Relevant bibliographies by topics / Non oxyde ceramic

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Non oxyde ceramic'

Author: Grafiati
Published: 15 February 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Non oxyde ceramic.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Non oxyde ceramic"

1

Martinelli, Antonio E., Rubens M. Nascimento, Tarcisio E. de Andrade, et al. "Wetting Oxide and Non-Oxide Ceramics with Active Metals." Materials Science Forum 730-732 (November 2012): 164–69. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.164.

Full text
Abstract:
Brazing has been used to join structural ceramics to devices mostly manufactured using metal alloys. Direct brazing employs filler alloys containing an active metal, usually Ti, to wet the ceramic substrate. However, the cost of active filler alloys is usually around 10 times higher than that of active metal-free alloys. In addition, the concentration of the active metal is usually small, thus limiting the formation of a continuous reaction layer onto the entire ceramic surface. Alternatively, ceramic substrates can be previously metallized and fully coated with an active element to be wetted
APA, Harvard, Vancouver, ISO, and other styles
2

Gao, Xiong, Jingyi Chen, Xiaotong Chen, Wenqing Wang, Zengchan Li, and Rujie He. "How to Improve the Curing Ability during the Vat Photopolymerization 3D Printing of Non-Oxide Ceramics: A Review." Materials 17, no. 11 (2024): 2626. http://dx.doi.org/10.3390/ma17112626.

Full text
Abstract:
Vat photopolymerization (VP), as an additive manufacturing process, has experienced significant growth due to its high manufacturing precision and excellent surface quality. This method enables the fabrication of intricate shapes and structures while mitigating the machining challenges associated with non-oxide ceramics, which are known for their high hardness and brittleness. Consequently, the VP process of non-oxide ceramics has emerged as a focal point in additive manufacturing research areas. However, the absorption, refraction, and reflection of ultraviolet light by non-oxide ceramic part
APA, Harvard, Vancouver, ISO, and other styles
3

Kusunose, Takafumi, and Tohru Sekino. "Non-Oxide Ceramic Nanocomposites with Multifunctionality." Key Engineering Materials 403 (December 2008): 45–48. http://dx.doi.org/10.4028/www.scientific.net/kem.403.45.

Full text
Abstract:
Two types of Aluminum nitride (AlN) based ceramic nanocomposite with multifunctionality were investigated to improve machinability or electrical conductivity of AlN ceramics with high thermal conductivity. The AlN/BN nanocomposite was fabricated by hot-pressing AlN-BN composite powder, which was prepared by reducing and heating AlN particles containing a mixture of boric acid, urea and carbon. The nanocomposite containing 20 vol.% BN showed high strength, good machinability and relatively high thermal conductivity. On the other hand, the sintered AlN ceramics with CeO2 as an additive indicated
APA, Harvard, Vancouver, ISO, and other styles
4

Karadimas, George, and Konstantinos Salonitis. "Ceramic Matrix Composites for Aero Engine Applications—A Review." Applied Sciences 13, no. 5 (2023): 3017. http://dx.doi.org/10.3390/app13053017.

Full text
Abstract:
Ceramic matrix materials have attracted great attention from researchers and industry due to their material properties. When used in engineering systems, and especially in aero-engine applications, they can result in reduced weight, higher temperature capability, and/or reduced cooling needs, each of which increases efficiency. This is where high-temperature ceramics have made considerable progress, and ceramic matrix composites (CMCs) are in the foreground. CMCs are classified into non-oxide and oxide-based ones. Both families have material types that have a high potential for use in high-tem
APA, Harvard, Vancouver, ISO, and other styles
5

Böttcher, Maike, Daisy Nestler, Jonas Stiller, and Lothar Kroll. "Injection Moulding of Oxide Ceramic Matrix Composites: Comparing Two Feedstocks." Key Engineering Materials 809 (June 2019): 140–47. http://dx.doi.org/10.4028/www.scientific.net/kem.809.140.

Full text
Abstract:
Ceramic materials are suitable for use in the high temperature range. Oxide ceramics, in particular, have a high potential for long-term applications under thermal cycling and oxidising atmosphere. However, monolithic oxide ceramics are unsuitable for use in high-temperature technical applications because of their brittleness. Thin-walled, oxidation resistant, and high-temperature resistant materials can be developed by reinforcing oxide ceramics with ceramic fibres such as alumina fibres. The increase of the mechanical stability of the composites in comparison to the non-fibre reinforced mate
APA, Harvard, Vancouver, ISO, and other styles
6

Mitomo, Mamoru, and Günter Petzow. "Recent Progress in Silicon Nitride and Silicon Carbide Ceramics." MRS Bulletin 20, no. 2 (1995): 19–22. http://dx.doi.org/10.1557/s0883769400049162.

Full text
Abstract:
We know from experience that ceramic materials are brittle and easily broken. This is one reason why ceramics have not been used as engineering materials. Fracture is the result of crack growth through the microstructure. It was Griffith who proposed that ceramics have intrinsic cracks which grow under applied stress. The concentration of the applied stress at the crack tip decreases the strength to a level of about 1% or less of the theoretical strength. If the crack starts to grow, strength decreases so sharply that a catastrophic fracture occurs.In spite of the brittle nature of ceramics, t
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Ruzhuan, Dingyu Li, and Weiguo Li. "Temperature dependence of hardness prediction for high-temperature structural ceramics and their composites." Nanotechnology Reviews 10, no. 1 (2021): 586–95. http://dx.doi.org/10.1515/ntrev-2021-0041.

Full text
Abstract:
Abstract Hardness is one of the important mechanical properties of high-temperature structural ceramics and their composites. In spite of the extensive use of the materials in high-temperature applications, there are few theoretical models for analyzing their temperature-dependent hardness. To fill this gap in the available literature, this work is focused on developing novel theoretical models for the temperature dependence of the hardness of the ceramics and their composites. The proposed model is just expressed in terms of some basic material parameters including Young’s modulus, melting po
APA, Harvard, Vancouver, ISO, and other styles
8

Silvestre, J., N. Silvestre, and J. de Brito. "An Overview on the Improvement of Mechanical Properties of Ceramics Nanocomposites." Journal of Nanomaterials 2015 (2015): 1–13. http://dx.doi.org/10.1155/2015/106494.

Full text
Abstract:
Due to their prominent properties (mechanical, stiffness, strength, thermal stability), ceramic composite materials (CMC) have been widely applied in automotive, industrial and aerospace engineering, as well as in biomedical and electronic devices. Because monolithic ceramics exhibit brittle behaviour and low electrical conductivity, CMCs have been greatly improved in the last decade. CMCs are produced from ceramic fibres embedded in a ceramic matrix, for which several ceramic materials (oxide or non-oxide) are used for the fibres and the matrix. Due to the large diversity of available fibres,
APA, Harvard, Vancouver, ISO, and other styles
9

Galusek, D., Z. Lencés, P. Sajgalík, and Ralf Riedel. "Thermal analysis study of polymer-to-ceramic conversion of organosilicon precursors." Journal of Mining and Metallurgy, Section B: Metallurgy 44, no. 1 (2008): 35–38. http://dx.doi.org/10.2298/jmmb0801035g.

Full text
Abstract:
The organosilicon precursors attract significant attention as substances, which upon heating in inert or reactive atmosphere convert directly to oxide or non-oxide ceramics, like nitrides, carbides, carbonitrides, boroncarbonitrides, oxycarbides, alons, etc. In characterisation, and in study of conversion of these polymers to ceramics thermal analysis plays an important role. The degree of cross-linking of the polymer vital for achievement of high ceramic yield is estimated with the use of thermal mechanical analysis (TMA). Decomposition of polymers and their conversion to ceramics is studied
APA, Harvard, Vancouver, ISO, and other styles
10

Bao, X. Y., Song Li, Xiao Xia Tang, and Yue Zhang. "Synthesis of Si-N-C Ceramic Composites by Pyrolysis of Polysilazane and Polycarbosilane." Key Engineering Materials 512-515 (June 2012): 306–9. http://dx.doi.org/10.4028/www.scientific.net/kem.512-515.306.

Full text
Abstract:
Non-oxide ceramics derived from organo-elemental precursors in the system Si-N-C has attracted much attention for its excellent properties. Typically, the Si-N-C ceramic shows homogeneous elemental distribution, better high-temperature stability and oxidation resistance which making them attractive for applying in various branches of technology. A novel amorphous ceramic is fabricated from precursors mixed by polysilazane (PSZ) and polycarbosilane (PCS). The Si-N-C ceramics (PSZ/PCS=2 (w/w)) are heat-treated between 1200°C and 1500°C in nitrogen to crystallization of microcrystalline α-Si3N4 a
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Non oxyde ceramic"

1

Schlienger, Sébastien. "Nouvelles voies de synthèses de carbones et céramiques non-oxydes à porosités contrôlées." Thesis, Mulhouse, 2011. http://www.theses.fr/2011MULH5991.

Full text
Abstract:
Les matériaux nanoporeux (méso- et/ou micro-poreux) visent des applications en relation avec les phénomènes d’adsorption tels que la catalyse, la dépollution, le stockage de gaz ou d’énergie,… Récemment, différents types de synthèses ont donc été développés pour contrôler la porosité et l’adapter aux applications visées : synthèse par voie directe, procédé de nanomoulage, technique de réplication réactive. Pour la très grande majorité d’entre elles, elles servent à l’élaboration des matériaux oxydes méso- et micro-poreuses. L’objectif de ce travail de thèse a donc été d’étendre ces procédés à
APA, Harvard, Vancouver, ISO, and other styles
2

Ben, Miled Marwan. "Synthèse in situ de nanoparticules métalliques dans une matrice céramique dérivées de polymères précéramiques pour l'électrolyse de l'eau en milieu alcalin." Electronic Thesis or Diss., Limoges, 2024. http://www.theses.fr/2024LIMO0083.

Full text
Abstract:
Face au réchauffement climatique dû aux activités humaines et à l’utilisation de ressources fossiles, le besoin de trouver de nouvelles sources d’énergies décarbonées devient urgent. Le dihydrogène (H2) communément appelé « hydrogène » s’impose comme un vecteur énergétique d’intérêt de par sa capacité à produire une énergie de combustion supérieure à celle des énergies fossiles et à ne produire que de l’eau comme déchet lors de son utilisation dans une pile à combustible. De plus, son utilisation ne génère aucune nuisance sonore à la différence des moteurs thermiques couramment employés. Néanm
APA, Harvard, Vancouver, ISO, and other styles
3

Tao, Ming. "Proprietes electriques du joint de grains de la ceramique a base d'oxyde de zinc : application aux varistances basse-tension." Toulouse 3, 1987. http://www.theses.fr/1987TOU30249.

Full text
Abstract:
A l'aide d'une methode originale de microsoudure par ultra-sons, nous placons un fil-electrode de part et d'autre d'un joint de grains, permettant ainsi d'effectuer toutes les etudes experimentales de ce dernier. En se basant sur les differentes caracteristiques i(v) mesurees de plusieurs joints, nous proposons 3 modeles de simulation relatifs a la caracteristique i(v) globale d'une varistance. Les calculs mettent en evidence l'influence du pourcentage optimal de "bons joints" sur les proprietes electriques (coefficient de non-linearite, courant de fuite, tension de seuil, regime de saturation
APA, Harvard, Vancouver, ISO, and other styles
4

Seron, Alain. "Synthèse ß'-SiAlON par hydrogéno réduction nitrurante : application à l'élaboration de films sur des composites thermostructuraux." Orléans, 1993. http://www.theses.fr/1993ORLE2035.

Full text
Abstract:
Bien que les composites carbones représentent une avancée technologique notoire dans le domaine des matériaux thermostructuraux, leur utilisation reste limitée par une forte réactivité en atmosphère oxygénée. L'objectif de cette étude était donc de revêtir la surface de tels composites d'une couche de céramique capable de s'opposer à la diffusion des composes oxygénés vers les sites actifs. La méthode choisie consiste en un dépôt, sur les pièces à revêtir, d'un réactif en suspension ou en milieu sol-gel, suivi d'une étape de céramisation. De part leurs propriétés physico-chimiques, les ß'-SiAl
APA, Harvard, Vancouver, ISO, and other styles
5

Gasse, Adrien. "Rôle des interfaces dans le brasage non réactif du SiC par les siliciures de Co et de Cu." Grenoble INPG, 1996. http://www.theses.fr/1996INPG0114.

Full text
Abstract:
Nous avons etudie le mouillage et le brasage refractaire non reactif du sic par les siliciures non reactifs de co et de cu. La cinetique d'etalement du siliciure de cu sur le sic est controlee par la desoxydation de l'alliage liquide et du sic, que ce soit sous vide secondaire ou sous argon. Dans ce dernier cas, un phenomene de demouillage est observe lors du refroidissement du a la reoxydation du sic. Avec des siliciures de co, les temperatures elevees utilisees permettent une desoxydation rapide et aucun demouillage n'est observe. Le bon mouillage des alliages co-si sur le sic temoigne de fo
APA, Harvard, Vancouver, ISO, and other styles
6

Fayeulle, Dominique. "Elaboration et étude de révêtements céramiques à sous-couche d'accrochage cellulaire pour la protection chimique et thermique de composants de turbomachines." Paris, ENMP, 1989. http://www.theses.fr/1989ENMP0149.

Full text
Abstract:
Etude d'un nouveau procédé de fabrication des barrières thermiques fondé sur le dépôt électrophorétique d'une couche métallique (nicraly+ta) pour obtenir des sous-couches d'accrochage par aluminisation en phase vapeur avant la réalisation des barrières thermiques par projection plasma de zircone partiellement stabilisée. On analyse les propriétés des produits réalisés par ce procédé et leur potentiel d'application pour la protection des composants de turbomachines
APA, Harvard, Vancouver, ISO, and other styles
7

Hassine, Nabile. "Microwave-assisted synthesis of non-oxide ceramic powders." Thesis, University of Nottingham, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240494.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bras, François. "Étude et modélisation de l'endommagement des composites stratifiés SIC-SIC : exploitation d'essais statiques et de type Hopkinson." Cachan, Ecole normale supérieure, 1996. http://www.theses.fr/1996DENS0012.

Full text
Abstract:
La connaissance du comportement dynamique de composites stratifies sic-sic sous sollicitations dynamiques est utile pour dimensionner certaines protections balistiques. Tout d'abord, nous avons choisi, dans ce travail de modélisation et d'identification du comportement, l'échelle mésoscopique du pli orthotrope sic-sic, qui présente l'intérêt de décrire de façon relativement simple les mécanismes de dégradation dans le plan du stratifie, le délaminage n'étant pas aborde. Le comportement du pli élémentaire est étudié au moyen de la mécanique de l'endommagement, avec l'utilisation d'un endommagem
APA, Harvard, Vancouver, ISO, and other styles
9

Ashley, Nicholas J. "Defect Properties of Binary Non-Oxide Ceramics." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.520879.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mansour, Rabih. "Mode I Interlaminar Fracture Properties of Oxide and Non-Oxide Ceramic Matrix Composites." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1494248628194216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Non oxyde ceramic"

1

Stuart, Hampshire, and Commission of the European Communities., eds. Non-oxide technical and engineering ceramics. Elsevier Applied Science, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Martin, Jansen, ed. High performance non-oxide ceramics. Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hampshire, Stuart, ed. Non-Oxide Technical and Engineering Ceramics. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3423-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jansen, Martin, ed. High Performance Non-Oxide Ceramics II. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-45623-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Stuart, Hampshire. Non-Oxide Technical and Engineering Ceramics. Springer Netherlands, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Zhenkun, and Laner Wu. Phase Equilibria Diagrams of High Temperature Non-oxide Ceramics. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0463-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Müller, E., M. Jansen, F. Aldinger, et al. High Performance Non-Oxide Ceramics I. Springer, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

ühauf, S., M. Jansen, F. Aldinger, and U. Herzog. High Performance Non-Oxide Ceramics I. Springer London, Limited, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

(Contributor), R. Haubner, M. Herrmann (Contributor), B. Lux (Contributor), et al., eds. High Performance Non-Oxide Ceramics II (Structure and Bonding). Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

(Contributor), F. Aldinger, S. Frühauf (Contributor), U. Herzog (Contributor), et al., eds. High Performance Non-Oxide Ceramics I (Structure and Bonding). Springer, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Non oxyde ceramic"

1

Knoch, Heinrich. "Non-Oxide Technical Ceramics." In 2nd European Symposium on Engineering Ceramics. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1105-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kusunose, Takafumi, and Tohru Sekino. "Non-Oxide Ceramic Nanocomposites with Multifunctionality." In SiAlONs and Non-oxides. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908454-00-x.45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mühlratzer, August, and Martin Leuchs. "Applications of Non-Oxide CMCs." In High Temperature Ceramic Matrix Composites. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527605622.ch46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Jinlong, and Yong Huang. "Gelcasting of Non-oxide Ceramics." In Novel Colloidal Forming of Ceramics. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1872-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kalemtas, A., Gürsoy Arslan, and Ferhat Kara. "Pressureless Melt Infiltrated Non-Oxide Ceramic-Metal Composites." In SiAlONs and Non-oxides. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908454-00-x.251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brunner, Dieter G., Gaby Böhm, Friedrich Raether, and Andreas Klimera. "Debindering of Non Oxide Ceramics under Protective Atmosphere." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470909836.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lewis, M. H., S. Mason, and A. Szweda. "Syalon Ceramic for Application at High Temperature and Stress." In Non-Oxide Technical and Engineering Ceramics. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-3423-8_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

McDonnell, L., and E. M. Cashell. "Non-destructive Evaluation of Ceramic Surfaces and Sub-surfaces." In Non-Oxide Technical and Engineering Ceramics. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-3423-8_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huang, Zhenkun, and Laner Wu. "Si3N4 Ceramics Systems." In Phase Equilibria Diagrams of High Temperature Non-oxide Ceramics. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0463-7_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bosković, S., and E. Kostić. "Sintering and some Properties of Si3N4 Based Ceramics." In Non-Oxide Technical and Engineering Ceramics. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-3423-8_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Non oxyde ceramic"

1

Keiser, J. R., J. I. Federer, J. J. Williams, and R. A. Rosenberg. "Evaluation of Ceramic Materials for an Advanced Steam-Methane Reformer." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93239.

Full text
Abstract:
Abstract Four ceramic materials (three silicon carbides and one silicon carbide particle-strengthened alumina composite) were corrosion tested to assess their suitability for application as tubes for a steam-methane reformer. Corrosion tests were conducted in simulated reformer atmospheres at temperatures in the range 595 to 1040°C. The fragmented, non-adherent oxide layer (cristobalite) that formed on SiC ceramics increased in thickness with increasing temperature, steam partial pressure, and exposure time. The SiC-Al2O3 composite also formed a thin reaction zone as SiC particles near the sur
APA, Harvard, Vancouver, ISO, and other styles
2

Sabbir, Md Ahsan, Kingsley Lau, and Dale DeFord. "Assessment of CBPC Coating in Wet Exposure." In SSPC 2016 Greencoat. SSPC, 2016. https://doi.org/10.5006/s2016-00062.

Full text
Abstract:
Abstract The performance of a Chemically Bonded Phosphate Ceramic (CBPC) coating was investigated for marine bridge application. Assessment of possible coating degradation and corrosion development was made by physical and electrochemical techniques. Passive-like conditions developed in the chloride-free solutions and formation of oxide product occurred in the chloride solutions. A large degree of oxide product formation throughout the non-scribed coating exposure surface area, consistent with the large measured corrosion current, was indicative that the ceramic coating had poor barrier coatin
APA, Harvard, Vancouver, ISO, and other styles
3

Hille, Carmen, Wolfgang Lippmann, Marion Herrmann, and Antonio Hurtado. "Non-Oxide Ceramics: Chances for Application in Nuclear Hydrogen Production." In 16th International Conference on Nuclear Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/icone16-48408.

Full text
Abstract:
Research and development are increasingly focusing on the provision and utilization of heat in the high-temperature range above 900 °C, in particular under the aspect of resource-saving energy technologies. On the one hand, the exploitation of the high-temperature range helps to improve the efficiency of energy conversion processes; on the other hand, the provision of high-temperature heat makes it possible to utilize innovative thermochemical processes, which in turn represent environmentally compatible processes. An example to be quoted here is the thermally induced production of hydrogen by
APA, Harvard, Vancouver, ISO, and other styles
4

Lippmann, Wolfgang, Marion Herrmann, Carmen Hille, and Antonio Hurtado. "Laser Joining of Ceramics: A Contribution to High Temperature Range Application of Ceramic Components." In 16th International Conference on Nuclear Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/icone16-48409.

Full text
Abstract:
Non-oxide ceramics, such as silicon carbide (SiC) and silicon nitride (Si3N4), have excellent properties that make the materials interesting for application also in the nuclear sector. Due to their exceptional resistance to high temperatures, aggressive and abrasive media as well as nuclear radiation, the materials seem to be particularly suitable for developments in such fields as high-temperature reactors ((V)HTR) and peripheral systems (e.g. for hydrogen production). To simplify and thus to enable the technical application of these high-tech ceramics, the Dresden University of Technology ha
APA, Harvard, Vancouver, ISO, and other styles
5

Thapa, Juddha, Benjamin T. Chorpening, and Michael P. Buric. "Non-contact temperature Raman measurement in YSZ and alumina ceramics." In Oxide-based Materials and Devices IX, edited by Ferechteh H. Teherani, David C. Look, and David J. Rogers. SPIE, 2018. http://dx.doi.org/10.1117/12.2291944.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Suzuki, M., S. Sodeoka, T. Inoue, and K. Ueno. "Basic Research for Reactive Plasma Spraying of TiO2." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1443.

Full text
Abstract:
Abstract Reactive Plasma Spraying (RPS) is one of several new plasma spray processes. Some findings have been published on this technology, hi these reports, only metal powders, such as Ti, Cr and Si, were used for the fabrication of coatings composed of metal and non-oxide ceramics. When an oxide powder is used for starting materials to fabricate metal or non-ceramic coating, it is important to understand the reduction process of the oxide during spraying as well as the reaction among the powder, plasma and atmospheric gas. In this study, the effects of amounts and kinds of plasma and chamber
APA, Harvard, Vancouver, ISO, and other styles
7

Bao, Y., D. T. Gawne, and T. Zhang. "The Influence of Matrix Phase Viscosity on the Plasma-Spray Deposition of Silicon-Nitride Composite Coatings." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p0263.

Full text
Abstract:
Abstract Non-oxide ceramics, such as silicon nitride, have a unique combination of high strength, toughness, wear resistance, thermal and chemical stability. However, the use of these materials as thick protective coatings on engineering components has been severely restricted by their decomposition behavior. Silicon nitride, for instance, does not melt but decomposes at ~1900oC and so thermal spraying of pure silicon nitride powder is impracticable. A limited amount of research has been carried out on depositing silicon nitride in various metallic or ceramic matrix materials but none have pro
APA, Harvard, Vancouver, ISO, and other styles
8

D'Orazio, Giancarlo, Grace E. Falanga, Zachariah Chazen, Jason Jones, and Sadaf Sobhani. "Non-Oxide Ceramic Additive Manufacturing Processes for Aerospace Applications." In AIAA SCITECH 2023 Forum. American Institute of Aeronautics and Astronautics, 2023. http://dx.doi.org/10.2514/6.2023-0315.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

MacBeth, J. W., M. O. Ten Eyck, and R. W. Ohnsorg. "Non-oxide Ceramics for Advanced Heat Engine Applications." In SAE International Congress and Exposition. SAE International, 1987. http://dx.doi.org/10.4271/870468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, S. K., Shyamalendu M. Bose, S. N. Behera, and B. K. Roul. "Preparation of Non Oxide Ceramics in Thermal Plasma." In MESOSCOPIC, NANOSCOPIC AND MACROSCOPIC MATERIALS: Proceedings of the International Workshop on Mesoscopic, Nanoscopic and Macroscopic Materials (IWMNMM-2008). AIP, 2008. http://dx.doi.org/10.1063/1.3027157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Non oxyde ceramic' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography