Log in

Relevant bibliographies by topics / Multiple Shell and Tube Heat Exchanger

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Multiple Shell and Tube Heat Exchanger'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Multiple Shell and Tube Heat Exchanger.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Multiple Shell and Tube Heat Exchanger"

1

Pavan, Vishwakarma* Jitendra Jayant. "ANALYSIS OF MULTIPLE SHELL AND TUBE HEAT EXCHANGER BY VARYING THE INPUT PARAMETERS COMPUTATIONAL FLUID DYNAMICS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 72–83. https://doi.org/10.5281/zenodo.802830.

Full text

Abstract:

A heat exchanger is a device that is used to transfer thermal energy (enthalpy) between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. In heat exchangers, there are usually no external heat and work interactions. The aim of the present dissertation work focus on the design and thermal analysis of multiple shell and tube heat exchanger. Heat exchanger designed, justifying the phenomenon of convection within the shell and tubes. The study presents the linear static-steady thermal analysis of a

APA, Harvard, Vancouver, ISO, and other styles

2

Ahmad, Mateen, Waseem Saeed, and Khaqan Javed. "Temperature Distribution Analysis along the Length of Floating Head Multi Stream Heat Exchanger." International Journal of Chemical Engineering and Applications 12, no. 3 (2021): 17–21. http://dx.doi.org/10.18178/ijcea.2021.12.3.790.

Full text

Abstract:

Heat transfer between two streams is common and simple and well established and perfectly commercialized. Normally, the exchanger that is used for this purpose is shell and tube heat exchanger but in some industrial production unit where more than one reactant is to be preheated or pre-cooled for chemical reaction and same as post heating and post cooling required of multiple streams at same or different temperatures, Problem that is associated with such type shell and tube heat exchanger is that it can’t handle the multiple stream and for handling multiple streams we required more number of e

APA, Harvard, Vancouver, ISO, and other styles

3

Medeiros, M. S., and A. J. K. Leiroz. "A PROCEDURE FOR TUBE COUNT DETERMINATION IN SINGLE AND MULTIPLE PASS TUBULAR HEAT EXCHANGERS." Revista de Engenharia Térmica 4, no. 2 (2005): 97. http://dx.doi.org/10.5380/reterm.v4i2.5408.

Full text

Abstract:

The development of a simple computational procedure that allows the precise determination of important parameters for the thermal and mechanical design of tubular heat exchangers is discussed in the present work. The design of tubular heat exchangers for a wide variety of applications can involve the use of empirical expressions and data tables for the determination of the tube bundle parameters, such as the tube count and the tube bundle outside diameter. The motivation for developing the discussed procedure resides in addressing cases for which empirical expressions are inapplicable or data

APA, Harvard, Vancouver, ISO, and other styles

4

Chauhan, Jeel, Krish Panchal, Parth Mewada, and Sajid Shaikh. "Modified on Shell and Tube Heat Exchanger." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 513–18. http://dx.doi.org/10.22214/ijraset.2022.41294.

Full text

Abstract:

Abstract: Heat transfer is one of the most important processes in many industries. For this a heat exchanger is used. There are many different types of heat exchanger available that are double tube heat exchanger, Shell and Tube heat exchanger, tube in tube heat exchanger, Plate heat exchanger, Finned heat exchanger etc. In heat exchanger a fluid is used to cool another fluid which is a higher temperature, this is done either with direct contact between the fluids or indirect contact between the fluids with a surface in between. Most common type of heat exchanger used in industries is Shell an

APA, Harvard, Vancouver, ISO, and other styles

5

Eko Susetyo Yulianto and Muhammad Aulia Febriandio Haadin. "ANALYSIS OF MASS FLOW RATE IN COLD WATER INTO FLOW WITH HOT WATER OUTPUT TEMPERATURE IN SHELL AND TUBE HEAT EXCHANGER." International Journal Science and Technology 1, no. 2 (2022): 8–18. http://dx.doi.org/10.56127/ijst.v1i2.135.

Full text

Abstract:

A heat exchanger is a device used to exchange heat and can usually function as a heater or a cooler. There are many types of heat exchangers available today. But the most widely used in industry is the shell and tube type heat exchanger. The shell and tube type heat exchanger has the advantages of being affordable, easy to maintain and has excellent heat transfer performance with a small volume. This paper aims to analyze the effect of mass flow rate on cold water inflow and hot water outlet temperature using water fluid in shell and tube heat exchanger. The design analysis that I did using th

APA, Harvard, Vancouver, ISO, and other styles

6

Moita, Raquel D., Cristina Fernandes, Henrique A. Matos, and Clemente P. Nunes. "A Cost-Based Strategy to Design Multiple Shell and Tube Heat Exchangers." Journal of Heat Transfer 126, no. 1 (2004): 119–30. http://dx.doi.org/10.1115/1.1643087.

Full text

Abstract:

Process Integration has been applied in several industrial processes mainly using standard shell and tube heat exchangers (1-1 or 1-2). The flow arrangement in 1-2 multiple shell and tube heat exchangers involves part counter-current flow and part co-current flow. This fact is accounted for in the design by introducing a FT correction factor into the 1-1 heat exchanger design equation. To avoid some steep regions in the feasible space of heat exchangers design some authors introduce other parameters like XP or G. Until now it was not possible to have an overall map to give some guidelines of h

APA, Harvard, Vancouver, ISO, and other styles

7

Bala Bhaskara Rao, J., V. Ramachandra Raju, and BBVL Deepak. "A smart prediction tool for estimating heat transfer and overall pressure drop from shell-and-tube heat exchanger." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 231, no. 5 (2016): 1053–62. http://dx.doi.org/10.1177/0954408916656388.

Full text

Abstract:

Almost all thermal/chemical industries are equipped with heat exchangers in order to enhance the thermal efficiency. The performance of a shell and tube heat exchanger depends significantly on the design parameters like the tube cross-sectional area, tube orientation, baffle cut, etc. However, there are no specific relationships among these parameters to obtain an optimal design, such that the heat transfer rate is maximized and the pressure drop is minimized. Therefore, experimental and numerical simulations are carried out for a heat exchanger at various process parameters. Heat exchanger co

APA, Harvard, Vancouver, ISO, and other styles

8

Pignotti, A., and P. I. Tamborenea. "Thermal Effectiveness of Multiple Shell and Tube Pass TEMA E Heat Exchangers." Journal of Heat Transfer 110, no. 1 (1988): 54–59. http://dx.doi.org/10.1115/1.3250472.

Full text

Abstract:

The thermal effectiveness of a TEMA E shell-and-tube heat exchanger, with one shell pass and an arbitrary number of tube passes, is determined under the usual symplifying assumptions of perfect transverse mixing of the shell fluid, no phase change, and temperature independence of the heat capacity rates and the heat transfer coefficient. A purely algebraic solution is obtained for the effectiveness as a function of the heat capacity rate ratio and the number of heat transfer units. The case with M shell passes and N tube passes is easily expressed in terms of the single-shell-pass case.

APA, Harvard, Vancouver, ISO, and other styles

9

Surendra, Kumar Vishwakarma* Sanjay Kumbhare K.K. Thakur. "TO DEDUCTION OF MASS FLOW RATE FOR HELICAL HEAT EXCHANGER AT MULTIPLE CROSS-SECTIONS USING CFD." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 9 (2016): 824–31. https://doi.org/10.5281/zenodo.157583.

Full text

Abstract:

Enhancing the heat transfer by the use of helical coils has been studied and researched by many researchers, because the fluid dynamics inside the pipes of a helical coil heat exchanger offer certain advantages over the straight tubes, shell and tube type heat exchanger, in terms of better heat transfer and mass transfer coefficients. Various configurations of coil structure are possible, and the configuration in which there is a series of vertically stacked helically coiled tubes is the most common type. This configuration offers a high compact structure and a high overall heat transfer coeff

APA, Harvard, Vancouver, ISO, and other styles

10

Yang, Jian-Feng, Yuan-Sheng Lin, Han-Bing Ke, Min Zeng, and Qiu-Wang Wang. "Investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles." Energy 115 (November 2016): 1572–79. http://dx.doi.org/10.1016/j.energy.2016.05.090.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Multiple Shell and Tube Heat Exchanger"

1

Cooper, Paul. "Electrically enhanced heat transfer in the shell/tube heat exchanger." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37978.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Venkatesan, Yaamunan. "Effect of maldistribution and flow rotation on the shell side heat transfer in a shell and tube heat exchanger." Thesis, Wichita State University, 2011. http://hdl.handle.net/10057/3990.

Full text

Abstract:

A numerical analysis of flow maldistribution and shell side flow on heat in a shell and tube heat exchanger is presented. The flow field at the inlet and in the headers was obtained by solving conservation equations of mass and momentum by employing k-ε turbulence model. As the flow maldistribution in the header affects the heat transfer performance of the STHE, pressure drop and velocity distribution of the fluid inside the header were analyzed. Two types of headers were considered with varying header length for a Reynolds number range of 1000 to 3000. As the header length was increased to 15

APA, Harvard, Vancouver, ISO, and other styles

3

Finch, Anthony Terrell. "The electrohydrodynamic (EHD) enhancement of convection and boiling in a shell-and-tube heat exchanger." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/16643.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ozden, Ender. "Detailed Design Of Shell-and-tube Heat Exchangers Using Cfd." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/3/12608752/index.pdf.

Full text

Abstract:

Traditionally Shell-and-tube heat exchangers are designed using correlation based approaches like Kern method and Bell-Delaware method. With the advances in Computational Fluid Dynamics (CFD) software, it is now possible to design small heat exchangers using CFD. In this thesis, shell-and-tube heat exchangers are modeled and numerically analyzed using a commercial finite volume package. The modeled heat exchangers are relatively small, have single shell and tube passes. The leakage effects are not taken into account in the design process. Therefore, there is no leakage from baffle orifices and

APA, Harvard, Vancouver, ISO, and other styles

5

Betancourt, Arturo. "Computational study of the heat transfer and fluid structure of a shell and tube heat exchanger." Thesis, Florida Atlantic University, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10172609.

Full text

Abstract:

<p> A common technique to improve the performance of shell and tube heat exchangers (STHE) is by redirecting the flow in the shell side with a series of baffles. A key aspect in this technique is to understand the interaction of the fluid dynamics and heat transfer. Computational fluid dynamics simulations and experiments were performed to analysis the 3-dimensional flow and heat transfer on the shell side of an STHE with and without baffles. Although, it was found that there was a small difference in the average exit temperature between the two cases, the heat transfer coefficient was locally

APA, Harvard, Vancouver, ISO, and other styles

6

Bengtsson, Patrik, and Saikumar Dilip Kumar Vellore. "Experimental validation of a periodic heat transfer CFD model of a vertical shell and tube heat exchanger." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-247914.

Full text

Abstract:

Flow obstructions are used as a passive design element in heat exchangers to enhance heattransfer. Further, a change in flow structure can also have a positive effect on the heat transfer. Avertical shell and tube heat exchanger, used to recover heat in the greywater stream, isinvestigated in this study. The heat exchanger consists of flow obstructions such as annulargrooves and a helical string. The flow structure can be modified to a swirling film flow byadding a passive design element, called a Cyclone generator. This study aims to experimentallyvalidate a periodic heat transfer CFD model o

APA, Harvard, Vancouver, ISO, and other styles

7

Yahaya, Emmanuel. "Optimal Process Design and Sensitivity Analysis of Shell and Tube Heat Exchanger Operated with Nanofluids." Thesis, Curtin University, 2017. http://hdl.handle.net/20.500.11937/68388.

Full text

Abstract:

This research project aims to conduct an optimal design of shell and tube heat exchanger operated with nanofluids using automated Kern’s method. The main objective function of this work is to reduce the total annual cost (covering capital investment and annual operating cost). Results from two case studies indicate that the employment of Al2O3 based nanofluids as heat transfer fluids reduce cost by 40.97% and 55.77%, respectively, compared to the original design with conventional fluids.

APA, Harvard, Vancouver, ISO, and other styles

8

Dobai, Szabolcs. "Rekuperace tepla z odpadních plynů tavicí pece." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400518.

Full text

Abstract:

This master’s thesis deals with the design of heat recovery system from melting furnace waste gases. The first part is devoted to a brief description of heat exchangers, with the special importance being placed on the shell-and-tube heat exchanger. The second part contains a calculation of stoichiometric combustion, design of geometrical dimensions, calculation of pressure drops and power. At the end of the thesis there are various possibilities of utilization of the obtained waste heat and their basic economic assessment.

APA, Harvard, Vancouver, ISO, and other styles

9

Holčapek, Josef. "Návrh topného ohříváku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443176.

Full text

Abstract:

This diploma thesis deals with the design of a feedwater heater. The aim of the work is to perform thermal, hydraulic and stress analysis. A preliminary technical documentation is also part of this work. The first part contains a summary of basic types of heat exchangers and processes of heat transfer. The main part is focused on thermal analysis to determine the main parameters of the heat exchanger. Next part is followed up by hydraulic analysis to determine the pressure drop of the heating water. After that is created design of heat exchanger with stress analysis of the proposed wall thickn

APA, Harvard, Vancouver, ISO, and other styles

10

Ghyoot, Christiaan Jacob. "The modelling of particle build up in shell-and-tube heat exchangers due to process cooling water / Christiaan Jacob Ghyoot." Thesis, North-West University, 2013. http://hdl.handle.net/10394/9511.

Full text

Abstract:

Sasol Limited experiences extremely high particulate fouling rates inside shell-and-tube heat exchangers that utilize process cooling water. The water and foulants are obtained from various natural and process sources and have irregular fluid properties. The fouling eventually obstructs flow on the shell side of the heat exchanger to such an extent that the tube bundles have to be replaced every nine months. Sasol requested that certain aspects of this issue be addressed. To better understand the problem, the effects of various tube and baffle configurations on the sedimentation rate in a shel

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Multiple Shell and Tube Heat Exchanger"

1

Johnson, Antony. Flow, heat transfer and pressure drop on the shell side of a shell and tube heat exchanger. Manchester Polytechnic, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gbadamosi, Raji Olayiwola, and Manfred Nitsche. Heat Exchanger Design Guide: A Practical Guide for Planning, Selecting and Designing of Shell and Tube Exchangers. Elsevier Science & Technology Books, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Heat Exchanger Design Guide: A Practical Guide for Planning, Selecting and Designing of Shell and Tube Exchangers. Elsevier Science & Technology Books, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Multiple Shell and Tube Heat Exchanger"

1

Ali, Hafiz Muhammad, Ali Hassan, and Abdul Wahab. "Shell and Tube Heat Exchanger." In Nanofluids for Heat Exchangers. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3227-4_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Thulukkanam, Kuppan. "Shell and Tube Heat Exchanger Design." In Heat Exchangers. CRC Press, 2024. http://dx.doi.org/10.1201/9781003352044-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Krishnan, S., and G. K. Sadekar. "Variable Pitch Tube Layout Concept for Shell and Tube Heat Exchanger." In Design and Operation of Heat Exchangers. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84450-8_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Jayachandraiah, B., and C. Dinesh Kumar Patel. "Design of Shell-and-Tube Heat Exchanger with CFD Analysis." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4488-0_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Olana, Firew Dereje, Beza Nekatibeb Retta, Tadele Abera Abose, and Samson Mekibib Atnaw. "Shell and Tube Heat Exchanger, Empirical Modeling Using System Identification." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43690-2_40.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wagh, S. M., D. P. Barai, and M. H. Talwekar. "Sensitivity Analysis of Shell and Tube Heat Exchanger Using Chemcad." In Novel Water Treatment and Separation Methods. Apple Academic Press, 2017. http://dx.doi.org/10.1201/9781315225395-20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gugulothu, Ravi, Narsimhulu Sanke, and A. V. S. S. K. S. Gupta. "Numerical Study of Heat Transfer Characteristics in Shell-and-Tube Heat Exchanger." In Numerical Heat Transfer and Fluid Flow. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1903-7_43.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Seralathan, S., R. Vijay, S. Aravind, et al. "Nanofluids in Improving Heat Transfer Characteristics of Shell and Tube Heat Exchanger." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4488-0_43.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Prasad, Shailandra Kumar, and Mrityunjay Kumar Sinha. "Heat transfer analysis in shell-and-tube heat exchanger with helical baffles." In Modeling and Simulation of Fluid Flow and Heat Transfer. CRC Press, 2024. http://dx.doi.org/10.1201/9781032712079-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Selimefendigil, Fatih, Gürel Şenol, and Hakan F. Öztop. "Heat Transfer Enhancement in a Shell and Tube Heat Exchanger Using Hybrid Nanofluid." In Mathematical Modelling of Fluid Dynamics and Nanofluids. CRC Press, 2023. http://dx.doi.org/10.1201/9781003299608-31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Multiple Shell and Tube Heat Exchanger"

1

Rumbo-Arias, Jamel Eduardo, Fabi�n Pino, Martin Pic�n-Nu�ez, Fernando Israel G�mez-Castro, and Jorge Luis Garc�a-Castillo. "NLP Deterministic Optimization of Shell and Tube Heat Exchangers with Twisted Tape Turbulence Promoters." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.139599.

Full text

Abstract:

This study presents a deterministic optimization methodology for the design of shell-and-tube heat exchangers with twisted tape turbulence promoters, focusing on minimizing the total annualized cost (TAC) while balancing thermal performance and energy consumption. A sensitivity analysis was carried out as Case I (Methanol-Water), it reveals that increasing the twist ratio (TR) reduces flow turbulence, resulting in lower fluid velocity, pressure drop (?Pi), and overall heat transfer coefficient (U). Among the turbulence promoters evaluated, twisted tapes with V-cuts achieved a 21.1% increase in

APA, Harvard, Vancouver, ISO, and other styles

2

Xie, Jeffrey, Katy Yazdanfar, Murray Butcher, and Tyler Rockwell. "Corrosion of a Shell-and-Tube Heat Exchanger." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02118.

Full text

Abstract:

Abstract Inspection revealed that the carbon steel tubes of a shell-and-tube heat exchanger suffered wall-loss to a degree of threatening the operation reliability of the heat exchanger. The shell side is cooling water and the tube side is the process stream in this heat exchanger. A metallurgical characterization was conducted on the carbon steel tubes to investigate the failure mechanism and provide recommendations for potential mitigation. Tubes and scales were characterized in terms of microstructures, morphologies and compositions. The tubes were found to suffer corrosion in the form of p

APA, Harvard, Vancouver, ISO, and other styles

3

Xie, Jeffrey, Katy Yazdanfar, Grant Anning, Tyler Rockwell, and Aizaz Ahmed. "Corrosion of a Vertical Shell and Tube Heat Exchanger." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05473.

Full text

Abstract:

Abstract Inspection revealed severe corrosion of heat exchanger tubes after a short period of service, approximately 2.5 years. A pattern was discovered in comparing metal loss between tubes that were blocked from hot process vapor flow (found to be clogged tubes by polymeric materials), versus the tubes with the most severe wall loss where hot process vapor continued to flow. An investigation was conducted to understand the severe corrosion and its mechanisms. Compared to the internal process side, corrosion was found dominantly on the external cooling water side (shell side of the bundle), w

APA, Harvard, Vancouver, ISO, and other styles

4

Queiroz, Luana P., Olve R. Bruaset, Ana M. Ribeiro, and Idelfonso B. R. Nogueira. "Optimization of Shell and Tube Heat Exchangers Using Reinforcement Learning." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.192011.

Full text

Abstract:

This work presents a model for optimizing shell-and-tube heat exchanger design using Q-learning, a reinforcement learning technique. An agent is trained to interact with a simulated environment of a heat exchange model, iteratively refining design configurations to maximize a reward function. This reward function balances heat exchanger effectiveness and pressure drop, emphasizing designs that minimize pressure drop. Results showed that simpler configurations consistently achieved higher rewards, despite complex designs offering better heat transfer efficiency.

APA, Harvard, Vancouver, ISO, and other styles

5

Terenzi, Alessandro, M. Paglialunga, L. Maggiore, and E. Bonato. "MODELLING THE FULL TRANSIENT IN A SHELL AND TUBE HEAT EXCHANGER TUBE RUPTURE EVENT." In 10th Thermal and Fluids Engineering Conference (TFEC). Begellhouse, 2025. https://doi.org/10.1615/tfec2025.hex.055959.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Al-Sulaiman, Saleh, Abdul Razzaq Al-Shamari, Sundip Kuthe, Yousef Khuraibut, and Sharad Londhe. "Study on Repetitive Failure of Gas/Gas Heat Exchanger." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11320.

Full text

Abstract:

Abstract A Gas/Gas shell and tube heat exchanger in gas dehydration unit in gathering center of Oil & Gas production company had failed repeatedly over the years. To investigate the cause of this repetitive failure, detailed visual inspection & Non-Destructive testing (NDT) of a piece of shell plate and pieces of tube from an old scrapped gas/gas heat exchanger was carried out. Additionally X-Ray Diffraction (XRD), Inductively Coupled Plasma (ICP) and chemical analyses of deposits from tube and shell side were performed. The investigation showed that corrosion products, consisting of p

APA, Harvard, Vancouver, ISO, and other styles

7

Cheng, Zhonghua, Zhe Dong, Junyi Li, and Yunlong Zhu. "Heat Transfer Coefficient Estimation of Shell-Tube Heat Exchanger using Recursive Least Squares Method." In 2024 China Automation Congress (CAC). IEEE, 2024. https://doi.org/10.1109/cac63892.2024.10864582.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gu, Ming (Forrest), Louis Pasnik, Derrick Pease, and Trevor G. Seipp. "Case Study: Tube Plugging Evaluation Using Finite Element Analysis Method for Waste Heat Boiler." In ASME 2024 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/pvp2024-123468.

Full text

Abstract:

Abstract Multiple tubes had suffered from wall thinning of a reformer transfer line exchanger. Tube plugging was considered to reduce equipment downtime in lieu of the complex repair or replacement process with new replacement tubes. A case study demonstrates how to evaluate the effect of tube plugging for flexible tubesheet shell-side steam-generating heat exchanger designs. Finite element method was used to calculate the stress of the heat exchanger for the plugged tube scenario. Steady-state temperature profile of the tube and tubesheet was first calculated, and the temperature profiles wer

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Qiuwang, Guidong Chen, Qiuyang Chen, Min Zeng, and Dahai Zhang. "Numerical Studies of a Novel Combined Multiple Shell-Pass Shell-and-Tube Heat Exchanger With Helical Baffles." In ASME 2008 Heat Transfer Summer Conference collocated with the Fluids Engineering, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/ht2008-56217.

Full text

Abstract:

In order to simplify the manufacture and improve heat transfer performance of shell-and-tube heat exchangers (STHXs), we have invented a combined multiple shell-pass STHX with continuous helical baffles. The novel combined multiple shell-pass STHX with continuous helical baffles (NOVEL STHX) is compared with the conventional STHX with segmental baffles by Computational Fluid Dynamics (CFD) method. The numerical results show that, under the same mass flow rate M and the same overall heat transfer rate Qm in the shell side, the overall pressure drop DP of the NOVEL STHX is lower than that of the

APA, Harvard, Vancouver, ISO, and other styles

10

Lambert, Michael A., and Benjamin J. Jones. "Plate Heat Exchanger Adsorber for a Regenerative Adsorption Heat Pump." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-61866.

Full text

Abstract:

The state of the art in regenerative adsorption (solid-vapor) heat pumps achieved to date is a maximum Coefficient of Performance for Cooling (COPC) of 1.1 with 70% regeneration of waste heat. A number of configurations for the heat exchanger within the adsorbent bed have been investigated, including concentric tube, shell and tube, serpentine flat pipe, spiral flat pipe, and single-pass plate type. However, to date, compact (or multiple pass plate) heat exchangers for use with adsorbent beds have not been studied. This investigation explains the challenges involved in this application, and de

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!