Relevant bibliographies by topics / Nano- and submicrocrystalline materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Nano- and submicrocrystalline materials'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nano- and submicrocrystalline materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nano- and submicrocrystalline materials"

1

Dybiec, Henryk, and Maciej Motyka. "Influence of Grain Refining on Abrasive Wear of Submicrocrystalline Al-Si Alloys." Materials Science Forum 674 (February 2011): 97–103. http://dx.doi.org/10.4028/www.scientific.net/msf.674.97.

Full text
Abstract:
Light weight nano/submicrocrystalline materials are promising group of constructional materials combining low density with high mechanical properties. However, their potential application requires extensive testing of functional properties, e.g. tribological ones, which may be significant and determine their practical use. Available information on abrasive wear and friction coefficients in nano/submicrocrystalline materials is rather poor. Therefore the aim of this paper is to fill the gap in the literature in this field. The AlSi12Fe5Cu3Mg alloy (RS422) produced by rapid solidification and pl
APA, Harvard, Vancouver, ISO, and other styles
2

Noskova, N. I., and A. G. Lavrentyev. "Diagnosis of the structural state of bulk nano- and submicrocrystalline magnetically soft materials." Russian Journal of Nondestructive Testing 48, no. 1 (2012): 44–54. http://dx.doi.org/10.1134/s1061830912010068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Levin, V. P. "The research of thermal capacity of submicrocrystalline powder materials on the basis of nickel aluminide." Izvestiya MGTU MAMI 1, no. 2 (2007): 177–82. http://dx.doi.org/10.17816/2074-0530-69688.

Full text
Abstract:
The paper examines the influence of compacting pressure on the thermal capacity of macrocrystalline and submicrocrystalline powder composition on the basis of nickel aluminide in the wide range of temperatures. It was found that the compacting pressure in the large-dispersed powder mixtures Ni50 Al50 actuates inttermetallides Ni2Al3, NiAl3 according liquid-phase mechanisms at Т ~ 0,85 Tпл, and in fine-dispersed powder mixtures it intensifies the generation of intermetallides according to the solid-phase reaction mechanisms at Т ~ 0,77 Tпл. The obtained results may be used for the analysis of p
APA, Harvard, Vancouver, ISO, and other styles
4

Dobatkin, S. V., A. M. Arsenkin, M. A. Popov, and A. N. Kishchenko. "Production of Bulk Metallic Nano- and Submicrocrystalline Materials by the Method of Severe Plastic Deformation." Metal Science and Heat Treatment 47, no. 5-6 (2005): 188–92. http://dx.doi.org/10.1007/s11041-005-0050-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rogachev, Stanislav O., Evgeniya A. Naumova, Eva A. Lukina, Adrian V. Zavodov, and Vladimir M. Khatkevich. "High Strength Al–La, Al–Ce, and Al–Ni Eutectic Aluminum Alloys Obtained by High-Pressure Torsion." Materials 14, no. 21 (2021): 6404. http://dx.doi.org/10.3390/ma14216404.

Full text
Abstract:
A comparative analysis of the effect of high-pressure torsion (HPT) on the microstructure and tensile properties of the Al–10% La, Al–9% Ce, and Al–7% Ni model binary eutectic aluminum alloys is carried out. An HPT of 20-mm diameter specimens in as-cast state was carried out under constrained conditions, at room temperature, pressure P = 6 GPa, and number of turns N = 5. It is shown that the formation of nano- and submicrocrystalline structures and the refinement of eutectic particles in aluminum alloys simultaneously provide a multiple increase in strength while maintaining a high plasticity
APA, Harvard, Vancouver, ISO, and other styles
6

Kudaibergenova, G. M., R. A. Sovetbayev, and Ye Z. Nugman. "PROBLEMS OF NANOSTRUCTURING OF BLANKS AND THEIR SOLUTION BY METHODS OF INTENSIVE PLASTIC DEFORMATION." Bulletin of Shakarim University. Technical Sciences, no. 1(17) (March 29, 2025): 329–35. https://doi.org/10.53360/2788-7995-2025-1(17)-42.

Full text
Abstract:
Structural materials with ultrafine-grained (UFG) or nano- and submicrocrystalline structure significantly surpass materials obtained by traditional methods, such as casting and pressure processing, in a number of their mechanical characteristics (hardness, etc.). That is why such alloys (mainly alloys based on aluminum, magnesium, titanium) are in constant demand in industry, especially in space, aviation and shipbuilding. The main method for obtaining an ultrafine-grained metal structure is equal-channel angular pressing (ECAP), which is one of the methods of intense plastic deformation (IPD
APA, Harvard, Vancouver, ISO, and other styles
7

Lyashkov, Kirill, Valery Shabashov, Andrey Zamatovskii, et al. "Structure-Phase Transformations in the Course of Solid-State Mechanical Alloying of High-Nitrogen Chromium-Manganese Steels." Metals 11, no. 2 (2021): 301. http://dx.doi.org/10.3390/met11020301.

Full text
Abstract:
The solid-state mechanical alloying (MA) of high-nitrogen chromium-manganese austenite steel—MA in a planetary ball mill, —was studied by methods of Mössbauer spectroscopy and transmission electron microscopy (TEM). In the capacity of a material for the alloying we used mixtures of the binary Fe–Mn and Fe–Cr alloys with the nitrides CrN (Cr2N) and Mn2N. It is shown that ball milling of the mixtures has led to the occurrence of the α → γ transitions being accompanied by the (i) formation of the solid solutions supersaturated with nitrogen and by (ii) their decomposition with the formation of se
APA, Harvard, Vancouver, ISO, and other styles
8

Slepnev, A. G. "Evaluating the mechanical properties of grain-boundary phases in nano- and submicrocrystalline materials using a model of an elastic multilayer periodic medium." Technical Physics Letters 33, no. 11 (2007): 936–38. http://dx.doi.org/10.1134/s1063785007110132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lutsenko, E. V., O. V. Sobol, A. A. Podtelezhnikov, and A. I. Zubkov. "FEATURES OF STRENGTHENING OF NANO- AND SUBMICROCRYSTALLINE Al-Fe CONDENSATES." Tambov University Reports. Series: Natural and Technical Sciences 21, no. 3 (2016): 1124–26. http://dx.doi.org/10.20310/1810-0198-2016-21-3-1124-1126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Aleshin, A. N., Alex M. Arsenkin, and Sergey V. Dobatkin. "Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron." Materials Science Forum 550 (July 2007): 465–70. http://dx.doi.org/10.4028/www.scientific.net/msf.550.465.

Full text
Abstract:
The paper is devoted to the problem of thermal stability of ultra-fine grained (submicrocrystalline) materials prepared by severe plastic deformation. A basis of the paper lies in a fact that there is practically no grain growth in submicrocrystalline materials when annealing temperature is less than 0.35Tm. Reasons of high thermal stability of submicrocrystalline materials at low temperatures are widely discussed in literature. One of them is the affect of triple junction drag on grain boundaries motion. During annealing at a low temperature triple junction drag controls microstructure evolut
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nano- and submicrocrystalline materials"

1

Panin, V. E. "Fracture Mechanisms of Nano- and Submicrocrystalline Materials under Various Loading Conditions." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35259.

Full text
Abstract:
The paper provides a review of research results obtained by the author and colleagues in studying the fracture mechanisms of nano- and submicrocrystalline materials under various loading conditions. Fracture of material is considered in the context of Gibbs’ principles of nonequilibrium thermodynamics and is treated as its local structural phase decay. Nucleation of cracks is associated with initiation of micropores in high-curvature zones and their develop-ment proceeds by nonlinear wave mechanisms of opening mode cracking, dynamic rotations, and sliding or tearing mode cracking. When you are
APA, Harvard, Vancouver, ISO, and other styles
2

Yurkova, A. I., and A. V. Byakova. "Mechanical Properties of Nano- and Submicrocrystalline Iron Subjected to Severe Plastic Deformation by Friction." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35149.

Full text
Abstract:
By using nanoindentation technique relationship between microstructure and mechanical parameters such as nanohardness Hh, plasticity characteristic A, and Young’s modulus E were found to be dependent on the grain size of the -Fe subjected to severe plastic deformation by friction (SPDF) with argon atmosphere. Unlike fcc-metals in which the decreasing of grain size to 20 nm results in hardness growth accompanied by decreasing the plasticity, it was found the reverse effect in bcc-Fe, i.e. decreasing the grain size from 50 to 20 nm caused the decrease of hardness and increase of plasticity.
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Eric Chun Yeung. "Nano dispersed materials." Thesis, University of Manchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488774.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Xiao, Lei. "Nano-electrode materials for electroanalysis." Thesis, University of Oxford, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.526413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Samouhos, Stephen V. (Stephen Vincent) 1982. "Nano-materials for novel magneto-rheological liquids and nano-fluids." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40889.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.<br>Includes bibliographical references (p. 56-60).<br>Introduction: Nanotechnology, in its many forms, has evolved as a forefront of the global scientific and technological frontier. Materials once disregarded as very small dust or particulate impurities twenty years ago, are today, the focus of intensely popularized investigation. New materials have been synthesized via nanometer precision engineering, and their resulting properties continue to defy the thermal, electrical, and mechanical limitations
APA, Harvard, Vancouver, ISO, and other styles
6

Eder, Katja Daniela. "Surfaces and interfaces in nano-scale and nano-structured materials." Thesis, The University of Sydney, 2017. http://hdl.handle.net/2123/17217.

Full text
Abstract:
In this thesis, advanced characterisation methods, including atom probe tomography (APT) and transmission Kikuchi diffraction (TKD) were employed to study surface and interfaces in a range of nano-scale and nano-structured materials. These techniques were used to measure solute segregation towards grain boundaries and to explore the relationship between grain boundary segregation and grain boundary mobility. APT was also used to characterise the structure of nanoparticles used as catalysts, and the adsorption behaviour of sulphur on catalytic surfaces, to gain more information about the struct
APA, Harvard, Vancouver, ISO, and other styles
7

Yu, Kai Man Kerry. "Towards nano-engineering of catalyst materials." Thesis, University of Reading, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

King, Simon G. "Novel electrospinning techniques with nano-materials." Thesis, University of Surrey, 2015. http://epubs.surrey.ac.uk/807338/.

Full text
Abstract:
Modern society is ever in demand for higher performing materials, with increased efficiency. Recognising this need, the work discussed here details the steps taken to develop and engineer a cost-effective manufacturing process, which could be easily commercially scalable for the production of large-areas of aligned carbon nanotubes. These aligned carbon nanotubes can then be directly applied in areas such as advanced ‘multi-functional’ composites. Of the available routes, the electrospinning technique demonstrated to be one of extreme promise towards achieving this goal. This thesis guides and
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, H. S. "Study of morphology of colloidal nano-materials." Thesis, University of Cambridge, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.597561.

Full text
Abstract:
This study is an investigation of the morphology of nano-materials synthesized from colloidal solutions, by the generalized sol-gel process but specifically via 3 modes solution-sol, sol-gel, and solution-gel methods. In the solution-via sol study, magic closed-shell CdSe nanocrystals (NCs) are synthesized and shown that the crystal growth has a discontinuous event, explaining by the hypothesized “chemical potential well”. Based on the chemical potential well model, nanocrystals with a controllable multi-modal size distribution, for example, nanocrystals with 2.2 nm ± 9% and 3.6 nm ± 9% in a s
APA, Harvard, Vancouver, ISO, and other styles
10

Mohamed, Rozita. "Preparation of nano-structured macro-porous materials." Thesis, University of Newcastle upon Tyne, 2011. http://hdl.handle.net/10443/1317.

Full text
Abstract:
This research reveals a catalyst development towards achieving catalysts with hierarchical porous structures with enhanced mechanical properties by using nano-structured macro-porous PolyHIPE polymer. This work can be divided into two parts: the fabrication and its characterisation of hierarchical metal structure using PHP and other fibre materials; and the fabrication and characterisation of PHP with silica particles and glass wool, further coated with silane material as templates. A catalyst system was successfully fabricated forming a 3D-interconnecting network of pore size, ranging from te
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Nano- and submicrocrystalline materials"

1

Viswanathan, B. Nano materials. Alpha Science International, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bhattacharya, Shantanu, Avinash Kumar Agarwal, T. Rajagopalan, and Vinay K. Patel, eds. Nano-Energetic Materials. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3269-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Wing Kam, Eduard G. Karpov, and Harold S. Park. Nano Mechanics and Materials. John Wiley & Sons, Ltd, 2006. http://dx.doi.org/10.1002/0470034106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, W. K. Nano Mechanics and Materials. John Wiley & Sons, Ltd., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nano, Science and Technology Consortium (Noida India). Nano materials: Concepts and fundamentals. Nano Science & Technology Consortium, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Saka, Masumi, ed. Metallic Micro and Nano Materials. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-15411-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Champion, Yannik, and Hans-Jörg Fecht, eds. Nano-Architectured and Nanostructured Materials. Wiley-VCH Verlag GmbH & Co. KGaA, 2004. http://dx.doi.org/10.1002/3527606017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Said, Zafar, and Adarsh Kumar Pandey, eds. Nano Enhanced Phase Change Materials. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5475-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

1966-, Kawata Satoshi, Ohtsu Motoichi, and Irie Masahiro, eds. Nano-optics. Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

T, Lau Alan K., Hussain Farzana, and Lafdi Khalid, eds. Nano- and biocomposites. CRC Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Nano- and submicrocrystalline materials"

1

Markushev, M. V., and M. Yu Murashkin. "Strength of Submicrocrystalline Severely Deformed Commercial Aluminum Alloys." In Ultrafine Grained Materials II. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118804537.ch43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aleshin, A. N., Alex M. Arsenkin, and Sergey Dobatkin. "Study of Grain Growth Kinetics in Submicrocrystalline Armco-Iron." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-434-0.465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Zhaochun. "Nano Materials." In Material Modeling in Finite Element Analysis, 2nd ed. CRC Press, 2023. http://dx.doi.org/10.1201/9781003436317-27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Riaboshtan, Valentyn, Anatoly Zubkov, Maria Zhadko, and Tatyana Protasenko. "Dispersion Hardening of Nano- and Submicrocrystalline Vacuum Cu-Mo Condensates." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-91327-4_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kolobov, Yu R., K. V. Ivanov, G. P. Grabovetskaya, and E. V. Naidenkin. "Diffusion-Controlled Processes and Plasticity of Submicrocrystalline Materials." In Nanomaterials by Severe Plastic Deformation. Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527602461.ch13d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yoda, Minami, Jean-Luc Garden, Olivier Bourgeois, et al. "Nano-twinned Materials." In Encyclopedia of Nanotechnology. Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100577.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Inoue, Mitsuteru, Alexander Khanikaev, and Alexander Baryshev. "Nano-Magnetophotonics." In Nanoscale Magnetic Materials and Applications. Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-85600-1_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sullivan, Timothy, James Chapman, and Fiona Regan. "Characterisation of Nano-antimicrobial Materials." In Nano-Antimicrobials. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24428-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Haseeb, A. S. M. A. "Nano-/Microcomposites by Electrodeposition." In Composite Materials. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49514-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Hua, Meng Wu, and Ayusman Sen. "Silver Nanoparticle Antimicrobials and Related Materials." In Nano-Antimicrobials. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24428-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nano- and submicrocrystalline materials"

1

Verma, Prabhat, Takayuki Umakoshi, and Hiroshi Arata. "Plasmon nanofocusing for nano-sensing and nano-optical switching." In Plasmonics: Design, Materials, Fabrication, Characterization, and Applications XXII, edited by Yu-Jung Lu and Takuo Tanaka. SPIE, 2024. http://dx.doi.org/10.1117/12.3028046.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kuznetsov, Pavel V., Andrey M. Lider, Yuriy S. Bordulev, et al. "Positron annihilation spectroscopy of vacancy type defects in submicrocrystalline copper under annealing." In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Author(s), 2016. http://dx.doi.org/10.1063/1.4966419.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Panin, V., P. Kuznetsov, Yu Pochivalov, I. Belyaeva, T. Rakhmatulina, and D. Shumakova. "The formation of gradient submicrocrystalline structure at nickel surface layers under ultrasonic impact treatment." In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dayananthan, C., and R. Manikandan. "Nano composite materials." In International Conference on Nanoscience, Engineering and Technology (ICONSET 2011). IEEE, 2011. http://dx.doi.org/10.1109/iconset.2011.6167927.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kuznetsov, P., T. Rakhmatulina, A. Koznikov, and I. Belyaeva. "Distribution functions for internal interface energy as a characteristic of submicrocrystalline copper structure evolution under low-temperature annealing." In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932807.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bakach, G. P., E. F. Dudarev, T. Yu Maletkina, and A. B. Skosyrskii. "Structural-scale levels of development of inelastic martensitic deformation during isothermal loading of submicrocrystalline titanium nickelide in premartensitic condition." In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932705.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koyama. "Nano-aperture plasmonic VCSELS." In Related Materials (IPRM). IEEE, 2008. http://dx.doi.org/10.1109/iciprm.2008.4703045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ren, Z. F. "Nano Materials and Physics." In ASME 4th Integrated Nanosystems Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/nano2005-87045.

Full text
Abstract:
Aligning carbon nanotubes in any way desired is very important for many fundamental and applied research projects. In this talk, I will first discuss how to grow them with controlled diameter, length, spacing, and periodicity using catalyst prepared by magnetron sputtering, electron beam (e-beam) lithography, electrochemical deposition, and nanosphere self-assembly. Then I will present our results of field emission property of both the aligned carbon nanotubes grown on flat substrates and random carbon nanotubes grown on carbon cloth. For the aligned carbon nanotubes arrays, I will present the
APA, Harvard, Vancouver, ISO, and other styles
9

Ishida, Shutaro, Kota Sudo, and Keiji Sasaki. "Nano-particle manipulation using a plasmonic multimer nano-structure." In Optical Manipulation and Structured Materials Conference, edited by Takashige Omatsu. SPIE, 2018. http://dx.doi.org/10.1117/12.2319334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Harris, James. "New Optoelectronic Materials." In 2007 International Nano-Optoelectronics Workshop. IEEE, 2007. http://dx.doi.org/10.1109/inow.2007.4302863.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nano- and submicrocrystalline materials"

1

Barrera, J., D. C. Smith, and D. J. Devlin. Nano-scale materials. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/555226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kriven, Waltraud M. Instrumentation for Nano-porous, Nano-particulate Geopolymeric Materials Research. Defense Technical Information Center, 2008. http://dx.doi.org/10.21236/ada580696.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kriven, Waltraud M. Instrumentation for Nano-porous, Nano-particulate Geopolymeric Materials Research. Defense Technical Information Center, 2008. http://dx.doi.org/10.21236/ada589783.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Allara, David, Dana Dlott, Tim Eden, et al. Nano Engineered Energetic Materials (NEEM). Defense Technical Information Center, 2011. http://dx.doi.org/10.21236/ada544673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Strouse, Geoffrey F. Assembling Nano-Materials by Bio-Scaffolding: Crystal Engineering in Nano-Electronics. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada393942.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Qi. Hydrodynamics of Macromolecular and Nano-Composite Materials. Defense Technical Information Center, 2005. http://dx.doi.org/10.21236/ada437262.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yakobson, Boris I. Optimization of Nano-Carbon Materials for Hydrogen Sorption. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1089160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cox, James V., Shengfeng Cheng, Gary Stephen Grest, et al. Nanomanufacturing : nano-structured materials made layer-by-layer. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1038208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Martin, C. R., M. J. Tierney, I. F. Cheng, et al. Nano- and Microstructures in Chemistry, Electrochemistry, and Materials Science. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada206296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bogart, Katherine Huderle Andersen. Nano-scale optical and electrical probes of materials and processes. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/909620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nano- and submicrocrystalline materials' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography