Relevant bibliographies by topics / Optical fiber sensor

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Optical fiber sensor'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Optical fiber sensor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Optical fiber sensor"

1

Cheng, Tai Hong, Seong Hyun Lim, Chang Doo Kee, and Il Kwon Oh. "Development of Fiber-PZT Array Sensor System." Advanced Materials Research 79-82 (August 2009): 263–66. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.263.

Full text
Abstract:
In this study, array type fiber-PZT senor systems were newly developed with capabilities of detecting both damage location and monitoring of gas or liquid leakage by applying time-frequency analyses. The system consists of two piezoelectric transducers for the signal receiver and generator applications and three optical fibers for wave propagation. The results showed developed fiber-PZT array sensor can accurately measure the position of crack and its intensity. Also the fluid leakage of methyl alcohol as test specimen, on the plate structure has also been investigated employing the fiber-PZT sensors. The ultrasonic wave optical fiber sensor can be used effectively to monitor changes in structural and chemical properties.
APA, Harvard, Vancouver, ISO, and other styles
2

Braunfelds, Janis, Elvis Haritonovs, Ugis Senkans, Inna Kurbatska, Ints Murans, Jurgis Porins, and Sandis Spolitis. "Designing of Fiber Bragg Gratings for Long-Distance Optical Fiber Sensing Networks." Modelling and Simulation in Engineering 2022 (October 5, 2022): 1–14. http://dx.doi.org/10.1155/2022/8331485.

Full text
Abstract:
Most optical sensors on the market are optical fiber Bragg grating (FBG) sensors with low reflectivity (typically 7-40%) and low side-lobe suppression (SLS) ratio (typically SLS <15 dB), which prevents these sensors from being effectively used for long-distance remote monitoring and sensor network solutions. This research is based on designing the optimal grating structure of FBG sensors and estimating their optimal apodization parameters necessary for sensor networks and long-distance monitoring solutions. Gaussian, sine, and raised sine apodizations are studied to achieve the main requirements, which are maximally high reflectivity (at least 90%) and side-lobe suppression (at least 20 dB), as well as maximally narrow bandwidth (FWHM<0.2 nm) and FBGs with uniform (without apodization). Results gathered in this research propose high-efficiency FBG grating apodizations, which can be further physically realized for optical sensor networks and long-distance (at least 40 km) monitoring solutions.
APA, Harvard, Vancouver, ISO, and other styles
3

Han, Yan. "The Building of Optical Fiber Network System Using Hetero-Core Fiber Optic Sensors." Advanced Materials Research 571 (September 2012): 342–46. http://dx.doi.org/10.4028/www.scientific.net/amr.571.342.

Full text
Abstract:
We proposed a novel optical sensory nerve network using pulse switch sensors. The pulse switch sensor generates light loss similar to pulse signals only when ON/OFF states change. Therefore, it has less influence on communications quality compared with conventional switch sensor modules as sensor multiplicity increases. Our simulated results demonstrated that the proposed system can improve sensor multiplicity while maintaining the communications and measuring performance with the same quality as a conventional system by appropriately adjusting the initial loss of the pulse switch sensors. In particular, where ON/OFF time intervals follow exponential distributions with mean values of 5 and 300 s, respectively, the insertion loss of hetero-core segments inserted into pulse switch sensors is 0.3 dB, and the pulse switch sensors have curvature from 0.05 to 0.18. Under these conditions, our enhanced system can increase sensor multiplicity to 23 while maintaining link availability of almost 100%, a distinction error ratio of less than 1%, and a duplicated error ratio of about 0.5%.
APA, Harvard, Vancouver, ISO, and other styles
4

Kleiza, V., and J. Verkelis. "Some Advanced Fiber-Optical Amplitude Modulated Reflection Displacement and Refractive Index Sensors." Nonlinear Analysis: Modelling and Control 12, no. 2 (April 25, 2007): 213–25. http://dx.doi.org/10.15388/na.2007.12.2.14712.

Full text
Abstract:
Some advanced fiber-optic amplitude modulated reflection displacement sensors and refractive index sensors have been developed. An improved three-fiber displacement sensor has been investigated as a refractive index sensor by computer simulations in a large interval of displacement. Some new regularities have been revealed. A reflection fiber-optic displacement sensor of novel configuration, consisting of double optical-pair fibers with a definite angle between the measuring tips of fibers in the pairs has been proposed, designed, and experimentally investigated to indicate and measure the displacement and refractive index of gas and liquid water solutions. The proposed displacement sensor and refractive index sensor configuration improves the measuring sensitivity in comparison with the known measuring methods. The refractive index sensor sensitivity Snsub = 4 × 10−7 RIU/mV was achieved. The displacement sensor sensitivity is Ssub = 1702 mV/µm in air (n = 1.00027).
APA, Harvard, Vancouver, ISO, and other styles
5

Takahara, H., F. Togashi, and T. Aragaki. "Ultrasonic sensor using polarization-maintaining optical fiber." Canadian Journal of Physics 66, no. 10 (October 1, 1988): 844–46. http://dx.doi.org/10.1139/p88-138.

Full text
Abstract:
The interaction between an ultrasonic wave and the laser beam transmitted through a polarization-maintaining optical fiber is analyzed both theoretically and experimentally. An ultrasonic sensor using a polarization-maintaining optical fiber is optically simple; it is easily matched to the source and detection optics; and it has better stability than an optical configuration using two optical fibers.
APA, Harvard, Vancouver, ISO, and other styles
6

Chyad, Radhi M., Mohd Zubir Mat Jafri, and Kamarulazizi Ibrahim. "Nano-Optical Fiber Evanescent Field Sensors." Advanced Materials Research 626 (December 2012): 1027–32. http://dx.doi.org/10.4028/www.scientific.net/amr.626.1027.

Full text
Abstract:
The nanofiber optic evanescent field sensor based on a changed cladding part as a sensor presented numerically. The influences of numerical opening, core radius of the fiber, the wavelength is effected on the light source and the submicron fiber on the sensors are promise to studied in this work. The results pointed out the sensitivity of the sensor increases when the numerical opening of the fiber is increases and the core radius is decreases. The NA of the fiber affects the sensitivity of the sensor. In the uniform core fiber, the increase in the NA increases the sensitivity of the sensor. Therefore, one should choose a fiber with high NA for the design of an evanescent-wave-absorption sensor if the core of the sensing segment uniform in diameter, so that the increase in the penetration depth or number of ray reflections or both, increases the evanescent absorption field and hence the sensitivity of the sensors. Keywords:fiber optic sensor, chemical sensors, biosensors, nanofiber optic.
APA, Harvard, Vancouver, ISO, and other styles
7

Bartelt, Hartmut. "Fiber Bragg Grating Sensors and Sensor Arrays." Advances in Science and Technology 55 (September 2008): 138–44. http://dx.doi.org/10.4028/www.scientific.net/ast.55.138.

Full text
Abstract:
Fiber Bragg gratings have found widespread application in sensor systems, e. g. for temperature, strain or refractive index measurements. The concept of fiber Bragg gratings allows also in a simple way the realisation of arrays of such sensors. The development of such optical fiber sensor systems often requires special fibers and grating structures which may go beyond more conventional Bragg grating structures in typical communication fibers. Concerning fibers there is, for example., a need of achieving fiber gratings in small diameter fibers and fiber tapers as well as in microstructured fibers. Special fiber grating structures are of interest e.g. in the visible wavelength range, which requires smaller spatial structures compared to more conventional gratings in the near infrared wavelength region. Examples for such modern developments in fiber Bragg grating technology for sensor applications will be presented and discussed.
APA, Harvard, Vancouver, ISO, and other styles
8

TSUTSUI, Teruaki, and Satoshi YAMAMOTO. "Optical fiber sensor." Journal of the Japan Society for Precision Engineering 53, no. 12 (1987): 1847–51. http://dx.doi.org/10.2493/jjspe.53.1847.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Moś, Joanna Ewa, Karol Antoni Stasiewicz, and Leszek Roman Jaroszewicz. "Liquid crystal cell with a tapered optical fiber as an active element to optical applications." Photonics Letters of Poland 11, no. 1 (April 3, 2019): 13. http://dx.doi.org/10.4302/plp.v11i1.879.

Full text
Abstract:
The work describes the technology of a liquid crystal cell with a tapered optical fiber as an element providing light. The tapered optical fiber with the total optical loss of 0.22 ± 0.07 dB, the taper waist diameter of 15.5 ± 0.5 μm, and the elongation of 20.4 ± 0.3 mm has been used. The experimental results are presented for a liquid crystal cell filled with a mixture 1550* for parallel orientation of LC molecules to the cross section of the taper waist. Measurement results show the influence of the electrical field with voltage in the range of 0-200 V, without, as well as with different modulation for spectral characteristics. The sinusoidal and square signal shapes are used with a 1-10 Hz frequency range. Full Text: PDF ReferencesZ. Liu, H. Y. Tam, L. Htein, M. L.Vincent Tse, C. Lu, "Microstructured Optical Fiber Sensors", J. Lightwave Technol. 35, 16 (2017). CrossRef T. R. Wolinski, K. Szaniawska, S. Ertman1, P. Lesiak, A. W. Domański, R. Dabrowski, E. Nowinowski-Kruszelnicki, J. Wojcik "Influence of temperature and electrical fields on propagation properties of photonic liquid-crystal fibres", Meas. Sci. Technol. 17, 5 (2006). CrossRef K. Nielsen, D. Noordegraaf, T. Sørensen, A. Bjarklev,T. Hansen, "Selective filling of photonic crystal fibres", J. Opt. A: Pure Appl. Opt. 7, 8 (2005). CrossRef A. A. Rifat, G. A. Mahdiraji, D. M. Chow, Y, Gang Shee, R. Ahmed, F. Rafiq, M Adikan, "Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core", Sensors 15, 5 (2015) CrossRef Y. Huang, Z.Tian, L.P. Sun, D. Sun, J.Li, Y.Ran, B.-O. Guan "High-sensitivity DNA biosensor based on optical fiber taper interferometer coated with conjugated polymer tentacle", Opt. Express 23, 21 (2015). CrossRef X. Wang, O. S. Wolfbeis, "The 2016 Annual Review Issue", Anal. Chem., 88, 1 (2016). CrossRef Ye Tian, W. Wang, N. Wu, X. Zou, X.Wang, "Tapered Optical Fiber Sensor for Label-Free Detection of Biomolecules", Sensors 11, 4 (2011). CrossRef O. Katsunari, Fundamentals of Optical Waveguides, (London, Academic Press, (2006). DirectLink A. K. Sharma, J. Rajan, B.D. Gupta, "Fiber-Optic Sensors Based on Surface Plasmon Resonance: A Comprehensive Review", IEEE Sensors Journal 7, 8 (2007). CrossRef C. Caucheteur, T. Guo, J. Albert, "Review of plasmonic fiber optic biochemical sensors: improving the limit of detection", Anal. Bioanal.Chem. 407, 14 (2015). CrossRef S. F. Silva L. Coelho, O. Frazão, J. L. Santos, F. X.r Malcata, "A Review of Palladium-Based Fiber-Optic Sensors for Molecular Hydrogen Detection", IEEE SENSORS JOURNAL 12, 1 (2012). CrossRef H. Waechter, J. Litman, A. H. Cheung, J. A. Barnes, H.P. Loock, "Chemical Sensing Using Fiber Cavity Ring-Down Spectroscopy", Sensors 10, 3 (2010). CrossRef S. Zhu, F. Pang, S. Huang, F.Zou, Y.Dong, T.Wang, "High sensitivity refractive index sensor based on adiabatic tapered optical fiber deposited with nanofilm by ALD", Opt. Express 23, 11 (2015). CrossRef L. Zhang, J. Lou, L. Tong, "Micro/nanofiber optical sensors", Photonics sensor 1, 1 (2011). CrossRef L.Tong, J. Lou, E. Mazur, "Single-mode guiding properties of subwavelength-diameter silica and silicon wire waveguides", Opt. Express 11, 6 (2004). CrossRef H. Moyyed, I. T. Leite, L. Coelho, J. L. Santos, D. Viegas, "Analysis of phase interrogated SPR fiber optic sensors with bimetallic layers", IEEE Sensors Journal 14, 10 (2014). CrossRef A. González-Cano, M. Cruz Navarette, Ó. Esteban, N. Diaz Herrera , "Plasmonic sensors based on doubly-deposited tapered optical fibers", Sensors 14, 3 (2014). CrossRef K. A. Stasiewicz, J.E. Moś, "Threshold temperature optical fibre sensors", Opt. Fiber Technol. 32, (2016). CrossRef L. Zhang, F. Gu, J. Lou, X. Yin, L. Tong, "Fast detection of humidity with a subwavelength-diameter fiber taper coated with gelatin film", Opt. Express 16, 17 (2008). CrossRef S.Zhu, F.Pang, S. Huang, F. Zou, Q. Guo, J. Wen, T. Wang, "High Sensitivity Refractometer Based on TiO2-Coated Adiabatic Tapered Optical Fiber via ALD Technology", Sensors 16, 8 (2016). CrossRef G.Brambilla, "Optical fibre nanowires and microwires: a review", J. Optics 12, 4 (2010) CrossRef M. Ahmad, L.L. Hench, "Effect of taper geometries and launch angle on evanescent wave penetration depth in optical fibers", Biosens. Bioelectron. 20, 7 (2005). CrossRef L.M. Blinov, Electrooptic Effects in Liquid Crystal Materials (New York, Springftianer, 1994). CrossRef L. Scolari, T.T. Alkeskjold, A. Bjarklev, "Tunable Gaussian filter based on tapered liquid crystal photonic bandgap fibre", Electron. Lett. 42, 22 (2006). CrossRef J. Moś, M. Florek, K. Garbat, K.A. Stasiewicz, N. Bennis, L.R. Jaroszewicz, "In-Line Tunable Nematic Liquid Crystal Fiber Optic Device", J. of Lightwave Technol. 36, 4 (2017). CrossRef J. Moś, K A Stasiewicz, K Garbat, P Morawiak, W Piecek, L R Jaroszewicz, "Tapered fiber liquid crystal hybrid broad band device", Phys. Scripta. 93, 12 (2018). CrossRef Ch. Veilleux, J. Lapierre, J. Bures, "Liquid-crystal-clad tapered fibers", Opt. Lett. 11, 11 (1986). CrossRef R. Dąbrowski, K. Garbat, S. Urban, T.R. Woliński, J. Dziaduszek, T. Ogrodnik, A,Siarkowska, "Low-birefringence liquid crystal mixtures for photonic liquid crystal fibres application", Liq. Cryst. 44, (2017). CrossRef S. Lacroix, R. J. Black, Ch. Veilleux, J. Lapierre, "Tapered single-mode fibers: external refractive-index dependence", Appl. Opt., 25, 15 (1986). CrossRef J.F. Henninot, D. Louvergneaux , N.Tabiryan, M. Warenghem, "Controlled Leakage of a Tapered Optical Fiber with Liquid Crystal Cladding", Mol. Cryst.and Liq.Cryst., 282, 1(1996). CrossRef
APA, Harvard, Vancouver, ISO, and other styles
10

Vašínek, Vladimír, Pavel Šmíra, Vladimira Rasnerova, Andrea Nasswettrová, Jakub Jaros, Andrej Liner, and Martin Papes. "Usage of Distributed Fiber Optical Temperature Sensors during Building Redevelopment." Advanced Materials Research 923 (April 2014): 229–32. http://dx.doi.org/10.4028/www.scientific.net/amr.923.229.

Full text
Abstract:
This contribution describes the novel unique technology with the usage of fiber optical sensors with temperature resolution up to 0.01°C and spatial resolution 1m. This technology is supplemented with fiber optical strain sensor with pressure resolution 1Pa. Fiber optical sensors are based on nonlinear effects within the optical fibers, they behave as distributed sensors making possible to measure temperature and strain with one fiber in many points contemporarily during building redevelopments. For temperature measurements Raman scattering within multimode optical fiber is used. Results from real redevelopments are presented.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Optical fiber sensor"

1

Wang, Xingwei. "Optical Fiber Tip Pressure Sensor." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/35490.

Full text
Abstract:

Miniature pressure sensors which can endure harsh environments are a highly sought after goal in industrial, medical and research fields. Microelectromechanical systems (MEMS) are the current methods to fabricate such small sensors. However, they suffer from low sensitivity and poor mechanical properties.

To fulfill the need for robust and reliable miniature pressure sensors that can operate under high temperatures, a novel type of optical fiber tip sensor only 125μm in diameter is presented in this thesis. The essential element is a piece of hollow fiber which connects the fiber end and a diaphragm to form a Fabry-Pérot cavity. The all-fused-silica structure fabricated directly on a fiber tip has little temperature dependence and can function very well with high resolution and accuracy at temperatures up to 600ï °C. In addition to its miniature size, its advantages include superior mechanical properties, biocompatibility, immunity to electromagnetic interference, disposability and cost-effective fabrication.

The principle of operation, design analysis, fabrication implementation and performance evaluation of the sensor are discussed in detail in the following chapters.


Master of Science
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Shiao-Chiu. "Axial offset effects upon optical fiber sensor and splice performance." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/91128.

Full text
Abstract:
A kind of intensity modulated fiber sensor utilizing axial offset parameter is proposed. The theoretical analysis and experimental characteristics of this sensor are described. All the theoretical results derived in this thesis are based on assuming a uniform power distribution in the fibers. An expression of coupling efficiency of central dipped parabolic graded index fibers due to axial offset is derived. The results show less sensitivity to axial offset for the central dipped fibers than for the parabolic profile fibers without a dip. Expressions of coupling efficiency of graded index fibers due to axial offset for several different values of a are also derived. The results show that sensitivity increases as the value of a decreases. A general expression of coupling efficiency which is valid for small values of axial offset is derived. This expression exhibits a linear relationship between coupling efficiency and small axial offset. Coupling efficiencies versus fiber end separation and axial offset of step index fibers have been measured. The measurements show that coupling efficiency is much more sensitive to axial offset than end separation. A simple construction of the axial offset fiber sensor is described. An approximate linear relationship between the output power and the mechanical loading has been obtained for this sensor. Several ways of increasing the sensitivity of this sensor are discussed.
M.S.
APA, Harvard, Vancouver, ISO, and other styles
3

Bronk, Karen Srour. "Imaging based sensor arrays /." Thesis, Connect to Dissertations & Theses @ Tufts University, 1996.

Find full text
Abstract:
Thesis (Ph.D.)--Tufts University, 1996.
Adviser: David R. Walt. Submitted to the Dept. of Chemistry. Includes bibliographical references. Access restricted to members of the Tufts University community. Also available via the World Wide Web;
APA, Harvard, Vancouver, ISO, and other styles
4

Wavering, Thomas A. "Optical Path Length Multiplexing of Optical Fiber Sensors." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36037.

Full text
Abstract:
Optical fiber sensor multiplexing reduces cost per sensor by designing a system that minimizes the expensive system components (sources, spectrometers, etc.) needed for a set number of sensors. The market for multiplexed optical sensors is growing as fiberoptic sensors are finding application in automated factories, mines, offshore platforms, air, sea, land, and space vehicles, energy distribution systems, medical patient surveillance systems, etc. Optical path length multiplexing (OPLM) is a modification to traditional white-light interferometry techniques to multiplex extrinsic Fabry-Perot interferometers and optical path length two-mode sensors. Additionally, OPLM techniques can be used to design an optical fiber sensor to detect pressure/force/acceleration and temperature simultaneously at a single point. While power losses and operating range restrictions limit the broadscale applicability of OPLM, it provides a way to easily double or quadruple the number of sensors by modifying the demodulation algorithm. The exciting aspect of OPLM is that no additional hardware is needed to multiplex a few sensors. In this way OPLM works with conventional technology and algorithms to drastically increase their efficiency. [1]
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
5

Andrews, Jeffrey Pratt. "Longitudinal misalignment based strain sensor." Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/43283.

Full text
Abstract:

A practical fiber optic strain sensor has been developed to measure strains in the range of 0.0 to 2.0 percent strain with a resolution ranging between 10 and 100 microstrain depending on sensor design choices. This intensity based sensor measures strain by monitoring strain induced longitudinal misalignment in a novel fiber interconnection. This interconnection is created by aligning fibers within a segment of hollow core fiber. Related splice loss mechanisms are investigated for their effect on resolution. The effect of gauge length and launch conditions are also investigated.


Master of Science
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Qiao. "ESA based fiber optical humidity sensor." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/10134.

Full text
Abstract:
Several techniques for measuring humidity are presented. The goal of the study is to use the electrostatic self-assembled monolayer synthesis process to fabricate a Fabry-Parot Cavity based optical fiber humidity sensor. The sensing scheme bases on the refractive index change with relative humidity of the film applied to the end of optical fiber. That is, the change in reflected optical power indicates certain humidity. To achieve this, some chemicals induce on specific coating materials were applied at the end of optical fiber. In this thesis, experimental results are given to prove that the humidity sensor has high sensitive and fast response time. Furthermore, we investigate the potential for the use of human breathing monitoring and air flow rate detection. Results from preliminary tests of each are given.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
7

Miller, Mark S. "Optical fiber-based corrosion sensor systems." Diss., This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-03042009-041455/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gaikwad, Parikshit S. "Chemically deposited optical fiber humidity sensor." Master's thesis, Mississippi State : Mississippi State University, 2003. http://library.msstate.edu/etd/show.asp?etd=etd-06092003-141607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fan, Chenjun. "Fiber optic sensor based on dual ring resonator system /." Online version of thesis, 1992. http://hdl.handle.net/1850/11070.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ipson, Benjamin L. "Polarimetric Temperature Sensor Using Core-replaced Fiber." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd606.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Optical fiber sensor"

1

V, Grattan K. T., and Meggitt B. T, eds. Optical fiber sensor technology. London: Chapman & Hall, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

V, Gratten K. T., and Meggitt B. T, eds. Optical fiber sensor technology. Dordrecht: Kluwer, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-017-2484-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5787-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-1210-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4757-6077-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-6079-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Grattan, K. T. V., and B. T. Meggitt, eds. Optical Fiber Sensor Technology. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-6081-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Grattan, K. T. V. Optical Fiber Sensor Technology. Dordrecht: Springer Netherlands, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Grattan, K. T. V. Optical Fiber Sensor Technology: Fundamentals. Boston, MA: Springer US, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Optical fiber sensor"

1

Weik, Martin H. "optical fiber sensor." In Computer Science and Communications Dictionary, 1173. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_13044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rogers, A. J. "Nonlinear Optics and Optical Fibers." In Optical Fiber Sensor Technology, 189–240. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-6079-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grattan, K. T. V. "Optical Fiber Sensors: Optical Sources." In Optical Fiber Sensor Technology, 239–92. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-6081-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weir, K., and J. D. C. Jones. "Optical Fiber Sensors: Optical Detection." In Optical Fiber Sensor Technology, 293–325. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-6081-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Langford, N. "Optical fiber lasers." In Optical Fiber Sensor Technology, 37–98. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5787-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bucaro, Joseph A. "Optical Fiber Sensor Coatings." In Optical Fiber Sensors, 321–38. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3611-9_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Blake, J. "Fiber optic gyroscopes." In Optical Fiber Sensor Technology, 303–28. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5787-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Christensen, D. A., and J. T. Ives. "Fiberoptic Temperature Probe Utilizing a Semiconductor Sensor." In Optical Fiber Sensors, 361–67. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3611-9_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Baldini, F., M. Brenci, G. Conforti, R. Falciai, and A. G. Mignani. "Model for an Optical Fiber pH Sensor." In Optical Fiber Sensors, 437–43. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3611-9_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Culshaw, Brian. "Distributed and Multiplexed Fibre Optic Sensor Systems." In Optical Fiber Sensors, 165–84. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3611-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Optical fiber sensor"

1

Bradley, Lee W., Yusuf S. Yaras, and F. Levent Degertekin. "Acousto-Optic Electric Field Sensor Based on Thick-Film Piezoelectric Transducer Coated Fiber Bragg Grating." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.f1.2.

Full text
Abstract:
An acousto-optic electric field sensor based on piezoelectric thick-film coated FBG is developed for magnetic resonance imaging. The sensor operates in the 20-150MHz range, addressing challenges of electro-optical field sensors at low RF frequencies.
APA, Harvard, Vancouver, ISO, and other styles
2

Sanchez-Gonzalez, A., A. Rodriguez-Rodriguez, R. Dauliat, R. Jamier, P. Roy, R. A. Perez-Herrera, and M. Lopez-Amo. "Micro-displacement Sensor based on Hollow Core Fiber Interferometers." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.th4.10.

Full text
Abstract:
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhong, Shuda, Kehao Zhao, Zhichun Fan, Wu Jingyu, Yuqi Li, Qirui Wang, and Kevin P. Chen. "Hermetic Fiber Sensor Packaging through Pressure Boundary for Harsh Environment Applications." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.w4.66.

Full text
Abstract:
This paper presents a hermetic fiber sensor packaging technique using glass sealants through pressure boundaries for harsh environment applications. The embedded fiber sensors are leak-proof at 1MPa at temperatures up to 220oC.
APA, Harvard, Vancouver, ISO, and other styles
4

Cao, Rongtao, Jingyu Wu, Mohan Wang, Jieru Zhao, Yang Yang, and Kevin P. Chen. "Intrinsic Fabry-Perot Interferometer Fiber Sensor Array for Hydrogen Sensing at Room and High Temperatures." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.th4.45.

Full text
Abstract:
This paper presents multi-point hydrogen fiber sensors using Intrinsic Fabry-Perot interferometer (IFPI) as sensor platforms. Pd-doped TiO2 nano-porous coating was used to detect hydrogen at room temperature and 750°C.
APA, Harvard, Vancouver, ISO, and other styles
5

Stöhr, A., R. Heinzelmann, T. Alder, W. Heinrich, T. Becks, D. Kalinowski, M. Schmidt, M. Groß, and D. Jäger. "Optically Powered Integrated Optical E-Field Sensor." In Optical Fiber Sensors. Washington, D.C.: OSA, 1997. http://dx.doi.org/10.1364/ofs.1997.owc30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tomboza, Wendy, Damien Labat, Remi Habert, Romain Cotillard, Nicolas Roussel, Didier Pohl, Guillaume Laffont, Minh Chau Phan Huy, and Géraud Bouwmans. "Comparison of fiber in line Fabry-Pérot pressure sensors for harsh environment in aeronautic field." In Optical Fiber Sensors. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/ofs.2022.th4.22.

Full text
Abstract:
In this paper, we propose a comparison of fiber in-line Fabry-Pérot pressure sensors with different structure. The modeling and simulation of pressure sensor with different diaphragm and cavity shape is made. The sensor temperature response up to 900°C is presented. Pressure measurement up to 70bar of four different sensors are demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
7

Lawson, Christopher M. "Fiber-optic electric field sensor." In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1986. http://dx.doi.org/10.1364/oam.1986.maa2.

Full text
Abstract:
A novel type of fiber-optic electric field sensor has been demonstrated. This device was fabricated by fusing piezoelectrically sensitized fibers into a fiber-optic Mach-Zehnder interferometer testbed. Quadrature stabilization for the interferometer test-bed was provided by an active homodyne scheme. The fibers were sensitized to an electric field by embedding them in a piezoelectric material that expands and contracts in response to the electric field. The resulting pressure waves modulate the optical path length through the sensitized fiber, which modulates the output of the fiber-optic interferometer. Two designs were used to sensitize fibers to electric fields. In the first design, unjacketed fibers were embedded in a piezoelectric lithium borosilicate (LBS) glass plate. In the second design, fibers were embedded in a composite PZT material. One of the LBS sensitized fibers and three of the PZT sensitized fibers were tested in the fiber-optic interferometer test-bed. The signal to noise of each sensor was mapped out vs frequency, with a reference electric field applied across the sensors. Future efforts will be devoted to directly coating an unjacketed fiber with a thin LBS coating.
APA, Harvard, Vancouver, ISO, and other styles
8

Harmer, A. L. "Distributed microbending sensor." In Optical Fiber Sensors. Washington, D.C.: OSA, 1985. http://dx.doi.org/10.1364/ofs.1985.thbb2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ikeda, Michael H., Mei H. Sun, and Stephen R. Phillips. "Fiberoptic Flow Sensor." In Optical Fiber Sensors. Washington, D.C.: OSA, 1988. http://dx.doi.org/10.1364/ofs.1988.fcc6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cazzulani, Gabriele, Martina Chieppi, Andrea Colombo, and Paolo Pennacchi. "Optimal sensor placement for continuous optical fiber sensors." In Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, edited by Hoon Sohn. SPIE, 2018. http://dx.doi.org/10.1117/12.2297621.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Optical fiber sensor"

1

Zumberge, Mark A., and Jonathan Berger. An Optical Fiber Infrasound Sensor. Fort Belvoir, VA: Defense Technical Information Center, June 2006. http://dx.doi.org/10.21236/ada456389.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Onstott, James R. Optical Fiber for Acoustic Sensor Applications. Fort Belvoir, VA: Defense Technical Information Center, February 1993. http://dx.doi.org/10.21236/ada261580.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Anbo Wang, Russell May, and Gary R. Pickrell. Single Crystal Sapphire Optical Fiber Sensor Instrumentation. Office of Scientific and Technical Information (OSTI), October 2000. http://dx.doi.org/10.2172/882005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

A. Wang, G. Pickrell, and R. May. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION. Office of Scientific and Technical Information (OSTI), September 2002. http://dx.doi.org/10.2172/808134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pickrell, Gary, Brian Scott, Anbo Wang, and Zhihao Yu. Single-Crystal Sapphire Optical Fiber Sensor Instrumentation. Office of Scientific and Technical Information (OSTI), December 2013. http://dx.doi.org/10.2172/1238357.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, A., G. Pickrell, and R. May. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION. Office of Scientific and Technical Information (OSTI), October 2001. http://dx.doi.org/10.2172/801212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, A., G. Pickrell, and R. May. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION. Office of Scientific and Technical Information (OSTI), October 2002. http://dx.doi.org/10.2172/829662.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

A. Wang, G. Pickrell, and R. May. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION. Office of Scientific and Technical Information (OSTI), September 2002. http://dx.doi.org/10.2172/819437.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Angel, S. M., and J. F. Poco. High-temperature optical-fiber pH sensor: Final report. Office of Scientific and Technical Information (OSTI), June 1989. http://dx.doi.org/10.2172/6094093.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Anbo Wang and Kristie Cooper. Optical Fiber Sensor Instrumentation for Slagging Coal Gasifiers. Office of Scientific and Technical Information (OSTI), July 2008. http://dx.doi.org/10.2172/943309.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Optical fiber sensor' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography