Relevant bibliographies by topics / Newtonian Fluid

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Newtonian Fluid'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Newtonian Fluid.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Newtonian Fluid"

1

Martínez, Javier Andrés, Freddy Humberto Escobar, and José Humberto Cantillo. "Applying Tiab's direct synthesis technique to dilatant non-Newtonian/Newtonian fluids." Ingeniería e Investigación 31, no. 3 (September 1, 2011): 130–34. http://dx.doi.org/10.15446/ing.investig.v31n3.26404.

Full text
Abstract:
Non-Newtonian fluids, such as polymer solutions, have been used by the oil industry for many years as fracturing agents and drilling mud. These solutions, which normally include thickened water and jelled fluids, are injected into the formation to enhanced oil recovery by improving sweep efficiency. It is worth noting that some heavy oils behave non-Newtonianly. Non-Newtonian fluids do not have direct proportionality between applied shear stress and shear rate and viscosity varies with shear rate depending on whether the fluid is either pseudoplastic or dilatant. Viscosity decreases as shear rate increases for the former whilst the reverse takes place for dilatants. Mathematical models of conventional fluids thus fail when applied to non-Newtonian fluids. The pressure derivative curve is introduced in this descriptive work for a dilatant fluid and its pattern was observed. Tiab's direct synthesis (TDS) methodology was used as a tool for interpreting pressure transient data to estimate effective permeability, skin factors and non-Newtonian bank radius. The methodology was successfully verified by its application to synthetic examples. Also, comparing it to pseudoplastic behavior, it was found that the radial flow regime in the Newtonian zone of dilatant fluids took longer to form regarding both the flow behavior index and consistency factor.
APA, Harvard, Vancouver, ISO, and other styles
2

Nabwey, Hossam A., Farhad Rahbar, Taher Armaghani, Ahmed M. Rashad, and Ali J. Chamkha. "A Comprehensive Review of Non-Newtonian Nanofluid Heat Transfer." Symmetry 15, no. 2 (January 29, 2023): 362. http://dx.doi.org/10.3390/sym15020362.

Full text
Abstract:
Nanofluids behave like non-Newtonian fluids in many cases and, therefore, studying their symmetrical behavior is of paramount importance in nanofluid heat transfer modeling. This article attempts to provide are flection on symmetry via thorough description of a variety of non-Newtonian models and further provides a comprehensive review of articles on non-Newtonian models that have applied symmetrical flow modeling and nanofluid heat transfer. This study reviews articles from recent years and provides a comprehensive analysis of them. Furthermore, a thorough statistical symmetrical analysis regarding the commonality of nanoparticles, base fluids and numerical solutions to equations is provided. This article also investigates the history of nanofluid use as a non-Newtonian fluid; that is, the base fluid is considered to be non-Newtonian fluid or the base fluid is Newtonian, such as water. However, the nanofluid in question is regarded as non-Newtonian in modeling. Results show that 25% of articles considered nanofluids with Newtonian base fluid as a non-Newtonian model. In this article, the following questions are answered for the first time: Which non-Newtonian model has been used to model nanofluids? What are the most common non-Newtonian base fluids? Which numerical method is most used to solve non-Newtonian equations?
APA, Harvard, Vancouver, ISO, and other styles
3

Safa Riyadh Ridha. "A Review Report of Present Trend in Peristaltic Activity of MHD NON-Newtonian and Newtonian Fluids." Jornual of AL-Farabi for Engineering Sciences 1, no. 2 (December 1, 2022): 9. http://dx.doi.org/10.59746/jfes.v1i2.40.

Full text
Abstract:
This academic paper deals with reviewing theoretical studies on MHD peristaltic transport of the Non-Newtonian as well as Newtonian fluids such as Hyperbolic Tangent fluid, Carreau fluid and Bingham fluid. Here, a wide range of study subjects, concepts, points of view, and mathematical models are presented. All of these studies are focused on Non-Newtonian fluids peristaltic activity. Among numerous of the Non- Newtonian fluids flows in physiological system, blood pumping mechanics
APA, Harvard, Vancouver, ISO, and other styles
4

Shaukat, Ayesha, Muhammad Mushtaq, Saadia Farid, Kanwal Jabeen, and Rana Muhammad Akram Muntazir. "A Study of Magnetic/Nonmagnetic Nanoparticles Fluid Flow under the Influence of Nonlinear Thermal Radiation." Mathematical Problems in Engineering 2021 (November 20, 2021): 1–15. http://dx.doi.org/10.1155/2021/2210414.

Full text
Abstract:
The present research work scrutinizes numerical heat transfer in convective boundary layer flow having characteristics of magnetic ( Fe 3 O 4 ) and nonmagnetic ( Al 2 O 3 ) nanoparticles synthesized into two different kinds of Newtonian (water) and non-Newtonian (sodium alginate) convectional base fluids of casson nanofluid which integrates the captivating effects of nonlinear thermal radiation and magnetic field embedded in a porous medium. The characterization of electrically transmitted viscous incompressible fluid is taken into account within the Casson fluid model. The mathematical formulation of governing partial differential equations (PDEs) with highly nonlinearity is renovated into ordinary differential equations (ODEs) by utilizing the suitable similarity transform that constitutes nondimensional pertinent parameters. The transformed ODEs are tackled numerically by implementing b v p 4 c in MATLAB. A graphical illustration for the purpose of better numerical computations of flow regime is deliberated for the specified parameters corresponding to different profiles (velocity and temperature). To elaborate the behavior of Nusselt and skin friction factor, a tabular demonstration against the distinct specific parameters is analyzed. It is perceived that the velocity gradient of Newtonian fluids is much higher comparatively to non-newtonian fluids. On the contrary, the thermal gradient of non-Newtonian fluid becomes more condensed than that of Newtonian fluids. Graphical demonstration disclosed that the heat transfer analysis in non-Newtonian (sodium alginate)-based fluid is tremendously influenced comparatively to Newtonian (water)-based fluid, and radiation interacts with the highly denser temperature profile of non-Newtonian fluid in contrast to that of Newtonian fluid. Through such comparative analysis of magnetic or nonmagnetic nanoparticles synthesized into distinct base fluids, a considerable enhancement in thermal and heat transfer analysis is quite significant in many expanding engineering and industrial phenomenons.
APA, Harvard, Vancouver, ISO, and other styles
5

Kawase, Y. "Particle-fluid heat/mass transfer: Newtonian and non-Newtonian fluids." Wärme- und Stoffübertragung 27, no. 2 (February 1992): 73–76. http://dx.doi.org/10.1007/bf01590121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

ALBAALBAKI, BASHAR, and ROGER E. KHAYAT. "Pattern selection in the thermal convection of non-Newtonian fluids." Journal of Fluid Mechanics 668 (January 5, 2011): 500–550. http://dx.doi.org/10.1017/s0022112010004775.

Full text
Abstract:
The thermogravitational instability in a fluid layer of a non-Newtonian medium heated from below is investigated. Linear and weakly nonlinear analyses are successively presented. The fluid is assumed to obey the Carreau–Bird model. Although the critical threshold is the same as for a Newtonian fluid, it is found that non-Newtonian fluids can convect in the form of rolls, squares or hexagons, depending on the shear-thinning level. Similar to Newtonian fluids, shear-thickening fluids convect only in the form of rolls. The stability of the convective steady branches is carried out to determine under which specific conditions a pattern is preferred. The influence of the rheological and physical parameters is examined and discussed in detail.
APA, Harvard, Vancouver, ISO, and other styles
7

Bouchendouka, Abdellah, Zine El Abiddine Fellah, Zakaria Larbi, Zineeddine Louna, Erick Ogam, Mohamed Fellah, and Claude Depollier. "Fractal Analysis of a Non-Newtonian Fluid Flow in a Rough-Walled Pipe." Materials 15, no. 10 (May 22, 2022): 3700. http://dx.doi.org/10.3390/ma15103700.

Full text
Abstract:
The fully developed laminar flow of a viscous non-Newtonian fluid in a rough-walled pipe is considered. The fluid rheology is described by the power–law model (covering shear thinning, Newtonian, and shear thickening fluids). The rough surface of the pipe is considered to be fractal, and the surface roughness is measured using surface fractal dimensions. The main focus of this study lies in the theoretical investigation of the influence of the pipe surface roughness on the velocity profile and the Darcy friction factor of an incompressible non-Newtonian fluid. The plotted results demonstrate that shear thinning fluids are the most sensitive to the surface roughness compared with Newtonian and shear thickening fluids. For a particular value of the surface fractal dimension, there exists an intersection point where shear thinning, Newtonian, and shear thickening fluids behave the same way regarding the amplitude of the velocity profile and the friction factor. This approach has a variety of potential applications, for instance fluid dynamics in hydrology, blood flow in the cardiovascular system, and many industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
8

Ahamed, M. Fazil, and Sriram Chauhan. "Hydraulic Actuator Systems with Non-Newtonian Working Fluid." Bonfring International Journal of Industrial Engineering and Management Science 6, no. 4 (October 31, 2016): 135–39. http://dx.doi.org/10.9756/bijiems.7575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shan, Jie, and Xiaojun Zhou. "The Effect of Bubbles on Particle Migration in Non-Newtonian Fluids." Separations 8, no. 4 (March 24, 2021): 36. http://dx.doi.org/10.3390/separations8040036.

Full text
Abstract:
The movement of the gas–liquid interface caused by the movement of the bubble position will have an impact on the starting conditions for particle migration. This article quantifies the influence of moving bubbles on the starting conditions of particle migration in non-Newtonian fluids, and it aims to better understand the influence of bubbles moving in non-Newtonian fluids on particle migration to achieve more effective control. First, the forces and moments acting on the particles are analyzed; then, fluid dynamics, non-Newtonian fluid mechanics, extended DLVO (Derjaguin Landau Verwey Overbeek theory), surface tension, and friction are applied on the combined effects of particle migration. Then, we reasonably predict the influence of gas–liquid interface movement on particle migration in non-Newtonian fluids. The theoretical results show that the movement of the gas–liquid interface in non-Newtonian fluids will increase the separation force acting on the particles, which will lead to particle migration. Second, we carry out the particle migration experiment of moving bubbles in non-Newtonian fluid. Experiments show that when the solid–liquid two-phase flow is originally stable, particle migration occurs after the bubble movement is added. This phenomenon shows that the non-Newtonian fluid with bubble motion has stronger particle migration ability. Although there are some errors, the experimental results basically support the theoretical data.
APA, Harvard, Vancouver, ISO, and other styles
10

Övgün, Ali, and Ines G. Salako. "Thin-shell wormholes in neo-Newtonian theory." Modern Physics Letters A 32, no. 23 (July 3, 2017): 1750119. http://dx.doi.org/10.1142/s021773231750119x.

Full text
Abstract:
In this paper, we constructed an acoustic thin-shell wormhole (ATW) under neo-Newtonian theory using the Darmois–Israel junction conditions. To determine the stability of the ATW by applying the cut-and-paste method, we found the surface density and surface pressure of the ATW under neo-Newtonian hydrodynamics just after obtaining an analog acoustic neo-Newtonian solution. We focused on the effects of the neo-Newtonian parameters by performing stability analyses using different types of fluids, such as a linear barotropic fluid (LBF), a Chaplygin fluid (CF), a logarithmic fluid (LogF) and a polytropic fluid (PF). We showed that a fluid with negative energy is required at the throat to keep the wormhole stable. The ATW can be stable if suitable values of the neo-Newtonian parameters [Formula: see text], A and B are chosen.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Newtonian Fluid"

1

ABDU, ALINE AMARAL QUINTELLA. "NON-NEWTONIAN FLUID DISPLACEMENT IN ANNULI." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2016. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=29332@1.

Full text
Abstract:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
Na indústria do petróleo são comuns processos envolvendo deslocamentos de um fluido pelo outro, como nos processos de completação e cimentação de poços. A eficiência desses deslocamentos é de suma importância, garantindo a vida útil do poço. A operação é considerada adequada quando ocorre uma distribuição homogênea da pasta de cimento na parede do poço. No presente trabalho um estudo experimental e numérico do deslocamento de fluidos em espaço anular foi realizada. Para os testes experimentais um simulador físico de um poço em escala foi construído. As equações de conservação de massa e momento foram resolvidas através do método de volumes finitos, utilizando os programas Fluent e OpenFOAM. Para a modelagem multifásica foi utilizado o método volume-of-fluid (VOF). No estudo, a avaliação da influência de parâmetros reológicos, razões de densidade e viscosidade, geometria do poço e vazão de bombeio foi realizada com o objetivo de otimizar o processo de cimentação. Os fluidos utilizados foram fluidos modelos e reais, newtonianos e não newtonianos. A eficiência de deslocamento foi avaliada através da configuração da interface entre os fluidos e através da determinação do da densidade da mistura na saída do anular ao longo do tempo.
Displacement of one fluid by another is a common process at petroleum industry, as completion and cementing operations of oil wells. The success of these fluids displacement guarantee the lifetime of the wells. The adequate operation occurs when the cement slurry distribution at the wall is homogeneous. In this work, experimental and numerical studies of Newtonian and non-Newtonian fluid displacement through annuli are performed. The experiments are performed using a scaled oil well model. The numerical solution of the governing conservation equations of mass and momentum is obtained using the finite volume technique and Fluent and OpenFOAM softwares. The multiphase modeling is performed using the volume of fluid (VOF) method. The effect of rheological parameters, density and viscosity ratios, geometry configuration, and flow rate on displacement efficiency was evaluated to optimize cementing operation. Tests were performed using model and real fluids, Newtonian and non-Newtonian. The displacement efficiency was evaluated analyzing the interface between fluids and measuring the density of the mixture at the annuli outlet through time.
APA, Harvard, Vancouver, ISO, and other styles
2

Gouldson, Iain William. "The flow of Newtonian and non-Newtonian fluids in an annular geometry." Thesis, University of Liverpool, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.243035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Keiller, Robert A. "Non-Newtonian extensional flows." Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.315030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mennad, Abed. "Singular behaviour of Non-Newtonian fluids." Thesis, Peninsula Technikon, 1999. http://hdl.handle.net/20.500.11838/1253.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Peninsula Technikon, 1999
Since 1996, a team at the Centre for Research in Applied Technology (CRATECH) at Peninsula Technikon, under NRF sponsorship and with industrial co-operation, has been involved in the simulation of Non-Newtonian flow behaviour in industrial processes, in particular, injection moulding of polymers. This study is an attempt to deal with some current issues of Non-Newtonian flow, in small areas, from the viewpoint of computational mechanics. It is concerned with the numerical simulation of Non-Newtonian fluid flows in mould cavities with re-entrant corners. The major complication that exists in this numerical simulation is the singularity of the stresses at the entry of the corner, which is responsible for nonintegrable stresses and the propagation of solution errors. First, the study focuses on the derivation of the equations of motion of the flow which leads to Navier- Stokes equations. Thereafter, the occurrence of singularities in the numerical solution of these equations is investigated. Singularities require special attention no matter what numerical method is used. In finite element analysis, local refinement around the singular point is often employed in order to improve the accuracy. However, the accuracy and the rate of convergence are not, in general, satisfactory. Incorporating the nature of singularity, obtained by an asymptotic analysis in the numerical solution, has proven to be a very effective way to improve the accuracy in the neighborhood of the singularity and, to speed up the rate of convergence. This idea has been successfully adopted in solving mainly fracture mechanics problems by a variety of methods: finite difference, finite elements, boundary and global elements, and spectral methods. In this thesis, the singular finite elements method (SFEM), similar in principle to the crack tip element used in fracture mechanics, is proposed to improve the solution accuracy in the vicinity of the singular point and to speed up the rate of convergence. This method requires minor modifications to standard finite element schemes. Unfortunately, this method could not be implemented in this study due to the difficulty in generating the mesh for the singular element. Only the standard finite element method with mesh refinement has been used. The results obtained are in accordance with what was expected.
APA, Harvard, Vancouver, ISO, and other styles
5

Callahan, Thomas Patrick. "Non-Newtonian fluid injection into granular media." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/39618.

Full text
Abstract:
The process of fluid injection into granular media is relevant to a wide number of applications such as enhanced oil recovery, grouting, and the construction of permeable reactive barriers. The response of the subsurface is dependent on multiple factors such as in-situ stresses, fluid properties, flow rate, and formation type. Based on these conditions a variety of response mechanisms can be initiated ranging from simple porous infiltration to hydraulic fracturing. Currently, the mechanics of fluid injection into competent rock are well understood and can be sufficiently modeled using linear elastic fracture mechanics. Because the grains in rock formations are individually cemented together, they exhibit cohesion and are able to support tensile stresses. The linear elastic method assumes tensile failure due to stress concentrations at the fracture tip. A fracture propagates when the stress intensity factor exceeds the material toughness (Detournay, 1988) However, understanding fluid injection in cohesionless granular media presents a much larger obstacle. Currently, no theoretical models have been developed to deal with granular media displacements due to fluid injection. Difficulty arises from the complexity of fluid rheology and composition used in engineering processes, the strong coupling between fluid flow and mechanical deformation, the non-linear response of subsurface media, and the multi-scale nature of the problem. The structure of this thesis is intended to first give the reader a basic background of some of the fundamental concepts for non-Newtonian fluid flow in granular media. Fluid properties as well as some interaction mechanisms are described in relation to the injection process. Next, the results from an experimental series of injection tests are presented with a discussion of the failure/flow processes taking place. We developed a novel technique which allows us to visualize the injection process by use of a transparent Hele-Shaw cell. Specifically, we will be using polyacrylamide solutions at a variety of concentrations to study non-Newtonian effects on the response within the Hele-Shaw cell. By performing tests at a range of solution concentrations and injection rates we are to be able to identify a transition from an infiltration dominated flow regime to a fracturing dominated regime.
APA, Harvard, Vancouver, ISO, and other styles
6

Khahledi, Morakane Charlotte. "Non-Newtonian fluid flow measurement using sharp crested notches." Thesis, Cape Peninsula University of Technology, 2014. http://hdl.handle.net/20.500.11838/1038.

Full text
Abstract:
Master of Technology: Civil Engineering In the Faculty of Engineering At the Cape Peninsula University of Technology 2014
Notches, particularly rectangular and V shaped are the cheapest and most common devices used to measure the flow rate of water in open channels. However, they have not been used to measure the flow rate of non-Newtonian fluids. These viscous fluids behave differently from water. It is difficult to predict the flow rate of such fluids during transportation in open channels due to their complex viscous properties. The aim of this work was to explore the possibility of extending the application of especially rectangular and V-shaped notches to non-Newtonian fluids. The tests reported in this document were carried out in the Flow Process and Rheology Centre laboratory. Notches fitted to the entrance of a 10 m flume and an in-line tube viscometer were calibrated using water. The in-line tube viscometer with 13 and 28 mm diameter tubes was used to determine the fluid rheology. Flow depth was determined using digital depth gauges and flow rate measurements using magnetic flow meters. Three different non-Newtonian fluids, namely, aqueous solutions of Carboxymethyl Cellulose (CMC) and water-based suspensions of kaolin and bentonite were used as model non-Newtonian test fluids. From these the coefficient of discharge (Cd) values and appropriate non-Newtonian Reynolds numbers for each fluid and concentration were calculated. The experimental values of the coefficient of discharge (Cd) were plotted against three different definitions of the Reynolds number. Under laminar flow conditions, the discharge coefficient exhibited a typical dependence on the Reynolds number with slopes of ~0.43-0.44 for rectangular and V notches respectively. The discharge coefficient was nearly constant in the turbulent flow regime. Single composite power-law functions were used to correlate the Cd-Re relationship for each of the two notch shapes used. Using these correlations, the Cd values could be predicted to within ±5% for the rectangular and V notches. This is the first time that such a prediction has been done for a range of non-Newtonian fluids through sharp crested notches. The research will benefit the mining and food processing industries where high concentrations of non-Newtonian fluids are transported to either disposal sites or during processing.
APA, Harvard, Vancouver, ISO, and other styles
7

Vayssière, Brandão Pedro <1993&gt. "Linear and nonlinear thermal instability of Newtonian and non-Newtonian fluid saturated porous media." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2022. http://amsdottorato.unibo.it/10143/1/VayssiereBrandao_Pedro_PhD_Thesis.pdf.

Full text
Abstract:
The present work aims to investigate the influence of different aspects, such as non-standard steady solutions, complex fluid rheologies and non-standard porous-channel geometries, on the stability of a Darcy-Bénard system. In order to do so, both linear and nonlinear stability theories are considered. A linear analysis focuses on studying the dynamics of the single disturbance wave present in the system, while its nonlinear counterpart takes into consideration the interactions among the single modes. The scope of the stability analysis is to obtain information regarding the transition from an equilibrium solution to another one, and also information regarding the transition nature and the emergent solution after the transition. The disturbance governing equations are solved analytically, whenever possible, and numerical by considering different approaches. Among other important results, it is found that a cylinder cross-section does not affect the thermal instability threshold, but just the linear pattern selection for dilatant and pseudoplastic fluid saturated porous media. A new rheological model is proposed as a solution for singular issues involving the power-law model. Also, a generalised class of one parameter basic solutions is proposed as an alternative description of the isoflux Darcy--Bénard problem. Its stability is investigated.
APA, Harvard, Vancouver, ISO, and other styles
8

Vongvuthipornchai, Somporn. "Well test analysis for non-Newtonian fluid flow /." Access abstract and link to full text, 1985. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8603796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ketheeswaranathan, Nishanthi. "Rehological study of non-Newtonian fluid through microchannels." Thesis, University of Leeds, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.540775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yim, Samson Sau Shun. "The effect of flow stability on residence time distribution of Newtonian and non-Newtonian liquids in couette flow." Thesis, University College London (University of London), 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Newtonian Fluid"

1

Böhme, G. Non-Newtonian fluid mechanics. Amsterdam: North-Holland, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

J, Balmforth Neil, Hinch John, and Woods Hole Oceanographic Institution, eds. Non-Newtonian geophysical fluid dynamics. Woods Hole, Mass: WHOI, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Theory and applications of nonviscous fluid flows. New York: Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zeytounian, R. Kh. Modélisation asymptomatique en mécanique des fluides newtoniens. Paris: Springer-Verlag, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Symposium on Multiphase Fluid, Non-Newtonian Fluid and Physico-Chemical Fluid Flows (1997 Beijing, China). Multiphase fluid, non-Newtonian fluid and physico-chemical fluid flows: Proceedings of the International Symposium on Multiphase Fluid, Non-Newtonian Fluid and Physico-Chemical Fluid Flows (ISMNP' 97), October 7-10, 1997, Beijing China. Beijing, China: International Academic Publishers, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

I͡Ankov, Viktor Ivanovich. Osnovy mekhaniki nenʹi͡utonovskikh zhidkosteĭ: Uchebnoe posobie. Tverʹ: Tverskoĭ politekhn. in-t, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bubbles, drops, and particles in non-Newtonian fluids. 2nd ed. Boca Raton, FL: CRC Taylor & Francis, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Farina, Angiolo, Lorenzo Fusi, Andro Mikelić, Giuseppe Saccomandi, Adélia Sequeira, and Eleuterio F. Toro. Non-Newtonian Fluid Mechanics and Complex Flows. Edited by Angiolo Farina, Andro Mikelić, and Fabio Rosso. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74796-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Richardson, J. F. (John Francis), Knovel (Firm), and ScienceDirect (Online service), eds. Non-Newtonian flow and applied rheology: Engineering applications. 2nd ed. Amsterdam: Butterworth-Heinemann/Elsevier, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Meeting, American Society of Mechanical Engineers Winter. Recent advances in non-newtonian flows: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, N.Y: American Society of Mechanical Engineers, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Newtonian Fluid"

1

Deville, Michel O. "Incompressible Newtonian Fluid Mechanics." In An Introduction to the Mechanics of Incompressible Fluids, 1–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04683-4_1.

Full text
Abstract:
AbstractThis chapter, presents the basic concepts of fluid mechanics such as velocity, acceleration, material derivative and the governing equations obtained from the conservation laws of mass, momentum, angular momentum and energy. The introduction of the constitutive relation for viscous incompressible Newtonian fluid leads to the Navier–Stokes equations. Boundary and initial conditions are discussed. Special attention is devoted to the meaning and differences between incompressible and compressible fluids. The Boussinesq equations are described. The chapter ends with considerations on the control volume method, a very efficient tool to solve fluid problems.
APA, Harvard, Vancouver, ISO, and other styles
2

Nedderman, R. M. "Newtonian fluid mechanics." In Chemical Engineering for the Food Industry, 63–104. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-3864-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bahr, Benjamin, Boris Lemmer, and Rina Piccolo. "Non-Newtonian Fluid." In Quirky Quarks, 38–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49509-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bird, R. Byron, and John M. Wiest. "Non-Newtonian Liquids." In Handbook of Fluid Dynamics and Fluid Machinery, 223–302. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470172636.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chhabra, Raj P., and Swati A. Patel. "Non-Newtonian Fluid Behavior." In Bubbles, Drops, and Particles in Non-Newtonian Fluids, 7–44. 3rd ed. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9780429260759-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Irgens, Fridtjov. "Advanced Fluid Models." In Rheology and Non-Newtonian Fluids, 143–67. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01053-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nijenhuis, Klaas, Gareth McKinley, Stephen Spiegelberg, Howard Barnes, Nuri Aksel, Lutz Heymann, and Jeffrey Odell. "Non-Newtonian Flows." In Springer Handbook of Experimental Fluid Mechanics, 619–743. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-30299-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jang, J. Y., and M. M. Khonsari. "Lubrication with a Newtonian Fluid." In Encyclopedia of Tribology, 2142–46. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Osswald, Tim, and Natalie Rudolph. "Generalized Newtonian Fluid (GNF) Models." In Polymer Rheology, 59–99. München: Carl Hanser Verlag GmbH & Co. KG, 2014. http://dx.doi.org/10.3139/9781569905234.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Irgens, Fridtjov. "Basic Equations in Fluid Mechanics." In Rheology and Non-Newtonian Fluids, 25–61. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01053-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Newtonian Fluid"

1

Tripathi, Nitish, and P. J. Narayanan. "Generalized newtonian fluid simulations." In 2013 Fourth National Conference on Computer Vision, Pattern Recognition, Image Processing and Graphics (NCVPRIPG). IEEE, 2013. http://dx.doi.org/10.1109/ncvpripg.2013.6776169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

De Souza Bezerra, Wesley, Antonio Castelo, and Alexandre Afonso. "NUMERICAL SOLUTIONS OF ELECTRO-OSMOTIC NEWTONIAN/NON-NEWTONIAN FLUID FLOWS." In 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-0937.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Khare, Prashant, and Vigor Yang. "Breakup of non-Newtonian Liquid Droplets." In 44th AIAA Fluid Dynamics Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2014. http://dx.doi.org/10.2514/6.2014-2919.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sirait, Sarah Violita, Tulus, and Mardiningsih. "Heat transfer in non-Newtonian fluid." In 2ND INTERNATIONAL CONFERENCE ON ADVANCED INFORMATION SCIENTIFIC DEVELOPMENT (ICAISD) 2021: Innovating Scientific Learning for Deep Communication. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0133901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Šedivý, Dominik, Simona Fialová, and Darina Jašíková. "Flow of Newtonian and non-Newtonian fluid through pipe with flexible wall." In 37TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS. Author(s), 2018. http://dx.doi.org/10.1063/1.5049922.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Baumert, H. Z., and B. Wessling. "TURBULENT MIXING IN NON-NEWTONIAN DISPERSIONS." In Topical Problems of Fluid Mechanics 2016. Institute of Thermomechanics, AS CR, v.v.i., 2016. http://dx.doi.org/10.14311/tpfm.2016.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vradis, George C. "Heat Transfer and Fluid Mechanics of Herschel-Bulkley Fluids." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0452.

Full text
Abstract:
Abstract A comprehensive review of the heat transfer phenomena related to the flow of purely viscous non-Newtonian fluids exhibiting a yield stress in some simple and complex geometries is presented. Both attached and separated flows of Bingham and Herschel-Bulkley fluids are discussed. The presence of a yield-stress is shown to significantly impact the heat transfer and flow characteristics, as compared to those in the case of a Newtonian fluid, in particular in the cases where separation of the flow would be expected.
APA, Harvard, Vancouver, ISO, and other styles
8

Dominik, Šedivý, Ferfecki Petr, and Fialová Simona. "Force effects on rotor of squeeze film damper using Newtonian and non-Newtonian fluid." In 36TH MEETING OF DEPARTMENTS OF FLUID MECHANICS AND THERMODYNAMICS. Author(s), 2017. http://dx.doi.org/10.1063/1.5004368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Jiangang, and Roger E. Khayat. "Jet Impingement of a Non-Newtonian Fluid." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15993.

Full text
Abstract:
The similarity solutions are presented for the wall flow which is formed when a smooth planar jet of power-law fluids impinges vertically on to a horizontal plate, and spreads out in a thin layer bounded by a hydraulic jump. This problem is formulated analogous to radial jet flow problem and the solution procedure is accounted for by means of similarity solution of the boundary-layer equation [1] for Newtonian fluids. For the convenience of analysis, the flow may be divided into three regions, namely a developing boundary-layer region, a fully viscous boundary-layer region, and a hydraulic jump region. The similarity solutions of the film thickness and free surface velocity in fully viscous boundary-layer region include unknown constant L, which is solved numerically and approximately in the developing boundary-layer flow region. Comparison between the numerical and approximate solutions leads generally to good agreement, except for severely shear-thinning fluids. The boundary-layer solution depends on two parameters: power-law index n and α, the dimensionless flow parameters. The effect of α on film thickness and free surface velocity is investigated. The relations between the position of the hydraulic jump and dimensionless flow parameter are obtained and the effect of α on the position of the jump is presented.
APA, Harvard, Vancouver, ISO, and other styles
10

Aline Abdu, Bruno Fonseca, Hannah A. Pinho, Monica Feijó Naccache, and Paulo R. de Souza Mendes. "Non-Newtonian Fluid displacement in annular space." In 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil: ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-2065.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Newtonian Fluid"

1

Wu, Yu Shu. Theoretical Studies of Non-Newtonian and Newtonian Fluid Flowthrough Porous Media. Office of Scientific and Technical Information (OSTI), February 1990. http://dx.doi.org/10.2172/917318.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Yu-Shu. Theoretical studies of non-Newtonian and Newtonian fluid flow through porous media. Office of Scientific and Technical Information (OSTI), February 1990. http://dx.doi.org/10.2172/7189244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nohel, J. A., R. L. Pego, and A. E. Tzavaras. Stability of Discontinuous Shearing Motions of a Non-Newtonian Fluid. Fort Belvoir, VA: Defense Technical Information Center, July 1989. http://dx.doi.org/10.21236/ada210643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cloutman, L. A Note on Differencing the Viscous Dissipation Terms for a Newtonian Fluid. Office of Scientific and Technical Information (OSTI), May 2001. http://dx.doi.org/10.2172/15005563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Balmforth, NeiI J., and John Hinch. Conceptual Models of the Climate 2003 Program of Study: Non-Newtonian Geophysical Fluid Dynamics. Fort Belvoir, VA: Defense Technical Information Center, February 2004. http://dx.doi.org/10.21236/ada422300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ali, Aamir, Surayya Saba, Saleem Asghar, and Salman Saleem. Thermal and Concentration Effects of Unsteady Flow of Non-Newtonian Fluid over an Oscillating Plate. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, May 2018. http://dx.doi.org/10.7546/crabs.2018.04.04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mansour, A., and N. Chigier. The physics of non-Newtonian liquid slurry atomization. Part 2: Twin-fluid atomization of non-Newtonian liquids -- First quarterly technical report, 1 January--31 March 1994. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/10158834.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Long, Kevin Nicholas, Kurtis Ross Ford, and William M. Scherzinger. Modeling a Newtonian Fluid with a Rate-Dependent, Von Mises Plasticity Model for Solid Mechanics Applications. Office of Scientific and Technical Information (OSTI), March 2015. http://dx.doi.org/10.2172/1177723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, S. R., T. F. Jr Irvine, and G. A. Greene. A computational analysis of natural convection in a vertical channel with a modified power law non-Newtonian fluid. Office of Scientific and Technical Information (OSTI), April 1998. http://dx.doi.org/10.2172/658434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rajagopal, Docotr. Investigations into Swirling Flows of Newtonian and Non-Newtonian Fluids. Fort Belvoir, VA: Defense Technical Information Center, September 1991. http://dx.doi.org/10.21236/ada253298.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Newtonian Fluid' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography