Relevant bibliographies by topics / Negative incremental resistance

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers

Academic literature on the topic 'Negative incremental resistance'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Negative incremental resistance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Negative incremental resistance"

1

Siwy, Zuzanna S., Matthew R. Powell, Eric Kalman, R. Dean Astumian, and Robert S. Eisenberg. "Negative Incremental Resistance Induced by Calcium in Asymmetric Nanopores." Nano Letters 6, no. 3 (2006): 473–77. http://dx.doi.org/10.1021/nl0524290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Awang, Bin Jusoh, Firdaus Abd Razak Muhammad, Hamka Bin Saiful Mohamad, and Sutikno Tole. "Passive Damper Network in a Simple DC Distribution Power System." International Journal of Electrical and Computer Engineering (IJECE) 8, no. 1 (2018): 544–55. https://doi.org/10.11591/ijece.v8i1.pp544-555.

Full text
Abstract:
Distributed power system (DPS) distributes power amongst processing units such as power electronics converters with DC system. Due to the increasing usage of power converters in DPS system, the system becomes unstable and the converter tends to draw constant power needed by the load of the system. Constant power load (CPL) characteristic has negative input impedance that could produce instability problems in the DC bus system. Passive damping network which consists of series RC damping circuit was connected in parallel to the DC bus system with the purpose to reduce the instability. The passiv
APA, Harvard, Vancouver, ISO, and other styles
3

Duara, S., T. Gerhardt, and E. Bancalari. "Assessment of airway resistance in preterm infants during incremental inspiratory flow-resistive loading." Journal of Applied Physiology 70, no. 2 (1991): 889–94. http://dx.doi.org/10.1152/jappl.1991.70.2.889.

Full text
Abstract:
Extrathoracic airway (ETA) stability was tested by inspiratory flow-resistive loading in 10 preterm infants to determine whether ETA collapsibility was directly related to the size of the added load. A fall in intraluminal pressure was produced by applying two inspiratory flow-resistive loads of lower (L1) and higher (L2) magnitudes. An increase in intrinsic resistance was used as an index of upper airway collapsibility. Total pulmonary resistance did not change from baseline with L1 (73 +/- 26 to 71 +/- 25 cmH2O.l-1.s) but increased significantly with L2 (72 +/- 21 to 99 +/- 34 cmH2O.l-1.s, P
APA, Harvard, Vancouver, ISO, and other styles
4

Ibrahim, Reham Hesham, Dina Wafik ElKassas, Sameh Mahmoud Nabih, Mennatallah Naguib Salem, and Rasha Haridy. "The Impact of Different Fiber Placement Techniques on the Fracture Resistance of Premolars Restored with Direct Resin Composite, In Vitro Study." Journal of Functional Biomaterials 16, no. 6 (2025): 225. https://doi.org/10.3390/jfb16060225.

Full text
Abstract:
Fiber-reinforced composites (FRCs) are recognized for enhancing the fracture resistance of structurally compromised teeth. However, the optimal orientation and placement of fibers in direct resin composite restorations remain under debate. This study aimed to evaluate the fracture resistance of maxillary premolars with mesio-occluso-distal (MOD) cavities restored using polyethylene fibers with different placement techniques, compared to conventional incremental composite restoration. Methods: Sixty intact maxillary premolars were randomly assigned to six groups (n = 10). Group 1: intact teeth
APA, Harvard, Vancouver, ISO, and other styles
5

Marschall, C. W., and G. M. Wilkowski. "Effect of Cyclic Loading on Ductile Fracture Resistance." Journal of Pressure Vessel Technology 113, no. 3 (1991): 358–67. http://dx.doi.org/10.1115/1.2928767.

Full text
Abstract:
The influence of cyclic loading on ductile fracture toughness was examined from limited experimental data available in the literature. The review indicated that, in the absence of global compressive loads during the unloading cycle (R ≥ 0), the total crack extension generally is the sum of the monotonic component (Δamono) and the cyclic component (Δacyclic). The former can be obtained from the monotonic J-R curve and the latter from a fatigue-crack-growth curve. When large global compressive loads are developed during unloading (R<0), the review indicated that simply summing Δamono and Δacy
APA, Harvard, Vancouver, ISO, and other styles
6

Lee, Dongseop, Bongsoon Cho, Jeongil Seo, Khan-Pyo Lee, and Jang-Ho Choi. "Discriminant and Criterion-Related Validity of a Relative Deprivation Scale in a Merger and Acquisition Context." Psychological Reports 114, no. 1 (2014): 78–92. http://dx.doi.org/10.2466/01.08.pr0.114k14w6.

Full text
Abstract:
This study examined the discriminant and criterion-related validity of the Relative Deprivation Scale. The data were collected from 151 Korean employees who had recently experienced a merger and acquisition. The results of confirmatory factor analysis revealed that the two dimensions of relative deprivation (egoistic and fraternal relative deprivation) are clearly distinguishable from other conceptually related variables, such as negative affectivity, resistance to change, overall job dissatisfaction, and distributive justice. In addition, egoistic relative deprivation made a unique incrementa
APA, Harvard, Vancouver, ISO, and other styles
7

LIANG, RENJIE, JING WU, HANBIN GE та CHUNLIN WANG. "HYSTERETIC CHARACTERISTIC WITH P-Δ EFFECT AND ITS INFLUENCE ON COLLAPSE RESISTANCE CAPACITY OF STRUCTURE UNDER EARTHQUAKES". Journal of Earthquake and Tsunami 07, № 03 (2013): 1350022. http://dx.doi.org/10.1142/s179343111350022x.

Full text
Abstract:
P-Δ effect is one of the crucial reasons causing the collapse of structures under strong earthquake excitations. Numerical example shows that the lateral stiffness of structure decreases when the P-Δ effect is considered, and the backbone curve is easy to behave a negative slope when the geometric nonlinearity and the material nonlinearity are combined. A simplified trilinear curve including the elastic range, the yield range and the softening range is used to simulate the characteristic of the backbone curve, and the hysteretic models including the nonlinear elastic model, the full elasto-pla
APA, Harvard, Vancouver, ISO, and other styles
8

Rodriguez-Uicab, Omar, Tannaz Tayyarian, and Jandro L. Abot. "Effect of Curing Temperature of Epoxy Matrix on the Electrical Response of Carbon Nanotube Yarn Monofilament Composites." Journal of Composites Science 6, no. 2 (2022): 43. http://dx.doi.org/10.3390/jcs6020043.

Full text
Abstract:
In order to evaluate the capability of carbon nanotube yarn (CNTY)-based composites for self-sensing of temperature, the temperature-dependent electrical resistance of CNTY monofilament composites was investigated using two epoxy resins: one that cures at 130 °C (CNTY/ERHT) and one that cures at room temperature (CNTY/ERRT). The effect of the curing kinetics of these epoxy resins on the electrical response of the embedded CNTY was investigated in prior studies. It was observed that the viscosity and curing kinetics affect the level of wetting and resin infiltration, which govern the electrical
APA, Harvard, Vancouver, ISO, and other styles
9

Cullen, M. J., J. R. Cockcroft, and D. J. Webb. "Bradykinin has no acute effect on the response of forearm blood flow to sympathetic stimulation in man." Clinical Science 78, no. 4 (1990): 399–401. http://dx.doi.org/10.1042/cs0780399.

Full text
Abstract:
1. Six healthy male subjects received 0.9% (w/v) NaCl (saline) followed by incremental doses of bradykinin (1, 3 and 10 pmol/min), via the left brachial artery. Blood flow and the response of blood flow to lower-body negative pressure were measured in both forearms during infusion of saline and each dose of bradykinin. 2. Bradykinin produced a moderate and dose-dependent increase in blood flow in the infused, but not the non-infused, forearm. Lower-body negative pressure produced an approximately 15–20% reduction in blood flow in both forearms, and this response was unaffected by local infusio
APA, Harvard, Vancouver, ISO, and other styles
10

T. Adesta, Erry Yulian, Muhammad Riza, and Mohammad Yeakub Ali. "Cutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake Angles." Applied Mechanics and Materials 117-119 (October 2011): 633–38. http://dx.doi.org/10.4028/www.scientific.net/amm.117-119.633.

Full text
Abstract:
Cermets become increasingly popular cutting insert in recent years. They are generally good when accuracy and finish are criteria for the operation. Several improvements have been made to increase their performance in machining process such as higher resistance to thermal deformation and lower conductivity than carbide tools that wear rapidly. This study is to investigate cutting force and tool wear under different rake angles in high speed machining process. Experiments were carried out by using cermet insert (CT5015). Different rake angles have been applied in the experiments which are 0o, -
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Negative incremental resistance"

1

Aderinoye-Abdulwahab, S. A., and T. A. Abdulbaki. "Climate Change Adaptation Strategies Among Cereal Farmers in Kwara State, Nigeria." In African Handbook of Climate Change Adaptation. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-45106-6_228.

Full text
Abstract:
AbstractAgriculture is the art and science of food production which spans soil cultivation, crop growing, and livestock rearing. Over the years, it has served as a means of employment and accounts for more than one-third of total gross domestic product. Cereals, which include rice, maize, and sorghum, are the major dietary energy suppliers and they provide significant amounts of protein, minerals (potassium and calcium), and vitamins (vitamin A and C). The growth and good yield of cereal crop can be greatly influenced by elements of weather and climate such as temperature, sunlight, and relati
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Negative incremental resistance"

1

Wen, Bo, Dushan Boroyevich, Paolo Mattavelli, Rolando Burgos, and Zhiyu Shen. "Modeling the output impedance negative incremental resistance behavior of grid-tied inverters." In 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014. IEEE, 2014. http://dx.doi.org/10.1109/apec.2014.6803550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

RODRIGUEZ-UICAB, OMAR, JANDRO L. ABOT, and FRANCIS AVILÉS. "EFFECT OF CURING TEMPERATURE OF EPOXY RESIN ON THE ELECTRICAL RESPONSE OF CARBON NANOTUBE YARN MONOFILAMENT COMPOSITES." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35778.

Full text
Abstract:
The cyclic thermoresistive response of individual carbon nanotube yarns (CNTYs) embedded into epoxy resins is investigated. The influence of the temperature at which the epoxy resin cures on the thermoresistive response is investigated by using two epoxy resins, one that cures at room temperature and the other one that cures at 130 °C. Heating-cooling cycles ranging from room temperature (RT, 25 °C) to 80 °C, incremental cycles (RT to 40 °C, RT to 60 °C and RT to 80 °C) and incremental heating-dwell cycles are applied to monofilament composites, while their electrical resistance is simultaneou
APA, Harvard, Vancouver, ISO, and other styles
3

El-Dosoky, M. F., A. Rona, and J. P. Gostelow. "An Analytical Model for Over-Shroud Leakage Losses in a Shrouded Turbine Stage." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27786.

Full text
Abstract:
This study presents an analytical model that uses directly measurable flow quantities to predict the effects of leakage on shrouded turbine stage performance. The model displays good predictive ability for the mass leakage fraction, for the tip leakage and for the mixing losses. The model resolves the negative incidence angle induced by mixing the leakage flow with the main stream and predicts the increment in the total mixing loss coefficient at increasing injection angles. The effects of the labyrinth seal geometry, such as the tip gap width and the number of seals, on the associated leakage
APA, Harvard, Vancouver, ISO, and other styles
4

RODRÌGUEZ IZQUIERDO, D. "Mechanical characterization of plaster-based blends modified with high-density polyurethane wastes." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-250.

Full text
Abstract:
Abstract. This research applies a circular economy model by reusing polymer waste from a local company, promoting recycling and revaluing these materials with applications in the construction sector. The study focuses on a plaster-based composite material, which is incorporated with recycled high-density polyurethane (HDP) particles. Different samples were prepared with specific proportions of HDP in the plaster matrix. With the objective of evaluating the physical-mechanical properties of different compounds, the relationships among specific process variables, which affect their performance i
APA, Harvard, Vancouver, ISO, and other styles
5

Md Khan, Salman, and Swati Pal. "Change in Affective Dynamics and Cognitive State with Time during Multiplayer FPS Games." In 16th International Conference on Applied Human Factors and Ergonomics (AHFE 2025). AHFE International, 2025. https://doi.org/10.54941/ahfe1006363.

Full text
Abstract:
In the last decade, digital gaming has flourished due to the advancement of computing devices, mobiles and AR/VR. These games are immersive, interactive, cooperative and multiplayer. Different games affect gamer’s cognition, emotions and performance differently. The subjective evaluation such as questionnaires, surveys and standard scales to inspect the gaming experience is based on the retrospective recollection of the gaming experience after the task is complete. Sometimes, the responses from the gamers could be erroneous as it is hard to perceive the gaming experience. The alternative to su
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Negative incremental resistance' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography