Relevant bibliographies by topics / NC program

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'NC program'

Author: Grafiati
Published: 4 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'NC program.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "NC program"

1

BUT, Adrian. "OPTIMIZATION OF THE NC PROGRAM USING NC BRAIN SOFTWARE." International Conference on Applied Mechanics and Mechanical Engineering 18, no. 18 (April 1, 2018): 1. http://dx.doi.org/10.21608/amme.2018.35002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Davis, Mary V., Christine A. Bevc, and Anna P. Schenck. "Effects of Performance Improvement Programs on Preparedness Capacities." Public Health Reports 129, no. 6_suppl4 (November 2014): 19–27. http://dx.doi.org/10.1177/00333549141296s404.

Full text
Abstract:
Objective. In response to public health systems and services research priorities, we examined the extent to which participation in accreditation and performance improvement programs can be expected to enhance preparedness capacities. Methods. Using data collected by the Local Health Department Preparedness Capacities Assessment Survey, we applied a series of weighted least-squares models to examine the effect of program participation on each of the eight preparedness domain scores. Participation was differentiated across four groups: North Carolina (NC) accredited local health departments (LHDs), NC non-accredited LHDs, national comparison LHDs that participated in performance or preparedness programs, and national comparison LHDs that did not participate in any program. Results. Domain scores varied among the four groups. Statistically significant positive participation effects were observed on six of eight preparedness domains for NC accreditation programs, on seven domains for national comparison group LHDs that participated in performance programs, and on four domains for NC non-accredited LHDs. Conclusions. Overall, accreditation and other performance improvement programs have a significant and positive effect on preparedness capacities. While we found no differences among accredited and non-accredited NC LHDs, this lack of significant difference in preparedness scores among NC LHDs is attributed to NC's robust statewide preparedness program, as well as a likely exposure effect among non-accredited NC LHDs to the accreditation program.
APA, Harvard, Vancouver, ISO, and other styles
3

Fatriyana, Maya. "CNC PROGRAM AND PROGRAMMING OF CNC MACHINE." Journal of Mechanical Science and Engineering 7, no. 1 (October 7, 2020): 019–23. http://dx.doi.org/10.36706/jmse.v7i1.37.

Full text
Abstract:
A programming to make parts are CNC Programming (Computer Numerical Control Programming) for machines. An NC program consists of a sequence of instructions that control the motion and automatic sequences of an NC Machine to perform a particular processing task. In a general sense, the term NC programming refers to the creation of control data for machining workpieces on NC and CNC machines. NC programming has a decisive influence on the cost-effectiveness and profitability of NC manufacturing. The selection of a programming system is mostly guided by the need for software that is suitable for the application at hand, readily available, and as universally applicable as possible.
APA, Harvard, Vancouver, ISO, and other styles
4

Cai, Hui Lin, Zong Gang Li, and En En Ren. "A Scheduling Algorithms of DNC Systems Based on CAN and Program Expending Rate." Applied Mechanics and Materials 37-38 (November 2010): 46–49. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.46.

Full text
Abstract:
In order to avoid communication conflicts in DNC systems, the scheduling tactics adopting a modified guaranteed EDF algorithm to DNC systems’ numerical control (NC) programs transmission was proposed. A condition was given to guarantee all NC machines in DNC systems work continuously. A mathematic model based on the actual expending rate of NC program was established to decide the priority of NC program transformation of all NC machines. A constraint condition for two machines with neighbored priority was proposed to avoid the conflict in the scheduling times. A dynamic scheduling scheme was presented for DNC systems. The validity of the presented method is verified by the practical tests.
APA, Harvard, Vancouver, ISO, and other styles
5

Poore, M. H., A. D. Shaeffer, and B. Blinson. "025 NC Cattle Industry Assessment Program." Journal of Animal Science 94, suppl_1 (February 1, 2016): 12–13. http://dx.doi.org/10.2527/ssasas2015-025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Ri Liang, Xian Zhi Zhang, and Cheng Rui Zhang. "Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs." Applied Mechanics and Materials 16-19 (October 2009): 1015–19. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.1015.

Full text
Abstract:
Over the last decade a new data interface for CAM/CNC integration has been established to replace ISO 6983. The new standard, ISO 14649 (STEP-NC), provides a comprehensive data model that describes both geometrical and technological information in an object-oriented way. In order to bridge the gap between such rich-information programs and the legacy CNC systems, this paper presents a framework for manipulating the manufacturing data in STEP-NC part programs. The proposed system provides a basic platform for STEP-NC program interpretation, geometry visualization, micro-process planning and program re-generation. Major issues relating to the realization of manufacturing information extraction and shop-floor-level process planning are addressed in particular, and a prototype for STEP-NC turning process is implemented to demonstrate the feasibility of the approach.
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Xiu Sheng, Cheng Rui Zhang, Qiang Wang, and Ri Liang Liu. "Study on the Simulation System Based on STEP-NC." Advanced Materials Research 129-131 (August 2010): 748–52. http://dx.doi.org/10.4028/www.scientific.net/amr.129-131.748.

Full text
Abstract:
This paper presents a simulation system based on STEP-NC that can verify STEP-NC program and demonstrate the running of STEP-NC system (CNC system based on STEP-NC). NC Programs used in the STEP-NC system are in XML format. The overall architecture of the system which consists of feature extraction module, graphical modeling module, movement modeling module, feature library, simulation drive module and user interface is established. Some key technologies to implement simulation system are discussed in details. The simulation system shows great potential to the development and popularization of STEP-NC system.
APA, Harvard, Vancouver, ISO, and other styles
8

Bukhari, Bukhari. "Otomatisi pembangkit program nc berdasarkan gambar input autocad 2d untuk machining centre mc-520." Jurnal POLIMESIN 1, no. 1 (September 16, 2019): 10. http://dx.doi.org/10.30811/jop.v1i1.1391.

Full text
Abstract:
Part program NC merupakan prosedur yang menentukan urutan proses dan posisi pahat relatif terhadap benda kerja yang harus di ikuti oleh mesin untuk membuat suatu komponen produk tertentu. Pembuatan part program NC membutuhkan seorang programmer yang mampu membaca gambar teknik dengan baik, mengenal proses permesinan, dan mampu mengubah informasi gambar tersebut secara benar. Dalam makalah ini dipresentasikan sebuah program pembaca file gambar AutoCAD yang berformat *DWG (Drawing) terlebih dahulu dirubah kedalam format *DXF (Drawing Interchange Format). Semua isi file yang di inputkan dibaca dari awal sampai akhir, yang kemudian disimpan dalam sebuah buffer data. Pada tahap selanjutnya buffer data tersebut akan diekstraksi guna pendefinisian jenis feature, origin feature, dan dimensi feature. Berdasarkan tiga informasi data tersebut maka program pembaca file gambar akan membangkitkan sebuah part program NC dalam format Bahasa manual (G-Code) untuk penerapan pada mesin MC-520. Penggunaan program pembangkit program NC ini dalam suatu proses akan dapat menekan anggka kesalahan input data pada saat pembuatan program NC, mereduksi waktu pembuatan program NC yang secara keseluruhan juga akan mengurangi waktu produksi.
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Ri Liang, and Cheng Rui Zhang. "Solutions for Interpreting STEP-NC Based Part Program." Materials Science Forum 471-472 (December 2004): 344–47. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.344.

Full text
Abstract:
STEP-NC is a new CNC data interface proposed to replace ISO 6983, and has been partly formed into the draft international standard (ISO 14649). In this paper, the STEP-NC-based part program is analyzed, and the general methodology and tools for STEP-compliant application development are introduced. Then a framework for STEP-NC interpreter is proposed based on the SDAI method and the implementation solutions are presented. The EXPRESS compiler is used to convert the milling schema into C++ classes, and the information is extracted from the file in aid of data access tools. The said interpreter, which is fundamental to STEP-NC based machining, is also implemented with supporting tools in the ST-Developer environments. It is used to read the STEP-NC file into ROSE working form, and then extract and organize the manufacturing information in an object-oriented way.
APA, Harvard, Vancouver, ISO, and other styles
10

Lu, Yong, Jian Guang Li, Dong Gao, and Feng Zhou. "Reconstructing NC Program-Based Geometrical Error Compensation for Heavy-Duty NC Machine Tool." Advanced Materials Research 314-316 (August 2011): 2082–86. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.2082.

Full text
Abstract:
Heavy-duty NC machine tool is difficult and costly to evidently improve their precision via manufacturing technology only. It is proved being an effective approach to improve machine tool manufacturing precision based on software error compensation. In this paper, an error compensation algorithm based on reconstructing NC program is discussed. Following comprehensive discussion on basic algorithm of positioning error compensation in detail, linear interpolation and circular interpolation movement error compensation algorithm are further sketched in brief. To decrease the machining error, NC program is reconstructed before actual machining. The experiment results show that error compensation methods based on reconstructing NC program can improve profile accuracy of heavy-duty NC machine tools obviously.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "NC program"

1

Vondrák, Jan. "Technologie CNC frézování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228933.

Full text
Abstract:
Common possibility analysis on milling machine, analysis possibility for programming in workshop oriented milling in system Sinumerik 840D ShopMill. Project alternative manufacturing technology including creation NC programme and technical economic valuation for part of Suspension globular screw in axis X.
APA, Harvard, Vancouver, ISO, and other styles
2

Špaček, Marek. "Vytvoření SW knihovny pro řízení pohonů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220129.

Full text
Abstract:
The main aim of this thesis is to create a library in TwinCAT PLC for Beckhoff motion control without NC task. This library is targeted for less performance controllers. The next part deals with creating a PLC application for motion control with digital I/O variables or with serial line. A Windows application will be created to configure the main parameters of motion control in the PLC Application.
APA, Harvard, Vancouver, ISO, and other styles
3

Dang, Thien Ngon. "Agentenbasierter Programmassistent zur Verwaltung von NC-Informationen in Produktionssystemen mit Kommunikationsnetzwerken." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2008. http://nbn-resolving.de/urn:nbn:de:bsz:14-ds-1209564075388-09943.

Full text
Abstract:
In den letzten Jahren hat sich die rapide Entwicklung der Elektrotechnik ebenso wie die der Softwaretechnologie auf die numerischen Steuerungen in den heutigen CNC-Maschinen groß ausgewirkt. Diese numerischen Steuerungen sind sowohl intelligenter und flexibler als auch mit größerer Internspeicherkapazität ausgerüstet. Dies führt zu einer Änderung der Art und Weise, wie DNC-Systeme zu etablieren sind, besonders solcher, die auf bisher verfügbaren, aber ungleichartigen DNC-Systemen basieren. In einem solch heterogenen DNC-System wird Datenspeicherungsfähigkeit stärker verteilt angeordnet, d.h., sie ist nicht nur in einem zentralen DNC-Server vorhanden, sondern auch in Terminals oder Steuerungen selbst angelagert. Diese Änderung des Archivierungsmittels benötigt neue DNC-Software, die die DNC-Grundfunktionen voll realisiert. Zudem sollte sie auch den neuen spezifischen Softwareanforderungen entsprechen und erlauben, neue Funktionen, z.B. Maschinendatenerfassung, Betriebsdatenerfassung usw., als Module hinzuzufügen. Derzeit wird die Agententechnologie bzw. ein MAS (Multiagentensystem) als ein aussichtsreicher Ansatz angesehen, um die Probleme der heutigen komplexen Softwaresysteme, wie ungleichartige Systemumgebungen und verteilte Strukturen, zu lösen. Die vorliegende Arbeit stellt die Idee zum Aufbau eines heterogenen DNC-Systems und die Konzipierung zur Gestaltung der agentenbasierten DNC-Software vor. Ausgehend von dem vorgestellten Lösungskonzept wird zudem der Programmassistent als erster Modul der agentenbasierten DNC-Software präsentiert
In the network-based DNC systems and especially heterogeneous DNC systems data get more distributed due to the ability to store not only in the DNC Server but also in the CNC controller or CNC Terminal. This leads a challenge to the DNC software in the implementation of its basic functions. The agent-based DNC software with assistants (ADNC) is suggested to solve the above problem. Its tasks are to collect distributed NC information and transfer data safely as well as performing other extended functions, i.e. NC program generation, machine data collection, production data collection, control machines in system, etc. The present work presented the concept to develop the ADNC and its first prototype. This prototype was developed in a process using a framework of agent-based assistants, called AgentAP. It is applicable on distributed manufacturing data and had been implemented on the agent platform JADE. The module Program Assistant, one of these prototype modules, which is responsible for management, bidirectional transfer, and monitoring change of NC programs, is also discussed
APA, Harvard, Vancouver, ISO, and other styles
4

Morris, Russell Alexander. "A program for equipping elders for ministry at China Grove Church of God." Theological Research Exchange Network (TREN), 1996. http://www.tren.com.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vrzal, Jan. "Návrh designu a technologie výroby stupaček pro cestovní enduro." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241684.

Full text
Abstract:
The diploma thesis is focused on draft of footrests for endure Honda Transalp XL700V of 2008. Attention is paid to the draft of the design of the footrest which is, which is designed for driving in light off-road. There is also described the issue if the choice of the material from aluminium alloy and the verification of the methods of the designed geometry using FEM and Rapid Prototyping. The experimental part deals with the design of appropriate tools and cutting conditions and with the creation of the NC program in ShopMill. There is enclosed the technical documentation and the NC program in the final part.
APA, Harvard, Vancouver, ISO, and other styles
6

Ratica, Filip. "Rotační součást vyráběná na CNC stroji." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432712.

Full text
Abstract:
The diploma thesis contains an overview of the development of numerical control of machine tools and a historical excursion of the beginnings of numerical control. The work deals with the design and presentation of the component, and then the calculation documentation used to determine the load and safety of the component. After computational and design analysis, the work deals with the design of component production on CNC machines and the technological process of production. Finally, the production of the part is documented and evaluated.
APA, Harvard, Vancouver, ISO, and other styles
7

Cink, Vladislav. "Možnosti systému Heidenhain při programování obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229353.

Full text
Abstract:
The Description of the control system Heidenhain iTNC 530 and the machine FV 25 CNC A. Detailed analysis of the impact of single programming functions for more effectivity machining by the help of specified machine.
APA, Harvard, Vancouver, ISO, and other styles
8

Kubíček, Dominik. "Výroba kovového těsnicího kroužku na CNC obráběcím stroji." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230399.

Full text
Abstract:
Theoretical analysis of the possibility of manufacturing a metal sealing ring on the CNC machine tool. Selecting the most appropriate technology and manufacturing process analysis, involving selection of materials, tools and machining conditions.
APA, Harvard, Vancouver, ISO, and other styles
9

Rusz, Radek. "Technologie výroby kombinovaných řezných nástrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230013.

Full text
Abstract:
In the thesis is solved manufacturing technology of step drill from material of cemented carbide. At first is made review of existing shank cutting tool types, after that follows an analysis of cemented carbide tool material. In the next part of thesis is manufacturing technology of this tool, including review of grinding wheels, designed. Output of this work is procedure of program designing for manufacturing this tool in software Numroto. Next output is techno-economic evaluation of step hole manufacture with combined tool and comparison to conventional type of manufacture.
APA, Harvard, Vancouver, ISO, and other styles
10

Král, Zdeněk. "Možnosti softwaru SinuTrain 4.7 při programování CNC obráběcích strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317191.

Full text
Abstract:
This master's thesis is about the possibilities of NC programming of car wheel hub component in software SinuTrain 4.7. The theoretical part is focused on the integration of the SINUMERIK 840D control system with other control systems, it contains informations about basic methods of NC programming and research relate to the field of materials used for the production of component. The practical part of the thesis includes the design and processing of technical documentation of the component, production technology and NC program. The output of this thesis is practical verified the function of the NC program by simulation in software SinuTrain 4.7.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "NC program"

1

Workshop on Languages and Compilers for Parallel Computing (11th 1998 Chapel Hill, NC, USA). Languages and compilers for parallel computing: 11th International Workshop, LCPC'97, Chapel Hill, NC, USA, August 7-9, 1998 : proceedings. Berlin: Springer, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Levin, Kimberly S. A guide for implementing a community-based pharmaceutical assistance program: Modeled after Senior PHARMAssist, Durham, NC. [Durham, NC: Senior PHARMAssist, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tan, C. H. Checking NC part programs using PROLOG. Manchester: UMIST, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Loftus, Martin. A step towards error-free NC part programs. Birmingham: University of Birmingham, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. Congress. House. Committee on Agriculture. Subcommittee on Specialty Crops and Natural Resources. Tobacco program: Hearing before the Subcommittee on Specialty Crops and Natural Resources of the Committee on Agriculture, House of Representatives, One Hundred Third Congress, second session, July 11, 1994, Greensboro, NC. Washington: U.S. G.P.O., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. Congress. House. Committee on Agriculture. Subcommittee on Specialty Crops and Natural Resources. Tobacco program: Hearing before the Subcommittee on Specialty Crops and Natural Resources of the Committee on Agriculture, House of Representatives, One Hundred Third Congress, second session, July 11, 1994, Greensboro, NC. Washington: U.S. G.P.O., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wheeler, C. L. INGEN, a COBRA-NC input generator user's manual. Washington, DC: Division of BWR Licensing, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wheeler, C. L. INGEN, a COBRA-NC input generator user's manual. Washington, DC: Division of BWR Licensing, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wheeler, C. L. INGEN, a COBRA-NC input generator user's manual. Washington, DC: Division of BWR Licensing, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. Congress. House. Committee on Agriculture. Subcommittee on Specialty Crops and Natural Resources. Outlook for the tobacco market and flue-cured tobacco program: Hearing before the Subcommittee on Specialty Crops and Natural Resources of the Committee on Agriculture, House of Representatives, One Hundred Third Congress, second session, February 21, 1994, Lumberton, NC. Washington: U.S. G.P.O., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "NC program"

1

Renshaw, Tom. "NC program listing and analysis." In CNC Setting and Operation Workbook, 31–33. London: Macmillan Education UK, 1994. http://dx.doi.org/10.1007/978-1-349-12685-9_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jing, H. J., Y. X. Yao, S. D. Chen, and X. P. Wang. "Machining Accuracy Enhancement by Modifying NC Program." In Advances in Machining & Manufacturing Technology VIII, 71–75. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.71.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Long, Chen, Yu Dong, Hong Haitao, Guo Chong, and Han Jianqi. "Design and Implement of a Modularized NC Program Interpreter." In Communications in Computer and Information Science, 50–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24097-3_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, X. X., W. D. Li, and F. Z. He. "A Multi-granularity NC Program Optimization Approach for Energy Efficient Machining." In Sustainable Manufacturing and Remanufacturing Management, 191–212. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73488-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Haddad, Ezzeddine, Romdhane Ben Khalifa, Noureddine Ben Yahia, and Ali Zghal. "Intelligent Generation of a STEP-NC Program for Machining Prismatic Workpiece." In Design and Modeling of Mechanical Systems - II, 103–14. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17527-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Erdélyi, Ferenc, and Olivér Hornyák. "NC Program Simulation with the Capability of Generating Alternative Process Plan for Flexible Manufacturing." In IFIP Advances in Information and Communication Technology, 43–49. Boston, MA: Springer US, 2002. http://dx.doi.org/10.1007/978-0-387-35492-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kief, Hans B., Helmut A. Roschiwal, and Karsten Schwarz. "NC-Programm." In CNC-Handbuch, 559–605. München: Carl Hanser Verlag GmbH & Co. KG, 2020. http://dx.doi.org/10.3139/9783446465244.024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meinel, Christoph. "Projection Complete Graph Problems Corresponding to a Branching-Program-Based Characterization of the Complexity Classes NC 1 ,Land NL." In Mathematical Logic and Its Applications, 283–92. Boston, MA: Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-0897-3_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Neugebauer, R., P. Klimant, and V. Wittstock. "Virtual-Reality-Based Simulation of NC Programs for Milling Machines." In Global Product Development, 697–703. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-15973-2_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dodok, Tomáš, Nadežda Čuboňová, and Ivan Kuric. "Advanced Preparation of the NC Programs with Usage of Strategy Manager." In Advances in Manufacturing Engineering and Materials, 511–17. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99353-9_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "NC program"

1

Bartley-Cho, Jonathan, and William Nickerson. "Overview and Status of “Composite Joints with Inherent Disbond Arrest Capability (COJAC)” Program." In SAMPE 2019 - Charlotte, NC. SAMPE, 2019. http://dx.doi.org/10.33599/nasampe/s.19.1457.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Track Program Committees." In 2010 First International Conference on Networking and Computing (ICNC). IEEE, 2010. http://dx.doi.org/10.1109/ic-nc.2010.8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Klein, Susan West. "The distributed support program at NC State University." In the 28th annual ACM SIGUCCS conference. New York, New York, USA: ACM Press, 2000. http://dx.doi.org/10.1145/354908.354943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cui Jian and Qi Guoning. "Research on NC program design for mass customization." In International Technology and Innovation Conference 2006 (ITIC 2006). IEE, 2006. http://dx.doi.org/10.1049/cp:20060756.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Message from Program Committee Chair." In 2010 First International Conference on Networking and Computing (ICNC). IEEE, 2010. http://dx.doi.org/10.1109/ic-nc.2010.5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gao, Qi, and Yingli Zu. "Research on Universal NC Program Processor for CNC System." In 2011 Second International Conference on Digital Manufacturing and Automation (ICDMA). IEEE, 2011. http://dx.doi.org/10.1109/icdma.2011.259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Qikui, Wei Li, Youdong Chen, Hongxing Wei, and Yong Zou. "Research of NC Program Processor in Embedded Control System." In 2008 Fifth IEEE International Symposium on Embedded Computing (SEC). IEEE, 2008. http://dx.doi.org/10.1109/sec.2008.17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Luo Yongsheng and Jiang Tingbiao. "Information extraction system model based on STEP-NC program." In International Technology and Innovation Conference 2009 (ITIC 2009). IET, 2009. http://dx.doi.org/10.1049/cp.2009.1410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xueguang Li, Shuren Zhang, Linsen Song, Liqin Miao, and Dahui Liu. "Research on application of NC program optimization based on TSP." In 2009 International Conference on Mechatronics and Automation (ICMA). IEEE, 2009. http://dx.doi.org/10.1109/icma.2009.5246740.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ootsu, Kanemitsu, Takeshi Abe, Takashi Yokota, and Takanobu Baba. "Loop Performance Improvement for Min-cut Program Decomposition Method." In 2010 First International Conference on Networking and Computing (ICNC). IEEE, 2010. http://dx.doi.org/10.1109/ic-nc.2010.47.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "NC program"

1

Anderton, Gary, Ernest Berney, John Newman, Travis Mann, Chad Gartrell, and Daniel Miller. Joint Rapid Airfield Construction (JRAC) Program 2004 Demonstration Project--Fort Bragg, North Carolina. Engineer Research and Development Center (U.S.), March 2021. http://dx.doi.org/10.21079/11681/40139.

Full text
Abstract:
This report describes the demonstration of technologies and procedures developed during April 2002 and May 2004 under the Joint Rapid Airfield Construction (JRAC) Program. The demonstration took place at Sicily Landing Zone (LZ) at Fort Bragg, NC, in July of 2004. The objective of the exercise was to demonstrate the procedures and technologies developed under the JRAC Program by rapidly building two parking aprons capable of supporting C-130 transport aircraft taxiing and parking operations. The exercise was conducted under continuous 24-hr operations to simulate a real-world rapid construction environment. Apron 1 (north apron) was constructed using two technologies, one-half being ACE™ Matting and the other half being a cement-polymer stabilized soil surface. Apron 2 (south apron) was constructed solely of a fiber-cement-stabilized soil system. Both aprons were treated with a polymer emulsion surface application to form a sealed surface against abrasion and water infiltration. The entire construction of both aprons required 76 hr, with Apron 1 finished in 48 hr. The construction of Apron 1 was validated by operation of a C-130 aircraft approximately 31 hr after completion with success and high praises from the aircraft flight crew on the stability and surface of the apron, as well as its dust-abating characteristics.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'NC program' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography