To see the other types of publications on this topic, follow the link: Optimum speed.

Journal articles on the topic 'Optimum speed'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Optimum speed.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kutschera, A., and P. M. Render. "Corner speed versus optimum turn speed." Aeronautical Journal 107, no. 1073 (2003): 443–46. http://dx.doi.org/10.1017/s0001924000130052.

Full text
Abstract:
Work has been carried out by Kutschera on how to assess, at the conceptual design stage, the performance of fighter aircraft. As part of this work, Kutschera reviewed a number of existing and proposed metrics for assessing aircraft performance. Reference 4 also describes how the performance of an aircraft can be quantified by three types of metric. The first type are steady state or point performance metrics, such as turn rate plots and energy manoeuvrability diagrams. The second type are manoeuvrability metrics and the last are agility metrics.
APA, Harvard, Vancouver, ISO, and other styles
2

Asano, Kazuhiko. "Optimum Speed for Fishing Boats." JOURNAL OF THE MARINE ENGINEERING SOCIETY IN JAPAN 25, no. 6 (1990): 372–75. http://dx.doi.org/10.5988/jime1966.25.372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pennycuick, C. "Actual and 'optimum' flight speeds: field data reassessed." Journal of Experimental Biology 200, no. 17 (1997): 2355–61. http://dx.doi.org/10.1242/jeb.200.17.2355.

Full text
Abstract:
Previously published field observations of the air speeds of 36 species of birds, all observed by the same method (ornithodolite), were compared with estimates of the corresponding minimum power speeds, calculated with a default body drag coefficient of 0.1. This value, which was derived from recent wind tunnel studies, represents a downward revision from default values previously used and leads, in turn, to an upward revision of estimated minimum power speeds. The mean observed air speeds are now distributed around the minimum power speed, rather than in between the speeds for minimum power a
APA, Harvard, Vancouver, ISO, and other styles
4

ISHIHATA, Sairo. "Actual Berthing Speed of VLCC and its Optimum Speed." Journal of Japan Institute of Navigation 79 (1988): 177–84. http://dx.doi.org/10.9749/jin.79.177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khor, Yee Shin, Knut A. Døhlie, Knut A. Døhlie, and Dimitris Konovessis. "Optimum Speed Analysis for Large Containerships." Journal of Ship Production and Design 29, no. 03 (2013): 93–104. http://dx.doi.org/10.5957/jspd.2013.29.3.93.

Full text
Abstract:
During these times of fluctuating freight rates and oversupply, selection of optimum speed will give an operator a crucial advantage. Until the recession, the emphasis has always been on larger capacity and higher speed. Now, design innovation and slow steaming are becoming important and this article details new software, which is set up to assist the speed optimization process for large container ships. The software uses both propulsion and revenue-cost analysis with an ultralarge container ship model of 20,000 20-ft.unit (TEU) as a case study to derive the most profitable speed. Shippers' co
APA, Harvard, Vancouver, ISO, and other styles
6

Khor, Yee Shin, Knut A. Døhlie, Dimitris Konovessis, and Qing Xiao. "Optimum Speed Analysis for Large Containerships." Journal of Ship Production and Design 29, no. 3 (2013): 93–104. http://dx.doi.org/10.5957/jspd.29.2.120022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Smith, S., and J. Tlusty. "Update on High-Speed Milling Dynamics." Journal of Engineering for Industry 112, no. 2 (1990): 142–49. http://dx.doi.org/10.1115/1.2899557.

Full text
Abstract:
As spindle speeds and power have increased, the possibility of using the stability lobe phenomena to substantially increase the metal removal rate has become more attractive, and selection of optimum spindle speeds has become an important consideration. It is shown that, for many milling operations, it is desirable to set the tooth frequency equal to the natural frequency. At this spindle speed, the development of resonant forced vibration is actually inhibited by regeneration of waviness. An algorithm is presented for automatically selecting the optimum spindle speed based on the cutting forc
APA, Harvard, Vancouver, ISO, and other styles
8

Öztürk, Zübeyde, and Turgut Öztürk. "A simplified approach to determine the optimum operating speed on high-speed railway lines." Canadian Journal of Civil Engineering 36, no. 2 (2009): 196–208. http://dx.doi.org/10.1139/l08-107.

Full text
Abstract:
In this study, cost–speed relationship for high speed railways was examined and optimum economic speed was investigated. The Eskişehir–Ankara section of the İstanbul–Ankara railway line, which is still under construction, was taken as the sample. This section has been completed and test runs are being conducted. The new line is constructed parallel to the old railway line and the operation speeds and operation forms of the trains on this line are not yet finalized. It is not yet clear what the maximum operation speeds of the trains will be and whether the operation will be restricted to only h
APA, Harvard, Vancouver, ISO, and other styles
9

Suhua, Yang. "The optimum cutting speed of circular saw." Journal of Northeast Forestry University 6, no. 4 (1995): 58–60. http://dx.doi.org/10.1007/bf02842955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sin, Heung-Gweon, and Doohee Nam. "Optimum Speed Simulation for Electronic Toll Collection." Journal of the Institute of Webcasting, Internet and Telecommunication 13, no. 3 (2013): 87–92. http://dx.doi.org/10.7236/jiibc.2013.13.3.87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Mar, A., P. A. Morton, and J. E. Bowers. "Optimum facet reflectivity for high speed lasers." Electronics Letters 26, no. 17 (1990): 1382. http://dx.doi.org/10.1049/el:19900889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Bariska, M., and Z. Pásztory. "The optimum log feed speed with bandsaw." European Journal of Wood and Wood Products 73, no. 2 (2015): 245–50. http://dx.doi.org/10.1007/s00107-015-0883-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Nasiri, A. A., B. Abdi, S. M. M. Mirtalaei, and M. I. Ghiasi. "Optimum Speed Calculation for Electrical Machine Optimization in Variable Speed Applications." Research Journal of Applied Sciences, Engineering and Technology 7, no. 5 (2014): 897–902. http://dx.doi.org/10.19026/rjaset.7.332.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Muldi, Yuhendri, Muskhir Mukhlidi, and Taali. "A novel optimum tip speed ratio control of low speed wind turbine generator based on type-2 fuzzy system." Bulletin of Electrical Engineering and Informatics 8, no. 4 (2019): 1189–97. https://doi.org/10.11591/eei.v8i4.1450.

Full text
Abstract:
Variable speed control of wind turbine generator systems have been developed to get maximum output power at every wind speed variation, also called Maximum Power Points Tracking (MPPT). Generally, MPPT control system consists of MPPT algorithm to track the controller reference and generator speed controller. In this paper, MPPT control system is proposed for low speed wind turbine generator systems (WTGs) with MPPT algorithms based on optimum tip speed ratio (TSR) and generator speed controller based on field oriented control using type-2 fuzzy system (T2FS). The WTGs are designed using horizo
APA, Harvard, Vancouver, ISO, and other styles
15

Jabbari, Masoud, and Cem C. Tutum. "Optimum Rotation Speed for the Friction Stir Welding of Pure Copper." ISRN Materials Science 2013 (August 6, 2013): 1–5. http://dx.doi.org/10.1155/2013/978031.

Full text
Abstract:
The friction stir welding (FSW) was conducted in the pure copper plates with the thickness of 4 mm in the constant traverse speed of 25 mm/min and five different rotation speeds. Analysis of metallographic images showed that the increasing of the rotation speed results in the increase of grain size in the nugget zone. Vickers hardness tests were conducted on the weld samples and the maximum hardness obtained in rotation speed of 900 rpm. Results of the tensile tests and their comparison with that of the base metal showed that the maximum strength and the minimum elongation are achieved again i
APA, Harvard, Vancouver, ISO, and other styles
16

Wang, Ming Ming, and Ren Xian Li. "Analysis of Optimum Valve Timing Based on Diesel Engine Comprehensive Performance." Advanced Materials Research 347-353 (October 2011): 4118–24. http://dx.doi.org/10.4028/www.scientific.net/amr.347-353.4118.

Full text
Abstract:
In order to investigate the effect of variable valve timing on engine power performance, fuel economy performance and emission performance quantitatively, proceed to optimize it, a high speed diese Specific Fuel Consumption, quantity of NOx and Soot, mass of fresh charge were calculated by 3-D CFD method l engine contains variable valve timing system (VVT) was researched. The effective power, at 6 speeds conditions which valve timing parameters were modulated. A method of calculating CRG was suggested. The results indicate that exhaust advance angle has a little impact on sweep and emission pe
APA, Harvard, Vancouver, ISO, and other styles
17

Huang, Yuan Mao, and Bi Shyang Hu. "Minimum Fuel Consumption and CO Emission and Optimum Speed of the Motorcycle with a CVT." Journal of Energy Resources Technology 125, no. 4 (2003): 311–17. http://dx.doi.org/10.1115/1.1625395.

Full text
Abstract:
The simulated annealing algorithm with the Bessel method for curve fitting and the tensor product method for surface fitting is used to transform engine discrete experimental data into a form that enables these data to be incorporated in the optimization process. Optimum curves of the engine torque versus the engine rotational speed and the engine rotational speed versus the motorcycle speed for the fuel consumption and the carbon monoxide (CO) emission are obtained for a motorcycle with a continuously variable transmission (CVT). The engine rotational speed at which a motorcycle begins to mov
APA, Harvard, Vancouver, ISO, and other styles
18

Liu, Shi Ming, Wei Dong Yang, Ling Hua Dong, and Jie Wu. "Performance and Loads Investigation of Optimum Speed Rotors." Applied Mechanics and Materials 607 (July 2014): 500–506. http://dx.doi.org/10.4028/www.scientific.net/amm.607.500.

Full text
Abstract:
Performance of helicopters can be significantly influenced by rotor speed variation. A comprehensive model is built to exam the influences of rotating speed on performance and blade loads of a variable speed rotor. The results indicate that for a 2,200kg gross weight helicopter, power reduction is up to 30% at 100km/h by slowing the rotor properly. For lower gross weights, the reductions in rotor rotating speed and power savings are more apparent. The optimum rotating speed may cause a 20.5% increase in endurance and 8.5% in range by thoroughly consuming 400kg of fuel. Rotor RPM variation has
APA, Harvard, Vancouver, ISO, and other styles
19

Pan, Cheng Yi. "Calculation of Speed Ratio of Two-Stage Helical Gear Reducer for Minimum Mass." Applied Mechanics and Materials 274 (January 2013): 149–52. http://dx.doi.org/10.4028/www.scientific.net/amm.274.149.

Full text
Abstract:
This paper analyses distribution of the total speed ratio of two-stage helical gear reducer. On the minimum mass and contact strength condition , the optimum speed ratio equation is derived. By means of the least square method, the fitting formula of calculating optimum speed ratio on minimum mass candition is obtained. Using this formula, the optimum speed ratio of two-stage helical gear reducer having minimum mass can be found quickly and accurately.
APA, Harvard, Vancouver, ISO, and other styles
20

Moosa Omran, Khulood, Basil Hani Jasim, and Kadhim H. Hassan. "Optimum speed controller structure utilizing the MCA approach." Bulletin of Electrical Engineering and Informatics 10, no. 2 (2021): 640–49. http://dx.doi.org/10.11591/eei.v10i2.2733.

Full text
Abstract:
In this paper, an optimal speed controller for dc motor is considered using a PID controller and tuned its parameters of gain to offer an optimal solution by using a modified camel algorithm MCA approach. The proposed MCA scheme was applied to solve the difficulty of getting the optimum gains of PID parameters. The MCA has good evolutionary speed with the simple construction of optimization depend on camel searching performance. The characteristics of the MCA algorithm were confirmed by optimizing the gains parameters of proportional, integral, derivative PID controller. The performance of PID
APA, Harvard, Vancouver, ISO, and other styles
21

Konrad, B., and K. Petermann. "Optimum fiber dispersion in high-speed TDM systems." IEEE Photonics Technology Letters 13, no. 4 (2001): 299–301. http://dx.doi.org/10.1109/68.917831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

MAEMORI, Ken'ichi, and Katsuo SAKAMOTO. "Optimum design of speed control humps for vehicles." Transactions of the Japan Society of Mechanical Engineers Series C 54, no. 502 (1988): 1217–22. http://dx.doi.org/10.1299/kikaic.54.1217.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Mar, A., P. A. Morton, and J. E. Bowers. "Erratum: Optimum facet reflectivity for high speed lasers." Electronics Letters 26, no. 22 (1990): 1922. http://dx.doi.org/10.1049/el:19901238.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Khulood, Moosa Omran, Hani Jasim Basil, and H. Hassan Kadhim. "Optimum speed controller structure utilizing the MCA approach." Bulletin of Electrical Engineering and Informatics 10, no. 2 (2021): 640~649. https://doi.org/10.11591/eei.v10i2.2733.

Full text
Abstract:
In this paper, an optimal speed controller for dc motor is considered using a PID controller and tuned its parameters of gain to offer an optimal solution by using a modified camel algorithm MCA approach. The proposed MCA scheme was applied to solve the difficulty of getting the optimum gains of PID parameters. The MCA has good evolutionary speed with the simple construction of optimization depend on camel searching performance. The characteristics of the MCA algorithm were confirmed by optimizing the gains parameters of proportional, integral, derivative PID controller. The performance of PID
APA, Harvard, Vancouver, ISO, and other styles
25

Kaliński, Krzysztof J., Marek A. Galewski, Michał Mazur, and Marek Chodnicki. "Modelling and Simulation of a New Variable Stiffness Holder for Milling of Flexible Details." Polish Maritime Research 24, s1 (2017): 115–24. http://dx.doi.org/10.1515/pomr-2017-0029.

Full text
Abstract:
Abstract Modern industry expectations in terms of milling operations often demand the milling of the flexible details by using slender ball-end tools. This is a difficult task because of possible vibration occurrence. Due to existence of certain conditions (small depths of cutting, regeneration phenomena), cutting process may become unstable and self-excited chatter vibration may appear. Frequency of the chatter vibration is close to dominant natural frequency of the workpiece or the tool. One of the methods of chatter vibration avoidance is matching the spindle speed to the optimum phase shif
APA, Harvard, Vancouver, ISO, and other styles
26

Reza, Mohammad Hosain, and Kamal Hossain. "Determination of Optimum Speed of a Knitting Machine by Analyzing the Different Parameters." European Scientific Journal, ESJ 18, no. 21 (2022): 22. http://dx.doi.org/10.19044/esj.2022.v18n21p22.

Full text
Abstract:
The objective of this research was to determine the optimum speed of a knitting machine. This study compared the different parameters of a knitting machine running at various speeds. For this, a knitting machine of 22-inch diameter and 24 gauge with 66 feeders knitting 24 Ne yarn was selected and was run at 40 rotations per minute (r.p.m.).; 42 rotations per minute (r.p.m.).; and 44 rotations per minute (r.p.m.) for total 24 hours for each speed. Data was collected for two days for 12 hours each. The different causes of stoppages were recorded with their frequencies and time for total of a 24
APA, Harvard, Vancouver, ISO, and other styles
27

Kuznetsova, Elena. "MODELLING OF PROCESS OF PRESSING OF AXISYMMETRIC HARDWARE TAKING INTO ACCOUNT TECHNOLOGICAL P ARAMETERS." Applied Mathematics and Control Sciences, no. 1 (April 25, 2018): 29–43. http://dx.doi.org/10.15593/2499-9873/2018.1.03.

Full text
Abstract:
In work modeling of processes of pressing of axisymmetric hardware at production of bars and pipes is considered. Modeling is carried out in the conditions of the optimum scheme of a tension - mainly in the conditions of uneven three-axis compression. When developing model of technological operations the cross amount of preparation is chosen, proceeding from minimum admissible extract providing optimum mechanical properties of a product and their uniformity on the section and length. Thus the saved-up practical data taking into account key parameters of process of pressing - pressing speeds (s
APA, Harvard, Vancouver, ISO, and other styles
28

Neumann, B. "Rotodynamic Pump Efficiency Variations Due to Changes of Operating Speed or Temperature." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 206, no. 1 (1992): 27–39. http://dx.doi.org/10.1243/pime_proc_1992_206_005_02.

Full text
Abstract:
The same pump is often required to operate at speeds and temperatures different from those at which it was tested by the manufacturer. This can be and is frequently done with appropriate design measures taken to meet the most stringent operating conditions dictated by the highest operating speed and temperature. In other cases testing of the unit at its design speed (or temperature) may be impractical and too costly to he justified. In all cases a prediction of the unit's performance at its full operating conditions is important, particularly for high-power, large or high-speed machines. Theor
APA, Harvard, Vancouver, ISO, and other styles
29

Wang, Zhi-Gen, Chien-Cheng Lo, Yi-Cheng Chen, and Hung-Chih Liu. "Dynamic Modeling, Optimization and Experiment for a High-Speed Spur Gear Set." Machines 10, no. 8 (2022): 653. http://dx.doi.org/10.3390/machines10080653.

Full text
Abstract:
This study proposed a novel methodology for reducing the vibration of a high-speed spur gear pair (up to 30,000 rpm) by performing multi-objective optimization of the peak-to-peak loaded transmission error (PPLTE) under three assembly conditions. The optimum tip relief parameters for the high-speed spur gear set were studied by considering the practical manufacturing tolerances on the gear shaft and bearing bores. First, the PPLTE under three assembly conditions was determined by loaded tooth contact analysis. Multi-objective optimization with a genetic algorithm was used to determine the opti
APA, Harvard, Vancouver, ISO, and other styles
30

Mogahzy, Yehia E. El, and Warren S. Perkins. "Effect of Creep-Related Overdrying in Sizing on Warp Characteristics and Weaving Performance." Textile Research Journal 62, no. 6 (1992): 317–24. http://dx.doi.org/10.1177/004051759206200602.

Full text
Abstract:
Effects of creep-related overdrying during sizing on warp characteristics and weaving performance have been studied for a particular warp. During sizing, parameters such as moisture regain, warp stretch, and lease tension were monitored on a yard-to-yard basis at both normal and creep speeds. Yarn type and sizing agent were kept constant. Optimum levels of squeeze role pressure at both normal and creep speeds were determined before investigating the effect of overdrying on weaving performance. The results indicated that there is a critical pressure/speed combination at which yarn characteristi
APA, Harvard, Vancouver, ISO, and other styles
31

Shahad J. Shahbaz, Ali A. D. Al-Zuky, and Fatin E. M. Al-Obaidi1. "Detection of Traffic Signs using feature based on of Speed Up Robust method." Journal of the College of Basic Education 29, no. 119 (2023): 9–1. http://dx.doi.org/10.35950/cbej.v29i119.10602.

Full text
Abstract:
Variations in perspective, illumination, occlusion, motion blur, and weatherworn degeneration of signs could all be crucial in identifying road signs. The goal of this project is to evaluate the image processing technique's performance in detecting and recognizing road signs, as well as determine the optimum threshold value range for doing so. The Speed Up Robust Features (SURF) detector was tested in the current project to detect and recognize road signs through Bagdad’s streets under various speeds and threshold values. The importance of the threshold’s value was highlighted here to occupy a
APA, Harvard, Vancouver, ISO, and other styles
32

Krasyk, Aleksandr M., and Evgeny Yu Russky. "OPTIMIZING DESIGN PARAMETERS OF ROTATING BLADES OF MINE AXIAL FANS." Interexpo GEO-Siberia 2 (July 8, 2020): 98–102. http://dx.doi.org/10.33764/2618-981x-2020-2-98-102.

Full text
Abstract:
This paper considers optimum designing of rotating blades of axial fans, which satisfy strength conditions at a tip speed of more than 140 m/s. Due to the high rotation velocities, cast blades lack the required strength; therefore, it is necessary to develop a lightweight design which allows increasing fan rotor speed. Mathematical methods for searching optimum design parameters by optimality criteria are used in this paper. The design obtained in this case will be closest to the optimum design, providing the given design parameters with the selected criterion. The optimum design was searched
APA, Harvard, Vancouver, ISO, and other styles
33

Devendra, Potnuru, Siva Lova Venkata Ayyarao Tummala, Venkata Suresh Kumar Lagudu, Venkata Pavan Kumar Yellapragada, John Pradeep Darsy, and Pradeep Reddy Challa. "Salp swarm algorithm based optimal speed control for electric vehicles." International Journal of Power Electronics and Drive Systems (IJPEDS) 13, no. 2 (2022): 755–63. https://doi.org/10.11591/ijpeds.v13.i2.pp755-763.

Full text
Abstract:
The paper is all about the implementation of a novel bio-inspired meta-heuristic salp swarm algorithm (SSA) for speed control of brushless DC (BLDC) motor drive that is run in sensorless control mode. The angular speed of the motor is evaluated using an extended kalman filter, in which the dynamics of the motor are nonlinear. The error in speeds between actual and estimated is fed to the PID controller. To achieve the good transient operation of the motor drive, the parameters of the PID are tuned with the SSA. The optimum PID gains are determined by the minimization of integral square error a
APA, Harvard, Vancouver, ISO, and other styles
34

Çetin, N., M. Yurdusev, R. Ata, and A. Özdamar. "Assessment of Optimum Tip Speed Ratio of Wind Turbines." Mathematical and Computational Applications 10, no. 1 (2005): 147–54. http://dx.doi.org/10.3390/mca10010147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Melfi, M. J. "Optimum pole configuration of variable speed AC induction motors." IEEE Industry Applications Magazine 3, no. 6 (1997): 15–20. http://dx.doi.org/10.1109/2943.628109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Jiang, Xiao-qiang, Wei-ding Long, and Min Li. "Optimum control strategy for all-variable speed chiller plant." Journal of Central South University 18, no. 2 (2011): 573–79. http://dx.doi.org/10.1007/s11771-011-0733-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Danilin, S. V. "Choosing the optimum speed of a filter blade rotor." Chemical and Petroleum Engineering 29, no. 2 (1993): 51–54. http://dx.doi.org/10.1007/bf01150376.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Yin, Mark T., John F. Andrews, and Michael K. Stenstrom. "Optimum Simulation and Control of Fixed-Speed Pumping Stations." Journal of Environmental Engineering 122, no. 3 (1996): 205–11. http://dx.doi.org/10.1061/(asce)0733-9372(1996)122:3(205).

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Koelle, D. E. "On the optimum cruise speed of a hypersonic aircraft." IEEE Aerospace and Electronic Systems Magazine 4, no. 5 (1989): 13–16. http://dx.doi.org/10.1109/62.31807.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Park, J. S., and S. W. Kim. "Optimum speed reduction ratio for D.C. servo drive systems." International Journal of Machine Tools and Manufacture 29, no. 2 (1989): 207–16. http://dx.doi.org/10.1016/0890-6955(89)90032-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Shtremel’, M. A., L. V. Karabasova, V. I. Chizhikov, and S. I. Vodeniktov. "On optimum alloying of high-vanadium, high-speed steel." Metal Science and Heat Treatment 41, no. 4 (1999): 146–50. http://dx.doi.org/10.1007/bf02465798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Temelcan, Gizem, Hale Gonce Kocken, and Inci Albayrak. "System Optimum Fuzzy Traffic Assignment Problem." PROMET - Traffic&Transportation 31, no. 6 (2019): 611–20. http://dx.doi.org/10.7307/ptt.v31i6.3210.

Full text
Abstract:
This paper focuses on converting the system optimum traffic assignment problem (SO-TAP) to system optimum fuzzy traffic assignment problem (SO-FTAP). The SO-TAP aims to minimize the total system travel time on road network between the specified origin and destination points. Link travel time is taken as a linear function of fuzzy link flow; thus each link travel time is constructed as a triangular fuzzy number. The objective function is expressed in terms of link flows and link travel times in a non-linear form while satisfying the flow conservation constraints. The parameters of the problem a
APA, Harvard, Vancouver, ISO, and other styles
43

Peters, David A., and Xi Rong. "Optimum Operational Parameters for Yawed Wind Turbines." International Journal of Aerospace Engineering 2011 (2011): 1–16. http://dx.doi.org/10.1155/2011/635750.

Full text
Abstract:
A set of systematical optimum operational parameters for wind turbines under various wind directions is derived by using combined momentum-energy and blade-element-energy concepts. The derivations are solved numerically by fixing some parameters at practical values. Then, the interactions between the produced power and the influential factors of it are generated in the figures. It is shown that the maximum power produced is strongly affected by the wind direction, the tip speed, the pitch angle of the rotor, and the drag coefficient, which are specifically indicated by figures. It also turns o
APA, Harvard, Vancouver, ISO, and other styles
44

Lekube, J., A. J. Garrido, and I. Garrido. "Variable speed control in wells turbine-based oscillating water column devices: optimum rotational speed." IOP Conference Series: Earth and Environmental Science 136 (March 2018): 012017. http://dx.doi.org/10.1088/1755-1315/136/1/012017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Liu, Yanwen, and Hongzhou Jiang. "Optimum Curvature Characteristics of Body/Caudal Fin Locomotion." Journal of Marine Science and Engineering 9, no. 5 (2021): 537. http://dx.doi.org/10.3390/jmse9050537.

Full text
Abstract:
Fish propelled by body and/or caudal fin (BCF) locomotion can achieve high-efficiency and high-speed swimming performance, by changing their body motion to interact with external fluids. This flexural body motion can be prescribed through its curvature profile. This work indicates that when the fish swims with high efficiency, the curvature amplitude reaches a maximum at the caudal peduncle. In the case of high-speed swimming, the curvature amplitude shows three maxima on the entire body length. It is also demonstrated that, when the Reynolds number is in the range of 104–106, the swimming spe
APA, Harvard, Vancouver, ISO, and other styles
46

Kamalizadeh, Saeid, Seyed Ali Niknam, Marek Balazinski, and Sylvain Turnne. "The Use of TOPSIS Method for Multi-Objective Optimization in Milling Ti-MMC." Metals 12, no. 11 (2022): 1796. http://dx.doi.org/10.3390/met12111796.

Full text
Abstract:
This paper presents the use of TOPSIS, a multi-criteria decision-making model combined with the Taguchi method to find the optimum milling parameters. TOPSIS is the Technique for Order Preference by Similarity to the Ideal Solution and shows the value of closeness to the positive ideal solution. This study shows the optimum combination of process parameters using the shortest distance from the ideal solution. The surface roughness and flank tool wear were considered the objectives for simultaneous optimization. After converting multiple responses into a single response, the Taguchi method was
APA, Harvard, Vancouver, ISO, and other styles
47

Ariff, Tasnim Firdaus, Muhamad Fahmie Paimin, and Abdirahman Hassan. "Dry Machining of T6061 Aluminium Alloy Using Titanium Nitride (TiN) and Titanium Carbonitride (TiCN) Coated Tools." Applied Mechanics and Materials 284-287 (January 2013): 291–95. http://dx.doi.org/10.4028/www.scientific.net/amm.284-287.291.

Full text
Abstract:
Dry machining is a clean machining process and it will be considered as a necessity for manufacturing industries in future. Dry machining is environmental friendly and safe to be performed. Regardless of decreasing tool life due to lack of lubricants, choosing dry machining over wet machining may be a wiser choice since the cost of purchasing and disposing the cutting fluids can contribute to a higher cost. Tool wear intensities of TiN and TiCN coated tools using both dry and traditional wet machining was studied with the aim in finding the optimum cutting speed from three different cutting sp
APA, Harvard, Vancouver, ISO, and other styles
48

Liu, Fen, Jun Xia Yan, and Xiao Wen Yuan. "Optimum Design of Drive Project in Lathe Speed-Change System." Advanced Materials Research 472-475 (February 2012): 2227–30. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2227.

Full text
Abstract:
Abstract: Based on the graphic theory and the design method of classification model, a new method of optimum design of drive project in lathe speed-change system is proposed. The mathematical model and optimum method are set up. This method can be used to design speed changing gear box of the lathe. This has a very important meaning in improving design precision and shorting design time.
APA, Harvard, Vancouver, ISO, and other styles
49

Song, Shaoxu, Fei Gao, Aoqian Zhang, Jianmin Wang, and Philip S. Yu. "Stream Data Cleaning under Speed and Acceleration Constraints." ACM Transactions on Database Systems 46, no. 3 (2021): 1–44. http://dx.doi.org/10.1145/3465740.

Full text
Abstract:
Stream data are often dirty, for example, owing to unreliable sensor reading or erroneous extraction of stock prices. Most stream data cleaning approaches employ a smoothing filter, which may seriously alter the data without preserving the original information. We argue that the cleaning should avoid changing those originally correct/clean data, a.k.a. the minimum modification rule in data cleaning. To capture the knowledge about what is clean , we consider the (widely existing) constraints on the speed and acceleration of data changes, such as fuel consumption per hour, daily limit of stock p
APA, Harvard, Vancouver, ISO, and other styles
50

Jamaluddin, H., J. A. Ghani, B. Md Deros, M. N. Ab Rahman, and R. Ramli. "Quality improvement using Taguchi method in shot blasting process." Journal of Mechanical Engineering and Sciences 10, no. 2 (2016): 2200–2213. https://doi.org/10.15282/jmes.10.2.2016.22.0206.

Full text
Abstract:
This paper presents the reliability of the Taguchi Method for improving the product and process quality in the industrial environment. The purpose is to signify the applicability of the Taguchi method in process optimization. The application of the Taguchi design of experiment (DOE) is widely reported and published but the success of the Taguchi method as a prominent tool in solving the industrial problem is not disclosed. In this study, the shot blasting process was chosen with two control factors of blasting speed and turntable speed; both factors were set at three levels. The rotor blasting
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!