Journal articles on the topic 'Office layout – Designs and plans'

This study aims to improve the layout of facilities to reduce the distance of material transfer in Karomah Crackers SMEs by using the Systematic Layout Planning (SLP) method in which the procedure consists of three stages, the analysis phase covering the material flow analysis Activity Relationship Chart (ARC) analysis, Activity Analysis Relationship Diagram (ARD), analysis of the needs of the area and available area. The adjustment phase includes the planning of room relationship diagrams and alternative layout plans. The evaluation stage was carried out by selecting alternative layout designs. Based on the Systematic Layout Planning (SLP) method, 3 proposal layouts were produced, all of which had minimized the distance. Layout I can save a distance of 11%. Proposed Layout II saves a distance of 35% and the proposed layout III can save a distance of 30%. So that the layout of proposal I is recommended as a chosen proposal layout.

The paper analyzes the advantages and disadvantages about development of Lianhuatang Village, Chimagang Office, Chibi City, and proposes layout concepts, orientation of layout objectives, executive plans and strategies, so as to carry out new countryside eco-community construction and push comprehensive and harmonious urban-rural development, through which Lianhuatang Eco-Community will be developed into a provincial demonstration spot for new countryside community construction and countryside aged-care as well as an innovative target rod of scale agriculture, facility agriculture and modern agriculture.

Visual privacy is one of the vital aspects of Islamic house designs. This paper aimed to analyze the level of visual privacy in the layout of different residential apartment unit samples in Khartoum, Sudan based on Islamic values and Sudanese culture and how modern apartment unit designs respond to these needs. Models included four units from courtyard-villas and two units from apartment buildings. The architectural layout plans, spatial relation, functions, and space zoning were applied to assess the level of visual privacy of each unit. Findings showed that the courtyard-villas had a higher degree of privacy and cultural values, reflecting more of the Sudanese lifestyle than the apartment units, even though the design of the apartment units pays more attention to the nuclear family privacy. This study would assist designers in enhancing the visual privacy in apartment unit layouts by highlighting factors that diminish or enhance the visual privacy level to create appropriate designs for Sudanese Muslims and Muslims in general.

For architects, intellectual property (IP) law is vital. Without it plans, building designs and models would have no value as others could copy them without payment. But what are an architect's rights and how are those rights retained in order to avoid commercial exploitation?The legislation for this area of law comes from the Copyright, Designs and Patents Act 1988 (CDPA), the Registered Designs Act 1949, the Trade Marks Act 1994 and the Patents Act 1977. IP itself is divided into those rights that are registrable at the Intellectual Property Office (IPO) and those that are not. Rights that must be registered before the work is protected include trademarks, patents and registered designs; IP rights that cannot be registered include copyright and unregistered design rights.

Americans' growing appreciation for excellent landscape design is creating a great need for reputable designers in the residential landscape design industry. Technology affords landscape planners the ability to fill that need with personalized landscape designs through the mail. The use of disposable cameras, overnight mail, computer aided design, computer rendering, telephone, and fax all makes it possible for a designer to acquire a good knowledge of a particular site, quickly design an accurate, high quality landscape design, do several revisions to that design, and give the client a timely return of the design. Southern Living magazine's new department, Custom Landscape Plans, headed by Rebecca Bull, is one example of how this is done. Through a graduate assistantship with Southern Living, I can use these available technologies to design personalized landscape plans all over the south from my office at Clemson Univ. The methods of mail-order landscape design will be discussed in a verbal presentation.

We developed a suite of procedural algorithms for space planning in commercial offices. These algorithms were benchmarked against 13,000 actual offices designed by human architects. The algorithm performed as well as an architect on 77% of offices, and achieved a higher capacity in an additional 6%, all while following a set of space standards. If the algorithm used the space standards the same way as an architect (a more relaxed interpretation), the algorithm achieved a 97% match rate, which means that the algorithm completed this design task as well as a designer and in a shorter time. The benchmarking of a layout algorithm against thousands of existing designs is a novel contribution of this article, and we argue that it might be a first step toward a more comprehensive method to automate parts of the office layout process.

AbstractChallenged by the effects of organisational flexibility and high corporate real estate costs, organisations are increasingly seeking flexibility and operational efficiency in their office spaces. To date, the literature relating to flexible office spaces has focused mainly on their physical characteristics. The full effects of such spaces on human reactions and the corporate culture of organisations are less understood. The objective of this paper is to examine the influence of introducing activity-based working (ABW) on existing organisational culture. It was addressed from the perspective of the management of large corporate organisations. A mixed-method research that included a qualitative approach followed by a quantitative approach was adopted. The first stage included semistructured interviews with 19 large organisations who had introduced flexible layouts. The second stage involved a questionnaire survey of 32 organisations which had experienced office layout changes. Findings identify that the nature of workplace designs has a considerable impact on the corporate culture of an organisation and can be used to leverage and change its culture. Workplace designs directly influence culture by supporting the systems, symbols, engagement/motivation and behaviours of the organisation and employees. However, some differences between the perceptions of public and private organisations were identified. In conclusion, office layouts are artefacts that can either support, or change, the existing organisational culture. Therefore, the critical achievement of workspace design is to integrate the cultures, values and behaviours of organisations to meet their ultimate goals.

Title: Identification of Office Room and Facility Designs as an Effort to Prevent the Spread of the Covid-19 Virus; Case Study of an Architectural and Interior Consulting Office in Bali During the post-pandemic period, many companies have been re-implemented work from the office. Due to this reason, it is necessary to identify whether the design of office space and facilities has implemented standards for preventing the spread of the COVID-19 virus. This study aims to determine the condition of the office space design and facilities in Bali to generate a design according to the standards for preventing the spread of the COVID-19 virus. This study uses a descriptive qualitative method and takes a case study of Bali's architectural and interior consultant building. The analysis is carried out by determining several variables and research indicators referring to the Decree of the Minister of Health of the Republic of Indonesia Number HK.01.07/MENKES/328/2020 and supported by some research results. The results show most of these offices being designed according to the standards for preventing the spread of the COVID-19 virus, such as the layout of the tables/chairs is at a distance of at least 1 meter, the signage designs and accessories guide for workers to adopt a healthy and clean lifestyle, providing dominant natural lighting and provision of the sink, hand sanitizer, and disinfectant. In general, this study shows that the office manager has tried to follow the government's recommendations to prevent the spread of the COVID-19 virus, despite requiring further adaptation to this new habit pattern.

This paper explored the effects of the side proportion of building floor shape on building energy consumption. It is based on the analysis of regression models that were developed in the present study. The simplified building models can be used to conduct a parametric study to investigate the effect of building plane shape parameters on total heating and cooling load. DesignBuilder was used to build and simulate individual building configuration. Energy consumption simulations for forty-eight U-shaped buildings with different plane layouts were performed to create a comprehensive dataset covering general ranges of side proportions of U-shaped buildings and building orientations. Statistical analysis was performed using MATLAB to develop a set of regression equations predicting energy consumption and optimizing floor shapes. Furthermore, perimeter-area ratio (PAR), width ratio, and depth ratio were considered as three factors to characterize the quantitative relationship between floor shape and energy consumption. It is envisioned that the binary quadratic polynomial regression models, visualized as a smooth surface in space and mapped to a vortex image on the plane, can be used to estimate the energy consumption in the early stages of the design when different building schemes and design concepts are being considered.

In this paper we present a mobile augmented reality (MAR) application supporting teaching activities in interior design. The application supports students in learning interior layout design, interior design symbols, and the effects of different design layout decisions. Utilizing the latest AR technology, users can place 3D models of virtual objects as e.g., chairs or tables on top of a design layout plan and interact with these on their mobile devices. Students can experience alternative design decision in real-time and increases the special perception of interior designs. Our system fully supports the import of interior deployment layouts and the generation of 3D models based on design artefacts based on typical design layout plan design symbols and allows the user to investigate different design alternatives. We applied John Keller’s Attention, Relevance, Confidence, and Satisfaction (ARCS) learning motivation model to validate our solution to examine the students’ willingness and verify the ability of students to improve learning through MAR technology. We compared a sample experimental group of N = 52 test-subjects with a sample of N = 48 candidates in a control group. Learning indicators as learning interest, confidence, satisfaction and effective have been utilized to assess the students’ learning motivation through the use of MAR technology. The learning results have been determined by the independent sample t testing. The significance of the post-test had a p-value < 0.05 difference. The result of the study clearly shows that the reference group utilizing MAR technology as a learning aid show a higher learning effectiveness as the control group. Thus, we conclude that MAR technology does enhance students’ learning ability for interior design and making appropriate design decisions.

Modern office building designs tend to increase the window share per facade to make the building more impressive with extensive visibility and well daylit rooms. In general, an increased window share results in higher energy usage and higher costs of heating and cooling, but these disadvantages can be reduced with a more careful design. The aim of this paper is to show the influence of window design and room layout on heating and cooling demand and daylight availability in office buildings in northern Europe. The results in the paper are based on design calculations for two different room types and daylight measurements on two room scale models in a daylight laboratory. The calculations show the influence of window design parameters on the cooling and heating demand. The daylight measurements show the influence of window design parameters on the availability of daylight. The results have then been combined to show a feasible window design regarding daylight availability and the resulting cooling and heating demands for different window orientations. The results show that in most cases it is possible to find a combination of window share and window solar factor that is feasible with regard to daylight as well as cooling and heating. The main finding is that there is a smaller or wider range of feasible designs for different window orientations.

This paper puts forward the concept by green building design on account of "process control" principle which based on the disjoint between architectural design and green building design consultation, as well as the theoretical research focuses on post-assessment way instead of no development in design that currently existed in the green building of our country. By elaboration to the concept of “process control”, it analyzed the key point of the overall process control in green building design. Meanwhile, it raised the solution plans and process control strategies in green building design from the aspects of planning site selection & layout, combination to plane designs & form, facade design & material selection, equipment system selection, material & energy and operation management measures.

The living lab approach to building science research provides the ability to accurately monitor occupants and their environment and use the resulting data to evaluate the impact that various components of the built environment have on human comfort, health, and well-being. A hypothesized benefit of the living lab approach is the ability to simulate the real indoor environment in an experimentally controlled setting over relatively long periods of time, overcoming a significant hurdle encountered in many chamber-type experimental designs that rarely reflect typical indoor environments. Here, we present indoor environmental quality measurements from a network of sensors as well as building system design and operational data demonstrating the ability of a living lab to realistically simulate a wide range of environmental conditions in an office setting by varying air temperature, lighting, façade control, and sound masking in a series of three human subject experiments. The temporal variability of thermal and lighting conditions was assessed on an hourly basis and demonstrated the significant impact of façade design and control on desk-level measurements of both factors. Additional factors, such as desk layout and building system design (e.g., luminaires, speaker system), also contributed significantly to spatial variability in air temperature, lighting, and sound masking exposures, and this variability was reduced in latter experiments by optimizing desk layout and building system design. While ecologically valid experimental conditions are possible with a living lab, a compromise between realism and consistency in participant experience must often be found by, for example, using an atypical desk layout to reduce spatial variability in natural light exposure. Based on the experiences from these three studies, experimental design and environmental monitoring considerations for future office-based living lab experiments are explored.

Nowadays, building energy consumption is responsible for 30% to 40% of total energy usage in many countries. The energy performance of each building is related to many factors. Most of them are determined in design stage. Meanwhile, natural ventilation is one of the most potential passive energy conservation, especially in hot summer and cold winter climate zone. This study aims to figure out how to make the most of natural ventilation in building energy conservation in hot summer and cold winter climate zone. By comparing different building design plans, this study try to provide a method to help find the best-optimized building parameters design solutions. Six main factors are selected, including: building orientation, exterior wall masonry, window wall ratio, shading overhang depth, binds slat angel(include the situation when there is no blinds at all), exterior window structure. A seven-layer office building in hot summer and cold winter zone is modelled and simulated in Energyplus. Two building running plans are compared: (a) the air conditioning system is always on during office occupancy time; (b) the air conditioning system is off when natural ventilation can guarantee thermal comfort inside the building. The results shows, plan (b) saves more than 40% energy on different building parameters designs comparing to plan (a).

We posit that the modern airplane is a social microcosm of class-based society, and that the increasing incidence of “air rage” can be understood through the lens of inequality. Research on inequality typically examines the effects of relatively fixed, macrostructural forms of inequality, such as socioeconomic status; we examine how temporary exposure to both physical and situational inequality, induced by the design of environments, can foster antisocial behavior. We use a complete set of all onboard air rage incidents over several years from a large, international airline to test our predictions. Physical inequality on airplanes—that is, the presence of a first class cabin—is associated with more frequent air rage incidents in economy class. Situational inequality—boarding from the front (requiring walking through the first class cabin) versus the middle of the plane—also significantly increases the odds of air rage in both economy and first class. We show that physical design that highlights inequality can trigger antisocial behavior on airplanes. More broadly, these results point to the importance of considering the design of environments—from airplanes to office layouts to stadium seating—in understanding both the form and emergence of antisocial behavior.

Around 1903–04 there was an outstanding number of sacral design competitions in Hungary, two of which at first glance seem very similar, and their juxtaposition even seemed to be a way of drawing more general conclusions. the Ministry of agriculture was looking for plans for churches in designs for villages to be settled by the state treasury, while the archdiocese of Kalocsa was looking for designs for Catholic churches to be built on the outskirts of subotica. the calls for proposals were for buildings of roughly the same size, a year apart, both seeking a solution to a pressing, long-standing problem. the problem was architectural, simply put: many churches were missing. the tendering process was not cheap, but it was the most efficient way to obtain many plans at once.Comparing the competitions, various aspects were taken into account, firstly, the similarities and differences between the procedures, which were mainly due to the characteristics differences between of the institutions commissioning the work. the second was an architectural analysis, clarifying issues of building size, and then we looked at the characteristics of the design and layout. in this context, we reviewed the texts of the judging reports and made general observations on the two juries. the longer more extended, more professional review was analysed with the aim of reconstructing from the comments, summarising the criteria of the critique, the possible ideal types against which the judges compared the entries.As a result, we have registered a kind of transition in sacral architecture in the mid-1900s, in which traditional form and spatial shaping were dominant, but also the signs of a later formalisation that would come to fruition in the 1910s. this transition can also be observed in professional texts on architecture, which evolved into professional writing that flourished in the years leading up to the First World War.

Airport control hall is the key organization of air traffic control system, mainly used to manage various flight activities of the airport. The control hall contains numerous control seats and control personnel. It is particularly important to create a comfortable indoor environment for the control personnel in a high-intensity working environment. But due to the current design code and standard lack for airport control hall and affiliated offices of the requirements of the physical environment, designers often excessive attention to functional requirements in the design and the facade, while ignoring the control hall indoor environment requirement, so the chaos such as plane layout, facade window problems such as unreasonable, As a result, natural ventilation is not smooth, air conditioning energy consumption increases, and indoor comfort is seriously affected.Sining AIR traffic control Support Building is one of the three major air traffic control projects in northwest China during the 13th Five-Year Plan period. In the preliminary design process of the scheme, the design team used Butterfly tool based on Grasshopper software to conduct computer simulation analysis on the natural ventilation condition of the scheme, comb out the optimization design method and conduct comparative verification. Improve indoor comfort, reduce building energy consumption, and finally summarize the air traffic control hall design strategy adapted to Sining’s unique natural environment, which provides reference for other air traffic control support building projects in northwest China.

Virtual Reality (VR) is increasingly used in everyday contexts for a variety of tasks. We particularly look at the confined space for passengers inside cars, where head-mounted displays (HMDs) could complement the prevalent use of mobile devices for work. In a field study (N=19), we tested three mobile workspace setups along the reality-virtuality continuum (Mounted Tablet, Augmented Focus Bubble, and Virtual Office) and let users re-position the virtual keyboard and display while typing on a physical keyboard in a parked car. The results revealed that using HMDs lowered users' awareness of their real surroundings but increased their perceived workload with a performance impairment of text entry rate compared to just using a tablet. Letting users customize their workspace layout improved their perceived performance and decreased pitch-axis head movements for switching between the virtual display and keyboard. This paper discusses challenges and strategies for future work regarding dynamic incorporation of productivity tools, adaptive mixed reality (MR) work environment designs, and optimizing upper thresholds of physical discomfort in mobile MR workspaces.

The battery thermal management system plays an important role in the safe operation of a lithium-ion battery system. In this paper, a novel liquid cooling plate with mini-channels is proposed and is improved with disturbance structures. First, an accurate battery heat generation model is established and verified by experiments. The error is less than 4%, indicating the heat generation power is reliable. Then, five designs are proposed first to determine the suitable number of disturbance structures, and plan 3 with five disturbance structures shows a satisfying performance in heat dissipation and flow field. Moreover, four layout plans are proposed, namely uniform, interlaced, thinning, and gradually denser distribution. Results show that plan 5 (uniform) achieves the best performance: the maximum average temperature is 36.33 °C and the maximum average temperature difference is 0.16 °C. At last, the orthogonal experiment and range analysis are adopted to optimize the structure parameters. Results show that the best combination is space between adjacent disturbance structures d1 = 20 mm, length d2 = 5 mm, width d3 = 1.5 mm, and tilt angle β = 60°.

The article brings twelve unknown designs and projects of Rijeka’s sculptor and altar maker Antonio Michelazzi (Gradisca d’Isonzo, 1707 – Rijeka, 1771). The earliest two designs, dating from 1750 and linked to the island of Krk, are today preserved at the Archivio di Stato in Venice. One is a ground plan and assessment of a public ruin in the town of Krk, and the other a panoramic view of the Omišalj bay. A newly discovered document clarifies Michelazzi’s commissioning by the Trieste administration in charge of Rijeka, Senj, and Karlobag, since Empress Maria Theresa appointed him the imperial-royal architect in 1755. In that capacity, Michelazzi worked on a dozen plans and projects for public works in Senj and Karlobag during 1757 and 1758. He drew a map of Senj with a project for modernizing the city port and its defence against stormy winds. A particularly important project was his plan to redirect the stream that ran through the town into the harbour of Senj, for which he designed a new riverbed. There were also projects for prisons in the citadel, a health office, a slaughterhouse, and butcher shops. In Karlobag, he made a project for the renovation of the citadel, butcher shops, a new cistern, and a public administrative-residential building on the main town square. His last design and project was a new slaughterhouse with butcher shops in Rijeka in 1770. Although most of Michelazzi’s designs were never put in practice because of the lack of finances, the designs published here are the first of this kind in his known oeuvre, which will certainly grow further, since he was also involved in architecture besides sculpture and altar making.

Abstract The spread of COVID-19 has been recorded as one of the most severe worldwide pandemics. Workplaces are a germicidal environment for spreading viruses due to their high occupation. As a response, international health, safety, and architectural organizations have published pandemic-related guidelines to create a safe working environment for the employees. Covid-19 has impacted reshaping the internal architectural workspace design. The research shall review the published international organizations’ guidelines on workspace design and its architectural interpretations established by international design companies, which seek to create safer designs for workplaces post-pandemic. This study is a concise review of the workplace-related guidelines and precautions published by health and safety and architectural organizations such as WHO, CDC, OSHA, ASHARE, AIA, AHIA, and ILO. Secondly, aggregate data has been developed to frame and compile the design interpretations of the published pandemic guidelines recognized by several international architecture and furniture companies which has been interpreted into architectural plans of the common spaces of the office buildings. As a result, a matrix table was created which includes the common spaces in office buildings and their post-COVID architectural solutions. This matrix shall be used as a tool to be employed as a guide for design consultants in designing healthy workplaces that are resilient to airborne pandemics, which shall benefit in revisiting the architectural standards according to the published workplaces Pandemic guidelines.

The history of the kitchen has received much attention from designers and design historians. Since the writings of Catharine Beecher, designers, household engineers, and others have written about the importance of the kitchen as the center of the home. This research traces the impact of the writings of theorists such as Frederick Taylor, Georgie Boynton Child, Helen Binkerd Young, and Christine Frederick on the designs produced by the architects in the first quarter of the 20th century. Frederick’s work took the concept of an efficient kitchen to a new level applying movement studies and introducing new ideas to the kitchen layout and arrangement. In a properly laid out and equipped kitchen, steps were saved by placing kitchen cabinets, ovens and stoves, refrigerators and sinks where they were needed in the sequence of food preparation and delivery to dining table as well as clean up after the meal. In her books, she also provided advice on a variety of considerations, such as appliances and accessories, lighting and ventilation; materials, finishes and color; and appliances and equipment. In 1919 a group of architects dedicated to improving the housing stock in the United States through good design banded together to form the Architects’ Small House Service Bureau (ASHSB). Their first plan book, How to Plan Finance and Build your Home published in 1921, also encouraged labor-saving kitchen design and provided advice on kitchen design. The research reported here assesses how the influence of Frederick and Boyton’s advice as reflected in the work of and interpreted by Helen Binkerd Young is demonstrated in the kitchen designs of the ASHSB’s first plan book. A plan content analysis instrument, developed using Frederick’s writings and edited to include other variables from Young and Child, is used to analyze the 99 kitchens and two essays in the ASHSB’s plan book. The plans and accompanying comments evidence enthusiasm for the concept of scientific management and other labor- and energy-saving concepts promoted by Frederick. Many of her specific suggestions are incorporated in their kitchen designs, but there is limited evidence that ASHSB designs are only influenced by Frederick but rather include other popular labor-saving concepts of the early 20th century.

One of the less-known and less researched regions of the Carpathian Basin is Sepsiszék, which as part of Háromszék County, was one of Greater Hungary’s southeastern frontier-guard areas. After the Reformation, the population of the region became almost exclusively the followers of one of the Protestant tendencies with Calvinism gathering the most members. Due to the location of the area, Sepsiszék and its vicinity – the former territory of the county - is home to Europe’s easternmost Protestant communities to this day. Thanks to the unique cultural, religious and social environment, the unique development of local church designs notably enriches the history of Protestant religious architecture.The survey documentation of the area’s 32 Calvinist churches along with the schematic analysis of architectural history was carried out during the summer of 2015. The central question of the research was how did the assessed churches accommodate the spatial demands of the new liturgy, and what tendencies can be identified regarding the shaping of the space. The interior layout, galleries, additions to the buildings, the proportions in the floor plans and spatial ratios will be the topics through which these questions will be answered. After tracing the locally observable main characteristics of Protestant spatial formation, similarities with Hungarian and international examples will also be explored.

The person of the architect Friedrich Fischer has been somewhat forgotten, even though he played a meaningful role in the beginnings of the existence of the Free City of Gdańsk as its first conservator and the first head of the Ground Construction Office. Before and during WW I Fischer worked privately as an architect, mostly in the Gdańsk and Sopot area, and among chosen projects one located in Wrzeszcz, in Uphagena Street, as well as the architect’s own house at 30 Stefana Żeromskiego Street in Sopot can be named. Fischer was also a scholar who obtained a doctorate in 1910 and prepared a postdoctoral thesis, as well as a lecturer at the Department of Architecture at the Technical University (until April 1925). In 1918, he became involved in building administration, carrying out projects for the Housing Estate Office, of which he was the head. He created designs of the street now known as Hallera Street in Wrzeszcz and plans of green areas on former fortification grounds. He also initiated works on the plan of Great Gdańsk, eventually known as the ‘Althoff plan’. In 1923–1925, he was the head of the Ground Construction Office. From this period his designs of the first version of the school in Pestalozziego Street in Wrzeszcz and the unrealised fair building in Gdańsk are known. He designed the completed housing estates in today’s Zbyszka z Bogdańca and Dubois Streets in Gdańsk - -Wrzeszcz as well as several churches for the Catholic community of the Free City of Gdańsk: St Anthony’s Church in Gdańsk -Brzeźno, the Church of Our Lady of Sorrows in Głęboka Street in Gdańsk - Knipawa, and the Church of Christ the King in the small town of Piekło, in the former Wielkie Żuławy District. Fischer was active as Conservator of Architectural Monuments for four years. During this period the function of Conservator of Historical Monuments was merged with the function of the head of the Ground Construction Office. During his service as conservator the preservation of the historical form of the city became a priority The model of proceedings in the Free City area established by Fischer constituted an important point of reference in the following years. He was also involved in the preparation of the Preservation of Historical Monuments Act proclaimed in 1923. In March 1925, Fischer moved to Hannover, where he became associate professor specialising in medieval architecture. He remained in that city and at its university until his death.

Boja Market is the main market in Boja District, Kendal, Central Java. Products from agriculture (fruits and vegetables) as well as industrial goods (clothing and electronics) can be sold in this market. Boja Market experienced a fire accident in 2007. As a result, traders suffered losses in the form of burned goods and trading activities in the market were hampered because traders lost their places to trade. Therefore, it is necessary to do fire prevention efforts to prevent fires from occurring. The purpose of this study was to design fire prevention efforts in the Boja Traditional Market, Kendal Regency based on the standard. This research is qualitative descriptive research. The research uses in-depth interviews and field observations, then the existing data is compared with standards for further analysis and design processes. The variable in this study is fire prevention efforts, includes: fire management and fire fighting facilities. The results of the study carried out a comparative analysis with applicable regulatory standards. The proposed design for supporting fire prevention efforts include: organizational structure for fire prevention, standard operating procedures for fire prevention and design of fire facilities layout plans. Traditional Boja Market, Kendal Regency, has carried out fire prevention efforts but has not been maximized so that researchers provide suggestions in the form of designs that are expected to be applied in the market.

Purpose This study aims to focus on the passive components of System in Package SiP modules and discusses the geometric pad designs for 01005-sized passive components, the front end design of the hole size and shape of the stencil and the parameters of the stencil sidewall coating, to determine the optimum parameter combination. Design/methodology/approach This study plans and conducts experiments, where a L8(27) inner orthogonal array is built to consider the control factors, including a L4(23) outer orthogonal array to consider the noise factor, and the experimental data are analyzed by using the technique for order preference by similarity to ideal solution multi-quality analysis method. Findings The results show that the optimum design parameter level combination is that the solder mask opening pad has no solder mask in the lower part of the component, the pad width is 1.1 times that of the component width, the pad length is 1.75 times that of the electrode tip length, the pad spacing is 5 mil, the stencil open area is 90% of the pad area, the stencil opening corner has a 3 mil chamfer angle, and the stencil sidewall is free of nano-coating. Originality/value The parameter design and multi-quality analysis method, as proposed in this study, can effectively develop the layout of passive components on a high-density SiP module substrate, to stabilize the process and increase the production yield.

Abstract A holistic education that deals with teaching methods and the learning environment in which students can be introduced to the concept of sustainability and understand its educational objectives. Thus, the school garden can serve as a tool to introduce students to the features of a sustainable lifestyle, transforming educational buildings into a sustainable job (Papadopoulou 2020) With the growing concern for the environment, it emphasizes the role of the school garden in the educational process, as a tool for environmental education and reconnecting children with nature, Its inclusion in the school curricula made the school garden an integrated educational environment (Sealy, 2001). The research was designed by selecting a sample of private kindergartens in the city of Baghdad for the purposes of the scientific study. The field sites for the study samples, the personal interview, the preparation of distribution maps for private kindergartens, Geographical information systems, and the analysis of architectural plans drawn according to AutoCAD 2019, the data was unloaded using the “Microsoft Office Excel” program. The most important results of the study showed an inverse association between green space and No. of children in The selected private kindergartens and the strength of the association is very weak, not significant, amounting to (-0.6887) while it was found that the alsaaeat althaamina kindergarten possesses a diversity of plants and all kinds of games and conforms to the basic pillars of sustainable designs with a degree of 95%. The square are the two dominant shapes in outer space for all of kindergartens

<p>The intention with this article is to describe current exhibition practices at some Norwegian fine art- and design museums and to relate these practices to the visitors and their experiences, by comparing data concerning the plans and interior designs of gallery rooms and the organization of the displays.</p><p>This investigation is based on data from a survey of 19 permanent exhibitions in 12 fine arts and design museums, conducted in 2011–12; the Norwegian museum architecture and museum displays with its more than 100 year old traditions; and Charlotte Klonk’s book <em>Spaces of Experience: Art Gallery Spaces from 1800–2000</em>.</p><p>The survey shows that the purpose built museums to a large extent have kept their original layout and the organization of rooms. The non-purpose built museums tend to imitate the museums from the 1800s, within the limits of their given architecture. Different types of specially designed rooms are found in all buildings, regardless of age and purposes. Regarding the organization of displays, the most frequent principle is a combination of historically chronological types and themes. Almost as frequent are strictly historical chronological displays and thematic displays without any historical narrative.</p><p>Hence, the comparisons reveal that there are no fixed patterns regarding the historical types and the conventions concerning the relationship between the museum architecture and organization of the displays, which lead to the conclusion that today there is no general curatorial strategy in Norwegian fine art- and design museums with regard to the visitors’ experiences.</p>

Service learning is a technique in which instructors integrate community service into their semester curriculum to enhance the learning experience. Service-learning teaching strategies naturally fit into horticulture and landscape design curricula, since hands-on laboratories are often incorporated into lesson plans. The purpose of this study was to integrate service-learning techniques into a university-level horticulture course and measure the impact of the course on students’ perceptions of community involvement, perceptions of social impact, and perception of how well the students felt they learned the course material. Students in an undergraduate landscape design class were taught the process of landscape design using service-learning activities within the city and campus communities. Projects included developing designs for campus gardens, the city post office, neighborhood parks, the campus childcare center, city road median areas and the city women's shelter, and other projects. A survey tool was developed from other existing surveys to measure how students felt about service learning as a means to learn skills in class and to measure their perceptions of community involvement and social impact. Currently enrolled students were surveyed and alumni from five classes taught in a similar manner in previous years were surveyed. Results from the study showed major differences in that students felt more positive about community involvement after the course compared with before the course. Students rated their feelings of social impact and learning course material above the neutral levels in both categories. No differences were found in gender and grade point average (GPA) comparisons in any of the categories, with the exception of the social impact statements with males and students with higher GPAs rating their feelings more positively within that category. Additionally, differences were found in comparisons of alumni vs. current students, with alumni feeling more positive about how well they learned course material compared to current students.

Abstract- Flexibility and Configurability software is important to accommodate a variety of managed data. In the graduation ceremony, the committee needs to arrange the graduation floor plan based on the provisions of each institution. The order of seating is adjusted based on the order of graduation of graduates with provisions agreed to each graduation period, such as the technical dimensions of the room and the order of priority of the predicate. During this time, the spreadsheet application used by the committee was inflexible. If the number of graduates increased or dimension of the blocks and floor plans is changed, the committee cannot flexibly change the plan. The factor of application flexibility and ease of configuration is needed. To support the flexibility of the configuration, the researcher observes the parameters of the sequence and floor plan, designs the database, displays the interface and adapts the activities carried out by humans into the system to automate the process of drawing a digital floor plan. The system requires graduate data, graduate predicate data, graduate faculty data, faculty sequence data, and floor plan data as preliminary data. The implementation of the stack can help the graduation of data storage implementation. With a flexible system, the committee's activities are reduced by 50% and the complexity of the committee's work is not influenced by the amount of graduate data. Adjustments to the layout of digital plans can be done at any time thereby increasing the flexibility of the committee in making decisionsKeywords: configurability, digital floor plan, graduation, stack Abstrak- Perangkat lunak yang dirancang dengan kemudahan konfigurasi dan fleksibilitas sangat diperlukan saat ini untuk mengakomodasi berbagai macam data yang dikelola. Dalam upacara wisuda, panitia perlu mengatur denah duduk wisudawan berdasarkan ketentuan masing-masing institusi. Urutan tempat duduk disesuaikan berdasarkan urutan pemanggilan wisudawan dengan ketentuan yang disepakati setiap periode wisuda, seperti teknis dimensi ruangan dan urutan prioritas predikatnya. Selama ini, aplikasi spreadsheet yang digunakan oleh panitia tidak fleksibel. Apabila jumlah wisudawan bertambah ataupun adanya pengubahan ukuran blok dan denah wisudawan, maka panitia tidak bisa secara fleksibel mengubah denah tersebut. Peran fleksibiltas aplikasi untuk menggambar denah secara digital dan kemudahan konfigurasi dibutuhkan. Untuk mendukung fleksibilitas dari konfigurasi tersebut, peneliti mengobservasi parameter penyusun urutan dan denah, merancang basis data, tampilan antar muka dan mengadaptasi aktivitas yang dilakukan oleh manusia ke dalam sistem untuk mengotomatisasi proses penggambaran denah digital. Sistem memerlukan data wisudawan, data predikat wisudawan, data fakultas wisudawan, data urutan fakultas dan data dimensi denah sebagai data awal. Penerapan struktur data stack membantu dalam mengimplementasi penyimpanan data wisudawan. Dengan sistem yang fleksibel, aktivitas panitia menjadi berkurang 50% dan kompleksitas pengerjaan panitia tidak dipengaruhi oleh jumlah data wisudawan. Penyesuaian susunan denah digital dapat dilakukan sewaktu-waktu sehingga meningkatkan fleksibilitas panitia dalam mengambil keputusan.Kata kunci: denah digital, konfigurabilitas, stack, wisuda

Research Highlights Despite of many historical records from Portuguese about the physical of Melaka Malay City, its existence is still doubtful since there is no clear physical evidence that can be used as basis support to its existence. However, to prove that the city was existed, various physical and scientific evidence are required to prove its existence. Thus, this study aims to identify historical evidence that mentioned its existence which based on the first painting of A’Famosa (Malacca Fort City during Portuguese era). The study proposed three hypothesis and results indicated there is a postivie outcome to prove that the Melaka Malay City existed on and around Bukit Melaka (or St Paul Hill now) based on historical records and sketches found. Research Objectives This paper attempts to uncover and reveal the historical evidence of Melaka Malay (Fort) City before the city was destroyed and rebuilt according to Portuguese terms. This paper was created to identify the differences between designs and layout plans between the Malacca Malay (Fort) City and the world-renowned Fort A’Famosa, thus comparing the hypothesis arguments about the existence of Melaka City. Indeed, there is a clear distinction between the design, layout, character and philosophy of the Malay and Portuguese cities. The scope focuses only on the site of the physical building (which is believed to be historical evidence) of the city at the Melaka River’s estuary where important and significant buildings during Melaka Malay empire was constructed – the palace, mosque, administration buildings, harbors, and different kind of settlements. There is a great probability of continuing this study into the use of satellite technology in determining and identifying the Melaka Malay City with more precise and accurate details. The implication of this study can be a catalyst for continuous and deeper research on the original site of the Melaka Malay City as to prove the validity of its existences. Methodology In an effort to discuss the existence of this Melaka Malay City, various aspects and methods were conducted to find the most suitable matches and comparisons that almost accurately describe their design then prove its existence. The remains and plans of Melaka City today since the British era will be the basis of its existence. Hence, the study of historical records and sketches of the Melaka City from the Dutch government and subsequently the Portuguese will be made to seek physical evidence of the earliest design of Melaka City. Later, the historical records of the city from Malay Archipelago, Chinese, Portuguese and Dutch sources will be depicted in city design. As a reinforcement, the philosophy of urban design in the Malay World is highlighted as well as presenting the comparison between the other Malay Kingdoms and the Melaka Malay City. Results The foundations of the Malay cities basically were designed in square or rectangular shape, no matter how far the city was set up (Abdul Halim Nasir, 1990). This is in line with the philosophy in the Malay world that associated with a simple yet sufficient form of compassion that covers the various aspects of the Malay community's facilities and their living that are synonymous with modular systems (Yusoff Hashim, 2010). The first Fort A'Famosa built by the Portuguese was rectangular (G.W.Irwin, 2006). Its position was below the foot of Bukit Melaka and along the estuary of the Melaka River which is also near the bridge stretching the mouth of the Melaka River (Portuguese Documents of Malacca, 11: 6 de Goes, para 11). The city of A'Famosa in the painting has a relatively six-tower on the corner of the city near the bridge. Whereas city fort or bastion on three other city corners are two-storey building. A’Famosa was built on the site of the Great Mosque of Melaka (Portuguese Documents of Malacca, 11: 6 de Goes, the 25th) which features a rectangular shape as the custom of mosques designs in the Malay Archipelago realm at that time, then the A'Famosa was originally built in rectangular over the ruins (or damage) of the Great Mosque Malacca after the success of Portuguese colonization. Findings The research showed that the design of Melaka City or A'Famosa City was in square or rectangular shape as it was built on the ruins of the Great Mosque of Melaka. The rectangular fort design was synonym with the design of other Malay forts or cities as it was a fundamental design tradition in the Malay world from fourth century until the later centuries after the collapse of Melaka empire either in Malay clusters. This coincides with the urban philosophy and design of the Malay and Islamic city that breed in the Malay Archipelago region at that time.

Background: As part of student research at St. Petersburg architectural-construction University continues to develop alternative proposals for the creation of a circumferential highway at the boundaries of communication areas of St. Petersburg and Leningrad region. The article presents the results of research works on optimization of routing highways, according to the architectural layout of buildings, transport hubs, to study the effects the pre-tension of the puffs and the guys at the reduction of efforts and deformations of the main elements of the highway, the calculations of the designs of the most high and loaded sea area. The construction of the 8-high-speed transport highway was upgraded due to restrictions related to the reconstruction of Levashovo and Pulkovo airports, the transfer of the capital of the Leningrad region to Gatchina, and linking to the promising metro stations Strelna, Yanino and Kudrovo. The upgraded scheme of the highway is proposed in the form of an open polygon with transport and interchange nodes in the corners and is based on load-bearing trestle structures of arched-cable design that provide the necessary functionality, reliability and safety. Aim: development of a district high-speed transport system on the borders of St. Petersburg and the Leningrad region, based on the widespread use of electric transport, with passenger traffic comparable to the metro line. Materials and Methods: trestle structures are designed for combinations of operating loads, forces and impacts, including consideration of dynamic aspects and non-linearity, using the "SCAD Office" software package. Results: based on the results of variant design, an arch-cable-stayed version with spans of 180 m and 360 m was adopted as a supporting structure according to the metal consumption criterion, which became the basic one for building a highway of overpass design. From an approximate calculation, it follows that the cost of building a highway on land plots (two-track scheme) compared to the construction of the metro, it is expected to be 5-6 times lower, and on the sea sections 3-4 times lower due to high pylons and deep pile foundations. Conclusion: the estimated volume of passenger traffic per day for the two-track high-speed and two-track high-speed highways will be 208 thousand passengers, and 76 million passengers per year, which is quite comparable to this indicator for the metro line.

Background/Context There is general agreement that most public high schools should be smaller than they are. Although the small-schools movement attracts considerable support, there is a general reluctance or inability to close large schools and to build many new small schools. A more cost-effective approach is to divide larger high schools into several smaller units, typically called schools within schools (SWS). We use the term subunit to describe these smaller educational groupings, which are generally organized around themes, careers, or pedagogical approaches intended to appeal to students’ interests and future plans. The majority of SWS designs then allow students to select their subunits. As such, the SWS model represents a convergence of two popular reform efforts—the movement to create smaller high schools, and the push to increase educational choice. Purpose/Objective This article addresses three questions related to academic differentiation and student choice within SWS high schools. First, to what extent did subunit themes emphasize students’ disparate occupational and educational futures over their common social and academic needs? Second, what rationales did students offer for their subunit selections, and how did their choices reflect their interests, motivations, social backgrounds, and academic abilities? Third, how can we characterize the interplay between subunit offerings, students’ subunit choices, and educational equity? Research Design This article draws on data collected over several years in a sustained field-based study of five SWS high schools. Our data collection included conducting individual and focus group interviews with students, teachers, guidance counselors, and school- and district-level administrators; shadowing students; visiting selected classrooms; observing interactions in hallways and other public locations; attending special events that occurred during our visit; mapping the physical layout of the building; collecting papers and documents pertinent to school life; and learning about the contexts in which the school operated. Conclusions/Recommendations Each school offered subunits organized around academic subjects, career focuses, or pedagogical approaches. Certain subunits were designed for students seeking traditional vocational training, whereas others targeted academically motivated college-bound students. Although students ostensibly selected subunits that matched their interests and motivations, varied social and structural pressures beyond subunit themes influenced their choices. As a result, to varying degrees within schools, subunits were segregated and stratified by student race/ethnicity, social class, and—above all—academic performance. With stark parallels to student curricular choice in comprehensive high schools, many school staff viewed these within-school divisions as the natural (and even appropriate) outcome of student social and academic difference.

The energy transition momentum currently sweeping through the oil patch has prompted corporate rebranding, heightened investment in renewables and a genuine sense of responsibility over the amount of harmful gases that industries release into the air. Beyond emission reductions, carbon capture and storage (CCS), viewed as a novelty by some just a few short decades ago, has leaped to the forefront of greenhouse-gas management solutions, with big players committing big money to projects aimed at ensnaring, transporting, and burying the waste deep underground. Last April, ExxonMobil unveiled plans for a $100-billion CCS hub for the Port of Houston. Dubbed the CCS Innovation Zone, it is expected to be a public-private partnership that will attract participation and funding from companies and government entities. In September, the supermajor went on a buying spree in the shallow-water US Gulf of Mexico (GOM) as part of federal Lease Sale 257. It was the apparent high bidder on 94 tracts to the tune of just under $15 million. While these are presently structured as hydrocarbon leases and the company has kept mum on its motivations, the move was almost certainly to gain access to coast acreage that could potentially serve as subsurface storage locations for the proposed Houston hub. Following the lease sale, Spanish operator Repsol said it had partnered with US independent Cox Oil to jointly explore CCS opportunities on the private operator’s shallow-water GOM acreage. Under the terms of the agreement, the consortium will share technical knowledge and resources to evaluate potential projects that would combine the offshore expertise and operations of Cox Oil with Repsol’s technical knowledge and global experience with CCS projects. Then there is Talos Energy. The Houston-based independent has jumped feet first into the CCS pool, announcing a pair of US-based projects with designs on making carbon capture a steady revenue contributor over the coming years. Early in 2021, the company evaluated various green businesses where it could make a difference—and a dollar—including carbon capture, but also wind and wave energy. At that time, CCS was more of a peripheral discussion, but as the company took a closer look it became apparent that its skill set and investment profile lined up best with a role in carbon capture. By April, the company was presented with the opportunity to propose a CCS solution solicited by the State of Texas’ General Land Office (GLO).

Learning outcomes To appreciate the importance of carefully carving out a unique target group of customers and differentiating the offerings by establishing a brand born on the internet. To appreciate the criticality of balance between growth and quality. To appreciate the entrepreneurial dilemma of growth vs control while making difficult business growth choices. To analyse the alternative growth options in the context of the Su and Ta’s concerns and offer decision choices to go with the organizational ethos and business goals. Case overview/synopsis Three years back in Mumbai, India, Sujata and Taniya took a decision to quit their well-paying jobs and launch Suta, their small yet dynamic entrepreneurial venture of smart office wear for women. Sales had grown rapidly from INR 1.5 crore in 2016 to INR 5 crore in 2018. In March 2019, they found themselves at a crossroads: Should they bring in investors to accelerate their plans for growth and risk losing control or depend on organic growth? That would mean depending on operational cash flows to scale their business at a pace that would ensure that they did not compromise the quality of their operations, products and hence customer experience. The sisters had nurtured Suta’s brand image in the minds of their customers, through distinctive designs, quality processes, exemplary customer service and experience. All this through a strong yet responsible supply chain that nurtured weavers in rural India. They wanted both the brand and the many weavers who were dependent on them for work and livelihood, to grow. They had seen enough examples where the pursuit of growth had resulted in the quality of product and customer service suffering, along with employee attrition and process failures. They were very apprehensive of adopting the greedy for growth model through investor funding that many start-ups had followed and which eventually compromised their customer experience. The question clearly was not if they should grow, but how should they grow. Complexity academic level This case is designed for use at the postgraduate level in courses on entrepreneurship, business strategy, strategic management and strategic marketing, as well as in executive management programs. It can be used at the beginning of a course or toward the middle, to set the context for the course. The case will help instructors focus on the unique situation of a company “born on the internet,” which has to manage the current growing business while making a choice for growth in an emerging market where e-commerce channel is rapidly becoming popular. Supplementary materials Teaching Notes are available for educators only. Subject code CSS 3: Entrepreneurship.

This article is the fourth of the general topics«Development and formation of architectural and construction traditions of the steppe and forest-steppe zones of Ancient Russia. In the process of studying historical and archaeological facts, tere arefollowing:The main type of settlements of the early medieval period of the 5th-7th centuries in all territories of Slavs' residence –uninhibited villages along the banks of rivers and lakes on low floodplain terraces with an area of 0.25-1.0 ha, but in Moldova -up to 1.2 ha, in Podolia –up to 1.5 ha, inSmolensk –up to 7.0-8.0 ha. In the Upper Dniester and Upper Dnieper, the location of settlements is «nesting» with a distance between «nests» of 0.3-0.5 km. Layout –ordinary along the coast according to the terrain. Settlements of 3 types: tribal trade and craft centers, shelters and religious centers. Refuge settlements were built in the Upper Dnieper Left Bank, in the Upper reaches of the Western Dvina, in the borderland with Finno-Ugric and Germanic tribes, especially in the Upper Oka basin, where the main type of settlement settlements. They are trade and craft centers of permanent residence, asylum-fortifications were built separately.Placement of settlements -suburban protected areas, additional fortifications -ramparts and ditches, wooden walls with crates along the inner perimeter of the walls, their area is 0.2 -0.3 ha. Ancient settlements-cult centers inSmolensk region had similar fortifications.Dwellings –everywhere rectangular plans (or close to them, with gable roofs covered with a layer of clay or resin, rammed earthen floors.Space-planning decisions in all territories of Slavs' residence are of the same type, the differences are only in wall designs, which depended on climatic conditions, and in the placement of heating devices: among Slavs, stove-stoves and clay in the corner of dwellings, among neighbors of the Slavs (Balts and Finns) –foci in the middle of dwellings.So in the Southern region there are half-dugouts and ground pillars and log houses with a hearth in the center or a stove with a stove in the corner of the outbuilding.In the Northern region there are rectangular log cabins with astove in a corner. In the Western region, there are half-dugouts and terrestrial columnar and log-house constructions with centers in the center or a stove-heater in the corner.Definitely religious buildings –pagan luminaries. Found only in the Smolenskregion. They are round, rammed, a platform with a diameter of 6 m, along the edge of which is in the center of the site.The burial facilities of the early period of the Slovenian middle ages ubiquitous soil burial grounds and mounds are mainly accordingto the rite of incineration.Thus, the construction and architecture in all areas of the Slavs and their immediate neighbors to the VIII century –of the same type. This situation in the Steppe continued in the Middle Ages, when the Turkic-speaking Huns invaded the Steppe in the Middle of the 4th century wich is putting an end to the centuries-old domination of the Iranians and causing the grandiose movement of European peoples –«The Great Relocation».Development and formation of architectural and construction traditions of the steppe and forest-steppe zones of Eastern Europe from the 5th to the 7th centuries –The early stage of the early Slavic Middle Ages –is considered separately for the forest-steppe and steppe zones. The development of constructionin the steppe zone, through which the namada of the Hun circle moved west, is represented only by random mounds, often inlets, left in the Steppe from the previous time. All types of structures of the settled population of the forest-steppe zone that havedeveloped earlier were developed in this period. The early Slavs, the formation of whose ethnicity began in the III century. BC., to the V century. n. e. the main types of buildings have developed, which have had a special development since the 5th century. n. e.

Purpose This paper aims to focus on determining the effects of location of closed offices on the front facade, rear facade and side facade plans and the indoor layout (left and right users’ cabinets) on perceptual evaluations of users of physical environmental factors. Design/methodology/approach For this purpose, the responses of 54 academic users who use the Gazi University Technology Faculty Taskent Building offices were taken with the help of a survey. Findings As a result, it was determined that office users on the front and side facades generally perceived more positively the offices’ environmental factors than office users on the back facade. In addition, it was determined that offices with storage cabinets located to the right of users (Type A) were perceived more positively than storage cabinets located to the left of users (Type B). On the other hand, it was determined that users between the ages of 25–45 who used closed offices generally perceived the physical environmental factors of offices more positively than users between the ages of 46 and 65. Originality/value Especially the location of the building, the landscaping, the plan of the rooms and the landscape to which they are directed are major design decisions that cannot be controlled by employees. Therefore, it is necessary to know the positive/negative effects that may occur during use before making design decisions.

PurposeThis research presents a multi-objective optimization approach to integrate spatial planning measures in open-plan office environments in order to lower the risk of a workplace contagion. These measures were gathered, formalized, parameterized, and coded and integrated into a digital tool.Design/methodology/approachTo demonstrate the research's approach, a simple design problem was designed, explored, and the results were evaluated. The researchers assumed an empty open office space, with the windows and doors (as exits and/or as access to amenities) already in place (Figure 1). The aim is to optimize the space planning, with the following objectives in mind: maximize the number of employees in a floor while maintaining physical distancing recommendations for avoiding infections; no face-to-face or back-to-back seating positions are allowed; maximize physical access to windows for natural ventilation; minimizing areas with potential “congestions” in the space, i.e. areas susceptible to overlapping foot traffic from numerous employees, which increases the potential for close encounters and minimizing the travel distance from the employee's desk to all neighbouring desks, hence reducing the foot traffic in the space. In the experiment, the following was assumed: the workspace layout is rectangular, the workstation desks are rectangular, the seating area, windows, and access to exits and amenities are well-defined.FindingsIt was found that configurations with desks parallel to the longer side of the space provided more employee capacity; however, they usually performed poorer in terms of the buzz score. On the other hand, configurations with desks perpendicular to the longer side of the space had, on average, better buzz scores, usually at the cost of the reduction of the number of potential employees. There was however one alternative in the latter set of configurations, which achieved above-average buzz and adjacency scores, and the potential to accommodate 56 employees, one of the highest capacities for employees in the solution space (the highest being 60). Designers could explore the design space further to make sure it complies with these basic spatial rules for mitigating the spread of infections, while experimenting with the workspace layout.Research limitations/implicationsIt is important to note that in order for a designer to handle any given design problem even with the aid of a computer system, it is important to provide a set of initial conditions and assumptions and a set of variables. In the universe of all possible variables, the designer can pick a number of variations of the initial conditions and run parallel experiments to compare their outcomes. In the experiment demonstrated here the following was assumed. The workspace layout is rectangular with predefined entrances/exits. Free flow of employees is allowed. No pre-set one-way paths. The workstation desks are rectangular. The seating area windows and access to amenities are well-defined.Originality/valueThis research presented a digital optimization approach to enhance the spatial planning process in open-plan office spaces, with the aim of mitigating the risks of infectious diseases' transmission. Spatial design considerations were gathered from literature and formalized as design objectives and constraints, then further parameterized and represented as numerical values and scores for objective evaluation. The design parameters, constraints and calculations to derive the scores for the designated design objectives were coded into a digital tool that can receive a building information model (BIM) model of an office space and provide preliminary furniture plans using a multi-objective optimization (MOO) approach. It is obvious that the furniture layouts that can be considered “acceptable”, based on this approach, are not considered “ready-to-implement” solutions, because designers need to integrate a multitude of other design factors in their design. This approach can still, however, be useful to help the designer integrate spatial considerations for slowing down a contagion.

In contemporary technological developed scenario, the distinctive manufacturing industry involves large number of diversified accomplishments such as administration office, design office, sales & marketing office, production or manufacturing shops, inspection and assembly departments, and security office etc., organized as a unit with essential communication amenities. The ultimate goal of facility plan or layout problem is to reduce the cost of material flow by locating the office and departments within specified location. In this paper, the layout of a casting industry has been designed by means of Computerized Relative Allocation of Facilities Technique (CRAFT). The results shows that a reduction of 34.9% in the total distance travelled could be achieved with the new layout design that was developed using CRAFT algorithm

The organizational success is depending on the employee engagement to their work to achieve organizational goals effectively. Physical environment and the design of the working place are the crucial factors determine the positive work engagement. However, in the present context, designing a workplace has become a somewhat difficult task due to owners, architects, and developers are constructing improper workplaces for any type of job due to a lack of information about appropriate office layout. Therefore, the convenient physical environment with appropriate layout is one of the most important factors that affect employee job engagement. Consequently, the study attempts to identify effects of workplace designs on employee job engagement in selected Public Commercial Banks in Colombo District, Sri Lanka. Sample selection of the study based on convenient sampling including 101 employees from Bank of Ceylon and Peoples Bank in Colombo. For the aim of data collection, a structured questionnaire survey was conducted on a sample of employees. The collected data were analyzed using IBM SPSS statistics using regression analysis. According to the study's findings, the use of various office layouts varies depending on the designation level of employees at a selected public commercial banks. Also, office layout, noise, quality of air, colors and privacy have positive significant impact to the job engagement of employees in public commercial banks. The study will assist property managers and human resource managers in determining employee perceptions and attitudes regarding their workplace, which will be important in developing strategies. Finally, through the convenient and attractive work place designing in future planning context, increase employees’ job engagement to achieve organizational goals effectively in Sri Lanka. Keywords: Employee Job Engagement, Physical Environment, Work Place Design

The organizational success is depending on the employee engagement to their work to achieve organizational goals effectively. Physical environment and the design of the working place are the crucial factors which determine the positive work engagement. However, in the present context, designing a workplace has become a somewhat difficult task due to owners, architects, and developers are constructing improper workplaces for any type of job due to lack of information about appropriate office layout. Therefore, the convenient physical environment with appropriate layout is one of the most important factors that affect employee job engagement. Consequently, the study attempts to identify effects of workplace designs on employee job engagement in selected public commercial banks in Colombo District, Sri Lanka. Sample selection of the study based on convenient sampling including 101 employees from Bank of Ceylon and Peoples Bank in Colombo. Structured questionnaire survey was conducted on a sample of employees to collect data. The collected data were analyzed using IBM SPSS statistics using regression analysis. According to the study's findings, the use of various office layouts varies depending on the designation level of employees in those selected public commercial bank. Also, office layout, noise, quality of air, colors and privacy have positive significant impact to the job engagement of employees in public commercial banks. The study will assist property managers and human resource managers in determining employee perceptions and attitudes regarding their workplace, which can be considered as a important aspect in developing strategies. Finally, the convenient and attractive work place designing in future planning context which help to increase employees' job engagement and to achieve organizational goals effectively in Sri Lanka. Keywords: Employee Job Engagement, Physical Environment, Work Place Design

Molten salt (MS) storage systems in the 565°C range can store green solar energy from thermal solar power station, such as the Crescent Dunes solar plant in Nevada. Large containers can be used to store energy and generate electricity for eight hours or more to be used at night or during peak demand hours, depending on the container size. Energy storage can reduce the fluctuation due to weather conditions experienced at thermal solar power stations because stable diurnal energy supply is made available by MS energy storage. Supported by the Office of Naval Research (ONR), the research presented discusses the considerations for designing molten salt storage tanks. An alternate molten salt storage cylindrical tank design layout is presented, including an improved roof design concept. A preliminary heat transfer analysis is presented and discussed for the alternate cylindrical tank design. This preliminary analysis was used to determine the thickness of insulating material in and around the cylindrical tank to reduce heat flux. These insulating materials include the use of firebrick and ceramic insulation to complement the structural carbon steel and the stainless steel that is used for corrosion resistance. This paper also introduces the alternate designs of a semi-buried spherical tank and drop shell tank that can be used storing molten salts.

Collaborative workspace businesses are now a trend in developing countries such as the Philippines. Coworking space is a business service provision model that lets individuals and teams work independently or collaboratively in a shared office space. In the Philippines, there is a big trend in starting a coworking space business. The millennial generation, which comprises the bulk of the metropolitan sector, is the main reason behind coworking space growth. Computer networking can contribute to the improvement of sales and customer retention and service of coworking space businesses. Implementing managed network services will reduce operational, maintenance, service, hardware, software, and infrastructure costs. Managed network services can enable the coworking space business to focus on its primary business goals In this paper, an ideal network design for collaborative workspace businesses was developed. The building floor layout is essential for the managed networks' design. It was determined that a two-story floor layout is ideal for the company and for implementing the proposed network design. Analysis of ideal network management was proposed in administration, operation, security, and maintenance. Detailed logical and physical network designs with ideal network equipment and technologies were created to improve the coworking space business's services by implementing managed networks.

It’s a cool autumn morning and I am grateful for the sun as it warms the wet concrete. I have been told we will be spending some time outside later, so I am hopeful it will remain sunny. When everyone arrives, we go directly to the principal’s office. Once inside, someone points at the PA system. People pull out their cameras and take a quick photo—we were told the PA system in each school can be different so information about the broadcasting mechanism could be helpful in an emergency. I decide to take a photo as well. Figure 1: PA system inside the principal's office (Photo by Michelle Stewart) The principal joins us and we begin the task of moving through the school: a principal, two plain clothes police officers, two uniformed police officers, two police volunteers and an anthropologist researcher. Our goal is to document the entire school for a police program called School Action For Emergencies (SAFE) that seeks to create emergency plans for each school on a national Canadian police database. It is a massive undertaking to collect the data necessary to create the interactive maps of each school. We were told that potential hiding spaces were one focus alongside the general layout of the school; the other focus is thinking about potential response routes and staging for emergency responders. We snap photos based on our morning training. Broom closets and cubbyholes are now potential hiding spots that must be documented with a photo and narrated with a strategy. Misplaced items present their own challenges. A large gym mattress stored under the stairs. The principal comments that the mattress needs to be returned to the gym; a volunteer crouches down and takes a picture in the event that it remains permanently and creates a potential hiding spot. Figure 2: Documenting gym mat in hallway/potential hiding spot (Photo by Michelle Stewart) We emerge from the school, take a photo of the door, and enter the schoolyard. We move along the fence line: some individuals take notes about the physical characteristics of the property, others jot down the height of the retaining wall, still others take photos of the neighboring properties. Everyone is taking notes, taking photos, or comparing notes and photos. Soon we will be back at the police station for the larger project of harmonizing all the data into a massive mapping database. Locating the State in Its Objects Focusing on a Canadian police program called School Action for Emergency (SAFE), this article discusses the material labour practices required to create a virtual object—an augmented map. This mapping program provides a venue through which to consider the ways augmented objects come into the world. In this article, I discuss the labour practices necessary to create this map and then illustrate how labour practices are erased as part of this production and consumption of an augmented technology meant to facilitate an effective emergency response. In so doing, I will also discuss the production of authority and expertise through deployment of these police aids. As someone concerned with the ways in which the state instantiates itself into the lives of its subjects, I look at the particular enrollment practices of citizen and state agents as part of statecraft (Stewart). From Weber we are told about the role of police as they relate to state power, “state is a human community that (successfully) claims the monopoly of the legitimate use of physical force within a given territory. Note that 'territory' is one of the characteristics of the state. Specifically, at the present time, the right to use physical force is ascribed to other institutions or to individuals only to the extent to which the state permits it” (Weber, 34 my emphasis). I would argue that part of this monopoly involves cultivating citizen consent; that the subordination of citizens is equally important to police power as is the state’s permission to act. One way citizen consent is cultivated is through the performance of expertise such that subjects agree to give police power because police appear to be experts. Seen this way, police aids can be critical in cultivating this type of consent through the appearance of police as experts when they appear all knowing; what is often forgotten are the workers and aids that support that appearance (think here of dispatchers and databases). Becoming SAFE The SAFE project is an initiative of the Royal Canadian Mounted Police (RCMP), the national police force in Canada. The goal of the program is to “certify” every school in the country, meaning each school will have documentation of the school that has been uploaded into the SAFE computer program. As illustrated in the introduction, this is a time-consuming process requiring not only photos and other data be collected but also all of this data and material be uploaded into the RCMP’s centralized computer program. The desired effect is that each school will have a SAFE program so police and dispatchers can access this massive collection of the data in the event of an emergency. During my time conducting research with the RCMP, I attended training sessions with John, a young corporal in the national police force. One of John’s duties was to coordinate the certification of the SAFE program that included training sessions. The program was initiated in 2007, and within one year, the province we were working in began the process of certifying approximately 850 of its 1700 schools; it had completed over 170 schools and identified 180 local SAFE coordinators. In that first year alone over 23,000 photos had been uploaded and 2,800 school layouts were available. In short, SAFE was a data heavy, labour-intensive process and one of John’s jobs was to visit police stations to get them started certifying local schools. Certification requires that at least one police officer be involved in the documentation of the school (photos and notes). After all the data is collected it must be articulated into the computer program through prompts that allow for photos and narratives to be uploaded. In the session described in the introduction, John worked with a group of local police and police auxiliaries (volunteers). The session started with a short Power Point presentation that included information about recent school tragedies, an audio clip from Columbine that detailed the final moments of a victim as she hid from killers, and then a practical, hands-on engagement with the computer software. Prior to leaving for on-site data collection, John had the trainees open the computer program to become familiar with the screens and prompts. He highlighted the program was user-friendly, and that any mistake made could be corrected. He focused on instilling interest before leaving for the school to collect data. During this on-site visit, as I trailed behind the participants, I was fascinated by one particularly diligent volunteer. He bent, climbed, and stretched to take photos and then made careful notations. Back at the police station he was just as committed to detail when he was paired up with his partner in front of the computer. They poured over their combined notes and photos; making routes and then correcting them; demanding different types of maps to compare their handwritten notes to the apparent errors in the computer map; demanding a street map for one further clarification of the proposed route. His commitment to the process, I started to think, was quite substantial. Because of his commitment, he had to engage in quite a bit of labour. But it was in this process of refining his data that I started to see the erasure of labour. I want to take some time now to discuss the process of erasure by turning attention to feminist and labour theory emerging from science and technology studies as means to articulate what was, and was not, taking place during the data entry. Maria Puig de la Bellacasa highlights the role of care as it relates to labour. In so doing, she joins a literature that draws attention to the ways in which labour is erased through specific social and material practices (see for example works in Gibson-Graham, Resnick and Wolf). More specifically, Puig de la Bellacasa investigates care in labour as it effects what she calls “knowledge politics” (85). In her work, Puig de la Bellaca discusses Suchman’s research on software design programs that produce virtual “office assistants” to assist the user. Suchman’s work reveals the ways in which this type of “assistant” must be visible enough to assist the user but not visible enough to require recognition. In so doing, Suchman illustrates how these programs replicate the office (and domestic servant) dynamics. Seen this way, labour becomes undervalued (think for example interns, assistants, etc.) and labour that is critical to many offices (and homes). Suchman’s work in this area is helpful when thinking about the role of augmented objects such as the augmented police map because in many ways it is a type of office assistant for police officers, handing over virtual notes and information about a location that police would otherwise not necessarily know thereby replicating the office dynamic of the boss that appears all knowing because, in part, s/he has a team that supports every aspect of their work. This devalued work (the lower paid intern or assistant) facilitates the authority—and ultimately the higher wage of the boss—who appears to earn this status. Let me layer this analysis of the “office assistant” with the similar phenomena in scientific knowledge production. Steven Shapin, a sociologist of science, discusses Robert Boyle’s 17th century laboratory and the various technicians in the background that assisted in experiments but remained ignored. Shapin argues contemporary scientific practice has changed little in this regard as technicians remain unaccounted for in the scientific record. He points out “science could not be made if this technician’s work were not done, but it is thought that anyone can do it” (Shapin, 557). Without these workers and their labour, scientific knowledge would not be possible, and yet they are ignored and their labour contribution erased (for example not included in formal discussion about the research, or more recently not included as authors in articles). Of course many technicians are/were paid, but nevertheless their role in the experiment erased. One figure emerged as the expert, the scientist, whose work appeared to be solely configured and created. Programs such as the SAFE project illustrate ways in which the police officer can emerge as an authority figure; but the authority rests on labour practices that move around in the background and go unacknowledged. Much like the lab, there are many ignored figures that produce the necessary objects of police work. In the case of the SAFE program, the ideal is that a police officer will respond to a call for service and with the click of a computer screen will be immersed in this augmented map. One click reveals data about the PA system, another click offers a full layout of the school, instructions about the design of the exits, notes about potential hiding spots inside, the list goes on. Each click is a product of labourer(s) that compiled the data. But these individuals, much like Boyle’s laboratory technicians, fade into the background and are erased as the police officer emerges as an authority. The map, an augmented object, may be credited with the data it holds, but the data collectors are long forgotten as the police officer stands alone as the subject of authority because of the smooth effects of the augmented map. Smooth Effects In an era of big data and data-intensive experiences, augmented objects are increasingly present in our daily lives—with expanded tolerance and appetite. When engaging an augmented object, there is a built-in expectation that the object will "work;" meaning it will run smoothly and effectively. Take Google Maps as an example: one expects the program will run on different scales, offer the capacity to map directions, and perhaps most importantly to be accurate. When these augmented objects run smoothly they appear to be a self-contained and organized object in and of themselves. This paper intervenes on these assumptions to illustrate that this “smooth effect” can serve to erase the labour necessary to produce the effect. Thinking here of the commodity fetish, one can recall Karl Marx’s intervention that illustrated how objects, commodities, permeate our social worlds in such ways that we can see the object—that we only see the object. This concept, commodity fetishism, argues that we erase the labour and social relations involved in the production of the objects, that we forget all that was required to create the object, and we don’t see all that was destroyed in its making. An example is to think of a cup of coffee. As you sip and consume it, do you think of the commodity chain? Do you think of the worker, the working conditions necessary to plant, harvest, roast and distribute the beans; do you think about the production of the bag the beans were transported in; do you think of the warehouse or coffeehouse from which the bag of beans came from? You more likely think about how it tastes—as an object in and of itself, how it is, rather than how it came into being in the world. Similarly, I want to think about this augmented map and how attention turns to it, not how it came into the world. Thinking about labour as it relates to computer programs and computer worlds, social scientists have investigated the necessary work of computer programmers and other labourers (see for example Kelty). Tiziana Terranova discusses the immaterial and affective labour that makes online communities thrive as individuals lend their labour (often unpaid) to create an online “world” that appears to organically come together—she argues these online communities are a product of free labour. Although the police are not working for “free” the volunteers are and the valorization of labour, if erased, still results in the similar outcome. Terranova is concerned about online communities that don’t simply come into being, but rather are the product of free labour. In the case of the SAFE program, labour practices are rendered invisible when augmented objects appear to be running smoothly —when in fact this appearance of smoothness necessarily requires labour and the commodity being exchanged is the claim to authority. Figure 3: Cross referencing hardcopy map (Photo by Michelle Stewart) Figure 4: Using a hand-drawn map to assist data entry (Photo by Michelle Stewart) Moving in a different direction, but still thinking about labour, I want to turn to the work of Chris Kortright. In his work about agricultural scientists, Kortright carefully details the physical practices associated with growing an experimental crop of sorghum. From the counting and washing of the seeds, to the planting and harvesting of the seeds, he delivers rich ethnographic stories from experimental fields and labs. He closes with the story of one researcher as she enters all the data into the computer to generate one powerpoint. He explains her frustration: “You can’t see all the time we spent. The nights we slept here. All the seeds and plants. The flooding and time at the greenhouse. All the people and the labour.” I nodded, these things had disappeared. In the table, only numbers existed. (Kortright, 20) Kortright argues for the need to recognize the social relations carved out in the field that are erased through the process of producing scientific knowledge—the young researcher ultimately knowing her labour did have a place on the slide.In much the same way, the police and volunteers engaged in a practice of removing themselves from the map. There was not enough space for long sentences explaining the debate about the best route to take; longer sentences were replace with short-phrased instructions. Conjuring the image of the police officer looking for fast, quick information, quick data was what they would deliver. The focus of the program was to place emergency icons (police cars, ambulance, fire engines and helicopters) onto the map, outline response routes, and offer photos as the evidence. Their role as individuals and their labour and creativity (itself a form of labour) was erased as the desired outcome was ease and access to data—a smooth effect. I was often told that many of the police cars don’t yet have a computer inside but in an idealized future world, police cars would be equipped with a computer console. In this world, officers could receive the call for service, access the program and start to move through layers of data rapidly while receiving the details of the call. This officer would arrive informed, and prepared to effectively respond to the emergency. Thinking back to labour required to create the SAFE map for each school (photographing, mapping, writing instructions, comparing details, etc.) and then the processes of hiding that labour (limited photos and short instructions) so that the program would appear to run smoothly and be user-friendly, the SAFE program, as an object, serves to abstract and erase labour. Indeed, the desired result was a smooth running program that operated much like Suchman’s office assistant who should be just visible enough to provide the needed help but otherwise remain invisible; similar in many ways to Shapin/Boyle’s scientific technician who is critical to knowledge production and yet remains formally unrecognized. Conclusion This article investigated a map as an entry point to understand the ways in which labour can be erased in augmented objects and, concurrently, how authority figures or experts instead emerge. My goal was to discuss the labour necessary to make one augmented map while also describing the process by which the labour necessary for the map was concurrently erased. Central to this article are the ways in which labour is erased as one clicks between these layers of data and, in the process, thinks the smoothly operating computer program is a measure of the strength of program itself, and not the labour required therein. By focusing on this augmented object, I am pointing out the collective labour needed to co-produce the map but how that map then helps to produce the police officer as authority figure. My intention is to look at the map as an unexpected entry point through which to understand how consent and authority is cultivated. Accordingly, I am concerned with the labour that is erased as this police figure emerges and authority is cultivated on the ground. I focus on the labour that necessarily to produce the police officer as expert because when that labour is erased we are left only with the authority figure that appears to be self-evident—not co-constructed. To understand state practices, as practices and not magical phenomena, we must look for the ways in which the state comes into being through particular practices, such as policing and to identify the necessary labour involvedReferencesGibson-Graham, J.K., Stephen Resnick, and Richard Wolff, eds. Re/Presenting Class: Essays in Postmodern Marxism. Durham: Duke University Press, 2000. Kelty, Chris. Two Bits: The Cultural Significance of Free Software. Durham: Duke University Press, 2008. Kortright, Chris. “On Labour and Creative Transformations in the Experimental Fields of the Philippines.” East Asian Science, Technology and Society: An International Journal 7.4 (2013). Marx, Karl. Capital: A Critique of Political Econony Vol. 1. New York: Penguin Books, 2004. Puig de la Bellacasa, Maria. “Matters of Care in Technoscience: Assembling Neglected Things.” Social Studies of Science 41.1 (2011): 85-106. Shapin, Stephen. “The Invisible Technician.” Scientific American 77 (1989): 554-563. Stewart, Michelle. “The Space between the Steps: Reckoning in an Era of Reconciliation.” Contemporary Justice Review 14.1 (2011): 43-63. Suchman, Lucy. Human-Machine Reconfigurations. New York: Cambridge University Press, 2007. Terranova, Tiziana. “Free Labour: Producing Culture for the Digital Economy.” Social Text 63 (2000): 33-58. Weber, Max. The Vocation Lectures: "Science as a Vocation", "Politics as a Vocation." Indianapolis: Hackett Publishing Company, 2004.

Abstract Background Infectious diseases physicians are leaders in assessing the health risks in a variety of community settings. An understudied area with substantial controversy is the safety of dental aerosols. Previous studies have used in vitro experimental designs and/or indirect measures to evaluate bacteria and viruses from dental surfaces. However, these findings may overestimate the occupational risks of dental aerosols. The purpose of this study was to directly measure dental aerosol composition to assess the health risks for dental healthcare personnel and patients. Methods We used a variety of aerosol instruments to capture and measure the bacterial, viral, and inorganic composition of aerosols during a variety of common dental procedures and in a variety of dental office layouts. Equipment was placed in close proximity to dentists during each procedure to best approximate the health risk hazards from the perspective of the DHCP. Devices used to capture aerosols were set at physiologic respiration rates. Oral suction devices were per the discretion of the dentist. Results We detected very few bacteria and no viruses in dental aerosols – regardless of office layout. The bacteria identified were most consistent with either environmental or oral microbiota, suggesting a low risk of transmission of viable pathogens from patients to DHCPs. When analyzing restorative procedures involving amalgam removal, we detected inorganic elements consistent with amalgam fillings. Conclusions Aerosols generating from dental procedures pose a low health risk for bacterial and likely viral pathogens when common aerosol mitigation interventions, such as suction devices, are employed.

The present study aimed to identify and describe the Professional Development Programmes available for Art Teachers in the Kwahu-South District Senior High Schools and to evaluate how authorities in the Kwahu-South District, organize Professional Development Programmes for Art teachers in the Senior High Schools. Qualitative and evaluation research designs were used. The population for the study consisted of 260 teachers at Kwahu-South District Senior High Schools. The population consisted of Heads of these schools, the Art and Culture Coordinator and the Human Resource Manager (HRM) at the Kwahu-South District education office. Out of the 260 population, only 32 were sampled for this study. Interviews, document analysis and focus group discussion were the instruments used in collecting the data. At the end of the study, it was realized that further studies, workshops, conferences and in-service training are the most common form of Professional Development Programmes that are available to teachers. The other Professional Development Programmes such as coaching, symposium, job rotation and seminar were the least and less attended programmes mentioned among the teachers. Therefore, it is recommended that the government and education stakeholders reconsider PD programmes in their action plans.

PurposeThe study assesses user satisfaction of workspaces modified at home in response to the COVID-19 pandemic, thereby analyzing the flexibility of modern homes in the twenty-first century in the United Arab Emirates.Design/methodology/approachData was collected using a structured online survey from 113 participants about their home office created to accommodate working/studying from home. Analysis of survey revealed the importance of type of residence in affecting satisfaction of functionality and well-being.FindingsThe collected demographic variables played a crucial role in affecting satisfaction with various elements, from indoor air quality of the working space to the amount of natural light received by the space. Finally, participants who felt the need to add color and change furniture layout, experienced feelings of productivity, commitment and motivation by working from home. The same participants decided to keep the amended changes to their living spaces, even after they return to working from their offices. The study concludes by presenting implications of this experience on future home designs; thereby offering suggestions of authorities, and designers to produce more flexible and resilient houses.Research limitations/implicationsA relatively small sample with limited professions was considered. Further research recommendations include increasing the sample size to target more categories of the residents of the UAE. Future research can expand the criteria used to evaluate satisfaction and include noise levels as well as accessibility.Practical implicationsThe study offers suggestions to authorities and designers to produce more flexible and resilient homes, taking demographics into consideration. Roof gardens, shading devices and privacy needs are crucial elements for the future home.Originality/valueThe research provides enough information to inform designers about the future of space interiors, how well they are configured, serviced and how adaptable they are, in order to enhance user satisfaction.HighlightsSatisfaction was affected by individual differences.Those who changed furniture layout showed least average satisfaction.Females reported higher satisfaction with indoor air quality and lighting than males.

IntroductionLinking healthcare expenditure data with health outputs and outcomes data is challenging. This is especially true in low-resource (LMIC) settings. Where such linking can be accomlished, however, it supports the development of IMPACT-per-DOLLAR metrics that may be leveraged to support programme optimization. Objectives and ApproachThis session will describe a new data-linking design for a global health programme targeted to low and middle-income countries (LMIC). The US Government's President's Emergency Plan for AIDS Relief (PEPFAR; www.pepfar.gov) is a \$7 billion/year programme spanning 58 LMICs. PEPFAR prepares annual budgets and plans. On a quarterly basis, Implementing Partners report programmatic district-level Monitoring, Evaluation and Reporting (MER) indicators to a central database. Starting in July, 2018, quarterly expenditure data will also be captured, broken down by major programme area and high level account code. The novel new data-linking approach triangulates the budget, indicator and expenditure datasets. ResultsThe PEPFAR programme is managed by the US State Department's Office of the Global AIDS Coordinator (S/GAC). S/GAC undertook, in 2017, a significant re-design of its information system requirements and the software systems that will support these. A multi-year design and prototyping effort has yielded a novel new approach for financial monitoring intended to improve S/GAC's abilities to exert its mandates regarding both programmatic and financial oversight. The new data-linking solutions are being implemented across all PEPFAR countries during the first half of 2018. Information model design choices (and trade-offs), solution architecture designs, and preliminary pilot results of this new implementation will be reported at the confernce. A discussion of implementation science lessons-learned specific to deploying in LMICs will also be presented. Conclusion/ImplicationsPEPFAR's goal and mission is to operationalize HIV epidemic control and achieve an AIDS-free generation by 2030. Data analytics are proving essential to achieving this goal. S/GAC's re-design efforts will help better link its huge financial and programmatic (MER) datasets to support DALY-per-DOLLAR impact optimization on this important initiative.

Delhi has always been a crucible of political disquiet, and the seat of manifold state and aesthetic desires to order, control and design the city. Even at this moment, we find ourselves before a ubiquitous impulse to change the appearance of the city through the Central Vista Project which proposes to cater to needs of increase in government office space. There are layers to the city and obvious enough, it is not monolithic. The vestiges and architectural remnants of subsequent ages narrate the relentless saga of power, domination and settlement. A historical analysis of the spatial structures reflects the reasons behind its physical organization. To talk about colonial designs within this very broad spectrum is but, only a brief moment in a longue duree of human settlement in this region. Yet, it is necessary to understand the spatial synchrony, for much of it is what we have inherited today and this is what shapes our experiences of this city even at present. Raghav Kishore’s The (Un)governable City (2020), makes an intervention in this corpus of historical analysis with his impeccable research and endless forays into the archives. This is a welcome addition to studies in the field of urban development of Delhi, with Pilar Maria Guerrieri’s Maps of Delhi (2017) being one precursor, which painstakingly curates maps of Delhi from the precolonial times, to the modern municipal Master Plans to contemporary digital mappings. Kishore unearths curious details from local sources and twines those with debates among colonial policy makers and personnel to highlight issues of political ideology, statecraft and governmentality. This volume juxtaposes notions of policing, control and accessibility with debates and discussions on sanitation, traffic, communication, railways and the building of military cantonments, which are significant if we think of the British rule in India as a garrison state, heavily dependent on the easy mobility of its military forces. The success of the control was conditional on the ability to gather up huge military forces to curb parallel sporadic outbursts at their very onset. The broadening of roads, regulation of quarters and delimiting encroachments and concerns over connectivity, were carefully thought out strategisations towards the goal of containment and territorialisation.

In the period up to the end of the Second World War, 21 women in the Netherlands completed an academic architectural course. Five of these women married a fellow architect and conducted a joint architectural practice with their husband. These practices profited from the post-war reconstruction boom and, in the 1950s and ’60s, from the growing demand for housing and utilitarian buildings. Jannie Kammer-Kret, Toki Lammers-Koeleman, Jeanne van Rood-van Rijswijk, Koos Pot-Keegstra and Lotte Stam-Beese contrived to flourish in their chosen profession, and all had successful careers. The collaborative model embraced by these couples, which allowed the female partners to develop their potential to the full, was surprisingly emancipated for the time. Although a home-based office, with its combination of business with household and children, held obvious appeal for the woman, the initiative for such arrangements sometimes came from the husband. There were several variations on the respectful and equitable collaborative model, ranging from one in which each partner worked independently on their own commissions to one in which the melding of individual contributions was such that it was no longer possible to attribute designs to one or the other partner. What these models demonstrate is that the women architects did not need to depend on the name and fame of their husband but were perfectly capable of shaping their own career. The work of these women architects was strongly influenced by Nieuwe Bouwen principles as reflected in the application of a functionalist and sober formal idiom, averse to superfluous decoration. Unsurprisingly, given the professional circles they both frequented, their partners held similar architectural views. This undoubtedly contributed to mutual inspiration and possibly also to two-way influence. The output of women architects is astonishingly varied. These women responded to the spirit of the times and to the sometimes difficult economic circumstances by employing new types of dwellings, building materials and techniques, designing buildings for new groups of residents or by familiarizing themselves with the latest requirements of industrial clients or government bodies. Their portfolios encompassed commissions for utilitarian buildings as well as for the more predictable houses. Their household experience and practicality proved particularly useful in the design of private homes, residential aged care and schools, finding expression in efficient floor plans, modern furnishings and new, easy to clean materials. This is also evident in the home-cum-practice they designed for themselves, where they were able to give free rein to those principles.