Relevant bibliographies by topics / MQL with cold air

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'MQL with cold air'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'MQL with cold air.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "MQL with cold air"

1

Li, Ji Lin, and Lin Zhu. "Experimental Study on Low-Temperature Cold Cutting Technology." Advanced Materials Research 834-836 (October 2013): 795–98. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.795.

Full text
Abstract:
With the development of environment-friendly cutting technology, the low-temperature MQL technology emerged. In order to solve the problem that caused by cutting heat, it adds the cold air on the foundation of MQL. In the view of low-temperature MQL studies which could reduce the cutting force and heat, we have done a lot of experiments. The experimental results show that the most important reason why the low-temperature MQL can reduce the cutting force effectively is a reliable lubricant film that between tool and chip. At the same time, the cold air take away a large amount of heat thereby i
APA, Harvard, Vancouver, ISO, and other styles
2

Lopes, José Claudio, Kamira Miksa Fragoso, Mateus Vinicius Garcia, et al. "Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning." International Journal of Advanced Manufacturing Technology 105, no. 10 (2019): 4373–87. http://dx.doi.org/10.1007/s00170-019-04571-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

An, Qing Long, Yu Can Fu, and Jiu Hua Xu. "The Application of Cryogenic Pneumatic Mist Jet Impinging in High-Speed Milling of Ti-6Al-4V." Key Engineering Materials 315-316 (July 2006): 244–48. http://dx.doi.org/10.4028/www.scientific.net/kem.315-316.244.

Full text
Abstract:
To solve the problems caused by high temperature in the cutting zone during high-speed milling of Titanium alloys, some cooling methods are employed, such as cold air cooling, high pressure coolant jet impinging, MQL, etc. But all have their shortfalls, both in cooling efficiency and environmental pollution. Here a new high efficiency cooling technology-cryogenic pneumatic mist jet impinging (CPMJI) cooling technology is offered. In this technology, a little quantity of coolant is carried by high pressure cryogenic air (-20) and reaches the machining zone in the form of mist jet. This paper ma
APA, Harvard, Vancouver, ISO, and other styles
4

Jozić, Sonja, Ivana Dumanić, and Dražen Bajić. "EXPERIMENTAL ANALYSIS AND OPTIMIZATION OF THE CONTROLLABLE PARAMETERS IN TURNING OF EN AW-2011 ALLOY; DRY MACHINING AND ALTERNATIVE COOLING TECHNIQUES." Facta Universitatis, Series: Mechanical Engineering 18, no. 1 (2020): 013. http://dx.doi.org/10.22190/fume191024009j.

Full text
Abstract:
The latest trends in machining research show that great efforts are being made to understand the impact of different cooling and lubrication techniques as well as cutting parameters on machining performances. This paper presents the investigation results of different cutting parameters and different cutting environments such as dry machining, minimum quantity lubrication (MQL) and minimum quantity lubrication with compressed cold air (MQL+CCA) on average surface roughness, cutting force and material removal rate. The experiments were designed based on three input parameters and three different
APA, Harvard, Vancouver, ISO, and other styles
5

Singh, Gurraj, Catalin Iulian Pruncu, Munish Kumar Gupta, et al. "Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms." Materials 12, no. 6 (2019): 999. http://dx.doi.org/10.3390/ma12060999.

Full text
Abstract:
Environmental protection is the major concern of any form of manufacturing industry today. As focus has shifted towards sustainable cooling strategies, minimum quantity lubrication (MQL) has proven its usefulness. The current survey intends to make the MQL strategy more effective while improving its performance. A Ranque–Hilsch vortex tube (RHVT) was implemented into the MQL process in order to enhance the performance of the manufacturing process. The RHVT is a device that allows for separating the hot and cold air within the compressed air flows that come tangentially into the vortex chamber
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Yu Fu, Yun Huang, Zhi Huang, and Liang Yi. "Belt Grinding of TC4 Based on the Technology of Cryogenic Mist Jet Combined MQL." Key Engineering Materials 416 (September 2009): 8–12. http://dx.doi.org/10.4028/www.scientific.net/kem.416.8.

Full text
Abstract:
To solve the problems of the reduces in belt life、low in metal removal rate and environmental pollution by using conventional grinding fluid, a new high efficiency and green cooling technology—— The Technology Of Liquid Nitrogen Cryogenic Wind Jet Combined MQL(LNCWJCM), It was used in belt grinding of TC4. The effect of LNCWJCM on grinding performance of TC4 was analyzed to compare with cold air 、liquid nitrogen and conventional flood cooling method. The experimental results indicate that LNCWJCM can improve metal removal rate and the life of belt, in addition , impacting on abrasive belt grin
APA, Harvard, Vancouver, ISO, and other styles
7

Kieraś, Seweryn, Marek Jakubowski, and Krzysztof Nadolny. "Simulation Studies on Centrifugal MQL-CCA Method of Applying Coolant during Internal Cylindrical Grinding Process." Materials 13, no. 11 (2020): 2506. http://dx.doi.org/10.3390/ma13112506.

Full text
Abstract:
This paper describes simulation studies regarding the application of the centrifugal minimum quantity lubrication (MQL) method simultaneously with the delivery of a compressed cooled air (CCA) stream in the internal cylindrical grinding process. The idea of a new hybrid cooling and lubrication method connecting centrifugal (through a grinding wheel) lubrication by MQL with a CCA stream is described. The methodology of computational fluid dynamics (CFD) simulation studies, as well as the results of numerical simulations, are presented in detail. The aim of the simulations was to determine the m
APA, Harvard, Vancouver, ISO, and other styles
8

Peng, Hai, and Qiang Wang. "Design and Simulation Analysis of Low Temperature Air Deep Hole Processing System." Key Engineering Materials 620 (August 2014): 154–59. http://dx.doi.org/10.4028/www.scientific.net/kem.620.154.

Full text
Abstract:
In this paper, a unique design of low temperature of BTA deep-hole machining system based on the green manufacturing was proposed,in which the low temperature air cutting technology was applied to the BTA deep hole processing. Consequently, the system have the characteristics of low temperature air cutting and deep hole processing. The system presented here uses the large flow of cold air (-30 °C ~-20 °C) and oil mixing atomization gas (MQL) for chip removal, cooling and lubricating the tool, thus the use of deep hole cutting oil was decreased, the cooling and lubricating effect of the tool wa
APA, Harvard, Vancouver, ISO, and other styles
9

Peng, Hai, and Tong Li. "MQL Technology Including the BTA Deep Hole Drilling Machining." Advanced Materials Research 189-193 (February 2011): 3071–74. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3071.

Full text
Abstract:
The traditional cast-type method of BTA deep-hole drilling(such as BTA or DF) has cutting fluid consumption of the existence of large, high production costs, pollution of the environment and endangering the health of the operator and other problems. In this paper, the MQL technology (minimum lubrication technology) is applied to the method of BTA deep-hole machining (ie, near-dry deep-hole processing), we also analyzed the function and effect of MQL machining cutting fluid. Through the near-dry deep-hole drilling experiment, we find that a water-soluble cutting fluid has good atomization effec
APA, Harvard, Vancouver, ISO, and other styles
10

Nadolny, Krzysztof, and Seweryn Kieraś. "Experimental Studies on the Centrifugal MQL-CCA Method of Applying Coolant during the Internal Cylindrical Grinding Process." Materials 13, no. 10 (2020): 2383. http://dx.doi.org/10.3390/ma13102383.

Full text
Abstract:
This paper presents the results of experimental research concerning the possibility of supporting the cooling function during internal cylindrical grinding using the minimum quantity lubrication (MQL) method by additional delivery of a compressed cooled air (CCL) stream. The article presents a description of a hybrid method of cooling and lubrication of the grinding zone integrating centrifugal (through a grinding wheel) lubrication with the minimum quantity of lubricant and cooling with a compressed cooled air stream generated by a cold air gun (CAG). The methodology and results of experiment
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "MQL with cold air"

1

Andrade, Ricardo Bega de [UNESP]. "Efeito da refrigeração do ar comprimido utilizado em MQL (mínima quantidade de lubrificante) aplicado ao processo de retificação." Universidade Estadual Paulista (UNESP), 2017. http://hdl.handle.net/11449/151460.

Full text
Abstract:
Submitted by Ricardo Bega de Andrade null (r-b-andrade@hotmail.com) on 2017-08-28T17:12:54Z No. of bitstreams: 1 Andrade, Ricardo Bega de_Dissertação de Mestrado.pdf: 3187731 bytes, checksum: 5e3efba5a483cb1e9e4533e06bf87209 (MD5)<br>Approved for entry into archive by Luiz Galeffi (luizgaleffi@gmail.com) on 2017-08-29T17:50:53Z (GMT) No. of bitstreams: 1 andrade_rb_me_bauru.pdf: 3187731 bytes, checksum: 5e3efba5a483cb1e9e4533e06bf87209 (MD5)<br>Made available in DSpace on 2017-08-29T17:50:53Z (GMT). No. of bitstreams: 1 andrade_rb_me_bauru.pdf: 3187731 bytes, checksum: 5e3efba5a483cb1e9e45
APA, Harvard, Vancouver, ISO, and other styles
2

Redzuan, Norizah. "Cold plasma air decontamination." Thesis, University of Glasgow, 2010. http://theses.gla.ac.uk/2286/.

Full text
Abstract:
Cold Plasma Discharges offer wide decontamination scenarios relevant to environmental, food and drink or clean room applications. The option to operate the discharge system in atmospheric or sub-atmospheric condition provides an opportunity to investigate a lowcost and simple system design. UV to NIR (200nm to 700nm) can be emitted by pulsed cold plasma discharge systems that operate at atmospheric pressure. Different wavelengths emitted from the discharge depend on the pressure and the type of gas mix used in the systems. The scope of the work involved in this research was to design and devel
APA, Harvard, Vancouver, ISO, and other styles
3

Heaton, Richard Walter. "Cold air challenge in airways disease." Thesis, University of Oxford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235876.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jemmett-Smith, Bradley Colin. "Cold air pools over complex terrain." Thesis, University of Leeds, 2014. http://etheses.whiterose.ac.uk/6414/.

Full text
Abstract:
Cold air pools (CAPs) over complex terrain have rarely been investigated in hilly regions that are typical across the UK. This thesis gives a detailed account of CAP observations gained during the COLd air Pooling EXperiment (COLPEX), conducted in the Clun Valley region of Shropshire, England. A short 9–month climatology study reveals that weak CAPs, defined as temperature inversions larger than 1◦C across a valley depth of ∼170m, occur 45% of all nights. Strong CAPs, defined as temperature inversions larger than 4◦C, occur 12% of all nights. Strong CAPs are found to occur when the following “
APA, Harvard, Vancouver, ISO, and other styles
5

Assoufi, B. K. "Cold air, asthma and airways reactivity." Thesis, Imperial College London, 1988. http://hdl.handle.net/10044/1/46945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hu, Shicheng. "An experimental and numerical study of cold air distribution systems." Thesis, University of Liverpool, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.367271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hornberger, Kelli Lynne. "Comparative analyses of the January 2004 cold air outbreak." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/34860.

Full text
Abstract:
Cold air outbreaks (CAOs) occur when large scale atmospheric circulations allow for the incursion of polar air masses into middle and lower latitudes, influencing wintertime temperatures regionally. The January 2004 CAO is identified as a major CAO in the Deep South of the United States in terms of wind chill equivalent temperature or a temperature-only criterion. Surface air temperature, horizontal winds, specific humidity, and Ertel potential vorticity are analyzed for this event using several reanalysis products: National Aeronautic and Space Administration Modern Era Retrospective-Analy
APA, Harvard, Vancouver, ISO, and other styles
8

Jia, Jun. "Melt spinning of continuous filaments by cold air attenuation." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/37276.

Full text
Abstract:
Traditionally ultrafine fibers below 1 dpf are produced by extrusion followed by mechanical drawing. A modified melt spinning apparatus with high-speed air nozzle was designed and fabricated to produce continuous polypropylene filaments by cold air drawing only. With this setup, the fiber is quenched and simultaneously attenuated by a symmetric cold air jet. Since the formation of fiber structure is highly dependent on the processing conditions, the new process will provide a unique operation window to study fiber attenuation and structural formation under high-speed cold air drawing. Based o
APA, Harvard, Vancouver, ISO, and other styles
9

Chylik, Jan. "Variability within cold air outbreaks and implications for parametrization." Thesis, University of East Anglia, 2017. https://ueaeprints.uea.ac.uk/67058/.

Full text
Abstract:
The changing structure of the marginal sea-ice zone (MIZ), together with high temperature gradients between the cold Arctic air and relatively warm sea water, contribute to uncertainty in numerical weather prediction (NWP). Since cold-air outbreaks (CAO) over the MIZ contribute strongly to heat transfer in the polar areas, assessment of variability in them is of a great importance. This thesis deals with extending our understanding of the variability within CAO by means of large eddy simulations, performed in The Met Office Large Eddy Model (LEM). The novel approach of this study lies within:
APA, Harvard, Vancouver, ISO, and other styles
10

Shackelford, Philip Clayton. "Fighting for Air: Cold War Reorganization and the U.S. Air Force Security Service, 1945-1952." Kent State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=kent1461432022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "MQL with cold air"

1

Stafford, William. Words in the cold air. Western Slope Press, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

S, Elleson James, and American Society of Heating, Refrigerating and Air-Conditioning Engineers., eds. Cold air distribution: System design guide. American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Seymour, M. J. Cold downdraughts: Application guide 2/91. Building Services Research and Information Association, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baysal, Oktay. Viscous computations of cold air/air flow around scramjet nozzle afterbody. Langley Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jack, Miller. Cold War Warrior. Mystic Publishers, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Beale Air Force Base during the Cold War. Arcadia Publishing, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stirling, John Bull. A Cold War memoir. M. Stirling, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Schiesser, Trish. These guys: Cold War stories told by cold war warriors 1945-1991. Old Lieutenant Press, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Greene, Jennifer. Baby, it's cold outside. Harlequin, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Baysal, Oktay. Viscous computations of cold air/airflow around scramjet nozzle afterbody. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "MQL with cold air"

1

Lackmann, Gary. "Cold-Air Damming." In Midlatitude Synoptic Meteorology. American Meteorological Society, 2011. http://dx.doi.org/10.1007/978-1-878220-56-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hobkirk, Michael D. "The Cold War — and After?" In Land, Sea or Air? Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-22011-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Arghode, Vaibhav K., and Yogendra Joshi. "Cold Aisle Containment." In Air Flow Management in Raised Floor Data Centers. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-25892-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, Kirk R. "Calculated Risks and Cold Reality." In Biofuels, Air Pollution, and Health. Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-0891-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kaleem Khan, Mohd. "Refrigeration, Air Conditioning and Cold Storage." In Handbook of Food Process Design. Wiley-Blackwell, 2012. http://dx.doi.org/10.1002/9781444398274.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jhuang, M. S., C. M. Chen, S. H. Lu, M. F. Chen, K. P. Lin, and C. L. Tsai. "Physiological Monitoring of Cold-Air Stimulated Rhinitis." In Precision Medicine Powered by pHealth and Connected Health. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7419-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sheppard, Lucy, and Hardy Pfanz. "Impacts of Air Pollutants on Cold Hardiness." In Tree Physiology. Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-015-9650-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Svik, Peter. "Building an Empire of the Red Air." In Civil Aviation and the Globalization of the Cold War. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51603-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hobe, Stephan. "Drones in International Law: The Applicability of Air and Space Law." In From Cold War to Cyber War. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-19087-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zick, Christian. "Cloud Motion Analysis of Cyclones within Cold Air Masses." In Remote Sensing Applications in Meteorology and Climatology. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3881-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "MQL with cold air"

1

Zakaria, Muhammad Firdaus, Mohd Azlan Suhaimi, Safian Sharif, et al. "The application of cold air and nano-MQL as cooling strategy in high speed milling of titanium alloy Ti-6Al-4V: A review." In APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5118183.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Qibo, Iram Lerma, Jorge Alvarado, Immanuel Edinbarough, and Wayne N. P. Hung. "Characterization of Micromist for Effective Machining." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53632.

Full text
Abstract:
This study presents wetting characteristic of several lubricants for minimum quantity lubrication (MQL) by comparing their respective contact angles on different tool and workpiece materials. The size of an airborne droplet is estimated by measuring the profile of average droplets depositing on a polished and flat glass surface. The droplet velocity field in front of a nozzle is simulated numerically, and compared against measured data using anemometry and laser particle image velocimetry techniques. A favorable contact angle of ∼5° is obtained for oil-based lubricants on titanium, stainless s
APA, Harvard, Vancouver, ISO, and other styles
3

Pervilä, Mikko, and Jussi Kangasharju. "Cold air containment." In the 2nd ACM SIGCOMM workshop. ACM Press, 2011. http://dx.doi.org/10.1145/2018536.2018539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nam, Jung Soo, Pil-Ho Lee, and Sang Won Lee. "A Study on Machining and Environmental Characteristics of Micro-Drilling Process Using Nanofluid Minimum Quantity Lubrication." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50248.

Full text
Abstract:
This paper presents two basic experimental studies of a micro-drilling process with nanofluid minimum quantity lubrication (MQL) in terms of machining and environmental characteristics. By using a miniaturized desktop machine tool system, a series of micro drilling experiments were conducted in the cases of dry, compressed air and nanofluid MQL. The experimental results imply that nanofluid MQL significantly reduces the adhesion of chips when compared with the cases of dry and compressed air micro-drilling. As a result, it is observed that the magnitudes of average drilling torque and thrust f
APA, Harvard, Vancouver, ISO, and other styles
5

Nam, Jung Soo, Dae Hoon Kim, and Sang Won Lee. "A Parametric Analysis on Micro-Drilling Process With Nanofluid Minimum Quantity Lubrication." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1223.

Full text
Abstract:
This paper presents a parametric analysis on microdrilling process using nanofluid minimum quantity lubrication (MQL). In this paper, the effects of several machining parameters such as a feed rate, rotational speed and drill diameter on micro drilling performances are investigated under various lubrication conditions — compressed air lubrication, pure MQL and nanofluid MQL. For nanofluid MQL, nanodiamond particles are used with the volumetric concentration of 4 %. A series of microdrilling experiments are carried out in the miniaturized machine tool system. The experimental results show the n
APA, Harvard, Vancouver, ISO, and other styles
6

Mantilla, Weimar, José García, Rafael Guédez, and Alessandro Sorce. "Short-Term Optimization of a Combined Cycle Power Plant Integrated With an Inlet Air Conditioning Unit." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15162.

Full text
Abstract:
Abstract Under new scenarios with high shares of variable renewable electricity, combined cycle gas turbines (CCGT) are required to improve their flexibility, in terms of ramping capabilities and part-load efficiency, to help balance the power system. Simultaneously, liberalization of electricity markets and the complexity of its hourly price dynamics are affecting the CCGT profitability, leading the need for optimizing its operation. Among the different possibilities to enhance the power plant performance, an inlet air conditioning unit (ICU) offers the benefit of power augmentation and “mini
APA, Harvard, Vancouver, ISO, and other styles
7

Young, Matthew, and Stephen Idem. "An Experimental Investigation of Cold Air-to-Air Ejectors." In 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-4281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Fengqi, Jinhai He, Jianhua Li, and Hongjiang Li. "Mechanism of Cold-Air Snowstorms and Cause of Locally Strong Cold-Air Snowstorms in the Shandong Peninsula." In 2010 International Conference on Multimedia Technology (ICMT). IEEE, 2010. http://dx.doi.org/10.1109/icmult.2010.5630958.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huang, Jianbing, Zongqiang Mao, Bin Zhu, Lizhai Yang, Ranran Peng, and Ruifeng Gao. "Direct Preparation of Ce0.8Sm0.2O1.9 Powders Oxidized With H2O2 for Low Temperature SOFCs Application." In ASME 2005 3rd International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2005. http://dx.doi.org/10.1115/fuelcell2005-74027.

Full text
Abstract:
A novel method was developed to prepare fine doped ceria (DCO) powders directly. Ceria doped with 20 mol. % of samarium (Ce0.8Sm0.2O1.9, SDC) was prepared by in-situ oxidization of hydroxide precipitates with H2O2 in the solutions. The resultant powder desiccated at 85°C overnight was characterized by X-ray diffraction (XRD), thermogravimetry /differential thermal analysis (TG/DTA), and transmission electron microscopy (TEM). The XRD pattern showed that the as-dried SDC powder is single phase with a cubic fluorite structure like that of pure CeO2. An anode-supported SOFC was also fabricated ba
APA, Harvard, Vancouver, ISO, and other styles
10

Ju, C., L. P. Keranen, K. R. Haapala, D. J. Michalek, and J. W. Sutherland. "Issues Associated With MQL Implementation: Effect on Peripheral Milling Process Performance and Impact on Machining Economics." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79259.

Full text
Abstract:
The copious use of metal working fluids in machining applications carries with it worker health, environmental, and cost concerns. Driven by these concerns, minimum quantity lubrication (MQL) technology has been proposed as an intermediate alternative between flood and dry machining applications. However, widespread use of MQL is inhibited by worries related to unknown costs, thermal distortions, chip flushing problems, flammability of airborne metal dust, and system reliability/repeatability. More information is needed on the effects of lubricant flow rate and droplet characteristics on the c
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "MQL with cold air"

1

Robinson, Scott B., and Laurie A. Blanchard. Cold Air Data Acquisition System Documentation. Defense Technical Information Center, 2003. http://dx.doi.org/10.21236/ada419763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Reading, J. E., D. E. Roberts, and W. K. Prusaczyk. Gender Differences in Finger Temperatures During Cold Air Exposure. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada359127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Francis, William W., and II. Coercive Air Strategy in Post-Cold War Peace Operations. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada387732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Glissmeyer, John A. Cold Vacuum Drying Facility Stack Air Sampling System Qualification Tests. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/781073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

SHAPLEY, B. J., and Y. S. TRAN. Cold Vacuum Drying Instrument Air System Design Description (SYS 12). Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/803970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schoenbauer, Ben, Dave Bohac, Jack McAlpine, and Martha Hewett. Retrofitting Forced Air Combi Systems: A Cold Climate Field Assessment. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1366343.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schoenbauer, Ben, Dave Bohac, Jake McAlpine, and Martha Hewett. Retrofitting Forced Air Combi Systems: A Cold Climate Field Assessment. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1369136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bauman, F. S., P. LaBege, T. Borgers, and A. J. Gadgil. Cold air distribution in office buildings: Technology assessment for California. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6141120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bauman, F. S., T. Borgers, P. LaBerge, and A. J. Gadgil. Cold Air Distribution in Office Buildings: Technology Assessment for California. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/939473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Glissmeyer, John A. Cold Vacuum Drying Facility Stack Air Sampling System Qualification Tests. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/965670.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'MQL with cold air' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography