To see the other types of publications on this topic, follow the link: Optická měření.
Dissertations / Theses on the topic 'Optická měření'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Optická měření.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Wintr, Aleš. "Měření parametrů optických čoček." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219103.
Full textAbstract:
This paper contains a basic overview and description of optical lenses. It introduces different types of optical lenses and shows how they influence the passing of light beams. It deals with the production of optical lenses and their practical use. It describes types of optical blemishes that exist in real optical systems. Particular attention is given to parameters of optical lenses and their measurement in practice. It includes a Matlab program to calculate parameters of optical lenses derived from the measurements.
2
Ambrož, Jan. "Návrh, výstavba a měření optických přístupových sítí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218998.
Full textAbstract:
The work deals with the possibilities of realization of optical access networks. They are introduced to FTTx optical access, including their specifications and differences. The document was largely devoted to passive and active optical networks. These two different technological approaches are explained and compared. Are presented technical solutions of routes - traditional options for laying underground or into the air, but also as an alternative microtubing. Mentioned are also the active network technology. The work also included the issue of measurement of optical access networks. They are illuminated important transmission parameters and methods for their measurement. The whole work is directed to the full FTTH network design according to the standard GEPON. In designing the use of theoretical information contained in each chapter. It does the form of technical documentation in accordance with the procedures used in practice, contains drawings, specific technical solutions and a detailed budget price. The design was verified by attenuation of balance. Finally there are the results of simulations of the proposed network in OptiSystem7.
3
Kopečný, Josef. "Optická metoda měření kontrakce izolované srdeční buňky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219250.
Full textAbstract:
In this master´s thesis we will firstly focused on the description of a cyte in terms of structure as well as in terms of electrical and chemical processes. We will examine a processes, which make a contraction and the processes on cyte membrane. We will also analyse image processing methods and methods for measuring the contraction. The block diagram will be designed and requirements for the measuring platform will be specified. The programme will be realized in LabWIEV programming language.
4
Švrček, Martin. "Nové přístupy pro optická měření elektrické aktivity myokardu." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-233536.
Full textAbstract:
This dissertation deals with new approaches in cardiac optical mapping. The principle of cardiac optical mapping as well as the current research in this field was described. The new measurement system was developed and its characteristics presented. The system design allows epicardial and endocardial mapping, employing new ratiometric techniques in 2D acquisition and simultaneous electrical and optical mapping. The measured characteristics of fluorescent dye di-4-ANEPPSS were presented. The relation between movement and consequent motion artifacts is well described. Several new approaches in signal processing were proposed, including new ratiometry technique and using image registration to suppress motion artifacts. The algorithm for elastic image registration of optical signals and innovative method for verification of registration process were presented. Application of all proposed approaches and its results are included and discussed.
5
Flajšmanová, Jana. "Měření extinkčních spekter opticky zachycených plazmonických nanočástic." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232025.
Full textAbstract:
This thesis deals with the dark-field imaging and the optical spectroscopy of optically trapped plasmonic nanoparticles. The optical trapping and the characterization of a single particle or multiple nanoparticles as well are demonstrated. The number of the optically trapped particles can be estimated from the dark-field scattering intensity. Experiments show the presence of the interparticle coupling among trapped metallic nanoparticles which has not been observed in case of dielectric particles. The scattering spectra of the plasmonic nanoparticles were compared with theoretical models based on the Mie theory and the Discrete dipole approximation.
6
Gajdoš, Jaroslav. "Metodika měření optických sítí FTTH." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218131.
Full textAbstract:
The main topic of this master thesis is a FTTH measurement methodology of optical networks and its specific features 9 compared with other measurement methodologies. Also, the use of the FTTH measurement methodology: an example of measurements of a passive network with splitter 1:8 and analysis of the results of these experimental measurements. The first part of the thesis concerns itself with the description of optical networks and characteristics and features of the FTTH networks. A detailed description of the passive optical networks is provided: e.g. the optical network unit ONU, the optical line termination OLT, and, most importantly, the passive optical splitter. The wavelength division multiplex 9 WDM 9 which is used in passive optical networks is also described in detail. The chapter on measurement methodologies focuses in detail and provides many examples of currently used measurement methodologies of these networks. The best results are currently achieved with the OTDR methodology. The second part of the thesis concentrates on the description of the measurement of a passive optical network with splitter 1:8 using the methods described in previous chapters. As conclusion, a detailed analysis, assessment of the results and their usefulness when put into practice is provided.
7
Vitásek, Jan. "Měření rozložení optické intenzity ve vzdálené zóně." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217789.
Full textAbstract:
The topic of this master’s thesis is energy measurement of the optical intensity distribu-tion at the far field. Properties of the optical intensity and the optical power are described. In this thesis solution of wave equation is done. The plane wave, spherical wave and Gaussian beam are described. In this thesis, optical trace of laser beam from transmitter laser diode to receiver PIN photodiode is described. One of the solved problems is diffraction on the lens socket. The basic configuration for diffraction investigation on lens socket was created. There were transmitting laser diode, stop with circular apertures and PIN photodiode used in the experiment. In the other part, thesis deals with measuring and detection of the optical beam. Sorts of photodiodes and their characteristics were analysed.
8
Slovák, Jiří. "Implementace algoritmu pro měření parametrů energetických materiálů v obvodu FPGA." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220352.
Full textAbstract:
In the text of the master´s thesis, it is at first briefly referred about Energetic Material Measurement topic in general. Emphasis is placed especially at the description of the Velocity of Detonation and short analysis of selected measurement method. The most significant part of the paper is dedicated to the design and description of the system that was created in ISE Design Suite environment using VHDL language. The development was performed with respect to oncoming integration into the board with FPGA and A/D converters. The operation of detection algorithm which was created based on the MATLAB model was verified in the final part of the thesis by simulation of processing of real optical probe signals.
9
Černý, Michal. "Optimalizace a měření parametrů PON sítě FTTx." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218961.
Full textAbstract:
Práce rozebírá současný vývoj na poli pasivních optických sítí a jednotlivé generace přenosových standardů. Podrobněji se zabývá parametry ODN, metodami jejich měření a volbou potřebných měření v praxi. Hlavní část práce je zaměřena na měření pasivního WDM prvku, kde je provedena analýza vstupů a výstupů, měření vložného útlumu a přelechů podle ORL na provozních vlnových délkách.
10
Kužela, Jan. "Návrh, realizace a měření pasivní optické sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317033.
Full textAbstract:
The aim of this thesis is to formulate the design of optical access network in designated area. The design is focused on the physical network layer and it covers optical fibers, cable protectors and links, optical hubs, racks and active components. The thesis also docu- ments network architecture, the configuration of active components and provides results from monitoring of selected network segments. The thesis consists of the theoretical part and practical part. In the theoretical part, there is an introduction to optical networks, their configurations (FTTH, FTTB, FTTC, FTTN), relevant networking standards and technologies. The practical part of the thesis covers design proposal of a network located in Slavičín. The design reuses infrastructure and technologies of existing network. The proposed design follows FTTH architecture which has benefits of low maintenance cost and it also fulfills GPON standard.
11
Bureš, Jan. "Automatická optická kontrola slícování kompletních vozidel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-377362.
Full textAbstract:
This diploma thesis deals with concept of automatic inspection workplace for fitting car at assembly inspection line at TPCA as a car manufacture company. Theoretic part is focused on the assembly inspection at TPCA and also presents a current optical inspection at the industry with regard to the topic of this thesis. Practical part contains analysis of the current condition and workplace concept of automatic inspection and measuring method of complete car. Thereafter it brings the technical and economical contributions for this company when my concept implemented.
12
Janáčková, Lada. "Vizualizace a optická měření vnitřního a vnějšího dvoufázového proudění u tlakových vířivých trysek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378277.
Full textAbstract:
Tato práce se zabývá studií Simplex a SR verze původní trysky používané ve spalovací komoře malého proudového motoru. Pro lepší porozumění procesu rozprašování byl vyroben transparentní model obou trysek v měřítku 10:1. Tvorba spreje u tlakové vířivé trysky je komplexní proces dvoufázového proudění. Vnitřní a vnější proudění bylo zkoumáno pomocí Laserového Dopplerovského Anemometru a vysokorychlostní kamery při vstupních tlacích p = 0.5, 1.0 a 1.5 MPa s použitím kerosinu a p-Cymenu. Z hlediska vnitřního proudění byla provedena charakteristika vzdušného jádra a zkoumán vliv různých SFR hodnot na délku a průměr jádra. Dále byly objasněny rychlostní profily společně s jejich fluktuačními složkami vzhledem k Reynoldsovu číslu a použité kapalině. Také jednoduchý numerický model byl vyvinut k odhadu vnitřního proudění pomocí trackování částic. V případě vnějšího proudění byl zkoumán vliv vstupního tlaku na rozpadovou vzdálenost spreje a úhel kužele spreje.
13
Hanák, Pavel. "Optická detekce elektrogramů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220286.
Full textAbstract:
The aim of the study was focused on problem of electrograms recording with using voltage sensitive dyes. Study of electrograms recording was extended with thema of optical detectors suitable for measurement and noise analysis. Elimination of noise and disturption was made in program Matlab; lowpass filtration and wavelet transformation was used. Application for electrograms analysis was developed in latter part of this work.
14
Wojewoda, Ondřej. "Měření fáze spinových vln pomocí Brillouinova rozptylu světla: vývoj zařízení a jeho aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417148.
Full textAbstract:
Spinové vlny mají potenciál být použity jako nová platforma pro přenos a zpracování dat, protože mohou dosáhnout vlnových délek v rozsahu nanometrů a frekvencí v rozsahu terahertzů. K tomu, aby bylo možné navrhnout zařízení a logické obvody založené na spinových vlnách, je zapotřebí získat informace o prostorovém rozložení intenzity spinové vlny a pokud je to možné, také o jejich fázi. To lze měřit pomocí fázově rozlišeného fokuso-vaného Brillouinova rozptylu světla (µ -BLS). Předložená práce se zabývá rozšířením stávající optické sestavy o možnost měření fáze, kde doposud bylo možné měřit pouze intenzitu. Toto rozšíření sestavy je důkladně popsáno a charakterizováno. Schopnosti optické sestavy jsou demonstrovány ve studii šíření spinových vln skrz Néelovu doménovou stěnu. Získané 2D mapy intenzity spinových vln ukazují, že propagace přes doménovou stěnu je ovlivněna topologicky vynucenou kruhovou Blochovou čarou ve středu doménové stěny a že režim propagace závisí na frekvenci spinových vln. V prvním režimu propagace se vytvoří dva svazky spinových vlny šířící se kolem kruhové Blochovy čáry, zatímco ve druhém režimu se spinové vlny šíří pouze středem. Fázově rozlišené µ-BLS měření odhaluje fázový po- sun spinových vln pro oba režimy. Mikromagnetické modelování spinových vln ukazuje rozrušení jejich fázových vlnoploch, které je třeba brát v úvahu při interpretaci měření a navrhování potenciálních zařízení. Mikromagnetické simulace ukazují, že vnější magnetické pole může být použito k pohybu kruhové Blochovy čáry ve stěně domény, a tedy k manipulaci spinových vln.
15
Josiek, Stanislav. "Měření koncentrace atomárního dusíku v dohasínajícím dusíkovém plazmatu." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2014. http://www.nusl.cz/ntk/nusl-217021.
Full textAbstract:
Clean post-discharge nitrogen plasma and nitrogen plasma with different traces have been focus of scientists for more than 50 years and there were published many articles on theme active discharge, post-discharge, processes and reactions. It is possible to create kinetic models from all these information and then calculate concentrations of elements in atomic form. This diploma thesis is focused on measuring of concentration of atomic nitrogen for different conditions (decay time, pressure, admixture). The titration method by nitric oxide in post-discharge was used to determinate of concentration of atomic nitrogen. All experimental results were obtained by the optical emission spectroscopy. Optical emission spectra were taken in the range of 300-600 nm. DC discharge was created in a quartz tube in a flowing regime. The flowing regime was chosen for this experiment because of better time resolution of decay time, order in milliseconds. Decay time was in the range of 16 – 82 ms for individual experiments. Nitrogen flow was 400 mln/min. Nitrogen oxide flow was in the range of 0-10 mln/min and it was added at the selected post-discharge time. Trace of methane was 0,006 % of the whole volume. Total gas pressure was set on values from 500 to 4000 Pa. The output of discharge was set on constant value of current 150 mA and the output has changed according to the amount of pressure. Nitrogen first positive, second positive and first negative spectral systems, NO spectral system and NO2* spectral system were recognized in all measured spectra. Absolute concentration of atomic nitrogen was specified by the method of titration of NO. Traces of methane increase dissociation of molecular nitrogen and therefore increase the concentration of atomic nitrogen. This thesis brings new results into longtime research of moon Titan and new results into study of processes in nitrogen-methane plasma.
16
Dallal, Anas Omar. "Metodika návrhu PON sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218816.
Full textAbstract:
Cílem této práce je analyzovat současný stav přístupových optických sítí,a hlouběji prozkoumat PON metodiku a návrh sítě. Navrhnul jsem síť založenou na konceptu FTTH pro 90 rodinných domů ovládané z centrální stanice vzdálené 20 km. Zabýval jsem se problémy při návrhu FTTH, konkrétně pasivní optickou sítí. Dále jsem se zabýval ATM-PON a Ethernet PON (EPON), které jsou založeny na společné síťové architektuře, PON, ale používají jiné přenosové technologie na podporu integrovaných služeb a jiné protokoly. Po zadání (optimálního) síťového řešení, které se hodí pro nabídku Triple-Play služeb. Dále budu popisovat, jak fungují síťová propojení a také budou popsány metody měření a testování navržené sítě "po aktivaci a nastavení sítě" a "před aktivací síťových služeb ". Při měření jsem také používal OTDR a prakticky ověřil charakteristiku linky. V práci je také naznačeno monitorování optické sítě.
17
Kohoutek, Michal. "Metoda fyzikálního modelování přechodových hran v obraze pro určení skutečné pozice obrysu předmětu." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233452.
Full textAbstract:
Doctoral thesis is focused on a design of a new original image transition edge physical modeling method for exact object shape position determination. Automatic Optical Inspection systems for the high accuracy optical measurements is main application area for designed method. The new method design is based on precise physical analysis of a defined imaging system. Object side telecentric lens, telecentric backlight source and CCD video camera are main parts of the analyzed imaging system. New image transition edge physical model and method for accurate shape position detection within the model are derived by geometrical and Fourier optics imaging system analysis. Possible influences of the model parameters changes to the accuracy of shape position detection are studied precisely. A new modeling function suitable for implementation in a new optimal approximation method is derived from the physical transition edge model. The modeling function optimal approximation method is implemented in to a Tester2D measuring system and verified by length etalon measurements. The Tester2D measuring system was successfully accredited for dimensions measurement in range with accuracy up to . Documentation of results of the accreditation process with the record of obtained results from measurement system in scope of preformed interlaboratory comparison tests are appended to the doctoral thesis.
18
Midlíková, Jana. "Návrh propojení far-infrared spektrometru k supravodivému magnetu a magneto-optické měření ve far-infrared oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382287.
Full textAbstract:
Práca sa zaoberá vývojom ďalekej infračervenej spektroskopie v silnom magnetickom poli. Kombinácia ďalekej infračervenej spektroskopie a silného magnetického poľa je veľmi dôležitým nástrojom pri charakterizácii materiálov, ako sú jedno-molekulové magnety. Predstavuje tiež ideálnu experimentálnu techniku, ktorá dokáže skúmať a objasniť vlastnosti nových 2D materiálov. Ďaleká infračervená spektroskopia v magnetickom poli taktiež umožňuje študovať elektrónovú paramagnetickú rezonanciu (EPR) jedno-molekulových magnetov s veľmi veľkým delením pri nulovom poli, hlavne na báze komplexov prechodných kovov alebo lantanoidov, v ktorých bežne používané EPR systémy neposkytujú experimentálny prístup k magnetickým rezonančným prechodom. V práci sú podrobne popísané dve zostavy ďaleko infračervených spektrometrov pripojené k supravodivým magnetom. Prvá opísaná zostava, ktoré sa nachádza na univerzite v Stuttgarte, je už zmontovaná a jej výkon je diskutovaný. Magneto-optické merania jedno-molekulových magnetov vykonané na tejto zostave sú predstavené. Druhá magneto-optická zostava čerpá zo skúseností získaných pri prvej zostave a je určená pre CEITEC.
19
Hradílek, Pavel. "Síť FTTx." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218130.
Full textAbstract:
The aim of this thesis is to clarify the issue of optical access networks, and to acquaint the reader with problems of their design and implementation. The introductory chapter describes the technologies and topologies, which are the most experienced in dealing with optical access network. There are a comparison of their basic parameters and limiting factors. Another part of the work is dedicated to progressive methods of construction such as microtubes and solution using the hanging cables, which due to the efficiency of construction, rapidity, economic and facilitate implementation. In conclusion the theoretical part there is issues of measurement. It describes a Optical Loss Test Set, OTDR method and method of measuring dispersion. Increasing demands on the capacity of the transmission paths, and their quality are caused of monitoring optical access networks, which can evaluate the failure on a route, target problems and inform service. The practical part compares EPON and GPON. In program OptiSystem was created model which these technologies are evaluated in terms of performance parameters, noise, jitter and eye diagram quality. The common feature of technology is transmission TDM frames, where EPON uses Ethernet and GPON technologies ATM. The outcome of simulation don´t show which technology is better, but result shows the conditions of the proposal of these technologies. At the end of work there are created several models for solving the optical access network with pricing per user. The most developed technology is FTTB in urban areas, when transmission in last mile uses copper circuit. This solution causing a rapid return on investment. Other technologies such as point-to-point FTTH or PON are implemented as individual proposals. Each of these solutions has advantages and disadvantages, so each project is unique and the solution is dependent on the project site and the requirements of customers.
20
Alexa, Jan. "Využití polarizace světla při filtraci optického signálu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376944.
Full textAbstract:
This master thesis deals with the possibility of separation of useful signal from noise using polarization of laser radiation. This thesis is structured into 5 thematic units. The first unit is focused on laser radiation and its properties. The second part contains a deeper focus on the polarization of radiation, its description and the possibilities of measuring the polarization states. The third part of the thesis is devoted to the design of the measuring chains and identification of used elements. Chapter four contains measurement of status of the polarization and its results. The last chapter analyzes particular measuring chains outputs according to their spectral characteristics.
21
Pěček, Dominik. "Určení rozložení teploty oblouku v reálném jističi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317074.
Full textAbstract:
This master thesis deals with determination of temperature field in a real circuit breaker. This issue is solved by analysis of measured emission spectra at selected points of the circuit breaker. Spectral line ratios and Boltzmann plot are used for calculation of temperature. These methods are based on elemental analysis of plasma. The main result is finding significant changing of chemical composition of plasma beyond determination of temperature field.
22
Tejkal, Vladimír. "Návrh optické přístupové sítě FTTx." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218198.
Full textAbstract:
The main goal of this diploma thesis was to implement the proposal of optical access networks in the selected location. Introduce is focused on the physical layer of network. This includes optical fibers, optical cables, connectors, optical splitters, and more. According to the place of termination of optical fiber will be studied best FTTx connections. According to network topology distinguished point to point and point to multipoint network. Networks points to point are also known as an active optical network and for each user are restricted to a separate fiber. Point to multipoint networks known as passive optical network. In terms of the PON is defined by many standards. For a selected location will be choice the most appropriate solution. Finally, the measurement will be made and will be considered for monitoring the route. Before the design of optical access networks, I made an illustrative simulation in program OptSim. Performed simulations helps to study the transmission characters of optical networks, depending on the physical architecture. In general, for the design of high-capabilities networks for large companies will be more appropriate active topology that provides due wavelength multiplexes high transmission capacity. To join in the urban areas with a large number of separate houses, it is more appropriate use of passive topology. For the design of optical networks has been selected location with multiple housing buildings. The end customer is not given the requirement for high data transfer rates as large companies. For the proposal was selected FTTB networks which is suitable because of lower costs. The second variant of the proposal was a passive optical network according to standard GPON. This standard was chosen because of the high splitting ratio. For both solutions was developed the entire proposal by ITU-T with a detailed drawing documentation. In the selected area was conducted measuring the optical networks in order to verify the possibility of extension actual solutions. For a sample issue of measurements, I made several measurements using optical reflectometer over an optical splitter in order to prove the need for measurements during construction. FTTH networks gaining in popularity more and more, but price is the limiting factor.
23
Reichert, Pavel. "Návrh sítě FTTB." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217513.
Full textAbstract:
The purpose of this master’s thesis is to explain the issues of the FTTx network design. The main idea of this work is to describe to readers the methods of the designing the optical access networks. Especially we will speak about the building technologies and different topologies used in a practice. The different technologies of optical access networks’ building and various parameters, which are necessary to take into account in the designing of these networks, will be introduced. In the theoretical part, methods of measurement, which are like the needed part of each optical access networks’ building, will be described. Two purposes of the FTTB networks with all proprieties will be made and offered. One purpose will be solved by Point to Point topology and the second purpose will be solved by Point to Multipoint topology. Following the confrontation one of these purposes will be chosen and realized. By ITU recommendation, measurements will be performed on the built optical trace. The final protocols will be elaborated from these measurements. The built trace with all final reports will be prepared for assignment to the subscriber.
24
Fulová, Silvia. "Stanovení nejistoty měření optického měřicí stroje pomocí laserinterferometru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443250.
Full textAbstract:
This final thesis is dealing with stating uncertainty of optical measuring device Micro-Vu Sol 311, which is located at Faculty of mechanical engineering in Brno. Overview of coordinate measuring machines (CMM for short) and analyzed present status of optical CMM is in summation. This part also includes basic metrology concepts and methodology of determination of uncertainty of measuring instrument. Content of following parts of thesis is detailed description of Micro-Vu SOL 311 machine and etalons that were used in determination of enhanced uncertainty of measurement such as gage blocks, laser interferometer and glass scale. Last part of this thesis includes summary of achieved results and recommendations for practice.
25
Horváth, Tomáš. "Optimalizace služeb v optických přístupových sítích FTTx." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-320777.
Full textAbstract:
This thesis deals with an optimization of Triple play services and security in optical access networks. The first chapter provides theory basics which are necessary for results evaluation. The second chapter describes optical access networks with their parameters such as transmission speed, split ratio, line code, bit error rate etc. defined by ITU. Next chapter summaries the current state in optical networks construction field according to the European Union developing plan. The practical part of this thesis is divided into several subchapters. The significant part of the thesis is dedicated to the security of passive optical networks and design of proper security model for current networks. For this purpose, the unique parameter time propagation Tprop, with the novel security model was developed. Next part of the thesis provides an analysis of control traffic and data traffic in the gigabit passive optical networks. For a novel algorithm in activation process in gigabit passive optical networks the measurement results were used. The novel algorithm decreases the total time needed for this process. The last but one subchapter deals with an ILP model for Triple Play services. The last subchapter contains the own implementation of the transmission converge layer in VPIphotonics simulation tool.
26
Navrátil, Rudolf. "Software pro prezentaci multimediálních stimulů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220840.
Full textAbstract:
This work deals with the affects of multimedia stimuli on the human body, their processing by senses, the possibility of presentation of the stimuli with emphasis on the possibility of measuring the impact of their effect on biological signals using external measuring station. It describes the design and implementation of the application, allowing presentation of the mentioned stimuli and their synchronization with external measuring system Biopac.
27
Zagorská, Kateřina. "Návrh a realizace testovací aplikace měření rozměrů optickým senzorem a robotickým ramenem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442816.
Full textAbstract:
This diploma thesis deals with creation of a measuring application using optical sensor and robotic arm in the RobotStudio software. The literature review of the thesis describes the field of optical measuring and calibration. Furthermore, the thesis includes the process of creating a measuring application and outlining issue of calibration of individual parts. The work is supplemented by a demonstration of repeatability measurements and a description of possible errors that may occur if the robot is set incorrectly.
28
Palásek, Vítězslav. "Souřadnicové měřicí stroje (CMM) s optickým snímacím systémem a optické CMM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228384.
Full textAbstract:
This graduation work is about co-ordinal measuring machines (CMM) with optical reader system and optical CMM. In accordance with submission and in terms of survival well known contactless systems the direction is to make methodology objective classification of rating with granting summary of these systems. The first part contains optical principles for visual scanner in CMM and optical CMM. Ist is described there principle of contactless obtaining steric digital version of measured object with using laser and optical facilities. The second part contains brief makes survey of these contactless systems and their component which are used for co-ordinal measuring. The survey is devided into optical readers, which are put on CMM brake or on mobile measuring brake and on optical CMM, which localize position measuring/sensing head in the space or they read measured object from specific distance – fotogrammetric. Characteristic of offered systems and chart with technical data are mentioned with each maker. The third and fourth part is about submission methodology for objective choice suitable sort of reader, optical CMM in target of characteristic reader system quality. And from this methodology is given the choice of suitable exponent stationary measuring machine with contact and contactless way of reading and their comparison.
29
Balon, Jiří. "Měřící metody klíčových parametrů v optických sítích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218247.
Full textAbstract:
The main goal of the master’s thesis was to familiarize with optical networks dilemma and its measuring during fabrication. The whole thesis is divided into several parts where the first part deals with optic fiber dilemma. It describes its kinds, properties and also suggests a basic principle of optic signal dispersion using these fibers. It describes also optical network FTTx architecture (Fiber To The x). The second part of the thesis focuses on methods of measuring key parameters of optical networks. Is brings out the methods of measuring optical loss and dispersive influences. The last and final part in focused on creating a methodical manual for measuring these networks during its fabrication and verifying measuring methods stated in the theoretical part inside a real network. Measuring was implemented on an optical network of Masaryk University in Brno.
30
Smrž, Martin. "Měření vlastností optických detektorů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221373.
Full textAbstract:
Purpose of this master thesis is get acquainted with laboratory components designated for measurment of optical detectors, study principials of function of each detector and learn how to work with measuring machines. On the base of this knowledge will be measured spectral, frequency and dynamic characteristics of each detectors. The outcome of the thesis will draft of the laboratory exercise for subject Microscopy imaging technique teaching at the first semestr of follow-up masters studies of Biomedical engineering and bioinformatics at DBME, FEEC, Brno University of technology.
31
Vaníček, Jakub. "Měření relativní variance optické intenzity." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219091.
Full textAbstract:
The intention of this master‘s thesis is the measurment of relative variance of optical intensity. In the first place, I have been studied Kolmogorov cascade theory of turbulence and relative variance of optical intensity . In addition, I have been deal with turbulent cells, Gaussian beam, Top Hat beam and influence of the atmospheric turbulences on the intensity profile of the laser beam. Lastly I have been measured determine influence of the atmospheric turbulences on the intensity profile of the laser beam and I have been calculated relative variance of optical intensity. I have suggested the optimum beam profile in the turbulent atmosphere from acquired data.
32
Černek, Ondrej. "Korelativní měření katodoluminiscence za použití technik SEM a SPM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443222.
Full textAbstract:
The diploma thesis deals with the combined use of SEM and SPM techniques using optical fiber, which is used to collect the cathodoluminescent signal in close proximity to the sample. The thesis also includes a research section, which lists description of CPEM technique, the techniques used to modify the optical fiber, theoretical introduction to cathodoluminescence and techniques used to measure it. The practical part discusses the obtained measurement results and the problems that occurred in the process of modification of the optical fiber, its use as an SPM probe and in the measurement of cathodoluminescence active materials.
33
Opravil, Jan. "Systém pro optické měření." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219684.
Full textAbstract:
This diploma thesis deals with the creation and testing of optical measurement system. There are basic parts of computer vision. Some ways of image preprocessing and templates matching are discussed. Everything is directed to a particular practical task. Selected methods for templates matching are the Correlation Method, the Classical and Hybrid Hausdorff Distance, Radial and Circular Sampling Space. These methods are programmed in C++ and they are compared with function for searching templates from specific library.
34
Bednář, Tomáš. "Měření výšky hladiny pomocí OVS." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219315.
Full textAbstract:
The subject of this master‘s thesis is the issue of design of fiber optic sensor for min/max and continuous measurement of liquid level, which could be used for laboratory measurement of optoelectronics. The thesis is divided into the three parts, the first part deals with methods of retrieval level measurement using fiber optic sensors. The second part is made of plant design of optical fiber sensors, it is shown the implementation of measuring devices for liquid level measurement and measured transfer characteristics of the sensors developed. The last part is proposed for laboratory typing tasks using established preparation for teaching in the subject Optoelectronic sensors.
35
Schmidtová, Markéta. "Optické měření deformací přírubových spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444269.
Full textAbstract:
The diploma thesis addresses the topic of optical measurements of flange joints during tightening and thermal loading. Commercially available optical systems with decreasing invasiveness were compared in opportunity which offer to an industrial environment. Various conditions are evaluated in 3D (scanning, DIC) as well as in 2D (DIC). The data for evaluation of sensitivity and system accuracy together with the evaluation of the data range were obtained by the measurement. Data evaluation showed the same accuracy for 2D and 3D system and the possibility of quality inspection of the joint by assessing the inspection dimensions in operation.
36
Souček, Ondřej. "Optické scannery - měření kinematických bodů zavěšení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229118.
Full textAbstract:
The master´s thesis deals with creating a usable methodology for measuring the position of kinematic points McPherson suspension using optical scanners available on ÚADI. The answer lies in comparing the measurement results obtained using the scanners ATOS and TRITOP with regard to the different measurement methods. Using analytic geometry and the software ADAMS are fixed characteristics of the suspension, they are compared with values measured on the geometry. Finally, it evaluated the accuracy of measurement methods.
37
Chleboun, Jan. "Metodika měření optické páteřní sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218546.
Full textAbstract:
There are methods to extend the transmission channel of optical transmission medium thanks to the development of telecommunications and informatics. Multiplex is a grouping of signals into a single transmission path and wave-division multiplexing is the best reason of use of the maximum fiber optic transmission capacity. The subject of this work is to determine whether a particular transmission path is suitable for such an extension of their capacity and how much. The answer is obtained by measuring the attenuation, the chromatic dispersion and the polarization mode dispersion, whose values are strictly limited and which determine next steps in the expansion of the transmission path, which is comprised by optical medium. Measurement methods determine the nature of the measured route and its current transmission capacities. Draft of the measurement methodology, which ensures the correct procedures during a possible transition to higher speeds is the output of this work. Thanks to the acquired characteristics of the BAPS (the Brno Academic Computer Network), the bit rate 40 Gb/s can be provided on this part of the network under the conditions of the introduction of certain countermeasures, particularly the exchange of a connectors on the measured optical lines. As for the back reflection lines in excess of the standard recommendation and pre-emptively on the lines with values with still agree with the return loss. Countermeasure for limiting of the chromatic and the polarization mode dispersion are do not need to stand in the way of a planned transition to a higher rate of the BAPS.
38
Drexler, Petr. "METODY MĚŘENÍ ULTRAKRÁTKÝCH NEPERIODICKÝCH ELEKTROMAGNETICKÝCH IMPULSŮ." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2007. http://www.nusl.cz/ntk/nusl-233412.
Full textAbstract:
This thesis deals with the aspects of methods for pulsed high-level EM quantities measurement. Methods for current and voltage measurement in pulsed power generator and power measurement in pulse microwave generator are discussed. New approaches to single-shot measurement methods application are proposed. The theoretical analysis of suitable sensor designs is performed. The magneto-optic measurement method has been experimentally realized. On the basis of experimental results a fiber-optic current sensor has been designed and theoretically analyzed. For identification and measurement of the free-space electromagnetic pulse a combined calorimetric sensor has been designed and built.
39
Karásek, David. "Měření akustických polí bezkontaktními optickými metodami." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400677.
Full textAbstract:
The purpose of this paper is to assemble measurement chain dedicated to contactless measuring of acoustic fields emitted by test sources and to validate its results. At first author discusses possible optic methods which can be used to measure acoustic fields, then he talks about theoretical foundations which are needed to measure data and to reconstruct final data. The last two chapters are dedicated to cover basics about created program and to analyse various aspects which influence measured and reconstructed data. Created measurement chain is fully functional, at the end of this thesis are proposed some ways of improving
40
Kučera, Zdeněk. "Měření parametrů optických spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220660.
Full textAbstract:
Communication via fiber optical cable (links) is the latest advancement of the transmission media currently used for data transmission. Despite initial problems, using of this medium in recent years has greatly expanded due to their indisputable advantages. Optical cable is a great combination of reliability and security of data transfer. Its constantly improving transmission parameters contribute to the high speeds in the long-distance transmission of data. In the theoretical part of this work some kinds of optical cables are mentioned, also the most important parameters and the most widely used methods of measurement of these cables. Apart from that other methods of joining optical cables and the most used types of optical cables are also mentioned. The values of the decline and reflection, which are led into the device after connecting these parts into the optical lines. The device using the measuring method of the reverse reflection is also described in this thesis altogether with its most important parts and the way of the display of the measured track on the graphic image of the device. The problematics of identification and decline dead zone and the factors influencing the lenght of dead zone – the ability to identify two independent events on the link patchcord of the variable lenght, is also described in details in this thesis. In the practical part a series of measurements and evaluation (numerical and graphical) of the measured values of decline lenghts and identificating dead zones of the OTDR device will be carried out.
41
Šeptun, Roman. "Systém pro optické měření otoku končetiny." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316838.
Full textAbstract:
This thesis deals with methods of edema measuring. In my work, I designed hardware and software solutions for a device reconstructing surface of the limb part. Purpose of my work is evaluating a discussing possibilities of this device. For making 3D reconstruction of scene from 2D images I chose reconstruction method Structure from motion. For acquisition of 2D images a device controlled by Arduino platform was constructed, the whole device is realized in program language Matlab. In the end of the thesis is described, how to improve the device for using in real conditions.
42
Čmiel, Vratislav. "Optické měření elektromechanických projevů srdečních buněk." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-261217.
Full textAbstract:
Dissertation is focused on the application of optical measurement methods using techniques of optical microscopy and fluorescence microscopy in measurements of electromechanical characteristics of isolated cardiac cells and clusters of differentiated cardiomyocytes. The first proposed method uses a practical combination of fluorescence microscopy equipped with fluorescent fast and high-resolution camera and atomic force microscopy for simultaneous measurement of calcium transients and contraction of cardiomyocyte clusters. The signals obtained undergoes filtration, processing and analysis. Result function parameters obtained by analyzing signals after application of caffeine are evaluated by comparison with functional parameters obtained during the control measurement. The second proposed method is applied to the cardiomyocyte clusters for the purpose of cardiomyocyte contraction signals measurement. The signals obtained by optical methods are analyzed and compared with the reference signal obtained using atomic force microscopy. Optical measurement method of cell contractins based on detection of cell ends using adjusting of microscopy images by re-sharpening and fluorescence method for cardiomyocyte contractions measurements were designed to increase realiability in simultaneous measurement of cell contractions simultaneously with calcium transients in isolated cardiomyocytes experiments.
43
Dugáček, Ján. "Automatizované optické měření kontaktního úhlu kapky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377330.
Full textAbstract:
Measurement of surface tension of solids usually requires manual processing of photographs of droplets of liquids with known properties on the measured material's surface, during which the contact angle is manually determined. The objective of this work is to implement an algorithm that can determine these contact angles from photographs and does not require the photographs to be made under specific light conditions. The implementation cannot depend on paid libraries and must be simple to incorporate into existing software.
44
Hanák, Pavel. "Měření a zpracování elektrogramů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-374605.
Full textAbstract:
The aim of the study was focused on problem of electrograms recording from alive tissue. Study of electrograms recording was extended with noise analysis and its elimination. Elimination of noise and disturption was made in program Matlab; lowpass filtration and wavelet transformation was used. Application for electrograms analysis was developed in latter part of this work.
45
Vrábel, Miroslav. "Měření parametrů laserových svazků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219097.
Full textAbstract:
his paper discusses the characteristics of laser radiation. Introduces the theory and in quite a description of the laser beam. To this end, experiments were compiled to measure the geometric and performance parameters, polarization and coherence. Emphasis is placed on the interdependence of the various parameters of laser radiation
46
Veselka, Michal. "Měření a analýza kinematiky zadního víceprvkového zavěšení." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230580.
Full textAbstract:
This diploma thesis deals with the measurement of kinematic points of rear multilink suspension using 3D optical scanners TRITOP and ATOS and developing a measurement methodology of similar types of suspension with these scanners. Subsequently, kinematic features of this suspension are analyzed using the multibody system MSC.ADAMS / Car.
47
Jelínek, Michal. "Metoda pro zvýšení přesnosti měření optického frekvenčního spektra laditelnými optickými filtry." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242071.
Full textAbstract:
The thesis deals with the method for the improvement of the measurement accuracy in the optical frequency spectra measurements based on tunable optical filters. The thesis starts with the selection of the proper optical filter that is suitable for accurate light spectrum measurement. The selected filter was then used for the design and realization of the measurement system for the inspection of the fibre Bragg gratings. The system incorporates a reference block for the compensation of environmental influences, an interferometric verification subsystem and a PC - based control software implemented in LabView. The preliminary experimental verification of the measurement principle and the measurement system functionality were carried out on a testing rig with a specially prepared concrete console in the UJV Řež. Advanced tests were conducted on nuclear power plant’s containment shape deformation measurement in Temelin.
48
Vadkerti, Kristián. "Optické metody měření kontrakce izolované srdeční buňky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218725.
Full textAbstract:
Diploma work is focused on basic characteristics of optical measuring methods commonly used to rate contactions of isolated heart cell and describes basic actions, that are connected with it. A camera record made by a microscope served as basis for optical measuring methods of contractions chosen by us, with using appropriate method elaborating and analysis of pictures used for detection of important part of cell structure. The suggested user application built-up in Matlab environment allows analysis and interpretation of contractional functions in two methodical ways.
49
Martinec, Jiří. "Měření a analýza kinematických vlastností zavěšení formule Student Dragon 1." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230501.
Full textAbstract:
The Diploma Thesis is focused on influence of manufacturing inaccuracy on suspension kinematics of Formula Student car Dragon 1. The real kinematics points were measured with 3D optical scanners and then the real vehicle kinematics was analysed. The gained data were compared with the ideal suspension points. For these purposes was used multibody system software MSC ADAMS.
50
Vítová, Hana. "Neinvazivní měření glukózy v krvi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219498.
Full textAbstract:
Goal of my master´s thesis is examination of non-invasive blood glucose measurement methods, and designing of device for non-invasive blood glucose reading. The introductory chapter of thesis contains description of know different methods for blood glucose measurement, mainly Near Infra-Red region (NIR) measurement with spectroscopy methods. This project describes pathology of Diabetes Mellitus, specifies how it is divided, and looks also on human metabolism. The theoretical part contains exploration of blood glucose measurement methods. Thesis continues with system scheme design for non/invasive glucose measurement device, based on present knowledge. Major principle of device is measuring with Infra-Red laser, bifurcate optic fiber and photodiode. Design of printed circuit board is also present. Document contains also designs of software diagrams for calibration and processing program written in C# language. Communication between device and computer is made via USB. Microcontroller with C language program is part of designed device. It is used to send measured values into PC and also receives data from computer. This data determines blood glucose concentration and their thresholds.