

Bangladesh has already become a middle-income country. Yet its large number of working people is still jobless. The importance of Wholesale, Retail, Motor-vehicle workshop, and Motorcycle businesses (WRMB) for solving employment problems in a short time is immense. WRMB can pave the way for the employment of these people. There are eighteen types of manufacturing and service activity in the small-scale industry (SSI) sector. Out of this WRMB activity sector holds the height contribution in number. This paper attempts to discover the present situation of the Growth and Development of the Wholes

APA, Harvard, Vancouver, ISO, and other styles

7

Shuaeib, F. M., A. M. S. Hamouda, R. S. Radin Umar, M. M. Hamdan, and M. S. J. Hashmi. "Motorcycle helmet." Journal of Materials Processing Technology 123, no. 3 (2002): 406–21. http://dx.doi.org/10.1016/s0924-0136(02)00048-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Maleque, M. A., M. M. Rahman, and M. S. Hossain. "Reverse Engineering of Motorcycle Chain." Advanced Materials Research 264-265 (June 2011): 1678–83. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.1678.

Full text

Abstract:

Reverse engineering often involves taking something apart and analyzing its workings in detail to be used in maintenance or to try to make a new product or component that does the same thing without copying anything from the original. In order to understand the existing design, materials and manufacturing process of a motorcycle chain and also for the future direction in new materials with new design, a comprehensive study on the reverse engineering is essential. Therefore, in this paper, a systematic study on a motorcycle chain reverse engineering is performed. The two types of motorcycle cha

APA, Harvard, Vancouver, ISO, and other styles

9

Berg, F. A., P. Rücker, and J. König. "Motorcycle crash tests — an overview." International Journal of Crashworthiness 10, no. 4 (2005): 327–39. http://dx.doi.org/10.1533/ijcr.2005.0349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hamberger, Adam, Milan Daňa, and Luboš Kroft. "Construction Design and Manufacturing of a Cylinder Liner of a Motorcycle." Manufacturing Technology 19, no. 3 (2019): 380–84. http://dx.doi.org/10.21062/ujep/300.2019/a/1213-2489/mt/19/3/380.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Lerttira, Areeda, and Prasad K. D. V. Yarlagadda. "Assembly Line Balancing the Comparison of COMSOAL and MSNSH Technique in Motorcycle Manufacturing Company." Advanced Materials Research 605-607 (December 2012): 166–74. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.166.

Full text

Abstract:

Today’s highly competitive market influences the manufacturing industry to improve their production systems to become the optimal system in the shortest cycle time as possible. One of most common problems in manufacturing systems is the assembly line balancing problem. The assembly line balancing problem involves task assignments to workstations with optimum line efficiency The most common purposes of Computer Method for Sequencing Operations for Assembly Line (COMSOAL) are to minimise idle time, optimise production line efficiency, and minimise the number of workstations. Therefore, this pape

APA, Harvard, Vancouver, ISO, and other styles

12

Hamberger, Adam, and Milan Daňa. "Measuring the Performance Characteristics of a Motorcycle." Manufacturing Technology 19, no. 4 (2019): 573–78. http://dx.doi.org/10.21062/ujep/336.2019/a/1213-2489/mt/19/4/573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Clement, Tom. "Excelsior-Henderson motorcycles: Could lean start-up methodology have averted a $100-million Mistake?" International Journal of Entrepreneurship and Innovation 20, no. 2 (2018): 144–56. http://dx.doi.org/10.1177/1465750318760844.

Full text

Abstract:

This case applies the recently proposed lean start-up methodology to the failed Excelsior-Henderson Motorcycle Manufacturing Company. Company founder Dan Hanlon and his family pursued a dream to start a new American motorcycle company based largely on market leader Harley-Davidson’s inability to meet customer demand. Excelsior-Henderson’s founders followed a path of crafting and executing an elaborate business plan filled with goals and assumptions, with no customer discovery, validation, or iterative testing performed. The result was misjudging the complexities and financial demands of the mo

APA, Harvard, Vancouver, ISO, and other styles

14

Sutee, Umchid, and Prasad K. D. V. Yarlagadda. "Simulation-Based Comparison of Pull-Push Systems in Motorcycle Assembly Line." Applied Mechanics and Materials 241-244 (December 2012): 1507–13. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.1507.

Full text

Abstract:

To investigate the effects of adopting a pull system in assembly lines in contrast to a push system, simulation software called “ARENA” is used as a tool in order to present numerical results from both systems. Simulation scenarios are created to evaluate the effects of attributes changing in assembly systems, with influential factors including the change of manufacturing system (push system to pull system) and variation of demand. Moreover, pull system manufacturing consists of the addition attribute, which is the number of buffer storage. This paper will provide an analysis based on a previo

APA, Harvard, Vancouver, ISO, and other styles

15

Liu, Xin, and Wei Fan. "Research on the Data Segmentation Technique of Large Rapid Prototyping Sample Based on Features." Applied Mechanics and Materials 248 (December 2012): 551–54. http://dx.doi.org/10.4028/www.scientific.net/amm.248.551.

Full text

Abstract:

Because of the small workbench molding size of rapid prototyping equipment, the processing of large rapid prototyping samples is a problem during the new product development process, for example, motorcycle covering. The relative merits of accuracy engraving technique and rapid prototyping technique during processing are discussed. The method combining accuracy engraving machine and rapid prototyping machine to processing new motorcycle cover samples is proposed. And the surface data segmentation technique based on features is adopt to divide the large rapid prototyping sample reasonably, and

APA, Harvard, Vancouver, ISO, and other styles

16

Yankevich, Stsiapan. "Nanomaterials and additive technologies in prototyping of personal electric vehicles." Science and Innovations 1, no. 215 (2021): 34–41. http://dx.doi.org/10.29235/1818-9857-2021-1-34-41.

Full text

Abstract:

The article describes the process of creating prototypes of personal electric vehicles, in particular, an electric motorcycle and an electric scooter, carried out under the Fourth industrial revolution, characterized by the widespread introduction of additive manufacturing into production, nano -structured powder materials and completely virtual design and simulation.

APA, Harvard, Vancouver, ISO, and other styles

17

Zhao, Dong Fang, Xiao Dong Zhang, Chen Jian Gong, and Cui Cui Wang. "Human Error Simulation of Manufacturing Cell Based on Human-Machine Integrated Model." Applied Mechanics and Materials 644-650 (September 2014): 3270–74. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.3270.

Full text

Abstract:

In order to analyze human error how to have effect on manufacturing cell and improve manufacturing efficiency from operators’ point of view, manufacturing cell human error simulation model based on the principle of human-machine integrated is proposed firstly. The realized process of manufacturing cell simulation model is detailed described. After that, human behaviors in manufacturing cell were analyzed and realization mechanisms of main model were introduced. Finally, applied above model and theory in a motorcycle manufacturing cell and simulated various human errors. The simulation result s

APA, Harvard, Vancouver, ISO, and other styles

18

Kováčiková, Petra, Andrej Dubec, and Jana Kuricová. "The microstructural study of a damaged motorcycle gear wheel." Manufacturing Technology 21, no. 1 (2021): 83–90. http://dx.doi.org/10.21062/mft.2021.011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Park, Kyungsu, and Jingshan Li. "Improving productivity of a multi-product machining line at a motorcycle manufacturing plant." International Journal of Production Research 57, no. 2 (2018): 470–87. http://dx.doi.org/10.1080/00207543.2018.1448129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Qiang, Xian. "RFID-Enabled Manufacturing Executing System for Flexible Assembly Line." Advanced Materials Research 323 (August 2011): 8–12. http://dx.doi.org/10.4028/www.scientific.net/amr.323.8.

Full text

Abstract:

An increasing number of manufacturing enterprises commence to adopt flexible assembly line to meet the demands of the rapidly changing market. RFID technology is employed to collect the real-time production information in workshop and overcome difficulty to identify key production objects. In this paper, based on the RFID tag data model of smart objects, an RFID application solution on flexible assembly line is proposed, and an RFID-enabled manufacturing executing system is designed, which is integrated with the RFID-enabled real-time data capture system for flexible assembly line. In addition

APA, Harvard, Vancouver, ISO, and other styles

21

Viswanathan, Shekar. "Implementation Of Effective Capstone Projects In Undergraduate Manufacturing Design Engineering Program." American Journal of Engineering Education (AJEE) 8, no. 1 (2017): 45–60. http://dx.doi.org/10.19030/ajee.v8i1.9967.

Full text

Abstract:

Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students’ perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three specific capstone projects that were worked on in an undergraduate manufacturing design engineering program. The projects include an office chair design, development of an improved balloon marker placement system for catheter manufacturing, and a modu

APA, Harvard, Vancouver, ISO, and other styles

22

Mills, N. J. "Critical evaluation of the SHARP motorcycle helmet rating." International Journal of Crashworthiness 15, no. 3 (2010): 331–42. http://dx.doi.org/10.1080/13588260903251000.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

CHEN, BAO, JIAN OU, and YONG ZHANG. "TRANSIENT IMPACTING STRENGTH ANALYSIS OF MOTORCYCLE MODEL." Journal of Advanced Manufacturing Systems 07, no. 01 (2008): 75–79. http://dx.doi.org/10.1142/s0219686708001127.

Full text

Abstract:

Considering the disadvantages of analysis method singleness and result differentia in the conventional structural strength analysis of motorcycle, a method concerning transient impacting strength analysis was proposed, which is based on the finite element theory. Then the bearing capacity theory was researched, and three typical operating modes under the acting of transient impacting were confirmed. Under the circumstance of MSC.PATRAN/NASTRAN software, by applying the composite structure of rod, plate and shell which has a high calculation accuracy, the element subdivision of frame is done. T

APA, Harvard, Vancouver, ISO, and other styles

24

Biju, Abhinav. "Design and Analysis of Motor Cycle Helmet for Improved Safety." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (2021): 75–85. http://dx.doi.org/10.22214/ijraset.2021.36188.

Full text

Abstract:

Road accidents are one of the most common and unavoidable problems in our society which costs our precious lives. Helmets of poor quality only give the lack of security, so helmets with more improvised design become the priority for two-wheelers. Our paper aims to design and prototype safety helmets for motorcycles with innovative design, which facilitates the user to wear it more comfortably. In addition to that, we analyze the improved design and optimize it. As safety is the primary criterion for the customers, we aim to produce the helmets by additive manufacturing with a customized design

APA, Harvard, Vancouver, ISO, and other styles

25

Grącki, Grzegorz, Krzysztof Gębarski, and Hubert Kubik. "The application of a SMARTTECH 3D scanner for the production of additional parts / industry: motorcycle accessories." Advanced Technologies in Mechanics 2, no. 4(5) (2016): 33. http://dx.doi.org/10.17814/atim.2015.4(5).31.

Full text

Abstract:

Enduro-Tech is the best known suppliers of parts in the off-road racing motorcycle industry. The company uses 3D printing technology based on melting stainless steel powder in order to design dedicated, additional or replacement parts. Application of the 3D digitization of an object has enabled optimization and accelerated the process of creating prototypes. The article presents an example process of design and manufacturing of dedicated engine casing.

APA, Harvard, Vancouver, ISO, and other styles

26

Colina, Eliezer, Mario Peña, Villie Morocho, and Lorena Siguenza-Guzman. "Mathematical modeling to standardize times in assembly processes: Application to four case studies." Journal of Industrial Engineering and Management 14, no. 2 (2021): 294. http://dx.doi.org/10.3926/jiem.3192.

Full text

Abstract:

Purpose: This paper proposes model-based standard times estimates, using multiple linear regression, nonlinear optimization, and fuzzy systems in four real cases assembly lines. The work includes a description of the models and a comparison of their performance with values obtained using the conventional chronometer method. These models allow estimating standard times without reconducting field studies.Design/methodology/approach: For the development of the time study, the methodology applied by the International Labour Organization (ILO) was used as a baseline. This methodology is structured

APA, Harvard, Vancouver, ISO, and other styles

27

Kosmač, Tomaž, Aleš Dakskobler, Mihael Kermc, and Zmago Stadler. "Ceramic Piston for Hydraulic Brakes: Design Study." Advances in Science and Technology 45 (October 2006): 1771–75. http://dx.doi.org/10.4028/www.scientific.net/ast.45.1771.

Full text

Abstract:

A design study for ceramic pistons was undertaken in order to address the overheating problems associated with the caliper during aggressive braking using modern C/C-SiC brake discs. The reasoning behind the piston design and the choice of the shaping technology are explained. Zirconia-toughened mullite (ZTM) ceramic was chosen for the pistons, because this material exhibits a low thermal conductivity, sufficiently high mechanical strength and fracture toughness, as well as very good thermal-shock resistance. The manufacturing technology of experimental ceramic brake pistons involved compoundi

APA, Harvard, Vancouver, ISO, and other styles

28

Ashmore, C. "Kaizen ... and the art of motorcycle manufacture." Manufacturing Engineer 80, no. 5 (2001): 220–22. http://dx.doi.org/10.1049/me:20010504.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Segla, Stefan, and Sayantan Roy. "Dynamic Simulation Analysis of a Motorcycle Suspension System - Assessment of Comfort." Manufacturing Technology 20, no. 3 (2020): 373–77. http://dx.doi.org/10.21062/mft.2020.052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Tung, S. H., S. V. Wong, T. H. Law, and R. S. Radin Umar. "Crashes with roadside objects along motorcycle lanes in Malaysia." International Journal of Crashworthiness 13, no. 2 (2008): 205–10. http://dx.doi.org/10.1080/13588260701788534.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Wahab, Lukuman, and Haobin Jiang. "Severity prediction of motorcycle crashes with machine learning methods." International Journal of Crashworthiness 25, no. 5 (2019): 485–92. http://dx.doi.org/10.1080/13588265.2019.1616885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Liu, Xin, Hai Qing Du, and Wei Dong Wang. "Application of Accuracy Engraving Technique in the Motorcycle New Product Development." Advanced Materials Research 230-232 (May 2011): 444–47. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.444.

Full text

Abstract:

The relative merits of accuracy engraving technique and rapid prototyping technique during processing are discussed. Because the product dimensions are small and the strength of the rapid prototyping sample workpiece in vertical direction is too small to meet the engineering design requirements, the method using accuracy engraving machine to replace rapid prototyping machine to design product with large size and need to assemble like motorcycle cover is proposed. If the product size is too large, it can be split and every part is carved with the accuracy engraving machine, and then they are st

APA, Harvard, Vancouver, ISO, and other styles

33

Gunpinar, Erkan, Masaki Moriguchi, Hiromasa Suzuki, and Yutaka Ohtake. "Feature-aware partitions from the motorcycle graph." Computer-Aided Design 47 (February 2014): 85–95. http://dx.doi.org/10.1016/j.cad.2013.09.003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Yunan, Agustinus, Dimas Raya, and Rifda Ilahy Rosihan. "Analisis Upaya Menurunkan Cacat Produk Crank Case LH pada Proses Die Casting dengan Metode PDCA dan FMEA di PT. Suzuki Indo Mobil/Motor." Journal of Industrial and Engineering System 1, no. 1 (2020): 1–10. http://dx.doi.org/10.31599/jies.v1i1.160.

Full text

Abstract:

 Suzuki Indo Mobil / Motorcycle is the largest motorcycle manufacturing industry in Indonesia today. Die Casting is one of the departments that is important in the manufacture of motorcycle parts. In the Die Cating section, there are a number of types of defects that exceed the company tolerance standards. During the February to July period, 228 pcs of defect products were found. For this reason, it is necessary to determine the most dominant factor in the occurrence of defects and determine the proposed improvement of the root problem. PDCA is a useful tool for continuous improvement an

APA, Harvard, Vancouver, ISO, and other styles

35

Gao, Yong Xiang. "Modeling and Numerical Control Machining of the Mould of a Rearview Mirror of a Motorcycle Based on the Reverse Engineering Technology." Applied Mechanics and Materials 215-216 (November 2012): 664–68. http://dx.doi.org/10.4028/www.scientific.net/amm.215-216.664.

Full text

Abstract:

The Reverse Engineering Technology (RET) is extensively employed in the realm of product designing. In this paper, a Three-coordinate Measuring Machine is utilized first to measure the data points of the rearview mirror of a motorcycle, then under UG modeling environment, surface reconstruction is conducted, and lastly procedures like mold splitting and mold core machining are finished upon exercising the Moldwizard Module of UG software. In short, the application of the RET greatly shortened the period of product designing and manufacturing.

APA, Harvard, Vancouver, ISO, and other styles

36

Kalincová, Daniela, Miroslava Ťavodová, and Sylvia Kuśmierczak. "Analysis of the Properties Aluminium Casting Motorcycle Forks Arm after Compression Test." Manufacturing Technology 17, no. 5 (2017): 717–22. http://dx.doi.org/10.21062/ujep/x.2017/a/1213-2489/mt/17/5/717.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Chawla, A., S. Mukherjee, D. Mohan, et al. "FE simulations of motorcycle—car frontal crashes, validations and observations." International Journal of Crashworthiness 10, no. 4 (2005): 319–26. http://dx.doi.org/10.1533/ijcr.2005.0344.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Polanía-Restrepo, Simón, Santiago Jaramillo-González, and Gilberto Osorio-Gómez. "Electric hybridization kit for modification of a manual transmission motorcycle." International Journal on Interactive Design and Manufacturing (IJIDeM) 14, no. 2 (2020): 587–94. http://dx.doi.org/10.1007/s12008-020-00649-w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Olyvia Doaly, Carla, Iphov K. Sriwana, Lithrone Salomon, and Farrell. "Analysis the measurement quality system of clearence tappet using measurement system analysis on motorcycle manufacturing company." IOP Conference Series: Materials Science and Engineering 852 (July 21, 2020): 012124. http://dx.doi.org/10.1088/1757-899x/852/1/012124.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Cortés, Pablo, Luis Onieva, and José Guadix. "Optimising and simulating the assembly line balancing problem in a motorcycle manufacturing company: a case study." International Journal of Production Research 48, no. 12 (2009): 3637–56. http://dx.doi.org/10.1080/00207540902926522.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Carfagni, Monica, Lapo Governi, and Yary Volpe. "Comfort assessment of motorcycle saddles: a methodology based on virtual prototypes." International Journal on Interactive Design and Manufacturing (IJIDeM) 1, no. 3 (2007): 155–67. http://dx.doi.org/10.1007/s12008-007-0018-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Ricci, Stefano, Marco Troncossi, and Alessandro Rivola. "Model Reduction of the Flexible Rotating Crankshaft of a Motorcycle Engine Cranktrain." International Journal of Rotating Machinery 2011 (2011): 1–9. http://dx.doi.org/10.1155/2011/143523.

Full text

Abstract:

This paper addresses the development of an elastodynamic model of a motorcycle engine cranktrain aimed at accurately evaluating the interactions between the crankshaft and the engine block, thus allowing an improved structural design. A rigid multibody model is first implemented and simulated; only kinematic joints are involved at this stage, leading to a statically determinate assembly of the mechanism. Such a modelling approach prevents the loads at certain interface locations to be evaluated; furthermore, high-frequency dynamic effects cannot be predicted. These drawbacks can be removed by

APA, Harvard, Vancouver, ISO, and other styles

43

Gunpinar, Erkan, Masaki Moriguchi, Hiromasa Suzuki, and Yutaka Ohtake. "Motorcycle graph enumeration from quadrilateral meshes for reverse engineering." Computer-Aided Design 55 (October 2014): 64–80. http://dx.doi.org/10.1016/j.cad.2014.05.007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Chiarini, Andrea. "Sustainable manufacturing-greening processes using specific Lean Production tools: an empirical observation from European motorcycle component manufacturers." Journal of Cleaner Production 85 (December 2014): 226–33. http://dx.doi.org/10.1016/j.jclepro.2014.07.080.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Hou, Kaihong, Banglin Deng, Yangyang Chen, Jiaqi Ran, and Jianqin Fu. "For cleaner exhaust of a high performance motorcycle: A macroscopic comparative study of catalytic converters under world-wide motorcycle test cycle." Journal of Cleaner Production 284 (February 2021): 124730. http://dx.doi.org/10.1016/j.jclepro.2020.124730.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Piantini, Simone, Nicolas Bourdet, Giovanni Savino, et al. "Potential head injury mitigation of M-AEB in real-world motorcycle crashes." International Journal of Crashworthiness 25, no. 6 (2019): 591–602. http://dx.doi.org/10.1080/13588265.2019.1626531.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Polanía-Restrepo, Simón, Santiago Jaramillo-González, and Gilberto Osorio-Gómez. "Correction to: Electric hybridization kit for modification of a manual transmission motorcycle." International Journal on Interactive Design and Manufacturing (IJIDeM) 14, no. 2 (2020): 737. http://dx.doi.org/10.1007/s12008-020-00658-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Gong, Zhong Wei, Hai Cheng Yang, Rong Mo, and Tao Chen. "Analysis of Engineering Change Based on Product Development Network." Advanced Materials Research 314-316 (August 2011): 1607–11. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1607.

Full text

Abstract:

Engineering change is an important and complex activity for manufacturing enterprises. In order to improve the efficiency of engineering change, designers should pay different attentions to different nodes of product development network. In that case, a method of classifying the nodes was proposed. First, we proposed a method to cluster the nodes based on design structure matrix; then, we analyzed the indexes for evaluating the importance of nodes and studied the method of classifying the nodes of product development network; finally, the experiment of managing a type of motorcycle engine was

APA, Harvard, Vancouver, ISO, and other styles

49

Yin, Sheng, Zhen Ya Yang, and Ming Yang. "Networked Production Management System for Outsourcing Based on Virtual Workshop Section." Applied Mechanics and Materials 536-537 (April 2014): 632–36. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.632.

Full text

Abstract:

Aiming at the problems including the weakness of coordination and controllability in the process of outsourcing between small and medium-sized manufacturing enterprises, a conception of virtual workshop section (VWS) is put forward, the chief objectives of which are effectively control and optimize the allocation of resources, and a networked outsourcing management mode is established based on the VWS. According to this mode, a networked production management system for outsourcing (NPMSO) is put forward and the architecture, the running process included in the system are analyzed. At last, Th

APA, Harvard, Vancouver, ISO, and other styles

50

Jonny, Jonny. "Analisis Incremental Kelayakan Penambahan Lini Perakitan Engine Motor Pt Abc." ComTech: Computer, Mathematics and Engineering Applications 4, no. 1 (2013): 537. http://dx.doi.org/10.21512/comtech.v4i1.2800.

Full text

Abstract:

Manufacturing motorcycle unit in Plant 1 of PT ABC requires engine supply from Plant 2. This has some burden on the operating cost of Plant 1 and the opportunity loss as well due to delay of motor engine delivery. Based on the problem, team proposes additional engine line in Plant 1 to cut engine supply from Plant 2. Therefore, team analyzes this proposal using incremental analysis to determine whether the proposal is feasible or not by comparing before and after condition with result NPV about IDR 967 Billion and Payback Period under 1 year. By this result, team determines that this proposal

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!