To see the other types of publications on this topic, follow the link: Optimization parameters.

Dissertations / Theses on the topic 'Optimization parameters'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Optimization parameters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Markgren, Hanna. "Fatigue analysis - system parameters optimization." Thesis, Umeå universitet, Institutionen för fysik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-151755.

Full text
Abstract:
For a mechanical system exposed to repeated cyclic loads fatigue is one of the most common reasons for the system to fail. However fatigue failure calculations are not that well developed. Often when fatigue calculations are made they are done with standard loads and simplified cases. The fatigue life is the time from start of use until the system fails due to fatigue and there does exist some building blocks to calculate the fatigue life. The aim for this project was to put these building blocks together in a workflow that ca be used for calculations of the fatigue life. The workflow was buil
APA, Harvard, Vancouver, ISO, and other styles
2

Samek, Michal. "Optimization of Aircraft Tracker Parameters." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2015. http://www.nusl.cz/ntk/nusl-234937.

Full text
Abstract:
Diplomová práce se zabývá optimalizací systému pro sledování letadel, využívaného pro řízení letového provozu. Je popsána metodika vyhodnocování přesnosti sledovacího systému a přehled relevantních algoritmů pro sledování objektů. Dále jsou navrženy tři přístupy k řešení problému. První se pokouší identifikovat parametry filtrovacích algoritmů pomocí algoritmu Expectation-Maximisation, implementací metody maximální věrohodnosti. Druhý přístup je založen na prostých odhadech parametrů normálního rozložení z naměřených a referenčních dat. Nakonec je zkoumána možnost řešení pomocí optimalizačního
APA, Harvard, Vancouver, ISO, and other styles
3

Johansson, Christopher. "Optimization of wall parameters using CFD." Thesis, KTH, Aerodynamik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-159875.

Full text
Abstract:
Computational Fluid Dynamics (CFD) is commonly used to calculate the pressure drop in systems with internal ow. To get accurate results the physics of the ow must be well dened together with the right material parameters of the considered geometry. The mate- rial parameter considered in this report is the wall roughness, or sand-grain roughness, and during the thesis work it has been investigated how dierent wall roughnesses aects the pressure drop. It has also been investigated how to set up a CFD simulation to accurately calculate the pressure drop. When setting up a simulation, a good mesh
APA, Harvard, Vancouver, ISO, and other styles
4

Jain, Ruchi V. "Optimization of energy parameters in buildings." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40445.

Full text
Abstract:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.<br>Includes bibliographical references (p. 34).<br>When designing buildings, energy analysis is typically done after construction has been completed, but making the design decisions while keeping energy efficiency in mind, is one way to make energy-efficient buildings. The conscious design of building parameters could decrease or completely eliminate the need for Heating, Ventilation and Air Conditioning systems, and thus, optimizing building parameters could help conserve a great amount of energy. Thi
APA, Harvard, Vancouver, ISO, and other styles
5

Weitzel, T. Timothy. "Optimization of sweet sorghum processing parameters." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/80180.

Full text
Abstract:
Production of fuel ethanol from renewable biomass sources has gained popularity in recent years. Sweet sorghum is one of the crops identified as an efficient producer of the sugars needed for ethanol production. The juice in the sweet sorghum pith contains the greatest proportion of nonstructural carbohydrates, the presumed fermentable material. Sugar cane milling procedures have previously been used to extract the juices from the sweet sorghum plant material. The research reported herein relates to a new method of juice extraction expected to provide higher juice expression efficiencies t
APA, Harvard, Vancouver, ISO, and other styles
6

Titova, Polina. "Optimization of statistical parameters of Eberhard inequality." Thesis, Linnéuniversitetet, Institutionen för matematik (MA), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-39641.

Full text
Abstract:
This work is devoted to mathematical modeling of the parameters of the Eberhard inequality using optimization techniques. One of the main purposes of this study is to consider the more general case when the detectors have different efficiencies. In this paper we consider the optimization of parameters for the Eberhard inequality using coefficient of variation taking into account possible errors in the setup of angles during the experiment.
APA, Harvard, Vancouver, ISO, and other styles
7

Andersson, Axel. "Optimized Tuning of Parameters for HVDC Dynamic Performance Studies." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-193702.

Full text
Abstract:
HVDC (High Voltage Direct Current) is used all over the world for transmission of electric power due to lower losses compared to traditional HVAC (High Voltage Alternating Current). However, the procedure of converting AC into DC puts great demand on the control system of the converter stations. These control systems need to be tuned properly to give the HVDC system the correct dynamics to handle variations in the network load and other disturbances. In this thesis, it was investigated if optimization algorithms can be used for tuning of the control parameters. Focus was on three parts of the
APA, Harvard, Vancouver, ISO, and other styles
8

Gustavsson, Jonas. "Automated Performance Optimization of GSM/EDGE Network Parameters." Thesis, Linköping University, Linköping University, Communication Systems, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-52565.

Full text
Abstract:
<p>The GSM network technology has been developed and improved during several years which have led to an increased complexity. The complexity results in more network parameters and together with different scenarios and situations they form a complex set of configurations. The definition of the network parameters is generally a manual process using static values during test execution. This practice can be costly, difficult and laborious and as the network complexity continues to increase, this problem will continue to grow.This thesis presents an implementation of an automated performance optimi
APA, Harvard, Vancouver, ISO, and other styles
9

Fu, Stefan Xueyan. "Finding Optimal Jetting Waveform Parameters with Bayesian Optimization." Thesis, KTH, Optimeringslära och systemteori, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231374.

Full text
Abstract:
Jet printing is a method in surface mount technology (SMT) in which small volumes of solder paste or other electronic materials are applied to printed circuit boards (PCBs). The solder paste is shot onto the boards by a piston powered by a piezoelectric stack. The characteristics of jetted results can be controlled by a number of factors, one of which is the waveform of the piezo actuation voltage signal. While in theory any waveform is possible, in practice, the signal is defined by seven parameters for the specific technology studied here. The optimization problem of finding the optimal para
APA, Harvard, Vancouver, ISO, and other styles
10

Van, Eeden Madel. "Determining appropriate parameters for optimization of biocontrol success." Thesis, University of Pretoria, 2013. http://hdl.handle.net/2263/30784.

Full text
Abstract:
Increased economic and environmental pressures have led to the requirement for a more accurate and safe crop protection method. Although Avogreen® (Bacillus subtilis) offers an environmental friendly alternative to the use of pesticides; few growers have opted for this approach mainly due to uncertainty regarding the success of the biocontrol program. Biocontrol success may be influenced by biological, ecological, scientific, economic, political, social, legal and marketing factors. Investigations showed that delivery of the antagonist to the plant surface was equally effective employin
APA, Harvard, Vancouver, ISO, and other styles
11

Eren, Tuna. "Real-time-optimization Of Drilling Parameters During Drilling Operations." Phd thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611558/index.pdf.

Full text
Abstract:
Real-time optimization of drilling parameters during drilling operations aims to optimize weight on bit, bit rotation speed for obtaining maximum drilling rate as well as minimizing the drilling cost. The process is considered to be formation specific. A statistical method such as multiple linear regression technique has been used for the drilling optimization. An extensive literature survey on drilling optimization was conducted for this research study. A model is developed for this purpose using actual field data collected through modern well monitoring and data recording systems, which pred
APA, Harvard, Vancouver, ISO, and other styles
12

Bond, Jeffery. "The optimization of carbon nanotube growth parameters for photonics." Thesis, University of Ottawa (Canada), 2007. http://hdl.handle.net/10393/27447.

Full text
Abstract:
Suspended carbon nanotubes are of particular interest for optical and optoelectronic applications because of their superior optical properties. The purpose of this work is to explore sample preparation and chemical vapour deposition (CVD) process parameters to develop methods of fabricating large quantities of freely suspended single walled carbon nanotubes (SWNTs). Parameters including CVD hydrogen soak temperature, growth temperature, choice of catalyst, gas flow rate, and gas composition were examined. Various techniques were tested for their practical capability to suspend SWNTs. A simple
APA, Harvard, Vancouver, ISO, and other styles
13

Nyström, Birgitha. "Natural fiber composites : optimization of microstructure and processing parameters." Licentiate thesis, Luleå tekniska universitet, Materialvetenskap, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17370.

Full text
Abstract:
Natural fiber composites, (NFC) are defined in this work as a group of materials where at least the fibers originates from renewable and CO2 neutral resources. NFC consists of a polymer matrix and a natural fiber. The fibers which originate from wood or plants can replace non-renewable fibers or fillers or simply replace part of the plastic. If plastics from renewable resources are used, NFC is a 100% renewable material. Even though there is very large variety of fibers, matrices and manufacturing techniques used to produce NFC, these materials are often separated as its own material class. Ho
APA, Harvard, Vancouver, ISO, and other styles
14

Monder, Dayadeep S. "Real-Time Optimization of gasoline blending with uncertain parameters." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ60472.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Powell, B. Michael. "Surface finish optimization by modification of milling cutter parameters." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ62268.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Nyström, Birgitha. "Natural fiber composites : optimization of microstructure and processing parameters /." Luleå : Luleå tekniska universitet/Tillämpad fysik, maskin- och materialteknik/Polymerteknik, 2007. http://epubl.ltu.se/1402-1757/2007/31/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Golovidov, Oleg. "Variable-Complexity Approximations for Aerodynamic Parameters in Hsct Optimization." Thesis, Virginia Tech, 1997. http://hdl.handle.net/10919/36789.

Full text
Abstract:
A procedure for generating and using polynomial approximations to the range or to the cruise drag components in terms of 29 design variables for the High Speed Civil Transport (HSCT) configuration and performance design is presented. Response surface model methodology is used to fit quadratic polynomials to data gathered from a series of numerical analyses of different HSCT designs. Several techniques are employed to minimize the number of required analyses and to maintain accuracy. Approximate analysis techniques are used to find regions of the design space where reasonable HSCT designs
APA, Harvard, Vancouver, ISO, and other styles
18

Tulloss, Jr Robert Stuart. "Optimization of Geometric Parameters for a Deployable Space Structure." Thesis, Virginia Tech, 2021. http://hdl.handle.net/10919/104873.

Full text
Abstract:
Deployable structures are used for many different spacecraft applications like solar arrays, antennas, and booms. They allow spacecraft with large structural components to comply with the volume restrictions of launch platforms. This research optimizes the shape and size of these structural components with both the stowed and deployed configurations in mind. HEEDS, a commercial optimization software, and ABAQUS, a commercial finite element analysis software, are used to evaluate and alter the structure using a single simulation. This makes the design process more efficient than running many di
APA, Harvard, Vancouver, ISO, and other styles
19

Sorrell, Toni P. "TUNING OPTIMIZATION SOFTWARE PARAMETERS FOR MIXED INTEGER PROGRAMMING PROBLEMS." VCU Scholars Compass, 2017. http://scholarscompass.vcu.edu/etd/5035.

Full text
Abstract:
The tuning of optimization software is of key interest to researchers solving mixed integer programming (MIP) problems. The efficiency of the optimization software can be greatly impacted by the solver’s parameter settings and the structure of the MIP. A designed experiment approach is used to fit a statistical model that would suggest settings of the parameters that provided the largest reduction in the primal integral metric. Tuning exemplars of six and 59 factors (parameters) of optimization software, experimentation takes place on three classes of MIPs: survivable fixed telecommunication
APA, Harvard, Vancouver, ISO, and other styles
20

Boggess, Chadwick D. "Optimization of Growth Parameters for Algal Regrowth Potential Experiments." DigitalCommons@CalPoly, 2014. https://digitalcommons.calpoly.edu/theses/1234.

Full text
Abstract:
Water cost is one of the key deterrents in making algal biofuels a feasible alternative to traditional petroleum fuels. Research into recycling of algal media was conducted in a laboratory setting at the California Polytechnic State University in San Luis Obispo. A growth assay was created to allow for algal cultures, specifically Ward’s Chlorella sp., to proliferate in sealed culture vessels. Bold’s Basal Medium (BBM) was selected as the media due to its extensive use with freshwater algal strains. However, this medium can limit algal growth through nutrient limitation and it became nece
APA, Harvard, Vancouver, ISO, and other styles
21

Torralbo, Pilar Vicaria. "Optimized Automatic Calibration Tool for Flight Test Analogue Parameters." International Foundation for Telemetering, 2015. http://hdl.handle.net/10150/596389.

Full text
Abstract:
ITC/USA 2015 Conference Proceedings / The Fifty-First Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2015 / Bally's Hotel & Convention Center, Las Vegas, NV<br>The calibration processes consume a big quantity of resources: equipment and people, time and cost. As the number of calibration points increase the resources increase in the same extent. This automatic tool, aimed to reduce these resources, has been designed for commanding, managing and analyzing in real time a large number of acquired data points coming from the specimen under calibration and th
APA, Harvard, Vancouver, ISO, and other styles
22

Falk, Jennie. "Robust Optimization for Uncertain Radiobiological Parameters in Inverse Dose Planning." Thesis, KTH, Optimeringslära och systemteori, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-160135.

Full text
Abstract:
Cancer is a common cause of death worldwide with radiotherapy as one of the most used treatments. Radiation treatment plans are normally optimized using constraints on the maximum dose to tumours and minimum dose to surrounding healthy structures. It has been suggested that utilizing biological models in the radiation plan optimization process could improve outcome significantly. Such treatment plans depend not only on the accuracy of the biological models, describing the dose response relations of different tumours and other structures, but also on the accuracy of tissue specific parameters i
APA, Harvard, Vancouver, ISO, and other styles
23

Tucale, Hermenegildo Luís Pinto. "Hansen solubility parameters: formulation optimization." Master's thesis, 2021. http://hdl.handle.net/10773/33573.

Full text
Abstract:
Hansen solubility parameters (HSP) are cohesion energy parameters. They are a scientific approach that helps to understand the compatibility and similarity of materials. The three parameters 𝛿𝐷 (dispersion parameter), 𝛿𝑃 (polar parameter) and 𝛿𝐻 (hydrogen bonding parameter) have been used by the paint and coatings industries for over fifty years to help solve the many problems in selecting materials for formulations, faster replacement of solvents, resins, pigments, mats and additives. In this work, more than 30 experimental tests were carried out to optimize methods and procedures for the cha
APA, Harvard, Vancouver, ISO, and other styles
24

Hsu, Chun-Yuan, and 許峻源. "Design optimization of milling parameters." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/h9yb74.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>機械工程系<br>106<br>Surface roughness is one of the most important indicators of modern precision machining. The influence of surrounding, machine and processing parameters will cause the different results of workpiece surface, and then it also affects the efficiency of subsequent machine parts. Face milling with CNC milling machine is used to research the surface roughness of medium carbon chromium molybdenum alloy steel(SCM440) for this study. This time the tungsten steel(UET-1204)end milling process, and the Taguchi experiments is also used to perform workpiece surface milli
APA, Harvard, Vancouver, ISO, and other styles
25

Wu, Pei-Rong, and 吳佩蓉. "Fuel Cell Optimization Parameters Estimate by Particle Swarm Optimization." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/05414094875121472401.

Full text
Abstract:
碩士<br>逢甲大學<br>資訊電機工程碩士在職專班<br>99<br>This thesis to propose the concept of environmental protection enhancing, countries in the world actively developing of green renewable energy to reduce carbon dioxide concentration. The characteristics of intermittent renewable energy sources required to ensure effective energy storage system, to achieve higher economic efficiency. Due to fuel cell is contain storage function as well as energy converters, that make fuel cell development greatly improved. The thesis will not only introduce some swarm intelligence of the algorithm and description, but also
APA, Harvard, Vancouver, ISO, and other styles
26

TSAI, YUNG-HUI, and 蔡永暉. "Stealth Dicing Parameters Optimization of Wafers." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/47337578771501469733.

Full text
Abstract:
碩士<br>國立中興大學<br>物理學系所<br>105<br>The era of the personal computer has been changed into the mobile device going with the thinner and smaller size, cheaper price, and the function of high-performance computing. In the case of being able to satisfy the function of low-power consumption and high-density transistor arrays; this, therefore, brings more challenges for wafer dicing process. In this study, we applied stealth dicing technical to overcome the challenges and increased the yields to thin wafer with 16nm technology nodes and beyond. We used Taguchi method in variety parameter combinations t
APA, Harvard, Vancouver, ISO, and other styles
27

Chu, Feng-Hung, and 朱峯宏. "Parameters Optimization of Carrier Tape Process." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/84117699180715226048.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>電機工程系博碩士班<br>103<br>A wide variety of electronic components, protection during transport or use of is the use of carrier tape. Use tape carrier can be divided into two kinds of active components and passive components, the main use is in the packaging element, how to make element being the best protection lies in the design and manufacture of the carrier tape, allowing optimal space design element hosted, the element in the production and transportation can be the best protection. How to shorten the process test time, how to improve process yield, in order to meet customer
APA, Harvard, Vancouver, ISO, and other styles
28

Zhuo, Ye-Qi, and 卓也琦. "Optimization of Hadoop System Configuration Parameters." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/29088821473196350661.

Full text
Abstract:
碩士<br>國立臺灣大學<br>資訊工程學研究所<br>103<br>Hadoop system is very popular recent year, which is a software framework with distributed processing large-scale data-sets by using a cluster of machines with MapReduce programming model. However, there are still two essential challenges for Hadoop users to manage the Hadoop system. (1) To tune the parameters appropriately; (2) To deal with dozens of configuration parameters which are involved to its performance. This paper will focus on optimizing the Hadoop MapReduce job performance. Our approach has two key model: Prediction and Optimization. The Predictio
APA, Harvard, Vancouver, ISO, and other styles
29

Lan, Chang-cheng, and 藍正昌. "Centerless grinding optimization of process parameters." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/98546778720257639111.

Full text
Abstract:
碩士<br>國立中央大學<br>機械工程學系在職專班<br>104<br>Centerless grinding process is widely used in producing the extra-smooth surface, particularly in the hard and brittle materials such as aluminum oxide (Al2O3), zirconium oxide (Zr2O3) and silicon carbide (SiC). The stability of the centerless grinding process is very sensitive to the set-up conditions due to the uniqueness of the work-holding system. Centerless grinding produces precision components with high productivity only when the set-up condition is optimally chosen .This thesis describes the effect of set-up conditions on the stability criteria of t
APA, Harvard, Vancouver, ISO, and other styles
30

Singh, Kulbir. "Optimization of machining parameters in milling." Thesis, 1992. http://hdl.handle.net/2429/2257.

Full text
Abstract:
The cost of machining for milling is dependent on machining parameters such as spindle speed and feed per tooth. The competitiveness of manufacturing industries can be increased by optimization of machining parameters. A scientific method for the optimization of machining parameters for workpieces of continously varying radial widths is proposed in this thesis. The necessary mathematics for the proposed procedure is derived for both single pass and multi-pass milling operations. The computational results obtained on the basis of derived mathematical formulation are analysed and discussed. The
APA, Harvard, Vancouver, ISO, and other styles
31

Shih, Ke-Lung, and 施克隆. "Optimization of system parameters for APDL models Using Particle Swarm Optimization." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/t2c823.

Full text
Abstract:
碩士<br>國立臺北科技大學<br>自動化科技研究所<br>101<br>In this study, the optimization code using MATLAB and ANSYS parametric design language (APDL) is proposed for parameter optimization. Three type optimization methods, which are genetic algorithm(GA), particle swarm optimization(PSO) and multi-objective genetic algorithms (MOGA), are studied in three case studies. The first two optimization methods are preformed using MATLAB codes integrated with APDL simulation to obtain the optimal parameters for comparison. The last one (MOGA) is implemented using the ANSYS workbench. The first case is to obtain the optim
APA, Harvard, Vancouver, ISO, and other styles
32

Hsu, Kung-Shin, and 許恭實. "Fuel Cell Optimization Parameters Estimate by Artificial Bee Colony Optimization Algorithm." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/82919075614695213241.

Full text
Abstract:
碩士<br>逢甲大學<br>電機工程所<br>100<br>In response to the increasing depletion of natural resources on Earth, countries around the world all work actively in the development of green renewable energy. On one hand, the useful life of other sources can be extended; on the other hand, it can reduce the concentration of carbon dioxide in the air to avoid the ozone layer destruction. However, wind power, solar power and other renewable energy sources have intermittent feature, which has to be compatible with effective energy storage system to achieve higher economic efficiency. Due to fuel cells can improve
APA, Harvard, Vancouver, ISO, and other styles
33

Hasda, Ranjan Kumar. "Optimization of EDM Process Parameters through Teaching Learning Based Optimization Algorithm." Thesis, 2013. http://ethesis.nitrkl.ac.in/5447/1/211ME2170.pdf.

Full text
Abstract:
Electrical Discharge Machining (EDM) is a non-traditional machining process where intricate and complex shapes can be machined. Only electrically conductive materials can be machined by this process and is one of the important machining processes for machining high strength, temperature-resistant (HSTR) alloys. For achieving the best performance of the EDM process, it is crucial to carry out parametric design responses such as Material Removal Rate, Tool Wear Rate, Gap Size etc. It is essential to consider most number of input parameters to get the better result. In the present w
APA, Harvard, Vancouver, ISO, and other styles
34

Chan, Chun-Kai, and 詹竣凱. "COMPETITIVE MULTI-OBJECTIVE OPTIMIZATION OF TURNING PARAMETERS." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/29931267469553295280.

Full text
Abstract:
碩士<br>大同大學<br>機械工程研究所<br>94<br>Surface roughness, tool life, and cutting force are considered as major objectives in the modern CNC (computerized numerical control) machining industry. This Study thesis is proposed to experimentally perform various turning operations with different cutting tools on an ECOCA-3807 CNC lathe under the concerns of multiple objectives. The Taguchi method is commenced through selection of orthogonal array for four machining parameters (cutting depth, feed rate, spindle speed, and tool runoff) with three different levels (low, medium, and high). Additionally, a th
APA, Harvard, Vancouver, ISO, and other styles
35

Lin, Chun-Ling, and 林君玲. "Neural Network Parameters Optimization Using Swarm Intelligence." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/69922956622784763089.

Full text
Abstract:
碩士<br>國立東華大學<br>電機工程學系<br>94<br>Artificial neural networks are also known as parallel distributed processors, adaptive systems, self-organizing systems, neurocomputers, connectionism etc. It refers to human mind and brain activity and has developed as a model. The neural networks consist of many simple processing elements with connections. Neural networks are a new-type of data processing and computing methodology enlightened by biological module. Many researchers in science expect the neural networks can be with its own intelligence and learning ability as human brain. Once this neural networ
APA, Harvard, Vancouver, ISO, and other styles
36

SU, JUNG-CHIH, and 蘇榮智. "Optimization of Process Parameters for EDM Operations." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/31642223008622062982.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>88<br>An investigation of optimization of process parameters of EDM operations has been reported in this thesis. A neural network has been used to constructed the relationships between the process parameters and machining performance. Then, genetic algorithms are applied to the neural network for determining the optimal process parameters subject to an objective function. As a result, the optimal process parameters from rough machining to finish machining can be obtained through this approach.
APA, Harvard, Vancouver, ISO, and other styles
37

Wu, Changyi, and 吳政益. "Optimization of Hot Extrusion Parameters for Powders." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/92398829270279227966.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>87<br>Taguchi experimental method and Analysis of Variance (ANOVA) technique are used in this study to discuss the influences of extrusion parameters and mechanical properties of A6061 aluminum alloy powder under hot extrusion. The process parameters discussed in this study are the pressure of cold isostatic pressing (CIP), sintering temperature, sintering time, and extrusion temperature. By adapting Taguchi experimental method, the numbers of experiment can be greatly reduced. Further ANOVA is used to analyze the effect of each factor and experimental error.
APA, Harvard, Vancouver, ISO, and other styles
38

Tsai, Yu-wei, and 蔡育瑋. "Process Parameters Optimization of Anodic Aluminum Oxide." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/09360102360948758619.

Full text
Abstract:
碩士<br>國立高雄第一科技大學<br>電機工程研究所碩士班<br>102<br>The purpose of the study is to optimize the anodic aluminum oxide conversion efficiency. The experiment of the study is divided into two parts using Taguchi Method。The control factorsfor the first part of experiment are annealing temperature (A), the annealing time (B), the dimensions of the magnet (C) and the magnet speed (D). The control factors for the second part of experiment are annealing time A, annealing temperature (B), size of the magnet(C) , magnet rotation speed (D), the voltage (E), the concentration of phosphoric acid (F), the concentratio
APA, Harvard, Vancouver, ISO, and other styles
39

Hsu, I.-Hua, and 徐弋滑. "Optimization Parameters for Heat Bending Steel Fabrication." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/28998388256332798612.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>機械與精密工程研究所<br>103<br>This study investigated the parameters in traditional heat bending fabrication processes and their effects on production speed and deformation. The Taguchi method was then used to optimize the parameters. The four factors influencing hot bending quality in this study were positive cooling. heating speed. nozzle size. and oxygen gauge pressure. The L18 (21*73) orthogonal array Taguchi method was used to conduct 18 heat bending tests. The objective function in this study was the warping angle and the highest value was desired. The experimental data was
APA, Harvard, Vancouver, ISO, and other styles
40

Chung, Chin-Mei, and 鍾岑玫. "Mask Design Parameters Optimization for Schottky Diode." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/08248119021991392886.

Full text
Abstract:
碩士<br>國立交通大學<br>管理學院工業工程與管理學程<br>100<br>In process of the production of Schottky Diode, The design of a parameter for the Mask destined the proof of Schottky Diode. Well-designed Mask makes Schottky Diode devise better conductance, which minimizes the starting voltage, lowers heat and energy consumption, and means higher transformation efficiency for the product and the organization. This research, not only in the way of Design of experiment(DOE), sought out the prominent factors that affected the comparative conductance to make progress the experiment with the designed parameter to the Mask,
APA, Harvard, Vancouver, ISO, and other styles
41

Chiu, Hui-Shan, and 邱慧珊. "EPS Extrusion Parameters Optimization Using Taguchi Method." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/5dc43m.

Full text
Abstract:
碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>98<br>Plastic extrusion is the most common technology in plastic industry. To obtain the optimum parameters, we need lots of experiments and experiences to get the value; however, doing experiments take lots of time and even if they ere done, there is theoretical basis to analyze them. Hereby, the purpose of this study is to find out the optimum parameters by using Taguchi Method. We found out the factors affecting the quality of PS extrusion by using Taguchi Method. The major factors to affecting PS extrusion process are as below:(A)Proportion of plastic mat
APA, Harvard, Vancouver, ISO, and other styles
42

Rout, Manmit, and Chinmay Kumar Parida. "Optimization of blasting parameters in opencast mines." Thesis, 2007. http://ethesis.nitrkl.ac.in/4287/1/Optimization_of_Blasting_Parameters_in_Opencast_Mines_06.pdf.

Full text
Abstract:
Drilling and blasting are the major unit operations in opencast mining. Inspite of the best efforts to introduce mechanization in the opencast mines, blasting continue to dominate the production. Therefore to cut down the cost of production optimal fragmentation from properly designed blasting pattern has to be achieved. Proper adoption of drilling and blasting can contribute significantly towards profitability and therefore optimization of these parameters is essential. Introduction Rock breaking by drilling and blasting is the first phase of the production cycle in most of the mining
APA, Harvard, Vancouver, ISO, and other styles
43

Fan, Chin-Yu, and 范今瑀. "Optimization of Operating Parameters for Stripper Recycle System." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/59699603733174246425.

Full text
Abstract:
碩士<br>國立中興大學<br>化學工程學系所<br>105<br>The purpose of this research is to find out the major controllable factors for the Stripper Recycle System of an opto-electronic fab. According to the result of the full factorial experiments, the optimization of operating can be estimated. The experiments included parameter adjustment as well as the cost-effectiveness analysis. The results pointed out that flow rate of feed, steam pressure, rotation speed are the major controllable factors. Based on Thin Film Evaporator of SRS, the results of the eighteen groups of experiments revealed that the significance o
APA, Harvard, Vancouver, ISO, and other styles
44

Chou, Cheng-Hsing, and 周政欣. "Optimization of Process parameters of Field emission properties." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/15374698289006330734.

Full text
Abstract:
碩士<br>東海大學<br>工業工程與經營資訊學系<br>93<br>In a numerous flat panel display technology, Carbon Nanotube Field Emission Display(CNT-FED)technology has a biggest change to replace LCD. The turn-on electron field and field emission current density are two quality characteristics in field emission properties.They are strongly correlated and influenced by the shape of CNT、the height of CNT、anode voltage、cathode voltage and gate position. The research will discuss field emission properties about nanotriode(cathode electrode、anode electrode and gate electrode). We integrate optimization of process parameters
APA, Harvard, Vancouver, ISO, and other styles
45

Tsai, Chi Hung, and 蔡棋鴻. "Optimization of Blending Parameters for Plastic Barrier Containers." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/35574900822690339631.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>高分子工程系<br>91<br>The plastic barrier containers are usually manufactured by laminar barrier method while extruder firstly modifies barrier materials. Most of blending parameters are adjusted by trial and error, which usually spends lots of time and costs. In this thesis, the approach is aimed at developing a parameter optimization system, which study influence of material blending proportion and extruder process parameters on the barrier property in plastic barrier containers. The process parameters include blending proportion of polyethylene with modified polyamide, blending
APA, Harvard, Vancouver, ISO, and other styles
46

Hsiao, Yung-Fa, and 蕭永發. "Optimization of design parameters for linear motion guide." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/56s3dq.

Full text
Abstract:
博士<br>國立臺灣科技大學<br>機械工程系<br>95<br>The main purpose of this paper is to optimize the design parameters of linear motion guide. The experiment is planned via the Taguchi experiment design method. Through the S/N ratio, grey-based Taguchi methods and analysis of variance, the optimal parameter combination is identified. The design of experiment employs the Taguchi method. Control factors include the preload grade, lubricant viscosity, ball precision grade, and with/without ball cage and with/without flange types. Its quality evaluation indicators comprise base smoothness, horizontal combination er
APA, Harvard, Vancouver, ISO, and other styles
47

LEE, LIEN-TSUN, and 李連村. "The Study of CNC Machining Performance Parameters Optimization." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/vk8278.

Full text
Abstract:
碩士<br>逢甲大學<br>機械與電腦輔助工程學系<br>105<br>Tool machining performance parameters have a very big impact on contour accuracy and processing time. At present only when a group of machine tool factory machining performance-related parameters to use for processing, so the best performer of the parameters are finishing factory settings, so processors for roughing and the second roughing, can not be shorter processing time to complete. This article is available for the relevant parameters Factory adjustment tools, the use of Taguchi experimental method selected time-related factors several key paramete
APA, Harvard, Vancouver, ISO, and other styles
48

Lin, Wen-Chung, and 林文忠. "Optimization of Welding Process Parameters for Pressure Vessel." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/54456664768251465447.

Full text
Abstract:
碩士<br>東南科技大學<br>防災科技研究所<br>98<br>Pressure vessel is considered as one of the dangerous equipment by Taiwan's Labor Safety and Health Law. The dangerous equipment will cause explosion to endangering workers and the public safety if manufactured or used inappropriately. Submerged Arc Welding (SAW) is commonly used in pressure vessel manufacturing. The welding quality will affect greatly to the make use safety of pressure vessel. Taguchi method is one of the most useful tools in experimental design. The method that has been widely used in occasions like less numbers of experiments can handle only
APA, Harvard, Vancouver, ISO, and other styles
49

Chen, Po-kuang, and 陳柏光. "Wire Bonding Parameters Optimization by Using Taguchi’s Method." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/05439336593088751228.

Full text
Abstract:
碩士<br>逢甲大學<br>資訊電機工程碩士在職專班<br>98<br>Abstract On the development of electrical technology and consumer’s demand on the electric products, humans never stop chasing on the trend of high performance and complex. Based on the innovation of SOP (small outline package) technology, it is always on the movement of high pincounts (I/O), miniaturization and low cost. During the process of wire bonding, it uses gold wire to connect chips and substrates in order to bridge the electric signals in the Integrated Circuits, IC. The wire bonding process of semiconductor is on the progress of developing
APA, Harvard, Vancouver, ISO, and other styles
50

Hsu, Chey-yuan, and 許哲源. "Solder balls Parameters Optimization by Using Taguchi’s Method." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/48690347459993977383.

Full text
Abstract:
碩士<br>國立屏東科技大學<br>工業管理系所<br>100<br>Student ID:N9657004 Title of thesis:Solder balls Parameters Optimization by Using Taguchi’s Method Total page:66 Name of Institute:National Pingtung University of Science and Technology, Institute of Industrial Management Graduate date:June, 2012 Degree Conferred:Master Name of student:Chey-yuan Hsu Adviser:Yun-Cheng Huang The contents of abstract in this thesis: The trend of integrated circuit is toward the research and manufacturing of lighter weight, thinner, smaller size as well as multiple feet, in order t
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!