To see the other types of publications on this topic, follow the link: Number dividers.

Journal articles on the topic 'Number dividers'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Number dividers.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Rybak, Alexander, Besarion Meskhi, Dmitry Rudoy, et al. "Analysis of multithreaded choke dividers and flow dividers-adders." BIO Web of Conferences 84 (2024): 02027. http://dx.doi.org/10.1051/bioconf/20248402027.

Full text
Abstract:
Hydraulic drives, which for the most part is multi-circuit and branched, are widely used in hydraulic drives of modern mobile equipment and technological equipment. The analysis of the conducted studies has shown that throttle flow dividers, as well as flow dividers-adders, are the most suitable for providing automatic control of multi-circuit systems. Dividers are used to separate one working fluid flow entering the divided into two independent streams with an arbitrary flow ratio independent of loads. If it is necessary to organize a larger number of threads, two-threaded DP and DSP are swit
APA, Harvard, Vancouver, ISO, and other styles
2

Rybak, A. T., A. V. Ivanovskaya, P. P. Batura, and A. Yu Pelipenko. "Synchronization in multi-motor hydromechanical systems." Advanced Engineering Research 21, no. 4 (2022): 337–45. http://dx.doi.org/10.23947/2687-1653-2021-21-4-337-345.

Full text
Abstract:
Introduction. The paper submits the analysis of existing design solutions of flow dividers used to synchronize hydraulic drives of working bodies of technological and mobile machines. The market demands for multithreaded throttle flow dividers without valves with the controlled division ratio, such as multi-axle vehicle chassis, are identified. The objective of the work was to analyze the possibility and rationale for developing a throttle four-way flow divider without valves with sensing elements of the Venturi tube type. The solution should provide the synchronicity of movement (rotation) of
APA, Harvard, Vancouver, ISO, and other styles
3

Anusha, H. Indushree, J. Priyanka, Vani, and L.V. Rajesh. "Intelligent Traffic Control Using Movable Road Divider by IOT." Recent Trends in Control and Converter 6, no. 2 (2023): 9–11. https://doi.org/10.5281/zenodo.8086406.

Full text
Abstract:
<em>The Road Divider is typically used to separate the Road from both incoming and outgoing traffic. This assists in maintaining traffic flow. Generally, there is identical number of ways for both progressing and approaching traffic. This project&#39;s primary objective is to ease traffic congestion in our daily lives. The term &quot;road divider&quot; refers to any device that divides a road to accommodate both incoming and outgoing traffic. This aids in maintaining traffic flow; in most cases, the width of the lanes for both outgoing and inbound traffic is the same. The fixed number of lanes
APA, Harvard, Vancouver, ISO, and other styles
4

Matthews, Eric, Alec Lu, Zhenman Fang, and Lesley Shannon. "Quick-Div: Rethinking Integer Divider Design for FPGA-based Soft-processors." ACM Transactions on Reconfigurable Technology and Systems 15, no. 3 (2022): 1–27. http://dx.doi.org/10.1145/3502492.

Full text
Abstract:
In today’s FPGA-based soft-processors, one of the slowest instructions is integer division. Compared to the low single-digit latency of other arithmetic operations, the fixed 32-cycle latency of radix-2 division is substantially longer. Given that today’s soft-processors typically only implement radix-2 division—if they support hardware division at all—there is significant potential to improve the performance of integer dividers. In this work, we present a set of high-performance, data-dependent, variable-latency integer dividers for FPGA-based soft-processors that we call Quick-Div . We compa
APA, Harvard, Vancouver, ISO, and other styles
5

Zhao, Minxiong, and Jiwei Huang. "Design of a multi-modulus divider with a wide frequency dividing range and low power consumption." Journal of Physics: Conference Series 2524, no. 1 (2023): 012008. http://dx.doi.org/10.1088/1742-6596/2524/1/012008.

Full text
Abstract:
Abstract A method of moduli expansion was presented to address the issue of wrongly altering the divider ratio at the boundary of the modulus expansion when multi-mode dividers (MMD) were utilized in fractional-N phase locked loops (PLLs). The multi-mode frequency divider was designed as the cascade of the 2/3 frequency dividers with an RS control terminal. Compared to traditional methods, only one OR gate is required for each modulus expansion, reducing the chip area. The 2/3 divider was designed using a True Single-Phase Clocked (TSPC) D-trigger structure, and each D-trigger uses a logic con
APA, Harvard, Vancouver, ISO, and other styles
6

Klein, Tobias, Peter Uhlig, Carsten Günner, and Reinhard Kulke. "Substrate-integrated divider networks in LTCC with optimized tolerance / isolation properties for Ka-Band satellite systems." International Symposium on Microelectronics 2014, no. 1 (2014): 000816–19. http://dx.doi.org/10.4071/isom-thp22.

Full text
Abstract:
Low Temperature Cofired Ceramics (LTCC) technology is increasingly used for creating high-rel solutions, especially in class S products deployed in space. Current research, executed by the german and european space agencies, focuses inter alia on new, compact beam forming networks for Ka-band multiple feed per beam antennas. These networks consist of a high number of dividers and must provide a high isolation between neighbouring cells to ensure compliance with frequency plan regulations. While the LTCC process brings a number of advantages, its thick film printing process and the tolerances o
APA, Harvard, Vancouver, ISO, and other styles
7

Wei, Xiaotong, Ying Yang, and Jie Chen. "A Low-Latency Divider Design for Embedded Processors." Sensors 22, no. 7 (2022): 2471. http://dx.doi.org/10.3390/s22072471.

Full text
Abstract:
Division is generally regarded as a low-frequency, high-latency operation in integer operations. Division is also the operation that stalls the processor pipeline most frequently. In order to improve the overall performance of embedded processors, a low-delay divider for embedded processors was designed. Based on the non-restoring algorithm, the divider uses a compound adder to execute addition and subtraction simultaneously and reduces the iteration path delay. By shifting the operands to align the most effective bits, the divider dynamically adjusts the number of iteration cycles to reduce t
APA, Harvard, Vancouver, ISO, and other styles
8

M, Mallikarjuna,. "IOT BASED MOVABLE ROAD DIVIDING SYSTEM." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem30233.

Full text
Abstract:
Road dividers conventionally serve the purpose of segregating traffic on roads into lanes for ongoing and incoming vehicles, facilitating smooth traffic flow. Typically, an equal number of lanes are designated for each direction of traffic. However, static road dividers present a limitation as they do not adapt to varying traffic demands. Our objective is to devise an automated road divider system capable of dynamically adjusting lane allocation, thereby accommodating the prevailing traffic patterns. The potential benefits of such a system include significant savings in time and fuel consumpti
APA, Harvard, Vancouver, ISO, and other styles
9

Tallent, Bret R., L. Matthew Law, Rachel K. Rowe, and Jonathan Lifshitz. "Partial cage division significantly reduces aggressive behavior in male laboratory mice." Laboratory Animals 52, no. 4 (2018): 384–93. http://dx.doi.org/10.1177/0023677217753464.

Full text
Abstract:
Aggression in mice often results in injury leading to unplanned euthanasia or the initiation of protocols to isolate animals, thereby increasing research costs and straining resources. Here, we tested if adding a partial cage divider into existing mouse cages affected aggressive-like behavior in group-housed male mice (18 mice; 3 per cage). Mice were randomly assigned to one of two groups upon arrival to the vivarium: (1) standard cage; (2) cage with a partial cage divider. Behavioral observation over 12 hours were conducted at day one, two, and seven after receipt at the facility in order to
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Jiaqi. "A Study of High Performance Dividers." Applied and Computational Engineering 120, no. 1 (2025): 140–45. https://doi.org/10.54254/2755-2721/2025.19329.

Full text
Abstract:
This paper explores the design of a high performance divider aimed at improving the performance of integer and floating point division operations to enhance the overall performance of the microprocessor. In the field of high-performance computing (HPC) and scientific computing, the design of floating-point divisors is critical because division is one of the most complex operations in floating-point arithmetic. The article firstly introduces the standard and arithmetic rules of floating-point numbers, analyses the basic principles of floating-point division, and compares the advantages and disa
APA, Harvard, Vancouver, ISO, and other styles
11

Uddin, Mohammad Zashim, Abulais Shomrat, Md Siddiq Hasan, Md Robin Khan, Abdur Rahman Fahad, and Md Al Amin. "Evaluation of plant species diversity in the road dividers of Dhaka City." Bangladesh Journal of Plant Taxonomy 28, no. 1 (2021): 141–54. http://dx.doi.org/10.3329/bjpt.v28i1.54214.

Full text
Abstract:
The present study aims to evaluate the present status of plant species diversity in the road dividers of Dhaka city. A total of 90 plant species under 73 genera and 42 families have been recorded from the road dividers of Dhaka city. Analysis showed that among the 90 species, the most abundant plant species in the road divider are Mimusops elengi (Bakul) Polyalthia longifolia (Debdaru), Leucaena leucocephala (Epil-epil), Tabernaemontana divaricata (Togor) and Swietenia mahagoni (Mahagoni). In case of dominant analysis based important value index showed that Mimusops elengi is the top dominant
APA, Harvard, Vancouver, ISO, and other styles
12

Kavitha.D, Sameer Abdul, Ibrahim Abdulla, Afsar, and A. Charan. "IOT Powered Automatic Movable Road Dividers for Adaptive Traffic Management." Recent Trends in Information Technology and its Application 7, no. 3 (2024): 18–25. https://doi.org/10.5281/zenodo.10990016.

Full text
Abstract:
<em>This project focuses on reducing daily traffic conges- tion by evaluating the effectiveness of Road Divider functionality. Traditional Road Dividers are designed with fixed-width lanes for both incoming and ongoing traffic, but as the number of vehicles on the road continues to grow, this approach has become insufficient. Our solution offers a dynamic Road Divider system that can adjust to changing traffic demands, maximizing the use of existing lanes. With this innovative solution, we aim to enhance traffic efficiency, decrease congestion, and foster a more sustain- able urban transportat
APA, Harvard, Vancouver, ISO, and other styles
13

Lehmann, T., F. Hettstedt, and R. Knoechel. "Reconfigurable Wilkinson power dividers with minimum number of switches." Electronics Letters 45, no. 2 (2009): 111. http://dx.doi.org/10.1049/el:20093191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Shivprasad, Lingampally, M. Krishna,, D. Srikar, and P. Keerthi Priya. "MOVABLE ROAD DIVIDER FOR VEHICULAR TRAFFIC CONTROL." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 9, no. 3 (2018): 1275–81. http://dx.doi.org/10.61841/turcomat.v9i3.14480.

Full text
Abstract:
Divider is generically used for dividing the Road for ongoing and incoming traffic.This helps keeping the Flow of traffic; generally there is equal number of lanes for both ongoing and incoming traffic. The problem with Static Road Dividers is that the number of lanes on either side of the road is fixed. Since the resources are limited and population as well as number of cars per family is increasing, there is significant increase in number of cars on roads. This calls for better utilization of existing resources like number of lanes available.&#x0D; Our aim is to formulate a mechanism of auto
APA, Harvard, Vancouver, ISO, and other styles
15

Salem Hesari, Sara, and Jens Bornemann. "Antipodal Vivaldi Antenna Arrays Fed by Substrate Integrated Waveguide Right-Angled Power Dividers." Applied Sciences 8, no. 12 (2018): 2625. http://dx.doi.org/10.3390/app8122625.

Full text
Abstract:
This paper describes a novel feed system for compact antipodal Vivaldi antenna arrays on a single layer of substrate integrated waveguide (SIW) by using SIW H-plane right-angled power dividers. The proposed antenna systems are composed of a Vivaldi array and an H-plane right-angled corner power divider which includes an over-moded waveguide section. Based on the number of antennas in the Vivaldi array, mode converter sections at K-band and Ka-band frequencies are designed, fabricated, and measured when feeding Vivaldi antenna arrays with two, three, and four antennas. Right-angled SIW power di
APA, Harvard, Vancouver, ISO, and other styles
16

SWAMY, Mr L. RANGA, and M. AZAM. "Smart Movable Road Divider for Real-Time Traffic Control and Emergency VehicleManagement." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 04 (2025): 1–9. https://doi.org/10.55041/ijsrem44508.

Full text
Abstract:
In today’s cities, managing traffic efficiently is a growing challenge due to the rising number of vehicles on roads. One major issue is that traditional road dividers are fixed and don’t adapt to traffic conditions, often causing unnecessary congestion. This project presents a smart solution—a movable road divider system that automatically adjusts lane allocation based on real-time traffic flow. Using IR sensors to detect vehicle density and an ESP32 microcontroller to control servo motors, the divider can shift from one lane to another. Additionally, the system offers remote monitoring throu
APA, Harvard, Vancouver, ISO, and other styles
17

Pasternak, Yuri G., Vladimir A. Pendyurin, Dmitry K. Proskurin, and Kirill S. Safonov. "Antenna array of waveguide horns with an E-plane aperture, as well as horns with an aperture in the E- and H-planes." Physics of Wave Processes and Radio Systems 27, no. 2 (2024): 91–99. http://dx.doi.org/10.18469/1810-3189.2024.27.2.91-99.

Full text
Abstract:
Background. Currently, in connection with the conduct of a special military operation, the issue of the availability of inexpensive mobile terminals for high-speed satellite communications of domestic production is very relevant, as well as due to the large extent of the territories of our country, there are a number of areas where cellular communication is absent, for example, the Taiga, the Arctic, the territory of the Arctic Ocean, etc. Therefore, the only possible connection in these territories is satellite communication. Aim. Development of a linear equidistant antenna array with equal a
APA, Harvard, Vancouver, ISO, and other styles
18

Pande, P. B., J. M. Raut, R. M. Bhagat, et al. "An Analysis for the Impact of Vehicles on Composite Road Dividers." AFRICAN JOURNAL OF APPLIED RESEARCH 11, no. 1 (2025): 363–87. https://doi.org/10.26437/ajar.v11i1.853.

Full text
Abstract:
Purpose: This research seeks to tackle the significant number of deaths and injuries resulting from road accidents in India by assessing the shortcomings of conventional concrete road dividers and investigating composite materials as a safer option. Design/Methodology/Approach: Crash simulations were conducted using the ANSYS Workbench software to evaluate the effectiveness of composite road dividers constructed from epoxy, glass fibre, and thermocol. This research examined their stress concentration, deformation, and durability compared to conventional solid and hollow concrete segments at di
APA, Harvard, Vancouver, ISO, and other styles
19

Razzaz, Faroq, Saud Saeed, and Majeed Alkanhal. "Compact Ultra-Wideband Wilkinson Power Dividers Using Linearly Tapered Transmission Lines." Electronics 11, no. 19 (2022): 3080. http://dx.doi.org/10.3390/electronics11193080.

Full text
Abstract:
In this work, compact extended ultra-wideband (UWB) Wilkinson power dividers (WPDs) using tapered transmission lines are analyzed, designed, and measured. Utilizing carefully designed tapered transmission sections results in widening the operational bandwidth and reducing the element dimensions. Analytical models and design procedures of simple and compact and equal and unequal UWB WPDs based on linearly tapered transmission lines are developed and outlined in this paper. Four different configurations of equal and unequal power dividers are designed and presented. The number and locations of t
APA, Harvard, Vancouver, ISO, and other styles
20

A J, Keerthan, Likhith H D, Chetan H S, Kiran K P, and Dr Sumaiya MN. "Automatic Movable Smart Road Dividers - IOT Based Solution to Traffic Congestion Problems." International Journal of Innovative Science and Research Technology 5, no. 6 (2020): 1511–16. http://dx.doi.org/10.38124/ijisrt20jun1024.

Full text
Abstract:
The street dividers are commonly utilized for separating the street for continuous and approaching traffic. This is useful in keeping the progression of traffic. For this situation, there is equal number of lanes for both approaching and continuous traffic. Be that as it may, in certain zones, such as in industrial or shopping zones the traffic for the most part streams a one way in the first part of the morning or night. The other roadside is unfilled or unused. It leads to time loss for public and congested driving conditions. We mean to assemble a shrewd street divider as far as a mechanize
APA, Harvard, Vancouver, ISO, and other styles
21

Batista, Michel. "Acoustic assessment of an open-plan office environment against the newly published ISO 22955 acoustic parameters." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 265, no. 6 (2023): 1916–23. http://dx.doi.org/10.3397/in_2022_0270.

Full text
Abstract:
This paper aims to assess the acoustic performance of an existing open-plan office environment with suspended sound absorbers below a hard reflective ceiling and low workstation dividers against the newly published ISO 22955 acoustic parameters. The room acoustic variables, such as sound absorption, screens between workstations, speech masking sounds and room dimensions all interact in a complex way affecting the values of single-number quantities presented in the ISO 22955 standard. In order to determine the in-situ performance, acoustic measurements were carried out on site. Odeon room acous
APA, Harvard, Vancouver, ISO, and other styles
22

Hao, Muzhen, Xiaodong Liu, Zhizhe Liu, et al. "A Broadband High-speed Programmable Multi-modulus Divider Based on CMOS Process." Journal of Physics: Conference Series 2132, no. 1 (2021): 012046. http://dx.doi.org/10.1088/1742-6596/2132/1/012046.

Full text
Abstract:
Abstract This paper introduces a design of a high-speed programmable multi-modulus divider (MMD) based on 65nm CMOS process. The design adopts the cascade structure of 7 level 2/3 frequency dividers, and expands the frequency division range by adjusting the number of cascade stages, so as to achieve a continuous frequency division ratio of 16 to 255. Among them, the first level 2/3 frequency divider adopts the D flip-flop design of CML (current mode logic) structure, the second level 2/3 frequency divider adopts the D flip-flop design of E-TSPC (extended true-single-phase-clock) structure. The
APA, Harvard, Vancouver, ISO, and other styles
23

Amaricai, Alexandru, Ovidiu Sicoe, and Oana Boncalo. "On the Redundant Representation of Partial Remainders in Radix-4 SRT Dividers." Journal of Circuits, Systems and Computers 26, no. 06 (2017): 1750097. http://dx.doi.org/10.1142/s0218126617500979.

Full text
Abstract:
Most digit-recurrence algorithms for division, such as the Sweeney–Robertson–Tocher (SRT) algorithm, have been used in order to take advantage of the redundant representations of the partial remainder. This way, full carry propagate additions are avoided, obtaining significant latency improvements. Furthermore, the delay corresponding to one division iteration is independent of the size of the operands. The most frequent redundant form for the partial remainders is the carry-save (CS) representation, which uses 2 bits of representation (carry and sum bits) for each bit of the partial remainder
APA, Harvard, Vancouver, ISO, and other styles
24

Sun, Cheng-Guang, Jia-Lin Li, and Baidenger Agyekum Twumasi. "Multi-way differential power divider with microstrip output interfaces." Journal of Electrical Engineering 71, no. 4 (2020): 274–80. http://dx.doi.org/10.2478/jee-2020-0037.

Full text
Abstract:
AbstractThe design and implementation of planar multi-way differential power dividers remain a challenge in terms of the compactness and especially, for the achievable characteristic impedance of the quarter-wavelength transformer when considering large number of outputs. In this work, the double-sided parallel stripline is recommended to realize such a power divider with out-of-phase outputs, and explicit design methods are provided. The proposed multi-way power divider was developed without the use of lump elements on a single substrate. For system applications, a prototype operating at 41.6
APA, Harvard, Vancouver, ISO, and other styles
25

Shen, Tianchen, Jiabing Liu, Chunyi Song, and Zhiwei Xu. "A High-Speed Low-Power Divide-by-3/4 Prescaler using E-TSPC Logic DFFs." Electronics 8, no. 5 (2019): 589. http://dx.doi.org/10.3390/electronics8050589.

Full text
Abstract:
A high-speed, low-power divide-by-3/4 prescaler based on an extended true single-phase clock D-flip flop (E-TSPC DFF) is presented. We added two more transistors and a mode control signal to the conventional E-TSPC based divide-by-4 divider to achieve the function of the divide-by-3/4 dual modulus frequency divider. The designed divide-by-3/4 achieved higher speed and lower power operation with mode control compared with the conventional ones. The prescaler was comprised of sixteen transistors and integrates an inverter in the second DFF to provide output directly. The power consumption was mi
APA, Harvard, Vancouver, ISO, and other styles
26

Desai, Manohar, and Anirban Chowdhury. "Eye-Tracking Analysis of Proposed Signage Design to Prevent Accidents Caused by the Abrupt Appearance of Dividers on Indian Roads." Designs 8, no. 1 (2024): 18. http://dx.doi.org/10.3390/designs8010018.

Full text
Abstract:
The road transport system is expanding considerably in developing countries. Villages are connecting to major cities for business, education, health, and many other reasons because of road development and smooth transportation. There has been a rise in the number of road accidents observed, caused by abruptly appearing dividers on roads and a lack of required signage systems. This paper discusses scenarios of accidents due to such abruptly appearing dividers and offers a strategy to design appropriate signage to avoid road accidents in the future. It has been observed that permanent or movable
APA, Harvard, Vancouver, ISO, and other styles
27

Chodur, Janusz, and Radosław Bąk. "Study of driver behaviour at turbo-roundabouts." Archives of Transport 38, no. 2 (2016): 17–28. http://dx.doi.org/10.5604/08669546.1218790.

Full text
Abstract:
The article presents the results of preliminary research into the behaviour of drivers at turbo-roundabouts. The subject of the research included the frequency of driver behaviour against the traffic rules, and the speed at which vehicles drive through turbo-roundabouts. One of the crucial problems which was analysed was the influence of different kinds of traffic lane division on the behaviour of drivers. The analysis results affirm that the raised lane dividers can visibly improve the propensity of drivers to stay within the designated traffic corridor. However, it does not eliminate the phe
APA, Harvard, Vancouver, ISO, and other styles
28

Yovkochova, Nargiza Abdusattorovna. "METHODOLOGY OF APPLICATION OF CASE TECHNOLOGY IN THE PROCESS OF TEACHING MATHEMATICS." "Science and Innovation" international scientific journal 1, no. 2 (2022): 82–84. https://doi.org/10.5281/zenodo.6558225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Qasem, Sayyedah, Sivasankaran Sivasankaran, Zailan Siri, and Wan Othman. "Effect of thermal radiation on natural conviction of a nanofluid in a square cavity with a solid body." Thermal Science, no. 00 (2020): 182. http://dx.doi.org/10.2298/tsci191003182q.

Full text
Abstract:
This investigation is to concentrate on the effect of thermal radiation on free convection of a Cu-water nanofluid in a differentially heated cavity containing a solid square block placed in the middle. The upper and lower dividers of the cavity are kept as thermally protected; The coupled equations of mass, momentum, and energy are governed the mathematical model. Finite difference method is used to solve the governing equations. All internal surfaces of the cavity are deemed as a diffused emitters and reflectors for radiation. The impacts of relevant parameters, the Rayleigh number (103 ? Ra
APA, Harvard, Vancouver, ISO, and other styles
30

Zhang, Z., C. Kleinstreuer, and C. S. Kim. "Flow Structure and Particle Transport in a Triple Bifurcation Airway Model1." Journal of Fluids Engineering 123, no. 2 (2000): 320–30. http://dx.doi.org/10.1115/1.1359525.

Full text
Abstract:
Considering steady laminar incompressible flow in a triple bifurcation, which represents generations three to six of the human respiratory system, air flow fields and micron-particle transport have been simulated for several combinations of relatively high and low inlet Reynolds and Stokes numbers. While the upstream bifurcations are hardly affected by the third bifurcation, complex air and particle flow fields occur in the daughter tubes leading to the third dividers. Variations in Reynolds number, 500⩽Re⩽2000, and Stokes number, 0.04⩽St⩽0.12, cause locally changing vortical air flows as well
APA, Harvard, Vancouver, ISO, and other styles
31

Nasif, Mohammad Shakir, Ra'fat Al-Waked, and Firas Ismail. "Numerical investigation on the effect of varying the number of flow dividers on Z-shaped membrane heat exchanger performance." Malaysian Journal of Fundamental and Applied Sciences 16, no. 1 (2020): 85–89. http://dx.doi.org/10.11113/mjfas.v16n1.1642.

Full text
Abstract:
To reduce building energy consumption and to improve indoor air quality, it is necessary the use heat recovery such as air-to-air fixed-plates enthalpy heat exchanger in mechanical ventilation. Prediction of enthalpy performance by utilizing CFD simulation is challenging since most commercial software do not simulate moisture transfer. In this research, a Z-shaped membrane heat exchanger which is used for building energy recovery systems was modeled by using commercial CFD software (FLUENT). Kraft paper of 45 gsm was used as the heat exchanger heat and moisture transfer surface. A User Define
APA, Harvard, Vancouver, ISO, and other styles
32

Pratama, Arif, Arif Arizal, and Syariful Alim. "Sound Calculation Simulation System for Distribution of Chair Parliament Using Hare Quota and Sainte Lague Methods." JEECS (Journal of Electrical Engineering and Computer Sciences) 4, no. 2 (2019): 703–10. http://dx.doi.org/10.54732/jeecs.v4i2.114.

Full text
Abstract:
The conversion of the ballot for the division of parliamentary seats has become one of the historical points inthe development of the democratic order in Indonesia. How not, through a plenary session, the DPR RI finally finalizesthe discussion and decision making on the Election Bill proposed by the government. Conversion of votes is one of thecrucial issues to get the word consensus in the House of Representatives, because the method of voting conversionused will greatly determine the acquisition of seats for a political party. For example, if using the quota method, aparty can get 5 seats, b
APA, Harvard, Vancouver, ISO, and other styles
33

., Arshiya. "Intelligent Traffic Control System with Priority to Emergency Vehicles." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (2021): 413–18. http://dx.doi.org/10.22214/ijraset.2021.36340.

Full text
Abstract:
In static road dividers the number of lanes on either side of the road is fixed and cannot be extended. This can be a major problem during peak traffic hours. The situation is abysmal when emergency vehicles are required to wait for other vehicles to give way at traffic intersections. This causes large time delays and may affect the emergency case. These traffic issues faced by emergency vehicles and daily commuters can be avoided by using this proposed traffic control system based on image processing and IoT. As a result, this project successfully analyzes and implements an Intelligent traffi
APA, Harvard, Vancouver, ISO, and other styles
34

Martynova, E. G., S. A. Velichko, and A. V. Martynov. "Micrometric research results of vacuum dough divider components." Vestnik of Don State Technical University 19, no. 3 (2019): 231–41. http://dx.doi.org/10.23947/1992-5980-2019-19-3-231-241.

Full text
Abstract:
Introduction. Nowadays, vacuum-type dough dividers are used in industries with a production volume of up to 4,000 loaves per day. In the dough divider operation, due to wear of the working surfaces of the piston, chamber, and drum, the gap between them goes beyond the value equal to 50 microns, which provides vacuum in the suction chamber. As a result, the suction process becomes unstable; the dough divider disturbs the weight accuracy of bakery goods. Repair of such equipment is carried out mainly through a full or partial replacement of worn parts and assemblies with new ones. To increase th
APA, Harvard, Vancouver, ISO, and other styles
35

Sanjay S Tippannavar, Halesh M R, and Pilimgole Sudarshan Yadav. "Implementation And Comparison of Different Stages of Current Starved CMOS Ring Oscillator – A Study." Journal of Electrical Engineering and Automation 5, no. 3 (2023): 343–61. http://dx.doi.org/10.36548/jeea.2023.3.004.

Full text
Abstract:
The ring oscillators serves as the fundamental building blocks in both digital and analog circuit design, as its extensive use is found in various electrical systems, including phase-locked loops, frequency dividers, and clock generators. This study gives a general overview of the ring oscillator circuit, including its workings, uses, and important design considerations. The ring oscillator generates timing signals for synchronous operation and is often employed as a clock generator in digital systems. It may also be used as a frequency divider to separate higher frequencies into lower ones. A
APA, Harvard, Vancouver, ISO, and other styles
36

Pavlidis, Archimedes, and Dimitris Gizopoulos. "Fast quantum modular exponentiation architecture for Shor's factoring alogrithm." Quantum Information and Computation 14, no. 7&8 (2014): 649–82. http://dx.doi.org/10.26421/qic14.7-8-8.

Full text
Abstract:
We present a novel and efficient, in terms of circuit depth, design for Shor's quantum factorization algorithm. The circuit effectively utilizes a diverse set of adders based on the Quantum Fourier transform (QFT) Draper's adders to build more complex arithmetic blocks: quantum multiplier/accumulators by constants and quantum dividers by constants. These arithmetic blocks are effectively architected into a quantum modular multiplier which is the fundamental block for the modular exponentiation circuit, the most computational intensive part of Shor's algorithm. The proposed modular exponentiati
APA, Harvard, Vancouver, ISO, and other styles
37

Febrianty, Erica, and Ratih Kusumastuti. "The Influence of Liquidity, Profitability, and Asset Growth on Dividend Policy." INVOICE : JURNAL ILMU AKUNTANSI 6, no. 1 (2024): 83–94. https://doi.org/10.26618/inv.v6i1.13172.

Full text
Abstract:
This study aims to determine the effect of liquidity, profitability, asset growth on Dividend Policy in sub-companies of the property and real estate listed in Indonesia Securities in 2018-2021. The independent variable in this study is dividend policy calculated using the divident payout ratio model, and the dependent el variab in this study is liquidity ratio (current ratio), profitability (return on equity), and asset growth (asset growth). Sample determination was carried out by purposive sampling technique with the number of selected samples as many as 11 companies from a population of 67
APA, Harvard, Vancouver, ISO, and other styles
38

Al-Shattarat, Husni K. "The accounting numbers and investment decisions in emerging markets." Corporate Ownership and Control 12, no. 2 (2015): 443–54. http://dx.doi.org/10.22495/cocv12i2c4p4.

Full text
Abstract:
The main objective of this study is to determine the impact of dividend policy on stock price in Kuwait Firms. the study adopts the quantitative technique, gathering data from official listed Kuwaiti companies. All non-financial firms listed in Kuwait Stock Exchange from 1994 to 2003 This study will be based on a cross-sectional regression analysis of the relationship between stock price volatility and dividend policy after controlling for firm size, earning volatility, leverage and asset growth. Both dividend policy measures (dividend yield and payout ratio) have significant impact on the sha
APA, Harvard, Vancouver, ISO, and other styles
39

Maulana, Denindra Surya, Hidayat Hidayat, and Efta Dhartikasari Priyana. "Human Error Analysis on Steelmaking Process to Reduce Product Defect Rate at PT. RAVANA JAYA Using Sherpa and Heart Methods." G-Tech: Jurnal Teknologi Terapan 9, no. 2 (2025): 636–47. https://doi.org/10.70609/gtech.v9i2.6569.

Full text
Abstract:
PT Ravana Jaya is a general contractor that works on steel fabrication and has several partners from small, medium, and large scale companies. Observations show that errors often occur during the production process, leading to a number of defective products with a defect percentage of 0.12%. The allowable defect percentage ranges between 0.05% and 0.07%, or approximately 1-2 items per month. Therefore, research should be conducted to look at the human errors that cause defective products during the production process. This study utilized the Human Error Assessment and Reduction Technique (HEAR
APA, Harvard, Vancouver, ISO, and other styles
40

Jiang, Jiamei, Chen Shao, Henglong Xu, and Khaled A. S. Al-Rasheid. "Morphogenetic observations on the marine ciliate Euplotes vannus during cell division (Protozoa: Ciliophora)." Journal of the Marine Biological Association of the United Kingdom 90, no. 4 (2009): 683–89. http://dx.doi.org/10.1017/s0025315409991342.

Full text
Abstract:
Morphogenetic events during the division of the marine ciliate, Euplotes vannus (Müller, 1786) Diesing, 1850 were investigated using protargol impregnation: (1) the opisthe's oral primordium develops de novo in a subsurface pouch above the marginal cirri; (2) the cirral anlagen for the frontal, ventral and transverse cirri in both dividers develop separately on the surface epi-apokinetally, cirrus I/1 and marginal anlagen for daughter cells are formed de novo separately; (3) the dorsal kinety anlagen occur in a non-typical primary pattern within the parental structures at mid-body, of which th
APA, Harvard, Vancouver, ISO, and other styles
41

Patil, Archana. "Design and Simulation of Clock Divider using VHDL." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33837.

Full text
Abstract:
This paper presents the diesign and simulation of clock divider circuit using VHDL(VHSIC Hardware Description Language) on an FPGA(Field Programmable Gate Array). The clock divider circuit is a fundamental component in digital system for generating lower frequency clocks from a higher frequency reference clock. The paper starts up with simple divider where the clock is divided by even numbers, odd numbers and then later expands it into non- integer dividers. Keywords:- clock divider, D flipflop, FPGA
APA, Harvard, Vancouver, ISO, and other styles
42

Gómez, M. E. "Handling of Microfiche." International Astronomical Union Colloquium 110 (1989): 122. http://dx.doi.org/10.1017/s0252921100003146.

Full text
Abstract:
The microficher received at the Library E.S.O. - La Silla, come from different sources: old journals out of print, articles in current journals which often include microfiche for long tables, catalogs and figures not suitable for normal printing, and larger catalogues of data (IUE, IRAS, etc.). These microfiche, coming either in journals or being a publication themselves, are ordered in the same way: -Every microfiche is assigned a running number.-Three cards are typed: the main one being by author, the second one by title of the article, and the third one by title of the journal. In addition,
APA, Harvard, Vancouver, ISO, and other styles
43

Wackermann, Jiri. "Determinants of filled/empty optical illusion: Differential effects of patterning." Acta Neurobiologiae Experimentalis 72, no. 1 (2012): 89–94. http://dx.doi.org/10.55782/ane-2012-1883.

Full text
Abstract:
A subdivided path in the visual field appears longer than an empty path of the same length. This effect may be attributed to the division of the path into multiple segments, or to an influence of the visual elements used to mark the subdivision, and thus filling-up the estimated space. To address this question, we used two series of stimuli, in which the spatial distribution of the filling optical mater, or the form of the dividers, was varied while the relative coverage of the filled space was kept constant. We found significant dependence of the effect magnitude on a number of filling elemen
APA, Harvard, Vancouver, ISO, and other styles
44

Döbrich, Stefan, and Christian Hochberger. "Exploring Online Synthesis for CGRAs with Specialized Operator Sets." International Journal of Reconfigurable Computing 2011 (2011): 1–22. http://dx.doi.org/10.1155/2011/601986.

Full text
Abstract:
The design of energy-efficient systems has become a major challenge for engineers over the last decade. One way to save energy is to spread out computations in space rather than in time (as traditional processors do). Unfortunately, this requires to design specialized hardware for each application. Also, the nonrecurring expenses for the manufacturing of chips continuously grow. Implementing the computations on FPGAs and CGRAs solves this dilemma, as the non recurring expenses are shared between many different applications. We believe that online synthesis that takes place during the execution
APA, Harvard, Vancouver, ISO, and other styles
45

POIRIER, W., and F. SCHOPFER. "QUANTUM HALL EFFECT AND OHM METROLOGY." International Journal of Modern Physics B 23, no. 12n13 (2009): 2779–89. http://dx.doi.org/10.1142/s0217979209062360.

Full text
Abstract:
The quantum Hall effect (QHE) discovery has revolutionized the ohm metrology: the representation of the unit of resistance is now universal and the ohm can be maintained in each national metrology institute with a relative uncertainty of one part in 109. This breakthrough also results from the development of resistance comparison bridges using cryogenic current comparator (CCC). The fundamental properties of the QHE allow the realization of Quantum Hall Array Resistance Standards (QHARS) by combining a large number of single Hall bars connected in series and/or in parallel. These standards can
APA, Harvard, Vancouver, ISO, and other styles
46

Kuzmych, L. V., D. P. Ornatskyi, and V. P. Kvasnikov. "Simulation of the analogue interface for remote measurements." «System analysis and applied information science», no. 2 (August 28, 2019): 39–47. http://dx.doi.org/10.21122/2309-4923-2019-2-39-47.

Full text
Abstract:
This work is aimed at finding possibilities for increasing the accuracy of measurements and interfering analog interfaces for remote measurements using resistive strain gauges by introducing a new structural scheme, which is shown on the Fig. 1. It shows us the Schematic of the electrical functional analog interface for remote measurement using multiplexer and resistive strain gauges, which contains a measuring chain, a transmitter, the input of which is connected to a DC source through an analog demultiplexer, and the outputs of the measuring chain through the analog multiplexer are connected
APA, Harvard, Vancouver, ISO, and other styles
47

Szurgacz, Dawid, and Jarosław Brodny. "Research on the Effectiveness of the Actuating Element of the Electro Control System for the Powered Roof Support." E3S Web of Conferences 41 (2018): 03016. http://dx.doi.org/10.1051/e3sconf/20184103016.

Full text
Abstract:
The development of high-efficiency longwall complexes in underground mining enforces the introduction of new control systems for the operation of a powered roof support. The most important stage when creating a new control system for a powered longwall system is to determine the time dependencies between the setting off of the function and its actual implementation by the control elements of the control system. Electro hydraulic control of the powered roof support has a number of advantages as compared to the manually operated distributor blocks. The most important are: higher supply pressure,
APA, Harvard, Vancouver, ISO, and other styles
48

Kumar, Vipin, and Ashok Kumar. "Natural convection in an anisotropic porous cavity with internal heat generation." Fluid Dynamics Research 57, no. 3 (2025): 035508. https://doi.org/10.1088/1873-7005/ade005.

Full text
Abstract:
Abstract Present work deals with the study of convective flow inside an anisotropic porous cavity containing internal heat-generating fluid. The motion of the flow is due to the differentially heated side walls and partially divided square cavity (i.e. the partially divided square cavity refers to a rectangular or square enclosure that is partially subdivided by internal walls or dividers), whereas other walls are adiabatic. The non-Darcy model (Brinkman-extended Darcy model) has been adopted to describe the flow governing equations. These coupled equations are solved numerically by using the
APA, Harvard, Vancouver, ISO, and other styles
49

Jakimczuk, Rafael. "Two topics in number theory: the greatest k-free number that divides n and formulas for composite and prime numbers." Gulf Journal of Mathematics 14, no. 1 (2023): 33–44. http://dx.doi.org/10.56947/gjom.v14i1.1089.

Full text
Abstract:
In the first part we study the greatest k-free number that divides n. Consequently, we generalize the kernel of the positive integer n. That is, the greatest square-free number that divides n. In the second part we obtain formulas for composite and prime numbers and prove some inequalities.
APA, Harvard, Vancouver, ISO, and other styles
50

Kim-Thi, Phuong, Thang Nguyen-Van, Dat Nguyen-Tien, and Tung Bui-Thanh. "A compact design of MIMO patch antenna with high gain and symmetrical radiation pattern." PLOS One 20, no. 7 (2025): e0325282. https://doi.org/10.1371/journal.pone.0325282.

Full text
Abstract:
This paper presents a compact design of multiple-input multiple-output (MIMO) microstrip patch antenna with high gain and symmetrical radiation pattern. The proposed antenna consists of dual-polarized crossed patches and T-junction power dividers. This combination makes the proposed design achieve high gain and high isolation with compact size and not requiring any additional decoupling structure. Especially, the use of dual-polarized patch can help to decrease the number of radiating elements while exhibiting high gain radiation. Besides, symmetrical radiation pattern in the broadside directi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!