Relevant bibliographies by topics / Organic flexible electronics

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Organic flexible electronics'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Organic flexible electronics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Organic flexible electronics"

1

Ling, Haifeng, Shenghua Liu, Zijian Zheng, and Feng Yan. "Organic Flexible Electronics." Small Methods 2, no. 10 (June 14, 2018): 1800070. http://dx.doi.org/10.1002/smtd.201800070.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Owens, Róisín M., and George G. Malliaras. "Organic Electronics at the Interface with Biology." MRS Bulletin 35, no. 6 (June 2010): 449–56. http://dx.doi.org/10.1557/mrs2010.583.

Full text
Abstract:
AbstractThe emergence of organic electronics represents one of the most dramatic technological developments of the past two decades. Perhaps the most important frontier of this field involves the interface with biology. The “soft” nature of organics offers better mechanical compatibility with tissue than traditional electronic materials, while their natural compatibility with mechanically flexible substrates suits the nonplanar form factors often required for implants. More importantly, the ability of organics to conduct ions in addition to electrons and holes opens up a new communication channel with biology. In this article, we consider a few examples that illustrate the coupling between organic electronics and biology and highlight new directions of research.
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Jang-Joo, Min-Koo Han, and Yong-Young Noh. "Flexible OLEDs and organic electronics." Semiconductor Science and Technology 26, no. 3 (February 14, 2011): 030301. http://dx.doi.org/10.1088/0268-1242/26/3/030301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Yu, Lingjie Sun, Cong Wang, Fangxu Yang, Xiaochen Ren, Xiaotao Zhang, Huanli Dong, and Wenping Hu. "Organic crystalline materials in flexible electronics." Chemical Society Reviews 48, no. 6 (2019): 1492–530. http://dx.doi.org/10.1039/c8cs00406d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

D., Nirmal. "HIGH PERFORMANCE FLEXIBLE NANOPARTICLES BASED ORGANIC ELECTRONICS." December 2019 2019, no. 02 (December 24, 2019): 99–106. http://dx.doi.org/10.36548/jei.2019.2.005.

Full text
Abstract:
The attributes of the organic materials have made them more prominent in a wide range of applications engaged for large or small purpose such as the solar cells or the displays in the mobile devices. The solar cells developed using the organic semiconductors are more advantageous due to their flexibility and their easy installation. Despite the versatile nature of the and easy implementation the organic semiconductors still suffers from low efficiency in term of cost, performance and size. The proposed method incorporates the nanomaterials in the organic solar cell to improvise efficiency (performance) and to minimize the cost as well as the size of the solar cells. The proposed method replaces the semiconductor that is organic by incorporating the organic semiconductors with the nanoparticle additives to have a perfect blending in solution to improve the crystallizations of the semiconductor, and the uniformity thus improvising the power conversion efficiency in the solar cells and minimizing the size and the cost . The result acquired through evaluation proves the performance improvements to 19% form 3.5% in the solar cells.
APA, Harvard, Vancouver, ISO, and other styles
6

Logothetidis, S. "Focus on Symposium on Flexible Organic Electronics." European Physical Journal Applied Physics 51, no. 3 (September 2010): 33201. http://dx.doi.org/10.1051/epjap/2010100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Caironi, Mario, Thomas D. Anthopoulos, Yong-Young Noh, and Jana Zaumseil. "Organic and Hybrid Materials for Flexible Electronics." Advanced Materials 25, no. 31 (August 13, 2013): 4208–9. http://dx.doi.org/10.1002/adma.201302873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Lu Hai, Yi Fang, Zhi Qing Xin, Xiao Jun Tang, Peng Du, and Wen Zhao. "Features of Printing and Display." Key Engineering Materials 428-429 (January 2010): 372–78. http://dx.doi.org/10.4028/www.scientific.net/kem.428-429.372.

Full text
Abstract:
The manufacture of display device is a complex technology. To reach the flexible display like E-paper, many manufacture process such as driving electrode circuit and transistor must be combined with printing technology. From the information reported, the application of gravure prints technology in organic electronics; off-set printing in EMI film and screen technology in circuit are summarized. The study was more about ink jet print technology. It was described that ink jet was used in OLED (Organic light-emitting diode), OTFT (organic thin film transistor), polymer solar cell/ Flexible organic photovoltaic cell and so on. An OE-A (organic electronics application) roadmap for the charge carrier mobility of semiconductors for organic electronics applications was given. To achieve the printed circuit, the nano silver conductive ink was applied and the ink jet circuit surface was tested by microscopy, the conductive and flexible silver film was with many advantages than screen circuit. It was concluded that the printing electronic will play important roll in the display development.
APA, Harvard, Vancouver, ISO, and other styles
9

D'Iorio, M. "Molecular materials for micro-electronics." Canadian Journal of Physics 78, no. 3 (April 2, 2000): 231–41. http://dx.doi.org/10.1139/p00-033.

Full text
Abstract:
Molecular organic materials have had an illustrious past but the ability to deposit these as homogeneous thin films has rejuvenated the field and led to organic light-emitting diodes (OLEDs) and the development of an increasing number of high-performance polymers for nonlinear and electronic applications. Whereas the use of organic materials in micro-electronics was restricted to photoresists for patterning purposes, polymeric materials are coming of age as metallic interconnects, flexible substrates, insulators, and semiconductors in all-plastic electronics. The focus of this topical review will be on organic light-emitting devices with a discussion of the most recent developments in electronic devices.PACS Nos.: 85.60Jb, 78.60Fi, 78.55Kz, 78.66Qn, 73.61Ph, 72.80Le
APA, Harvard, Vancouver, ISO, and other styles
10

Marks, Tobin J. "Materials for organic and hybrid inorganic/organic electronics." MRS Bulletin 35, no. 12 (December 2010): 1018–27. http://dx.doi.org/10.1557/mrs2010.707.

Full text
Abstract:
Materials scientists involved in synthesis are exceptionally skilled at designing and constructing individual molecules with the goal of introducing rationally tailored chemical and physical properties. However, the task of assembling such special molecules into organized, supramolecular structures with precise, nanometer-level organizational control to execute specific functions presents a daunting challenge. Soft and hard matter suitable for unconventional types of electronic circuitry represents a case in point and, in principal, offer capabilities not readily achievable with conventional silicon electronics. In this context, “unconventional” means circuitry that can span large areas, can be mechanically flexible and/or optically transparent, can be created by large-scale, high-throughput fabrication techniques, and has atomic-level tunability of properties. In the process of preparing, characterizing, and fabricating prototype devices with such materials, we learn many new things about the electronic and electrical properties of the materials and the interfaces between them. This account briefly overviews recent progress in three interconnected areas: (1) organic semiconductors for complementary π-electron circuits, (2) soft matter high-κ gate dielectrics for organic and inorganic electronics, and (3) metal-oxide semiconductors as components in such devices. Space limitations allow only touching upon selected highlights in this burgeoning field.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Organic flexible electronics"

1

Sankir, Nurdan Demirci. "Flexible Electronics: Materials and Device Fabrication." Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/30207.

Full text
Abstract:
This dissertation will outline solution processable materials and fabrication techniques to manufacture flexible electronic devices from them. Conductive ink formulations and inkjet printing of gold and silver on plastic substrates were examined. Line patterning and mask printing methods were also investigated as a means of selective metal deposition on various flexible substrate materials. These solution-based manufacturing methods provided deposition of silver, gold and copper with a controlled spatial resolution and a very high electrical conductivity. All of these procedures not only reduce fabrication cost but also eliminate the time-consuming production steps to make basic electronic circuit components. Solution processable semiconductor materials and their composite films were also studied in this research. Electrically conductive, ductile, thermally and mechanically stable composite films of polyaniline and sulfonated poly (arylene ether sulfone) were introduced. A simple chemical route was followed to prepare composite films. The electrical conductivity of the films was controlled by changing the weight percent of conductive filler. Temperature dependent DC conductivity studies showed that the Mott three dimensional hopping mechanism can be used to explain the conduction mechanism in composite films. A molecular interaction between polyaniline and sulfonated poly (arylene ether sulfone) has been proven by Fourier Transform Infrared Spectroscopy and thermogravimetric analysis. Inkjet printing and line patterning methods also have been used to fabricate polymer resistors and field effect transistors on flexible substrates from poly-3-4-ethyleneoxythiophene/poly-4-sytrensulfonate. Ethylene glycol treatment enhanced the conductivity of line patterned and inkjet printed polymer thin films about 900 and 350 times, respectively. Polymer field effect transistors showed the characteristics of traditional p-type transistors. Inkjet printing technology provided the transfer of semiconductor polymer on to flexible substrates including paper, with high resolution in just seconds.
Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
2

Najafabadi, Ehsan. "Stacked inverted top-emitting white organic light-emitting diodes." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/52990.

Full text
Abstract:
The majority of research on Organic Light-Emitting Diodes (OLEDs) has focused on a top-cathode, conventional bottom-emitting architecture. Yet bottom-cathode, inverted top-emitting OLEDs offer some advantages from an applications point of view. In this thesis, the development of high performance green electroluminescent inverted top-emitting diodes is first presented. The challenges in producing an inverted structure are discussed and the advantages of high efficiency inverted top-emitting OLEDs are provided. Next, the transition to a stacked architecture with separate orange and blue emitting layers is demonstrated, allowing for white emission. The pros and cons of the existing device structure is described, with an eye to future developments and proposed follow-up research.
APA, Harvard, Vancouver, ISO, and other styles
3

Jönsson, Stina Karin Maria. "Towards flexible organic electronics : photoelectron spectroscopy of surfaces and interfaces /." Linköping : Univ, 2004. http://www.bibl.liu.se/liupubl/disp/disp2004/tek895s.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gaj, Michael Peter. "High-performance organic light-emitting diodes for flexible and wearable electronics." Diss., Georgia Institute of Technology, 2016. http://hdl.handle.net/1853/55011.

Full text
Abstract:
Optoelectronic devices based on organic semiconductors have been the focus of increasing research over the past two decades. While many of the potential organic electronic concepts (solar cells, transistors, detectors etc.) are still in their infancy stage, organic light-emitting diodes have gained commercial acceptance for their potential in high resolution displays and solid-state lighting. However, in order for these devices to reach their full potential significant advances need to make to address their fundamental limitations, specifically: device life-time, thin-film encapsulation and scalability to a high volume manufacturing setting. The work presented in this thesis demonstrates new strategies to design and manufacture high-performance OLEDs for next generation electronics. In the first part, high-performance OLEDS using a simple three-layer organic semiconductor device structure are demonstrated. These devices utilize two novel materials (Poly-TriCZ and mCPSOB) to achieve efficient charge balance and exciton confinement in the emissive region of the device. Moreover, the electrical properties of these materials allow them to serve as a suitable ‘universal’ material combination to yield high-performance OLEDs with high-energy phosphors (i.e. blue- or deep-blue-emitting dopants). To demonstrate this feature, green- and blue-emitting OLED results are provided that define the state-of-the-art for phosphorescent OLEDs. These results are then extended to show high-performance with a new set of high-efficiency blue- and green-emitting dopants based on thermally activated delayed fluorescence (TADF), which also proceed to define the state-of-the-art in electroluminescence from TADF. The second part of this thesis continues this work and extends the results to a new class of polymeric substrates, called shape memory polymers (SMPs). SMPs provide a new alternative to flexible, polymeric substrates due to their unique mechanical properties. When an external stimuli is applied to these materials (heat), they have the ability to form a temporary phase that has a Young’s modulus orders of magnitude lower than its original state. The material can then be re- shaped, deformed or conform to any object until the stimuli is removed, at which point the Young’s modulus returns to its original state and the temporary geometric configuration is retained. Re-applying the stimulus will trigger a response in its molecular network, which induces a recovery of its original shape. By using mCPSOB in an inverted top-emitting OLED architecture, high performance green-emitting OLEDs are demonstrated on SMP substrates that define the state-of-the-art in performance for deformable light-emitting devices. The combination of the unique properties of SMP substrates with the light-emitting properties of OLEDs pave to the way for new class of applications, including conformable smart skin devices, minimally invasive biomedical devices, and flexible lighting/display technologies.
APA, Harvard, Vancouver, ISO, and other styles
5

Knauer, Keith Anthony. "High-performance single-unit and stacked inverted top-emitting electrophosphorescent organic light-emitting diodes." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/53480.

Full text
Abstract:
This thesis reports on the design, fabrication, and testing of state-of-the-art, high-performance inverted top-emitting organic light-emitting diodes (OLEDs). The vast majority of research reports focuses on a device architecture referred to as a conventional OLED which has its anode on the bottom of the device and its cathode on the top. Moreover, most conventional OLEDs are bottom-emitting such that light exits the structure through both a semitransparent bottom electrode of indium-tin oxide and a glass substrate. The particular device architecture developed in this thesis is one in which the devices are inverted (i.e. their cathode is on the bottom as opposed to on top) and top-emitting. Despite the advantages that inverted top-emitting OLEDs possess over conventional bottom-emitting OLEDs, their development has been relatively slow. This is because inverted OLEDs have traditionally been hampered by the difficulty of injecting electrons effectively into the device. In this work, a novel method of injecting electrons from bottom cathodes into inverted OLEDs is discovered. In several previous reports, bottom Al/LiF cathodes had been used with the electron-transport material Alq3 to produce inverted OLEDs, but the resulting inverted OLEDs exhibited inferior performance to conventional OLEDs with top cathodes of Al/LiF. A new route for the development of highly efficient inverted OLEDs is shown through the use of electron-transport materials with high electron mobility values and large electron affinities. After systematic device optimization, inverted top-emitting OLEDs are demonstrated that currently define the state-of-the-art in terms of device efficiency. Optimized green and blue inverted top-emitting OLEDs are demonstrated that have a current efficacies of 92.5 cd/A and 32.0 cd/A, respectively, at luminance values exceeding 1,000 cd/m2. Finally, this discovery has enabled the development of the first stacked inverted top-emitting OLEDs ever made, combining all of the advantages offered by an inverted architecture, a top-emissive design, and a stacked structure. These OLEDs have a current efficacy of 200 cd/A at a luminance of 1011 cd/m2, attaining a maximum current efficacy of 205 cd/A at luminance of 103 cd/m2.
APA, Harvard, Vancouver, ISO, and other styles
6

Hamer, Bastiaan. "Performance evaluation and development of contact solutions for flexible organic solar cells." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-19742.

Full text
Abstract:
In today’s society many non-renewable and environmentally harming energy sources are used to facilitate people’s everyday energy demands. This causes ecosystems to break down, global temperatures to rise, pollution and many more critical long lasting problems. By replacing non-renewable energy sources and taking advantage of the 100% renewable energy source, light, these problems will diminish. This project has been in collaboration with a company called Epishine who develop indoor organic solar cell devices to be able to replace conventual battery driven electrical devices with solar power harvested from indoor light. Since there is no good existing contacting solution, for Epishine to be able to enter the market, a contact solution between their solar cell device and the electrical devices it will power has to be developed. This thesis focuses on developing, designing, testing and evaluating the performance of new contact solutions for encapsulated flexible organic printed solar cells with the feasibility, viability, scalability and durability in focus. This project was conducted by first performing a literature study, thereafter, establishing a baseline for future referencing of new contact solutions and the main part, developing new concepts and evaluating them. By using the design thinking method, an iterative process could take place, allowing for a constant flow of new ideas whilst testing concepts throughout the project. The baseline tests were successful and the hypothesis of organic materials degrading over time was confirmed. From the many sub-concepts and production methods for a new contacting solution, two concepts showed promising results and were merged into one main concept. Two devices were created with the new concept, one functional device and one showing the design. To conclude, the thesis resulted in a functional solar cell device with a new contact solution which shows great potential and a new production method which enables all organic printed electronics to be design and developed in a more compact and component dense design. This production method is beneficial to not only Epishine, but everywhere where printed electronics are used and need to be optimized due to restrictions such as space and weight.
I dagens samhälle används många icke-förnybara energikällor för att underlätta människans vardagliga behov men skadar samtidigt miljön. Detta leder till att hela ekosystem fallerar, den globala temperaturen stiger, giftiga ämnen släpps fria och flera kritiska, långvariga problem skapas. Genom att byta ut icke-förnybara energikällor och istället dra nytta av den 100 % förnybara energikällan, ljus, kommer dessa ovanstående problem att minska. Detta projekt har varit i samarbete med ett företag vid namn Epishine som utvecklar organiska solcellsenheter för inomhusbruk, för att kunna ersätta konventionella batteridrivna elektriska apparater med solenergi tillvaratagen av inomhusbelysning. I dagsläget finns det ingen bra kontaktlösning mellan solcellsenheten och den apparat den ska driva, vilket är ett av Epishines större problem i nuläget, som hindrar dem från att kunna slå igenom på marknaden. Denna avhandling fokuserar på att utveckla, designa, testa och utvärdera prestandan av nya kontaktlösningar för inkapslade flexibla organiska solceller. Projektet började med en litteraturstudie, därefter etablerades en ”baseline” för att kunna jämföra de nya kontaktlösningarna. Största delen av rapporten handlar om att utveckla och testa nya kontaktlösningar för att sedan utvärdera dem. Genom att använda ”Design thinking” processen, kunde en iterativ process äga rum, vilket möjliggjorde ett konstant flöde med nya idéer som genererades samtidigt som koncept och prototyper utvecklades och utvärderades. Resultaten av ”baseline”-testerna var framgångsrika och hypotesen om att de konduktiva egenskaperna av organiska material försämras med tiden bekräftades. Från alla delkoncept och potentiella produktionsmetoderna för en ny kontaktlösning visade två koncept lovande resultat och slogs därför samman till ett huvudkoncept. Två olika solcellsenheter skapades med den nya kontaktlösningen implementerad. En funktionell enhet skapades och en enhet som visar layouten och designen. Sammanfattningsvis resulterade avhandlingen i en funktionell solcellsenhet med en ny kontaktlösning som visar stor potential samt en ny produktionsmetod som gör att all organisk tryckt elektronik kan designas och tillverkas i en mer kompakt och komponenttät design. Denna produktionsmetod är en fördel inte bara för Epishine utan också överallt där tryckt elektronik används och behöver optimeras i form av utrymme och vikt.
APA, Harvard, Vancouver, ISO, and other styles
7

Travaglini, Lorenzo. "In-situ detection of defect formation in organic flexible electronics by Kelvin Probe Force Microscopy." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/10380/.

Full text
Abstract:
Organic semiconductor technology has attracted considerable research interest in view of its great promise for large area, lightweight, and flexible electronics applications. Owing to their advantages in processing and unique physical properties, organic semiconductors can bring exciting new opportunities for broad-impact applications requiring large area coverage, mechanical flexibility, low-temperature processing, and low cost. In order to achieve highly flexible device architecture it is crucial to understand on a microscopic scale how mechanical deformation affects the electrical performance of organic thin film devices. Towards this aim, I established in this thesis the experimental technique of Kelvin Probe Force Microscopy (KPFM) as a tool to investigate the morphology and the surface potential of organic semiconducting thin films under mechanical strain. KPFM has been employed to investigate the strain response of two different Organic Thin Film Transistor with active layer made by 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-Pentacene), and Poly(3-hexylthiophene-2,5-diyl) (P3HT). The results show that this technique allows to investigate on a microscopic scale failure of flexible TFT with this kind of materials during bending. I find that the abrupt reduction of TIPS-pentacene device performance at critical bending radii is related to the formation of nano-cracks in the microcrystal morphology, easily identified due to the abrupt variation in surface potential caused by local increase in resistance. Numerical simulation of the bending mechanics of the transistor structure further identifies the mechanical strain exerted on the TIPS-pentacene micro-crystals as the fundamental origin of fracture. Instead for P3HT based transistors no significant reduction in electrical performance is observed during bending. This finding is attributed to the amorphous nature of the polymer giving rise to an elastic response without the occurrence of crack formation.
APA, Harvard, Vancouver, ISO, and other styles
8

Purandare, Sumit. "Highly Efficient Phosphorescent Organic Light Emitting Diodes on Cellulose." University of Cincinnati / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1396532894.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tobin, Vincent. "Roll-to-roll deposition of highly flexible organic-inorganic barrier layers for printed electronics and photovoltaics." Thesis, University of Oxford, 2018. https://ora.ox.ac.uk/objects/uuid:d6ea9bcb-171d-4fc6-95e4-51d0e8d4351a.

Full text
Abstract:
This thesis investigates how to improve transparent flexible water vapour barriers by understanding how water permeates through them. The barriers consisted of a reactively sputtered aluminium oxide coating on an industrial-grade polypropylene substrate. Some also incorporated a di-acrylate smoothing layer. Key deposition conditions were studied and optimised for permeation and visible-light transparency: sputtering power, thickness & sequential deposition rate. One of the main deposition conditions corresponded to increasing coating nitrogen content in order to induce barrier-water interaction. The final investigation consisted of including acrylate layers in different barrier stacking combinations. It was found that thin, high sputter power coatings formed the best barriers to permeation. This was due to denser packing of the oxide and the inclusion of fewer macro-defects (large defects allowing unhindered permeation) and nano-defects (defects small enough to cause the permeant to interact with the coating). No clear benefit to permeation was found from the inclusion of nitrogen, but refractive index was seen to increase and the oxynitride coatings mechanically failed at a greater force than the oxides. This case illustrated the importance of considering the role of permeation through nano-defects: although a high activation energy was achieved for the nitrogen containing films, possibly suggesting greater interaction between the water vapour and the barrier, the amount of permeation was not reduced as the nitrogen gave rise to increased permeation due to nano-defects, thus changing the processing and chemistry can affect both the macro-defect and nano-defect permeation. Smoothing layers were found to reduce the permeation rate by covering large substrate features, thus allowing rough substrates to be used even for high barriers. Although a coating of acrylate on top of a barrier oxide showed no improvement, a 1-2-1-2 stack of smoothing layer (1) and oxide (2) was found to exhibit a large delay in the onset of permeation.
APA, Harvard, Vancouver, ISO, and other styles
10

Ding, Ziqian. "Large area vacuum fabrication of organic thin-film transistors." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:e7decca4-14e3-47e7-85ca-0bb14755f282.

Full text
Abstract:
A process has been developed to make the dielectric layer for organic thin-film transistors (OTFTs) in a roll-to-roll vacuum web coater environment. This dielectric layer combined with an organic semiconductor layer and metal layer deposited in vacuum allows a solvent-free process to make organic/inorganic multilayer structures for thin-film electronic devices on a flexible substrate at, potentially, high speed. The polymeric gate dielectric layers were fabricated by flash evaporation of acrylic monomers onto a polymer film with pre-patterned metal gates followed by radiation curing by electron beam, ultra-violent light (UV) or plasma. With a non-polar dielectric surface, charge carrier mobility (μ) of 1 cm2-V-1s-1; on/off curren ratio of 108, sub-threshold swing (SS) of 0.3 V/decade and saturated output curve were routinely achieved in dinaphtho-[2,3-b:2'3'-f]thieno[3,2-b]thiophene (DNTT) transistors with dielectric layer of tripropylene glycol diacrylate (TPGDA) of ~400 nm. Apart from the TPGDA, monomer formulas including 1,6-Hexanediol diacrylate (HDDA) as well as several commercial acrylic resins have been used to make the dielectric layer. The highest areal capacitance of 41nF-cm-2 was achieved with a pin-hole free film of less than 100 nm made of an acrylate mixture resin. A non-polar dielectric surface treatment layer has been developed based on flash evaporation of lauryl acrylate and HDDA mixture. The transistors with the buffer layer showed constant performance and a mobility fivefold greater than those of untreated samples. The effect of humidity, oxygen, and light during switching cycles of both pentacene and DNTT transistors were studied. Water and oxygen/illumination had a distinct effect on both pentacene and DNTT transistors. Oxygen leads to acceptor-like charge traps under illumination, which shifted the turn-on voltage (Vto) to more positive values. In contrast, water in transistors gave rise to donor-like charge traps, which shifted the Vto and the threshold voltage (VT) more negatively. The DNTT devices showed good stability in dry air without encapsulation, while pentacene transistors degraded with either repeating measurement or long term storage. A DNTT transistor with a PS-coated TPGDA dielectric layer showed stable drain current (Id) of ~105A under bias stress of the gate voltage (em>Vg) of -20V and the drain voltage (em>Vd) of -20V for at least 144 hours. The Vto shift after the stress was less than 5 V and was recoverable when the device was kept in dry air for a few days. Possible reasons for the Vto shift have been discussed.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Organic flexible electronics"

1

Organic Flexible Electronics. Elsevier, 2021. http://dx.doi.org/10.1016/c2018-0-04244-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Handbook of Flexible Organic Electronics. Elsevier, 2015. http://dx.doi.org/10.1016/c2013-0-16442-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cosseddu, Piero, and Mario Caironi. Organic Flexible Electronics: Fundamentals, Devices, and Applications. Elsevier Science & Technology, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Forrest, Stephen R. Organic Electronics. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198529729.001.0001.

Full text
Abstract:
Organic electronics is a platform for very low cost and high performance optoelectronic and electronic devices that cover large areas, are lightweight, and can be both flexible and conformable to irregularly shaped surfaces such as foldable smart phones. Organics are at the core of the global organic light emitting device (OLED) display industry, and also having use in efficient lighting sources, solar cells, and thin film transistors useful in medical and a range of other sensing, memory and logic applications. This book introduces the theoretical foundations and practical realization of devices in organic electronics. It is a product of both one and two semester courses that have been taught over a period of more than two decades. The target audiences are students at all levels of graduate studies, highly motivated senior undergraduates, and practicing engineers and scientists. The book is divided into two sections. Part I, Foundations, lays down the fundamental principles of the field of organic electronics. It is assumed that the reader has an elementary knowledge of quantum mechanics, and electricity and magnetism. Background knowledge of organic chemistry is not required. Part II, Applications, focuses on organic electronic devices. It begins with a discussion of organic thin film deposition and patterning, followed by chapters on organic light emitters, detectors, and thin film transistors. The last chapter describes several devices and phenomena that are not covered in the previous chapters, since they lie outside of the current mainstream of the field, but are nevertheless important.
APA, Harvard, Vancouver, ISO, and other styles
5

Organic and Amorphous-Metal-Oxide Flexible Analogue Electronics. Cambridge University Press, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Logothetidis, Stergios. Handbook of Flexible Organic Electronics: Materials, Manufacturing and Applications. Elsevier Science & Technology, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fruehauf, Norbert, Babu R. Chalamala, Bruce E. Gnade, and Jin Jang. Flexible Electronics 2004: Materials and Device Technology. University of Cambridge ESOL Examinations, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

(Editor), N. Fruehauf, B. R. Chalamala (Editor), and B. E. Gnade (Editor), eds. Flexible Electronics--Materials and Device Technology: Volume 769. Materials Research Society, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Norbert, Fruehauf, and Materials Research Society Meeting, eds. Flexible electronics--materials and device technology: Symposium held April 22-25, 2003, San Francisco, California, U.S.A. Warrendale, Pa: Materials Research Society, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Norbert, Fruehauf, and Materials Research Society Meeting, eds. Flexible electronics 2004--materials and device technology: Symposium held April 13-16, 2004, San Francisco, California, U.S.A. Warrendale, Pa: Materials Research Society, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Organic flexible electronics"

1

MacDonald, William A. "Advanced Flexible Polymeric Substrates." In Organic Electronics, 163–79. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527608753.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Scully, Shawn R., and Michael D. McGehee. "Physics and Materials Issues of Organic Photovoltaics." In Flexible Electronics, 329–71. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Apte, Raj B., Robert A. Street, Ana Claudia Arias, Alberto Salleo, Michael Chabinyc, William S. Wong, Beng S. Ong, Yiliang Wu, Ping Liu, and Sandra Gardner. "Printed Organic Electronics." In Flexible Flat Panel Displays, 219–43. Chichester, UK: John Wiley & Sons, Ltd, 2005. http://dx.doi.org/10.1002/0470870508.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kane, Michael G. "Organic and Polymeric TFTs for Flexible Displays and Circuits." In Flexible Electronics, 215–60. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Koga, Hirotaka, and Masaya Nogi. "Flexible Paper Electronics." In Organic Electronics Materials and Devices, 101–15. Tokyo: Springer Japan, 2015. http://dx.doi.org/10.1007/978-4-431-55654-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Usta, Hakan, and Antonio Facchetti. "Organic Semiconductors for Transparent Electronics." In Flexible Carbon-based Electronics, 13–49. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527804894.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liao, Caizhi, and Feng Yan. "Flexible Organic Bioelectronics and Biosensors." In Flexible Carbon-based Electronics, 289–310. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527804894.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lee, Seung-Hoon, Yong Xu, and Yong-Young Noh. "Polymer and Organic Nonvolatile Memory Devices." In Large Area and Flexible Electronics, 381–410. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527679973.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kang, Moon Sung, Jeong Ho Cho, and Se Hyun Kim. "Electrolyte-Gating Organic Thin Film Transistors." In Large Area and Flexible Electronics, 253–74. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527679973.ch8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Huitema, Edzer, Gerwin Gelinck, Erik van Veenendaal, Fred Touwslager, and Pieter van Lieshout. "Rollable Active Matrix Displays with Organic Electronics." In Flexible Flat Panel Displays, 245–62. Chichester, UK: John Wiley & Sons, Ltd, 2005. http://dx.doi.org/10.1002/0470870508.ch13.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Organic flexible electronics"

1

Sircar, Aenakshi. "Organic Thin Film Transistors for Flexible Electronics." In International Conference on Women Researchers in Electronics and Computing. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.114.61.

Full text
Abstract:
Progress in electronics gave rise to the concept of flexible electronics. Which are widely being used for medical and aerospace research. Further development in the fields of flexible electronics unfolded another branch of this electronics system called organic flexible electronics. Organic thin-film transistors, Organic light-emitting diodes are a few of the many forms of organic flexible electronics. Organic materials being used as the substrates increase the flexibility of the electronic circuit. The conductivity of these substrates can be controlled as per requirement by varying the doping concentration of the substrate. The cost of production of organic flexible electronics is low as compared to electronics circuits using a silicon substrate. This paper illustrates the various properties of organic materials and their applications and suitability in flexible electronics.
APA, Harvard, Vancouver, ISO, and other styles
2

Cho, Kilwon. "Soft Organic Electronics Based on Graphene Electrodes." In 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583993.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Harkema, Stephan, Raghu K. Pendyala, Christian G. Geurts, Paul L. Helgers, Jack W. Levell, Joanne S. Wilson, and Duncan MacKerron. "Light management in flexible OLEDs." In SPIE Organic Photonics + Electronics, edited by Franky So and Chihaya Adachi. SPIE, 2014. http://dx.doi.org/10.1117/12.2061777.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Jang-Joo, Jeong-Hwan Lee, Ji Whan Kim, Sei-Yong Kim, Seung-Jun Yoo, Po-Sheng Wang, and Chih-I. Wu. "Inverted OLEDs for flexible displays." In SPIE Organic Photonics + Electronics, edited by Franky So and Chihaya Adachi. SPIE, 2012. http://dx.doi.org/10.1117/12.977831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Leo, Karl. "Flexible organic devices: Towards ubiquitous electronics." In 2012 IEEE Technology Time Machine (TTM). IEEE, 2012. http://dx.doi.org/10.1109/ttm.2012.6509077.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Facchetti, Antonio, Sanghyun Ju, David Janes, Brooks Jones, Michael Wasielewski, and Tobin J. Marks. "Organic-Inorganic Flexible and Transparent Electronics." In Displays conference and Exhibition. IEEE, 2008. http://dx.doi.org/10.1109/fedc.2008.4483880.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Minakata, Takashi, Mitsuru Tanamura, Yasuhiro Mitamura, Masayuki Imashiro, Akira Horiguchi, Akira Sugimoto, Masahiko Yamashita, et al. "R2R processed flexible OLEDs for lighting." In SPIE Organic Photonics + Electronics, edited by Franky So, Chihaya Adachi, and Jang-Joo Kim. SPIE, 2015. http://dx.doi.org/10.1117/12.2188950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Park, Yoonseok, Jana Berger, Paul-Anton Will, Marcos Soldera, Bernhard Glatz, Lars Müller-Meskamp, Kurt Taretto, et al. "Light trapping for flexible organic photovoltaics." In SPIE Organic Photonics + Electronics, edited by Zakya H. Kafafi, Paul A. Lane, and Ifor D. W. Samuel. SPIE, 2016. http://dx.doi.org/10.1117/12.2229582.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Jong-Lam, and Kisoo Kim. "Metal substrates with nanometer scale surface roughness for flexible electronics." In SPIE Organic Photonics + Electronics, edited by Franky So and Chihaya Adachi. SPIE, 2012. http://dx.doi.org/10.1117/12.928659.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tan, Songting, and Zhuliang Yuan. "Blue Electroluminescent Copolymers Containing Fluorene and Flexible Segments." In Organic Photonics and Electronics. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/ope.2006.optud10.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Organic flexible electronics"

1

Lee, Charles Y., and Klaus Dimmler. Organic Based Flexible Transistors and Electronic Device. Fort Belvoir, VA: Defense Technical Information Center, May 2005. http://dx.doi.org/10.21236/ada434601.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Organic flexible electronics' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography