Log in

Relevant bibliographies by topics / Oblique Parameters / Journal articles

To see the other types of publications on this topic, follow the link: Oblique Parameters.

Journal articles on the topic 'Oblique Parameters'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Oblique Parameters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Maniatis, Markos, and York Schröder. "Constraints on the NMSSM from the Oblique Parameters." Advances in High Energy Physics 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/293205.

Full text

Abstract:

Electroweak precision measurements, encoded in the oblique parameters, give strong constraints on physics beyond the Standard Model. The oblique parametersS,T,U(V,W,X)are calculated in the next-to-minimal supersymmetric model (NMSSM). We outline the calculation of the oblique parameters in terms of one-loop gauge-boson self-energies and find sensitive restrictions for the NMSSM parameter space.

APA, Harvard, Vancouver, ISO, and other styles

2

Kundu, Anirban, and Probir Roy. "A General Treatment of Oblique Parameters." International Journal of Modern Physics A 12, no. 08 (1997): 1511–29. http://dx.doi.org/10.1142/s0217751x97001079.

Full text

Abstract:

A re-examination is made of one-loop oblique electroweak corrections. General definitions are given of the oblique parameters without reference to any q2 expansion scheme. The old oblique parameters S, T and U are defined as differences of gauge boson vacuum polarization Π functions and suffice for describing certain observable ratios on the Z peak and the ρ parameter at q2 = 0. Regarding the new oblique parameters V, W and X, the first two are defined in terms of differences of Π functions as well as the wave function renormalization of the corresponding weak boson, and the third in terms of

APA, Harvard, Vancouver, ISO, and other styles

3

Lavoura, L., and Ling-Fong Li. "Making the small oblique parameters large." Physical Review D 49, no. 3 (1994): 1409–16. http://dx.doi.org/10.1103/physrevd.49.1409.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bhattacharyya, Gautam, and Amitava Raychaudhuri. "Probing exotic leptons through oblique parameters." Physics Letters B 296, no. 3-4 (1992): 448–51. http://dx.doi.org/10.1016/0370-2693(92)91348-d.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yan, Fuyong, Lev Vernik, and De-Hua Han. "Relationships between the anisotropy parameters for transversely isotropic mudrocks." GEOPHYSICS 84, no. 6 (2019): MR195—MR203. http://dx.doi.org/10.1190/geo2019-0088.1.

Full text

Abstract:

Studying the empirical relations between seismic anisotropy parameters is important for the simplification and practical applications of seismic anisotropy. The elastic properties of mudrocks are often described by transverse isotropy. Knowing the elastic properties in the vertical and horizontal directions, a sole oblique anisotropy parameter determines the pattern of variation of the elastic properties of a transversely isotropic (TI) medium in all of the other directions. The oblique seismic anisotropy parameter [Formula: see text], which determines seismic reflection moveout behavior, is i

APA, Harvard, Vancouver, ISO, and other styles

6

Sánchez-Colón, G., and J. Wudka. "Effective operator contributions to the oblique parameters." Physics Letters B 432, no. 3-4 (1998): 383–89. http://dx.doi.org/10.1016/s0370-2693(98)00682-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Burgess, C. P., Stephen Godfrey, Heinz König, David London, and Ivan Maksymyk. "A global fit to extended oblique parameters." Physics Letters B 326, no. 3-4 (1994): 276–81. http://dx.doi.org/10.1016/0370-2693(94)91322-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Lei, Bin Lin, Yu Guo, and Ji Ming Yao. "Optimization of End Mill Geometry Parameters Based on Oblique Cutting Theory." Key Engineering Materials 693 (May 2016): 850–55. http://dx.doi.org/10.4028/www.scientific.net/kem.693.850.

Full text

Abstract:

An optimization method of end mill geometry parameters is presented for minimizing cutting energy. The helical end mill geometry is established at first. Then, the helical flutes are decomposed a set of infinitesimal oblique cutting edges. At every oblique cutting element, the differential cutting energy, which consists of differential shear energy and differential friction energy, is calculated using oblique cutting theory. By integrating the differential cutting energy along each cutting edge in the end mill, the cutting energy can be predicted during end milling. The effects on cutting ener

APA, Harvard, Vancouver, ISO, and other styles

9

Grimus, W., L. Lavoura, O. M. Ogreid, and P. Osland. "The oblique parameters in multi-Higgs-doublet models." Nuclear Physics B 801, no. 1-2 (2008): 81–96. http://dx.doi.org/10.1016/j.nuclphysb.2008.04.019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Amarantov, D. G., M. F. Zarivchatsky, A. A. Alkhamaidkh, O. S. Gudkov, and O. S. Zhuravlev. "Programming of oblique laparotomy optimal parameters when implementing splenectomy." Perm Medical Journal 36, no. 4 (2019): 13–20. http://dx.doi.org/10.17816/pmj36413-20.

Full text

Abstract:

Aim. To develop the method of prediction of the optimal parameters of oblique laparotomy when implementing splenectomy. Materials and methods. The newly developed method was used in treatment of 108 patients, who needed splenectomy. Results. It was detected that the optimal length of laparotomy is 98 % of the revealed with computed tomography distance from the center of splenic portal to the center of laparotomy. The offered method for determining laparotomy sizes was used in 25 open splenectomies. Conclusions. Introduction of the offered method for determining laparotomy siz

APA, Harvard, Vancouver, ISO, and other styles

11

Wang, Ya, Song Chen, and Min Wang. "Digital Research on Oblique Cutting Parameters of Round Broach." Applied Mechanics and Materials 345 (August 2013): 494–97. http://dx.doi.org/10.4028/www.scientific.net/amm.345.494.

Full text

Abstract:

In recently years, researches about round-hole broaching mainly focus on broach macro environment and industry structure. However, researchers study little from technical level. We aim at simplifying broaching process of worm gear round broach into rectangular and oblique cutting process. In the same conditions, we make use of finite element analysis software for stress analysis of two kinds of cutting mode broach, to provide a certain theoretical basis for using tool reasonably and tool parameters optimization design in the production.

APA, Harvard, Vancouver, ISO, and other styles

12

Mahl, C. R. W., and V. Fontanella. "Optimal parameters for lateral oblique radiographs of rat mandibles." Dentomaxillofacial Radiology 37, no. 4 (2008): 224–27. http://dx.doi.org/10.1259/dmfr/32763038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Ma, Yu-Zhen, Xiao-Fang Xia, and Xue-Ren Dong. "Research On The Measure Method Of Oblique Pinhole Parameters." ITM Web of Conferences 7 (2016): 09023. http://dx.doi.org/10.1051/itmconf/20160709023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Hunger, K. "Intermediate Helium Stars: Atmospheric Parameters, Oblique Rotators and Shells." International Astronomical Union Colloquium 87 (1985): 260–76. http://dx.doi.org/10.1017/s0252921100090862.

Full text

Abstract:

Intermediate helium stars are defined bynHe/nH being the number ratio of He over H. The upper bound which separates the intermediates from the extremes is well-defined (see Sect. 7), whereas the lower bound is rather soft.The first intermediate helium star discovered was Sigma Ori E (Greenstein and Wallerstein, 1956). Since then, 23 intermediates with V ≤ 1lm have been found (see the list of Walborn, 1983 and also the Annex), mostly through surveys such as that by McConnell et al. (1970) and McConnell (1972). (To this list, the newly discovered object SB 939, Langhans and Heber, 1985, should b

APA, Harvard, Vancouver, ISO, and other styles

15

Halzen, Francis, Probir Roy, and Mary Louise Stong. "Two-loop versus new physics effects on oblique parameters." Physics Letters B 277, no. 4 (1992): 503–8. http://dx.doi.org/10.1016/0370-2693(92)91818-t.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Homer, E. R., B. L. Adams, and R. H. Wagoner. "Recovering Grain-Boundary Inclination Parameters through Oblique Double Sectioning." Metallurgical and Materials Transactions A 38, no. 7 (2007): 1575–86. http://dx.doi.org/10.1007/s11661-007-9218-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Cohen, Doron, and Reuven Shavit. "Bi-anisotropic Metamaterials Effective Constitutive Parameters Extraction Using Oblique Incidence S-Parameters Method." IEEE Transactions on Antennas and Propagation 63, no. 5 (2015): 2071–78. http://dx.doi.org/10.1109/tap.2015.2405078.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Shamoto, E., and Y. Altıntas. "Prediction of Shear Angle in Oblique Cutting with Maximum Shear Stress and Minimum Energy Principles." Journal of Manufacturing Science and Engineering 121, no. 3 (1999): 399–407. http://dx.doi.org/10.1115/1.2832695.

Full text

Abstract:

A new shear angle prediction theory is proposed for oblique cutting operations. Oblique cutting mechanics are described by two components of shear angle, two angles defining direction of resultant cutting force, and chip flow angle. The five unknown parameters describe the geometry of chip deformation, velocities and forces in oblique cutting. When combined with the material dependent shear stress and average chip—rake face friction coefficient, cutting forces in three Cartesian directions can be predicted. In this paper, the mechanics of oblique cutting are described by five expressions. Thre

APA, Harvard, Vancouver, ISO, and other styles

19

van der Bij, J. J., and Boris Kastening. "Corrections to oblique parameters induced by anomalous vector boson couplings." Physical Review D 57, no. 5 (1998): 2903–26. http://dx.doi.org/10.1103/physrevd.57.2903.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Zhang, Baile, and Bae-Ian Wu. "Cylindrical cloaking at oblique incidence with optimized finite multilayer parameters." Optics Letters 35, no. 16 (2010): 2681. http://dx.doi.org/10.1364/ol.35.002681.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Li, Li, Yanqi Wang, Yundong Bi, and Chunyan Hu. "Parameters Optimization of a Direct Secondary Oblique Shock Wave Nozzle." IOP Conference Series: Earth and Environmental Science 446 (March 21, 2020): 052083. http://dx.doi.org/10.1088/1755-1315/446/5/052083.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Jenny, Bernhard, and Tom Patterson. "Introducing Plan Oblique Relief." Cartographic Perspectives, no. 57 (June 1, 2007): 21–40. http://dx.doi.org/10.14714/cp57.279.

Full text

Abstract:

Plan oblique relief is a new digital technique for rendering three dimensional terrain on otherwise planimetric (conventional flat) maps. Landforms shown realistically in side view have an illustrative quality that appeals to readers. Inspired by the work of manual mapmakers of the past, the paper begins with a historical review that includes maps by Xaver Imfeld of Switzerland, Erwin Raisz of the United States, and Heinrich Berann of Austria. In the next, digital techniques section, the projections and rendering parameters needed to create plan oblique relief receive attention, as does Natura

APA, Harvard, Vancouver, ISO, and other styles

23

Sze Pei, Tan, Siti Nadiah Mohd Saffe,, Siti Aishah Rusdan, and Nurul Nadiah Nor Hamran. "Oblique Impact on Crashworthiness: Review." International Journal of Engineering Technology and Sciences 4, no. 2 (2017): 32–48. http://dx.doi.org/10.15282/ijets.8.2017.1.2.1077.

Full text

Abstract:

This paper reviewed the crashworthiness of foam-filled thin-walled structure subjected to oblique loading conditions. Crashworthiness is the most important part in designing a safety vehicle, so, the types of collisions, crashworthiness parameter and the modes of collapse of structural components are included in this part. Secondly, the energy absorber regarding the axial loading and oblique loading in terms of geometry parameters and materials of the previous research is reviewed. In addition, the manufacturing and properties of aluminium foams with the collapse behavior of foam-filled struct

APA, Harvard, Vancouver, ISO, and other styles

24

Karamanos, Theodosios, Theodoros Zygiridis, and Nikolaos Kantartzis. "Homogenization of 3D metamaterial particle arrays for oblique propagation via a point-dipole analysis." European Physical Journal Applied Physics 91, no. 2 (2020): 20902. http://dx.doi.org/10.1051/epjap/2020190343.

Full text

Abstract:

A rigorous technique for the consistent calculation of the effective parameters of infinite three-dimensional metamaterial particle arrays in the realistic case of oblique wave propagation, is presented in this paper. The extracted polarizabilities of the consisting scatterer and the numerically retrieved wavenumber for the obliquely propagating electromagnetic waves are systematically inserted into a properly modified first-principles homogenization technique, thus leading to the characterization of the effective medium. Finally, the proposed methodology is applied to two popular, anisotropic

APA, Harvard, Vancouver, ISO, and other styles

25

Mulders, Patrick, and Henk Jan Verhagen. "BREAKWATERS UNDER CONSTRUCTION EXPOSED TO OBLIQUE WAVES." Coastal Engineering Proceedings 1, no. 33 (2012): 15. http://dx.doi.org/10.9753/icce.v33.structures.15.

Full text

Abstract:

A new series of physical model tests were conducted to analyse the behaviour of a breakwater core when it becomes exposed to wave attack. The emphasis of this research was on the measured influence of a wide stone grading on both the deformation of a breakwater trunk and the occurring longshore transport. This behaviour was investigated for both head-on and oblique waves using two different wave loads. The findings were compared to the currently available formulas and the validity of these formulas for the tested range of parameters was (re)checked. In general a clear distinction was found in

APA, Harvard, Vancouver, ISO, and other styles

26

Qi, Jiaran, Jinghui Qiu, and Chongzhi Han. "Homogenization Models for a Simple Dielectric-Composite Slab upon Oblique Incidence." International Journal of Antennas and Propagation 2014 (2014): 1–12. http://dx.doi.org/10.1155/2014/787613.

Full text

Abstract:

Four different models are applied to effectively describe a geometrically simple dielectric-composite slab. The corresponding model parameters, when the oblique incidence is taken into account, are retrieved based on the transmission and reflection data and compensated with the nonmagnetic assumption. The scattering parameters of each model with derived parameters for various angles of incidence are then analytically calculated using the forward propagation matrix method and compared with the simulated scattering parameters from the real composite slab. According to these comparisons, it is sh

APA, Harvard, Vancouver, ISO, and other styles

27

Bhattacharyya, G., A. Kundu, T. De, and B. Dutta-Roy. "Effects of isodoublet colour-octet scalar bosons on oblique electroweak parameters." Journal of Physics G: Nuclear and Particle Physics 21, no. 2 (1995): 153–57. http://dx.doi.org/10.1088/0954-3899/21/2/002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Takenaga, K. "The Oblique Parameters in Electroweak Theory with Two Massless Higgs Doublets." Progress of Theoretical Physics 92, no. 5 (1994): 987–95. http://dx.doi.org/10.1143/ptp/92.5.987.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Çobanoǧlu, Özgür, Erkcan Özcan, Saleh Sultansoy, and Gökhan Ünel. "OPUCEM: A library with error checking mechanism for computing oblique parameters." Computer Physics Communications 182, no. 8 (2011): 1732–43. http://dx.doi.org/10.1016/j.cpc.2011.04.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Guo, Hu Sheng, Bing Yan, and Xiang Li. "The Method of Polarization Filter Based on Oblique Projection Operators in Process of Multi-Component Acquired Data." Applied Mechanics and Materials 333-335 (July 2013): 656–60. http://dx.doi.org/10.4028/www.scientific.net/amm.333-335.656.

Full text

Abstract:

Polarization filtering is an effective method to process the ocean bottom multi-component seismic data but distort signal amplitude and phase. To solve this problem, a method of polarization filter based on oblique projection operators (OOPF) in process of ocean bottom multi-component seismic data is proposed in this paper. First, we compute polarization parameters based on singular value decomposition (SVD); secondly, an oblique projecting polarization is construct by polarization parameters, finally, the simulation and experiment data results and indicates that the proposed method effectivel

APA, Harvard, Vancouver, ISO, and other styles

31

Tang, Zhi Tao, Tao Yu, and Li Qiang Xu. "Study on the Effect of Tool Geometrical Parameters on Cutting Forces Based on Finite Element Method." Advanced Materials Research 663 (February 2013): 580–85. http://dx.doi.org/10.4028/www.scientific.net/amr.663.580.

Full text

Abstract:

Based on finite element software DEFORM-3D, a three-dimensional oblique cutting model for aerospace aluminum alloy was built. The material’s flow stress behavior was described with Johnson-Cook constitutive equation. The separation of the chips with the workpiece was realized by the combination of adaptive remeshing technique and separation criterion. The material’s failure was defined by adopting Cockcroft & Latham fracture criterion. The tool-chip friction model was the combination of a Coulomb friction model and shear (sticking) friction model. To validate the finite element model, cutt

APA, Harvard, Vancouver, ISO, and other styles

32

Verykokou, Styliani, and Charalabos Ioannidis. "EXTERIOR ORIENTATION ESTIMATION OF OBLIQUE AERIAL IMAGERY USING VANISHING POINTS." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B3 (June 9, 2016): 123–30. http://dx.doi.org/10.5194/isprsarchives-xli-b3-123-2016.

Full text

Abstract:

In this paper, a methodology for the calculation of rough exterior orientation (EO) parameters of multiple large-scale overlapping oblique aerial images, in the case that GPS/INS information is not available (e.g., for old datasets), is presented. It consists of five main steps; (a) the determination of the overlapping image pairs and the single image in which four ground control points have to be measured; (b) the computation of the transformation parameters from every image to the coordinate reference system; (c) the rough estimation of the camera interior orientation parameters; (d) the est

APA, Harvard, Vancouver, ISO, and other styles

33

Verykokou, Styliani, and Charalabos Ioannidis. "EXTERIOR ORIENTATION ESTIMATION OF OBLIQUE AERIAL IMAGERY USING VANISHING POINTS." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B3 (June 9, 2016): 123–30. http://dx.doi.org/10.5194/isprs-archives-xli-b3-123-2016.

Full text

Abstract:

In this paper, a methodology for the calculation of rough exterior orientation (EO) parameters of multiple large-scale overlapping oblique aerial images, in the case that GPS/INS information is not available (e.g., for old datasets), is presented. It consists of five main steps; (a) the determination of the overlapping image pairs and the single image in which four ground control points have to be measured; (b) the computation of the transformation parameters from every image to the coordinate reference system; (c) the rough estimation of the camera interior orientation parameters; (d) the est

APA, Harvard, Vancouver, ISO, and other styles

34

Conti, S., M. Klar, and B. Zwicknagl. "Piecewise affine stress-free martensitic inclusions in planar nonlinear elasticity." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473, no. 2203 (2017): 20170235. http://dx.doi.org/10.1098/rspa.2017.0235.

Full text

Abstract:

We consider a partial differential inclusion problem which models stress-free martensitic inclusions in an austenitic matrix, based on the standard geometrically nonlinear elasticity theory. We show that for specific parameter choices there exist piecewise affine continuous solutions for the square-to-oblique and the hexagonal-to-oblique phase transitions. This suggests that for specific crystallographic parameters the hysteresis of the phase transformation will be particularly small.

APA, Harvard, Vancouver, ISO, and other styles

35

Isaac, Chukwuemeke William. "Crushing response of circular thin-walled tube with non-propagating crack subjected to dynamic oblique impact loading." International Journal of Protective Structures 11, no. 1 (2019): 41–68. http://dx.doi.org/10.1177/2041419619849087.

Full text

Abstract:

The dynamic oblique crushing of circular thin-walled tubes with the presence of non-propagating crack was investigated numerically. The material considered was strain rate sensitive with crack located at the distal end of the tube. Major crashworthiness parameters were obtained and the analysis of the structural response for idealized and finite element crushed thin-walled tubes was also carried out. The study shows that crack initiation on energy absorbing tubes increase their crushing force efficiency under oblique impact, decrease their crushing force efficiency under axial impact and reduc

APA, Harvard, Vancouver, ISO, and other styles

36

Tang, A. J., and Zhan Qiang Liu. "Effect of Helix Angle and Normal Rake Angle on Stability in End Milling." Advanced Materials Research 69-70 (May 2009): 394–98. http://dx.doi.org/10.4028/www.scientific.net/amr.69-70.394.

Full text

Abstract:

Chatter phenomenon often occurs during end milling of metal-cutting and becomes a common limitation to achieve high productivity and part quality. This paper studies the relationship expression between the parameters of oblique cutting and milling coefficients by analyzing the geometrical relationship of oblique cutting, and derives the mathematic expressions in theory between the cutter parameters and chatter. For the purpose of chatter avoidance, this paper studies the effect of helix angle and normal rake angle on milling stability under the condition of the same milling parameters, and plo

APA, Harvard, Vancouver, ISO, and other styles

37

Bristow, W. A., and R. A. Greenwald. "Estimating gravity wave parameters from oblique high-frequency backscatter: Modeling and analysis." Journal of Geophysical Research: Space Physics 100, A3 (1995): 3639–48. http://dx.doi.org/10.1029/94ja02704.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zhou, Xuemei, and Xiaoli Zhang. "Individual Tree Parameters Estimation for Plantation Forests Based on UAV Oblique Photography." IEEE Access 8 (2020): 96184–98. http://dx.doi.org/10.1109/access.2020.2994911.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Jaiswal, Pratima, Lakshmi Verma, and Tuhin Ghulyani. "Correlation between femoral offset and other morphometric parameters." National Journal of Clinical Anatomy 06, no. 02 (2017): 137–45. http://dx.doi.org/10.1055/s-0039-1700737.

Full text

Abstract:

Abstract Background and aims: Surgeries involving the femur are quite common. The clinical importance of femur in sports biomechanics and rehabilitation is well known. Therefore, its morphometries has orthopedic implications. The present study aims at establishing interrelationship among various external parameters in adult dried femora including femoral offset (FO), neck shaft angle [NSA], femoral anteversion angle [FNA], Neck width [NW], Anterior Neck length [ANL], Posterior Neck length [PNL], Oblique length [OL] and trochanteric oblique length [TOL], Materials and Methods: A total of 100 [5

APA, Harvard, Vancouver, ISO, and other styles

40

Liu, Tongxin, Guobin Yang, Yaogai Hu, et al. "A Novel Ionospheric Sounding Network Based on Complete Complementary Code and Its Application." Sensors 19, no. 4 (2019): 779. http://dx.doi.org/10.3390/s19040779.

Full text

Abstract:

In this paper, complete complementary code (CCC) sequences are applied to a High Frequency (HF) ionospheric sounding network. Ionosondes distributed at multiple locations use the mutually orthogonal CCC sequences to conduct vertical soundings synchronously. At the same time, thanks to the omnidirectional antennas, every station can receive the oblique echoes transmitted from the others. Due to the orthogonality between the code sequences, both vertical and oblique ionograms can be simultaneously obtained and completely separated. Through this method, the sounding efficiency can be enhanced, an

APA, Harvard, Vancouver, ISO, and other styles

41

Nezere, Norhafizan, and Al Emran Ismail. "Crushing Behaviour of Empty Steel Tubes under Oblique Loading." Advanced Materials Research 1087 (February 2015): 11–15. http://dx.doi.org/10.4028/www.scientific.net/amr.1087.11.

Full text

Abstract:

<span><p><span lang="EN-GB">This paper presents numerically the empty tube response subjected to oblique loading. According to literature survey, there have large number of works discuss on the crushing performance when subjected to axial loading. However, lack of work available on the crushing behaviour under oblique loading.</span><span lang="EN-GB"> </span><span lang="EN-GB">Therefore, this work presents the numerical studies on the crushing behavior of empty tube subjected to oblique loading. ANSYS Finite element program was used to model and solve

APA, Harvard, Vancouver, ISO, and other styles

42

Usuelli, Federico G., Jonathan RM Kaplan, Camilla Maccario, Luigi Manzi, and Cristian Indino. "A Novel and Safe Fibular Osteotomy for Total Ankle Replacement through Lateral Transfibular Approach." Foot & Ankle Orthopaedics 4, no. 4 (2019): 2473011419S0042. http://dx.doi.org/10.1177/2473011419s00423.

Full text

Abstract:

Category: Ankle Arthritis Introduction/Purpose: The lateral transfibular total ankle arthroplasty (TAA) has been reported on with good short term outcomes. One key downside to the lateral TAA is the rate of symptomatic hardware and wound issues requiring hardware removal seen with the short oblique fibular osteotomy. Therefore, we report on a comparative cohort study of lateral TAA using the traditional short oblique fibular osteotomy to a long oblique fibular osteotomy, termed Foot and Ankle Reconstruction Group Osteotomy (FARG). Methods: Retrospective identification of primary lateral transf

APA, Harvard, Vancouver, ISO, and other styles

43

Dolai, P. "Oblique Water Wave Diffraction by a Step." International Journal of Applied Mechanics and Engineering 22, no. 1 (2017): 35–47. http://dx.doi.org/10.1515/ijame-2017-0003.

Full text

Abstract:

Abstract This paper is concerned with the problem of diffraction of an obliquely incident surface water wave train on an obstacle in the form of a finite step. Havelock expansions of water wave potentials are used in the mathematical analysis to obtain the physical parameters reflection and transmission coefficients in terms of integrals. Appropriate multi-term Galerkin approximations involving ultraspherical Gegenbauer polynomials are utilized to obtain a very accurate numerical estimate for reflection and transmission coefficients which are depicted graphically. From these figures various in

APA, Harvard, Vancouver, ISO, and other styles

44

Wu, Chuan-Yu, Colin Thornton, and Long-Yuan Li. "A semi-analytical model for oblique impacts of elastoplastic spheres." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 465, no. 2103 (2008): 937–60. http://dx.doi.org/10.1098/rspa.2008.0221.

Full text

Abstract:

Results of finite-element analysis (FEA) of oblique impacts of elastic and elastic, perfectly plastic spheres with an elastic flat substrate are presented. The FEA results are in excellent agreement with published data available in the literature. A simple model is proposed to predict rebound kinematics of the spheres during oblique impacts. In this model, the oblique impacts are classified into two regimes: (i) persistent sliding impact, in which sliding occurs throughout the impact, the effect of tangential (elastic or plastic) deformation is insignificant and the model reproduces the well-e

APA, Harvard, Vancouver, ISO, and other styles

45

Yahiaoui, Toufik, Toufik Zebbiche, Abderrazak Allali, and Mohamed Boun-jad. "Gas effect for oblique and conical shock waves at high temperature." Mathematical Modelling of Natural Phenomena 15 (2020): 73. http://dx.doi.org/10.1051/mmnp/2020036.

Full text

Abstract:

The work focuses to develop a new numerical calculation program for determining the gas effect at high temperature instead air on the calculation of the oblique and conical shock waves parameters and make applications for various external and internal aerodynamics problems like, the calculation of the suitable intake adaptation parameters, dihedron and cone wave drag, aerodynamic coefficients of a pointed supersonic airfoil and oblique shock reflection without forgetting others no less important like the detonation propulsion and the dust explosion applications, where the high temperature gas

APA, Harvard, Vancouver, ISO, and other styles

46

CHENG, HSIN-CHIA. "PRECISION SUPERSYMMETRY MEASUREMENTS AT THE e-e- COLLIDER." International Journal of Modern Physics A 13, no. 14 (1998): 2329–36. http://dx.doi.org/10.1142/s0217751x98001116.

Full text

Abstract:

Measurements of supersymmetric particle couplings provide important verification of supersymmetry. If some of the superpartners are at the multi-TeV scale, they will escape direct detection at planned future colliders. However, such particles induce nondecoupling corrections in processes involving the accessible superparticles through violations of the supersymmetric equivalence between gauge boson and gaugino couplings. These violations are analogous to the oblique corrections in the electroweak sector of the Standard Model, and can be parametrized in terms of super-oblique parameters. The e-

APA, Harvard, Vancouver, ISO, and other styles

47

FUNK, GERHARDT, DEVA O'NEIL, and R. MICHAEL WINTERS. "WHAT THE OBLIQUE PARAMETERS S, T AND U AND THEIR EXTENSIONS REVEAL ABOUT THE 2HDM: A NUMERICAL ANALYSIS." International Journal of Modern Physics A 27, no. 05 (2012): 1250021. http://dx.doi.org/10.1142/s0217751x12500212.

Full text

Abstract:

The oblique parameters S, T and U and their higher-order extensions (V, W and X) are observables that combine electroweak precision data to quantify deviation from the Standard Model. These parameters were calculated at one loop in the basis-independent CP-violating Two-Higgs Doublet Model (2HDM). The scalar parameter space of the 2HDM was randomly sampled within limits imposed by unitarity and found to produce values of the oblique parameters within experimental bounds, with the exception of T. The experimental limits on T were used to predict information about the mass of the charged Higgs b

APA, Harvard, Vancouver, ISO, and other styles

48

Sulong, Abu Bakar, Abdullah Atiq Ariffin, Jaafar Sahari, and Hendra Suherman. "Analysis of Energy Absorption on Pultruded Composite Tube under Oblique Loading." Key Engineering Materials 471-472 (February 2011): 215–20. http://dx.doi.org/10.4028/www.scientific.net/kem.471-472.215.

Full text

Abstract:

The capability of structures to absorb as much amount energy, particularly in automotive structures to reduce the damages due to impact energy during collision attract attention of many reserachers. During the actual collision, the crash box is not only experienced axially crash, but also in oblique crash. In this study, an experiment was carried out to study the crashworthiness parameters and behaviour of pultruded fibre E-glass/polyester pultruded composite tubes under oblique loading. Quasi-static loadings were applied axially and oblique on the pultruded composite to investigate the respon

APA, Harvard, Vancouver, ISO, and other styles

49

HE, LIJUN, CHUAN LI, and XINGZHAO LIU. "RESIDUAL STRESSES IN OBLIQUE INCIDENCE DEPOSITED ALUMINA THIN FILM." Surface Review and Letters 21, no. 02 (2014): 1450024. http://dx.doi.org/10.1142/s0218625x14500243.

Full text

Abstract:

Residual stresses of alumina thin film deposited on silicon substrate by using electron beam evaporation with oblique angle deposition (OAD) method are studied. The growth parameters that affect the residual stresses of alumina thin film, such as the substrate temperature, the deposition rate, the film thickness, the inclined angle, and the testing temperature are discussed. The results show that the tensile stress value decreases with the increasing substrate temperature, and the compressive stress value increases with the increasing substrate temperature at various inclined angles. Along wit

APA, Harvard, Vancouver, ISO, and other styles

50

Wang, Chun, Hao Cheng, and Bin Su. "Johnson Cook Material Model and Simulation Experiment of Aluminum Alloy 6005A." Advanced Materials Research 472-475 (February 2012): 510–14. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.510.

Full text

Abstract:

The true stress-strain curve of aluminum alloy 6005A is attained by quasi-static compression experiments, and Johnson Cook material model parameters of aluminum alloy 6005A is determined by using least-squares fitting. The aluminum alloy 6005A finite element model of the oblique cutting process is established in ABAQUS software, and verified by the oblique cutting simulation and experiments. The finite element model of high-speed side milling process is also established and the influence of milling cutter spiral angle on cutting force is analyzed.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!