Log in

Relevant bibliographies by topics / Nano-machining / Journal articles

To see the other types of publications on this topic, follow the link: Nano-machining.

Journal articles on the topic 'Nano-machining'

Author: Grafiati

Published: 4 June 2021

Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Nano-machining.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

WASHIZU, Masao. "Nano-technology for Molecular Machining." Journal of the Society of Mechanical Engineers 105, no. 1006 (2002): 606–7. http://dx.doi.org/10.1299/jsmemag.105.1006_606.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hosaka, Sumio. "Nano-Machining and Data Storage." IEEJ Transactions on Sensors and Micromachines 120, no. 1 (2000): 1–7. http://dx.doi.org/10.1541/ieejsmas.120.1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Islam, Sumaiya, Raafat N. Ibrahim, and Raj Das. "Study of Abrasive Wear Mechanism through Nano Machining." Key Engineering Materials 462-463 (January 2011): 931–36. http://dx.doi.org/10.4028/www.scientific.net/kem.462-463.931.

Full text

Abstract:

The objective of this paper is to understand the abrasive wear mechanism for producing a nano scale groove on a bulk material through nano machining. A nano indenter equipped with a nano scratching attachment was used for nano machining operation and in situ observation of the machined surfaces. Two different tools (Berkovich and Conical) with the same tip radius (100nm) but different edge geometries were used to machine both Copper and Nickel coatings. It was found that the percentage of elastic recovery was lower for Cu than Ni during this nano machining operations. Hence, the deformation me

APA, Harvard, Vancouver, ISO, and other styles

4

YOSHIOKA, Hayato, Takuhiro HAYAKAWA, and Hidenori SHINNO. "Analysis on Nano-machinability in Ultraprecision Machining of Brittle Materials(Analytical advancement of machining process)." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2005.3 (2005): 1133–38. http://dx.doi.org/10.1299/jsmelem.2005.3.1133.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Liu, Yi Zhi, Ying Chun Liang, and Fei Hu Zhang. "Machining Characteristics Analysis of Nano Ceramics in Ultra Precision Grinding Machining." Key Engineering Materials 304-305 (February 2006): 210–13. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.210.

Full text

Abstract:

According to the composition of nano ceramics, the paper firstly analyses mechanism of^nano ceramics materials surface machining in ultra precision grinding processes and gives a new critical grinding depth formulation. Then many grinding experiments have been done between the nano ceramics and the common ceramics in the same grinding parameters and grinding methods. Atomic force microscopy (AFM) images show that nano ceramics have outstanding machining performance. Its grinding processes is plastic material cutting like metal cutting, and nicks are clear and brittleness desquamated pits exist

APA, Harvard, Vancouver, ISO, and other styles

6

Rasheed, Bassam G., and Mohammed A. Ibrahem. "Laser micro/nano machining of silicon." Micron 140 (January 2021): 102958. http://dx.doi.org/10.1016/j.micron.2020.102958.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

HORIUCHI, Osamu, Daisuke INOKO, Junichi IKENO, and Hirofumi SUZUKI. "Nano-abrasion Machining of Brittle Materials." Proceedings of The Manufacturing & Machine Tool Conference 2000.2 (2000): 97–98. http://dx.doi.org/10.1299/jsmemmt.2000.2.97.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

James, Sagil, Lauren Blake, and Murali M. Sundaram. "Modeling and Experimental Verification of Nano Positioning System for Nanomanufacturing." International Journal of Manufacturing, Materials, and Mechanical Engineering 3, no. 4 (2013): 1–13. http://dx.doi.org/10.4018/ijmmme.2013100101.

Full text

Abstract:

Vibration Assisted Nano Impact-machining by Loose Abrasives (VANILA) is a novel nanomachining process that combines the principles of vibration-assisted abrasive machining and tip-based nanomachining has been developed by the authors to perform target specific nano abrasive machining of hard and brittle materials. One of the critical factors in achieving nanoscale precision during the VANILA process is to maintain an optimal machining gap between the tool and the workpiece surface. Piezoelectric crystal based positioning systems is a proven method for achieving ultraprecision control, however

APA, Harvard, Vancouver, ISO, and other styles

9

Rahman, Mustafizur, A. B. M. A. Asad, T. Masaki, Yoke San Wong, and A. Senthil Kumar. "Compound Micro/Nano Machining – A Tool-Based Innovative and Integrated Approach." Key Engineering Materials 447-448 (September 2010): 9–15. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.9.

Full text

Abstract:

Compound micro-machining is the most promising technology for the production of miniaturized parts and this technology is becoming more and more important and popular because of growing demand for industrial products with not only increased number of functions but also of reduced dimensions, higher dimensional accuracy and better surface finish. In this paper, the development efforts in micro/nano-machining based on solid tools (tool-based micro/nano-machining) in NUS are introduced. In order to achieve meaningful implementation of micro-machining techniques, this research seeks to address fou

APA, Harvard, Vancouver, ISO, and other styles

10

Sankar, M., A. Gnanavelbabu, K. Rajkumar, and M. Mariyappan. "Electro Chemical Machining of Aluminum-Boron Carbide-Nanographite Composites." Applied Mechanics and Materials 852 (September 2016): 136–41. http://dx.doi.org/10.4028/www.scientific.net/amm.852.136.

Full text

Abstract:

Non-traditional machining process had made possible the machining of hard to cut materials. Among several non-traditional processes electrochemical machining has been given attention since there occurs no burrs or tool wear. Composites with nano reinforcements had outclassed their counterparts in terms of the properties shown by the nano composites. In the present work aluminium matrix has been reinforced with boron carbide and nano graphite which is added as a solid lubricant to improve tribological properties. The composite is subjected to electrochemical machining with a view of optimizing

APA, Harvard, Vancouver, ISO, and other styles

11

Yang, Liangliang, Jiangtao Wei, Zhe Ma, et al. "The Fabrication of Micro/Nano Structures by Laser Machining." Nanomaterials 9, no. 12 (2019): 1789. http://dx.doi.org/10.3390/nano9121789.

Full text

Abstract:

Micro/nano structures have unique optical, electrical, magnetic, and thermal properties. Studies on the preparation of micro/nano structures are of considerable research value and broad development prospects. Several micro/nano structure preparation techniques have already been developed, such as photolithography, electron beam lithography, focused ion beam techniques, nanoimprint techniques. However, the available geometries directly implemented by those means are limited to the 2D mode. Laser machining, a new technology for micro/nano structural preparation, has received great attention in r

APA, Harvard, Vancouver, ISO, and other styles

12

Yin, Ming. "Nano-Machining Polishing Method on Metal Materials." Applied Mechanics and Materials 214 (November 2012): 455–59. http://dx.doi.org/10.4028/www.scientific.net/amm.214.455.

Full text

Abstract:

Ice desk can realize the polishing on the metal material. Ice desk polishing can decrease the surface. Ice desk polishing can get ideal polishing result on LY12 aluminum alloy, which is nonferrous metal and unsuitable for traditional grinding and polishing. Under micro-loading or zero-loading, when the two faces are in sliding friction and the interval of boundary interface decreases to the degree that molecular force can make its function, the main reason removing the metal surface materials is lattice relaxing, structure splitting, surface energy and adherence energy in the interface. Crysta

APA, Harvard, Vancouver, ISO, and other styles

13

Zhan, Dongping, Lianhuan Han, Jie Zhang, Quanfeng He, Zhao-Wu Tian, and Zhong-Qun Tian. "Electrochemical micro/nano-machining: principles and practices." Chemical Society Reviews 46, no. 5 (2017): 1526–44. http://dx.doi.org/10.1039/c6cs00735j.

Full text

Abstract:

Micro/nano-machining (MNM) is becoming the cutting-edge of high-tech manufacturing because of the ever increasing industrial demands for super smooth surfaces and functional three-dimensional micro/nano-structures in miniaturized and integrate devices, and electrochemistry plays an irreplaceable role in MNM.

APA, Harvard, Vancouver, ISO, and other styles

14

Li, Jun, Biao Li, Zhanggui Hu, Yongwei Zhu, and Dunwen Zuo. "Optimization of FAP in Nano Machining Process." Integrated Ferroelectrics 152, no. 1 (2014): 43–50. http://dx.doi.org/10.1080/10584587.2014.901787.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Packard, William E., Young Liang, Ning Dai, et al. "Nano-machining of gold and semiconductor surfaces." Journal of Microscopy 152, no. 3 (1988): 715–25. http://dx.doi.org/10.1111/j.1365-2818.1988.tb01442.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Amano, Akira. "Nano-Level Surface Machining for Molding Die." Seikei-Kakou 21, no. 4 (2009): 172–77. http://dx.doi.org/10.4325/seikeikakou.21.172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Patole, Pralhad B., Vivek V. Kulkarni, and Sudhir G. Bhatwadekar. "MQL Machining with nano fluid: a review." Manufacturing Review 8 (2021): 13. http://dx.doi.org/10.1051/mfreview/2021011.

Full text

Abstract:

In any metal cutting machining operation, the cutting fluid plays important role by cooling the cutting tool and the surface of the work piece, also chips are removed from heat affected zone. However, misuse of the cutting fluid and wrong methods of its disposal can affect human health and the environment badly. This paper presents a review of the important research papers published regarding the MQL-based application of mineral oils, vegetable oils and nano fluid-based cutting fluids for different machining processes, such as, drilling, turning, milling and grinding, etc. Most of the experime

APA, Harvard, Vancouver, ISO, and other styles

18

Sun, Jialin, Zhifu Huang, Jun Zhao, and Ke Yan. "Nano-laminated graphene-carbide for green machining." Journal of Cleaner Production 293 (April 2021): 126158. http://dx.doi.org/10.1016/j.jclepro.2021.126158.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Gao, Wei, Robert J. Hocken, John A. Patten, and John Lovingood. "Experiments Using a Nano-Machining Instrument for Nano-Cutting Brittle Materials." CIRP Annals 49, no. 1 (2000): 439–42. http://dx.doi.org/10.1016/s0007-8506(07)62984-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Phaneuf, Michael W. "Applications (Fun and Practical) of FIB Nano-Deposition and Nano-Machining." Microscopy and Microanalysis 8, S02 (2002): 568–69. http://dx.doi.org/10.1017/s1431927602105514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Okokpujie, Imhade Princess, and Lagouge Kwanda Tartibu. "Performance Investigation of the Effects of Nano-Additive-Lubricants with Cutting Parameters on Material Removal Rate of AL8112 Alloy for Advanced Manufacturing Application." Sustainability 13, no. 15 (2021): 8406. http://dx.doi.org/10.3390/su13158406.

Full text

Abstract:

The implementation of nano-additives in machining fluid is significant for manufacturers to attain a sustainable manufacturing process. The material removal rate (MRR) is a significant process of transforming solid raw materials into specific shapes and sizes. This process has many challenges due to friction, vibration, chip discontinuity when machining aluminum alloy, which has led to poor accuracy and affected the fatigue life of the developed material. It is worth noting that aluminum 8112 alloy is currently being applied in most engineering applications due to its lightweight-to-strength r

APA, Harvard, Vancouver, ISO, and other styles

22

PADHY, Chinmaya, and Pariniti SINGH. "Effects of the Tribological Behaviour of h-BN MQL Nano Cutting Fluid (NCF-MQL) on Turning Inconel 625." INCAS BULLETIN 11, no. 4 (2019): 107–21. http://dx.doi.org/10.13111/2066-8201.2019.11.4.10.

Full text

Abstract:

Minimum quantity lubrication (MQL) is currently a widely used lubricating technique during machining, in which minimum amount of lubricant in the form of mist is delivered to the machining interface, thus helps to reduce the negative effects caused to the environment and human health. Further, to enhance the productivity of machining process specifically for hard-to-cut materials, nano cutting fluid (suitably mixed nano materials with conventional cutting fluid) is used as an alternative method to conventional lubrication (wet) in MQL. In this study, h-BN nano cutting fluid was formulated with

APA, Harvard, Vancouver, ISO, and other styles

23

Saotome, Yasunori, Suguru Okaniwa, Hisamichi Kimura, and Akihisa Inoue. "Superplastic Nanoforging of Pt-Based Metallic Glass with Dies of Zr-BMG and Glassy Carbon Fabricated by Focused Ion Beam." Materials Science Forum 539-543 (March 2007): 2088–93. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.2088.

Full text

Abstract:

This paper introduces a technique for fabricating nano-structures through super plastic nano-forging of metallic glass using nano-scale dies that are fabricated by a focused-ion beam (FIB). FIB-machining characteristics of glassy carbon and Zr-based metallic glass have been studied and are useful for fabricating nano-scale dies because of the isotropic homogeneity of their amorphous structures. We used the dies to nano-forge Pt48.75Pd9.75Cu19.5P22 metallic glass. The thin foil specimens were heated in a small furnace and compressively loaded in a small vacuum chamber. Dies, a die-forged 1μm-di

APA, Harvard, Vancouver, ISO, and other styles

24

INAGAKI, Kiyonori, Noboru MORITA, Kiwamu ASHIDA, and Jyunji SAITO. "Study for Development of Nano-Machining and Measurement System of Machining Center Type." Journal of the Japan Society for Precision Engineering 74, no. 11 (2008): 1176–81. http://dx.doi.org/10.2493/jjspe.74.1176.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Pal, Amrit, and Hazoor Singh Sidhu. "Application of Eco-Friendly Cutting Fluids Through Small Quantity Lubrication Technique: A Study." Asian Journal of Engineering and Applied Technology 7, no. 2 (2018): 116–20. http://dx.doi.org/10.51983/ajeat-2018.7.2.904.

Full text

Abstract:

Owing to environmental concerns and growing regulations over contamination and pollution, the demand for renewable and biodegradable cutting fluids is rising. The aim of this paper is to review the eco-friendly and user-friendly minimum quantity lubrication (MQL) technique using vegetable-based oil and solid lubricant in different machining processes. It has been reported in various literature that the minimum quantity lubrication (MQL) method using vegetable oil-based cutting fluid shows superior performance as compared to dry and wet machining. The major benefits of MQL are reduction of cons

APA, Harvard, Vancouver, ISO, and other styles

26

Rajmohan, T., S. D. Sathishkumar, K. Palanikumar, and S. Ranganathan. "Modeling and Analysis of Cutting Force in Turning of AISI 316L Stainless Steel (SS) under Nano Cutting Environment." Applied Mechanics and Materials 766-767 (June 2015): 949–55. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.949.

Full text

Abstract:

Nano Cutting fluids play a significant role in machining operations and impact shop productivity, tool life and quality of work. In the present work, machining performance of AISI 316L Stainless steel (SS) is assessed under nano cutting environment. Experiments are performed by plain turning of 80mm diameter and 300mm long rod of AISI 316L SS on NAGMAT centre lathe under wet machining with and without Multi Wall Carbon nano Tubes (MWCNT) inclusions in the conventional lubricant. The Second order quadratic models were developed to predict cutting forces using response surface methodology (RSM)

APA, Harvard, Vancouver, ISO, and other styles

27

Zhan, Jian Ming, and Di Zheng. "Research on the Hydrodynamic Electro-Chemical Mechanical Polishing for Silicon Wafer with Suspension Fluid." Key Engineering Materials 359-360 (November 2007): 290–94. http://dx.doi.org/10.4028/www.scientific.net/kem.359-360.290.

Full text

Abstract:

Silicon wafer is one of the key materials of LSI and SLSI and has been widely used in the electronic industries and IT products. In the new century of nano times, silicon wafer needs higher geometry accuracy, lower surface roughness and higher precision machining effecency, but no disfigurement in its surface layer. Nowadays, non-contact polishing still seems to be most efficient method to achieve nano-scale geometry accuracy and maintain surface roughness in the nanometer level even for silicon wafer, but it is still not easier to control its machining course and to obtain well-pleasing machi

APA, Harvard, Vancouver, ISO, and other styles

28

Vahdati, Mehrdad, and Ali Shokuhfar. "Design of Moving Components of an Ultra Precision Machine Tool for Nanometric Machining." Materials Science Forum 553 (August 2007): 232–38. http://dx.doi.org/10.4028/www.scientific.net/msf.553.232.

Full text

Abstract:

Ultra precision machines are used for very precise machining as well as small parts. Due to their application, the accuracy of products has been upgraded in recent years. Thus, dimensional accuracies could be compared with surface texture dimensions like roughness and etc. In order to attain dimensions with surface texture accuracy, usually micro/nano meter, it is necessary to adopt ordinary machining technologies with micro/nano techniques. This measuring by adoption leads to nano-machining. Nano-machining researches deal with all three basic components of, machine tools, work piece, and cutt

APA, Harvard, Vancouver, ISO, and other styles

29

Yang, Li Jun, Bai Cheng, and Yang Wang. "Experimental Research on Nanostructure Fabricated by AFM Probe Combining with a CW Laser." Key Engineering Materials 645-646 (May 2015): 1054–58. http://dx.doi.org/10.4028/www.scientific.net/kem.645-646.1054.

Full text

Abstract:

Although the nanostructure machining by AFM probe assisted with laser has gain a great progress, few studies has been done on the optical fiber probe guiding the continuous laser to irradiate on AFM probe to machining nanostructure. Using this technology to create nanodot and nano-groove was presented in this paper. The law of how the experiment parameters influenced the results was summarized in the paper. The scale of nanodot is about 450nm, and nano-groove is about 40nm. When the fabrication is completed, the wear of the AFM probe was observed by SEM and drew a conclusion. In the method of

APA, Harvard, Vancouver, ISO, and other styles

30

Fan, Yi Hua, Ching En Chen, Wen Wei Fan, and Hung Wen Liao. "Development of a Nanoscale Micro-Machining Machine." Applied Mechanics and Materials 284-287 (January 2013): 707–12. http://dx.doi.org/10.4028/www.scientific.net/amm.284-287.707.

Full text

Abstract:

This paper proposes a novel nano-scale micro-machining machine based on the pantograph mechanism. It is designed to satisfy the need for achieving high accuracy and process efficiency in the manufacture of increasingly small industrial products. The target platform is mounted on a pantograph and small x-y sliders, and is driven by a traditional X-Y platform with common precision. The theoretical and simulation results indicate that the proposed method is feasible for development of a micro-machining machine capable of achieving nano-level precision. In addition, test results indicate that the

APA, Harvard, Vancouver, ISO, and other styles

31

Maruo, Shoji. "Micro/nano machining based on two-photon microstereolithography." Review of Laser Engineering 34, Supplement (2006): 105–6. http://dx.doi.org/10.2184/lsj.34.105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hegab, H., B. Darras, and H. A. Kishawy. "Sustainability Assessment of Machining with Nano-Cutting Fluids." Procedia Manufacturing 26 (2018): 245–54. http://dx.doi.org/10.1016/j.promfg.2018.07.033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Lee, Jeong Min, Young Bin Kim, and Jeong Woo Park. "Pulse Electrochemical Meso/Micro/Nano Ultraprecision Machining Technology." Journal of Nanoscience and Nanotechnology 13, no. 11 (2013): 7741–44. http://dx.doi.org/10.1166/jnn.2013.7716.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Lee, Jeong Min, Young Bin Kim, and Jeong Woo Park. "Pulse Electrochemical Meso/Micro/Nano Ultraprecision Machining Technology." Journal of Nanoscience and Nanotechnology 14, no. 5 (2014): 4006. http://dx.doi.org/10.1166/jnn.2014.9210.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

MATSUSHITA, Yukio, Hayato YOSHIOKA, Hitoshi HASHIZUME, and Hidenori SHINNO. "454 Nano-machining Using a Tool with Microsensor." Proceedings of Yamanashi District Conference 2005 (2005): 113–14. http://dx.doi.org/10.1299/jsmeyamanashi.2005.113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Fujimori, Kenta, Yousuke Yoshihara, Hirotaka Ojima, Libo Zhou, and Hiroshi Eda. "307 Resarch on Micro/Nano Machining in Vacuum." Proceedings of Ibaraki District Conference 2006 (2006): 71–72. http://dx.doi.org/10.1299/jsmeibaraki.2006.71.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

KURIYAGAWA, Tsunemoto, and Hirofumi HIDAI. "Committee for Nano—Precision Mechanical Machining & Manufacturing." Journal of the Japan Society for Precision Engineering 76, no. 10 (2010): 1097–100. http://dx.doi.org/10.2493/jjspe.76.1097.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Li, Jun, Longlong Song, Jiandong Huang, Yongkai Tang, Yongwei Zhu, and Dunwen Zuo. "Effect of alkaline slurries on nano machining CaF2crystal." Integrated Ferroelectrics 171, no. 1 (2016): 169–77. http://dx.doi.org/10.1080/10584587.2016.1174915.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Osuga, Tomohiro, Haruki Obara, Yuu Tomita, Noboru Morita, and Tohru Sasaki. "533 Study of tool positioning for nano-machining." Proceedings of the Materials and processing conference 2009.17 (2009): _533–1_—_533–2_. http://dx.doi.org/10.1299/jsmemp.2009.17._533-1_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Doshi, Sachindra J., P. K. Jain, and N. K. Mehta. "Prospective applications of nano fluid during machining process." International Journal of Machining and Machinability of Materials 14, no. 3 (2013): 257. http://dx.doi.org/10.1504/ijmmm.2013.056365.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Park, S. S., M. G. Mostofa, C. I. Park, M. Mehrpouya, and S. Kim. "Vibration assisted nano mechanical machining using AFM probe." CIRP Annals 63, no. 1 (2014): 537–40. http://dx.doi.org/10.1016/j.cirp.2014.03.138.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Gao, Shang, and Han Huang. "Recent advances in micro- and nano-machining technologies." Frontiers of Mechanical Engineering 12, no. 1 (2017): 18–32. http://dx.doi.org/10.1007/s11465-017-0410-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Kulkarni, Sanket S., Yaowei Yong, Malgorzata J. Rys, and Shuting Lei. "Machining assessment of nano-crystalline hydroxyapatite bio-ceramic." Journal of Manufacturing Processes 15, no. 4 (2013): 666–72. http://dx.doi.org/10.1016/j.jmapro.2013.09.007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Yoshioka, Hayato, and Hidenori Shinno. "Design Concept and Structural Configuration of Advanced Nano-Pattern Generator with Large Work Area “ANGEL”." International Journal of Automation Technology 5, no. 1 (2011): 38–44. http://dx.doi.org/10.20965/ijat.2011.p0038.

Full text

Abstract:

Industrial demands for ultra-precision machining have rapidly increased in a wide range of industries, e.g., aerospace, semiconductors, optics, molds, etc. In particular, various structured surfaces with micro- and nano-sized patterns have recently been required for advanced science and engineering fields. In order to rationally meet such requirements, it is indispensable to develop an ultra-precision machine tool with both nanometer-level machining accuracy and a large machining area. In this paper, therefore, the design concept and structural configuration of a desirable ultra-precision mach

APA, Harvard, Vancouver, ISO, and other styles

45

Shwetha, K., V. Deepa, S. Prasanna Kumar, K. Santhosh Kumar, and Meduri Ravi. "Porous Pellets of Tungsten Nano Powder: Investigation of Surface Porosity of Machined Surfaces." Advanced Science Letters 24, no. 8 (2018): 5527–31. http://dx.doi.org/10.1166/asl.2018.12142.

Full text

Abstract:

The pressed dispenser cathodes are showing problem in machining due to their less strength because of low sintering temperature. In this paper, the synthesis of Nano tungsten powders and the fabrication of machinable porous Nano tungsten matrices were discussed. The Nano tungsten powders were synthesized by two different routes. One is by using Ammonium Meta Tungstate in sol gel technique and other is dissolving micron sized tungsten particles in Hydrogen Peroxide (H2O2). Using these synthesized Nano powders, the pellets were fabricated and the results were compared with the pellet made of com

APA, Harvard, Vancouver, ISO, and other styles

46

Gao, Bin, Jing Hua Zhu, and Wen Chang Lang. "Structural Analysis for an Ultra-Precision Machine Slide by FEM Based on Applied Mechanics." Advanced Materials Research 496 (March 2012): 321–24. http://dx.doi.org/10.4028/www.scientific.net/amr.496.321.

Full text

Abstract:

Micro/nano machining becomes more and more important and popular. Ultra-precision machines are the fundamentals. Aiming at design and developing an ultra-precision machine tool for micro/nano machining, the slide, one of the most important part of the machine has been analyzed by FEM. The software Abaqus has been used for the analysis. Based on the full load created by the coils and permanent magnet of the linear motors, the kinetics characteristics have been analyzed. According to the analytical results, the slide structure has been optimized to fulfill the requirements of the developed micro

APA, Harvard, Vancouver, ISO, and other styles

47

PRIHANDANA, Gunawan Setia, M. MAHARDIKA, Sambo SAR, M. HAMDI, Y. S. WONG та Kimiyuki MITSUI. "E32 Workpiece vibration aided nano-graphite powder suspended dielectric fluid in micro-electrical discharge machining (μ-EDM) processes(Electrical machining)". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 819–24. http://dx.doi.org/10.1299/jsmelem.2009.5.819.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Rahman, M. Azizur, Mustafizur Rahman, and A. Senthil Kumar. "Material perspective on the evolution of micro- and nano-scale cutting of metal alloys." Journal of Micromanufacturing 1, no. 2 (2018): 97–114. http://dx.doi.org/10.1177/2516598418782318.

Full text

Abstract:

Microfabrication plays an active role in miniaturization of products and components in various emerging fields ranging from pharmaceuticals and bio-medical applications to electro-mechanical sensors and actuators to chemical microreactors and mechanical microturbines. Tool-based machining is one of the key technologies of microfabrication. The machining of materials on the micrometre and nanometre scales is fundamental for the fabrication of 3D micro components. However, there are limitations of scaling down the mechanical machining process from the macro- to micro- to nanoscales. Several fact

APA, Harvard, Vancouver, ISO, and other styles

49

Jahan, Muhammad P., Kamlakar P. Rajurkar, and Ajay P. Malshe. "A Comparative Study on Machining Capabilities of Wet and Dry Nano-scale Electro-machining." Procedia CIRP 42 (2016): 155–60. http://dx.doi.org/10.1016/j.procir.2016.02.211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Shyha, Islam, Guo Yu Fu, De Hong Huo, et al. "Micro-Machining of Nano-Polymer Composites Reinforced with Graphene and Nano-Clay Fillers." Key Engineering Materials 786 (October 2018): 197–205. http://dx.doi.org/10.4028/www.scientific.net/kem.786.197.

Full text

Abstract:

Following a comprehensive review of nanocomposite materials and their machinability, this paper details experimental results from the micro-slotting of two different nanocomposites reinforced with graphene platelets and nanoclay fillers as opposed to their base material matrix. The evaluation includes the quality of machined surfaces characterised by SEM, cutting forces monitored using force dynamometry, and surface roughness measured using both contact and non-contact techniques. The evaluation included four filler percentages by weight between 0.1 and 1% in addition to 0% with the plain matr

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!