Relevant bibliographies by topics / Mrad

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Mrad'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Mrad.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Mrad"

1

Сардарлы, Р. М., Ф. Т. Салманов та Н. А. Алиева. "Тип оптических переходов на краю фундаментального поглощения кристаллов TlGaSe-=SUB=-2-=/SUB=- и TInS-=SUB=-2-=/SUB=-, подвергнутых γ-облучению". Журнал технической физики 127, № 9 (2019): 420. http://dx.doi.org/10.21883/os.2019.09.48194.324-18.

Full text
Abstract:
The effect of gamma irradiation on the optical properties of layered TlGaSe2 and TlInS2 crystals in the wavelength range of 400–1,100 nm at 300 K is studied. From the analysis of optical absorption spectra, the energies of direct and indirect optical interband transitions before and after gamma irradiation are determined. It is shown that as the gamma-irradiation dose is accumulated in the range of 0–25 Mrad by TlGaSe2 and TlInS2 single crystals, the energies of direct and indirect allowed optical transitions increase from Egd = 2.06 eV and Egi = 1.90 eV at D = 0 Mrad to Egd = 2.11 eV and Egi
APA, Harvard, Vancouver, ISO, and other styles
2

Ali, Y., S. Ullah, S. A. Khattak, and M. Ajaz. "Study of pion kaon and proton in proton–carbon interactions at 158 GeV/c using hadron production models." Modern Physics Letters A 34, no. 10 (2019): 1950078. http://dx.doi.org/10.1142/s0217732319500780.

Full text
Abstract:
In this work, we investigate the production of [Formula: see text], [Formula: see text] mesons, protons and antiprotons, by exploiting the theoretical hadron production models: EPOS 1.99, EPOS-LHC and QGSJETII-04, using proton–carbon collisions at a potential laboratory momentum of 158 GeV/c. Laboratory momentum-dependent double differential yields of these particles are studied where it is produced at a polar angle ranging from 0 mrad to 420 mrad for [Formula: see text] mesons while for [Formula: see text] mesons, protons and antiprotons, the angle ranges from 0 mrad to 360 mrad. The QGSJET p
APA, Harvard, Vancouver, ISO, and other styles
3

Ajaz, M., Y. Ali, S. Ullah, Q. Ali та U. Tabassam. "Comparison of different hadron production models for the study of π±, K±, protons and antiprotons production in proton–carbon interactions at 90 GeV/c". Modern Physics Letters A 33, № 14 (2018): 1850079. http://dx.doi.org/10.1142/s0217732318500797.

Full text
Abstract:
In this research paper, comprehensive results on the double differential yield of [Formula: see text] and [Formula: see text] mesons, protons and antiprotons as a function of laboratory momentum in several polar angle ranges from 0–420 mrad for pions, 0–360 mrad for kaons, proton and antiproton are reported. EPOS 1.99, EPOS-LHC and QGSJETII-04 models are used to perform simulations. The predictions of these models at 90 GeV/c are plotted for comparison, which shows that QGSJETII-04 model gives overall higher yield for [Formula: see text] mesons in the polar angle interval of 0–40 mrad but for
APA, Harvard, Vancouver, ISO, and other styles
4

Tsukamoto, R., Giuseppe Pezzotti, M. Ogino, et al. "Zirconia Knee Wear and Raman Spectroscopy Studies Compares 3.5-Mrad and 7-Mrad UHMWPE Inserts." Key Engineering Materials 309-311 (May 2006): 1285–88. http://dx.doi.org/10.4028/www.scientific.net/kem.309-311.1285.

Full text
Abstract:
We studied the long-term wear behaviour of alumina-doped zirconia femoral condyles against ultra-high molecular weight polyethylene (UHMWPE) tibial inserts. The simulator kinematics included 20 degrees of flexion/extension, ± 5 degrees of internal/external rotation, and 6 mm of anterior/posterior translation. All knee components were subjected to 10 million cycles of normal walking (2.6 KN max, freq. 1.8 Hz). Lubricant was 50% alpha-calf serum (20 mg/ml protein) with EDTA. The tibial inserts were from one lot of ram-extruded UHMWPE and sterilized with 3.5-Mrad or 7-Mrad radiation dose. Soak co
APA, Harvard, Vancouver, ISO, and other styles
5

Becker, R., та W. B. Herrmannsfeldt. "Why π and mrad?" Review of Scientific Instruments 77, № 3 (2006): 03B907. http://dx.doi.org/10.1063/1.2166430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

SWELGARD, E. L., F. R. BUSKIRK, J. R. NEIGHBOURS, et al. "EFFECT OF ELECTRON IRRADIATION ON HIGH Tc SUPERCONDUCTORS." Modern Physics Letters B 02, no. 09 (1988): 1055–59. http://dx.doi.org/10.1142/s0217984988000916.

Full text
Abstract:
High T c bulk superconductors, YBa 2 Cu 3 O 6.7 and GdBa 2 Cu 3 O 6.7, were irradiated with 67.5 MeV electrons at dose levels from 0.3 Mrad to 150 Mrad. Resistance versus temperature data show little change in T c after irradiation but significant structural degradation was observed.
APA, Harvard, Vancouver, ISO, and other styles
7

Davis, Edward T., Joseph Pagkalos, and Branko Kopjar. "Polyethylene manufacturing characteristics have a major effect on the risk of revision surgery in cementless and hybrid total hip arthroplasties." Bone & Joint Journal 102-B, no. 1 (2020): 90–101. http://dx.doi.org/10.1302/0301-620x.102b1.bjj-2019-0779.r1.

Full text
Abstract:
Aims The aim of this study was to identify the effect of the manufacturing characteristics of polyethylene acetabular liners on the survival of cementless and hybrid total hip arthroplasty (THA). Methods Prospective cohort study using linked National Joint Registry (NJR) and manufacturer data. The primary endpoint was revision for aseptic loosening. Cox proportional hazard regression was the primary analytical approach. Manufacturing variables included resin type, crosslinking radiation dose, terminal sterilization method, terminal sterilization radiation dose, stabilization treatment, total r
APA, Harvard, Vancouver, ISO, and other styles
8

LIAO, AN-CHI, WEI-TOU NI, and JOW-TSONG SHY. "PICO-WATT AND FEMTO-WATT WEAK-LIGHT PHASE LOCKING." International Journal of Modern Physics D 11, no. 07 (2002): 1075–85. http://dx.doi.org/10.1142/s021827180200258x.

Full text
Abstract:
Advances in laser physics and its applications have triggered the proposition and development of Laser Astrodynamics. In carrying out research projects on Laser Space Programs, it is necessary to process the laser signal sent back from remote spacecraft. After traveling an extremely long distance, the power of this signal is greatly reduced. Weak-light phase-locking is the key technique used for signal amplification in these space projects. After the returning laser beam is collected by telescope, it is used to phase-lock a local laser oscillator. The local laser then carries the phase informa
APA, Harvard, Vancouver, ISO, and other styles
9

Ishikawa, Daisuke, and Alfred Q. R. Baron. "Temperature-gradient analyzers for non-resonant inelastic X-ray scattering." Journal of Synchrotron Radiation 28, no. 3 (2021): 756–68. http://dx.doi.org/10.1107/s160057752100179x.

Full text
Abstract:
The detailed fabrication and performance of the temperature-gradient analyzers that were simulated by Ishikawa & Baron [(2010). J. Synchrotron Rad. 17, 12–24] are described and extended to include both quadratic and 2D gradients. The application of a temperature gradient compensates for geometric contributions to the energy resolution while allowing collection of a large solid angle, ∼50 mrad × 50 mrad, of scattered radiation. In particular, when operating relatively close to backscattering, π/2 − θB = 1.58 mrad, the application of a gradient of 1.32 K per 80 mm improves the measured total
APA, Harvard, Vancouver, ISO, and other styles
10

El-Shobaky, G. A., A. M. Ghozza та G. M. Mohamed. "Effect of γ-Irradiation on Some Surface and Catalytic Properties of Cr2O3/Al2O3 Solids Precalcined at 700°C". Adsorption Science & Technology 16, № 3 (1998): 163–74. http://dx.doi.org/10.1177/026361749801600302.

Full text
Abstract:
The effects of γ-irradiation (20–160 Mrad) on the surface characteristics (SBET, VP and r) and catalytic properties (in CO oxidation by O2) of chromia/ alumina solids have been investigated. The solids were prepared by mechanical mixing of CrO3 with finely powdered Al(OH)3, followed by drying at 120°C and calcination in air at 700°C. The amounts of chromia in the samples were 8.2 wt% and 27.1 wt%, respectively. The results obtained show that doses of 20–40 Mrad brought about a measurable increase in the surface characteristics (SBET, 46%; VP, 93%; r, 31%) of the sample containing 27.1 wt% Cr2O
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Mrad"

1

Chedid, Youssef. "Typologie musicale de l’hymnodie syriaque de l’Église Maronite : la tradition du Père Maroun Mrad (Ordre Antonin Maronite)." Thesis, Paris 4, 2015. http://www.theses.fr/2015PA040134.

Full text
Abstract:
Cette thèse se propose de transcrire et analyser dans le but de créer une typologie de l’hymnodie syriaque de l’Église Maronite selon la tradition de l’illustre chantre de l’Ordre Antonin Maronite Père Maroun Mrad. L’Église Maronite, étant une église catholique orientale, elle a conservé et l’union avec l’Église Universelle et son identité et tradition musicale et liturgique. L’objet de mes analyses est l’ensemble des hymnes enregistrées par la voix du Père Maroun Mrad, un des porteurs de la tradition orale au sein de l’Ordre Antonin Maronite. Cet enregistrement est produit par le Père Ivar Sc
APA, Harvard, Vancouver, ISO, and other styles
2

Mrad, David [Verfasser], and Roland [Akademischer Betreuer] Frankenberger. "Experimentelle Untersuchung des Einflusses von medikamentösen Einlagen auf die definitive Wurzelfüllung - 2 neue Wurzelkanalsealer im Vergleich zum Standard AH-Plus / David Mrad. Gutachter: Roland Frankenberger." Erlangen : Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 2014. http://d-nb.info/1054342377/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mrad, Lamia [Verfasser], and Theodor [Akademischer Betreuer] Ickler. "Tempus, Aspekt oder Modus? - die Verbalformen und ihre Bedeutungen im Arabischen : eine Untersuchung anhand von Beispielen aus dem Koran und ausgewählten deutschen und französischen Koranübersetzungen / Lamia Mrad. Betreuer: Theodor Ickler." Erlangen : Universitätsbibliothek der Universität Erlangen-Nürnberg, 2013. http://d-nb.info/103442548X/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mrad, Lamia Verfasser], and Theodor [Akademischer Betreuer] [Ickler. "Tempus, Aspekt oder Modus? - die Verbalformen und ihre Bedeutungen im Arabischen : eine Untersuchung anhand von Beispielen aus dem Koran und ausgewählten deutschen und französischen Koranübersetzungen / Lamia Mrad. Betreuer: Theodor Ickler." Erlangen : Universitätsbibliothek der Universität Erlangen-Nürnberg, 2013. http://nbn-resolving.de/urn:nbn:de:bvb:29-opus-45982.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Seabra, de Azevedo João Batista. "Test et fiabilité des mémoires MRAM." Thesis, Montpellier 2, 2013. http://www.theses.fr/2013MON20155/document.

Full text
Abstract:
De nos jours, les mémoires occupent une grande superficie en silicium dans les System-on-Chip. Très largement utilisés, les mémoires Flash non volatiles présentent encore plusieurs inconvénients. Les MRAMs permettent de répondre à toutes les problématiques liées aux Flash. Cependant, elles sont sujettes à des défauts comme tout autre type de mémoire. Très peu de travaux portent sur le test de MRAM et la recherche effectuée dans ce domaine vise principalement la première génération de mémoires magnétiques. Dans ce travail, la physique derrière la modélisation MTJ est abordée. Cette compréhensio
APA, Harvard, Vancouver, ISO, and other styles
6

Das, Jayita. "Auxiliary Roles in STT-MRAM Memory." Scholar Commons, 2014. https://scholarcommons.usf.edu/etd/5613.

Full text
Abstract:
Computer memories now play a key role in our everyday life given the increase in the number of connected smart devices and wearables. Recently post-CMOS memory technologies are gaining significant research attention along with the regular ones. Spin Transfer Torque Magnetoresistive RAM (STT-MRAM) is one such post-CMOS memory technology with a rapidly growing commercial interest and potential across diverse application platforms. Research has shown the ability of STT-MRAM to replace different levels of memory hierarchy as well. In brief, STT-MRAM possesses all the favorable properties of a univ
APA, Harvard, Vancouver, ISO, and other styles
7

Sarno, Thomas. "Caractérisation sécuritaire des mémoires magnétiques MRAM." Thesis, Saint-Etienne, EMSE, 2015. http://www.theses.fr/2015EMSE0796.

Full text
Abstract:
La MRAM est une technologie de mémoire non-volatile émergente, elle a la particularité de stocker les données sous forme d’orientations de moments magnétiques. Ses performances sont intéressantes et surpassent les technologies actuelles sur plusieurs aspects. Crocus Technology développe une nouvelle génération de MRAM, les TAS-MRAM (pour ThermallyAssistedSwitching MRAM). Ces MRAM ont la particularité d’effectuer les opérations d’écritures à hautes températures, améliorant ainsi la consommation électrique et facilitant sa réduction d’échelle. Les TAS-MRAM sont développées pour des applications
APA, Harvard, Vancouver, ISO, and other styles
8

Qazi, Masood. "A 4kb memory array for MRAM development." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/41552.

Full text
Abstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Includes bibliographical references (p. 129-131).<br>The circuits for a A 4kb array of Magnetic Tunnel Junctions (MTJs) have been designed and fabricated in a 0:18¹m CMOS process with three levels of metal. Support circuitry for addressing, reading, writing, and test mode probing enables the characterization of the switching of
APA, Harvard, Vancouver, ISO, and other styles
9

Vijayaraghavan, Rangarajan M. Eng Massachusetts Institute of Technology. "An analysis of MRAM based memory technologies." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/37679.

Full text
Abstract:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2006.<br>Includes bibliographical references (leaves 66-68).<br>MRAM is a memory (RAM) technology that uses electron spin to store information. Often been called "the ideal memory", it can potentially combine the density of DRAM with the speed of SRAM and non-volatility of FLASH memory or hard disk, and all this while consuming a very low amount of power. However, it is the need for a fast and non-volatile computer memory that has been the key driver for evolution of this technology. At the mom
APA, Harvard, Vancouver, ISO, and other styles
10

Brum, Raphael Martins. "Conception hybride CMOS et mémoires magnétiques : applications aux architectures programmables." Thesis, Montpellier 2, 2014. http://www.theses.fr/2014MON20141.

Full text
Abstract:
Avec la réduction continue des dimensions des transistors CMOS, le développement des mémoires statiques du type SRAM énergétiquement efficientes et de hautes densités devient de plus en plus difficile. Les dernières années ont vu l'apparition de nouvelles technologies de mémoire, qui ont attiré l'intérêt de la communauté académique, ainsi que de nombreux acteurs industriels. Parmi ces technologies, la STT-MRAM se distingue pour ses caractéristiques très avantageuses, comme sa faible consommation, ses performances et sa facilité d'intégration dans une technologie de fabrication CMOS. En plus, l
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Mrad"

1

Vasilʹev, A. D. Rezulʹtaty razrabotki moduli︠a︡ perenosa ėnergii izlucheniem v AZ i VKU RU VVĖR pri zaproektnykh avarii︠a︡kh, modulʹ MRAD. In-t problem bezopasnogo razvitii︠a︡ atomnoĭ ėnergetiki, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mrak. Narodna knj. Alfa, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vulin, Aleksandar. Mrak. Izdavački grafički atelje "M", 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jevtić, Branislav. Rujni mraz. Dereta, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mart, Mikhail. Bezdomnyĭ mrak. "Ripol Klassik", 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ḱulavkova, Katica. Tenok mraz. Makavej, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jevtić, Branislav. Rujni mraz. Dereta, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bivšek, Gašper. Provinca. Mrak. Študentska založba, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Samer, Chamoun, and Widrig Daniel, eds. Morphê: MRGD. Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jevtić, Branislav. Rujni mraz. Dereta, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Mrad"

1

Tsukamoto, R., Giuseppe Pezzotti, M. Ogino, et al. "Zirconia Knee Wear and Raman Spectroscopy Studies Compares 3.5-Mrad and 7-Mrad UHMWPE Inserts." In Bioceramics 18. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-992-x.1285.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jin, Hanmin, and Terunobu Miyazaki. "MRAM." In The Physics of Ferromagnetism. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-25583-0_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fujita, Shinobu. "MRAM Circuits." In Handbook of Spintronics. Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-007-7604-3_41-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fujita, Shinobu. "MRAM Circuits." In Handbook of Spintronics. Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-94-007-6892-5_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bandiera, Sébastien, and Bernard Dieny. "Thermally Assisted MRAM." In Handbook of Spintronics. Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-007-7604-3_40-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bandiera, Sébastien, and Bernard Dieny. "Thermally Assisted MRAM." In Handbook of Spintronics. Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-94-007-6892-5_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Papadakis, Ioannis N. M., and Stelios C. A. Thomopoulos. "Duality in Mrac." In Engineering Systems with Intelligence. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-2560-4_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meaney, James F. M., and Peter Beddy. "Pulmonary MRA." In Magnetic Resonance Angiography. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-1686-0_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shekhar, Shashi, and Hui Xiong. "MRA-Tree." In Encyclopedia of GIS. Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-35973-1_835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vogl, Thomas J. "Neuropädiatrische MRA." In MR-Angiographie und MR-Tomographie des Gefäßsystems. Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-78980-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Mrad"

1

Mangiagalli, L., A. Pezzotta, D. Tagnani, et al. "15 Mrad ionizing radiation dose effect on GEMINI." In 2017 13th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME). IEEE, 2017. http://dx.doi.org/10.1109/prime.2017.7974153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chung, Ki-Sup. "Increased performance with 12-mrad sagittal-focusing monochromator." In The 11th US national synchrotron radiation instrumentation conference (SRI99). AIP, 2000. http://dx.doi.org/10.1063/1.1291792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Finch, Nolan S., and Charles E. Andraka. "Uncertainty Analysis and Characterization of the SOFAST Mirror Facet Characterization System." In ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/es2011-54455.

Full text
Abstract:
Sandia Optical Fringe Analysis Slope Tool (SOFAST) is a mirror facet characterization system based on fringe reflection technology that has been applied to dish and heliostat mirror facet development at Sandia National Laboratories and development partner sites. The tool provides a detailed map of mirror facet surface normals as compared to design and fitted surfaces. In addition, the surface fitting process provides insights into systematic facet slope characterization, such as focal lengths, tilts, and twist of the facet. In this paper, a preliminary analysis of the sensitivities of the face
APA, Harvard, Vancouver, ISO, and other styles
4

Ganapathi, Gani B., Art Palisoc, Bill Nesmith, Gyula Greschik, Koorosh Gidanian, and Andrew Kindler. "Low-Cost Lightweight Thin Film Solar Concentrators." In ASME 2014 8th International Conference on Energy Sustainability collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/es2014-6475.

Full text
Abstract:
A low-cost rigid foam-based concentrator technology development program was funded by the DOE SunShot Initiative to meet installed cost goals of $75/m2 vs. current costs of $200–250/m2. The cost reduction in this approach focuses primarily on designing a mirror module with a rigid foam center with stainless steel facesheets and reflective film. The low mechanical strength of the foam is compensated by optimizing the densities and dimensions to meet pointing accuracy requirements of 4 milliradians (mrad) in 27mph winds. Two alpha concentrators were built to validate the mirror module manufactur
APA, Harvard, Vancouver, ISO, and other styles
5

Sayer, Robert A., Timothy P. Koehler, Scott M. Dalton, Thomas W. Grasser, and Ronald L. Akau. "Thermal Contact Conductance of Radiation-Aged Thermal Interface Materials for Space Applications." In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17408.

Full text
Abstract:
Thermal interface materials (TIMs) serve a critical role in thermal management by enhancing heat transfer across contact interfaces. Specifically, they are most commonly used in electronics to enhance the flow of heat from source to sink by decreasing the overall thermal resistance of the system. In space, these materials are exposed to high doses of Gamma radiation due to the lack of an atmosphere to serve as an absorbing medium. With typical design lifetimes of 5 to 10 years, total radiation exposure can be significant and can adversely affect the thermal contact resistance (TCR) of the TIM.
APA, Harvard, Vancouver, ISO, and other styles
6

Meiser, Siw, Christoph Kleine-Büning, Ralf Uhlig, Eckhard Lüpfert, Björn Schiricke, and Robert Pitz-Paal. "Finite Element Modeling of Parabolic Trough Mirror Shape in Different Mirror Angles." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91264.

Full text
Abstract:
Deviations from the ideal shape of reflector panels for parabolic trough solar power plants have relevant impact on field efficiency and thus on the performance of the whole power plant. Analyzing the gravity-induced deformation of mirror shape for different mirror angles is relevant for performance calculation of solar parabolic trough collectors and identifying optimization potential of the mirror panels. Two mirror model versions (stiff and elastic supports) are evaluated in four angles: in horizontal laboratory angle (mirrors facing upward with mounting points horizontally aligned), and in
APA, Harvard, Vancouver, ISO, and other styles
7

Fujisaki, Shinya, and Minoru Watanabe. "Ultrasonic sensor system with a 94 Mrad total-ionizing-dose tolerance." In 2018 IEEE International Conference on Semiconductor Electronics (ICSE). IEEE, 2018. http://dx.doi.org/10.1109/smelec.2018.8481328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Akagi, Kouta, and Minoru Watanabe. "100 mrad total-ionizing dose tolerance experiment of a laser array." In 2015 IEEE International Conference on Space Optical Systems and Applications (ICSOS). IEEE, 2015. http://dx.doi.org/10.1109/icsos.2015.7425076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ito, Yoshizumi, Minoru Watanabe, and Akifumi Ogiwara. "Demonstrating a holographic memory having 100 Mrad total-ionizing-dose tolerance." In 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, 2016. http://dx.doi.org/10.1109/icmae.2016.7549569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Appleby, R., D. Toprek, D. Angal-Kalinin, P. Bambade, S. Cavalier, and O. Dadoun. "Improved 2 mrad crossing angle layout for the international linear collider." In 2007 IEEE Particle Accelerator Conference (PAC). IEEE, 2007. http://dx.doi.org/10.1109/pac.2007.4440608.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Mrad"

1

Moffeit, Ken, Takashi Maruyama, Yuri Nosochkov, Andrei Seryi, and Mike Wood. Comparison of 2 mrad and 14/20 mrad Crossing Angle Extraction Lines. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/887075.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Toprek, Dragan, /VINCA Inst. Nucl. Sci., Belgrade, Yuri Nosochkov, and /SLAC. Effects of Magnet Errors in the ILC 14 mrad Extraction Line. Office of Scientific and Technical Information (OSTI), 2009. http://dx.doi.org/10.2172/952992.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Moffeit, Ken, Takashi Maruyama, Yuri Nosochkov, Andrei Seryi, Mark Woodley, and Mike Woods. Proposal to Modify the Polarimeter Chicane in the ILC 14 mrad Extraction Line. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/901838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Toprek, Dragan, and Yuri Nosochkov. Evaluation and Compensation of Detector Solenoid Effects on Disrupted Beam in the ILC 14 mrad Extraction Line. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/944550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ferrari, A., and Y. Nosochkov. Beam Losses in the Extraction Line of a TeV E+ E- Linear Collider With a 20-Mrad Crossing Angle. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/878350.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Daughton, James M. Advanced MRAM Concepts. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada452441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Stark, D. R. MRAP: A Limited Capability. Defense Technical Information Center, 2008. http://dx.doi.org/10.21236/ada508971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Beech, Russell, and Robert Sinclair. Low Power 256K MRAM Design. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada449576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cerjan, C., and B. P. Law. Magnetic Random Access Memory (MRAM) Device Development. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/15006522.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shriberg, Elizabeth, Raj Dhillon, Sonali Bhagat, Jeremy Ang, and Hannah Carvey. The ICSI Meeting Recorder Dialog Act (MRDA) Corpus. Defense Technical Information Center, 2004. http://dx.doi.org/10.21236/ada460980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Mrad' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography