Log in

Relevant bibliographies by topics / Mould Properties and Yola natural sand

Contents

Journal articles

Academic literature on the topic 'Mould Properties and Yola natural sand'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mould Properties and Yola natural sand.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mould Properties and Yola natural sand"

1

Ihom, A.P, E.E Anbua, A. Bam, and E. Onche. "EFFECTS OF RAMMING ON THE MOULD PROPERTIES OF YOLA NATURAL SAND." Continental J. Engineering Sciences 4 (July 22, 2009): 20–25. https://doi.org/10.5281/zenodo.833695.

Full text

Abstract:

The paper has investigated the effects of ramming on the mould properties of Yola natural sand. The work considered the variation of the number of rams with green compression strength, dry compression strength, green permeability and bulk density. The results showed that as the number of rams increase, the green compression also increases attaining the highest strength of 186.17kPa as the number of rams reached 6 rams. The dry compression strength also increased with the number of rams. The green permeability however started increasing but dropped after the fourth blow. This drop is normal; af

APA, Harvard, Vancouver, ISO, and other styles

2

Stephen, Joseph Temitope, Adeyinka Adebayo, and Gbenga Joshua Adeyemi. "Influence of Solidification Rates and Stress-Relief Annealing on the Mechanical Properties of Cast 6063 Aluminium Alloy." European Journal of Engineering Research and Science 3, no. 5 (2018): 71. http://dx.doi.org/10.24018/ejers.2018.3.5.750.

Full text

Abstract:

This paper reports the influence of solidification rate and stress-relief annealing on the mechanical properties of cast 6063 Aluminium alloy (Al6063). Ingots of Al6063 were melted and then cast using sand and metal moulds. Some of the cast samples were heat treated and then cooled in natural air. Tensile test, hardness test, impact test and microstructural analysis were carried out on the samples. The results show substantial changes in the mechanical properties of the specimens. The ultimate tensile strength, yield strength and hardness percentage elongation of cast Al6063 increases with the

APA, Harvard, Vancouver, ISO, and other styles

3

Stephen, Joseph Temitope, Adeyinka Adebayo, and Gbenga Joshua Adeyemi. "Influence of Solidification Rates and Stress-Relief Annealing on the Mechanical Properties of Cast 6063 Aluminium Alloy." European Journal of Engineering and Technology Research 3, no. 5 (2018): 71–76. http://dx.doi.org/10.24018/ejeng.2018.3.5.750.

Full text

Abstract:

This paper reports the influence of solidification rate and stress-relief annealing on the mechanical properties of cast 6063 Aluminium alloy (Al6063). Ingots of Al6063 were melted and then cast using sand and metal moulds. Some of the cast samples were heat treated and then cooled in natural air. Tensile test, hardness test, impact test and microstructural analysis were carried out on the samples. The results show substantial changes in the mechanical properties of the specimens. The ultimate tensile strength, yield strength and hardness percentage elongation of cast Al6063 increases with the

APA, Harvard, Vancouver, ISO, and other styles

4

Kumar, Sanjeev, Anil Kumar Sahu, and Sanjeev Naval. "Study on the Swelling Behavior of Clayey Soil Blended with Geocell and Jute Fibre." Civil Engineering Journal 7, no. 8 (2021): 1327–40. http://dx.doi.org/10.28991/cej-2021-03091728.

Full text

Abstract:

Expansive soils like clays undergo swelling that can both be detrimental and acceptable in different applications. In the Northern part of India, especially Delhi region, natural soils containing clays & clayey sands support most of the buildings. Mechanically stabilized clays mixed with sand are used for local earthwork construction such as roads and landfills. Exact understanding of the swelling behaviour of such soils is a pre-requisite before the start of any construction projects. In this paper the swelling behaviour of clayey soil reinforced with geocell & Jute fibres has been pr

APA, Harvard, Vancouver, ISO, and other styles

5

Murali, Gunasekaran, Sallal R. Abid, Mugahed Amran, Roman Fediuk, Nikolai Vatin, and Maria Karelina. "Combined Effect of Multi-Walled Carbon Nanotubes, Steel Fibre and Glass Fibre Mesh on Novel Two-Stage Expanded Clay Aggregate Concrete against Impact Loading." Crystals 11, no. 7 (2021): 720. http://dx.doi.org/10.3390/cryst11070720.

Full text

Abstract:

The use of expanded clay aggregate (ECA) for developing lightweight concrete results in strength-reduction properties. However, the ECA-based concrete strength properties can be improved by adding steel fibre (SF), glass fibre mesh (GFM) and multi-walled nano-carbon tubes (MWCNT). The combined effect of MWCNT, GFM, SF and ECA-based concrete and its strength properties is still unexplored. It is worth drawing a logical conclusion concerning the impact on the strength of concrete by incorporating the materials mentioned above. Two-stage expanded clay aggregate fibrous concrete (TECAFC) is a new

APA, Harvard, Vancouver, ISO, and other styles

6

Atul, Mohd, and Sourabh Lalotra. "A Study on Cement Partially Replaced with Chalk Powder and Coconut Fiber Ash with the Addition of Asbestos Fiber." International Journal for Research in Applied Science and Engineering Technology 11, no. 6 (2023): 1398–407. http://dx.doi.org/10.22214/ijraset.2023.53860.

Full text

Abstract:

Abstract: Concrete can be defined as a building material that can be composed by mixing gravel or broken stone, sand, cement, and water. The mixture can be poured into any shape, size of mould, which on hardening gives a solid stone like mass, the strength of hardened solid mass can be increased by adding admixtures. The main aim of the admixtures is to enhance the properties to some extend of the desired solid mass. In common man language concrete can be defined as mixture of paste and aggregates. The partial replacement of aggregates is need for the future generation of concrete structures f

APA, Harvard, Vancouver, ISO, and other styles

7

Kubecki, M., M. Holtzer, A. Bobrowski, R. Dańko, B. Grabowska, and S. Żymankowska-Kumon. "Analysis of the Compounds from the BTEX Group, Emitted During Thermal Decomposition of Alkyd Resin." Archives of Foundry Engineering 12, no. 3 (2012): 69–74. http://dx.doi.org/10.2478/v10266-012-0084-z.

Full text

Abstract:

Abstract Suitability of the given binding agent for the moulding sands preparation depends on the one hand on the estimation of technological properties of the sand and the mould made of it and the obtained casting quality and on the other hand on the assessment of this sand influence on the natural and working environment. Out of moulding sands used in the foundry industry, sands with organic binders deserve a special attention. These binders are based on synthetic resins, which ensure obtaining the proper technological properties and sound castings, however, they negatively influence the env

APA, Harvard, Vancouver, ISO, and other styles

8

"Effective Utilization of Industrial and Constructional Solid Waste Materials in Foundry Mould Making to Prevent Environment Pollution and Conserve Natural Silica Sand." Global NEST: the international Journal, August 13, 2023. http://dx.doi.org/10.30955/gnj.005045.

Full text

Abstract:

<p>Green sand moulding uses silica sand for metal casting. Silica sand mining and delivery to foundries destroy the ecosystem, making metal casting unsustainable. Due to increased sand-casting output and massive civil buildings in India, the silica sand supply is declining. The depletion and shortage of silica sand necessitate the search for viable replacements. Industrial solid waste from large-scale industrialization pollutes land, air, and water. In order to use industrial waste in large amounts, an attempt is made to use it as a replacement for natural resources. The main objective o

APA, Harvard, Vancouver, ISO, and other styles

9

"Effective Utilization of Industrial and Constructional Solid Waste Materials in Foundry Mould Making to Prevent Environment Pollution and Conserve Natural Silica Sand." Global NEST: the international Journal, August 13, 2023. http://dx.doi.org/10.30955/gnj.005045.

Full text

Abstract:

<p>Green sand moulding uses silica sand for metal casting. Silica sand mining and delivery to foundries destroy the ecosystem, making metal casting unsustainable. Due to increased sand-casting output and massive civil buildings in India, the silica sand supply is declining. The depletion and shortage of silica sand necessitate the search for viable replacements. Industrial solid waste from large-scale industrialization pollutes land, air, and water. In order to use industrial waste in large amounts, an attempt is made to use it as a replacement for natural resources. The main objective o

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!