Relevant bibliographies by topics / Operation HONKER

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Operation HONKER'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Operation HONKER.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Operation HONKER"

1

Pawlus, P. "A Study of the Dependence of the Functional Properties of the Cylinder Liner Surface Layer on the Operating Conditions." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 210, no. 1 (March 1996): 17–27. http://dx.doi.org/10.1243/pime_proc_1996_210_474_02.

Full text
Abstract:
The paper presents results of the measurements of the surface roughness and physical properties of the outer layer of honed cylinders. The results of wear measurement of the cylinders and piston rings mating with them during running-in and during automotive engine operation under artificially increased dustiness conditions are presented and analysed. Interdependences among the state of the cylinder liner outer layer and operating parameters of the engines after running-in are also analysed. Additionally, the honed cylinder liners were used as specimens in wear resistance tests performed in the presence of lubricating oil with some amount of grinding particles. The results of the measurements of specimen and counter-specimen wear, as well as friction force and temperature at the friction surfaces during the test, are also presented and analysed. It was found that abrasive wear resistance of the honed cylinder liner depends on the operating conditions. During engine operation under increased dustiness conditions cylinder wear intensity depends mainly on the initial surface topography. Under conditions of low relative speed, low temperature and constant load, cylinder wear resistance in the case of large wear values depends on physical properties of the surface layer. However, when the amount of wear is smaller than the initial surface height, cylinder wear intensity in two studied cases depends mainly on its surface topography.
APA, Harvard, Vancouver, ISO, and other styles
2

Sommaruga, Cornelio. "Humanitarian action and peace-keeping operations." International Review of the Red Cross 37, no. 317 (April 1997): 178–86. http://dx.doi.org/10.1017/s0020860400085107.

Full text
Abstract:
It is an honour and a privilege for me to address this Conference devoted to a topic of great importance to the International Committee of the Red Cross (ICRC). As a humanitarian organization, whose mandate it is to provide protection and assistance for victims of armed conflicts and which is operational worldwide, the ICRC has been directly concerned with many peace-keeping missions undertaken by the United Nations.
APA, Harvard, Vancouver, ISO, and other styles
3

DONAGAN, BARBARA. "THE WEB OF HONOUR: SOLDIERS, CHRISTIANS, AND GENTLEMEN IN THE ENGLISH CIVIL WAR." Historical Journal 44, no. 2 (June 2001): 365–89. http://dx.doi.org/10.1017/s0018246x01001807.

Full text
Abstract:
Contrary to stereotypes that represent it primarily as an expression of machismo or romantic chivalry, military honour in early modern England was professional, moral, utilitarian, and a force for social stability. It was pragmatic as well as idealistic. It shared attributes of civilian honour but also comprehended rules and obligations specific to soldiers. Professional honour required that the soldier should know and observe the codes and practices of his métier. To do so satisfied his internal sense of personal integrity and brought external reputation. Honour also had a broader social value. Mutuality and utility marked its operation in the English civil war. This mutuality safeguarded practices both sides found useful, such as prisoner exchanges, for the honour of each side was engaged in observance of the relevant rules. The survival of a bipartisan soldiers' honour ameliorated relations between enemies. It helped to prevent irrevocable social divisions, to sustain social order, and to enable previously warring Englishmen to live together with tolerable equanimity.
APA, Harvard, Vancouver, ISO, and other styles
4

Davoudinejad, Ali, M. Y. Noordin, Danial Ghodsiyeh, Sina Alizadeh Ashrafi, and Mohsen Marani Barzani. "Effect of Tool Wear on Tool Life and Surface Finish when Machining DF-3 Hardened Tool Steel." Applied Mechanics and Materials 315 (April 2013): 241–45. http://dx.doi.org/10.4028/www.scientific.net/amm.315.241.

Full text
Abstract:
Hard turning is a dominant machining operation performed on hardened materials using single-point cutting tools. In recent years, hard turning operation has become more and more capable with respect to various machinability criteria. This work deals with machinability of hardened DF-3 tool steel with 55 ±1 HRC hardness at various cutting conditions in terms of tool life, tool wear mechanism and surface roughness. Continuous dry turning tests were carried out using coated, mixed ceramic insert with honed edge geometry. Two different cutting speeds, 100 and 210 m/min, and feed rate values of 0.05, 0.125 and 0.2 mm/rev were used with a 0.2 mm constant depth of cut for all tests. Additionally scanning electron microscope (SEM) was employed to clarify the different types of wear. As far as tool life was concerned, best result was achieved at lowest cutting condition whereas surface roughness values decreased when operating at higher cutting speed and lower feed rate. Additionally maximum volume of material removed is obtained at low cutting speed and high feed rate. Dominant wear mechanism observed during the experiments were flank and crater wear which is mainly caused by abrasive action of the hard workpiece material with the ceramic cutting tools.
APA, Harvard, Vancouver, ISO, and other styles
5

Adler, Paul, and Todd Tucker. "Operation Monkey Wrench: Toward a Populist Policy Process?" Populism 2, no. 2 (October 14, 2019): 137–56. http://dx.doi.org/10.1163/25888072-02021029.

Full text
Abstract:
Abstract The policy process literature focuses on technocratic insiders, while scholarship on populism hones in on demagogic outsiders. The latter’s distrust of elites, compromise, and nuance makes them potentially effective in opposition or government, but less obviously as intervenors in policy formation between elections. We argue that, under certain conditions, populists can effectively insert themselves into policy processes without seizing power or even reducing the basic polarity they believe exists between “the elite” and “the people.” In particular, populists can “monkey wrench” the policy process by getting maligned elites to act against their own interests, even if the populists themselves can agree on no alternative policies. Using original archival materials, we illustrate how the transnational movement against the Multilateral Agreement on Investment in the late 1990s deployed monkey-wrenching. In so doing, we contribute to an understanding of how Benjamin Moffitt’s conception of the populist style can be deployed to analyze left-wing transnational nongovernmental policy entrepreneurs, instead of the right-wing national government aspirants who are often focused upon in political science research on populism. We conclude that interdisciplinary scholarship between political scientists and historians can identify circumstances when populists’ influence on policy is more likely.
APA, Harvard, Vancouver, ISO, and other styles
6

Ciechanowski, Grzegorz. "Fighting vehicles in Polish military contingents in Syria and Former Yugoslavia in the years 1992-2016." Scientific Journal of the Military University of Land Forces 193, no. 3 (September 16, 2019): 397–416. http://dx.doi.org/10.5604/01.3001.0013.4999.

Full text
Abstract:
The article presents the analysis of the use of military vehicles in Polish military contingents fulfilling their mandated tasks in the Middle East and Former Yugoslavia. It encompasses the nature of operations con-ducted in these places and the resulting role of the vehicles used there. It also describes the history of their making and development, basic technical data and opinions about their use during the said tasks. The analysis comprised the following vehicles: Finnish Sisu XA-180, which is the prototype of KTO Rosomak and RG-31 Nyala vehicles originating from the Republic of South Africa and used by Polish military forces in the UNDOF mission. The group of machines which were part of the equipment used by contingents in missions in Former Yugoslavia is rep-resented by: Honker Tarpan off-road vehicle, AMZ Dzik 2 armoured vehicle, BRDM-2 reconnaissance patrol vehicle and BWP-1 infantry fighting vehicle.
APA, Harvard, Vancouver, ISO, and other styles
7

Huysmans, Jef. "Shape-shifting NATO: humanitarian action and the Kosovo refugee crisis." Review of International Studies 28, no. 3 (July 2002): 599–618. http://dx.doi.org/10.1017/s0260210502005995.

Full text
Abstract:
The article deals with NATO's intervention in Kosovo. Instead of focusing on the military and diplomatic interventions, the article looks at how NATO developed a humanitarian interest in providing assistance and protection to the Kosovo Albanian refugees. In the name of the refugees—and to a lesser extent, of internally displaced persons—NATO entered a humanitarian field and was partly transfigured into a humanitarian agency during the crisis in Kosovo. The political significance of NATO's humanitarianism was that its reputation for competence and its image of respectability and honour depended to an extent on how well it supported the international assistance to the Kosovo Albanians. The stakes were not limited to the immediate Kosovo context, however. The symbolic struggle for reputation and honour resonated directly in the political struggle for the conservation and transformation of the European security complex. The success of the humanitarian operation became an additional element of demonstrating the value of military capital for acquiring political authority in the definition and management of security problems in post-Cold War Europe.
APA, Harvard, Vancouver, ISO, and other styles
8

Haridas, R. P., and J. D. Paull. "St John'S Hospital (Morton House), Launceston, Australia: A History of the Hospital and Dr William Russ Pugh'S First Operations under Ether." Anaesthesia and Intensive Care 45, no. 1_suppl (July 2017): 29–36. http://dx.doi.org/10.1177/0310057x170450s105.

Full text
Abstract:
On 7 June 1847, William Russ Pugh, MD, performed two operations at the St John's Hospital and Self-Supporting Dispensary, Launceston, Tasmania, while his patients were rendered insensible by the inhalation of sulphuric ether. These operations are the earliest documented surgical operations under ether in Australia. St John's Hospital officially opened on 1 September 1845. The hospital may have closed in late 1853 because of financial difficulties. The two-storey Georgian-style building which served as the hospital was completed c1831–1832. It has served as a residence, school, boarding school, hospital, medical consulting rooms and commercial offices. The building is now known as Morton House. We could not identify the date when the name Morton House was adopted, or explain the origin of the name. The earliest identified use of this name is in May 1873 in a newspaper advertisement for boarders. No person with the surname Morton is known to have been associated with the building as an owner or as a tenant. The name Morton House may honour William T.G. Morton, MD, the Boston dentist who performed the first public demonstration of surgical etherisation on 16 October 1846.
APA, Harvard, Vancouver, ISO, and other styles
9

Chiasson, Basil. "Simon Stephens, Birdland, and a Few Affects of Neoliberalization." Journal of Contemporary Drama in English 6, no. 2 (November 7, 2018): 331–57. http://dx.doi.org/10.1515/jcde-2018-0029.

Full text
Abstract:
Abstract This article explores the ways theatre might inspire a critique of what is arguably most pressing about contemporary neoliberalization—its operation at the level of subjectivity to reform society. The focus in this is Simon Stephens and his play Birdland (2014). Working from extant scholarship that connects Stephens’s work to neoliberalism, the article locates the playwright and his work in relation to a specific history of neoliberalization in Britain and argues that Birdland is a timely political drama because it hones in on certain features and affects of neoliberalization, doing so in ways that open a space for engaging critically with key problems engendered by contemporary capitalism.
APA, Harvard, Vancouver, ISO, and other styles
10

Inocentes, Eugenio M. "THE EARLY HISTORY OF HAND SURGERY IN THE PHILIPPINES AND HIGHLIGHTS IN MY EXPERIENCE AT THE NATIONAL ORTHOPAEDIC HOSPITAL MANDALUYONG AND THE OUR LADY OF LOURDES HOSPITAL, MANILA." Hand Surgery 11, no. 03 (January 2006): 109–33. http://dx.doi.org/10.1142/s0218810406003231.

Full text
Abstract:
Several years ago, while attending a Philippines Orthopaedic Association (PDA) Annual Convention, held at the Westin Philippine Plaza Hotel, Manila in December, I had the opportunity to meet with Professor Yoshikazu Ikuta, a well-known microsurgery and hand surgeon from Japan and one of the foreign guest speakers. I had been invited to work with him at the Armed Forces of the Philippines (AFP) Medical Center on the case of a high ranking general of the AFP, with a hand contracture disability problem. The case was referred to him by Dr. Evaristo Sanchez, Chief of Orthopaedics and the Commanding General of the AFP Medical Center. He had been pre-scheduled for surgery the next day, a Sunday morning, the day before Prof. Ikuta was due to return to Japan. After a brief examination and evaluation of the generals affected hand, in the operating room with Prof. Ikuta, just before he was placed under general anaesthesia, we performed the operation together. The operation did not involve microsurgery. The procedures done were multiple combined Bunnell-Zancolli pulley advancements and MP-joint volar capsulorraphies plus flexor tendon releases in the volar forearm, which although quite extensive, were only palliative, to minimise and improve on the contracture deformities, in preparation for a final re-evaluation for possible later, more definitive tendon transfers for hand function. However, I never received any further information regarding the results of our surgery. Recently, I have been honoured and invited again by Prof. Ikuta, presently the Editor-in-Chief of the Hand Surgery Journal (Asian Volume), this time to write the history of hand surgery in the Philippines and add to it, "Highlights in my experience at the National Orthopaedic Hospital, Mandaluyong, and the Our Lady of Lourdes Hospital, Manila", the last portion of which is on paralytic disabilities of the Hand. I am deeply grateful to Prof. Ikuta for giving me this honour and opportunity to present the total experience, favourable and unfavourable, of a hand surgeon from a developing country, like the Philippines. Furthermore, this would afford me also, the chance to be able to make known to readers of this now prestigious journal, the philosophical thoughts which led me to unwittingly originate or come up with and develop a few of my own "Long Tendon Rerouting Procedures" which may possibly and hopefully merit as this author's title contribution to surgery of the hands.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Operation HONKER"

1

Seefeldt, Connor. "'Factum ex scientia': I Canadian Corps Intelligence during the Liri Valley Campaign, May – June 1944." Thèse, Université d'Ottawa / University of Ottawa, 2012. http://hdl.handle.net/10393/23327.

Full text
Abstract:
Studies on Canadian Army military intelligence remain sparse in Canadian military historiography. This study is unique in that it focuses on the development, doctrine, and influence of intelligence within the I Canadian Corps throughout the Liri Valley battles during the Italian Campaign. It will be argued that I Canadian Corps intelligence achieved notable overall success in helping to break the Hitler Line by providing comprehensive and relatively up-to-date information on enemy dispositions and strengths which helped commanders and staff planners properly prepare for the operation. This success was attributable to three main factors: excellent intelligence personnel selection and training; the successful mentorship of I Canadian Corps intelligence by Eighth Army's intelligence cadre; and the overall effectiveness of 1st Canadian Infantry Division's intelligence organization which had been in the Mediterranean theatre since July 1943. Notwithstanding these successes, a number of faults within the Canadian Corps intelligence system must also be explained, including the poor performance of 5th Canadian Armoured Division's intelligence organization during the pursuit up the Liri–Sacco Valleys, and the mediocre execution of Corps counter-battery and counter-mortar operations. This study will demonstrate how an effective intelligence organization must augment existing army doctrine and how it can mitigate, though not completely eliminate, battlefield uncertainty. Further, it will also demonstrate that a comprehensive lessons-learned process must be undertaken to continually refine existing intelligence doctrine and procedures, with frequent training programs inculcating personnel in this doctrine. Taken as a whole, this study is unique as it is one of only several studies devoted solely to developing a greater understanding of a little-understood, and often forgotten, staff function within the Canadian Army during the Second World War.
APA, Harvard, Vancouver, ISO, and other styles
2

Joeckel, George Louis. "An Evaluation of Compatibility, Effectiveness, Utility, and Implementation of Plagiarism-Detection Software Operating in the Honor Code Environment at Brigham Young University." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd2193.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Operation HONKER"

1

Honger: Een geschiedenis van de Eerste Wereldoorlog. [Tielt, Belgium]: Lannoo, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blom, Rick. Honger: Een geschiedenis van de Eerste Wereldoorlog. [Tielt, Belgium]: Lannoo, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bravo, Hugo Crombet. La expedición del Honor: Expedición Crombet-Maceo Duaba, Baracoa 1. de abril de 1895. Santiago de Cuba: Editorial Oriente, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bravo, Hugo Crombet. La expedición del Honor. La Habana: Editorial de Ciencias Sociales, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gary, Williams. SEAL of honor: Operation Red Wings and the life of Lt. Michael P. Murphy, USN. Annapolis, Md: Naval Institute Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

SEAL of honor: Operation Red Wings and the life of Lt. Michael P. Murphy, USN. Annapolis, Md: Naval Institute Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gamble, Bruce. Fortress Rabaul: The battle for the Southwest Pacific, January 1942-April 1943. Minneapolis: MBI Pub. Co. and Zenith Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fortress Rabaul: The battle for the Southwest Pacific, January 1942-April 1943. Minneapolis: Zenith Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Emering, Edward J. The campaign decorations and medals of the Persian Gulf War (1990 to 1991). [Chicago: E.J. Emering], 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yenne, Bill. The heroic saga of the two top-scoring American aces of World War II. New York: Berkley Caliber, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Operation HONKER"

1

Angerpointner, Thomas A. "Dedication: In Honor of Professor Waldemar Christian Hecker." In Operative Technique in Neonates and Infants, 1–3. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-87707-0_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Leonetti, Francesca. "Angiola D’Orso ante lo cómico calderoniano: Amore, honore e potere." In Studi e saggi, 251–66. Florence: Firenze University Press, 2020. http://dx.doi.org/10.36253/978-88-5518-150-1.16.

Full text
Abstract:
This contribution aims to offer a study of the Italian adaptation of the Calderonian comedy Amor honor y poder by Angiola D'Orsi, in which the mechanisms that have allowed the recreation of the semantics of comedy, complex and strongly rooted in the stereotyped formulas of every literary tradition, are highlighted. Art comedian, dramatist, translator and highly experienced actor-manager (capocomico), Angiola D'Orsi shows her ability to acclimate the Spanish opera to the new context of reception, through an operation of mediation and interpretation of the two ideological and dramatic systems. Through the comparative analysis of the figures carrying comedy, characterized by linguistic and character stereotypes, we examine the ways in which their dramatic and cultural redefinition is carried out, closely linked to Italian theatrical practice and in accordance with the traditional mask of Zanni.
APA, Harvard, Vancouver, ISO, and other styles
3

Keil, Mark, Shimon Machluf, Yair Margalit, Zhifan Zhou, Omer Amit, Or Dobkowski, Yonathan Japha, et al. "Stern-Gerlach Interferometry with the Atom Chip." In Molecular Beams in Physics and Chemistry, 263–301. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63963-1_14.

Full text
Abstract:
AbstractIn this invited review in honor of 100 years since the Stern-Gerlach (SG) experiments, we describe a decade of SG interferometry on the atom chip. The SG effect has been a paradigm of quantum mechanics throughout the last century, but there has been surprisingly little evidence that the original scheme, with freely propagating atoms exposed to gradients from macroscopic magnets, is a fully coherent quantum process. Specifically, no full-loop SG interferometer (SGI) has been realized with the scheme as envisioned decades ago. Furthermore, several theoretical studies have explained why it is a formidable challenge. Here we provide a review of our SG experiments over the last decade. We describe several novel configurations such as that giving rise to the first SG spatial interference fringes, and the first full-loop SGI realization. These devices are based on highly accurate magnetic fields, originating from an atom chip, that ensure coherent operation within strict constraints described by previous theoretical analyses. Achieving this high level of control over magnetic gradients is expected to facilitate technological applications such as probing of surfaces and currents, as well as metrology. Fundamental applications include the probing of the foundations of quantum theory, gravity, and the interface of quantum mechanics and gravity. We end with an outlook describing possible future experiments.
APA, Harvard, Vancouver, ISO, and other styles
4

Malovany, Pesach, Amatzia Baram, Kevin M. Woods, and Ronna Englesberg. "The Liberation Operations in the Southern Sector." In Wars of Modern Babylon. University Press of Kentucky, 2017. http://dx.doi.org/10.5810/kentucky/9780813169439.003.0024.

Full text
Abstract:
This chapter deals with the following Iraqi liberation operations, called Tawakalna operations, in the southern sector, one in the Shalamja area, and the other in the Majnun Islands area. It describes the battlefield, the Iranian forces and their deployment, the planning and preparations by the Iraqis for those operations, and the course of the operations themselves. The chapter deals also with an operation carried out by the Iranian opposition forces, the Mujahidin Khalk, to “liberate” the town of Mehran un the central sector. In those victory operations the Iraqi Army restored its honor and demonstrated its new capabilities that had been significantly improved, compared to those of the earlier war years. They also sought to destroy once and for all the Iranian war machine, including the army and the Revolutionary Guards.
APA, Harvard, Vancouver, ISO, and other styles
5

Lake, Peter. "The politics of honour (in a popular state)." In How Shakespeare Put Politics on the Stage. Yale University Press, 2017. http://dx.doi.org/10.12987/yale/9780300222715.003.0019.

Full text
Abstract:
This chapter examines the politics of honour. ‘Honour’ is at least as ubiquitous in Julius Caesar as it is in the Henry plays, but the notions of honour to be found in the Roman play are very different from those in the Henriad. Set in a monarchy, the honour on display in the Henry plays is recognisably ‘chivalric’ and military, obsessed with noble lineage and monarchical right, while precisely because Caesar is set in a republic, the honour code in operation there is just as overtly ‘republican’ and ‘civic’. Ultimately, ‘honour’ features equally prominently both on the monarchical, Caesarean and on the conspiratorial and republican sides of the equation.
APA, Harvard, Vancouver, ISO, and other styles
6

Corn, Gary P., and Peter P. Pascucci. "The Law of Armed Conflict Implications of Covered or Concealed Cyber Operations." In The Impact of Emerging Technologies on the Law of Armed Conflict, 273–306. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190915322.003.0010.

Full text
Abstract:
This chapter addresses the complex Law of War issues of distinction as applied to cyber operations. Cyberspace is now widely recognized as an operational domain of conflict and states are adopting cyber capabilities and operational constructs as means and methods of warfare at an increasing rate. Owing to the nature of this new and unique domain, operations security is at a premium. The use of cover and concealment and, at some level, the deception inherent thereto directly implicates in novel ways the traditional LOAC rules designed to ensure respect for the principle of honor in the conduct of hostilities and to protect civilians and civilian objects from the dangers of war. These rules must be interpreted in light of the unique aspects of cyberspace and the distinctive challenges it poses. A better understanding of how the cardinal principle of distinction and the LOAC rules meant to implement it awaits elucidation through state practice and opinion. In the meantime, thoughtful discussion and detailed analysis of the issues of perfidy, ruses, and the passive precautions rule are necessary to ensure that the spirit and intent of the LOAC are properly balanced against military necessity.
APA, Harvard, Vancouver, ISO, and other styles
7

Sodhi, Navdeep S. "Prepare your Pricing Operations for Change." In Visionary Pricing: Reflections and Advances in Honor of Dan Nimer, 335–55. Emerald Group Publishing Limited, 2012. http://dx.doi.org/10.1108/s1069-0964(2012)0000019020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Malamud Feinsilber, Marina. "Latin America in peacekeeping operations: a sociopolitical overview." In Advances in Military Sociology: Essays in Honor of Charles C. Moskos, 139–55. Emerald Group Publishing Limited, 2009. http://dx.doi.org/10.1108/s1572-8323(2009)000012a013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nagle, Thomas, and Lisa Thompson. "Integrating Marketing and Operational Choices for Profit Growth." In Visionary Pricing: Reflections and Advances in Honor of Dan Nimer, 47–60. Emerald Group Publishing Limited, 2012. http://dx.doi.org/10.1108/s1069-0964(2012)0000019008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Johnson, Thomas H., Matthew DuPee, and Wali Shaaker. "The Taliban’s Use of Shabnamah (Night Letters)1." In Taliban Narratives, 53–84. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190840600.003.0005.

Full text
Abstract:
Chapter 5 focuses on a traditional Afghan means to communicate at the Afghan village level – Shabnamah or Night Letters. The tropes of this Taliban IO device include: impact of “foreign invaders” on Afghanistan and how they have traditionally been defeated, Kabul’s “puppet regime.” “cosmic conflict nature of Taliban’s battle, “crusaders promoting the destruction of Islam and Afghan life, the power of “martyrdom,” and revenge and honor. Numerous actual Taliban Shabnamah are presented and translated and assessed relative to their explicit stories. Table 5.1 presents the thematic lines of operation for Taliban night letters including: counter-collaboration, counter-education, counter-reconstruction, counter-mobility, and counter-stability. The rest of the chapter analyses a wide variety of night letters and their associated stories.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Operation HONKER"

1

Ranganath, Santosh, Albert B. Campbell, and Jihong Hwang. "Experimental Investigation and Mechanistic Modeling of the Effects of Tool Edge Hone Effects in Turning Operations." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82893.

Full text
Abstract:
Cutting force predictions from machining process models are generally accurate to within 20% for a specific tool and work material combination over a wide range of cutting conditions when calibrations are accurately performed. The calibration implicitly assumes that the tool used in the cut has a sharp cutting edge (zero radius) or identical (and maybe unknown) cutting edge radius. Significantly higher errors (more than 20%) in force calculations are seen when the same calibration data is used for predictions across a wide range of edge radii, also referred to as an edge hone. This paper describes the preliminary experimental work done to understand the impact of a honed cutting edge on the calibration of the force coefficients used by mechanistic models. Tube turning tests were performed on gray cast iron using tools of varying edge radii, and the cutting and thrust forces measured. Useful correlations between the edge radius and the machining force were observed although some of the results were confounded by variations in the temperature at the cutting edge. A new mechanistic calibration approach is applied to obtain the force coefficients from the measured forces that gives accurate results when the ratio of chip thickness to edge radius is used to calibrate the forces. This method has the advantage of being dependent only on the geometric size of the honed edge in relation to the thickness of the chip that is being removed. This allows the calibration to be performed with lesser experimental effort, while still being valid for predictions over a wide range of edge radii. Validation of this approach was performed using a range of edge hone sizes with peak force prediction errors less than 17%.
APA, Harvard, Vancouver, ISO, and other styles
2

Kamal, A. E. "Using network coding over p-cycles for survivable network operation." In 2007 International Symposium on High Capacity Optical Networks and Enabling Technologies. IEEE, 2007. http://dx.doi.org/10.1109/honet.2007.4600284.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Umetaliev, Akylbek. "Value Chain in Export Honey." In International Conference on Eurasian Economies. Eurasian Economists Association, 2019. http://dx.doi.org/10.36880/c11.02245.

Full text
Abstract:
This paper examines creating a value chain in export honey from the Kyrgyz Republic. The annual production is 12,000 tons, 500 tons are exported. The Supply Chain Operation Reference (SCOR model) at three stages of optimization of honey production has been adapted. The following research methods were used: desk study, survey of producers and consumers, interviews with relevant organizations, personal observations retailers. At the initial stage of optimization, recommended to maintain planning of the number of bee colonies. How to effectively use natural resources for bee colonies - finding useful flora (a flowering mass of plants to collect nectar) and finding areas with the best climate (temperature, humidity, sunshine, air movement) are the objectives of action plan for interim stage. The natural mountain landscape, the sun, air, water give honey special qualities, therefore, at the final stage of market promotion, honey must acquire potential status as a unique product. For honey producers there are two optimal options for export. The first is the packaging of honey in a container of 0.1–0.2 l., and positioning it as an expensive premium product. High marketing costs are offset by high added value in the supply chain. The second is the delivery of honey in large containers of 20–30 l., for further packaging, already in the territory of the buyer. An attractive choice for honey producers with guaranteed product sales and high profitability of sales. Research results increase honey production up to 30% and export volume up to 7%.
APA, Harvard, Vancouver, ISO, and other styles
4

Ahmed, S., and P. Mahmood. "Architecture for grid enhanced operating system." In 2007 International Symposium on High Capacity Optical Networks and Enabling Technologies. IEEE, 2007. http://dx.doi.org/10.1109/honet.2007.4600260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Saikaly, Khalil, Karine Criner-Thai, and Karim Mati. "Effect of Hydrogen and CO Addition, Produced Through POM (Partial Oxidation of Methane) on a CHP Gas Engine." In ASME 2012 Internal Combustion Engine Division Spring Technical Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ices2012-81030.

Full text
Abstract:
This article presents a summary of some experimental results obtained on a 1.4 MW CHP engine. Tests concern the effect of H2 and CO addition to the natural gas at the engine inlet. Hydrogen and CO were obtained through the partial oxidation of methane. A honey-comb Platinum based catalyst was used for the partial oxidisation of methane. Part of the natural gas main stream was deviated and mixed with air to supply the catalyst. Catalyst output (mixture of H2, CO, H2O, CO2, N2 and methane) are then mixed with the main stream of natural gas supplying the engine. Two different tests were conducted, the first one is an operation under a constant average combustion chamber temperature and the other one is an operation at a constant NOX level in the exhaust gases. Results showed a decrease of about 10% in NOX emissions when operating under constant combustion chamber temperature (this temperature is the average temperature of the four strokes inside the cylinders); and a slight increase of engine efficiency for a constant NOX emissions level.
APA, Harvard, Vancouver, ISO, and other styles
6

GILKEY, P. "GEOMETRIC PROPERTIES OF THE CURVATURE OPERATOR." In Differential Geometry in Honor of Professor S S Chern. WORLD SCIENTIFIC, 2000. http://dx.doi.org/10.1142/9789812792051_0005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tica, Eliza Isabela, and Radu Popa. "Modified honey bees mating algorithm for optimal weekly operation of a pumped storage plant." In 2017 International Conference on Energy and Environment (CIEM). IEEE, 2017. http://dx.doi.org/10.1109/ciem.2017.8120837.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

CECCHERINI-SILBERSTEIN, TULLIO G., and ARYEH Y. SAMET-VAILLANT. "A NOTE ON ENDS OF OPERATOR ALGEBRAS." In Proceedings of a Conference in Honor of Akbar Rhemtulla. WORLD SCIENTIFIC, 2007. http://dx.doi.org/10.1142/9789812708670_0002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

El-Badawy, El-Sayed A., Abd El-Naser A. Mohammed, Gaber E. M. El-Abyad, and Mohammed S. F. Tabbour. "Performance characteristics of high speed laser diodes under thermal-irradiated operating conditions." In 2009 6th International Symposium on High Capacity Optical Networks and Enabling Technologies (HONET). IEEE, 2009. http://dx.doi.org/10.1109/honet.2009.5423082.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

PNG, ETHAN. "A QUANTUM FLUCTUATION OPERATOR FOR DEEP N-WELL MOSFET FLICKER NOISE MODELING." In Conference in Honour of the 90th Birthday of Freeman Dyson. WORLD SCIENTIFIC, 2014. http://dx.doi.org/10.1142/9789814590112_0031.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Operation HONKER"

1

Selhorst, Antonius J. Fear, Honor, Interest: An Analysis of Russia's Operations in the Near Abroad (2007-2014). Fort Belvoir, VA: Defense Technical Information Center, April 2015. http://dx.doi.org/10.21236/ad1001855.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Operation HONKER' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography