Relevant bibliographies by topics / Ni composite

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Ni composite'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ni composite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ni composite"

1

Feng, Chao, Yi Xie та Zhong Wu. "Friction and Wear Properties of α-Al2O3-Coated SiC Particle Reinforced Nickel Matrix Composites Sliding against Bearing Steel". Solid State Phenomena 266 (жовтень 2017): 155–64. http://dx.doi.org/10.4028/www.scientific.net/ssp.266.155.

Full text
Abstract:
In this study, attempt has been made to investigate the effect of SiC particles on the friction and wear properties of Ni/SiC composites manufactured by electrodeposition, especially for the composites with high-temperature treatment.For this purpose, α-Al2O3 was coated on the surfaces of SiC particles by sol-gel technology to inhibit interfacial reaction of SiC and nickel at high temperature. Both of the Ni/α-Al2O3-coated SiC (Ni/CSp) and Ni/uncoated SiC (Ni/UCSp) composites were treated at 600 °C to study the resulting wear behaviour. The results indicated that with heat treatment at 600 °C,
APA, Harvard, Vancouver, ISO, and other styles
2

Ahmad, Nur, Alfan Wijaya, Amri Amri, et al. "Catalytic Oxidative Desulfurization of Dibenzothiophene by Composites Based Ni/Al-Oxide." Science and Technology Indonesia 7, no. 3 (2022): 385–91. http://dx.doi.org/10.26554/sti.2022.7.3.385-391.

Full text
Abstract:
In the present study, composite layer double hydroxide-metal oxide (Ni/Al-TiO2 and Ni/Al-ZnO) was successfully prepared and used as catalyst of oxidative desulfurization of dibenzothiophene. Characterization of catalyst was used XRD, FTIR, and SEM-EDS. The structure of Ni/Al-LDH, TiO2, and ZnO in composite Ni/Al-TiO2 and Ni/Al-ZnO was consistent, which also indicated that the preparation of composite did not change the form of precursors. FTIR spectra of Ni/Al-TiO2 and Ni/Al-ZnO absorption band at 3398, 1639, 1339, 832, 731, and 682 cm−1. The catalysts have an irregular structure, TiO2 and ZnO
APA, Harvard, Vancouver, ISO, and other styles
3

Zygmuntowicz, Justyna, Katarzyna Konopka, Marek Krasnowski, et al. "Characterization of Al2O3 Matrix Composites Fabricated via the Slip Casting Method Using NiAl-Al2O3 Composite Powder." Materials 15, no. 8 (2022): 2920. http://dx.doi.org/10.3390/ma15082920.

Full text
Abstract:
This work aimed to characterize Al2O3 matrix composites fabricated by the slip casting method using NiAl-Al2O3 composite powder as the initial powder. The composite powder, consisting of NiAl + 30 wt.% Al2O3, was obtained by mechanical alloying of Al2O3, Al, and Ni powders. The composite powder was added to the Al2O3 powder to prepare the final powder for the slip casting method. The stained composite samples presented high density. EDX and XRD analyses showed that the sintering process of the samples in an air atmosphere caused the formation of the NiAl2O4 spinel phase. Finally, the phase com
APA, Harvard, Vancouver, ISO, and other styles
4

Murzaev, Ramil T., Karina A. Krylova, and Julia A. Baimova. "Thermal Expansion and Thermal Conductivity of Ni/Graphene Composite: Molecular Dynamics Simulation." Materials 16, no. 10 (2023): 3747. http://dx.doi.org/10.3390/ma16103747.

Full text
Abstract:
In the present work, the thermal conductivity and thermal expansion coefficients of a new morphology of Ni/graphene composites are studied by molecular dynamics. The matrix of the considered composite is crumpled graphene, which is composed of crumpled graphene flakes of 2–4 nm size connected by van der Waals force. Pores of the crumpled graphene matrix were filled with small Ni nanoparticles. Three composite structures with different sizes of Ni nanoparticles (or different Ni content—8, 16, and 24 at.% Ni) were considered. The thermal conductivity of Ni/graphene composite was associated with
APA, Harvard, Vancouver, ISO, and other styles
5

Wijaya, Alfan, Tarmizi Taher, Aldes Lesbani, and Risfidian Mohadi. "Variation of M2+ (Ni and Zn) in Cellulose-based M2+/Cr Composite Materials to Determine Adsorption and Regeneration Abilities on Phenol Removal." Science and Technology Indonesia 7, no. 4 (2022): 461–68. http://dx.doi.org/10.26554/sti.2022.7.4.461-468.

Full text
Abstract:
Cellulose-based Ni/Cr (Ni/Cr-C) and cellulose-based Zn/Cr (Zn/Cr-C) composite materials have been successfully carried out, which is indicated by the XRD, FTIR, and BET analysis. Layered double hydroxide Ni/Cr (Ni/Cr-LDH) increased surface area from 0.128 m2/g to 2.207 m2/g in Ni/Cr-C composites, and layered double hydroxide Zn/Cr (Zn/Cr-LDH) also increased surface area from 0.133 m2/g to 3.714 m2/g in Zn/Cr-C composites. The pHpzc of the material in this study is pH 5.94-8.43, while the optimum pH of all materials is pH 9. Ni/Cr-LDH experienced an increase in adsorption capacity after becomin
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Jeonghyun, Soo-Jin Park, Sungwook Chung, and Seok Kim. "Preparation and Capacitance of Ni Metal Organic Framework/Reduced Graphene Oxide Composites for Supercapacitors as Nanoarchitectonics." Journal of Nanoscience and Nanotechnology 20, no. 5 (2020): 2750–54. http://dx.doi.org/10.1166/jnn.2020.17469.

Full text
Abstract:
We obtained nickel metal organic framework/reduced graphene oxide (Ni-MOF/rGO) composites in the presence of graphene oxide solution using hydrothermal method. The electrochemical performance of the composite was measured by voltammetry and charge–discharge tests. As a result of morphological and structural analysis, Ni-MOF/rGO composite was found to be a composite of cubic structure with good crystallinity and large specific surface area. The Ni-MOF/rGO composite used as the electrode material of the supercapacitor exhibited a high specific capacitance (1154.4 F/g) of 1 A/g in the 6 M KOH and
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Yue, Chuan Zhen Huang, Han Lian Liu, Bin Zou, Peng Yao, and Liang Xu. "Effect of Nano-Additives on Microstructure and Mechanical Properties of Ti(C,N)-TiB2-WC Composite Ceramic Cutting Tool Materials." Key Engineering Materials 589-590 (October 2013): 337–41. http://dx.doi.org/10.4028/www.scientific.net/kem.589-590.337.

Full text
Abstract:
Ti(C,N)-TiB2-WC composite ceramic cutting tool materials with nano-scale additives Ni and Mo, and micro-scale additives Ni and Mo as sintering aids were sintered respectively at a temperature of 1550 °C for holding time of 1hour in vacuum by a hot-press technique. The effects of nano-scale additives Ni and Mo, and micro-scale additives Ni and Mo on microstructure and mechanical properties of composites were compared and investigated. It is concluded that the wettability of nano-scale Ni and Mo to the composites is better than that of micro-scale Ni and Mo. The nano-scale whiskers were found in
APA, Harvard, Vancouver, ISO, and other styles
8

Xing, Ting Yong, Yan Jun Zheng, and Li Shan Cui. "Internal Friction Behaviors of TiNi Shape Memory Alloy Fiber/Ni Matrix Composite." Materials Science Forum 546-549 (May 2007): 1637–42. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.1637.

Full text
Abstract:
The objective of present work is to investigate the internal friction behavior of TiNi shape memory alloy fiber/Ni matrix composite. The TiNi fiber/Ni matrix composite was fabricated by an electroplating method using TiNi alloy fiber as the cathode and Ni plate as the anode. The internal friction as functions of temperature and strain amplitude was measured respectively. The results showed that the internal friction peaks of the TiNi/Ni matrix composites, which due to the martensitic reverse transformation of the TiNi fiber, broadened with increasing prestrain level. There was a sharp internal
APA, Harvard, Vancouver, ISO, and other styles
9

Zellele, Daniel M., Gulmira Sh Yar-Mukhamedova, and Malgorzata Rutkowska-Gorczyca. "A Review on Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC." Materials 17, no. 23 (2024): 5715. http://dx.doi.org/10.3390/ma17235715.

Full text
Abstract:
Nickel electrodeposition is a widely utilized method for creating thin films on various substrates with various desirable attributes. Recently, there has been a growing interest in developing nickel composite coatings that incorporate additional elements or particles into the nickel matrix to enhance their properties. These composite coatings offer superior corrosion resistance, hardness, tribological, and other functional benefits compared with pure nickel coatings. Some of the recent advancements in electrodeposited nickel composite coatings include improved wear resistance, enhanced mechani
APA, Harvard, Vancouver, ISO, and other styles
10

Makarava, Iryna, Mohammadamin Esmaeili, Dzmitry S. Kharytonau, et al. "Influence of CeO2 and TiO2 Particles on Physicochemical Properties of Composite Nickel Coatings Electrodeposited at Ambient Temperature." Materials 15, no. 16 (2022): 5550. http://dx.doi.org/10.3390/ma15165550.

Full text
Abstract:
The Ni-TiO2 and Ni-CeO2 composite coatings with varying hydrophilic/hydrophobic characteristics were fabricated by the electrodeposition method from a tartrate electrolyte at ambient temperature. To meet the requirements of tight regulation by the European Chemicals Agency classifying H3BO3 as a substance of very high concern, Rochelle salt was utilized as a buffer solution instead. The novelty of this study was to implement a simple one-step galvanostatic electrodeposition from the low-temperature electrolyte based on a greener buffer compared to traditionally used, aiming to obtain new types
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Ni composite"

1

Sadeghi, Amir. "Microstructure evolution and strengthening mechanism in Ni-based composite coatings." Doctoral thesis, Universitätsbibliothek Chemnitz, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-211837.

Full text
Abstract:
Ni electrodeposition is a suitable process for producing thick deposits and thick metallic microstructures, especially for producing relatively deep micromoulds in Microsystems industry. Ni-P deposits, due to their better properties compared to Ni deposits – particularly high mechanical properties (hardness, wear resistivity), corrosion resistance, magnetic properties, a higher fatigue limit and lower macroscopic deformation – can be a very good alternative for producing Microsystems, especially for MEMS or Microengines. According to few limited literature and our primary investigations, disp
APA, Harvard, Vancouver, ISO, and other styles
2

Daloz, William. "Developing a high temperature, oxidation resistant molybdenum-silica composite." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/54375.

Full text
Abstract:
A new powder processing approach to produce oxidation resistant molybdenum alloys for high temperature use has been developed. Oxidation protection is provided by fine dispersion of silica glass particles within a molybdenum matrix. As the molybdenum oxidizes, the glass is exposed and melts to form a self-healing protective oxide coating. Additionally, homogeneously dispersed Mo5SiB2 and/or Mo2B provide boria upon oxidation which reduces glass viscosity and allows flowing glass to coat the surface while remaining solid internally. This is similar to the oxidation protection used in Mo-3Si-1B (
APA, Harvard, Vancouver, ISO, and other styles
3

Wood, Ryan C. "PROCESSING AND CHARACTERIZATION OF NANO-SIZE TiC-Cu-Ni COMPOSITES." OpenSIUC, 2015. https://opensiuc.lib.siu.edu/theses/1744.

Full text
Abstract:
Metal carbides have attracted much attention over the past several years due to their unique qualities. The purpose of this research is to develop a cermet that demonstrates desired properties of nano-size titanium carbide (TiC) and copper-nickel (Cu-Ni) metals. In this study stoichiometric, nano-size TiC was synthesized through a patented carbothermal synthesis process (U.S. Patent No.: 5,417,952). The resulting TiC was sintered with varying copper (12.5-37.5wt %) and nickel (12.5-25wt %) contents. Hardness, fracture toughness, and microscopy studies were performed. Average hardness rang
APA, Harvard, Vancouver, ISO, and other styles
4

Torgerson, Tyler B. "Room and Elevated Temperature Sliding Wear Behavior of Cold Sprayed Ni-WC Composite Coatings." Thesis, University of North Texas, 2018. https://digital.library.unt.edu/ark:/67531/metadc1248400/.

Full text
Abstract:
The tribological properties of cold sprayed Ni-WC metal matrix composite (MMC) coatings were investigated under dry sliding conditions from room temperature (RT) up to 400°C, and during thermal cycling to explore their temperature adaptive friction and wear behavior. Characterization of worn surfaces was conducted using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy to determine the chemical and microstructural evolution during friction testing. Data provided insights into tribo-oxide formation mechanisms controlling friction and wear. It was d
APA, Harvard, Vancouver, ISO, and other styles
5

Sadeghi, Amir [Verfasser], Thomas [Akademischer Betreuer] Lampke, and Andreas [Gutachter] Bund. "Microstructure evolution and strengthening mechanism in Ni-based composite coatings : Microstructure evolution and strengthening mechanism in Ni-based composite coatings / Amir Sadeghi ; Gutachter: Andreas Bund ; Betreuer: Thomas Lampke." Chemnitz : Universitätsbibliothek Chemnitz, 2016. http://d-nb.info/1214377386/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mwita, Wambura Mwiryenyi. "Development and testing an intelligent hybrid polymeric composite beam with healing ability embedded with Ni-Ti shape memory alloy." Thesis, Cape Peninsula University of Technology, 2010. http://hdl.handle.net/20.500.11838/1251.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2010.<br>Hybrid polymeric composites (HPC) are widely used for the design of aerospace, automobile and civil engineering structures. One of the major challenges posed by these materials and structures is their brittle nature. When subjected to impact and dynamic loads, the polymeric composite structures undergo micro cracking. The cracks coalesce, propagate and can lead to catastrophic failure of the material and structures. In this thesis, an intelligent hybrid polymeric composite (IHPC) beam with healing abi
APA, Harvard, Vancouver, ISO, and other styles
7

Kharmachi, Imen. "Elaboration électrochimique des revêtements composites Ni-Co sur l'acier au carbone et étude des propriétés physico-chimique et anticorrosives." Thesis, Besançon, 2016. http://www.theses.fr/2016BESA2072.

Full text
Abstract:
Dans ce travail, l’élaboration des revêtements électrolytiques Ni-Co par régimes continu et pulsé, sur acier ordinaire à partir d’un électrolyte support à faible teneur en nickel,a permis d’améliorer les propriétés physico-chimiques et anti corrosives. Cela a également entraîné la diminution de la toxicité du bain d’électrodéposition. Un plan Doehlert a été exploité afin d’optimiser les différents paramètres d’électrodéposition. D’une part, l’ajout des additifs (hydroquinone, gélatine et des nano-particules TiO2) dans l’électrolyte a un effet remarquable sur les propriétés physiques et chimiqu
APA, Harvard, Vancouver, ISO, and other styles
8

Gou, Jian. "Development and evaluation of NI-P-PTFE based nano-composite coatings for medical devices." Thesis, University of Dundee, 2015. https://discovery.dundee.ac.uk/en/studentTheses/4454574c-4447-48eb-adc7-4ca9874177eb.

Full text
Abstract:
Medical device-associated infections and corrosion behaviour of medical devices always impose considerable inconvenience and distress to patients and place a substantial economic burden on health care systems. The aim of this research is to solve this problem by developing a new coating which can reduce bacterial adhesion and slow down the corrosion behaviour efficiently. In this study, two kinds of Ni-P-PTFE based coatings including Ni-P-PTFE-ZrO2 and Ni-P-PTFE-ZrO2-TiO2 were developed by electroless plating technique. The assays of bacterial adhesion and removal were conducted on nano-compos
APA, Harvard, Vancouver, ISO, and other styles
9

Воронова, А. С., І. М. Іваненко та Ю. М. Романенко. "Електрокаталітичні властивості Ni-, Co-шпінелей та їх композитів". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/52853.

Full text
Abstract:
Чисті Ni-, Co-шпінелі, а також їх композити є актуальним об’єктом досліджень, оскільки вони володіють виключними властивостями і, як наслідок, мають широкий спектр можливостей застосування. Чисті Ni-, Co- шпінелі та їх композити мають розвинену площу поверхні, що є визначальним фактором для їх застосування при створенні нових електродних матеріалів та електрокаталізаторів паливних елементів. Важливим етапом досліджень є встановлення зв’язку між умовами проведення синтезу, структурно-адсорбційними характеристиками отриманих зразків та їх електрокінетичними властивостями.
APA, Harvard, Vancouver, ISO, and other styles
10

Tudela, Montes I. "Novel ultrasound-assisted electrodeposited Ni-based coatings for bearing applications." Thesis, Coventry University, 2015. http://curve.coventry.ac.uk/open/items/d5937c67-9161-4709-8852-fa73c566aa26/1.

Full text
Abstract:
The purpose of the present PhD research project was to evaluate the feasibility of the electrodeposition of novel thin Ni composite coatings with lubricant particles from an additive-free Watts bath and their application as diffusion barrier layers in journal bearings for medium-speed diesel engines. Overall, the main objective was to develop thin Ni composite coatings with the following characteristics: • Improved tribological performance. • Good adhesion properties. • Good ‘anti-diffusion’ performance. Ultrasound was used in the preparation of pure Ni coatings and Ni composite coatings with
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Ni composite"

1

Japan. Kagaku Gijutsuchō. Kenkyū Kaihatsukyoku. Risō hyōmen sōsei ni yoru materiaru intākonekushon no kiban gijutsu ni kansuru kenkyū (dai 1-ki Heisei 2-nen--4-nendo) seika hōkokusho. Kagaku Gijutsuchō Kenkyū Kaihatskyoku, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jisedai Kinzoku Fukugō Zairyō Kenkyū Kaihatsu Kyōkai. "Kōzōyō tainetsu fukugō zairyō no dēta bēsu kōchiku ni kansuru kenkyū" seika hōkokusho. Jisedai Kinzoku Fukugō Zairyō Kenkyū Kaihatsu Kyōkai, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chūshō Kigyō Jigyōdan (Japan). Chūshō Kigyō Daigakkō. Kōkinō zairyō shin kōzō zairyō no riyōjō hitsuyō na shotokusei ni kansuru kenkyū: Shōwa 60-nendo. Chūshō Kigyō Jigyōdan Chūshō Kigyō Daigakkō Chūshō Kigyō Kenkyūjo, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tōkyō Daigaku. Sentan Sozai Kaihatsu Kenkyū Sentā. Sentan sozai kaihatsu kōgaku ni kansuru kenkyū. Tōkyō Daigaku Seisan Gijutsu Kenkyūjo, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bała, Piotr. Stopy z układu Ni-Ta-Al-M o dużym stężeniu węgla: High carbon alloys from the Ni-Ta-Al-M system. Wydawnictwa AGH, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Saitama-ken Gesui Odei Shigen Riyō Suishin Iinkai. Gesui odei shigen riyō ni kansuru chōsa kenkyū hōkokusho. Saitama-ken Gesui Odei Shigen Riyō Suishin Iinkai, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

author, Tang Chun'an, ed. Shui ni ji fu he cai liao gao wen lie hua yu sun shang: Thermal Deterioration and Damage of Cement-based Composites at Elevated Temperatures. Ke xue chu ban she, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lamberterie, Pierre de. Electrode composite hydrure métallique-conducteur protonique cristallisé "Ti₁,₁Ni" H₁,₅ - HUO₂PO₄, 4H₂O (HUP): Réalisation, étude et application. 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Suzuki, Tomoo. Kinzoku ni chokino o kagosuru (Sutearingu shirizu kagaku gijutsu o sendosuru 30-nin). Mita Shuppankai, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cuaderno, Composicion. Cuaderno de Composici�n: Cuaderno de Unicornio Acuarela con Reglas Anchas para ni�as, ni�os, Primaria, Maestro, Maestro, �tiles Escolares, Diario, 8. 5 in X 11 in, 150 P�ginas. Independently Published, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Ni composite"

1

Huang, Y. C., and Wei Hsing Tuan. "Functional Properties of BaTiO3/Ni Composites." In Composite Materials V. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saha, R. K., T. I. Khan, L. B. Glenesk, and I. U. Haq. "Formation of Electrodeposited Ni-Al2 O3 Composite Coatings." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470551523.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mahamood, Rasheedat M., Stephen Akinlabi, T. C. Jen, et al. "Characterisation of Additive Manufactured Ti6Al4V-W–Ni Composite." In Advanced Structured Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-73906-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sahoo, Sujata, Pragyan Senapati, Sisir Mantry, and Harekrushna Sutar. "Characterization of Ni-Based Composite Coating HVOF Process." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1080-5_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhao, Guo Gang, and Fu Ming Deng. "Electroless Plating of Ni-P-CNTs Composite Coating." In High-Performance Ceramics III. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-959-8.1445.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lin, Hong Ming, Giin Shan Chen, and Pee Yew Lee. "Microstructure and Properties of Vacuum Hot-Pressing SiC/ Ti-Cu-Ni-Sn Bulk Metallic Glass Composites." In Composite Materials V. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Murasawa, Go, Viktor Pinneker, Sandra Kauffmann-Weiss, Anja Backen, Sebastian Fähler, and Manfred Kohl. "Intermittent Deformation Behavior in Epitaxial Ni–Mn–Ga Films." In Composite, Hybrid, and Multifunctional Materials, Volume 4. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06992-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Dong Lin, Yun Fang Liu, and Zeng Min Shen. "Microwave Permittivity and Permeability of Ni-Coated Carbon Nanotube / Polymer Composites." In Advances in Composite Materials and Structures. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seino, Y., S. A. Haque, A. Matsuo, Y. Yamamoto, S. Yamada, and H. Hori. "ESR and magnetic measurement of Ni/GaAs composite system." In Springer Proceedings in Physics. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59484-7_198.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bao, Chong Gao, Yi Min Gao, Jian Dong Xing, and Guo Shang Zhang. "Wear Behavior of Plasma Sprayed Ni-WC Composite Coatings." In Key Engineering Materials. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1731.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ni composite"

1

Monteiro, Othon R., Radhika Suresh, Sankaran Murugesan, and Valery Khabashesku. "Corrosion Resistance of Ni-Metal Matrix Composite Coatings: Effect of Microstructure." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09806.

Full text
Abstract:
Abstract Metal matrix composite (MMC) and nanocomposite coatings are being proposed as alternatives to their monolithic counterparts to improve protection against wear in chemically-aggressive environments. Corrosion resistance of MMC coatings is strongly dependent on the coating microstructure, which is affected by the physical and chemical nature of the dispersed particles, as well as the particle concentration. In this paper, we present the results of our tests on the corrosion response of Ni-P MMC coatings with micro-crystalline and nano-crystalline diamond as the dispersed phase. Potentio
APA, Harvard, Vancouver, ISO, and other styles
2

Aole, Dhanashree, Pallav Bhadauria, and V. Hariharan. "Synthesis and Characterization of Nickel –Alumina Dispersion Strengthened Composite by Electrodeposition Method." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09229.

Full text
Abstract:
Abstract Dispersion strengthened Nickel-alumina composite was fabricated by electro-deposition method on a non-metallic substrate with the help of nickel-sulphamate bath. The fine particles of alumina were dispersed and vigorously stirred in the bath in order to get uniformly into the Ni-matrix. The influencing parameters i.e. current density, pH, and temperature of the electrolyte were varied to study the effect on the composite quality. The Ni-alumina dispersion strengthened composite was fabricated by optimizing the parameters like current density, temperature, pH of the electrolyte etc. of
APA, Harvard, Vancouver, ISO, and other styles
3

Chaar, Omar, Ahmad Raza Khan Rana, and George Jarjoura. "Development of Novel Corrosion Resistant Electroless Ni-P Composite Coatings for Pipeline Steel." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17841.

Full text
Abstract:
ABSTRACT This paper describes the deposition of various Ni-P composite coatings over an AISI 1012 steel sample through an electroless coating process. The composite coatings were prepared using various ternary additives namely carbon nanotubes, titanium, and alumina. Coated samples were characterized over alongside surface and cross-sections using energy dispersive spectroscopy. Corrosion behaviors of composite coatings were characterized using potentiodynamic polarization. Mechanical and tribological attributes were evaluated using Vickers hardness and nano-indentation, respectively. Among th
APA, Harvard, Vancouver, ISO, and other styles
4

Verstak, Andrew, Buqian Wang, Viatcheslav Baranovski, and Andrei Beliaev. "Composite Coatings for Elevated Temperature Erosion-Corrosion Protection in Fossil-Fueled Boilers." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98193.

Full text
Abstract:
Abstract Fluidized bed combustors components suffer severe erosion, frequently accomplished by corrosive gases attack at elevated temperatures. The tubes damage rate depends on the boiler design, bed constituents and combustion parameters, however an accelerated metal wastage is usually found in the same specific areas of different boilers. New HVOF sprayed coatings are developed for the tubing erosion-corrosion protection, based on Cr3C2/ Ni-Cr, Cr-Ti-C/ Ni-Cr-Mo, and Al2O3/NiAl composite materials. The Combustion arc Fe-Cr-C coatings were found as an economical solution for relatively low er
APA, Harvard, Vancouver, ISO, and other styles
5

Khemar, Athirah. "The Study on Different Percentages of Nickel (Ni) Addition on Sn0.7Cu Solder Alloy Properties." In Composite Materials. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903636-9.

Full text
Abstract:
Abstract. The rapid development of electronic products has created challenges for designers and manufacturers in selecting the best electronic packaging materials for their products. Among these materials, lead-free solders have emerged as the best replacement for lead-containing solders, despite the fact that their performance still falls short of the original specification. The main of this research is to investigate the effect of Nickel (Ni) addition with different percentages into Sn0.7Cu solder alloy on the intermetallic compound formation (IMC) and growth at the solder joint interface. B
APA, Harvard, Vancouver, ISO, and other styles
6

Smith, Grant, Scott Bardenhagen, and John Nairn. "Mesoscale Modeling of Al/Ni Composites." In 2019 15th Hypervelocity Impact Symposium. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/hvis2019-091.

Full text
Abstract:
Abstract Granular composite formulations involving metal/metal [1,2] (intermetallic) reactions have been investigated for a number of applications. Interfaces between metallic particles have been attributed particular importance due to their ability to form localized hotspots, where the local temperature of the granular composite may significantly exceed the global temperature, leading to a localized reaction initiation that may initiate a global reaction.3 Understanding of the response of metal/metal granular composites to mechanical loading can be greatly facilitated by mesoscale modeling in
APA, Harvard, Vancouver, ISO, and other styles
7

Lee, Y. T. R., M. Shibly, T. Hussain, G. Fisher, and A. McDonald. "Evaluation of Low-Pressure Cold Spray MMC Coatings by Acoustic Emission-Coupled Four-Point Flexural Testing." In ITSC2017, edited by A. Agarwal, G. Bolelli, A. Concustell, et al. DVS Media GmbH, 2017. http://dx.doi.org/10.31399/asm.cp.itsc2017p0985.

Full text
Abstract:
Abstract Low-pressure cold spray has been used as an innovative method to deposit metal matrix composite (MMC) coatings: boron carbide-nickel (B4C-Ni) and tungsten carbide-cobalt-nickel (WC-Co-Ni) composites. The coatings were studied using scanning electron microscopy, X-ray diffraction with Rietveld refinement, and acoustic emission-coupled four-point flexural test. Indentation fracture toughness tests were performed on the WC-Co-Ni coatings, only. The results showed that the composites had reinforcing particle volume fractions of 45.8 ± 0.3 vol.% and 22.7 ± 0.1 vol.% for the WC-Co-Ni and B4
APA, Harvard, Vancouver, ISO, and other styles
8

Songmene, V., T. F. Stephenson, and A. E. M. Warner. "Machinability of Graphitic Silicon Carbide Aluminum Metal Matrix Composite GrA-Ni™." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1152.

Full text
Abstract:
Abstract Metal-Matrix Composites (MMC) are being developed for high wear resistance applications. A new MMC, a graphitic aluminum metal matrix composite consisting of an aluminum matrix reinforced with SiC particles and nickel-coated graphite particles, GrA-Ni™, has been developed by INCO Limited. The addition of nickel-coated graphite to SiC particulate reinforced aluminum plays a similar role to flake graphite in grey cast iron. However, like other MMCs, this composite is demanding in terms of requirements for cutting conditions and cutting tool materials. This paper assesses the machining d
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Xiaomin, Peiqing La, Hailian Chao, and Hui Nan. "Electroless Ni-P-TiO2/Ni-P-SiC Composite Coating�s Corrosion Resistances on Mg2B2O5w/AZ91D Magnesium Matrix Composites." In 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Tao, Melford Sorrell, Kevin W. Kelly, and Evan Ma. "Ni-Al 2 O 3 and Ni-Al composite high-aspect-ratio microstructures." In Micromachining and Microfabrication, edited by Craig R. Friedrich and Yuli Vladimirsky. SPIE, 1998. http://dx.doi.org/10.1117/12.324077.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Ni composite"

1

Susan, Donald, and Arnold R. Marder. DIFFUSION AND HIGH TEMPERATURE OXIDATION OF Ni-Al BASED COMPOSITE COATINGS. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/788093.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Qin, Jiaqian, Yuttanant Boonyongmaneerat, Sarintorn Limpanart, Adisak Thueploy, and Jumpot Wanichsampan. Development of Ni-W-B alloy composite coatings with high hardness and good wear resistance : Research report (completed). Chulalongkorn University, 2016. https://doi.org/10.58837/chula.res.2016.63.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anderson, Iver. Liquid-Phase Diffusion Bonding and the Development of a Cu-Ni/Sn Composite Solder Paste for High Temperature Lead-Free Electrical Connections. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1468948.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Choquette, Stephanie Michele. Liquid-phase diffusion bonding and the development of a Cu-Ni/Sn composite solder paste for high temperature lead-free electrical connections. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1593363.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grummon, D. S., and G. Gottstein. Softening mechanisms and microstructural instabilities during high temperature, low cycle fatigue of Ni, Ni sub 3 Al and their metal matrix composites. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5050198.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Weerasooriya, Tusit, and Paul Moy. High Shear Strain-Rate Behavior of W-Ni-Fe Tungsten Heavy Alloy Composites as a Function of Matrix Volume Fraction. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada353925.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Grummon, D. S. High temperature stability, interface bonding, and mechanical behavior in. beta. -NiAl and Ni sub 3 Al matrix composites with reinforcements modified by ion beam enhanced deposition. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7067772.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Grummon, D. S. High temperature stability, interface bonding, and mechanical behavior in [beta]-NiAl and Ni[sub 3]Al matrix composites with reinforcements modified by ion beam enhanced deposition. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/6583595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Grummon, D. S. High temperature stability, interface bonding, and mechanical behavior in {beta}-NiAl and Ni{sub 3}Al matrix composites with reinforcements modified by ion beam enhanced deposition. Progress report, June 1, 1991--May 31, 1992. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10177689.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Grummon, D. S. High temperature stability, interface bonding, and mechanical behavior in {beta}-NiAl and Ni{sub 3}Al matrix composites with reinforcements modified by ion beam enhanced deposition. Progress summary report, June 1, 1993--May 31, 1994. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10150426.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Ni composite' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography