To see the other types of publications on this topic, follow the link: Multiwalled nanotubes.

Journal articles on the topic 'Multiwalled nanotubes'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Multiwalled nanotubes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kumar, Lailesh, Syed Nasimul Alam, and Santosh Kumar Sahoo. "Mechanical properties, wear behavior and crystallographic texture of Al–multiwalled carbon nanotube composites developed by powder metallurgy route." Journal of Composite Materials 51, no. 8 (2016): 1099–117. http://dx.doi.org/10.1177/0021998316658946.

Full text
Abstract:
Aluminum (Al)-based metal matrix composites reinforced with multiwalled carbon nanotubes were developed by powder metallurgy route. The Al and multiwalled carbon nanotubes powder mixtures were consolidated under a load of 565 MPa followed by sintering at 550℃ for 2 h in inert atmosphere. Al–1, 2, and 3 wt.% multiwalled carbon nanotube composites were developed. In the present study, the microstructure, mechanical properties, sliding wear behavior, and crystallographic texture of various Al–multiwalled carbon nanotube composites were investigated. The multiwalled carbon nanotubes produced by lo
APA, Harvard, Vancouver, ISO, and other styles
2

Shi, Wen Yan, Jian Zhong Gu, Wen Jing Wu, et al. "Removal of Dye from Textile Dyeing Wastewater by Using Oxidized Multiwalled Carbon Nanotubes." Advanced Materials Research 343-344 (September 2011): 193–98. http://dx.doi.org/10.4028/www.scientific.net/amr.343-344.193.

Full text
Abstract:
The batch removal of dye from textile dyeing wastewater by using nanooxides decorated multiwalled carbon nanotubes was studied under electron beam conditions. The effect of different nanooxides decorated multiwalled carbon nanotubes content and irradiation dosage was also investigated. The color removal efficiency was 94.9% in dose of 17.5kGy. The colour removal efficiency with Fe2O3 decorated multiwalled carbon nanotubes was similar to with TiO2 decorated multiwalled carbon nanotubues. The COD removal efficiency was 52.5% in the dose of 14.0kGy. When the irradiation dose of 17.5kGy, the COD r
APA, Harvard, Vancouver, ISO, and other styles
3

Foong, Phey Yee, Chun Hong Voon, Bee Ying Lim, et al. "Feasibility study on microwave welding of thermoplastic using multiwalled carbon nanotubes as susceptor." Nanomaterials and Nanotechnology 11 (January 1, 2021): 184798042110029. http://dx.doi.org/10.1177/18479804211002926.

Full text
Abstract:
Despite manufacturers’ goal of molding single component products from plastics, the structures of some of the products are far too complex to be molded as a single piece. Therefore, assembly of subcomponents into the final products is important for the manufacturing of many plastic-based products. To date, welding is the most efficient joining method for plastics. In this study, multiwalled carbon nanotubes were proposed as the susceptor for the microwave welding of high-density polyethylene considering multiwalled carbon nanotube is a good microwave absorber. multiwalled carbon nanotubes were
APA, Harvard, Vancouver, ISO, and other styles
4

Alanka, Sandeep, Chanamala Ratnam, and Balla Srinivasa Prasad. "Characterization of cubic tumbler rod milled dispersed carbon nanotubes–Aluminum composites." Journal of Composite Materials 52, no. 28 (2018): 3973–85. http://dx.doi.org/10.1177/0021998318773437.

Full text
Abstract:
In this work, cubic tumbler rod milling was used to disperse X wt% multiwalled carbon nanotubes (X = 0.5, 0.75, 1.0) in an aluminum matrix. Dispersed precursor of aluminum–multiwalled carbon nanotube composite was subsequently consolidated by cold compaction followed by sinter-forged process. Microstructural and mechanical behaviors of as-produced aluminum–multiwalled carbon nanotube composites with different concentration were investigated. Findings revealed that the as-produced Al–0.75 wt% carbon nanotube sinter-forged composite exhibits homogenous distribution and embedded nanotubes confirm
APA, Harvard, Vancouver, ISO, and other styles
5

Natrayan, L., P. V. Arul Kumar, Joshuva Arockia Dhanraj, et al. "Synthesis and Analysis of Impregnation on Activated Carbon in Multiwalled Carbon Nanotube for Cu Adsorption from Wastewater." Bioinorganic Chemistry and Applications 2022 (July 31, 2022): 1–8. http://dx.doi.org/10.1155/2022/7470263.

Full text
Abstract:
Industrial wastes contain more toxins that get dissolved in the rivers and lakes, which are means of freshwater reservoirs. The contamination of freshwater leads to various issues for microorganisms and humans. This paper proposes a novel method to remove excess copper from the water. The nanotubes are used as a powder in membrane form to remove the copper from the water. The multiwalled carbon nanotube is widely used as a membrane for filtration. It contains many graphene layers of nm size that easily adsorbs the copper when the water permeates through it. Activated carbon is the earliest and
APA, Harvard, Vancouver, ISO, and other styles
6

Ribeiro, B., RB Pipes, ML Costa, and EC Botelho. "Electrical and rheological percolation behavior of multiwalled carbon nanotube-reinforced poly(phenylene sulfide) composites." Journal of Composite Materials 51, no. 2 (2016): 199–208. http://dx.doi.org/10.1177/0021998316644848.

Full text
Abstract:
Polyphenylene sulfide-based nanocomposites filled with unmodified multiwalled carbon nanotubes from 0.5 wt% to 8.0 wt% have been prepared by melt mixing technique with a single-screw extruder and hot press. Transmission electronic microscopy and scanning electron microscopy analysis were carried out in order to assess the multiwalled carbon nanotubes dispersion throughout the polyphenylene sulfide matrix. Electrical conductivity of the polymer was dramatically enhanced by about 11 decades between 2.0 wt% and 3.0 wt% of nanotubes, suggesting the formation of three-dimensional conductive network
APA, Harvard, Vancouver, ISO, and other styles
7

Yao, Xiaohu, and Qiang Han. "Buckling Analysis of Multiwalled Carbon Nanotubes Under Torsional Load Coupling With Temperature Change." Journal of Engineering Materials and Technology 128, no. 3 (2005): 419–27. http://dx.doi.org/10.1115/1.2203102.

Full text
Abstract:
The buckling of multiwalled carbon nanotubes under torsional load coupling with temperature change is researched. The effects of torsional load, temperature change, surrounding elastic medium, and van der Waals forces between the inner and outer nanotubes are taken into account at the same time. Using continuum mechanics, an elastic multishell model with thermal effect is presented for buckling of a multiwalled carbon nanotube embedded in an elastic matrix under thermal environment and torsional load. Based on the model, numerical results for the general case are obtained for the thermal effec
APA, Harvard, Vancouver, ISO, and other styles
8

Dobrzańska-Danikiewicz, A. D., D. Łukowiec, D. Cichocki, and W. Wolany. "Comparison Of The MWCNTs-Rh And MWCNTs-Re Carbon-Metal Nanocomposites Obtained In High-Temperature." Archives of Metallurgy and Materials 60, no. 3 (2015): 2053–60. http://dx.doi.org/10.1515/amm-2015-0348.

Full text
Abstract:
Abstract Carbon-metal nanocomposites consisting of multiwalled carbon nanotubes coated with rhodium or rhenium nanoparticles by the high-temperature method were fabricated during the research undertaken. Multiwalled carbon nanotubes fabricated by Catalytic-Chemical Vapour Deposition (CCVD) were used in the investigations. Multiwalled carbon nanotubes functionalisation in acid or in a mixture of acids was applied to deposit rhodium or rhenium nanoparticles onto the surface of carbon nanotubes, and then the material was placed in a solution being a precursor of metallic nanoparticles. The materi
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Z., S. Chen, and J. Zhang. "Effect of Functionalized MWCNTs with Surfactant and Coupling Agent on Properties of LDPE/POE Blends." Journal of Elastomers & Plastics 43, no. 6 (2011): 543–58. http://dx.doi.org/10.1177/0095244311413439.

Full text
Abstract:
The surfactant, sodium dodecylbenzenesulfonate (NaDDBS) and coupling agents, γ-aminopropyltriethoxy sliane (KH550) and isopropyl dioleic(dioctylphosphate) titanate (NDZ101) were used to treat multiwalled carbon nanotubes in this work. The effects of surface modification of multiwalled carbon nanotubes on crystallization behavior, mechanical properties, and electrical properties of low density polyethylene/polyolefin elastomer/multiwalled carbon nanotubes composites were studied. The results showed that NaDDBS, KH550, and NDZ101 had a favorable effect of improving the dispersion of multiwalled
APA, Harvard, Vancouver, ISO, and other styles
10

Carroll, D. L., P. M. Ajayan, and S. Curran. "Local Electronic Structure in Ordered Aggregates of Carbon Nanotubes: Scanning Tunneling Microscopy/scanning Tunneling Spectroscopy Study." Journal of Materials Research 13, no. 9 (1998): 2389–95. http://dx.doi.org/10.1557/jmr.1998.0332.

Full text
Abstract:
The recent application of tunneling probes in electronic structure studies of carbon nanotubes has proven both powerful and challenging. Using scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS), local electronic properties in ordered aggregates of carbon nanotubes (multiwalled nanotubes and ropes of single walled nanotubes) have been probed. In this report, we present evidence for interlayer (concentric tube) interactions in multiwalled tubes and tube-tube interactions in singlewalled nanotube ropes. The spatially resolved, local electronic structure, as determined b
APA, Harvard, Vancouver, ISO, and other styles
11

Dobrzańska-Danikiewicz, A. D., D. Cichocki, and D. Łukowiec. "The MWCNTs-Rh Nanocomposite Obtained By The New High-Temperature Method." Archives of Metallurgy and Materials 60, no. 2 (2015): 1057–63. http://dx.doi.org/10.1515/amm-2015-0259.

Full text
Abstract:
AbstractA nanocomposite was fabricated during the research undertaken, consisting of multiwalled carbon nanotubes coated with rhodium nanoparticles by the new high-temperature method being the subject of the patent claim. High quality multiwalled carbon nanotubes (MWCNTs) with the length of 100÷500 nm and the diameter of 8÷20 nm obtained in advance with Catalytic Chemical Vapour Deposition (CVD) were employed in the investigations. The nanotubes manufactured under the own research contain small amounts of metallic impurities and amorphous carbon deposits. Multiwalled carbon nanotubes functiona
APA, Harvard, Vancouver, ISO, and other styles
12

Cai, Manyuan, Xiaogang Sun, Yanyan Nie, et al. "Electrochemical Performance of Lithium-Ion Capacitors Using Pre-Lithiated Multiwalled Carbon Nanotubes as Anode." Nano 12, no. 04 (2017): 1750051. http://dx.doi.org/10.1142/s1793292017500515.

Full text
Abstract:
Pre-lithiated multiwalled carbon nanotube anode was prepared by internal short circuit approach(ISC) for 5[Formula: see text]min, 30[Formula: see text]min, 60[Formula: see text]min and 120[Formula: see text]min respectively. Lithium ion capacitors (LICs) were assembled by using pre-lithiated multiwalled carbon nanotubes as anodes and activated carbon (AC) as cathodes. The structure of multiwalled carbon nanotubes and electrodes were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electrochemical performance of pre-lithiated multiwalled carbon
APA, Harvard, Vancouver, ISO, and other styles
13

Rodríguez-González, JA, and C. Rubio-González. "Mixed-mode I/II interlaminar fracture toughness of carbon fiber/epoxy composites with the addition of multiwalled carbon nanotubes by spraying technique." Journal of Composite Materials 52, no. 22 (2018): 3045–52. http://dx.doi.org/10.1177/0021998318760383.

Full text
Abstract:
This work reports the effect of multiwalled carbon nanotubes on mixed-mode I/II interlaminar fracture toughness ([Formula: see text]) of unidirectional carbon fiber/epoxy composite laminates made by prepregs. The carbon fiber/epoxy laminates were fabricated in an autoclave with a previous deposition of different multiwalled carbon nanotube contents at their middle plane interface by spraying technique. Mixed-mode bending tests were conducted on carbon fiber/epoxy laminate specimens under different mixed-mode ratios. The results of mixed-mode bending tests showed that the addition of multiwalle
APA, Harvard, Vancouver, ISO, and other styles
14

Wang, Lu Zhi, Lin Yu, Xiao Ling Cheng, Jun He, Le Jia Lin, and Tian Fang. "Synthesis and Performance of Dopa-Modified Multiwalled Carbon Nanotubes." Applied Mechanics and Materials 184-185 (June 2012): 1289–93. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.1289.

Full text
Abstract:
The Dopamine-modified multiwalled carbon nanotubes (MWNT-Dopa) were synthesized by chemical reaction between dopamine (Dopa) and multiwalled carbon nanotubes which oxidazed by mixed-acid (MWNT-COOH). The structure of MWNT-Dopa were analyzed by Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric (TG), Transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) techniques and the dispersity of MWNT-Dopa were studied by Dispersion stability analyzer. The results show that dopamine has been grafted on multiwalled carbon nanotubes successfully, and a dopamine l
APA, Harvard, Vancouver, ISO, and other styles
15

Khalitov, Zufar, Azat Khadiev, Diana Valeeva, and Dmitry Pashin. "Structure of ordered coaxial and scroll nanotubes: general approach." Acta Crystallographica Section A Foundations and Advances 72, no. 1 (2016): 36–49. http://dx.doi.org/10.1107/s2053273315019440.

Full text
Abstract:
The explicit formulas for atomic coordinates of multiwalled coaxial and cylindrical scroll nanotubes with ordered structure are developed on the basis of a common oblique lattice. According to this approach, a nanotube is formed by transfer of its bulk analogue structure onto a cylindrical surface (with a circular or spiral cross section) and the chirality indexes of the tube are expressed in the number of unit cells. The monoclinic polytypic modifications of ordered coaxial and scroll nanotubes are also discussed and geometrical conditions of their formation are analysed. It is shown that tub
APA, Harvard, Vancouver, ISO, and other styles
16

Sowmya, G., BJ Gireesha, and S. Sindhu. "Thermal exploration of radial porous fin fully wetted with SWCNTs and MWCNTs along with temperature-dependent internal heat generation." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, no. 24 (2020): 4945–52. http://dx.doi.org/10.1177/0954406220931555.

Full text
Abstract:
The numerical examination of radiation and natural convection in a porous radial fin along with varying internal heat generation with respect to temperature is carried out in the current study. The aim of this study is to scrutinize the heat transfer phenomenon in fin wetted with water-based carbon nanotubes like single-walled carbon nanotubes and multiwalled carbon nanotubes. In the proposed work, the Darcy’s model is employed for the analysis. The modeled equations are nondimensionalized and solved by utilizing Runge–Kutta–Fehlberg method. The impact of relevant parameters on the heat transf
APA, Harvard, Vancouver, ISO, and other styles
17

Liu, Xingyao, Rongxin Guo, Zhiwei Lin, Yang Yang, Haiting Xia, and Zheng Yao. "Resistance-strain sensitive rubber composites filled by multiwalled carbon nanotubes for structuraldeformation monitoring." Nanomaterials and Nanotechnology 11 (January 1, 2021): 184798042110113. http://dx.doi.org/10.1177/18479804211011384.

Full text
Abstract:
In this article, multiwalled carbon nanotube/natural rubber composites with resistance-strain sensitivity were prepared by solution method, when the electrical percolation threshold of multiwalled carbon nanotube is only ∼3.5 wt%. The mechanical properties and resistance-strain response sensitivity were studied and analyzed systematically. The dispersion of multiwalled carbon nanotubes in the natural rubber matrix was characterized by field-emission scanning electron microscope and X-ray diffractometer. The composite exhibits good deformation sensitivity (gauge factor >27), large strain sen
APA, Harvard, Vancouver, ISO, and other styles
18

Yang, Chao-Kai, Yu-Roung Lee, Tsung-Han Hsieh, Tao-Hsing Chen, and Tsung-Chieh Cheng. "Mechanical Property of Multiwall Carbon Nanotube Reinforced Polymer Composites." Polymers and Polymer Composites 26, no. 1 (2018): 99–104. http://dx.doi.org/10.1177/096739111802600112.

Full text
Abstract:
This study investigates the multiwalled carbon nanotube as potential mechanical reinforcement in epoxy polymer. It is found that, by adding various concentrations of nanotube, both flow stress and fracture strain increased. Furthermore, the presences of the multiwalled carbon nanotubes are found to nucleate crystallization in the epoxy. This crystal growth is thought to enhance the strength of composite. The fracture surface analysis of the composite reinforced by carbon nanotube is used the scanning electron microscopy.
APA, Harvard, Vancouver, ISO, and other styles
19

Xie, Jining, Shouyan Wang, L. Aryasomayajula, and V. K. Varadan. "Effect of nanomaterials in platinum-decorated carbon nanotube paste-based electrodes for amperometric glucose detection." Journal of Materials Research 23, no. 5 (2008): 1457–65. http://dx.doi.org/10.1557/jmr.2008.0177.

Full text
Abstract:
The effect of nanomaterials in platinum-decorated, multiwalled, carbon nanotube-based electrodes for amperometric glucose sensing was investigated by a comparative study with other carbon material-based electrodes such as graphite, glassy carbon, and multiwalled carbon nanotubes. Scanning and transmission electron microscopy and x-ray diffraction were used to investigate their morphologies and crystallinities. Electrochemical impedance spectroscopy was conducted to compare the electrochemical characteristics of these electrodes. The glucose-sensing results from the chronoamperometric measureme
APA, Harvard, Vancouver, ISO, and other styles
20

Liu, Yangshuai, Kaiyuan Shi, and Igor Zhitomirsky. "Azopolymer triggered electrophoretic deposition of MnO2-carbon nanotube composites and polypyrrole coated carbon nanotubes for supercapacitors." Journal of Materials Chemistry A 3, no. 32 (2015): 16486–94. http://dx.doi.org/10.1039/c5ta03969j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Arboleda-Clemente, Laura, Xoán García-Fonte, María-José Abad, and Ana Ares-Pernas. "Role of rheology in tunning thermal conductivity of polyamide 12/polyamide 6 composites with a segregated multiwalled carbon nanotube network." Journal of Composite Materials 52, no. 18 (2017): 2549–57. http://dx.doi.org/10.1177/0021998317749715.

Full text
Abstract:
Effect of multiwalled carbon nanotubes in thermal conductivity of an immiscible blend of polyamides, 50/50 (wt%/wt%) polyamide 12/polyamide 6, was analyzed as function of nanofiller amount and temperature. Effect of the molding temperature in the structure of conductive network was investigated by rheology. Data show that 5 vol% multiwalled carbon nanotubes caused an increase of 41% in thermal diffusivity and 78% in thermal conductivity respect to polyamide blend values. Thermal conductivity improvement could be described by percolation theory, with a low threshold composition (φc = 0.09 vol%
APA, Harvard, Vancouver, ISO, and other styles
22

Mallakpour, Shadpour, and Samaneh Soltanian. "Morphology and thermal properties of nanocomposites based on chiral poly(ester-imide) matrix reinforced by vitamin B1 functionalized multiwalled carbon nanotubes." Journal of Composite Materials 51, no. 16 (2016): 2291–300. http://dx.doi.org/10.1177/0021998316669856.

Full text
Abstract:
Chemical functionalization of carboxylated multiwalled carbon nanotubes with vitamin B1 was carried out under ultrasonic irradiation. The functionalized nanotubes were embedded in a chiral and biodegradable poly(ester-imide) to prepare multiwalled carbon nanotubes reinforced polymer nanocomposites. Optically active poly(ester-imide) was synthesized by step-growth polymerization of aromatic diol and amino acid based diacid. The vitamin B1 functionalized multiwalled carbon nanotubes and the resulting nanocomposites were examined using Fourier-transform infrared spectroscopy, thermogravimetric an
APA, Harvard, Vancouver, ISO, and other styles
23

Petrescu, Emil, and Cristina Cirtoaje. "Electric Properties of Multiwalled Carbon Nanotubes Dispersed in Liquid Crystals and Their Influence on Freedericksz Transitions." Nanomaterials 12, no. 7 (2022): 1119. http://dx.doi.org/10.3390/nano12071119.

Full text
Abstract:
Liquid crystal composites with multiwalled carbon nanotubes present dielectric properties considerably different from those of pure liquid crystal (LC). Using a proper dispersion of nanotubes in the LC-sample and a theoretical model in agreement with the experimental configuration, the dielectric permittivities of multiwalled carbon nanotubes are calculated. The influence of dielectric properties on the Freedericksz transition threshold is discussed. Theoretical values for dielectric permittivities of multiwalled carbon nanotubes are calculated for different temperatures
APA, Harvard, Vancouver, ISO, and other styles
24

Mohamed, Mohamed Mokhtar. "Gold loaded titanium dioxide–carbon nanotube composites as active photocatalysts for cyclohexane oxidation at ambient conditions." RSC Advances 5, no. 57 (2015): 46405–14. http://dx.doi.org/10.1039/c5ra05253j.

Full text
Abstract:
Photocatalytic oxidation of neat cyclohexane with H<sub>2</sub>O<sub>2</sub> was carried out using several types of gold modified materials including titania nanotubes, reduced graphene oxide and titania nanotube–multiwalled carbon nanotube composites under UV irradiation.
APA, Harvard, Vancouver, ISO, and other styles
25

Norani, Muti Mohamed, Tan Yee Chech, and Abdul Kadir Masrom. "Narrow Diameter Carbon Nanotubes (CNTs) for Polymer Composite Reinforcement." Materials Science Forum 517 (June 2006): 129–34. http://dx.doi.org/10.4028/www.scientific.net/msf.517.129.

Full text
Abstract:
Strong and versatile carbon nanotubes are finding new applications in improving conventional polymer-based fibers. Nanotube-reinforced composites could ultimately provide the foundation for a new class of strong and lightweight fibers with properties such as electrical and thermal conductivity unavailable in current fibers. A recent research has discovered that the best type of nanotube for polymer composite reinforcement is the small diameter multiwalled nanotubes (MWNTs). Here, a catalytic technique has been developed to produce narrow diameter bulk multiwalled carbon nanotubes of less than
APA, Harvard, Vancouver, ISO, and other styles
26

Sakharova, Nataliya A., André F. G. Pereira, Jorge M. Antunes, and José V. Fernandes. "Mechanical Characterization of Multiwalled Carbon Nanotubes: Numerical Simulation Study." Materials 13, no. 19 (2020): 4283. http://dx.doi.org/10.3390/ma13194283.

Full text
Abstract:
The elastic properties of armchair and zigzag multiwalled carbon nanotubes were investigated under tensile, bending, and torsion loading conditions. A simplified finite element model of the multiwalled carbon nanotubes, without taking into account the van der Waals interactions between layers, was used to assess their tensile, bending, and torsional rigidities and, subsequently, Young’s and shear moduli. Relationships between the tensile rigidity and the squares of the diameters of the outer and inner layers in multiwalled carbon nanotubes, and between the bending and torsional rigidities with
APA, Harvard, Vancouver, ISO, and other styles
27

Lin, Weiwei, Yonatan Rotenberg, Hadi Fekrmandi, and Cesar Levy. "Buckypaper/DYAD/Buckypaper and Buckypaper/DYAD/ (polyaniline/multiwalled carbon nanotube) composite sensors: Preparation and damping properties characterization." Journal of Composite Materials 52, no. 11 (2017): 1457–64. http://dx.doi.org/10.1177/0021998317725160.

Full text
Abstract:
Buckypaper/DYAD/Buckypaper and Buckypaper/DYAD/(polyaniline/multiwalled carbon nanotube) composites films were made by frit compression method and layer-by-layer attachment method. Transmission electron microscopy and scanning electron microscopy were used to study the morphology properties of polyaniline/multiwalled carbon nanotube and the results showed that carbon nanotubes were well dispersed in the polymer matrix. Free vibration test results showed that the double-sided attachment of the sensor had higher damping ratio values than single-sided attachment. Also, damping ratios were higher
APA, Harvard, Vancouver, ISO, and other styles
28

Khadiev, Azat, and Zufar Khalitov. "Quantitative theory of diffraction by cylindrical scroll nanotubes." Acta Crystallographica Section A Foundations and Advances 74, no. 3 (2018): 233–44. http://dx.doi.org/10.1107/s2053273318003169.

Full text
Abstract:
A quantitative theory of Fraunhofer diffraction by right- and left-handed multiwalled cylindrical scroll nanotubes is developed on the basis of the kinematical approach. The proposed theory is mainly dedicated to structural studies of individual nanotubes by the selected-area electron diffraction technique. Strong and diffuse reflections of the scroll nanotube were studied and explicit formulas that govern relations between the direct and reciprocal lattice of the scroll nanotube are achieved.
APA, Harvard, Vancouver, ISO, and other styles
29

Liu, Jie, Shoushan Fan, and Hongjie Dai. "Recent Advances in Methods of Forming Carbon Nanotubes." MRS Bulletin 29, no. 4 (2004): 244–50. http://dx.doi.org/10.1557/mrs2004.75.

Full text
Abstract:
AbstractSince their discovery, carbon nanotubes, both single-walled and multiwalled, have been a focus in materials research. Fundamental research and application development hinge on high-quality nanotube materials and controlled routes to their organization and assembly. The aim of this article is to provide updated information on recent progress in the synthesis of carbon nanotubes.
APA, Harvard, Vancouver, ISO, and other styles
30

Yao, Shu Shan. "Synthesis of Carbon Nanotubes, Carbon Spheres and Slices of Vertically Aligned Multi-Walled Carbon Nanotubes." Advanced Materials Research 306-307 (August 2011): 1325–29. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.1325.

Full text
Abstract:
Carbon nanotubes, carbon spheres and slices of vertically aligned multiwalled carbon nanotubes (MWNTs) were synthesized simultaneously by chemical vapour deposition (CVD). Electron microscopy image showed carbon nanotubes were multiwalled carbon nanotubes, several micrometers in length. Carbon spheres were of uniform diameter (about 1 μm). Slices of vertically aligned multiwalled carbon nanotubes were about 5 mm in length, 3 mm in width and 8 μm in thickness. The interior of the slice was composed of densely packed, vertical aligned MWNTs, and faceted carbon beads. They were stable and easily
APA, Harvard, Vancouver, ISO, and other styles
31

Alejandro Rodríguez-González, Julio, Carlos Rubio-González, José de Jesús Ku-Herrera, Lourdes Ramos-Galicia, and Carlos Velasco-Santos. "Effect of seawater ageing on interlaminar fracture toughness of carbon fiber/epoxy composites containing carbon nanofillers." Journal of Reinforced Plastics and Composites 37, no. 22 (2018): 1346–59. http://dx.doi.org/10.1177/0731684418796305.

Full text
Abstract:
This work reports the influence of seawater ageing on the mode I and mode II interlaminar fracture toughness ([Formula: see text] and [Formula: see text]) of prepreg-based unidirectional carbon fiber/epoxy laminates containing carbon nanofillers. Double cantilever beam and end notched flexure specimens were fabricated from composite laminates containing multiwalled carbon nanotubes and/or reduced graphene oxide at their middle plane interface. Experimental results showed that the addition of carbon nanofillers moderately increased the [Formula: see text] and [Formula: see text] propagation of
APA, Harvard, Vancouver, ISO, and other styles
32

Chen, Chao, Yanxia Li, Yizhuo Gu, Min Li, and Zuoguang Zhang. "Improvement in skin–core adhesion of multiwalled carbon nanotubes modified carbon fiber prepreg/Nomex honeycomb sandwich composites." Journal of Reinforced Plastics and Composites 36, no. 8 (2017): 608–18. http://dx.doi.org/10.1177/0731684416687042.

Full text
Abstract:
An experimental investigation on the sandwich composites composed of the carbon fiber face sheets and Nomex honeycomb core has been carried out in this study. Multiwalled carbon nanotubes were added into the matrix of prepreg for converting the traditional pure resin adhesive fillet to composites. Resin viscosity was measured to evaluate the effect of the additive amount of multiwalled carbon nanotubes on the rheological properties. The size of adhesive fillet was obtained from the optical microscopy to assess the forming quality. Climbing drum peel test and edgewise compression test were empl
APA, Harvard, Vancouver, ISO, and other styles
33

Kaliappan, S., T. Mothilal, P. Pravin, B. Raja Bharathi, and E. S. Esakkiraj. "Evaluation of Mechanical Behaviour of Multiwalled Nanotubes Reinforcement Particles in Jute-Glass Fibres Hybrid Composites." Advances in Materials Science and Engineering 2023 (April 26, 2023): 1–7. http://dx.doi.org/10.1155/2023/2219460.

Full text
Abstract:
Fibre-reinforced polymers (FRPs) are composite materials of plastics reinforced with fibres. Cars, sea, aeronautics, and foundation projects progressively utilize fibre-reinforced polymers. This study aims to study the effect of adding multiwalled nanotubes fillers into the hybridized jute-glass FRP composites and their relative properties. This study uses multiwalled nanotubes (MWCNTs), and particles-hybrid jute-glass composites containing jute fibre chopped layer mats, woven glass mats, epoxy resin, and multiwalled nanotubes fillers were created using the hand layup method. After adding mult
APA, Harvard, Vancouver, ISO, and other styles
34

Bajwa, Navdeep, Xuesong Li, Pulickel M. Ajayan, and Robert Vajtai. "Mechanisms for Catalytic CVD Growth of Multiwalled Carbon Nanotubes." Journal of Nanoscience and Nanotechnology 8, no. 11 (2008): 6054–64. http://dx.doi.org/10.1166/jnn.2008.sw02.

Full text
Abstract:
Carbon nanotubes possess unique properties that make them potentially ideal materials for various technological applications. However, a basic growth mechanism explaining the way metallic atoms interact with carbon to nucleate, grow and heal CNTs still needs to be understood. In this review paper we describe the mechanisms of catalytic chemical vapor deposition growth of multiwalled carbon nanotubes and carbon nanofibers, the role of various parameters that govern their growth kinetics and the knowledge added to singlewalled nanotube growth. We also examine future strategies needed to reveal c
APA, Harvard, Vancouver, ISO, and other styles
35

Mohammad Haniff, Muhammad Aniq Shazni, Hing Wah Lee, Wai Yee Lee, et al. "Investigation of Low-Pressure Bimetallic Cobalt-Iron Catalyst-Grown Multiwalled Carbon Nanotubes and Their Electrical Properties." Journal of Nanomaterials 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/637939.

Full text
Abstract:
A bimetallic cobalt-iron catalyst was utilized to demonstrate the growth of multiwalled carbon nanotubes (CNTs) at low gas pressure through thermal chemical vapor deposition. The characteristics of multiwalled CNTs were investigated based on the effects of catalyst thickness and gas pressure variation. The results revealed that the average diameter of nanotubes increased with increasing catalyst thickness, which can be correlated to the increase in particle size. The growth rate of the nanotubes also increased significantly by ~2.5 times with further increment of gas pressure from 0.5 Torr to
APA, Harvard, Vancouver, ISO, and other styles
36

Yildirim, Ferhat, Mustafa Aydin, and Ahmet Avci. "Improved mechanical performance of three-dimensional woven glass/epoxy spacer composites with carbon nanotubes." Journal of Reinforced Plastics and Composites 40, no. 13-14 (2021): 533–49. http://dx.doi.org/10.1177/0731684421990893.

Full text
Abstract:
Three-dimensional polymer composites offer various features and design options due to their hollow structure and lightweight. However, to exploit their advantages, it is a must to improve their structural features and mechanical performances including out-plane direction. Although introducing thermoplastic fillers between the plies or multilayered design addresses on this critical issue, the benefits offered by the nanoparticles with superior mechanical properties come a step forward as an another engineering solution. Based on this motivation, the goal of this study is to investigate the impa
APA, Harvard, Vancouver, ISO, and other styles
37

de Oliveira, Mara Cristina Lopes, Olandir Vercino Correa, Rejane Maria Pereira da Silva, et al. "Structural Characterization, Global and Local Electrochemical Activity of Electroless Ni–P-Multiwalled Carbon Nanotube Composite Coatings on Pipeline Steel." Metals 11, no. 6 (2021): 982. http://dx.doi.org/10.3390/met11060982.

Full text
Abstract:
In this work, composite Ni–P-multiwalled carbon nanotube films were produced by electroless deposition. The main goal was to investigate the influence of multiwalled carbon nanotube loading on the local electrochemical behavior of the composite films, as probed by scanning electrochemical microscopy (SECM). The coatings were also characterized with respect to their crystalline structure, surface, and cross-section morphologies. Adhesion strength was examined by scratch tests. The global electrochemical behavior was evaluated by potentiodynamic polarization. The local electrochemical activity w
APA, Harvard, Vancouver, ISO, and other styles
38

Farooq, Umar, Valentina Bertana, Giulia Mossotti, Sergio Ferrero, and Luciano Scaltrito. "Sustainable Manufacturing of Lightweight Hybrid Nanocomposites for Electric Vehicle Battery Enclosures." Polymers 17, no. 8 (2025): 1056. https://doi.org/10.3390/polym17081056.

Full text
Abstract:
Nanocomposite laminates containing carbon fibers, epoxy, and multiwalled carbon nanotubes were fabricated using a vacuum bag process. Ecofriendly ionic liquid (5 wt%)-treated multiwalled carbon nanotubes (pristine and nickel-coated) were added to the epoxy independently, in amounts ranging from 1 wt% to 3 wt%, in order to tailor the mechanical, electrical, and thermal performance of manufactured carbon fiber epoxy composite laminates. These nanocomposite laminates were later characterized through flexural testing, dynamic mechanical analysis, impedance spectroscopy, thermal conductivity tests,
APA, Harvard, Vancouver, ISO, and other styles
39

Zheng, Xiaofang, Yongzhong Huang, Shaodi Zheng, Zhengying Liu, and Mingbo Yang. "Improved dielectric properties of polymer-based composites with carboxylic functionalized multiwalled carbon nanotubes." Journal of Thermoplastic Composite Materials 32, no. 4 (2018): 473–86. http://dx.doi.org/10.1177/0892705718762614.

Full text
Abstract:
The biggest issues in the preparation of carbon nanotube (CNT)-reinforced composites reside in efficient dispersion of CNT into polymer matrix. In our work, a simple acid treatment method was adopted to obtain carboxylic functionalized multiwalled nanotubes (MWNTs), thus improving the dispersion of CNT and interaction between particles and polymer matrix. X-ray photoelectron spectroscopy and Fourier transform infrared showed that the carboxylic groups were introduced onto the surface of MWNTs. The Raman spectroscopy showed that the amorphous carbon materials and impurities decreased after acid
APA, Harvard, Vancouver, ISO, and other styles
40

Li, Juan. "Multiwalled Carbon Nanotubes Reinforced Polypropylene Composite Material." Journal of Nanomaterials 2017 (2017): 1–5. http://dx.doi.org/10.1155/2017/2171356.

Full text
Abstract:
Polypropylene (PP) composites reinforced with multiwalled carbon nanotubes (MWNTs) were prepared by using twin screw extruder. The experimental results showed that with the increasing amount of MWNTs the elongation at break decreased whereas the tensile strength, bending strength, and impact strength increased. By using scanning electron microscope (SEM), we find that the hydroxyl-modified carbon nanotube has better dispersion performance in PP and better mechanical properties.
APA, Harvard, Vancouver, ISO, and other styles
41

Yang, Kang, Hongru Ma, Ming Ma, Haibo Lin, and Xiaoxue Li. "The experiment research and engineering verification on the synergistic lubrication properties of silver and multiwalled carbon nanotubes." Advances in Mechanical Engineering 11, no. 9 (2019): 168781401987979. http://dx.doi.org/10.1177/1687814019879799.

Full text
Abstract:
A synergistic lubrication of silver and multiwalled carbon nanotubes was studied to minimize friction and decrease wear in the rotating mechanical components. Samples of TiAl alloy (TA), TiAl–10 wt% Ag (TAA), and TiAl–10 wt% Ag–1.0 wt% multiwalled carbon nanotubes (TAAM) were prepared using spark plasma sintering. The method of experimental test and engineered verification was used to explore the synergistic lubrication of silver and multiwalled carbon nanotubes in the TAAM sliding against Si3N4 balls on the ball-on-disk tribometer of No. HT-1000. The results showed that the friction and wear
APA, Harvard, Vancouver, ISO, and other styles
42

Isaza M, Cesar A., JM Herrera Ramírez, JE Ledezma Sillas, and JM Meza. "Dispersion and alignment quantification of carbon nanotubes in a polyvinyl alcohol matrix." Journal of Composite Materials 52, no. 12 (2017): 1617–26. http://dx.doi.org/10.1177/0021998317731151.

Full text
Abstract:
In recent years, due to their high specific mechanical properties, polymer matrix composites have been widely used. In particular, carbon nanotubes have been used as reinforcement because of their exceptional properties. In this work, the degree of dispersion and alignment of multiwalled carbon nanotubes into polyvinyl alcohol was quantified, which is a key information to optimize the mechanical properties of composites. For the dispersion of the multiwalled carbon nanotubes into the solution, a magnetic stirring and ultrasonic agitation were used. Finally, the mixture was dried to obtain a mu
APA, Harvard, Vancouver, ISO, and other styles
43

Smoleń, Paweł, Tomasz Czujko, Zenon Komorek, Dominik Grochala, Anna Rutkowska, and Małgorzata Osiewicz-Powęzka. "Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes." Materials 14, no. 12 (2021): 3325. http://dx.doi.org/10.3390/ma14123325.

Full text
Abstract:
This paper investigates the effect of multiwalled carbon nanotubes on the mechanical and electrical properties of epoxy resins and epoxy composites. The research concerns multiwalled carbon nanotubes obtained by catalytic chemical vapor deposition, subjected to purification processes and covalent functionalization by depositing functional groups on their surfaces. The study included the analysis of the change in DC resistivity, tensile strength, strain, and Young’s modulus with the addition of carbon nanotubes in the range of 0 to 2.5 wt.%. The effect of agents intended to increase the affinit
APA, Harvard, Vancouver, ISO, and other styles
44

Khan, Asif Ali, and Shakeeba Shaheen. "Preparations and characterizations of poly-o-toluidine/multiwalled carbon nanotubes/Sn(iv) tungstate composite ion exchange thin films and their application as a Pb(ii) selective electrode." RSC Adv. 4, no. 45 (2014): 23456–63. http://dx.doi.org/10.1039/c4ra01594k.

Full text
Abstract:
Poly-o-toluidine (POT), poly-o-toluidine (POT)/multiwalled carbon nanotubes (MWCNTs), and poly-o-toluidine (POT)/multiwalled carbon nanotubes (MWCNTs)/Sn(iv) tungstate (ST) thin films were prepared by a solution casting method using polystyrene as a binder.
APA, Harvard, Vancouver, ISO, and other styles
45

Rawat, Naveen, Russel Gudyaka, Mohit Kumar, Bharat Joshi, and Kalathur S. V. Santhanam. "Thermogravimetric Analysis of the Interaction of Ferromagnetic Metal Atom and Multiwalled Carbon Nanotubes." Journal of Nanoscience and Nanotechnology 8, no. 4 (2008): 2044–48. http://dx.doi.org/10.1166/jnn.2008.262.

Full text
Abstract:
This paper describes the thermal oxidative behavior of atomized iron or atomized cobalt in the presence of multiwalled carbon nanotubes (MWCNT). The thermogravimetric analysis shows the atomized iron thermal oxidation starts at about 500 °C that is absent when the atomized iron is sintered with multiwalled carbon naonotubes. The thermal oxidation of iron in the sintered samples requires the collapse of the multiwalled carbon nanotubes. A similar behavior is observed with atomized cobalt when its oxidation requires the collapse of the nanotubes. This thermal oxidative shift is interpreted as du
APA, Harvard, Vancouver, ISO, and other styles
46

Dotsenko, Olga, and Anastasia Kachusova. "Influence of Ultrasonic Treatment on Electromagnetic Characteristics of Composites Based on Multiwall Carbon Nanotubes at Microwave Frequencies." Key Engineering Materials 683 (February 2016): 65–70. http://dx.doi.org/10.4028/www.scientific.net/kem.683.65.

Full text
Abstract:
There is a growing demand for light and radar absorbing materials in both commercial and military purposes. In this paper, microwave properties of polimer based composites containing multiwalled carbon nanotubes used as fillers have been analyzed. The multiwall carbon nanotubes used in the composite were about 9.4 nm in diameter. The results show that the ultrasonic treatment modifies the dielectric properties of the composite. Both real and imaginary permittivity of composites is 2 times more than ordinary example after sonicating for 3 minutes.
APA, Harvard, Vancouver, ISO, and other styles
47

Slobodian, P., P. Riha, P. Cavallo, et al. "Highly Enhanced Vapor Sensing of Multiwalled Carbon Nanotube Network Sensors byn-Butylamine Functionalization." Journal of Nanomaterials 2014 (2014): 1–8. http://dx.doi.org/10.1155/2014/589627.

Full text
Abstract:
The sensing of volatile organic compounds by multiwall carbon nanotube networks of randomly entangled pristine nanotubes or the nanotubes functionalized byn-butylamine, which were deposited on polyurethane supporting electrospinned nonwoven membrane, has been investigated. The results show that the sensing of volatile organic compounds by functionalized nanotubes considerably increases with respect to pristine nanotubes. The increase is highly dependent on used vapor polarity. For the case of highly polar methanol, the functionalized MWCNT network exhibits even more than eightfold higher sensi
APA, Harvard, Vancouver, ISO, and other styles
48

Ellis, Thomas K., Christian Paras, Matthew R. Hill, and John A. Stride. "Simple Metal-catalyst-free Production of Carbon Nanostructures." Australian Journal of Chemistry 66, no. 11 (2013): 1435. http://dx.doi.org/10.1071/ch13332.

Full text
Abstract:
We report the metal-catalyst-free production of multiwalled carbon nanotubes and nanobubbles, in a chemical reduction of hexachlorobenzene by metallic sodium, giving high yields (in excess of 80 %) and at temperatures as low as 190°C for multiwalled carbon nanotubes and 100°C for nanobubble formation. The carbon nanotube samples produced under solvothermal conditions were found to consist of large bundles of nanotubes (&gt;50 µm) consistent with a facial growth from the surface of the molten metal. Meanwhile, the nanobubbles produced under ambient pressure were found to be small (≤1 µm), polyd
APA, Harvard, Vancouver, ISO, and other styles
49

Vicente-Santiago, J., J. Cornejo-Jacob, D. Valdez-Pérez, J. Ruiz-García, and R. A. Guirado-López. "Nanotubols under H2O2 exposure: is it possible to poly-hydroxylate carbon nanotubes?" Physical Chemistry Chemical Physics 21, no. 43 (2019): 24077–91. http://dx.doi.org/10.1039/c9cp03148k.

Full text
Abstract:
We present a combined experimental and theoretical study dedicated to analyze the variations in the surface chemistry of hydroxylated multiwalled carbon nanotubes (MWCNTs), so called nanotubols, when exposed to H<sub>2</sub>O<sub>2</sub> at high temperatures.
APA, Harvard, Vancouver, ISO, and other styles
50

Yu, L., S. Ahmad, Sivanesan Appadu, I. Kong, Mou'ad Tarawneh, and Moayad Flaifel. "Comparison of magnetic and microwave absorbing properties between multiwalled carbon nanotubes nanocomposite, nickel zinc ferrite nanocomposite and hybrid nanocomposite." World Journal of Engineering 11, no. 4 (2014): 317–22. http://dx.doi.org/10.1260/1708-5284.11.4.317.

Full text
Abstract:
Three types of fillers were incorporated in the thermoplastic natural rubber by melt blending process. They are NiZn ferrite, multiwalled carbon nanotubes, and hybrid NiZn ferrite/multiwalled carbon nanotubes followed by weight ratio of 1:1. Their magnetic properties and microwave absorbing properties were investigated. The ball-milled techniques, resulted good filler dispersion in hybrid nanocomposite, proven by the matching saturation magnetization experimental values with the theory calculation. It was found that the magnetic property strongly depends on the amount of magnetic particles in
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!