Relevant bibliographies by topics / Nitridation of Porous GaP

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Nitridation of Porous GaP'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nitridation of Porous GaP.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nitridation of Porous GaP"

1

Park, Dong Soo, Myoung Won Lee, Hai Doo Kim, Young Jo Park, and Yeon Gil Jung. "Fabrication and Properties of Porous RBSN." Key Engineering Materials 287 (June 2005): 277–81. http://dx.doi.org/10.4028/www.scientific.net/kem.287.277.

Full text
Abstract:
Porous silicon nitride was prepared by extrusion of silicon followed by nitridation at 1723 K. PMMA spheres with 20 µm in diameter were employed as the pore-forming precursors. b-silicon nitride whiskers were added to the dough for extrusion and their effect on the properties of porous RBSN were examined. The nitridation rate that was obtained from the weight change of the sample due to the nitridation process was between 75% and 80%. However, XRD patterns of the samples after nitridation had no Si peak. That means the actual nitridation rate of the sample was higher than that obtained from th
APA, Harvard, Vancouver, ISO, and other styles
2

Yokomichi, Haruo, Atsushi Masuda, Yasuto Yonezawa, and Tatsuo Shimizu. "N2-plasma-nitridation effects on porous silicon." Thin Solid Films 281-282 (August 1996): 568–71. http://dx.doi.org/10.1016/0040-6090(96)08717-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, S. G. Prasanna, Nagaraju Kottam, R. Hari Krishna, et al. "Influence of Nitridation on Structural and Photoluminescence Behaviour of CaZrO3:Eu3+ Nanophosphors." Asian Journal of Chemistry 32, no. 6 (2020): 1515–19. http://dx.doi.org/10.14233/ajchem.2020.22586.

Full text
Abstract:
Ca1-xZrO3:xEu3+ (x = 0.05) phosphors have been prepared by using the low temperature solution combustion synthesis. The prepared nano phospors are well characterized by powder X-ray diffraction, scanning electron microscopy, Fourier infrared spectroscopy and transmission electron spectroscopy. PXRD results showed orthorhombic phase and SEM images showed porous agglomerated morphology. Influence of nitridation on structural and photoluminescence properties of the phosphor were investigated for wide range of nitridation time. The photoluminescence (PL) intensity was found to vary with nitridatio
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Jun Qi, Fa Luo, Dong Mei Zhu, and Wan Cheng Zhou. "Microwave Dielectric Property of Porous Silicon Nitride Ceramics." Key Engineering Materials 336-338 (April 2007): 307–9. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.307.

Full text
Abstract:
This paper presents the microwave dielectric property of porous silicon nitride ceramics at a frequency of 9360 MHz, which were fabricated by the nitridation of silicon powder. The porous ceramics with different volume fraction of porosity from 18.6% to 56.2% were produced by adding different amount of the pore-forming agent into the initial silicon powder. Microstructural analysis revealed a dense matrix containing large pores and cavities with needle-shaped and flaky β-Si3N4 grains distributing in it. The results showed that the dielectric constant of the ceramics reduces with the porosity i
APA, Harvard, Vancouver, ISO, and other styles
5

Wong-Sifuentes, Milagros, Makoto Nanko, and Joaquín Lira-Olivares. "Synthesis and Characterization of a Porous Silicon Filter with Si3N4 Whiskers." Defect and Diffusion Forum 289-292 (April 2009): 185–94. http://dx.doi.org/10.4028/www.scientific.net/ddf.289-292.185.

Full text
Abstract:
Removal of fine particles from some gas-product effluents from motors and industries, using filters, is an important subject in the field of public health and environment. In the present work, a porous silicon filter was produced, which is able to capture most of the particles undesirable for the environment (transported by gases), larger than the pore diameter (micrometer) of the filter and even smaller size particles. The development of whiskers inside of the pores of the silicon filter, improve its ability to catch smaller particles than the filter’s size pores. Those whiskers are made of S
APA, Harvard, Vancouver, ISO, and other styles
6

Peng, Zhao Yang, Yi Yu Wang, Hua Jun Shen, et al. "Re-Investigation of SiC/SiO2 Interface Passivation by Nitrogen Annealing." Materials Science Forum 897 (May 2017): 335–39. http://dx.doi.org/10.4028/www.scientific.net/msf.897.335.

Full text
Abstract:
Effect of nitrogen annealing on SiC/SiO2 interface properties was comparatively investigated for SiC MOS capacitors. Interface properties were characterized by normalized parallel conductance and interface state density value, and dielectric strength was evaluated by the electric-field-to-breakdown (Ebd). The results exhibited that both fast and slow states were present at the nitrogen-annealed samples’ parallel conductance characteristics. Thus, we could conclude that nitrogen annealing led to incomplete nitridation of SiC/SiO2 interface. Based on the results, nitridation mechanism was simply
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Shi Jie, Li Sha Zhang, Jun Lei Zhang, et al. "Electrospun Porous Ta3N5 Nanorods with Enhanced Visible Light Photocatalytic Activity." Advanced Materials Research 955-959 (June 2014): 84–87. http://dx.doi.org/10.4028/www.scientific.net/amr.955-959.84.

Full text
Abstract:
In this study, porous Ta3N5 nanorods were sucessfully fabricated via electrospinning-calcination-nitridation method. The porous Ta3N5 nanorods are composed of Ta3N5 nanoparticles with diameters ranging from 30 nm to 80 nm. The porous Ta3N5 nanorods show significantly enhanced photocatalytic activity for the degradation of Methyl blue (MB) under visible light than commercial Ta3N5. Importantly, The porous Ta3N5 nanorods can be used as an easily recyclable photocatalyst with wide visible-light response.
APA, Harvard, Vancouver, ISO, and other styles
8

Naddaf, M., S. S. Hullavarad, V. Ganesan, and S. V. Bhoraskar. "Nitridation of porous GaAs by an ECR ammonia plasma." Plasma Sources Science and Technology 15, no. 1 (2005): 33–36. http://dx.doi.org/10.1088/0963-0252/15/1/005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yao, Dongxu, Yongfeng Xia, Kai-hui Zuo, et al. "Porous Si3N4 ceramics prepared via partial nitridation and SHS." Journal of the European Ceramic Society 33, no. 2 (2013): 371–74. http://dx.doi.org/10.1016/j.jeurceramsoc.2012.08.033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morazzani, V., J. L. Cantin, C. Ortega, et al. "Thermal nitridation of p-type porous silicon in ammonia." Thin Solid Films 276, no. 1-2 (1996): 32–35. http://dx.doi.org/10.1016/0040-6090(95)08043-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nitridation of Porous GaP"

1

Zbyryn, E. M. "Properties of GaN Films Obtained by Nitridation of Porous GaP (001)." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34882.

Full text
Abstract:
With the help of nitridation of porous GaP (001) in nitrogen plasma thin films of cubic-GaN were obtained. The conclusion was made that the quality of the GaN films is dependent on the degree of porosity of the GaP substrate. XPS spectra were used to investigate the chemical composition of porous GaP substrates, obtained by electrochemical etching. From XPS measurement we determined that the annealing in atomic nitrogen leads to the formation of GaN films. X-ray diffraction measurements show that cubic GaN on porous GaP substrate has no tensile strain When you are citing the document, use
APA, Harvard, Vancouver, ISO, and other styles
2

Garrepally, Sandeep. "Scission of polymers in extensional flows, bridging the gap between single contraction and porous mediaux." Electronic Thesis or Diss., Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLS003.

Full text
Abstract:
L'épuisement des réserves de pétrole et l'augmentation des besoins énergétiques des forces démographiques croissantes,nécessitent d'optimiser les méthodes de récupération du pétrole. L'une de ces méthodes dans l'injection de polymère avec des solutions de polymère viscoélastique est une technique de récupération d'huile améliorée chimique (EOR). L'efficacité de la récupération d'huile par injection de polymère est fortement limitée par la dégradation mécanique et chimique des polymères. Dans notre travail, nous parvenons à prédire la dégradation des polymères lorsqu'ils sont injectés à travers
APA, Harvard, Vancouver, ISO, and other styles
3

Hu, Youxin. "Effects of alendronate-immobilized calcium phosphate coating on bone growth into porous tantalum : a gap model animal study." Thesis, University of British Columbia, 2007. http://hdl.handle.net/2429/32756.

Full text
Abstract:
Porous tantalum has been shown to be a promising orthopaedic implant material because of its similarity to bone in both mechanical properties and its three-dimensional porous structure. However, in some circumstances, bone quality or quantity is insufficient to allow adequate bone ingrowth. Alendronate, one of the bisphosphonate families, affects the activities of bone cells and enhances bone formation. In this thesis, we hypothesized that the addition of alendronate could increase the osteoconductivity and bone-ingrowth of porous tantalum and overcome the challenges of bone-implant gaps
APA, Harvard, Vancouver, ISO, and other styles
4

Morgenroth, Justin. "The Effect of Porous Concrete Paving on Underlying Soil Conditions and Growth of Platanus orientalis." Thesis, University of Canterbury. School of Forestry, 2010. http://hdl.handle.net/10092/5112.

Full text
Abstract:
Urbanisation is characterised by mass migration of people to urban areas and conversion of land from rural to urban land uses. Changes in population dynamics have led to half the world’s population living in urban areas; in developed countries, urban dwellers account for three-quarters of the total population. Though populations have shifted from rural to urban areas, people continue to rely on their environment, and trees in particular, for tangible and intangible benefits alike. A great deal of factual and anecdotal knowledge supports the role of trees for ecological, social, and economic
APA, Harvard, Vancouver, ISO, and other styles
5

Ben, Khalifa Sana. "Elaboration d'hétérostructures d'InN/InP et de semi-conducteurs III-V poreux : caractérisations physico-chimique, optique et électrique." Phd thesis, Université Blaise Pascal - Clermont-Ferrand II, 2008. http://tel.archives-ouvertes.fr/tel-00730963.

Full text
Abstract:
Nous avons élaboré des structures de quatre couches d'InN/InP (100) en enrichissant en In la surface nitrurée à l'aide d'une cellule d'évaporation calibrée. Les propriétés physiques de ces structures ont été étudiées in-situ à l'aide de spectroscopie, des électrons Auger (AES), des photoélectrons X (XPS) et UV (UPS) avant d'être analysées ex-situ par photoluminescence (PL) et mesures électriques (I(V) et C(V)). Nous avons mené une étude de PL en fonction de la température et l'évolution de l'énergie du pic de PL obtenue en fonction de la température suivait la forme en S-inversé caractéristiqu
APA, Harvard, Vancouver, ISO, and other styles
6

Machala, David. "Vývoj nového samonosného zateplovacího systému s ohledem na dynamické namáhání." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226705.

Full text
Abstract:
This diploma thesis deals with suggestion of self-supporting insulating system that can be used for objects which insulating is more or less complicated. In this thesis are theoretically processed information about insulation systems while focus is on their structure, composition and principle of operation. Further, there is theoretically designed self-supporting insulating system which is practically built after theoretically composed testing for finding its basic properties. The most appropriate process of realization is formulated at the end after evaluation of the individual tests.
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Jun-pin, and 汪峻平. "Evaluation of Gap Aggregate Gradation on Porous Asphalt Concrete." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/86547014983696298652.

Full text
Abstract:
碩士<br>國立成功大學<br>土木工程學系碩博士班<br>96<br>The objectives of this study is to investigate the effects of aggregate gradation on the engineering properties and pavement performance of asphalt concrete by changing aggregate gradation and deleting the aggregate sieves number. Setting the aggregate gradation by deleting aggregate sieves number to form a gap gradation. The attempt gradation deletes 3/4”, 1/2”, 3/8”, #4, #8, #16, and #200 sieves. The occupying proportional is deleted by size distribution to other sizes. The PMA3 was used as binder in this study. These mixtures were designed by the Japanese
APA, Harvard, Vancouver, ISO, and other styles
8

Ya-ChiShen and 沈雅琦. "Morphological Characterization of Porous GaP Prepared by Electrochemical Etching." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/51986998691757093681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tran, Tuan. "Synthesis of Germanium-Tin Alloys by Ion Implantation and Pulsed Laser Melting: Towards a Group IV Direct Band Gap Semiconductor." Phd thesis, 2017. http://hdl.handle.net/1885/131126.

Full text
Abstract:
The germanium-tin (Ge1-xSnx) material system is expected to be a direct bandgap group IV semiconductor at a Sn content of 6.5−11 𝑎𝑡.%. Hence there has been much interest in preparing such alloys since they are compatible with silicon and they raise the possibility of integrating photonics functionality into silicon circuitry. However, the maximum solid solubility of Sn in Ge is around 0.5 𝑎𝑡.% and non-equilibrium deposition techniques such as molecular beam epitaxy or chemical vapour deposition have been used to achieve the desired high Sn concentrations. In this PhD work, the combination of
APA, Harvard, Vancouver, ISO, and other styles
10

(9525965), Yashwant S. Yogi. "ENERGY EFFICIENCY AND FLUX ENHANCEMENT IN MEMBRANE DISTILLATION SYSTEM USING NOVEL CONDENSING SURFACES." Thesis, 2020.

Find full text
Abstract:
<p>The water crisis is increasing with every passing day due to climate change and increase in demand. Different desalination methods have been developed over the years to overcome this shortage of water. Reverse Osmosis is the most widely used desalination technology, but cannot treat many fouling-prone and high salinity water sources. A new desalination technology, Membrane distillation (MD), has the potential to purify wastewater as well as highly saline water up to a very high purity. It is a thermal energy-driven desalination method, which can operate on low temperature waste heat sources
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nitridation of Porous GaP"

1

Pech-Canul, M. I., and J. C. Flores-Garcia. "Processing of Nitride Porous Ceramic Composites via Hybrid Precursor System Chemical Vapor Deposition (HYSYCVD)/Direct Nitridation (DN)." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144442.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kozma, M. "Load Carrying Capacity of Heavy-Duty Porous Journal Bearings." In Fundamentals of Tribology and Bridging the Gap Between the Macro- and Micro/Nanoscales. Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-0736-8_65.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tan, Yuxiang, Weizhuo Shi, Bo Li, and Yung-Tsang Chen. "Effects of Superabsorbent Polymers and Natural Zeolite on the Properties and Pore Structure of Ultra-High-Performance Concretes." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_28.

Full text
Abstract:
AbstractUltra-high-performance concrete (UHPC) often faces challenges due to its low water-to-binder ratio. In this case, cement particles will be unable to fully hydrate, resulting in a high degree of initial dimensional instability. As a promising solution, superabsorbent polymers (SAP) and natural zeolite have potential in mitigating shrinkage and achieving self-stressing properties. Despite prior research on strength, shrinkage, and hydration of UHPC, no systematic study has examined the effects of SAP and natural zeolite on porosity and pore structure. To address this gap, a holistic test
APA, Harvard, Vancouver, ISO, and other styles
4

Chen, X., D. Uttamchandani, D. Sander, and K. P. O'Donnell. "Luminescence decay of porous silicon." In Wide-Band-Gap Semiconductors. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-81573-6.50098-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vial, J. C., S. Billat, A. Bsiesy, et al. "Bright visible light emission from electro-oxidized porous silicon." In Wide-Band-Gap Semiconductors. Elsevier, 1993. http://dx.doi.org/10.1016/b978-0-444-81573-6.50097-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, T., S. Hsu, and B. Wang. "Considering air compressibility in analyzing gap pressure in the partially porous aerostatic journal bearing." In Advanced Materials and Structural Engineering. CRC Press, 2016. http://dx.doi.org/10.1201/b20958-30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rivera-Batiz, Luis A., and Maria-A. Oliva. "Migration and Foreign Investment." In International Trade. Oxford University PressOxford, 2004. http://dx.doi.org/10.1093/oso/9780198297116.003.0005.

Full text
Abstract:
Abstract The large and growing share of the foreign-born population in industrialized countries has triggered a heated debate on the determinants and impact of immigration. In many OECD countries, foreign-born workers exceed 5 percent of the labor force and this level has been increasing (OECD, 1999). A large earnings gap between developed and developing countries, demographic factors such as low fertility and shrinking developed country population, low transportation costs and porous borders suggest that immigration pressures are likely to remain high. An enlarging European Union faces immigr
APA, Harvard, Vancouver, ISO, and other styles
8

Vignal, Leïla. "Borders and the Fragmentation of the Nation State." In War-Torn. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780197619988.003.0003.

Full text
Abstract:
The chapter analyses how the Syrian national territory was progressively broken up into multiple local territories and divided along political and military lines (internal fronts) over the course of the conflict. This internal fragmentation fuelled the emergence of local experiments in alternative governance and the development of competing legitimacies. The fragmentation of the state’s territorial and cohesive continuity was duplicated at its borders, whose nature and management were thereby profoundly transformed. Although these borders are fragmented and porous, they paradoxically embody, f
APA, Harvard, Vancouver, ISO, and other styles
9

Khemakhem, Sabeur. "Preparation and Evaluation of Hydrophobic Grafted Ceramic Membrane: For Application in Water Desalination." In Wastewater Treatment. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104899.

Full text
Abstract:
A new inorganic hydrophobic porous membrane was prepared and applied in desalination with the air-gap membrane distillation process. Ceramic supports from low-cost natural Tunisian sand have been elaborated by the extrusion method. The microfiltration layer has been elaborated from ZrO2 powder by slip casting technical using a solution of water, sand powder, and polyvinyl alcohol solution. The hydrophobic surface of the active layer was elaborated by grafting 1H,1H,2H,2H-perfluorodecyltriethoxysilane on the ceramic microfiltration membrane surface (Tunisian Sand/Zirconia), to prepare a hydroph
APA, Harvard, Vancouver, ISO, and other styles
10

Santoso, Muhammad A., Eirik Christensen, Hafiz M. F. Amin, et al. "GAMBUT field experiment of peatland wildfires in Sumatra: infrared measurements of smouldering spread rate." In Advances in Forest Fire Research 2022. Imprensa da Universidade de Coimbra, 2022. http://dx.doi.org/10.14195/978-989-26-2298-9_133.

Full text
Abstract:
Peatland wildfires present challenge to the mitigation of climate change due to the large amount of ancient carbon emission. Once ignited, the organic soils in peatland can burn for a long periods (weeks to months) and are difficult to extinguish. Peat fire is governed by smouldering combustion which is the slow, low temperature, flameless burning of charring porous fuel, and the most persistent type of combustion phenomena. The detection and monitoring of peatland wildfires are often conducted by remote sensing like satellite. However, there is currently a missing gap between spread of peat f
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nitridation of Porous GaP"

1

Dudziak, T., E. Rząd, A. Polkowska, et al. "Steam Oxidation Resistance in a Long Term Exposure of the Modified Laser Powder Bed Fusion 699XA Alloy at High Temperature." In AM-EPRI 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0171.

Full text
Abstract:
Abstract This study investigates the steam oxidation behavior of Alloy 699 XA, a material containing 30 wt.% chromium and 2 wt.% aluminum that forms protective oxide scales in low-oxygen conditions. The research compares four variants of the alloy: conventional bulk material, a laser powder bed fusion (LPBF) additively manufactured version, and two modified compositions. The modified versions include MAC-UN-699-G, optimized for gamma-prime precipitation, and MAC-ISIN-699, which underwent in-situ internal nitridation during powder atomization. All variants were subjected to steam oxidation test
APA, Harvard, Vancouver, ISO, and other styles
2

Sakulanda, Chizembi, and Thokozani Majozi. "On Optimisation of Operating Conditions for Maximum Hydrogen Storage in Metal Hydrides." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.138071.

Full text
Abstract:
The climate crisis continues to grow as an existential threat. Establishing reliable energy resources that are renewable and zero-carbon emitting is a critical endeavour. Hydrogen has emerged as one such critical resource due to its high gravimetric energy density and near-abundant availability. However, it suffers from low volumetric energy density and is incredibly challenging to store and transport. The metal hydride, a solid-state storage method, provides a viable solution to the current limitations. Storage is achieved through the chemical absorption of hydrogen into a porous metal alloy�
APA, Harvard, Vancouver, ISO, and other styles
3

Pessina, Daniele, Jorge Calderon de Anda, Claire Heffernan, et al. "Model-based approach to template-induced macromolecule crystallisation." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.131246.

Full text
Abstract:
Biomacromolecules have intricate crystallisation behaviour due to their size and many interactions in solution and can often only crystallise in narrow ranges of experimental conditions. High solute concentrations are needed for crystal nucleation and growth, exceeding those eluted upstream and therefore preventing the adoption of crystallisation in downstream separation steps. By promoting molecular aggregation and nucleation via a lowered energy barrier, heterogeneous surfaces or templates can relax the supersaturation requirements and widen the crystallisation operating space. Though templa
APA, Harvard, Vancouver, ISO, and other styles
4

Fukumoto, M., M. Yamada, T. Yasui, and K. Takahashi. "Fabrication of Aluminum Nitride Coating by Reactive RF Plasma Spray Process." In ITSC2004, edited by Basil R. Marple and Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p0606.

Full text
Abstract:
Abstract Aluminum nitride (AlN) is one of the attractive ceramics applicable to the surface modification because of its excellent properties in chemical stability and thermal conductivity. In this research AlN coating was fabricated by reactive RF (Radio Frequency) plasma spray process, a kind of thermal spraying techniques. Reactive plasma spraying, in which metal element reacts with surrounding active species in plasma, has been considered to be an useful process for the formation of non-oxide ceramics thick coatings. By increasing nitrogen content in plasma gas, AlN coating without pure Al
APA, Harvard, Vancouver, ISO, and other styles
5

Vasiliev, Alexander. "Role of Zirconium Nitride Formation Under Zirconium-Based Claddings Oxidation in Air During NPP Beyond-Design-Basis Accidents." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-31186.

Full text
Abstract:
The high-temperature (≈800–2100°K) oxidation of nuclear reactor fuel assembly zirconium-based claddings in the air behaves in different way compared to oxidation in the steam. First, the heat effect of the chemical reaction of oxidation in the air is approximately two times larger than in the steam. Second, the kinetics of oxidation in the air is non-parabolic (approximately linear, that is more strong) in contrast to parabolic kinetics of oxidation in the steam. Third, important factor is the diffusion of oxygen and nitrogen atoms through very porous (transparent) nitride layers formed in α-Z
APA, Harvard, Vancouver, ISO, and other styles
6

Ootomo, Shin-Ya, Tamotsu Hashizume, and Hideki Hasegawa. "Nitridation of GaP Surfaces by Rf Nitrogen Radicals and by ECR Nitrogen Plasma." In 1999 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 1999. http://dx.doi.org/10.7567/ssdm.1999.c-2-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ricci, Pier Carlo, Alberto Anedda, C. M. Carbonaro, F. Clemente, and R. Corpino. "Surface morphology of electrochemically etched porous GaP." In International Symposium on Optical Science and Technology, edited by Zeno Gaburro. SPIE, 2002. http://dx.doi.org/10.1117/12.451980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Obraztsov, A. N., V. A. Karavanskii, and V. Yu Timoshenko. "Photoluminescence and Raman Scattering of Porous GaP." In 1994 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 1994. http://dx.doi.org/10.7567/ssdm.1994.pc-3-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Karavanskii, V. A., Evangelos Anastassakis, Y. S. Raptis, V. N. Sokolov, I. M. Tiginyanu, and V. V. Ursaki. "Observation of surface phonon mode in porous GaP." In ALT '95 International Conference: Advanced Materials for Optics and Optoelectronics, edited by Alexander M. Prokhorov and Vladimir I. Pustovoy. SPIE, 1996. http://dx.doi.org/10.1117/12.232222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Goyal, Amit, Hemant Sankar Dutta, and Suchandan Pal. "Porous Multilayer Photonic Band Gap Structure For Optical Sensing." In International Conference on Fibre Optics and Photonics. OSA, 2016. http://dx.doi.org/10.1364/photonics.2016.tu4a.12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nitridation of Porous GaP"

1

Hammouti, A., S. Larmagnat, C. Rivard, and D. Pham Van Bang. Use of CT-scan images to build geomaterial 3D pore network representation in preparation for numerical simulations of fluid flow and heat transfer, Quebec. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331502.

Full text
Abstract:
Non-intrusive techniques such as medical CT-Scan or micro-CT allow the definition of 3D connected pore networks in porous materials, such as sedimentary rocks or concrete. The definition of these networks is a key step towards the evaluation of fluid flow and heat transfer in energy resource (e.g., hydrocarbon and geothermal reservoirs) and CO2 sequestration research projects. As material heterogeneities play a role at all scales (from micro- to project-scale), numerical models represent a powerful tool for bridging the gap between small-scale measurements provided by X-ray imaging techniques
APA, Harvard, Vancouver, ISO, and other styles
2

Snyder, Victor A., Dani Or, Amos Hadas, and S. Assouline. Characterization of Post-Tillage Soil Fragmentation and Rejoining Affecting Soil Pore Space Evolution and Transport Properties. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7580670.bard.

Full text
Abstract:
Tillage modifies soil structure, altering conditions for plant growth and transport processes through the soil. However, the resulting loose structure is unstable and susceptible to collapse due to aggregate fragmentation during wetting and drying cycles, and coalescense of moist aggregates by internal capillary forces and external compactive stresses. Presently, limited understanding of these complex processes often leads to consideration of the soil plow layer as a static porous medium. With the purpose of filling some of this knowledge gap, the objectives of this Project were to: 1) Identif
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nitridation of Porous GaP' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography