Log in

Relevant bibliographies by topics / Multilayred composite plates

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Multilayred composite plates'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Multilayred composite plates.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Multilayred composite plates"

1

Santo, Loredana, Fabrizio Quadrini, and Denise Bellisario. "Multilayered Composite Plates with Shape Memory Properties." Key Engineering Materials 699 (July 2016): 1–7. http://dx.doi.org/10.4028/www.scientific.net/kem.699.1.

Full text

Abstract:

In this study, multilayered composite plates with shape memory properties were produced: carbon fibers prepreg are alternated with layers of shape memory epoxy powder obtaining composite with different number of layers. The differences in the load exerted during shape recovery, and percentage and time of recovery of the composites as a function of layers number have been evaluated. In particular, the actuation load and the shape recovery percentage were measured after a V-shape memorizing step of the composites. The experimental results are very promising, showing that such multilayers can suc

APA, Harvard, Vancouver, ISO, and other styles

2

BRISCHETTO, SALVATORE. "AN EXACT 3D SOLUTION FOR FREE VIBRATIONS OF MULTILAYERED CROSS-PLY COMPOSITE AND SANDWICH PLATES AND SHELLS." International Journal of Applied Mechanics 06, no. 06 (2014): 1450076. http://dx.doi.org/10.1142/s1758825114500768.

Full text

Abstract:

A 3D free vibration analysis of multilayered structures is proposed. An exact solution is developed for the differential equations of equilibrium written in general orthogonal curvilinear coordinates. The equations consider a geometry for shells without simplifications and allow the analysis of spherical shell panels, cylindrical shell panels, cylindrical closed shells and plates. The method is based on a layer-wise approach, the continuity of displacements and transverse shear/normal stresses is imposed at the interfaces between the layers of the structures. Results are given for multilayered

APA, Harvard, Vancouver, ISO, and other styles

3

Rao, Ananda M., Ch Ratnam, J. Srinivas, and A. Premkumar. "Optimum design of multilayer composite plates using simulated annealing." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 216, no. 3 (2002): 193–97. http://dx.doi.org/10.1177/146442070221600304.

Full text

Abstract:

This paper proposes the use of a simulated annealing (SA) approach to the optimal design of multilayered composite plate structures. The orientation fibres and the number of layers in laminated composites play a major role in determining strength and stiffness. Therefore, the basic design problem is to determine the optimum stacking sequence of the composite laminate. The SA technique is employed to obtain the optimum fibre orientation of multilayered composite plates, so as to maximize fundamental natural frequency. The composite plate is discretized and analysed by a finite element (FE) anal

APA, Harvard, Vancouver, ISO, and other styles

4

Aydaraliev, Zh, M. Abdiev, and Yu Ismanov. "Two-layer Composite Reinforced With Basalt Fibers of Various Lengths." Bulletin of Science and Practice 6, no. 5 (2020): 12–20. http://dx.doi.org/10.33619/2414-2948/54/01.

Full text

Abstract:

The article considers the issues of creating composites using long, continuous structures along the entire length of the structure, and short basalt fibers, and, based on them, multilayer composite materials as reinforcement. A mathematical description of the strength properties of multilayer composite materials based on layers of composites using long, continuous along the entire length of the structure, and short basalt fibers as reinforcement is considered. The results of theoretical studies showed that the multilayer composite material has improved properties. The first layer of material,

APA, Harvard, Vancouver, ISO, and other styles

5

Noor, Ahmed K., and W. Scott Burton. "Computational Models for High-Temperature Multilayered Composite Plates and Shells." Applied Mechanics Reviews 45, no. 10 (1992): 419–46. http://dx.doi.org/10.1115/1.3119742.

Full text

Abstract:

The focus of this review is on the hierarchy of composite models, predictor-corrector procedures, the effect of temperature-dependence of material properties on the response, and the sensitivity of the thermomechanical response to variations in material parameters. The literature reviewed is devoted to the following eight application areas: Heat transfer; thermal stresses; curing, processing and residual stresses; bifurcation buckling; vibrations of heated plates and shells; large deflection and postbuckling problems; and sandwich plates and shells. Extensive numerical results are presented sh

APA, Harvard, Vancouver, ISO, and other styles

6

Wei, Z., L. H. Yam, and L. Cheng. "Delamination Assessment of Multilayer Composite Plates Using Model-based Neural Networks." Journal of Vibration and Control 11, no. 5 (2005): 607–25. http://dx.doi.org/10.1177/1077546305052317.

Full text

Abstract:

A procedure for damage detection in multilayer composites is described using model-based neural networks and vibration response measurement. The appropriate finite element model is established to generate the training data of neural networks. Internal delaminations with different sizes and locations are considered as the particular damage scenarios in multilayer composite plates. The damage-induced energy variation of response signal is investigated, and the mechanism of mode-dependent energy dissipation of composite plates due to delamination is revealed. In order to obtain the structural dyn

APA, Harvard, Vancouver, ISO, and other styles

7

Noor, Ahmed K., and Jeanne M. Peters. "Thermomechanical Buckling of Multilayered Composite Plates." Journal of Engineering Mechanics 118, no. 2 (1992): 351–66. http://dx.doi.org/10.1061/(asce)0733-9399(1992)118:2(351).

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Veerappan, Balasubramani, K. L. Gokulraju, S. Sreenivas, and K. J. Nagarajan. "Failure Analysis in a Multilayerd Glass Fiber Reinforced Polyester Composite Plates under Flexural Loading." Materials Science Forum 1081 (March 24, 2023): 67–81. http://dx.doi.org/10.4028/p-h235pa.

Full text

Abstract:

The usage of laminated glass fiber reinforced polyester composites in aerospace applications helps to reduce overall weight of the aerospace structures. The flexural strength of the laminated glass fiber reinforced composites becomes more important when they are employing for aeroplane wings. In this work, a laminated glass fiber polyester composite with two distinct sets of six different woven lamina stacking sequences is manufactured via hand layup technique. The effect of stacking sequence over the total ply failure load are investigated through universal testing machine. Finally, the progr

APA, Harvard, Vancouver, ISO, and other styles

9

Pysarenko, O. "DISPERSION OF LAMB WAVES IN MULTILAYER STRUCTURES." Mechanics And Mathematical Methods 6, no. 2 (2024): 124–35. http://dx.doi.org/10.31650/2618-0650-2024-6-2-124-135.

Full text

Abstract:

Low cost, the possibility of online monitoring and high sensitivity distinguish the method of structural monitoring using Lamb waves from other available methods. Structural analysis based on Lamb waves in heterogeneous materials requires fundamental knowledge of the behavior of Lamb waves in such materials. This basic knowledge is critical for signal processing in determining possible damage that can be detected by the propagating wave. Recently, Lamb wave methods have been used to simultaneously survey large areas of composite structures. However, such methods are more complex than tradition

APA, Harvard, Vancouver, ISO, and other styles

10

Dat, Pham Tien, and Nguyen Hoa Thinh. "Some results in studying multilayered composite plates." Vietnam Journal of Mechanics 21, no. 2 (1999): 89–98. http://dx.doi.org/10.15625/0866-7136/9990.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Multilayred composite plates"

1

Долгіх, Володимир Миколайович, Владимир Николаевич Долгих та Volodymyr Mykolaiovych Dolhikh. "Исследование несущей способности сжатой упругой многослойной пластины из композиционного материала с межслоевым расслоением". Thesis, Сумский государственный университет, 2009. http://essuir.sumdu.edu.ua/handle/123456789/62431.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Allen, Aaron Andrew. "Stability results for damped multilayer composite beams and plates." [Ames, Iowa : Iowa State University], 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Yang, Wei. "Interaction of acoustic waves and anisotropic multilayered composite plates immersed in water." Diss., The University of Arizona, 1994. http://hdl.handle.net/10150/186960.

Full text

Abstract:

In this dissertation a theoretical analysis of elastic wave propagation in multilayered anisotropic composite plates is presented. Reflection and transmission coefficients as a function of the plane wave incident angle and ultrasonic wave frequency are computed for single layered and multilayered plates. From the minima of the reflection spectra one can obtain the Lamb wave modes. Computation of the displacement and stress components inside the plate show that different Lamb wave modes excite different levels of energy at various depths of the plate. These modes can be effectively used to dete

APA, Harvard, Vancouver, ISO, and other styles

4

Baroud, Rawad. "Development and implementation of numerical models for the study of multilayered plates." Thesis, Paris Est, 2016. http://www.theses.fr/2016PESC1084/document.

Full text

Abstract:

L’utilisation des multicouches prend de plus en plus d’ampleur dans le domaine des sciences de l’ingénieur, tout d’abord dans l’industrie, et plus récemment de plus en plus en Génie Civil. Qu’il s’agisse de complexes mêlant des polymères, du bois ou du béton, des efforts importants sont nécessaires pour la modélisation fine de ce type de matériaux. En effet, des phénomènes induits par l’anisotropie et l’hétérogénéité sont associés à ces multi-matériaux : effets de bords, dilatations thermiques différentielles, délaminages/décollements ou non linéarités de type viscosite

APA, Harvard, Vancouver, ISO, and other styles

5

Marchetti, Fabien. "Modelling and characterisation of anisotropic multilayered plates on a wide frequency range." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEI130.

Full text

Abstract:

Le présent travail de thèse traite de la modélisation vibratoire et de la caractérisation dynamique de matériaux multicouches anisotropes. Dans le premier chapitre, une classification de quelques modèles analytiques de multicouche et techniques de caractérisation expérimentales de structures planes est établie sous la forme d'une synthèse bibliographique. Elle regroupe les récents résultats publiés autour du sujet. Le second chapitre propose une extension d'un modèle équivalent de multicouche au cas des structures anisotropes. Ce modèle décrit les premières courbes de dispersion de la structur

APA, Harvard, Vancouver, ISO, and other styles

6

Oguibe, Chukwuma Nnamdi. "A finite element study of the elastic-plastic indentation and the response of composite structural components to impact and impulse loading." Thesis, Leeds Beckett University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

IURLARO, LUIGI. "Development of refined models for multilayered composite and sandwich structures: analytical formulation, FEM implementation and experimental assessment." Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2606162.

Full text

Abstract:

Over the last three decades, composite materials have been increasingly used in different engineering field due to their high stiffness-to-weight and strength-to-weight ratios. Nowadays, relatively thick laminated composite and sandwich materials with one hundred or more layers find their applications in primary load-bearing structural components of the modern aircraft. To ensure a reliable design and failure prediction, accurate evaluation of the strain/stress state is mandatory. A high-fidelity analysis of multilayered composite and sandwich structures can be achieved by adopting detailed 3D

APA, Harvard, Vancouver, ISO, and other styles

8

Wenzel, Christian. "Local FEM Analysis of Composite Beams and Plates : free-Edge effect and Incompatible Kinematics Coupling." Thesis, Paris 10, 2014. http://www.theses.fr/2014PA100107/document.

Full text

Abstract:

Cette thèse traite des problèmes des concentrations de contraintes locales, en particularité des effets des bords libres dans des structures stratifiés. À l'interface entre deux couches avec des propriétés élastiques différentes, les contraintes ont un comportement singulier dans le voisinage du bord libre en supposant un comportement de matériau élastique linéaire. Par conséquent, ils sont essentiels pour promouvoir le délaminage. Via Formulation unifiée de la Carrera (CUF) différents modèles cinématiques sont testés dans le but de capter les concentrations de contraintes. Dans la première pa

APA, Harvard, Vancouver, ISO, and other styles

9

Parra, Martinez Juan Pablo. "On multilayered system dynamics and waves in anisotropic poroelastic media." Doctoral thesis, KTH, VinnExcellence Center for ECO2 Vehicle design, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-195801.

Full text

Abstract:

The mechanical and acoustic anisotropy of media is a governing factor in the behaviour of multilayered systems including such media. The understanding of the mechanisms conditioning the dynamic behaviour of multilayered systems is of paramount importance. In particular, the intrinsic anisotropy of poroelastic media presents a potential for the optimal design of systems for multifunctional performances. Indeed, these multilayered systems are bound by stiffness, thermal and acoustic performance constraints in simultaneously. A plane wave method is presented to study the influence of material ori

APA, Harvard, Vancouver, ISO, and other styles

10

URRACI, ANDREA. "Development of accurate and efficient structural models for analysis of multilayered and sandwich structures of industrial interest." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2829677.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Multilayred composite plates"

1

K, Binienda Wieslaw, Pindera M. J. 1951-, Lewis Research Center, and United States. National Aeronautics and Space Administration., eds. Frictionless contact of multilayered composite half planes containing layers with complex Eigenvalues. National Aeronautics and Space Administration, Lewis Research Center, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Frictionless contact of multilayered composite half planes containing layers with complex Eigenvalues. National Aeronautics and Space Administration, Lewis Research Center, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Multilayred composite plates"

1

Gay, Daniel. "Transverse Shear Behavior of Multilayered Plates." In Composite Materials, 4th ed. CRC Press, 2022. http://dx.doi.org/10.1201/9781003195788-21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Karunasena, W., A. H. Shah, and S. K. Datta. "Ultrasonic Characterization of Multilayered Thick Composite Plates." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3742-7_64.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kartuzov, V. V., B. A. Galanov, S. M. Ivanov, and I. E. Krasikova. "The Modification of Hydrodynamic Model of Alekseevskii-Tate for Multylayered and Gradient Plates." In Advanced Multilayered and Fibre-Reinforced Composites. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-007-0868-6_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chimenti, D. E., and Adnan H. Nayfeh. "Ultrasonic Reflection and Wave Propagation in Multilayered Composite Plates." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0817-1_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tarn, Jiann-Quo. "An Asymptotic Finite Element Model for Multilayered Composite Plates." In Computational Mechanics ’95. Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-79654-8_368.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Destuynder, Philippe, and Michel Salaun. "A Numerical Model for Delamination of Composite Multilayered Plates." In Mathematical Analysis of Thin Plate Models. Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/978-3-642-51761-7_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gherlone, Marco, and Marco Di Sciuva. "Dynamic Behaviour of Undamaged and Damaged Multilayered Composite Plates." In Damage Assessment of Structures VII. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-444-8.531.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Solovev, I. A., M. V. Shitikova, and A. V. Mazaev. "Static Three-Point Bending Tests on 3D Printed Multilayer Composite Plates." In Proceedings of the 6th International Conference on Construction, Architecture and Technosphere Safety. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-21120-1_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kundu, Tribikram, Prasanna Karpur, Theodore E. Matikas, and Perikles D. Nicolaou. "Lamb Wave Mode Sensitivity to Detect Various Material Defects in Multilayered Composite Plates." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0383-1_29.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Quy, Hoang Ngoc, Hong Phuc Nguyen, TruongGiang Nguyen, Hoai Nguyen, Pham Van Thanh, and Haidang Phan. "Inverse Characterization of Multilayered Composite Plates Using Ultrasonic Guided Waves and Machine Learning Algorithms." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-76197-3_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Multilayred composite plates"

1

Manes, Andrea, and Marco Giglio. "A Numerical Optimization of Lightweight Multilayer Armour." In Vertical Flight Society 71st Annual Forum & Technology Display. The Vertical Flight Society, 2015. http://dx.doi.org/10.4050/f-0071-2015-10263.

Full text

Abstract:

Aim of the paper is to present a validated numerical methodology for the optimization of a multilayer armour. The optimization is intended to warrant the same ballistic capability (of a monolithic ballistic steel plate) with respect to a small caliber AP bullet but with a reduction in weight. The use of aluminium and composite layers has been considered. An advanced but efficient numerical methodology is proposed and validated against experimental data from the literature and from tests carried out by the authors. Although the methodology is not directly applied to a specific helicopter frame,

APA, Harvard, Vancouver, ISO, and other styles

2

Nasrekani, Farid Mahboubi, Aniket Raj, and Manav Kumar. "Stress and buckling analysis of multilayered composite plates with different cut-outs using finite element method." In International Conference on Mechanical, Automotive and Mechatronics Engineering. ECER, 2023. http://dx.doi.org/10.53375/icmame.2023.110.

Full text

Abstract:

This study is a numerical analysis where multiple layers of plates with different orientations were combined to form a composite plate. Within this study, the concept of in-plane tensile loading and buckling upon an orthotropic multi-layered plate with different cut-outs is discussed. The finite element method is used to conduct modeling and analysis of the composite plate where the plate has different geometric shape cut-outs to test for parameters such as deflection, stress-strain distribution, buckling, and other effects of cut-outs on the cross-section of the plate.

APA, Harvard, Vancouver, ISO, and other styles

3

Kundu, Tribikram, Catherine Potel, and Jean-Francois de Belleval. "Near Lamb mode imaging of multilayered composite plates." In SPIE's 5th Annual International Symposium on Nondestructive Evaluation and Health Monitoring of Aging Infrastructure, edited by Ajit K. Mal. SPIE, 2000. http://dx.doi.org/10.1117/12.385024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Nishi, Keijiro, Shigeru Tanaka, and Shigeru Itoh. "A Study of Developing Composite Material of Penetrated Diamond Particles Into Metal Plate." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77593.

Full text

Abstract:

An explosive welding technique which uses underwater shock wave to weld thin aluminum plate has been studied and the technical advantages were reported. In this research, we propose a method to produce a composite material using an underwater shock wave generated by detonation of explosive. In the production process, a metal plate (flyer plate) accelerates to a high speed by the underwater shock wave, and collided with diamond particles and penetrated the metal plate. Diamonds were used as the particles and aluminum plates (A1050) as the flyer plates. Diamond has high hardness and excellent th

APA, Harvard, Vancouver, ISO, and other styles

5

Natarajan, Raghu N., Hannah J. Lundberg, Ted Oegema, and Gunnar B. Andersson. "A Novel Multilayered Annular Model to Predict Delamination in a Lumbar Intervertebral Disc." In ASME 2009 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2009. http://dx.doi.org/10.1115/sbc2009-205127.

Full text

Abstract:

Disc degeneration normally is accompanied by structural changes in the intervertebral discs and the end plates. Reduced level of water in the disc, osteophytes formation and geometrical changes in the end plates also accompany the disc degeneration process. Structural changes in the disc due to degeneration can be classified into radial, peripheral and circumferential tears. Radial tears normally extend from inner annulus region to the outer annulus in the radial direction. These may be due to the failure of annular fibers. Peripheral tears in the annulus normally occur near the junction betwe

APA, Harvard, Vancouver, ISO, and other styles

6

Yan, Fei, Cliff J. Lissenden, and Joseph L. Rose. "Directivity profiles of ultrasonic guided wave phased arrays for multilayer composite plates." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Tribikram Kundu. SPIE, 2009. http://dx.doi.org/10.1117/12.815787.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Seshu, P., and V. Ramamurti. "Comparative Performance of Isotropic and Composite Bladed Disks." In ASME 1989 Design Technical Conferences. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/detc1989-0122.

Full text

Abstract:

Abstract Using a 3-noded, multilayered anisotropic triangular plate and shell element combined with cyclic symmetry method, a comparison has been drawn on the steady state as well as free vibration behaviour of isotropic and composite bladed disks, taking into account all the geometric and material complexities. Results are presented for a representative model for three cases – isotropic bladed disk, isotropic disk-composite blade, and composite bladed disk.

APA, Harvard, Vancouver, ISO, and other styles

8

Stolte, James. "Free Vibration of Laminated Composite Beams and Plates Using ADINA Finite Element Code." In ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium collocated with the ASME 1995 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/cie1995-0759.

Full text

Abstract:

Abstract Composite materials are being investigated in advanced technology test beds for use in future armored vehicles. We are particularly interested in the response to impulsive loading for which the knowledge of natural frequency behavior is important. In this paper, we investigate the natural frequency analysis capabilities of the multilayered shell element of the ADINA finite element code as applied to laminated composite beams and plates. Results are compared to those published in the literature or those derived from exact solutions. The ADINA shell element employs a first-order shear d

APA, Harvard, Vancouver, ISO, and other styles

9

Scano, D. "Analysis of composite beams, plates, and shells using Jacobi polynomials and NDK models." In Aerospace Science and Engineering. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902677-22.

Full text

Abstract:

Abstract. In this work, hierarchical Jacobi-based expansions are explored for the static analysis of multilayered beams, plates, and shells as structural theories as well as shape functions. Jacobi polynomials, denoted as P_p^((γ,θ) ), belong to the family of classical orthogonal polynomials and depend on two scalars parameters 𝛾 and 𝜃, with p being the polynomial order. Regarding the structural theories, layer wise and equivalent single-layer approaches can be used. It is demonstrated that the parameters 𝛾 and 𝜃 of the Jacobi polynomials are not influential for the calculations. These polynom

APA, Harvard, Vancouver, ISO, and other styles

10

Hernandez, Johnathan, Quentin Fouliard, Caroline Anderson, et al. "In-Situ XRD Characterization of Interface Strains In Multilayered Ceramic Composite Systems for Hypersonics Applications." In 23rd AIAA International Space Planes and Hypersonic Systems and Technologies Conference. American Institute of Aeronautics and Astronautics, 2020. http://dx.doi.org/10.2514/6.2020-2421.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!