Relevant bibliographies by topics / Open-FOAM package

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'Open-FOAM package'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Open-FOAM package.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Open-FOAM package"

1

Soloveva, O. V., S. A. Solovev, Yu V. Vankov, I. G. Akhmetova, R. Z. Shakurova, and A. R. Talipova. "Determination of the effect of the open cell foam material geometry on the value of energy efficiency." Power engineering: research, equipment, technology 24, no. 3 (2022): 55–69. http://dx.doi.org/10.30724/1998-9903-2022-24-3-55-65.

Full text
Abstract:
THE PURPOSE. Improving the energy efficiency of open cell foam materials with different geometries (SC, BCC, FCC, DEM) and with different medium porosities (ε=0.7; ε=0.75; ε=0.8; ε=0.85; ε=0.9; ε=0.95) by numerical simulation. To determine the influence of the geometry and porosity of an open cell foam material on the values of pressure drop, heat flux and energy efficiency factor.METHODS .Numerical simulation was carried out using the ANSYS Fluent 19.2 software package. Geometric models of porous structures are sets of intersecting spheres with different packing structures: periodic Simple Cu
APA, Harvard, Vancouver, ISO, and other styles
2

Hmad, Ali A., and Nihad Dukhan. "Cooling Design for PEM Fuel-Cell Stacks Employing Air and Metal Foam: Simulation and Experiment." Energies 14, no. 9 (2021): 2687. http://dx.doi.org/10.3390/en14092687.

Full text
Abstract:
A new study investigating the cooling efficacy of air flow inside open-cell metal foam embedded in aluminum models of fuel-cell stacks is described. A model based on a commercial stack was simulated and tested experimentally. This stack has three proton exchange membrane (PEM) fuel cells, each having an active area of 100 cm2, with a total output power of 500 W. The state-of-the-art cooling of this stack employs water in serpentine flow channels. The new design of the current investigation replaces these channels with metal foam and replaces the actual fuel cells with aluminum plates. The cons
APA, Harvard, Vancouver, ISO, and other styles
3

Bolotnova, R. Kh, and E. F. Gainullina. "Investigation of axisymmetric wave flows under interaction of a spherical impact pulse with a barrier of aqueous foam." Proceedings of the Mavlyutov Institute of Mechanics 12, no. 2 (2017): 238–43. http://dx.doi.org/10.21662/uim2017.2.036.

Full text
Abstract:
The problem of spherical explosion in the gas region with a protective foam layer is solved in a two-dimensional axisymmetric formulation using a two-phase model of a gas-liquid mixture that includes the laws of conservation of mass, momentum and energy of the mixture and the equation for the dynamics of the volume content of phases. The numerical implementation of the model was carried out by modifying the standard solver of the compressibleMultiphaseInterFoam of the open package OpenFOAM. The results of computer modeling are visualized using the ParaView graphical platform.
APA, Harvard, Vancouver, ISO, and other styles
4

Jarrah, H. R., A. Zolfagharian, and M. Bodaghi. "Finite element modeling of shape memory polyurethane foams for treatment of cerebral aneurysms." Biomechanics and Modeling in Mechanobiology 21, no. 1 (2021): 383–99. http://dx.doi.org/10.1007/s10237-021-01540-7.

Full text
Abstract:
AbstractIn this paper, a thermo-mechanical analysis of shape memory polyurethane foams (SMPUFs) with aiding of a finite element model (FEM) for treating cerebral aneurysms (CAs) is introduced. Since the deformation of foam cells is extremely difficult to observe experimentally due to their small size, a structural cell-assembly model is established in this work via finite element modeling to examine all-level deformation details. Representative volume elements of random equilateral Kelvin open-cell microstructures are adopted for the cell foam. Also, a user-defined material subroutine (UMAT) i
APA, Harvard, Vancouver, ISO, and other styles
5

Kornievsky, A. S., and A. V. Nasedkin. "Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells." PNRPU Mechanics Bulletin, no. 3 (December 15, 2021): 70–83. http://dx.doi.org/10.15593/perm.mech/2021.3.07.

Full text
Abstract:
The paper studies effective elastic properties of foam or cellular materials modeled by a set of Gibson-Ashby open cells with regular or irregular structures. Currently, there are many papers that present results of studying cellular materials using theoretical, numerical and experimental methods. However, these papers consider either regular lattices, or a single cell, or representative volume models based not on the Gibson-Ashby models. In this paper, in addition to the regular lattice, irregular structures were numerically studied. A mathematical formulation of the homogenization problem ba
APA, Harvard, Vancouver, ISO, and other styles
6

Suksawang, Boonyanuch, Pisaisit Chaijareenont, and Patcharawan Silthampitag. "Effect of Unit Cell Design and Volume Fraction of 3D-Printed Lattice Structures on Compressive Response and Orthopedics Screw Pullout Strength." Materials 18, no. 6 (2025): 1349. https://doi.org/10.3390/ma18061349.

Full text
Abstract:
We aimed to evaluate the effects of unit cell design and the volume fraction of 3D-printed lattice structures with relative densities of 30% or 45% on compressive response and orthopedics screw pullout strength. All 3D lattice models were created using FLatt Pack software (version 3.31.0.0). The unit cell size of sheet-based triply periodic minimal surfaces (TPMSs)—Gyroid and Schwarz Diamond—was 5.08 mm, whereas that of skeletal TPMS—Skeletal Gyroid, Skeletal Schwarz Diamond, and Skeletal Schoen I-Wrapped Package—was scaled down to 3.175 and 2.54 mm. Two photopolymer resin types—Rigid 10k and
APA, Harvard, Vancouver, ISO, and other styles
7

Haponova, Lyudmila, Alexander Arkhipov, and Andrii Suminov. "Computer modeling of anisotropic shells in PC «AUTODESK INVENTOR»." Bulletin of Kharkov National Automobile and Highway University, no. 108 (May 16, 2025): 218. https://doi.org/10.30977/bul.2219-5548.2025.108.0.218.

Full text
Abstract:
Abstract. A numerical experiment was conducted to investigate the behaviour of structurally anisotropic structures under the influence of a uniformly distributed load and a concentrated load of 1 t/m2. To study the stress-strain state of the elements, a safe space was proposed in the form of a structurally anisotropic shell measuring 9 m x 9 m with a concrete ribs pitch of 1 m with polystyrene foam inserts and a structurally anisotropic shell measuring 9 m x 9 m with a metal sheet in the lower belt. Goal. The goal is to create a scientifically based calculation of structurally anisotropic stru
APA, Harvard, Vancouver, ISO, and other styles
8

Arthur, Jane F., Isaac Pinar, Adam Facey, et al. "Medicine Meets Mathematics: Measuring ADAM10 Activity Directly On a Forming Thrombus." Blood 122, no. 21 (2013): 196. http://dx.doi.org/10.1182/blood.v122.21.196.196.

Full text
Abstract:
Abstract Platelets respond rapidly to injury, infection and changes in blood shear stress where they engage subendothelial collagen and von Willebrand Factor via platelet-specific receptors glycoprotein (GP)VI and the GPIb-IX-V complex, respectively. Metalloproteolytic shedding of GPVI is one important consequence of platelet activation and occurs via activation of the receptor sheddase A Disintegrin and Metalloproteinase (ADAM)10. We demonstrated that exposure of platelets to brief, elevated shear was sufficient to activate ADAM10-mediated shedding of GPVI and that this activation did not req
APA, Harvard, Vancouver, ISO, and other styles
9

Araujo, Gediendson Ribeiro de, Thyara de Deco-Souza, Letícia Coelho Ferreira Bergo, et al. "Field friendly method for wild feline semen cryopreservation." Journal of Threatened Taxa 12, no. 5 (2020): 15557–64. http://dx.doi.org/10.11609/jott.5744.12.5.15557-15564.

Full text
Abstract:
The aim of this study was to develop a field-friendly method for free-living jaguar and cougar semen cryopreservation. Six captive Jaguars Panthera onca and three captive Cougars Puma concolor were chemically restrained with a combination of medetomidine (0.08–0.1 mg/kg) and ketamine (5 mg/kg). Semen was collected through a tomcat urinary catheter with an open end, diluted for a final concentration of 50 x 106 sperm/mL in a TRIS-egg yolk extender and packaged into 0.25 mL straws. We compared two cooling methods: CoolA - in which straws were placed in a glass tube that was placed in a glass bot
APA, Harvard, Vancouver, ISO, and other styles
10

Bowman, Carley, Aleena Jose, and Martin G. Rosario. "Does Dual Motor Tasks Provokes Posture Adaptations in Healthy Young Adults? A Cross-sectional Study." JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH, 2021. http://dx.doi.org/10.7860/jcdr/2021/49048.15374.

Full text
Abstract:
Introduction: Most studies on postural deviations during single and dual tasks have been extensively studied in neuromuscular and older adult populations. Nevertheless, further research is warranted to identify whether such tasks can impose postural adaptations in young, healthy adults without sensory impairments. Aim: To assess postural stability modifications in young adults during single tasks and dual motor tasks (holding a cup filled with water) while concomitantly challenging the sensory systems. Materials and Methods: This was the cross-sectional study on 82 young adults (18-45 years ol
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Open-FOAM package"

1

Медведева, Л. В., та И. А. Панкратов. "Моделирование течений мелкой воды средствами пакета Open-FOAM". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65558.

Full text
Abstract:
В работе рассмотрена математическая модель движения жидкости, полученная путём применения усреднённых по вертикали характеристик (так называемых уравнений мелкой воды). Настоящая работа посвящена численному исследованию нестационарных уравнений мелкой воды.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Open-FOAM package"

1

Dukhan, Nihad, AHMED S. SULEIMAN, and MUNTADHER A. AL-RAMMAHI. "SIMULATION AND VALIDATION OF METAL-FOAM COOLING DESIGN." In 2024 NDIA Michigan Chapter Ground Vehicle Systems Engineering and Technology Symposium. National Defense Industrial Association, 2024. http://dx.doi.org/10.4271/2024-01-3425.

Full text
Abstract:
<title>ABSTRACT</title> <p>The open-cell metal foams have an internal structure is a web of connected ligaments. Foams are made from pure or alloys of aluminum, nickel, steel, magnesium, titanium and copper. In addition to being light weight, the foams exhibit excellent stiffness-to-weight ratios. Some foams can be resilient materials in harsh environments and have high impact resistance. The foams have high conductivities and large surface area per unit volume. All of these attributes make metal foam an attractive core for heat exchange. For example, cooling of power electro
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Zhaobin, Benjamin Bouscasse, Lionel Gentaz, Guillaume Ducrozet, and Pierre Ferrant. "Progress in Coupling Potential Wave Models and Two-Phase Solvers With the SWENSE Methodology." In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-77466.

Full text
Abstract:
This paper presents the recent developments of the Spectral Wave Explicit Navier-Stokes Equations (SWENSE) method to extend its range of application to two-phase VOF solvers. The SWENSE method solves the wave-structure interaction problem by coupling potential theory and the Navier-Stokes (NS) equations. It evaluates the incident wave solution by wave models based on potential theory in the entire computational domain, leaving only the perturbation caused by the structure and the influence of the viscosity to be solved with CFD. The method was proven in previous studies to be accurate and effi
APA, Harvard, Vancouver, ISO, and other styles
3

Dukhan, Nihad, and Pable D. Quinones. "Simulations of Metal Foam Cooling of High-Power Electronics Using the Equivalent Thermal Conductivity." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42609.

Full text
Abstract:
A one-dimensional heat transfer model for open-cell metal foam is presented. The model includes both the conduction and the convection in the ligaments and in the pores of the foam. It uses the typical foam parameters provided by the manufacturers. Three aluminum foams having different relative surface areas, relative densities, ligament diameters, and number of pores per inch are analyzed and an effective thermal conductivity is determined. The heat transfer increases with the number of pores per inch. The resulting improvement in heat transfer can be as high as 57 percent over solid aluminum
APA, Harvard, Vancouver, ISO, and other styles
4

Klein, John, George Gilchrist, Jim Karanik, et al. "Thermal Management of Airbourne Early Warning and Electronic Warfare Systems Using Foam Metal Fins." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35187.

Full text
Abstract:
This program, addresses the need for thermal management of increasingly powerful and densely packaged electronic devices. Open-celled foams and lattice structures offer the promise of much improved heat transfer between the coolant and the solid structure of the lattice compared to traditional finned heat exchangers. The focus of this program is to evaluate integration of foam and lattice materials as heat exchanger cores and as electronic racks. The potential benefits of this approach include reduction in the volume and weight of the heat exchanger core and/or device junction temperature as w
APA, Harvard, Vancouver, ISO, and other styles
5

Ariyaratna, Thenuka M., Nihal U. Obeyesekere, Tharindu S. Jayaneththi, and Jonathan J. Wylde. "Inhibiting Calcium Chloride Heavy Brines to be Used as Drilling Fluids: Hurdles Encountered in Treatment, Application, Corrosion Mitigation, Solubility, and Foaming Tendencies for Drilling Sites in Canada." In SPE International Conference on Oilfield Chemistry. SPE, 2021. http://dx.doi.org/10.2118/204337-ms.

Full text
Abstract:
Abstract A need for more economic drilling fluids has been addressed by repurposing heavy brines typically used as completion fluids. Heavy brine corrosion inhibitors have been designed for stagnant systems. Drilling fluids are subjected to both heavy agitation and aeration through recirculation systems and atmospheric exposure during the various stages of the drilling process. This paper documents the development of heavy brine corrosion inhibitors to meet these additional drilling fluid requirements. Multiple system scenarios were presented requiring a methodical evaluation of corrosion inhi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography