Relevant bibliographies by topics / Nett proceeds

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Nett proceeds'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nett proceeds.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nett proceeds"

1

Nakagawa, Tessui, Hiroki Uesato, Anthony K. Burrell, Takayuki Ichikawa, Hiroki Miyaoka, Benjamin L. Davis, and Yoshitsugu Kojima. "Surface-Controlled Conversion of Ammonia Borane from Boron Nitride." Energies 13, no. 21 (October 23, 2020): 5569. http://dx.doi.org/10.3390/en13215569.

Full text
Abstract:
“One-pot regeneration”, which is simple regneneration method of ammonia borane (AB) using hydrazine and liquid ammonia, enables conversion of AB from hexagonal boron nitride (h-BN) after milling hydrogenation. Solution 11B-NMR revealed the presence of AB after NH3/N2H4 treatment of milled h-BN (BNHx) although the yield of AB was less than 5%. The conversion mechanism was clarified as B-H bonds on the h-BN surface created by ball-milling under hydrogen pressure have an ability to form AB, which was confirmed by Thermogravimetry-Residual Gas Analysis (TG-RGA) and Infrared (IR) analysis. The reaction routes are also the same as regeneration route of polyborazylene because intermediates of AB such as (B(NH2)3 and hydrazine borane were found by solution 11B-NMR after soaking BNHx in liquid NH3 and hydrazine, respectively. Because of the fact that all reactions proceed on the h-BN surface and no reaction proceeds when neat h-BN is treated, breaking of B3N3 ring structure and then creation of B-H bond is the key issue to increase conversion yield of AB.
APA, Harvard, Vancouver, ISO, and other styles
2

Boruah, Preeti Rekha, Abdul Aziz Ali, Bishwajit Saikia, and Diganta Sarma. "A novel green protocol for ligand free Suzuki–Miyaura cross-coupling reactions in WEB at room temperature." Green Chemistry 17, no. 3 (2015): 1442–45. http://dx.doi.org/10.1039/c4gc02522a.

Full text
Abstract:
A highly efficient green protocol for palladium acetate-catalysed ligand-free Suzuki–Miyaura cross-coupling reactions in neat ‘water extract of banana (WEB)’ was developed. Suzuki–Miyaura reaction proceeds in WEB at very short reaction times under ‘ligand/external base/external promoters/organic medium’ free conditions.
APA, Harvard, Vancouver, ISO, and other styles
3

Hyde, Stephen T., and Martin Cramer Pedersen. "Schwarzite nets: a wealth of 3-valent examples sharing similar topologies and symmetries." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 477, no. 2246 (February 2021): 20200372. http://dx.doi.org/10.1098/rspa.2020.0372.

Full text
Abstract:
We enumerate trivalent reticulations of two- and three-periodic hyperbolic surfaces by equal-sided n -gonal faces, ( n , 3), where n = 7, 8, 9, 10, 12. These are the simplest hyperbolic generalizations of the planar graphene net, (6, 3) and dodecahedrane, (5, 3). The enumeration proceeds by deleting isometries of regular reticulations of two-dimensional hyperbolic space until the ( n , 3) nets can be embedded in euclidean three-space via periodic hyperbolic surfaces. Those nets are then symmetrized in euclidean space retaining their net topology, leading to explicit crystallographic net embeddings whose edges are as equal as possible, affording candidtae patterns for graphitic schwarzites. The resulting schwarzites are the most symmetric examples. More than one hundred topologically distinct nets are described, most of which are novel.
APA, Harvard, Vancouver, ISO, and other styles
4

Czaja, Ludwik. "Process languages and nets." Theoretical Computer Science 238, no. 1-2 (May 2000): 161–81. http://dx.doi.org/10.1016/s0304-3975(98)00124-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, GuanJun, ChangJun Jiang, and MengChu Zhou. "Process Nets With Channels." IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans 42, no. 1 (January 2012): 213–25. http://dx.doi.org/10.1109/tsmca.2011.2157136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Slukhanchuk, E. V. "NETs and oncologic process." Obstetrics, Gynecology and Reproduction 15, no. 1 (March 6, 2021): 107–16. http://dx.doi.org/10.17749/2313-7347/ob.gyn.rep.2021.204.

Full text
Abstract:
Neutrophil Extracellular Traps (NETs) represent the networks consisting of DNA, histones, and proteins produced by activated neutrophils. Such structures have been proved to play a crucial role in inducing neutrophil innate immune response in the pathogenesis of such autoimmune conditions as systemic lupus erythematosus, rheumatoid arthritis, psoriasis, as well as in the pathogenesis of other non-infectious processes, e. g., clotting disorders, thrombosis, diabetes, atherosclerosis, vasculitis and oncology diseases. Recent studies on animal models and human pathologies have uncovered a tremendous role for NETs in tumor progression and metastasis. In this regard, NETs should be considered as pro-oncogenic substances, which further investigation will provide an opportunity to develop new therapeutic strategies.
APA, Harvard, Vancouver, ISO, and other styles
7

Heimann, Peter, Carl-Arndt Krapp, Bernhard Westfechtel, and Gregor Joeris. "Graph-Based Software Process Management." International Journal of Software Engineering and Knowledge Engineering 07, no. 04 (December 1997): 431–55. http://dx.doi.org/10.1142/s0218194097000254.

Full text
Abstract:
Software process dynamics challenge the capabilities of process-centered software engineering environments. Dynamic task nets represent evolving software processes by hierarchically organized nets of tasks which are connected by control, data, and feedback flows. Project managers operate on dynamic task nets in order to assess the current status of a project, trace its history, perform impact analysis, handle feedback, adapt the project plan to changed product structures, etc. Developers are supported through task agendas and provision of tools and documents. Chained tasks may be executed in parallel (simultaneous engineering), and cooperation is controlled through releases of document versions. Dynamic task nets are formally specified by a programmed graph rewriting system. Operations on task nets are specified declaratively by graph rewrite rules at a high level of abstraction. Furthermore, editing, analysis, and execution steps on a dynamic task net, which may be interleaved seamlessly, are described in a uniform formalism.
APA, Harvard, Vancouver, ISO, and other styles
8

BUSI, NADIA, and G. MICHELE PINNA. "Process discovery and Petri nets." Mathematical Structures in Computer Science 19, no. 6 (December 2009): 1091–124. http://dx.doi.org/10.1017/s0960129509990132.

Full text
Abstract:
The aim of the research domain known as process mining is to use process discovery to construct a process model as an abstract representation of event logs. The goal is to build a model (in terms of a Petri net) that can reproduce the logs under consideration, and does not allow different behaviours compared with those shown in the logs. In particular, process mining aims to verify the accuracy of the model design (represented as a Petri net), basically checking whether the same net can be rediscovered. However, the main mining methods proposed in the literature have some drawbacks: the classical α-algorithm is unable to rediscover various nets, while the region-based approach, which can mine them correctly, is too complex.In this paper, we compare different approaches and propose some ideas to counter the weaknesses of the region-based approach.
APA, Harvard, Vancouver, ISO, and other styles
9

Guofu, Zhou, and He Yanxiang. "Process of petri nets extension." Wuhan University Journal of Natural Sciences 11, no. 2 (February 2006): 351–54. http://dx.doi.org/10.1007/bf02832120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Badouel, Eric, and Philippe Darondeau. "Trace nets and process automata." Acta Informatica 32, no. 7 (July 1995): 647–79. http://dx.doi.org/10.1007/bf01186645.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nett proceeds"

1

Turnas, Daniel. "Next generation software process improvement." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Jun%5FTurnas.pdf.

Full text
Abstract:
Thesis (M.S. in Software Engineering)--Naval Postgraduate School, June 2003.
Thesis advisor(s): Mikhail Auguston, Christopher D. Miles. Includes bibliographical references (p. 59-61). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
2

Gains, Francesca. "Understanding department : next steps agency relationships." Thesis, University of Sheffield, 1999. http://etheses.whiterose.ac.uk/6028/.

Full text
Abstract:
This thesis examines the establishment of 'Next Steps' agencies in government and how they were intended to allow the delivery of government goals at arm's length. The research is concerned with how changes in relationships at the heart of Government can be understood. It seeks to address the impact of these changes on the policy process. It does so by examining the nature of the relationship between departments and agencies and asking why some relationships appeared to have worked well and others have not. These questions are not adequately addressed in the existing literature on agencies. The thesis takes a multiple case study approach and draws on the concepts of historical institutionalism, power dependency and policy networks to approach these questions. It is argued that the introduction and development of agencies changed the formal and informal institutional 'rules of the game', affecting the roles actors expected to play and radically altered the distribution of resources in central government. The changed distribution of resources led to the development of new power dependent networks between departments and agencies. Path dependency in the development of the Next Steps concept led to a tension between the idea of agencies operating at 'arm's length' with the continuation of traditional accountability arrangements. The key argument presented is that, where department-agency networks are based on shared values, goals and institutional support, they will be able to manage the tension created by the new institutional arrangements and are able to successfully deliver government goals. In concluding, it is suggested that understanding department-agency relationships as power dependent networks presents three implications. Firstly, for the applicability of this analytical framework to other 'institutional arrangements', secondly for policy making in the core executive and, finally, for insights on normative issues of accountability and autonomy in contemporary governance.
APA, Harvard, Vancouver, ISO, and other styles
3

Kummailil, John. "Process models for laser engineered net shaping." Link to electronic thesis, 2004. http://www.wpi.edu/Pubs/ETD/Available/etd-0429104-103828.

Full text
Abstract:
Thesis (Ph. D.)--Worcester Polytechnic Institute.
Keywords: rapid prototyping; solid freeform fabrication; LENS; laser engineered net shaping; laser; titanium. Includes bibliographical references (p. 83-85).
APA, Harvard, Vancouver, ISO, and other styles
4

Du, Dechuan [Verfasser]. "Nucleon-nucleon scattering process in Lattice Chiral Effective Field Theory approach up to next-to-next-to-next-to-leading order / Dechuan Du." Bonn : Universitäts- und Landesbibliothek Bonn, 2018. http://d-nb.info/1160594236/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chang, Ai-Fu. "Process Modeling of Next-Generation Liquid Fuel Production - Commercial Hydrocracking Process and Biodiesel Manufacturing." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/58043.

Full text
Abstract:
This dissertation includes two process modeling studies -- (1) predictive modeling of large-scale integrated refinery reaction and fractionation systems from plant data – hydrocracking process; and (2) integrated process modeling and product design of biodiesel manufacturing. \r\n1. Predictive Modeling of Large-Scale Integrated Refinery Reaction and Fractionation Systems from Plant Data -- Hydrocracking Processes: This work represents a workflow to develop, validate and apply a predictive model for rating and optimization of large-scale integrated refinery reaction and fractionation systems from plant data. We demonstrate the workflow with two commercial processes -- medium-pressure hydrocracking unit with a feed capacity of 1 million ton per year and high-pressure hydrocracking unit with a feed capacity of 2 million ton per year in the Asia Pacific. This work represents the detailed procedure for data acquisition to ensure accurate mass balances, and for implementing the workflow using Excel spreadsheets and a commercial software tool, Aspen HYSYS from Aspen Technology, Inc. The workflow includes special tools to facilitate an accurate transition from lumped kinetic components used in reactor modeling to the boiling point based pseudo-components required in the rigorous tray-by-tray distillation simulation. Two to three months of plant data are used to validate models' predictability. The resulting models accurately predict unit performance, product yields, and fuel properties from the corresponding operating conditions.\r\n2. Integrated Process Modeling and Product Design of Biodiesel Manufacturing: This work represents first a comprehensive review of published literature pertaining to developing an integrated process modeling and product design of biodiesel manufacturing, and identifies those deficient areas for further development. It also represents new modeling tools and a methodology for the integrated process modeling and product design of an entire biodiesel manufacturing train. We demonstrate the methodology by simulating an integrated process to predict reactor and \r\nseparator performance, stream conditions, and product qualities with different feedstocks. The results show that the methodology is effective not only for the rating and optimization of an existing biodiesel manufacturing, and but also for the design of a new process to produce biodiesel with specified fuel properties.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
6

Jetavat, Dhavalsinh. "Near net shape preforming by 3D weaving process." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/near-net-shape-preforming-by-3d-weaving-process(bb697182-f424-480b-963a-dc49b84425c6).html.

Full text
Abstract:
Significant proportion of composite industry is currently produced using prepregs, cured in autoclave which is very expensive and time consuming process. Dry textile preforms in conjunction with liquid molding techniques can lead to significant reductions in material costs, manufacturing costs and cycle times. These dry preforms are typically 2D woven or braided fabrics which also required lay-up and have low interlaminar properties. Through thickness reinforcement provides solution for this problem as it gives better interlaminar properties as well as near net shape performing. Various 3D performing methods are discussed and reviewed in this research where 3D weaving comes out as ideal process to develop near net shape preforms with more efficiency and better material performance. This research highlights the advantages and limitations of conventional 3D weaving processes. A number of approaches for improving the flexibility of 3D weaving process have been presented including changing fiber architecture in different sections of the preform, tapering in the width and thickness directions and finally to change the fiber orientation. It is concluded that multi step and taper fabrics can be produced on conventional weaving by some modifications. Furthermore, a novel 3D weaving machine is designed and developed after reviewing various patents and weaving methods to overcome limitations of conventional weaving machine. Key criterions from limitations of conventional weaving processes are considered and modified such as multiple weft insertion, limited warp stuffer movement, linear take-up to develop 3D weaving machine. In order to achieve isotropic material, two textile technologies are combined to get final requirements. 3D weaving can provide us fibres in 0° and 90° direction with through thickness reinforcement, whereas braiding can satisfy the requirement of bias direction fibres. Near net shape preforms such as taper and multistep are produced and laminated. Preliminary testing is performed on these laminates to evaluate fibre architectures. Further work is required in terms of machine modification which can provide weave design flexibility to explore various multilayer weave architectures. Thorough testing is required to evaluate and define structure performance and effect of fibre damage during weaving process.
APA, Harvard, Vancouver, ISO, and other styles
7

Ljungqvist, Ebba, and Johansson Sofia Stegs. "Development of Next Generation Rollator." Thesis, KTH, Maskinkonstruktion (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-182897.

Full text
Abstract:
Today the county councils in Sweden prescribe rollators, but in the near future, the retail market for rollators will increase simultaneously with increased pressure within customer requirements. Among the users there is an increased awareness and urge to have a rollator that is up to date according to today’s development of the society. Which the current rollators on the market does not do. The demands from the customer have therefore started to change and are increasing within the coming generations. This is a result of the availability and possibility of all types of information regarding the subject. This means that there is a gap on the market that is growing, which leaves room for developing of a new product, to be able to keep up with technological progress. The goal was to deliver a reasonable concept proposal for a new rollator that with further development could be taken on to the next phase of development and production. The work also aims to clarify the next generation’s customer demands. Identify the issues surrounding today's prescriptions of rollators, as well as clarify the values that are imbedded in the product. The work has been based on a method called Pretzel, which is a product developing process developed by the company Scalae. Mapping of the society's value and norms connected to the rollators shows that the biggest problem among people is the early acceptance of the aid, this results in late prescribing of rollators. Which means that unnecessary injury often occurs, that is in not only unfortunately for the injured person but also a big cost for the society. Especially in comparison with the prescription cost of a rollator. These problems are thereby deep-rooted in values that closely connected to the slow development of rollators. The technological development today is extremely fast and new products are launched on the market at increasingly speed. For example, it would be very unusually to have the same model of mobile phone as your mother had when she was young. But when it comes to rollators, it is most possible that you may get the same model as your grandmother. To decrease the resistance against rollators the final concept is inspired by existing products on the market that already are accepted by the society. Although in other contexts, such as strollers and shopping carts. By using design and functions that the user is already are familiar with reach acceptance faster and reduce the risk of injuries. The final concept is called the Dramator and is a hybrid between a shopping cart and a rollator.
Idag förskrivs rollator av Landstingen samt kommuner, men inom en snar framtid kan marknaden för retail komma att öka radikalt i samband med att kraven från kunden ökar. Det råder en allt mer ökad medvetenhet och en vilja hos kunden att få en produkt som hänger med i samhällets utveckling, vilket dagens rollatorer inte gör. Då möjligheten och tillgängligheten till all sorts information ökar bidrar detta till att framtida generationer kommer att ställa högre krav på produkten än vad som ställs idag. Detta innebär att det just nu håller på att bildas ett glapp på marknaden och att en ny produkt som hänger med teknikens framfart måste utvecklas. Målet var att komma fram till ett konceptförslag, som sedan skulle kunna tas vidare till nästa fas för vidareutveckling och produktion. Arbetet syftar även till att bringa klarhet i kundkraven hos nästa generation och problem kring dagens förskrivningar, samt klarlägga värderingar som råder kring produkten. Arbetet har utgått från en metod som heter Pretzel, som är en process för degenerering och produktutveckling framtagen av företaget Scalae. Kartläggningen av värderingarna och samhällets syn på rollatorn, visar på problem som resulterar i att många rollatorer utskrivs försent. Detta innebär att onödiga personskador hinner uppkomma som i sin tur kostar samhället mycket pengar i jämförelse med förskrivningskostnaden av en rollator. Problemen ligger djup rotade i värderingar som går hand i hand men den långsamma utvecklingen av rollatorer. Den tekniska utvecklingen går idag oerhört fort och nya produkter lanseras på marknaden med rasande fart. Att till exempel ha samma mobiltelefonmodell som sin mamma är i dagens samhälle högst orimligt, men när det gäller rollatorer kan du till och med få samma modell som din farmor hade.Konceptet är inspirerat av existerande produkter på marknaden som är socialt accepterande, fast i andra sammanhang, så som barnvagnar och klassiska Dramaten-väskan. Genom att använda formspråk och funktioner som användaren redan är bekant med är målet acceptansprocessen för användaren kan kortas ner så att hjälpmedlet kan börja användas i tid och på så sätt minska risken för fallskador. Det slutliga konceptet kallas för Dramatorn och är en hybrid mellan en dramatenväska och en rollator.
APA, Harvard, Vancouver, ISO, and other styles
8

RAMIDAN, MARCO ANTONIO DA SILVA. "THE GULLY PROCESS STUDY NEXT TO THE ITUMBIARA HYDROELECTRIC COMPLEX - GO." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2003. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=4372@1.

Full text
Abstract:
Esta dissertação, desenvolvida dentro do contexto do projeto PRONEX do Centro Geotécnico de Meio Ambiente da PUC-Rio e através de um convênio com FURNAS - PUC-Rio, apresenta uma contribuição quanto à identificação e compreensão dos mecanismos envolvidos em processos de erosão, considerando seus aspectos geológico-geotécnicos bem como medidas preventivas de reparo no caso da formação de uma voçoroca específica. A evolução do processo erosivo estudado tem suas origens na remoção mecânica de uma camada com cerca de cinco metros de solo argiloso de uma área explorada na época da construção de uma barragem de terra homogênea pertencente ao complexo Hidrelétrico de Itumbiara. Os principais aspectos da área estudada, tais como sua localização, condições climáticas e tipos de solo e vegetação foram considerados no desenvolvimento do trabalho, além de aspectos geológicos regionais e características geológico-geotécnicas da área afetada pelos processos de erosão. Tomando como base o perfil de intemperismo identificado pela inspeção das paredes da formação da voçoroca, bem como amostras de furos de sondagens SPT (ensaio de penetração normal), quatro tipos de camadas de solo foram tomados como representantes das condições do local. Objetivando-se a identificação, classificação e definição do potencial de erosão de tais materiais, espécies de amostras indeformadas de bloco (bem como as amolgadas) foram submetidas a investigações laboratoriais abrangendo: ensaio convencional de caracterização de solo; ensaio de caracterização MCT (mini-MCV); Crumb Test; ensaio de Desagregação; Pinhole Test; e Inderbitzen; ensaios de permeabilidade (também desenvolvidos em campo); análise química da água intersticial; análise mineralógica (difração de raios - X); ensaio de Resistência a Tração (sob condições de saturações diferentes) e ensaio de papel filtro (para definição das curvas características da umidade). Baseado em testes de laboratório, observações e dados de pesquisas de campo advindos de um monitoramento de poro-pressão (através de piezômetros instalados no local), mecanismos de erosão que possam predominar na área foram definidos como: micro-ravinas, ravinas e voçorocas, dentre outros. Também, ao final do trabalho, são apresentadas sugestões para remediação do local, considerando-se medidas corretivas usadas dentro do contexto da prática geotécnica convencional, e uma metodologia a ser seguida em investigações futuras relacionadas à caracterização do local e desenvolvimento de processos de erosão.
This dissertation, developed within the context of the PRONEX Project of the Environmental Geotechnical Center of PUC-Rio and through a FURNAS-PUC-Rio Convenium, presents a contribution towards the identification and comprehension of mechanisms involved in erosion processes, considering its geological and geotechnical aspects as well as preventive repairing measures in the case of a specific gully formation. The evolution of the studied erosive process has its origin in the mechanical removal of some five meters of a clayey soil layer from a borrow area exploited at the time of the construction of an homogeneous embankment dam belonging to the Itumbiara Hydroelectric Complex. The main aspects of the studied area, such as its location, climatic conditions and soil and vegetation types were considered in the development of the work, besides regional geological aspects and geological-geotechnical features of the area affected by the erosion processes. Taking as a basis the unsaturated weathering profile identified by inspection of the walls of the gully formation, as well as of samples from SPT (standard penetration test) boreholes, four types of soil layers were taken as representative of site conditions. Aiming the identification, classification and definition of the erodibility potential of such materials, specimens from undisturbed block samples (as well as remolded ones) were submitted to laboratory investigations comprising: conventional soil characterization tests; MCT characterization test (mini-MCV); crumb test; desegregation test; pinhole test; Inderbitzen test, permeability tests (also performed in the field); chemical analysis (both soil and voids -water); mineralogical analysis (Xrays diffraction); tensile strength test (under different saturation conditions) and filter paper test (for definition of soil-moisture characteristic curves). Based on the results of the laboratory tests, field observations and data from pore-pressure monitoring (through piezometers installed in the site), erosion mechanisms that may prevail in the area were defined as micro-rills, rill, gully and others. Also, at the end of the work, are presented suggestions for remediation of the site, considering corrective measures used within the context of conventional geotechnical practice, and a methodology to be followed in further investigations related to the characterization of the site and development of erosion processes.
APA, Harvard, Vancouver, ISO, and other styles
9

Etheridge, Tom. "A structural design process for a next generation aerospace design environment." Thesis, University of Southampton, 2005. https://eprints.soton.ac.uk/72036/.

Full text
Abstract:
The current structural sizing process used to design military aircraft was developed when the emphasis was on the design of the most advanced products possible, with the customer bearing the associated risks of its development. However the marketplace has evolved into where the customer expects ‘better, cheaper, faster’ products and at a lower degree of risk. It is not clear if the current structural design processes meet the needs of this type of market. This work argues that the current proprietary process should be replaced by one that is more flexible, allowing the company to adapt its current structural sizing process to meet the needs of a particular product. It includes a study of the current and future engineering environment within a ‘typical’ airframe design organisation. It looked at the current use of structural optimisation technology throughout the design lifecycle and identified barriers to the potential benefits of wider use. Two existing elements of the organisation’s in-house toolset were adapted to size components and the results compared against the literature. This provided an insight into the toolset and the development of proprietary tools. Finally a multilevel ‘global-local’ sizing approach was developed and studied as an alternative to the current, more tightly coupled, somewhat ‘monolithic’, sizing system. Strength, stability and stiffness design criteria were considered. Automation of the process was also considered and compared against the existing sizing process. It was found that the current labour intensive sizing process could be improved upon using some simple techniques. Based on this a future structural sizing process is suggested which could be implemented using in-house or commercially available tools.
APA, Harvard, Vancouver, ISO, and other styles
10

Carpio, Alvarez Gustavo Andrés, and Espinoza Denis Rolando Lopez. "Mejora en el proceso de reparación de vehículos en la empresa Carpio SAC implementando la metodología Lean Logistcs para mejorar el Net Promoter Score del servicio de Postventa." Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2020. http://hdl.handle.net/10757/656649.

Full text
Abstract:
El presente trabajo de investigación fue desarrollado en la empresa Carpio SAC los cuales luego de un análisis a profundidad se determinó que presentaba bajos indicadores de NPS del 68%, las áreas que se vieron más perjudicados por los indicadores fueron el servicio técnico (Taller) y la atención al cliente, los cuales se realizó una búsqueda de las causas principales que generan el problema mencionado. Con la finalidad de elaborar propuestas que permitan eliminar las causas que generan el problema se realizó una revisión de literatura para conocer las principales herramientas que permitan mitigar los impactos en tiempos, productividad y gestión de inventarios en el rubro automotriz. Una vez definido los conceptos se estableció el aporte de la propuesta de mejora los cuales fue la creación de una metodología lean logistics soportado en herramientas como 5’s, gestión de inventarios, trabajo estandarizado y gestión de inventarios. Luego se implementó la propuesta definida en las áreas mencionadas y se analizó los resultados obtenidos inicialmente vs los resultados finales luego de la implementación con la finalidad de evaluar si el indicador del NPS sobrepaso el objetivo del 95% de acuerdo con lo establecido por la casa matriz Volkswagen.
This research work was developed in the company Carpio SAC, which after an in-depth analysis it was determined that it had low NPS indicators of 68%, the areas that were most affected by the indicators were the technical service (Workshop) and customer service, which conducted a search for the main causes that generate the aforementioned problem. In order to prepare proposals to eliminate the causes that generate the problem, a literature review was carried out to find out the main tools that allow mitigating the impacts on time, productivity and inventory management in the automotive sector. Once the concepts were defined, the report of the improvement proposal was established, which was the creation of a lean logistics methodology supported by tools such as 5's, inventory management, standardized work and inventory management. Then, the proposal defined in the aforementioned areas was implemented and the results obtained vs the final results after implementation were analyzed in order to evaluate if the NPS indicator exceeded the 95% objective according to the Volkswagen parent company.
Tesis
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Nett proceeds"

1

Gorrieri, Roberto. Process Algebras for Petri Nets. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-55559-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Metcalfe, J. Stan. Compound learning, neural nets and the competitive process. Manchester: Centre for Research on Innovation and Competition, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Politics on the nets: Wiring the political process. New York: W.H. Freeman, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cios, Krzysztof J. A comparison of neural networks and fuzzy logic methods for process modeling. [Washington, DC]: National Aeronautics and Space Administration, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Donatelli, S. A comparison of performance evaluation process algebra and generalized stochastic Petri nets. Edinburgh: Computer Systems Group, University of Edinburgh, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

.NET patterns: Architecture, design, and process. Boston, MA: Addison-Wesley, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

The object-oriented thought process. 2nd ed. Indianapolis, Ind: Sams Pub., 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

The object-oriented thought process. 3rd ed. Indianapolis, Ind: Addison-Wesley Pub., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Weisfeld, Matt A. Object-Oriented Thought Process, The. Upper Saddle River: Pearson Education, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gaast, Koen, Machiel Keestra, Laura Koenders, Steph Menken, and Ger Post. Chapters on Interdisciplinary Research and Research Skills. NL Amsterdam: Amsterdam University Press, 2020. http://dx.doi.org/10.5117/9789463728256.

Full text
Abstract:
This book is a special edition, compiled for to the MSc Course Research Methodologies as taught at the Faculty of Aerospace Engineering at Delft University of Technology. It is a compilation of useful chapters from several sources on how to structure, set up, carry out and write up your (thesis) research to aid you in writing your research plan. Next to that it acts as a companion during your thesis research. After introducing you to the philosophy of scientific research, subsequent chapters each contribute to the different phases of your research. The book uniquely allows for the often multi- or interdisciplinary research many of you carry out, based on the established Dutch university tradition of (semi-)independent student research, creating a thread through the process for you to follow. This edition is a collection of chapters from An Introduction to Interdisciplinary Research (2016), edited by Steph Menken and Machiel Keestra, and Academic Skills for Interdisciplinary Studies. Revised edition (2019), by Koen van der Gaast, Laura Koenders and Ger Post, published by Amsterdam University Press.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Nett proceeds"

1

Bernstein, Gregory. "Gross and Net Proceeds." In Understanding the Business of Media Entertainment, 195–206. Second edition. | New York, NY : Routledge, 2019. | Series: American film market presents: Routledge, 2019. http://dx.doi.org/10.4324/9780429020827-16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tatsumisago, Masahiro, and Atsushi Sakuda. "Solution Process." In Next Generation Batteries, 77–83. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6668-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nguyen, Huu Huy Phuc, and Atsunori Matsuda. "Suspension Process." In Next Generation Batteries, 67–75. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6668-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Haas, Peter J. "The Marking Process." In Stochastic Petri Nets, 69–110. New York, NY: Springer New York, 2002. http://dx.doi.org/10.1007/0-387-21552-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Langonnet, P. "Neural Nets for Process Control." In Precision Process Technology, 631–40. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1759-3_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Badouel, Eric, Luca Bernardinello, and Philippe Darondeau. "Process Discovery." In Petri Net Synthesis, 283–300. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47967-4_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gruhn, Volker, and Ursula Wellen. "Process Landscaping: Modelling Distributed Processes and Proving Properties of Distributed Process Models." In Unifying Petri Nets, 103–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/3-540-45541-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Desel, Jörg. "Process Modeling using Petri Nets." In Process-Aware Information Systems, 147–77. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2005. http://dx.doi.org/10.1002/0471741442.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zha, Haiping, Yun Yang, Jianmin Wang, and Lijie Wen. "Transforming XPDL to Petri Nets." In Business Process Management Workshops, 197–207. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-78238-4_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ge, Jidong, Haiyang Hu, Ping Lu, Hao Hu, and Jian Lü. "Translation of Nets Within Nets in Cross-organizational Software Process Modeling." In Unifying the Software Process Spectrum, 360–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11608035_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nett proceeds"

1

Cai, Yunpeng. "Management system process modeling based on Petri nets and WF-Net." In 2010 3rd International Conference on Biomedical Engineering and Informatics (BMEI). IEEE, 2010. http://dx.doi.org/10.1109/bmei.2010.5639566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lehman, M. M. "Process modelling---where next." In the 19th international conference. New York, New York, USA: ACM Press, 1997. http://dx.doi.org/10.1145/253228.253441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Haoyu, Piyush Pathak, Frank E. Gennari, Ya-Chieh Lai, and Bei Yu. "Hotspot detection using squish-net." In Design-Process-Technology Co-optimization for Manufacturability XIII, edited by Jason P. Cain and Chi-Min Yuan. SPIE, 2019. http://dx.doi.org/10.1117/12.2515172.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Börger, Egon, and Albert Fleischmann. "Abstract state machine nets." In S-BPM ONE '15: 7th International Conference on Subject-Oriented Business Process Management. New York, NY, USA: ACM, 2015. http://dx.doi.org/10.1145/2723839.2723840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jiao, Roger Jianxin, and Linda Lianfeng Zhang. "Modeling Process Platform-Based Production Reconfiguration With Petri Nets." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35737.

Full text
Abstract:
The production processes of product families involve diverse changeovers in manufacturing and assembly processes in order to accommodate a high variety of component parts and assemblies. Reconfiguring production processes based on process platforms has been recognized as a promising means for companies to produce product variety while achieving mass production efficiency. Aiming at modeling support to production reconfiguration, this paper develops a multilevel system of nested colored object-oriented Petri nets (PNs) with changeable structures. In accordance with the fundamental issues of production reconfiguration, the modeling formalism is developed by taking advantages of several PNs techniques, including colored PNs, object-oriented PNs, changeable PNs, and nested PNs. The modeling formalism comprises a resource net, manufacturing net, assembly net and process net. The paper demonstrates how these net definitions are applied to specify production processes at different levels of abstraction. Also reported is a case study in an electronics company. The application results reveals the feasibility of the nested colored object-oriented PNs with changeable structures for capturing and representing the logic of production reconfiguration based on process platforms.
APA, Harvard, Vancouver, ISO, and other styles
6

Hooi, Teh Eng, Cheah Fook Nyen, and Lee Wei Tsun. "What's Next After Process Characterization." In 2007 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium. IEEE, 2007. http://dx.doi.org/10.1109/iemt.2007.4417047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Grigorova, Katalina. "Process modelling using Petri nets." In the 4th international conference conference. New York, New York, USA: ACM Press, 2003. http://dx.doi.org/10.1145/973620.973636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cadena Vinueza, Maria Jose, Tod E. Robinson, and Martin Klos. "Next generation nanomachining process technologies." In Photomask Technology, edited by Stephen P. Renwick and Moshe E. Preil. SPIE, 2020. http://dx.doi.org/10.1117/12.2573093.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Delic, Kemal A., and Jeff A. Riley. "Enterprise Knowledge Clouds: Next Generation KM Systems?" In 2009 International Conference on Information, Process, and Knowledge Management (eKNOW). IEEE, 2009. http://dx.doi.org/10.1109/eknow.2009.28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Aagaard, Troels, and Aart Kroon. "Mesoscale Behaviour of Longshore Bars — Net Onshore or Net Offshore Migration." In Sixth International Symposium on Coastal Engineering and Science of Coastal Sediment Process. Reston, VA: American Society of Civil Engineers, 2007. http://dx.doi.org/10.1061/40926(239)167.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nett proceeds"

1

Knapp, Cameron M. Laser Engineered Net Shaping Process Characterization. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1089454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Seybold, Patricia. The Next Big Thing: Adaptive Business Process Management. Boston, MA: Patricia Seybold Group, October 2002. http://dx.doi.org/10.1571/psgp10-11-02cc.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Naegelin, Calvin C., and Paul J. McCrone. The Mesoscale Forecasting Process: Applying the Next Generation Mesoscale Forecast. Fort Belvoir, VA: Defense Technical Information Center, October 2006. http://dx.doi.org/10.21236/ada465918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Graham, David R., and Stanley A. Horowitz. Next Steps for Managing Defense Agencies, Field Activities, and Support Process. Fort Belvoir, VA: Defense Technical Information Center, December 2001. http://dx.doi.org/10.21236/ada403864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Moyer, Bruce A., Laetitia Helene Delmau, Nathan C. Duncan, Dale Ensor, Talon G. Hill, Denise L. Lee, Benjamin D. Roach, Frederick {Fred} V. Sloop Jr, and Neil J. Williams. Recommended Guanidine Suppressor for the Next-Generation Caustic-Side Solvent Extraction Process. Office of Scientific and Technical Information (OSTI), January 2013. http://dx.doi.org/10.2172/1060846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Howell, Steven L. Evaluation Process Report for Next Generation Computer Resources Operating Systems Interface Baseline Selection. Fort Belvoir, VA: Defense Technical Information Center, May 1990. http://dx.doi.org/10.21236/ada228594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Penedo, Maria H. PSEE Architecture Report. Architectures and Models for Next Generation Process-based Software Engineering Environments. Fort Belvoir, VA: Defense Technical Information Center, February 1995. http://dx.doi.org/10.21236/ada291268.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Leonard, R. Initial flowsheet for the next generation CSSX process in the MCU. Report for FY2010. Office of Scientific and Technical Information (OSTI), November 2012. http://dx.doi.org/10.2172/1054868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Keicher, D. M., J. A. Romero, C. L. Atwood, M. L. Griffith, F. P. Jeantette, L. D. Harwell, D. L. Greene, and J. E. Smugeresky. Free form fabrication using the laser engineered net shaping (LENS{trademark}) process. Office of Scientific and Technical Information (OSTI), December 1996. http://dx.doi.org/10.2172/425303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hubbard, R. Glenn, and Anil Kashyap. Internal Net Worth and the Investment Process: An Application to U.S. Agriculture. Cambridge, MA: National Bureau of Economic Research, April 1990. http://dx.doi.org/10.3386/w3339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nett proceeds' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography