To see the other types of publications on this topic, follow the link: Nanocomposite coating structure.

Journal articles on the topic 'Nanocomposite coating structure'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Nanocomposite coating structure.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Zhu, Yanrong, Sandeep Kottarath, Jude O. Iroh, and Richard A. Vaia. "Progressive Intercalation and Exfoliation of Clay in Polyaniline–Montmorillonite Clay Nanocomposites and Implication to Nanocomposite Impedance." Energies 15, no. 15 (2022): 5366. http://dx.doi.org/10.3390/en15155366.

Full text
Abstract:
Conducting polymers, such as polyaniline (PANi) and polypyrrole (PPy), and their nanocomposites, are desired in a wide range of applications, including supercapacitors, lithium ion battery, chemical sensors, biosensors, barrier thin films, and coatings, because of their interesting electrical and electrochemical properties. It is well known that the properties of polymer nanocomposites depend on their chemical structure, as well as their microstructure, yet scientists and engineers have not fully understood how to properly control the structure of polymer nanocomposites. In this study, it is s
APA, Harvard, Vancouver, ISO, and other styles
2

Kadhim, Hala M. "Microstructure Study and Morphology of Ni / Nano Al2O3 Composite Coating Synthesied by Electroless Plating." Diyala Journal of Engineering Sciences 14, no. 3 (2021): 1–7. http://dx.doi.org/10.24237/djes.2021.14301.

Full text
Abstract:
The electroless deposition method was used to prepare Ni-based nanocomposite coatings, this approach represents an alternate way of having coatings on the different substrates. Most of the previous literatures on this subject and work deals with a study the effect of the process conditions and, Bath composition on the microstructure at the macroscale of Ni-Al2O3 composite coatings. Though, effect on the step structure of the composition of the bath and microstructure are little, the present work aims to study the effect of hard ceramic Al2O3 nanoparticles at different concentrations (0.0, 0.5,
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, Chun, Xiang Xuan Liu, and Xuan Jun Wang. "A Novel Low Infrared Emissivity Material by Ni-P-CB Electroless Nanocomposite." Advanced Materials Research 79-82 (August 2009): 521–24. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.521.

Full text
Abstract:
Ni-P-CB nanocomposite coatings were successfully deposited on the ABS plastic matrix by electroless plating. Scanning electronic microscopy (SEM) and X-ray diffraction (XRD) spectrometer were used to examine surface morphology and structure of the as-plated coating. Energy dispersive spectroscopy (EDS) is adopted to obtain the component analysis of the Ni-P-CB composite coating, and the infrared emissivity of coatings were investigated by IRE-I Infrared Emissometer. The SEM and XRD results indicated that the nanoparticles were dispersed homogeneously in Ni-P coating. The result of EDS shows th
APA, Harvard, Vancouver, ISO, and other styles
4

Algailani, Hiba M., Adel K. Mahmoud, and Hanaa A. Al-Kaisy. "Fabrication of Ni-ZrO2 Nanocomposite Coating by Electroless Deposition Technique." Engineering and Technology Journal 38, no. 5A (2020): 649–55. http://dx.doi.org/10.30684/etj.v38i5a.491.

Full text
Abstract:
This work aims preparation of Ni-based nanocomposite coating by electroless deposition method onto stainless steel (316L) substrate, the present work will compare the effects of incorporation of ZrO2 nanoparticles at different percentages (1.25 wt %, 2.25 wt %, and 4.25 wt %) Ni-based electroless deposition coating of the bath nanocomposite on the phase structure, microhardness, and corrosion resistance is studied. Where the structure and chemical composition of nanocomposite coatings were studied by using (X-ray), (SEM) and (EDS). of Ni - ZrO2 nanocomposite coating exhibits much-increased mic
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Yuxin, Bo Hu, See Leng Tay, Fengyan Hou, Wei Gao, and Weiwei Chen. "The microstructure and mechanical properties of Ni–Co–ZrO2 nanocomposite coatings." International Journal of Modern Physics B 31, no. 16-19 (2017): 1744022. http://dx.doi.org/10.1142/s0217979217440222.

Full text
Abstract:
Ni–Co–ZrO2 nanocomposite coatings have been electroplated on mild steel by adding ZrO2 nanoparticles into an Ni–Co plating solution. The microstructure and mechanical properties of nanocomposite coatings were systematically investigated. The results show that the microhardness of Ni–Co–ZrO2 nanocomposite coatings varied significantly with the quantity of ZrO2 nanoparticles. Ni–Co–10 g/L ZrO2 nanocomposite coating exhibited the optimum mechanical properties due to the dispersion strengthening effect. Addition of ZrO2 nanoparticles beyond 10 g/L led to particle agglomeration and caused a porous
APA, Harvard, Vancouver, ISO, and other styles
6

Yusrini, Marita, and Yaacob Iskandar Idris. "Dispersion of Strengthening Particles on the Nickel-Iron-Silicon Nitride Nanocomposite Coating." Advanced Materials Research 647 (January 2013): 705–10. http://dx.doi.org/10.4028/www.scientific.net/amr.647.705.

Full text
Abstract:
Nickel-iron-silicon nitride nanocomposite coatings were prepared by electrodeposition technique. The deposition was performed at current density of 11.5 A dm-2. Nano-size silicon nitride was mixed in the electrolyte bath as dispersed phase. The effects of silicon nitride nanoparticulates in the nickel-iron nanocomposite coating were investigated in relation to the concentration of silicon nitride in the plating bath. X-ray diffraction (XRD) analysis showed that the deposited nickel iron alloy coating has face-centered cubic structure (FCC). However, a mixture of body-centered cubic (BCC) and f
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Huiying, Xiang Li, Wenjie Qian, et al. "Characterization of mechanical properties of epoxy/nanohybrid composites by nanoindentation." Nanotechnology Reviews 9, no. 1 (2020): 28–40. http://dx.doi.org/10.1515/ntrev-2020-0003.

Full text
Abstract:
AbstractThe carbon nanofibers and molybdenum disulfide (CNF-MoS2) nanohybrid material was fabricated and incorporated into epoxy resin to form the nanocomposite coating. Firstly, microstructure observation shows that each CNF was uniformly wrapped up with MoS2 nanosheets, and the nanohybrids were well dispersed in the coating. Then, nanoindentation experiments were carried out to explore the effect of the CNF-MoS2 nanohybrids on the mechanical properties of the epoxy resin coating. The results demonstrate that elastic modulus, hardness and creep deformation resistance of the CNF-MoS2 epoxy res
APA, Harvard, Vancouver, ISO, and other styles
8

Xue, Yu Jun, Chen Shen, Ji Shun Li, Hang Li, and Dong Hong Si. "Corrosion Resistance of Ni-Y2O3 Composite Coating Prepared by Electrodeposition under Ultrasonic Condition." Advanced Materials Research 97-101 (March 2010): 1235–38. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1235.

Full text
Abstract:
Ni-Y2O3 nanocomposite coating was electrodeposited from a nickel sulfamate solution containing Y2O3 particles and ultrasonic was applied during the process of the electrodeposition. The surface morphology and microstructure of the composite coatings were analyzed by a scanning electronic microscope (SEM) and a high-resolution transmission electron microscope (HRTEM). The corrosion resistence of the coatings was evaluated in the solution of 10 wt.% HCl aqueous solution. The results indicate that the Ni-Y2O3 nanocomposite coating shows a refined crystal grain and improved corrosion resistance co
APA, Harvard, Vancouver, ISO, and other styles
9

Borowski, Jacek, Tomasz Rybak, Mikhail Ignatiev, Hanna Wiśniewska-Weinert, Igor Dobrovnik, and Volf Leshchynsky. "Nanocomposite PVD Coatings Applied to Cold Plastic Forming Tools." Materials Science Forum 674 (February 2011): 105–12. http://dx.doi.org/10.4028/www.scientific.net/msf.674.105.

Full text
Abstract:
Cold forging tools most often fail as a result of wearing down surface layer which works with forming part. Deposition of a hard coating on the working surface is widely applied to increase tool durability. In this respect technologies of production of top layers with the use of nanocomposite materials provide great opportunities of modification of tribological properties. This paper presents results of metallographic, SEM and HRTEM analysis of PVD nanocomposite coatings [1] (nACVIc, TiCN-CBC and TiCN-NP-MOVIC). The tribological tests with ball on disc (T10) tester and industrial tests of forg
APA, Harvard, Vancouver, ISO, and other styles
10

Tian, Ya Fang, Xian Hui Li, Zheng Hong Ao, and Yu Jun Xue. "Corrosion Resistance of Ni-ZrO2 Nanocomposite Coating Prepared by Pulse Electrodeposition with Rotating Cathode in an Ultrasonic Field." Applied Mechanics and Materials 278-280 (January 2013): 422–25. http://dx.doi.org/10.4028/www.scientific.net/amm.278-280.422.

Full text
Abstract:
The Ni- ZrO2 nanocomposite coatings were prepared by pulse electrodeposition with rotating cathode in an ultrasonic field, and the corrosion resistance of the coatings were studied in 5% H2SO4. The surface morphologies of composite coatings after corrosion were analyzed by scanning electron microscope (SEM). And corrosion rate was tested using an electronic balance. The results shows that, compared with pure Ni coating, pulse current composite coating and pulse current composite coating with ultrasound, the Ni-ZrO2 nanocomposite coating prepared by pulse electrodeposition with rotating cathode
APA, Harvard, Vancouver, ISO, and other styles
11

Fominski V.Yu., Demin M.V., Fominski D.V., Gritskevich M.D., and Goikhman A.Yu. "Mechanism of tribo-induced structure modification for nanocomposite Mo-S-C-H thin film coatings." Technical Physics Letters 48, no. 11 (2022): 37. http://dx.doi.org/10.21883/tpl.2022.11.54887.19263.

Full text
Abstract:
Comparative studies of the tribological properties of solid lubricant coatings of three main types (MoS2, a-C(H)) and Mo-S-C-H in an inert gas medium have been carried out. It has been established that the coefficient of friction for the Mo-S-C-H nanocomposite coating is somewhat higher than for the other two. And its wear resistance is comparable to a-C(H) and higher than that of MoS2. The friction coefficient of the Mo-S-C-H coating was determined by the nature of tribo-induced surface modification. It included the formation of a nanofilm with a thickness of 6 nm and layered atomic packing c
APA, Harvard, Vancouver, ISO, and other styles
12

Tan, Haifeng, Chunlin He, Jie Yang, et al. "Preparation and Properties of (Cu, Ni) Co-Doped ZnO Nanoparticle-Reinforced Cu-Ni Nanocomposite Coatings." Materials 16, no. 7 (2023): 2746. http://dx.doi.org/10.3390/ma16072746.

Full text
Abstract:
Here, 2% Cu + 2% Ni co-doped ZnO nanoparticles were synthesized using the hydrothermal method and were used as particle reinforcements of Cu-Ni nanocomposite coatings prepared by electroplating technology. The effects of the added (Cu, Ni) co-doped ZnO nanoparticles (2–8 g/L) on the phase structure, surface morphology, thickness, microhardness, corrosion resistance, and photocatalytic properties of the coatings were investigated. The nanocomposite coatings have obvious diffraction peaks on the crystal planes of (111), (200), and (220), showing a wurtzite structure. The surface of the nanocompo
APA, Harvard, Vancouver, ISO, and other styles
13

He, Zhen, Shengping Zhang, Li Yin, Muhammed D. Hayat, and Peng Cao. "Cu–TiO2 nanocomposite coatings prepared from sol-enhanced electrodeposition." International Journal of Modern Physics B 34, no. 01n03 (2019): 2040038. http://dx.doi.org/10.1142/s021797922040038x.

Full text
Abstract:
A series of [Formula: see text]-modified Cu coatings were developed via a sol-enhanced electrodeposition process. The effect of [Formula: see text] sol on the properties of fabricated [Formula: see text] nanocomposites is studied. Phase composition and microstructures of [Formula: see text] deposits were characterized using X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). Mechanical properties of the fabricated [Formula: see text] coatings were also examined. The proper addition of [Formula: see text] sol gives rise to refined coating surface w
APA, Harvard, Vancouver, ISO, and other styles
14

Zhang, Weihui, Di Cao, Yanxin Qiao, Yuxin Wang, Xiang Li, and Wei Gao. "Preparation and properties of duplex NI-P-TIO2/NI nanocomposite coatings." International Journal of Modern Physics B 33, no. 01n03 (2019): 1940019. http://dx.doi.org/10.1142/s0217979219400198.

Full text
Abstract:
Duplex Ni-P-TiO2/Ni coatings were deposited on the brass substrate by using two baths. Ni-P-TiO2 nanocomposite coatings were electroplated as the outer layer on the Ni-plated brass substrate by adding transparent TiO2 sol (0–50 mL/L) into the Ni-P plating solution. The microstructure, mechanical property and corrosion resistance of the duplex Ni-P-TiO2/Ni nanocomposite coatings were systemically investigated. The results show that the interface of duplex coating was uniform and the adhesion between two layers was extremely good. The microhardness of duplex Ni-P-12.5 mL/L TiO2 /Ni coating was [
APA, Harvard, Vancouver, ISO, and other styles
15

Alam, Manawwer, Naser M. Alandis, Naushad Ahmad, Fahmina Zafar, Aslam Khan, and Mohammad Asif Alam. "Development of Hydrophobic, Anticorrosive, Nanocomposite Polymeric Coatings from Canola Oil: A Sustainable Resource." Polymers 12, no. 12 (2020): 2886. http://dx.doi.org/10.3390/polym12122886.

Full text
Abstract:
A novel hydrophobic Canola oil-based nanocomposite anticorrosive coating material with different contents of fumes silica (FS) was successfully synthesized via an in situ method. Firstly, a Canola oil-based hydroxyl terminated poly (oxalate-amide) was prepared by a two-step process of amidation and condensation. Secondly, the dispersion of fumed silica (1 to 3 wt.%) in hydroxyl terminated poly (oxalate-amide) was carried out, followed by reaction with toluene-2,4- diisocyanate (TDI) in order to form poly (urethane-oxalate-amide)/fumed silica nanocomposite. The structure and properties of nanoc
APA, Harvard, Vancouver, ISO, and other styles
16

Zhang, Shengping. "Preparation and Properties of Sn-TiO2 nanocomposite coatings." MATEC Web of Conferences 358 (2022): 01056. http://dx.doi.org/10.1051/matecconf/202235801056.

Full text
Abstract:
Sn-TiO2 nanocomposite coatings were prepared by sol-gel enhanced electrodeposition technique and the effect of c concentration on the performance of the composite coatings was investigated by adding different volumes of TiO2 sol to the electrolyte. The microscopic morphology and corrosion resistance of the coatings were characterized by XRD tests, SEM tests, hardness tests and a series of electrochemical tests. From the test results, it was found that the coating had the highest hardness value and the best corrosion resistance when the TiO2 sol was added at 15 mL/L; however, when the TiO2 sol
APA, Harvard, Vancouver, ISO, and other styles
17

Park, B. J., J. H. Sung, J. H. Park, J. S. Choi, and H. J. Choi. "Poly(vinyl acetate)/Clay Nanocomposite Materials for Organic Thin Film Transistor Application." Journal of Nanoscience and Nanotechnology 8, no. 5 (2008): 2676–79. http://dx.doi.org/10.1166/jnn.2008.18299.

Full text
Abstract:
Nanocomposite materials of poly(vinyl acetate) (PVAc) and organoclay were fabricated, in order to be utilized as dielectric materials of the organic thin film transistor (OTFT). Spin coating condition of the nanocomposite solution was examined considering shear viscosity of the composite materials dissolved in chloroform. Intercalated structure of the PVAc/clay nanocomposites was characterized using both wide-angle X-ray diffraction and TEM. Fracture morphology of the composite film on silicon wafer was also observed by SEM. Dielectric constant (4.15) of the nanocomposite materials shows that
APA, Harvard, Vancouver, ISO, and other styles
18

Tey, Eydar, Mansor Hashim, and Ismayadi Ismail. "Characterization of Cu-Al2O3 and Ni-Al2O3 Nanocomposites Electrodeposited on Copper Substrate." Materials Science Forum 846 (March 2016): 471–78. http://dx.doi.org/10.4028/www.scientific.net/msf.846.471.

Full text
Abstract:
In the present work, it was attempted to electrodeposit Cu-Al2O3 and Ni-Al2O3 metal matrix composite (MMC) coatings onto a copper substrate using a modified Watts bath containing dispersed nanosized Al2O3 with an average particle size of 50 nm. The prepared nanocomposite coatings were subjected to different tests to characterize their surface morphology, crystalline structure and mechanical properties. The microstructure and composition of the composite films were studied with Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) techniques. The use of nanoparticles could change the m
APA, Harvard, Vancouver, ISO, and other styles
19

Sapsaliou, D. V., G. B. Melnikova, T. N. Tolstaya, and S. A. Chizhik. "Thin composite coatings based on gelatin with inorganic nanoparticles." Proceedings of the National Academy of Sciences of Belarus, Chemical Series 58, no. 3 (2022): 325–33. http://dx.doi.org/10.29235/1561-8331-2022-58-3-325-333.

Full text
Abstract:
A technique for the formation of gelatin thin films and composite coatings with silicon dioxide and zinc oxide nanoparticles by spin coating has been developed. New data of the morphology and structural characteristics of the formed gelatin and nanocomposite films were obtained by atomic force microscopy. The dependences of the roughness parameters of composite coatings on the content of silicon dioxide and zinc oxide nanoparticles in the polymer matrix are presented. It has been shown that the introduction of inorganic nanoparticles into the gelatin structure makes it possible to form nanocom
APA, Harvard, Vancouver, ISO, and other styles
20

Dudek, Karolina, Mateusz Dulski, Jacek Podwórny, Magdalena Kujawa, and Patrycja Rawicka. "Mechanism of Ag-SiO2-TiO2 Nanocomposite Coating Formation on NiTi Substrate for Enhanced Functionalization." Coatings 14, no. 8 (2024): 1055. http://dx.doi.org/10.3390/coatings14081055.

Full text
Abstract:
The functionality of the NiTi shape memory alloy was improved through engineering Ag-SiO2-TiO2 nanocomposite coatings. For this purpose, an anaphoretic deposition process, conducted at a constant voltage of 40 V and deposition times ranging from 1 to 10 min, was used. Scanning electron microscopy (SEM) analysis demonstrated that the deposition parameters significantly impacted the morphology of the coatings. Complementary Raman Spectroscopy and X-ray diffraction (XRD) analyses confirmed the successful formation of distinct nanocomposite layers, and revealed the details of their crystalline str
APA, Harvard, Vancouver, ISO, and other styles
21

Tian, Jun, and Zi Qiong Shi. "PVD Preparation Process of (TiN + CrN) / CrAlN Superhard Nanocomposite Multilayer Coatings." Advanced Materials Research 568 (September 2012): 368–71. http://dx.doi.org/10.4028/www.scientific.net/amr.568.368.

Full text
Abstract:
In this study, multi-source multi-target evaporation-sputtering PVD technology to prepare (TiN + CrN) / CrAlN nanocomposite multilayers, accurate modulation of the composition and structure of the coating can effectively reduce the stress in the coating in order to achieve (TiN + CrN) / CrAlN nano-composite multilayer dielectric films optimized design, to reach a good overall performance. (TiN + CrN) / CrAlN superhard nanocomposite multilayer coatings on the surface of tools and molds with carbide and high-speed tool steel materials, followed by the TiN film; (TiN + CrN) film, in the TiN relat
APA, Harvard, Vancouver, ISO, and other styles
22

Sergeev, Vyacheslav A., Sergey V. Vasin, and Mikhail S. Efimov. "Flexible humidity and temperature sensor based on film structures of polymer nanocomposites with carbon nanotubes." Radioelectronics. Nanosystems. Information Technologies. 15, no. 1 (2023): 13–20. http://dx.doi.org/10.17725/rensit.2023.15.013.

Full text
Abstract:
A brief review of humidity and temperature sensors based on film structures of nanocomposite materials is presented. The possibilities and prospects of sorption-impedance humidity sensors and resistive temperature sensors based on polymer nanocomposites with carbon fillers are considered. The studies results of the electrical conductivity dependences of nanocomposite films based on polyvinyl alcohol with magnetically sensitive multi-walled carbon nanotubes on humidity and temperature are presented. The structure and electrical circuit of a flexible two-parameter humidity and temperature sensor
APA, Harvard, Vancouver, ISO, and other styles
23

Abuovа, R. Zh, А. Bondarev, and G. А. Burshukova. "Enhanced damping properties of novel Cr-Ni-V steels with ceramical-metal nanostucture TiN-Cu coatings." Engineering Journal of Satbayev University 146, no. 1 (2024): 7–14. https://doi.org/10.51301/ejsu.2024.i1.02.

Full text
Abstract:
The paper investigates novel steel compositions, alloyed with Cr, Ni, and V, exhibiting improved damping properties. Additionally, it proposes a surface coating method to further enhance damping capabilities. Furthermore, the study presents findings on structure and phase formation processes in (TiN)-Cu coatings, deposited via vacuum-arc deposition on EO5 steels substrates. The coating fracture exhibits signs of ductile fracture, accompanied by the formation of fibrous-banded pits on the fracture surface. Scratch tests reveal shear stresses are presumed to be the primary cause of delamination.
APA, Harvard, Vancouver, ISO, and other styles
24

Cao, D. M., J. C. Jiang, B. Feng, and W. J. Meng. "Microstructure of TiC/Amorphous Hydrocarbon Nanocomposite Coatings." Microscopy and Microanalysis 6, S2 (2000): 440–41. http://dx.doi.org/10.1017/s1431927600034693.

Full text
Abstract:
Application of an appropriate ceramic surface coating to mechanical components such as bearings and gears can provide longer life and increased performance reliability. Metal-containing hydrocarbon (Me-C:H) coatings possess high hardness, together with low friction and low wear rate. They have also been suggested to adhere better to metallic substrates. This combination of attractive mechanical/tribological properties makes Me-C:H coatings potentially useful for surface modification of a wide range of mechanical components.Using the technique of inductively coupled plasma (ICP) assisted vapor
APA, Harvard, Vancouver, ISO, and other styles
25

Daniel, J., P. Souček, K. Bernátová, et al. "Investigation of the Influence of Ni Doping on the Structure and Hardness of Ti-Ni-C Coatings." Journal of Nanomaterials 2017 (2017): 1–13. http://dx.doi.org/10.1155/2017/6368927.

Full text
Abstract:
Nanocomposite nc-TiC/a-C:H thin films exhibit unique combination of mechanical properties, high hardness, low friction, and wear. Selective doping by weak-carbide forming element can be used in order to specifically design the physical and chemical properties of nc-TiC/a-C:H coatings. In this paper we report on an effect of nickel addition on structure and hardness of the nc-TiC/a-C:H coatings. The effect of Ni alloying on the coating structure under conditions of DCMS and HiPIMS depositions was studied. The coating structure was correlated with the coating hardness. The grain size, the grain
APA, Harvard, Vancouver, ISO, and other styles
26

Wang, Hong Tao, Ruo Yu Wang, Xiao Chen, Xiao Bo Bai, Zeng Xiang Dong, and Gang Chang Ji. "Characterization of Cold-Sprayed FeAl/WC Nanocomposite Coating." Applied Mechanics and Materials 423-426 (September 2013): 63–66. http://dx.doi.org/10.4028/www.scientific.net/amm.423-426.63.

Full text
Abstract:
A FeAl/WC nanocomposite coating was produced by cold spraying of mechanically alloyed Fe/Al/WC composite powder assisted with annealing treatment. The microstructure and grain size of FeAl/WC nanocomposite coating before and after annealing treatment were characterized. The results indicated that as-sprayed Fe (Al)/WC nanocomposite coating presented a dense microstructure with lamellar structure. The phase transformation from Fe (Al) solid solution to FeAl intermetallics within as-sprayed nanocomposite coating occurred when annealed at 550°C for 25 h. The annealed nanocomposite coating was com
APA, Harvard, Vancouver, ISO, and other styles
27

Kızılkaya, Pınar, and Mükerrem Kaya. "Chitosan/TiO2/Rosmarinic Acid Bio-Nanocomposite Coatings: Characterization and Preparation." Journal of Composites Science 9, no. 1 (2024): 2. https://doi.org/10.3390/jcs9010002.

Full text
Abstract:
This study aimed to develop and characterize bio-nanocomposite coatings by incorporating titanium nanoparticles (TiO2 NPs) (30–50 nm) (10 mg/L), which have antimicrobial effects, and rosmarinic acid (RA) (0.005 mg/mL), which has strong antioxidant and antimicrobial activities, into the chitosan matrix using the solvent casting method. The prepared bio-nanocomposite coatings were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM-EDX), and atomic force microscopy (AFM). In the XRD analysis, the crystal structure of the
APA, Harvard, Vancouver, ISO, and other styles
28

Xiang, Yanxiong, Lingling Huang, and Changwei Zou. "Effects of Bias Voltages on the Structural, Mechanical and Oxidation Resistance Properties of Cr–Si–N Nanocomposite Coatings." Coatings 10, no. 8 (2020): 796. http://dx.doi.org/10.3390/coatings10080796.

Full text
Abstract:
Cr–Si–N nanocomposite coatings were deposited by multi-arc ion plating under different bias voltages. The influences of bias voltage on composition, microstructure, surface morphology and mechanical properties of Cr–Si–N nanocomposite coatings were investigated in detail. The HR-TEM, XRD, and XPS results confirmed the formation of nanocomposite structure of nanocrystalline of CrN embedded into the amorphous phase of Si3N4. The particle radius of CrN can be calculated from the half-width of the diffraction peak of CrN (200) and the value was about 20–60 nm. In addition, no diffraction peaks of
APA, Harvard, Vancouver, ISO, and other styles
29

Ge, Min, Jianbo Zhu, Rui Zhang, and Chongyang Wang. "Current status of hard coating research." Journal of Computing and Electronic Information Management 10, no. 1 (2023): 68–71. http://dx.doi.org/10.54097/jceim.v10i1.5754.

Full text
Abstract:
The emergence of hard coatings has improved tool productivity and service life and reduced machining costs while ensuring machining quality. In order to meet the development needs of difficult-to-machine materials and cutting processes, coating materials have been continuously developed and updated in terms of composition and structure, and the composition has developed from simple binary coatings (such as CrN, TiN) and ternary coatings (such as AlCrN, TiAlN, TiC) to multi-coatings, nanocomposite coatings and high-entropy alloy coatings, and the structure has changed from single-layer to multi
APA, Harvard, Vancouver, ISO, and other styles
30

Hosseini, Seyed Hossein, and Ahmad Asadnia. "Synthesis, Characterization, and Microwave-Absorbing Properties of Polypyrrole/MnFe2O4Nanocomposite." Journal of Nanomaterials 2012 (2012): 1–6. http://dx.doi.org/10.1155/2012/198973.

Full text
Abstract:
Conductive polypyrrole (PPy)-manganese ferrite (MnFe2O4) nanocomposites with core-shell structure were synthesized by in situ polymerization in the presence of dodecyl benzene sulfonic acid (DBSA) as the surfactant and dopant and iron chloride (FeCl3) as the oxidant. The structure and magnetic properties of manganese ferrite nanoparticles were measured by using powder X-ray diffraction (XRD) and vibrating sample magnetometer (VSM), respectively. Its morphology, microstructure, and DC conductivity of the nanocomposite were characterized by scanning electron microscopy (SEM), Fourier transform i
APA, Harvard, Vancouver, ISO, and other styles
31

Vu, Van T. H., Thanh T. M. Dinh, Nam T. Pham, Thom T. Nguyen, Phuong T. Nguyen, and Hang T. X. To. "Evaluation of the Corrosion Inhibiting Capacity of Silica/Polypyrrole-Oxalate Nanocomposite in Epoxy Coatings." International Journal of Corrosion 2018 (September 2, 2018): 1–10. http://dx.doi.org/10.1155/2018/6395803.

Full text
Abstract:
Silica/Polypyrrole nanocomposites (SiO2/PPy) incorporating oxalate as counter anion (SiO2/PPyOx) were chemically polymerized in the solution with the presence of pyrrole, silica, and sodium oxalate. Nanocomposites SiO2/PPyOx at different concentrations of oxalate anion were characterized with FTIR, XRD, EDX, TGA, and TEM. The corrosion protective properties for carbon steel of nanocomposites in epoxy coating were studied by electrochemical techniques including electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP). FTIR results of nanocomposites show a slightly red-shift
APA, Harvard, Vancouver, ISO, and other styles
32

Caliskan, Halil, Celil Cagatay Celil, and Peter Panjan. "Effect of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coating on Wear Behavior of Carbide Tools in the Milling of Hardened AISI D2 Steel." Journal of Nano Research 38 (January 2016): 9–17. http://dx.doi.org/10.4028/www.scientific.net/jnanor.38.9.

Full text
Abstract:
Thin hard coatings are widely used in the protection of cutting tools, dies and molds to prolong their wear resistance and lifetime. Superior properties of different coatings can be combined with multilayer design, and especially a higher microhardness can be obtained by nanocomposite structures. In this study, a multilayer design composing of TiAlSiN, TiSiN and TiAlN layers was applied on carbide cutting tools. The top TiAlSiN layer has a nanocomposite structure of crystalline fcc-TiAlN and amorphous Si3N4 phases. The multilayer nanocomposite TiAlSiN/TiSiN/TiAlN coating was deposited on the c
APA, Harvard, Vancouver, ISO, and other styles
33

Chang, Li-Chun, Yu-Heng Liu, and Yung-I. Chen. "Mechanical Properties and Oxidation Behavior of Cr–Si–N Coatings." Coatings 9, no. 8 (2019): 528. http://dx.doi.org/10.3390/coatings9080528.

Full text
Abstract:
Cr–Si–N coatings were prepared through reactive direct current magneton sputtering using a high N2/Ar flow ratio of 1. The addition of Si to improve the mechanical properties and oxidation resistance of Cr–N coatings was examined. The results indicated that the Cr–Si–N coatings with an Si content of <12 at % and an N content of >50 at % exhibited a cubic CrN phase with a columnar structure, whereas the coatings with 14 at % Si comprised of a nanocomposite structure, and the coatings with 16–18 at % Si were near-amorphous. The nanocomposite Cr32Si14N54 coating possessed hardness and Young
APA, Harvard, Vancouver, ISO, and other styles
34

Dziedzic, Andrzej, Dariusz Augustowski, Paweł Kwaśnicki, et al. "Structure and Properties of Silver-Platinum-Titanium Dioxide Nanocomposite Coating." Coatings 15, no. 5 (2025): 587. https://doi.org/10.3390/coatings15050587.

Full text
Abstract:
The aim of this study was to produce a coating for protective glass glued to touch displays with high antibacterial effectiveness. This paper presents the structural, mechanical, optical, and antibacterial properties of a TiO2:Ag–Pt coating prepared by dual reactive DC and RF magnetron sputtering. Characterization techniques used include XRD, TEM with EDS, SEM, AFM, nanoindentation for hardness and Young’s modulus, wettability tests, and optical property analysis. The coating exhibited columnar crystals with a width of 30–50 nm. Crystals of anatase, rutile, silver, and platinum with a size of
APA, Harvard, Vancouver, ISO, and other styles
35

Esquivel, Reynaldo, Iván Canale, Maricela Ramirez, et al. "Poly(N-isopropylacrylamide)-coated gold nanorods mediated by thiolated chitosan layer: thermo-pH responsiveness and optical properties." e-Polymers 18, no. 2 (2018): 163–74. http://dx.doi.org/10.1515/epoly-2017-0135.

Full text
Abstract:
AbstractA core-shell of colloidal metal-responsive polymer provides an innovative model in functional materials. These core-shell nanocomposites offer the possibility to control some properties, such as particle size, surface plasmon resonance and morphology. In this research, we demonstrate the successful synthesis and functionality of gold nanorods (GNR) coated with the polymers chitosan (Ch) and poly(N-isopropylacrylamide) (PNIPAM). The polymer coatings are performed using a two-step method. First, GNR were coated with a thiolated chitosan (GNR-Ch) by replacing hexadecyltrimethylammonium br
APA, Harvard, Vancouver, ISO, and other styles
36

Sapsaliou, D. V., A. S. Petrovskaya, D. L. Radyukevich, T. N. Tolstaya, G. B. Melnikova, and S. A. Chizhik. "Structure and Properties of Multilayer Nanocomposite Coatings of Polyvinyl Alcohol with Aluminum Oxide Nanoparticles." Science & Technique 22, no. 5 (2023): 359–66. http://dx.doi.org/10.21122/2227-1031-2023-22-5-359-366.

Full text
Abstract:
The nanocomposite polymer – inorganic materials formation, the study of their morphology and mechanical properties at the nanolevel is acute in the development of new materials for various functional purposes, including medical ones. As a result of the research the technique for producing singleand multilayer films of polyvinyl alcohol and composite polymer coatings with aluminum oxide nanoparticles by the spin coating method has been developed. It is shown that the optimal mass content of aluminum oxide nanoparticles in suspension for the formation of uniform composite coatings is 0.625 %. Ba
APA, Harvard, Vancouver, ISO, and other styles
37

Al-Bayati, Amna A., and Hanaa Flayeh Ali. "Synthesis, Structural, and Optical Characterization of ZnO/SnO<sub>2 </sub>Nanocomposites Thin Films Prepared by Spin Coating and Pulse Laser Deposition." Iraqi Journal of Physics 23, no. 1 (2025): 68–77. https://doi.org/10.30723/ijp.v23i1.1334.

Full text
Abstract:
ZnO/SnO2 nanocomposite thin films are prepared on glass substrates by spin coating and pulsed laser deposition (PLD) techniques, utilizing various ZnO/SnO2 ratios. The fabricated thin films are exposed to annealing at 300°C to improve their crystallinity. The surface morphology, crystalline structure, and optical properties of the produced ZnO/SnO2 nanocomposite thin films are examined. The FESEM pictures of ZnO and ZnO/SnO2 nanocomposite thin films fabricated via the spin coating process demonstrated an increase in particle size from 11 to 18 nm when the ZnO ratio increased from 50% to 90%. T
APA, Harvard, Vancouver, ISO, and other styles
38

Kim, Soobyn, Ki Won An, Hae Won Yoon, Hyun Jun Park, Kyoung Il Moon, and Caroline Sunyong Lee. "Evaluation of Sputtered Mo–Cu–Cr–N Coatings Prepared at Different N2 Gas Flow Rates Using a Multicomponent Single-Alloy Target." Coatings 12, no. 3 (2022): 371. http://dx.doi.org/10.3390/coatings12030371.

Full text
Abstract:
With the growth of the automobile, machinery, and aerospace industries, demand for high-performance surface coatings having multifunctional characteristics for use in mechanical parts is increasing. In this study, ternary/quaternary Mo–Cu–Cr–(N) nanocomposite coatings were deposited at different N2 gas flow rates using direct current magnetron sputtering from a multicomponent single-alloy target. The use of a single-alloy target simplifies the deposition process and improves the coating uniformity. The influence of the nitrogen content was investigated regarding the microstructural, mechanical
APA, Harvard, Vancouver, ISO, and other styles
39

Ali, Kamran, Sivaprasad Narayana, R. A. Shakoor, et al. "Synthesis and Performance Evaluation of Pulse Electrodeposited Ni-AlN Nanocomposite Coatings." Scanning 2018 (2018): 1–13. http://dx.doi.org/10.1155/2018/7187024.

Full text
Abstract:
This research work presents the microscopic analysis of pulse electrodeposited Ni-AlN nanocomposite coatings using SEM and AFM techniques and their performance evaluation (mechanical and electrochemical) by employing nanoindentation and electrochemical methods. The Ni-AlN nanocomposite coatings were developed by pulse electrodeposition. The nickel matrix was reinforced with various amounts of AlN nanoparticles (3, 6, and 9 g/L) to develop Ni-AlN nanocomposite coatings. The effect of reinforcement concentration on structure, surface morphology, and mechanical and anticorrosion properties was st
APA, Harvard, Vancouver, ISO, and other styles
40

Sharma, R., V. Kumar, and Y. C. Goswami. "Excellent flexible Tin Oxide-metal sulfide nanocomposites grown by spin coating chemical route." Chalcogenide Letters 18, no. 8 (2021): 473–79. http://dx.doi.org/10.15251/cl.2021.188.473.

Full text
Abstract:
Tin oxide /Metal sulfide nanocomposites were synthesized using two step solution route. In the first step SnO2 gel were obtained followed by the next step of addition of precursor of cadmium and sulfide salts. Films were grown on cellulose flexible substrate using spin coating method. All the samples were analyzed using structural, morphological and optical characterizations. In X ray diffractograms, tetragonal rutile structure is observed with shift in peak towards lower angle due to tensile strain. SEM micrographs show that the ring like structure converted into flake like structures. AFM mi
APA, Harvard, Vancouver, ISO, and other styles
41

Tey, Eydar, Zulkarnain Zainal, Lim Kean Pah, and Ismayadi Ismail. "Effect of Mechanical Agitation on Cr-Al2O3 Nanocomposite Coatings Fabricated from Trivalent Chromium Electrodeposition." Solid State Phenomena 317 (May 2021): 506–14. http://dx.doi.org/10.4028/www.scientific.net/ssp.317.506.

Full text
Abstract:
In the present work, Cr-Al2O3 nanocomposite coatings were electrodeposited onto a copper substrate using a modified trivalent chromium electroplating bath with the addition of 80nm Al2O3 powder. The effects of mechanical agitation of electrodeposition bath on Al2O3 particles dispersion and particles embedment were studied. The Cr-Al2O3 nanocomposite samples were subjected to different tests to characterize their surface morphology, crystalline structure, and mechanical properties. The crystalline structure, composition and surface morphology of the deposits were studied by X-ray diffraction (X
APA, Harvard, Vancouver, ISO, and other styles
42

Golgoon, Aboozar, Mahmood Aliofkhazraei, Mansoor Toorani, Mohammad Hossein Moradi, Alireza Sabour Rouhaghdam, and Masoud Asgari. "Corrosion behavior of ZnO-polyester nanocomposite powder coating." Anti-Corrosion Methods and Materials 64, no. 4 (2017): 380–88. http://dx.doi.org/10.1108/acmm-08-2016-1707.

Full text
Abstract:
Purpose The low resistance against penetration of water, oxygen and the other corrosive ions through the paths of coating is one the most important problems. So, protective properties of coating such as polyester must be promoted. Recently, the use of nanoparticles in the matrix of polymer coating to increase their protection and mechanical properties has been prospering greatly. The purpose of this study is to improve the corrosion resistance of the polyester powder coating with ZnO nanoparticles. The ZnO nanoparticles have been synthesized by hydrothermal method in a microwave. Using polyest
APA, Harvard, Vancouver, ISO, and other styles
43

Zulkifli, M. R., Muhammad Zaimi, Jariah Mohamad Juoi, and Zainab Mahamud. "Nanocomposite TiAlBN Coatings as a Corrosion Protection Layer for AZ91 Mg Alloy Substrate in NaCl." Materials Science Forum 819 (June 2015): 109–14. http://dx.doi.org/10.4028/www.scientific.net/msf.819.109.

Full text
Abstract:
Magnesium alloys create increasing interest in structural application where weight reduction is vast concern. However, one of magnesium drawback in various applications is low corrosion resistance. In general, a hard coating can be applied on metal to combat such a problem. AlN and TiN coatings are most widely utilized in manufacturing area i.e for structural application due to its high hardness, high chemical stability, and excellent adhesion to substrates. Most recent, TiAlBN coating catch many attentions due to its superior properties than other most studied hard coating. The incorporation
APA, Harvard, Vancouver, ISO, and other styles
44

Vertlib, Viatcheslav, Marianne Dietiker, Michael Plötze, Lee Yezek, Ralph Spolenak, and Alexander M. Puzrin. "Fast assembly of bio-inspired nanocomposite films." Journal of Materials Research 23, no. 4 (2008): 1026–35. http://dx.doi.org/10.1557/jmr.2008.0147.

Full text
Abstract:
This paper presents a spin-coating layer-by-layer assembly process to prepare multilayered polyelectrolyte-clay nanocomposites. This method allows for the fast production of films with controlled layered structure. The preparation of a 100-bilayer film with a thickness of about 330 nm needs less than 1 h, which is 20 times faster than conventional dip-coating processes maintaining the same hardness and modulus values. For validation of this technique, nanocomposite films with thicknesses up to 0.5 μm have been created with the common dip self-assembly and with the spin coating layer-by-layer a
APA, Harvard, Vancouver, ISO, and other styles
45

Li, Yongfeng, Kun Zhang, Mingming Zhang, et al. "Preparation of Sol-Enhanced Ni–P–Al2O3 Nanocomposite Coating by Electrodeposition." Journal of Nanomaterials 2020 (May 18, 2020): 1–9. http://dx.doi.org/10.1155/2020/5239474.

Full text
Abstract:
A Ni–P–(sol)Al2O3 coating was prepared on the surface of Q235 steel by direct-current electrodeposition. This method was combined with sol-gel and electrodeposition technique, instead of the traditional nanopowder dispersion, to prepare highly dispersible oxide nanoparticle-reinforced composites. The effects of temperature, pH value, and current density and Al2O3 sol on the hardness of composite coating were investigated. The coating surface morphology and structure were characterized by scanning electron microscopy and energy dispersive spectroscopy, respectively. The corrosion resistance of
APA, Harvard, Vancouver, ISO, and other styles
46

Zhan, Feng, Lei Xiong, Fang Liu, and Chenying Li. "Grafting Hyperbranched Polymers onto TiO2 Nanoparticles via Thiol-yne Click Chemistry and Its Effect on the Mechanical, Thermal and Surface Properties of Polyurethane Coating." Materials 12, no. 17 (2019): 2817. http://dx.doi.org/10.3390/ma12172817.

Full text
Abstract:
In this study, we proposed a novel and facile method to modify the surface of TiO2 nanoparticles and investigated the influence of the surface-modified TiO2 nanoparticles as an additive in a polyurethane (PU) coating. The hyperbranched polymers (HBP) were grafted on the surface of TiO2 nanoparticles via the thiol-yne click chemistry to reduce the aggregation of nanoparticles and increase the interaction between TiO2 and polymer matrices. The grafting of HBP on the TiO2 nanoparticles surface was investigated by means of X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier tr
APA, Harvard, Vancouver, ISO, and other styles
47

Yoon, Hae Won, Seung Yong Shin, Se Hun Kwon, and Kyoung Il Moon. "Microstructure and Mechanical Properties of ZrCuSiN Coatings Deposited by a Single Alloy Target." Coatings 10, no. 5 (2020): 435. http://dx.doi.org/10.3390/coatings10050435.

Full text
Abstract:
Recently, research has been conducted on nanocomposite thin films containing new additive elements in ZrN. In this paper, a method for depositing ZrCuSiN nanocomposite coatings using a ZrCuSi single target is presented. The ZrCuSi target that was used to easily deposit a ZrCuSiN coating in a mixed gas atmosphere (Ar + N2) was produced by a simple arc melting method (casting process). The effect of the nitrogen content was investigated by depositing a ZrCuSiN coating using alloy targets at various nitrogen gas flow rates (2, 4, 6, and 8 sccm). X-ray diffraction analysis of the ZrCuSiN coatings
APA, Harvard, Vancouver, ISO, and other styles
48

Nose, Masateru, Tomohiro Watanuki, Tokimasa Kawabata, Yuji Hatano, Kenji Matsuda, and Susumu Ikeno. "Oxidation Resistance and Self Hardening of CrAlN/BN Nanocomposite Coatings." Materials Science Forum 706-709 (January 2012): 2559–64. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.2559.

Full text
Abstract:
CrAlN/BN nanocomposite coatings were deposited on mirror-polished silicon wafer and high-speed steel (HSS) substrates using reactive cosputtering, i.e., pulsed dc and rf sputtering of CrAl and h-BN targets, respectively. Further, the oxidation resistance of the obtained coatings was investigated. The CrAlN/BN coating exhibited superior oxidation resistance properties when compared with those of the CrAlN coatings; after annealing the sample at 800 °C in air for 1 h, the plastic hardness value of the CrAlN coatings decreased to 50% of the as-deposited hardness value; in contrast, the CrAlN/BN c
APA, Harvard, Vancouver, ISO, and other styles
49

Zhao, J. F., Yong Li, and L. Wang. "Nano-SiC Particles Reinforced Plasma Sprayed WC-Co Coating by Laser Melting Process." Key Engineering Materials 315-316 (July 2006): 575–78. http://dx.doi.org/10.4028/www.scientific.net/kem.315-316.575.

Full text
Abstract:
The laser-melting process of SiC nano-particles coated on the plasma sprayed WC-Co coating was performed. The SiC nanocomposite coating was prepared, and the microstructure and the mechanical properties of it were investigated. After laser irradiated, parts of nano SiC particles are turned into the inner of coating with the nano-micro composite structure. The being of SiC nano-particles in coating brings the better fine microstructure and the higher densification. The wear-resistant property and the corrosion-resistant property of the coating with SiC nano-particles are improved more than the
APA, Harvard, Vancouver, ISO, and other styles
50

Chen, Jinsong, Yinhui Huang, Chanzhou Wei, Bin Qiao, Jianming Yang, and Yiqiang He. "A Study on Ni-Al2O3 Nanocomposite Coating Prepared by Jet Electrodeposition." Advanced Composites Letters 19, no. 5 (2010): 096369351001900. http://dx.doi.org/10.1177/096369351001900504.

Full text
Abstract:
Ni-Al2O3 nanocomposite coatings were fabricated by jet electrodeposition process. Effect of concentration of Al2O3 in the electrolyte, current density and electrolyte jet speed on nano-Al2O3 content were analyzed. The composite coatings’ micro structure, energy spectrum was observed under the scanning microscope(SEM). Effect of nano-Al2O3 content on the microhardness and corrosion resistance were evaluated. The results shows that the Ni deposited layers have nanocrystalline micro structure with average size of 50 nm. Al2O3 particles are well dispersed in layer and the particles content is up t
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!