Relevant bibliographies by topics / Oblique plane of symmerty

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Oblique plane of symmerty'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Oblique plane of symmerty.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Oblique plane of symmerty"

1

KIM, KWANG YUL, ARTHUR G. EVERY, and WOLFGANG SACHSE. "DETERMINATION OF THE ELASTIC CONSTANTS OF ANISOTROPIC SOLIDS FROM GROUP VELOCITIES MEASURED IN SYMMETRY DIRECTIONS." International Journal of Modern Physics B 10, no. 02 (January 20, 1996): 235–46. http://dx.doi.org/10.1142/s0217979296000106.

Full text
Abstract:
We present in this article a novel method of determining all three elastic constants of cubic crystals from a single broadband waveform propagating in the [001] direction. The method can be easily extended to media of orthorhombic symmetry whose symmetry plane quasitransverse (QT) group velocity sheet is folded across the symmetry axis. The usefulness of these formulas lies in providing a very convenient and easy method of determining all the elastic constants of a medium from the rays propagating in the principal symmetry directions of the medium. Particular emphasis is given to the so-called oblique-mode QT rays with group velocity lying along a symmetry axis but with wave normal lying away from that axis in a symmetry plane. Through the use of these oblique modes the need to make off-axis measurements to obtain a complete set of elastic constants is circumvented. Moreover, we describe a method of clarifying the ambiguity that arises; with which symmetry plane is the wave normal of an oblique-mode QT ray propagating in the symmetry axis associated. Further, we show how the effect of a finite rise time source can be corrected for in the determination of a mixed index elastic constant.
APA, Harvard, Vancouver, ISO, and other styles
2

MOZHAEV, V. G., F. BOSIA, and M. WEIHNACHT. "OBLIQUE ACOUSTIC AXES IN TRIGONAL CRYSTALS." Journal of Computational Acoustics 09, no. 03 (September 2001): 1147–61. http://dx.doi.org/10.1142/s0218396x01001108.

Full text
Abstract:
A general analysis on the subject of acoustic axes for bulk acoustic waves in trigonal crystals is presented. It is shown that the effect of piezoelectricity increases the maximum allowable number of acoustic axes in the plane of elastic symmetry from three to five for trigonal crystals of class 3m, and from 3 to 7 for trigonal crystals of class 32. The theory of acoustic axes of general orientation developed by Khatkevich (1962) is revised. A new, simpler and more general derivation of the conditions for the occurrence of acoustic axes of general orientation in crystals is presented. It is found that the previous analytical results and conclusions stating the absence of such axes in trigonal crystals are incorrect. New correct equations for acoustic axes of general orientation in trigonal nonpiezoelectric crystals are derived and confirmed by independent numerical calculations. Acoustic axes of general orientation oblique to the elastic symmetry planes are found to exist in berlinite (class 32) and in nonpiezoelectric lithium niobate (class 3m), however piezoelectricity eliminates these axes in the latter crystal. Some illustrative examples of the relationship between leaky surface acoustic wave branches and acoustic axes in trigonal crystals are given.
APA, Harvard, Vancouver, ISO, and other styles
3

Bolon, Brad. "Regulatory Forum Opinion Piece*: Effective Sectioning of Spinal Cord during Regulatory-type Nonclinical Toxicity Studies." Toxicologic Pathology 45, no. 5 (July 2017): 580–83. http://dx.doi.org/10.1177/0192623317720120.

Full text
Abstract:
Regulatory guidelines for nonclinical neurotoxicity testing require spinal cord evaluation but do not specify a trimming scheme. The Society of Toxicologic Pathology (STP) “best practices” for nervous system sampling during nonclinical general toxicity studies recommend that spinal cord be assessed in both longitudinal/oblique and transverse sections. This article defines possible longitudinal/oblique orientations, describes their benefits and challenges, and provides an expert recommendation regarding suitable trimming planes. Longitudinal parasagittal (LP) sections follow a vertical plane just lateral to the midline, revealing sensory and motor tracts but little gray matter. Longitudinal horizontal sections transect only sensory or motor tracts and variable quantities of gray matter. Oblique vertical (OV) sections angle across the spinal cord from side to side. Oblique transverse (OT) sections slant through from top (dorsal [posterior]) to bottom (ventral [anterior]). Compared to longitudinal planes, oblique orientations demonstrate considerably more gray matter and white matter. Current STP “best practices” explicitly recommend the LP and OV options; the OT orientation also will yield suitable sections while permitting assessment of anatomic symmetry. Selection among the LP, OT, and OV planes should be at the discretion of the study pathologist. The bilaterally symmetrical OT sections likely will be analyzed most easily by nonneuropathologists.
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Jian Hui, Rong Ling Sun, Zheng Hao Yang, Xin Yang Lin, and Hai Cheng Niu. "Constitutive Relations of Concrete under Plane Stresses Based on Generalized Octahedral Theory." Applied Mechanics and Materials 71-78 (July 2011): 342–52. http://dx.doi.org/10.4028/www.scientific.net/amm.71-78.342.

Full text
Abstract:
Continuous (or generalized) octahedral element bodies can be obtained by intercepting a cube with three groups of failure (or yield) planes successively under true triaxial stress state, on which the stresses are twin stresses. Among the resulting polyhedral characteristic element bodies, isoclinal octahedron and orthogonal octahedron are of particular importance. Strength models of continuous octahedrons are then derived by stress analysis to arbitrary inclined sections in three dimensional stress space, and strain models by the principle of strain analysis, so the plane constitutive relations of concrete can be understood by plane problems transformed by stress-strain space according to the symmetry of an orthogonal octahedral octahedron where an arbitrary oblique plane is parallel to one of three rectangular coordinate axes.
APA, Harvard, Vancouver, ISO, and other styles
5

Deatherage, J. F., N. Q. Cheng, and B. Bullard. "Arrangement of filaments and cross-links in the bee flight muscle Z disk by image analysis of oblique sections." Journal of Cell Biology 108, no. 5 (May 1, 1989): 1775–82. http://dx.doi.org/10.1083/jcb.108.5.1775.

Full text
Abstract:
Information from oblique thin sections and from three-dimensional reconstructions of tilted, transverse thin sections (Cheng, N., and J. F. Deatherage. 1989. J. Cell Biol. 108:1761-1774) has been combined to determine the three-dimensional structure of the honeybee flight muscle Z disk at 70-A resolution. The overall symmetry and structure of the Z disk and its relationship to the rest of the myofibril have been determined by tracing filaments and connecting elements on electron images of oblique sections which have been enhanced by a local crystallographic averaging technique. In the three-dimensional structure, the connecting density between actin filaments can be described as five compact, crystallographically nonequivalent domains. Features C1 and C2 are located on the transverse twofold rotation axes in the central plane of the Z disk. They are associated with the sides of actin filaments of opposite polarity. Features C3, C4, and C5 are present in two symmetry-related sets which are located on opposite sides of the central plane. C3 and C5 are each associated with two filaments of opposite polarity, interacting with the side of one filament and the end of the other filament. C3 and C5 may be involved in stabilizing actin filament ends inside the Z disk. The location of the threefold symmetric connection C4, relative to the thick filament of the adjacent sarcomere, is determined and its possible relationship to the C filament is considered.
APA, Harvard, Vancouver, ISO, and other styles
6

Tan, Qingchang, Ying Kou, Jianwei Miao, Siyuan Liu, and Bosen Chai. "A Model of Diameter Measurement Based on the Machine Vision." Symmetry 13, no. 2 (January 25, 2021): 187. http://dx.doi.org/10.3390/sym13020187.

Full text
Abstract:
If the shaft diameter can be measured in-situ during the finishing process, the closed-loop control of the shaft diameter processing process can be realized and the machining accuracy can be improved. Present work studies the measurement of shaft diameter with the structured light system composed of a laser linear light source and a camera. The shaft is a kind of part with rotationally symmetric structure. When the linear structured light irradiates the surface of the shaft, a light stripe will be formed, and the light stripe is a part of the ellipse. Therefore, the in-situ measurement of the shaft diameter can be realized by the light stripe and the rotational symmetry of the shaft. The measurement model of shaft diameter is established by the ellipse formed by the intersection of the light plane and the measured shaft surface. Firstly, in the camera coordinate system, normal vector of the light plane and the coordinates of the ellipse center are obtained by the calibration; then, the equation of oblique elliptic cone is established by taking the ellipse as the bottom and the optical center of the camera as the top. Next, the measurement model of shaft diameter is obtained by the established oblique elliptic cone equation and theoretical image plane equation. Finally, the accuracy of the measurement model of shaft diameter is tested by the checkerboard calibration plate and a lathe. The test results show that the measurement model of shaft diameter is correct, and when the shaft diameter is 36.162mm, the speed is 1250r/min, the maximum average measurement error is 0.019mm. The measurement accuracy meets the engineering requirement.
APA, Harvard, Vancouver, ISO, and other styles
7

Zettlitzer, Michael, Heindirk tom Dieck, and Lutz Stamp. "Reaktionen N-silylierter Endiamine, I Übergangsmetallkomplexe von 1,3-Diaza-2-sila-4-cyclopentenen / Reactions of N-Silated Endiamines, I Transition Metal Complexes of 1,3-Diaza-2-sila-4-cyclopentenes." Zeitschrift für Naturforschung B 41, no. 10 (October 1, 1986): 1230–38. http://dx.doi.org/10.1515/znb-1986-1008.

Full text
Abstract:
Abstract1,3-Di̲aza-2-s̱ila-4-c̱yclopentenes 1 (DISC), which are electron-rich and easily oxidizable ole­ fins, form strongly coloured, but poorly soluble 1:1 adducts with cuprous halides, while silver trifluoromethylsulfonate oxidizes 1. Much more soluble and again strongly coloured complexes of stoichiometry LPdX2, (L)1.5PdX2 and L 2PdX2 are formed from 1 and palladium halides. The well-crystallizing adduct (PdCl2 · L)2 3a was chosen for an X-ray structure analysis (monoclinic, space group P2/c; a = 10.215(3), b = 14.681(3), c =23.642(5) Å , β = 101.31(2)°; Z = 8 ; R = 0.054), which revealed an almost planar DISC ligand in an oblique η2(C=C)-coordination relative to the π-plane. Structural data and rather peculiar spectroscopic properties encourage a comparison of 3a with complexes, in which an electron-rich olefin is split to give a bis(carbene) ligand system. The electronic reasons for the splitting of electron-rich olefins at d8 metals are discussed under symmetry considerations.
APA, Harvard, Vancouver, ISO, and other styles
8

Debarros, Fabien, Pierre Lemaître-Auger, Alysson Vasconcelos Gomes de Menezes, Romain Siragusa, Tan-Phu Vuong, Guy Eymin Petot Tourtollet, and Glauco Fontgalland. "Characterization of frequency-selective surface spatial filters in a rectangular waveguide." International Journal of Microwave and Wireless Technologies 4, no. 1 (January 5, 2012): 59–69. http://dx.doi.org/10.1017/s1759078711001097.

Full text
Abstract:
The possibility to characterize infinite and periodic frequency-selective surfaces (FSS) filters that have two orthogonal axes of symmetry inside a waveguide is reported. Thus, preliminary measurements can rapidly be obtained at low cost with few elementary cells instead of using a large FSS panel in free space. This is possible because of the equivalence that exists between the electromagnetic fields of two symmetric and oblique plane waves incident on and reflected from an infinite periodic surface and the incident/reflected fields that exist inside a single-mode rectangular waveguide containing a finite number of elementary cells. Comparisons of the measurements with some full-wave simulations for FSS belonging to the first three groups as they were defined by Munk confirm the good agreement between them. This is an interesting and simple assessment tool concerning the fabrication quality of FSS. The extension of this technique to non-symmetric FSS patterns is also discussed and supported by experimental and simulation results. The limitations of the technique are finally discussed.
APA, Harvard, Vancouver, ISO, and other styles
9

PESCH, W., D. PALANIAPPAN, J. TAO, and F. H. BUSSE. "Convection in heated fluid layers subjected to time-periodic horizontal accelerations." Journal of Fluid Mechanics 596 (January 17, 2008): 313–32. http://dx.doi.org/10.1017/s0022112007009457.

Full text
Abstract:
A theoretical study is presented of convection in a horizontal fluid layer heated from below or above which is periodically accelerated in its plane. The analysis is based on Galerkin methods as well as on direct numerical simulations of the underlying Boussinesq equations.Shaking in a fixed direction breaks the original isotropy of the layer. At onset of convection and at small acceleration, we find longitudinal rolls, where the roll axis aligns parallel to the acceleration direction. With increasing acceleration amplitude, a shear instability takes over and transverse rolls with the axis perpendicular to the shaking direction nucleate at onset. In the nonlinear regime, the longitudinal rolls become unstable against transverse modulations very close to onset which leads to a kind of domain chaos between patches of symmetry degenerated oblique rolls.In the case of circular shaking, the system is isotropic in the time average sense, however, with a broken chiral symmetry. The onset of convection corresponds to the transverse roll case studied before with the roll axis selected spontaneously. With increasing Rayleigh number, a heteroclinic cycle is observed with the roll changing its orientation periodically in time. At even higher Rayleigh number, this heteroclinic cycle becomes chaotic similarly to the case of the Küppers–Lortz instability.
APA, Harvard, Vancouver, ISO, and other styles
10

Babaei, Reza, Shokoofe Goli-Haghighi, and Hadi Savaloni. "Detection of overtone and combined peaks using Mn/Cu helical star-shaped (pine-tree-like) sculptured thin films in surface-enhanced Raman spectroscopy." Journal of Theoretical and Applied Physics 13, no. 4 (September 9, 2019): 305–14. http://dx.doi.org/10.1007/s40094-019-00348-2.

Full text
Abstract:
Abstract Mn helical star-shaped (pine-tree-like) nano-sculptured thin films with three-, four-and fivefold symmetry on copper substrates were produced using oblique angle deposition method in conjunction with rotation of sample holder at certain angles. Raman spectroscopy of the samples which were subjected to impregnation by 4,4′-bipyridine (C10H8N2) solution was carried out by 632.8 nm wavelength laser. The analysis of the Raman spectra showed enhancement for the 4,4′-bipyridine main bands (1592 and 1297 cm−1) belonging to the C=C stretching mode, aromatic ring stretching ring and in-plane ring mode of 4,4′-bipyridine, same as results obtained for Ag nano-structures. In addition, overtone and combined peaks are detected that may be related to the particular sculptured structure of the thin films fabricated in this work and the laser wavelength used for Raman spectroscopy. UV–Vis (absorption mode) spectra showed consistent observations with the SERS results leading to important role of surface electromagnetic selection rule in intensification of SERS, in addition pointing out the importance of the effect of the size of hot spots on the frequency of the localized surface plasmonic oscillations.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Oblique plane of symmerty"

1

Bukhari, Ghadeer, and Wenheng Zhang. "INDEPENDENT ORIGINATION OF FLORAL ZYGOMORPHY, A PREDICTED ADAPTIVE RESPONSE TO POLLINATORS: DEVELOPMENTAL AND GENETIC MECHANISMS." VCU Scholars Compass, 2016. http://scholarscompass.vcu.edu/etd/4482.

Full text
Abstract:
Observations of floral development indicate that floral organ initiation in pentapetalous flowers more commonly results in a medially positioned abaxial petal (MAB) than in a medially positioned adaxial petal (MAD), where the medial plane is defined by the stem and the bract during early floral development. It was proposed that the dominant MAB petal initiation might impose a developmental constraint that leads to the evolution of limited patterns of floral zygomorphy in Asteridae, a family in which the floral zygomorphy develops along the medial plane and results in a central ventral (CV) petal in mature flowers. Here, I investigate whether the pattern of floral organ initiation may limit patterns of floral zygomorphy to evolve in pentapetalous angiosperms. I analyzed floral diagrams representing 405 species in 330 genera of pentapetalous angiosperms to reconstruct the evolution of floral organ initiation and the evolution of developmental processes that give rise to floral zygomorphy on a phylogenetic framework. Results indicate that MAB petal initiation is the most common; it occupies 86.2% of diversity and represents the ancestral state of floral organ initiation in pentapetalous angiosperms. The MAD petal initiation evolved 28 times independently from the ancestral MAB petal initiation. Among the 34 independent originations of floral zygomorphy, 76.5% of these clades represent MAB petal initiation, among which only 47% of the clades result a CV petal in mature flowers. The discrepancy is explained by the existence of developmental processes that result in floral zygomorphy along oblique planes of floral symmetry in addition to along the medial plane. Findings suggest that although the early floral organ initiation plays a constraining role to the evolution of patterns of floral zygomorphy, the constraint diverges along phylogenetically distantly related groups that allow the independent originations of floral zygomorphy through distinct development processes in pentapetalous angiosperms. In additional study, the butterfly-like flowers of Schizanthus are adapted to pollination by bees, hummingbirds, and moths. I investigated the genetic basis of the zygomorphic corolla, for which development is key to the explosive pollen release mechanism found in the species of Schizanthus adapted to bee pollinators. I examined differential gene expression profiles across the zygomorphic corolla of Schizanthus pinnatus, a bee-pollinated species, by analyzing RNA transcriptome sequencing (RNA- seq). Data indicated that CYC2 is not expressed in the zygomorphic corolla of Sc. pinnatus, suggesting CYC2 is not involved in the development of floral zygomorphy in Schizanthus (Solanaceae). The data also indicated that a number of genes are differentially expressed across the corolla.
APA, Harvard, Vancouver, ISO, and other styles
2

YOUSIF, HASHIM AZEZ. "SCATTERING OF ELECTROMAGNETIC PLANE WAVES FROM TWO INFINITELY LONG PARALLEL CYLINDERS OF ARBITRARY MATERIALS AT OBLIQUE INCIDENCE." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184122.

Full text
Abstract:
The Mueller scattering matrix elements (S(ij)) and the cross-sections for the scattering of an electromagnetic plane wave from two infinitely long, parallel, circular cylinders at oblique incidence are derived. Each cylinder can be of arbitrary materials (any refractive index). The incident wave can be in any polarization state. To find the scattering coefficients, which are essential for calculating S(ij) and the cross-sections, the multiple scatterings were taken into account for all orders such that the 'incident' field of one cylinder is the true incident field plus the scattered field from the other cylinder. The formal solutions of the scalar wave equation are obtained in the three regions; the region outside the two cylinders, the region inside each cylinder and the scattering coefficients are found by satisfying the boundary conditions. A computer program was written. The scattering coefficients are calculated from a matrix equation. This is the first comprehensive study of the two cylinder problem. Special cases are considered in comparison with other published works. Calculations are shown of S(ij) and of cross-sections for some selected cases of configurations of the two cylinders.
APA, Harvard, Vancouver, ISO, and other styles
3

Kato, Stephen. "A GTD solution to scattering of plane waves at oblique incidence by a dielectric coated circular cylinder." The Ohio State University, 1988. http://rave.ohiolink.edu/etdc/view?acc_num=osu1345562403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hui-ChuanSu and 蘇慧娟. "Performance of wrist extensors for wrist motions in oblique plane." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/48829977861783873961.

Full text
Abstract:
碩士
國立成功大學
生物醫學工程學系
103
Cumulative trauma disorders of upper extremity, such as lateral epicondylitis, are common in sport activities and workplace. Inappropriate postures, repetitive movements and forceful exertions during tasks are risk factors. About 50% of novice tennis players are affected by lateral epicondylitis. This may be due to faulty mechanism of tennis backhand stroke in novices. Previous studies have investigated the effect of wrist angle on extension torque production. However, those information focused only on isometric and concentric contraction for wrist motions in sagittal plane. Furthermore, the available wrist dynamometers on the market provide wrist motions in sagittal or coronal plane, which are different from functional wrist activities in oblique plane. Besides that, there is also a lack of investigation about effect of wrist angle on wrist extensor activation. In this study, performance of wrist extensors was compared between wrist motions in oblique and sagittal plane by using a custom made wrist dynamometer. The wrist motion simulated in oblique plane was tennis backhand stroke. The effect of wrist angle on torque production and muscle activation were examined during simulated tennis backhand stroke. Surface electromyography was used to record activation of wrist extensors during experimental tasks. Thirty healthy participants perform maximum isometric, concentric and eccentric wrist extension in oblique plane, and twelve of them also conducted the same tasks in sagittal plane. Wrist extension torque and activation of wrist extensors were both recorded during tasks. The results showed that performance of wrist extensors was exactly different between wrist motions in oblique and sagittal plane, including muscle activation of wrist extensors during isometric contraction and peak torque magnitude and relationship between muscle activation and angular velocity during isokinetic contraction. About performance of wrist extensors in oblique plane, the wrist angle significantly affected extension torque and muscle activation during isometric contraction, whereas wrist angle interacted with angular velocity during dynamic contraction. Generally, the maximum wrist extension torque and neuromuscular efficiency occurred at wrist position of neutral and slight extension. Results of this study can help to investigate cumulative trauma disorders of upper extremity. The custom made dynamometer used in current study provide wrist motions closer to functional wrist motions. This study can be further used in recommendations of tennis, muscle strength evaluation in the clinics and ergonomics of upper extremity. Future study about wrist joint is recommended to use modified dynamometer to investigate muscle performance which is closer to actual wrist motions. Further study is still necessary to confirm the relationship between wrist angle and forearm muscle performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Chin, Ke-Wei, and 秦克威. "Localization of Objects on an Oblique Plane via Pixel Variation of CCD Images." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/42069431490231976602.

Full text
Abstract:
碩士
淡江大學
電機工程學系碩士班
98
This thesis presents an image-based system for measuring target objects on an oblique surface based on pixel variation of CCD images. By using the zooming function of a PTZ camera, we can simulate two images at two different photographing distances. By using the different pixel counts of the target object in the CCD image frame, two-dimensional localization of the target object on the oblique plane can be accomplished. To validate the effectiveness and viability of the proposed method, practical experiments are conducted in the thesis. Experiment results demonstrate that the proposed measuring system has a satisfactory accuracy in self-localization for mobile robots.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Oblique plane of symmerty"

1

Key to Chisholm's mathematical mechanical scale: An instrument for solving all problems in arithemetic, geometry, and trigonometry, right-angled and oblique, plane and spherical : without the aid of tables, except those of latitude and longitude. [Halifax, N.S.?: s.n., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fleur, Johns. Part III Regimes and Doctrines, Ch.32 Theorizing the Corporation in International Law. Oxford University Press, 2016. http://dx.doi.org/10.1093/law/9780198701958.003.0033.

Full text
Abstract:
This chapter redescribes the rather oblique theorizations of the corporation in public international law, by first outlining some generic characterizations of the corporation in international legal writing, before turning to two areas of international legal doctrine, practice, and scholarly work: international investment law and international human rights. In both of these areas, the corporation has often been identified with potential dysfunction within, or subtraction from, the international legal order. International legal engagement of the corporation has, accordingly, been identified with the discipline’s corrective realignment, rejuvenation or augmentation. So figured, the corporation has been central to the maintenance of prospects of, and aspirations for, ‘governance fusion’ on the global plane. Precisely because of the paragnostic way it has been known to international law, the corporation has been a pivotal figure in international legal knowledge practice.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Oblique plane of symmerty"

1

Çakmak, Mehmet, and Melih Cıvan. "Oblique Plane Deformities." In Basic Techniques for Extremity Reconstruction, 277–83. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-45675-1_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paley, Dror. "Oblique Plane Deformities." In Principles of Deformity Correction, 175–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-642-59373-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Durizch, M. L., and J. T. Littleton. "Left Posterior Oblique Plane." In Chest Atlas, 215–65. New York, NY: Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4613-9311-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Durizch, M. L., and J. T. Littleton. "Right Posterior Oblique Plane." In Chest Atlas, 267–309. New York, NY: Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4613-9311-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grafarend, Erik W., Rey-Jer You, and Rainer Syffus. "“Sphere to Tangential Plane”: Oblique Aspect." In Map Projections, 247–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-36494-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mignogna, R. B. "Ultrasonic Determination of Elastic Constants from Oblique Angles of Incidence in Non-Symmetry Planes." In Review of Progress in Quantitative Nondestructive Evaluation, 1565–72. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-5772-8_201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yanushauskas, A. I. "Oblique Derivative Problem with Direction of Differentiation Going into the Tangent Plane." In The Oblique Derivative Problem of Potential Theory, 113–67. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-1674-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meiburg, Eckart. "The Three-Dimensional Evolution of Oblique Waves in Plane Wakes." In Bluff-Body Wakes, Dynamics and Instabilities, 325–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-662-00414-2_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bernstein, Mitchell, and S. Robert Rozbruch. "Hypertrophic Tibial Nonunion with Oblique Plane Deformity Treated with TSF." In Limb Lengthening and Reconstruction Surgery Case Atlas, 1–9. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02767-8_174-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bernstein, Mitchell, and S. Robert Rozbruch. "Case 19: Hypertrophic Tibial Nonunion with Oblique Plane Deformity Treated with TSF." In Limb Lengthening and Reconstruction Surgery Case Atlas, 133–39. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-18026-7_174.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Oblique plane of symmerty"

1

Sparks, Hugh. "Dual-view oblique plane microscopy." In Virtual 12th Light Sheet Fluorescence Microscopy Conference 2020. Royal Microscopical Society, 2020. http://dx.doi.org/10.22443/rms.lsfm2020.24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dunsby, C. "Optically Sectioned Imaging by Oblique Plane Microscopy." In European Conference on Biomedical Optics. Washington, D.C.: OSA, 2009. http://dx.doi.org/10.1364/ecbo.2009.7367_0h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar, Sunil, Ziduo Lin, Alex R. Lyon, Ken T. MacLeod, and Chris Dunsby. "Optically sectioned imaging by oblique plane microscopy." In SPIE BiOS, edited by Jose-Angel Conchello, Carol J. Cogswell, Tony Wilson, and Thomas G. Brown. SPIE, 2011. http://dx.doi.org/10.1117/12.873471.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dunsby, C. "Optically sectioned imaging by oblique plane microscopy." In European Conferences on Biomedical Optics, edited by Paul J. Campagnola, Ernst H. K. Stelzer, and Gert von Bally. SPIE, 2009. http://dx.doi.org/10.1117/12.831543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Jeongmin, Tongcang Li, Yuan Wang, and Xiang Zhang. "Resolving power in direct oblique plane imaging." In SPIE BiOS, edited by Thomas G. Brown, Carol J. Cogswell, and Tony Wilson. SPIE, 2015. http://dx.doi.org/10.1117/12.2078008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Jeongmin, Tongcang Li, Yuan Wang, and Xiang Zhang. "Optical resolution in wide-field oblique plane microscopy." In Computational Optical Sensing and Imaging. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/cosi.2014.ctu4b.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Yong-Ping, Rong Wu, Xiaobo Zhang, Wei Zhang, and Fangjie Shu. "Beam smoothing on oblique surface after focus plane." In Optics & Photonics 2005, edited by Fred M. Dickey and David L. Shealy. SPIE, 2005. http://dx.doi.org/10.1117/12.615613.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yang, Yi, Huan Ren, Lin Zhang, Zhendong Shi, Hua Ma, and Yong He. "Parallelism measurement of plane glass at oblique incidence by interferometry." In International Conference on Optical Instruments and Technology 2017: Optical Systems and Modern Optoelectronic Instruments, edited by Liquan Dong, Yongtian Wang, Baohua Jia, and Kimio Tatsuno. SPIE, 2018. http://dx.doi.org/10.1117/12.2295337.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Burridge, Robert, Chung Chang, and Yong‐Hua Chen. "Modeling sonic imaging of plane layering from an oblique borehole." In SEG Technical Program Expanded Abstracts 2009. Society of Exploration Geophysicists, 2009. http://dx.doi.org/10.1190/1.3255641.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kumar, Sunil, Dean Wilding, Markus B. Sikkel, Alexander R. Lyon, Ken T. MacLeod, and Chris Dunsby. "Application of oblique plane microscopy to high speed live cell imaging." In European Conference on Biomedical Optics. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/ecbo.2011.80860v.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Oblique plane of symmerty' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography