Relevant bibliographies by topics / NewViews

Contents

  1. Journal articles
  2. Books
  3. Conference papers

Academic literature on the topic 'NewViews'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'NewViews.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "NewViews"

1

Alferova, Ekaterina A., and D. V. Lychagin. "Characterization of Deformation Pattern Structure Elements Generated in Uniaxial Compression of Nickel Single Crystals." Applied Mechanics and Materials 379 (August 2013): 66–70. http://dx.doi.org/10.4028/www.scientific.net/amm.379.66.

Full text
Abstract:
Deformation pattern parameters have been studied on the faces of nickel single crystals using microinterferometer NewView 7200. The magnitude of shear displacement in structural elements of the deformation pattern has been determined. As shown, the shear traces transform into accommodation bands, meso- or macrobands as dependent on single crystal orientation with respect to load.
APA, Harvard, Vancouver, ISO, and other styles
2

Filimon, Răzvan V., Roxana M. Filimon, Ancuţa Nechita, Marius M. Băetu, Liliana Rotaru, Cristina Arion, and Antoanela Patraş. "Assessment of quality characteristics of newVitis viniferaL. cultivars for temperate climate vineyards." Acta Agriculturae Scandinavica, Section B — Soil & Plant Science 67, no. 5 (February 8, 2017): 405–15. http://dx.doi.org/10.1080/09064710.2017.1285959.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Guo, Dong Ming, N. Qin, Ren Ke Kang, and Zhu Ji Jin. "Novel Measurement Technique on 3D Surface Topography of Polishing Pad." Advanced Materials Research 53-54 (July 2008): 265–72. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.265.

Full text
Abstract:
Among the properties of polishing pad, the surface roughness plays a crucial role in CMP (Chemical Mechanical Planarization) process. However, there is no acknowledged standard for measuring and characterizing the roughness of pad surface in 3D measurement. In this paper Talysurf CLI 2000 working on the principle of dynamic confocal measurement was initially suggested to measure the 3D surface topography of polishing pads through theoretical and experimental analysis. In addition, based on the Nyquist folding frequency and the statistical theory, a selection technique for sampling interval and sampling area was proposed and verified through experiments. The results showed that Talysurf CLI 2000 is more suitable than NewView to measure the 3D surface topography of polishing pads. 2μm sampling interval, 0.5×0.5mm2 sampling area and 10μm interval, 1×1mm2 area are respectively recommended for IC1000/SubaIV and SubaIV polishing pad.
APA, Harvard, Vancouver, ISO, and other styles
4

Luo, Xi Chun, Ji Ning Sun, Wen Long Chang, and James M. Ritchie. "Single Point Diamond Turning of Calcium Fluoride Optics." Key Engineering Materials 516 (June 2012): 408–13. http://dx.doi.org/10.4028/www.scientific.net/kem.516.408.

Full text
Abstract:
This paper aims to develop a cost-effective diamond turning process to obtain nanosmooth CaF2 optics. Diamond tool wear was also carried out through a number of cutting trials. Three CaF2 specimens (diameter of 50 mm and thickness of 5 mm, crystal orientation of (111)) were diamond turned on an ultra precision lathe (Moore Nanotech 350UPL) by a number of facing cuts. In the cutting trials feed rate varied from 1 μm/rev to 10 μm/rev. White spirit mist was used as the coolant. Cutting forces were measured by a dynamometer (Kistler BA9256). Surface roughness of the CaF2 optics and tool flank wear were measured by a white light interferometer (Zygo Newview 5000) and a scanning electron microscope (FEI Quanta 3D FEG), respectively. It was found that using a feed rate of 1 μm/rev surface roughness Ra of 2 nm could be obtained. When the ratio of the normal cutting force to the tangential cutting force was lower than 1 tool wear would initiate. In diamond turning of calcium fluoride abrasive wear was the main tool wear mechanism. Using white spirit mist as thecoolant could avoid generation of thermal type brittle fracture on the machined CaF2 surfaces.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "NewViews"

1

H, Phillips Robert. Accounting with NewViews. Oakland, CA: Holden-Day, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Student Edition of Newviews 3.5" Version. Not Avail, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yu. Can Dee Jay/Newviews 5.25 Dsk. Irwin, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Denna, Eric L. The student edition of NewViews: The visual approach to accounting, adapted for education. Addison-Wesley, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "NewViews"

1

Lee, Ho J., Bhaskaran Vasudev, and Daniel T. L. Lee. "NEWVIEW: an interactive software environment for digital image processing." In SC - DL tentative, edited by Robert J. Moorhead II and Keith S. Pennington. SPIE, 1990. http://dx.doi.org/10.1117/12.19498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography