Academic literature on the topic 'Organic monolith'

AbstractPolymer monoliths modified by using nanoparticles (NPs) integrate high NP specific surface area with different monolith surface chemistry and high porosity. As a result, they have extensive applications within different fields, whereas nanomaterial-functionalised porous polymer monoliths have elicited considerable interest from investigators. This study is aimed at fabricating organic polymer-based monoliths from polybutyl methacrylate-co-ethylenedimethacrylate (BuMA-co-EDMA) monoliths prior to immobilization of gold or silver metal on the pore surface of the monoliths using reducing reagent (extracts of lemon peels). This was intended to denote a sustainable technique of immobilizing nanoparticles that are advantageous over physical and chemical techniques because it is safe in terms of handling, readily available, environmentally friendly, and cheap. Two different methods were used in the study to effectively immobilize nanoparticles on monolithic components. The outcomes showed that soaking the monolith rod in the prepared nano solution directly and placing it within ovens at temperatures of 80°C constituted the most effective method. Characterisation of the fabricated monolith was undertaken using SEM/EDX analysis, UV-vis. spectra analysis, and visual observation. The SEM analysis showed that nanoparticles were extensively immobilised on the surface polymers. Another peak was attained through EDX analysis, thus confirming the Au atom existence at 2.83% alongside another peak that proved the Ag atom existence at 1.92%. The fabricated components were used as sorbents for purifying protein. The ideal performance was achieved using gold nanoparticles (GNPs) immobilised organic monolith that attained a greater pepsin extraction recovery compared to silver nanoparticles (SNPs) immobilised organic monoliths alongside bare organic-based monolith.

A product-scalable, catalytically mediated flow system has been developed to perform Suzuki–Miyaura reactions under a microwave heating regime, in which the volumetric throughput of a Pd-supported silica monolith can be used to increase the quantity of the product without changing the optimal operating conditions. Two silica monoliths (both 3 cm long), with comparable pore diameters and surface areas, were fabricated with diameters of 3.2 and 6.4 mm to give volumetric capacities of 0.205 and 0.790 mL, respectively. The two monoliths were functionalized with a loading of 4.5 wt % Pd and then sealed in heat-shrinkable Teflon® tubing to form a monolithic flow reactor. The Pd-supported silica monolith flow reactor was then placed into the microwave cavity and connected to an HPLC pump and a backpressure regulator to minimize the formation of gas bubbles. The flow rate and microwave power were varied to optimize the reactant contact time and temperature, respectively. Under optimal reaction conditions the quantity of product could be increased from 31 mg per hour to 340 mg per hour simply by changing the volumetric capacity of the monolith.

Porous organosilica monoliths have attracted much attention from both the academic and industrial fields due to their porous structure; excellent mechanical property and easily functionalized surface. A new mercapto-functionalized silicone monolith from a precursor mixture containing methyltrimethoxysilane; 3-mercaptopropyltrimethoxysilane; and 3-mercaptopropyl(dimethoxy)methylsilane prepared via a two-step acid/base hydrolysis–polycondensation process was reported. Silane precursor ratios and surfactant type were varied to control the networks of porous monolithic gels. Gold nanoparticles were loaded onto the surface of the porous organosilica monolith (POM). Versatile characterization techniques were utilized to investigate the properties of the synthesized materials with and without gold nanoparticles. Scanning electron microscopy was used to investigate the morphology of the as-synthesized porous monolith materials. Fourier transform infrared spectroscopy was applied to confirm the surface chemistry. 29Si nuclear magnetic resonance was used to investigate the hydrolysis and polycondensation of organosilane precursors. Transmission electron microscopy was carried out to prove the existence of well-dispersed gold nanoparticles on the porous materials. Ultraviolet–visible spectroscopy was utilized to evaluate the high catalytic performance of the as-synthesized Au/POM particles

AbstractA unique method was used to synthesize extremely stable silver stearate nanoparticles (AgStNPs) incorporated in an organic-based monolith. The facile strategy was then used to selectively isolate hemeproteins, myoglobin (Myo) and hemoglobin (Hb). Ethyl alcohol, silver nitrate, and stearic acid were, respectively, utilized as reducing agents, silver precursors, and capping agents. The color changed to cloudy from transparent, indicating that AgStNPs had been formed. AgStNP nanostructures were then distinctly integrated into the natural polymeric scaffold. To characterize the AgStNP–methacrylate polymeric monolith and the silver nanoparticles, energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), and Fourier-transform infrared (FT-IR) spectroscopy were used. The results of the SEM analysis indicated that the AgStNP–methacrylate polymeric monolith’s texture was so rough in comparison with that of the methacrylate polymeric monolith, indicating that the extraction process of the monolith materials would be more efficient because of the extended surface area of the absorbent. The comparison between the FT-IR spectra of AgStNPs, the bare organic monolith, and AgStNP–methacrylate polymeric monolith confirms that the AgStNPs were immobilized on the surface of the organic monolith. The EDX profile of the built materials indicated an advanced peak of the Ag sequence which represented an Ag atom of 3.27%. The results therefore established that the AgStNPs had been successfully integrated into the monolithic materials. Extraction efficiencies of 92% and 97% were used to, respectively, recover preconcentrated Myo and Hb. An uncomplicated method is a unique approach of both fabrication and utilization of the nanosorbent to selectively isolate hemeproteins. The process can further be implemented by using other noble metals.

Soil monoliths were used to determine the effects of organic horizon removal, ash, water regime, and shading on red pine (Pinusresinosa Ait.) seedling emergence. Soil monoliths were collected from a jack pine (Pinusbanksiana Lamb.) stand and taken to the laboratory for prescribed burning, leading to 25%, 50%, 75%, and 100% organic horizon removal. One half of each monolith contained ash generated from burning, while the other half was kept ash-free. Each half of every monolith was sown with red pine seeds. The monoliths were then placed in a greenhouse and, in separate experiments, were exposed to different water regimes and shade regimes. Red pine seedling emergence was highest under high water regimes, increased shade regimes, and increased organic horizon removal. Seedling emergence was reduced by the presence of ash.

Boronate affinity chromatography (BAC) is argued to be a critical tool in specific capture and separation of cis-diol containing compounds. In present study, organic boronate affinity monolith poly(3-acrylamido phenylboronic acid-co-ethylene dimethacrylate) (AAPBA-co-EDMA) is prepared through one-step in situ polymerization procedure within a micropipette through the application of a pre-polymerization mixture which contains functional monomer (3-acrylamido phenylboronic acid), cross-linker (ethylene dimethacrylate), porogenic solvent (methanol with poly ethylene glycol) and initiator (2,2-dimethoxy-2-phenyl-acetophenone). Following the optimization of time exposure to UV lamp with 365 nm, the macroporous organic boronate monolith was selected. Several approaches including SEM and BET analysis, FT-IR spectroscopy and measuring contact angle were applied in the characterization of the morphology of the monolith. Several cis-diol compounds that include catechol and galactose are applied in the assessment of the boronate affinity of the organic monolithic material. Additionally, the capture of glucose from urine sample is also conducted. The basic principle of the approach is that boronic acid forms covalent bond with cis-diols in basic solutions whereas the ester bonds are dissociated under acidic media. By using the study results, monolith demonstrate good selectivity towards cis-diol containing compounds. Due to the hydrophilic property of monolith, the affinity chromatography monolith can be performed for several cis-diol compounds including glycoproteins and nucleosides. Also, fabrication of the organic boronate monolithic in microfluidic equipment is essential in facilitating the extraction of boronate affinity using small-volume samples.

Transparent crack-free lithiated sol–gel scintillating monoliths were developed by taking advantage of a sealed container system for a syneresis and the π–π interactions between sol–gel components and organic fluors to yield a better homogeneity and scintillating efficiency. The transparency of the resulting materials indicates that the new scintillating material composites are mesoscopically dispersed. The silica monolith can be prepared without cladding the monolith with an engineering plastic such as a poly(ether ether ketone) (PEEK) or a liquid mounting medium. A successful detection of neutron particles by using these lithiated scintillating monoliths was demonstrated.

Transparent crack-free lithiated sol–gel scintillating monoliths were developed by taking advantage of a sealed container system for a syneresis and the π–π interactions between sol–gel components and organic fluors to yield a better homogeneity and scintillating efficiency. The transparency of the resulting materials indicates that the new scintillating material composites are mesoscopically dispersed. The silica monolith can be prepared without cladding the monolith with an engineering plastic such as a poly(ether ether ketone) (PEEK) or a liquid mounting medium. A successful detection of neutron particles by using these lithiated scintillating monoliths was demonstrated.

This review article is aimed at summarizing the various strategies that have been developed so far for post-polymerization functionalization (PPF) of organic polymer-based monoliths used in liquid phase separation techniques, namely HPLC at all scales and capillary electrochromatography (CEC). The reader will find the organic reactions performed on monolithic columns for grafting the chromatographic ligands needed for solving the separation problems on hand. This process involves therefore the fabrication of template monoliths that carry reactive functional groups to which chromatographic ligands can be covalently attached in a post-polymerization kind of approach. That is, the template monolith that has been optimized in terms of pore structure and other morphology can be readily modified and tailor made on column to fit a particular separation. The review article will not only cover the various strategies developed so far but also describe their separation applications. To the best of our knowledge, this review article will be the first of its kind.

Localized eddy current heating delivered by metal foam embedded in a MOF monolith provides a novel, low-cost, and energy efficient way to overcome the thermal insulation nature of MOF monoliths and realize their highly efficient regenerations.

This dissertation focuses on improving the chromatographic efficiency of polymeric organic monoliths by characterizing and optimizing the bed morphology. In-situ characterization techniques such as capillary flow porometry (CFP), 3-dimensional scanning electron microscopy (3D SEM) and conductivity measurements were developed and implemented to quantitatively characterize the morphology of poly(ethylene glycol) diacrylate (PEGDA) monoliths. The CFP measurements for monoliths prepared by the same procedure in capillaries with different diameters (i.e., 75, 150, and 250 μm) clearly showed a change in average through-pore size with capillary diameter, thus, certifying the need for in-situ measurement techniques. Serial sectioning and imaging of PEGDA monoliths using 3D SEM gave quantitative information about the average pore size, porosity, radial heterogeneity and tortuosity of the monolith. Chromatographic efficiency was better for a monolith with smaller average pore size (i.e., 5.23 μm), porosity (i.e., 0.49), radial heterogeneity (i.e., 0.20) and tortuosity (i.e., 1.50) compared to another monolith with values of 5.90 μm, 0.59, 0.50 and 2.34, respectively. Other than providing information about monolith morphology, these techniques also aided in identifying factors governing morphological changes, such as capillary diameter, polymerization method, physical/chemical properties of the pre-polymer constituents and weight proportion of the same. A statistical model was developed for optimizing the weight proportion of pre-polymer constituents from their physical/chemical properties for improved chromatographic efficiency. Fabricated PEGDA columns were used for liquid chromatography of small molecules such as phenols, hydroxyl benzoic acids, and alkyl parabens. The chromatographic retention mechanism was determined to be principally reversed-phase (RP) with additional hydrogen bonding between the polar groups of the analytes and the ethylene oxide groups embedded in the monolith structure. The chromatographic efficiency measured for a non-retained compound (uracil) was 186,000 plates/m when corrected for injector dead volume. High resolution gradient separations of selected pharmaceutical compounds and phenylurea herbicides were achieved in less than 18 min. Column preparation was highly reproducible, with relative standard deviation (RSD) values less than 2.1%, based on retention times of the phenol standards (3 different columns). A further improvement in chromatographic performance was achieved for monoliths fabricated using a different polymerization method, i.e., living free-radical polymerization (LFRP). The columns gave an unprecedented column performance of 238, 000 plates/m for a non-retained compound under RP conditions.

Abstract The harmful emissions of chlorinated volatile organic compounds (CVOCs) originate only from man-made sources. CVOCs are used in a variety of applications from pharmaceuticals production to decaffeination of coffee. Currently, CVOC emissions are limited by strict legislation. For these reasons, efficient CVOC abatement technologies are required. Catalytic oxidation is very promising option for this purpose, since catalysts can be tailored to each case to maximize the efficiency and minimize the formation of unwanted products, such as dioxins or Cl2. The goal of this thesis was to study the role of the physico-chemical properties of catalysts in dichloromethane (DCM) oxidation. To reach the aim, several catalytic materials were prepared and characterized, and their performance was tested in total oxidation of DCM. The catalytic materials used were powders of four single metal oxides (γ-Al2O3, TiO2, CeO2, MgO), three mixed oxides (Al2O3-xSiO2) washcoated on a cordierite monolith and four active phases (Pt, Cu, V, Mn). At first, support properties were studied. It was found that the DCM conversion and HCl production are dependent on support acidity when the studied single oxides are considered. The best DCM conversions and HCl yields were observed with the support having the highest total acidity (γ-Al2O3). Further, the quality of the by-products formed was dependent on the type of the acid sites present on the support surface. Secondly, the impregnation of the active compound was observed to improve the selectivity of the material. From the tested active phases, Pt presented the best performance, but also V2O5 and CuO showed almost equal performances. Especially CuO supported on γ-Al2O3, that had less formation of by-products and is less toxic than V-containing oxides, seems to be a promising alternative to Pt. Concerning stability, no deactivation was observed after 55h of testing of Pt/Al2O3. Furthermore, in the used reaction conditions, the formation of CuCl2 is not thermodynamically favoured. Finally, the good characteristics of the powder form catalysts were successfully transferred to the monolith. The performance of the Pt/90Al2O3-10SiO2 catalyst in DCM oxidation was improved when the channel density was increased due to an increase in geometric surface area and mechanical integrity factor, and a decrease in open fraction area and thermal integrity factor
Tiivistelmä Haitallisten kloorattujen orgaanisten yhdisteiden (CVOC) päästöt ovat ihmisten aiheuttamia. CVOC-yhdisteitä käytetään mm. liuottimina lääkeaineiden valmistuksessa ja kofeiinin poistossa. Nykyisin CVOC-päästöjä rajoitetaan tiukalla lainsäädännöllä. Näistä syistä tehokas CVOC-yhdisteiden käsittelymenetelmä on tarpeen. Katalyyttinen hapetus on hyvä vaihtoehto tähän tarkoitukseen, koska katalyytit voidaan räätälöidä niin, että puhdistuksen tehokkuus saadaan maksimoitua samalla kun ei-haluttujen tuotteiden, kuten dioksiinit ja kloorikaasu, muodostuminen voidaan minimoida. Tämän väitöskirjatyön tavoitteena oli selvittää katalyyttien fysikaalis-kemiallisten ominaisuuksien yhteyksiä dikloorimetaanin (DCM) hapetukseen. Tavoitteen saavuttamiseksi valmistettiin useita katalyyttejä, jotka karakterisoitiin ja testattiin DCM:n kokonaishapetuksessa. Työssä tutkittiin neljää jauhemaista metallioksidia (γ-Al2O3, TiO2, CeO2 ja MgO), kolmea metallioksidiseosta (Al2O3-xSiO2), jotka pinnoitettiin kordieriittimonoliitille, sekä neljää aktiivista ainetta: Pt, Cu, V and Mn. Aluksi työssä keskityttiin tukiaineiden ominaisuuksiin. Työn tulokset osoittivat, että DCM:n konversio ja HCl:n tuotanto ovat riippuvaisia tukiaineen happamuudesta. Paras tulos saavutettiin alumiinioksidilla, jolla oli korkein kokonaishappamuus. Lisäksi havaittiin, että sivutuotteiden laatu riippuu tukiaineen pinnalla olevien happopaikkojen tyypistä. Aktiivisen aineen impregnointi tukiaineeseen paransi materiaalin selektiivisyyttä. Tutkituista aineista Pt osoittautui parhaimmaksi, mutta myös V2O5 ja CuO olivat lähes yhtä hyviä. Erityisesti CuO-katalyytti, joka tuotti vähemmän sivutuotteita ja joka on materiaalina vähemmän haitallinen kuin V2O5, osoittautui lupaavaksi jalometallikatalyyttien korvaajaksi. Materiaalien stabiilisuuteen liittyen Pt/Al2O3-katalyytin toiminnassa ei havaittu muutoksia 55 tunnin testauksen jälkeen. Lisäksi CuCl2:n muodostuminen ei mallinnuksen mukaan ole termodynaamisesti todennäköistä tutkituissa reaktio-olosuhteissa. Jauhemaisen katalyytin hyvät ominaisuudet pystyttiin pinnoituksessa siirtämään monoliittirakenteiseen katalyyttiin. Pt/90Al2O3-10SiO2 -katalyytin aktiivisuus DCM:n hapetuksessa tehostui, kun monoliitin aukkoluku kasvoi aiheutuen suuremmasta geometrisestä pinta-alasta ja mekaanisesta eheystekijästä sekä pienemmästä avoimen pinnan osuudesta ja termisestä eheystekijästä

To date, there has been little research into the role of microbial community structure in the functioning of the soil ecosystem and on the links between microbial biomass size, microbial activity and key soil processes that drive nutrient availability. The maintenance of structural and functional diversity of the soil microbial community is essential to ensure the sustainability of agricultural production systems. Soils of the same type with similar fertility that had been under long-term organic and conventional crop management in Canterbury, New Zealand, were selected to investigate relationships between microbial community composition, function and potential environmental impacts. The effects of different fertilisation strategies on soil biology and nitrogen (N) dynamics were investigated under field (farm site comparison), semi-controlled (lysimeter study) and controlled (incubation experiments) conditions by determining soil microbial biomass carbon (C) and N, enzyme activities (dehydrogenase, arginine deaminase, fluorescein diacetate hydrolysis), microbial community structure (denaturing gradient gel electrophoresis following PCR amplification of 16S and 18S rDNA fragments using selected primer sets) and N dynamics (mineralisation and leaching). The farm site comparison revealed distinct differences between the soils in microbial community structure, microbial biomass C (conventional > organic) and arginine deaminase activity (organic > conventional). In the lysimeter study, the soils were subjected to the same crop rotation (barley (Hordeum vulgare L.), maize (Zea mays L.), rape (Brassica napus L. ssp. oleifera (Moench)) plus a lupin green manure (Lupinus angustifolius L.) and two fertiliser regimes (following common organic and conventional practice). Soil biological properties, microbial community structure and mineral N leaching losses were determined over 2½ years. Differences in mineral leaching losses were not significant between treatments (total organic management: 24.2 kg N per ha; conventional management: 28.6 kg N per ha). Crop rotation and plant type had a larger influence on the microbial biomass, activity and community structure than fertilisation. Initial differences between soils decreased over time for most biological soil properties, while they persisted for the enzyme activities (e.g. dehydrogenase activity: 4.0 and 2.9 µg per g and h for organic and conventional management history, respectively). A lack of consistent positive links between enzyme activities and microbial biomass size indicated that similarly sized and structured microbial communities can express varying rates of activity. In two successive incubation experiments, the soils were amended with different rates of a lupin green manure (4 or 8t dry matter per ha), and different forms of N at 100 kg per ha (urea and lupin) and incubated for 3 months. Samples were taken periodically, and in addition to soil biological properties and community structure, gross N mineralisation was determined. The form of N had a strong effect on microbial soil properties. Organic amendment resulted in a 2 to 5-fold increase in microbial biomass and enzyme activities, while microbial community structure was influenced by the addition or lack of C or N substrate. Correlation analyses suggested treatment-related differences in nutrient availability, microbial structural diversity (species richness or evenness) and physiological properties of the microbial community. The findings of this thesis showed that using green manures and crop rotations improved soil biology in both production systems, that no relationships existed between microbial structure, enzyme activities and N mineralisation, and that enzyme activities and microbial community structure are more closely associated with inherent soil and environmental factors, which makes them less useful as early indicators of changes in soil quality.

L'intérêt grandissant porté au cours de ces dix dernières années aux monolithes organiques pour des applications électroséparatives se justifie en partie par leur préparation aisée au sein de systèmes miniaturisés, le large choix des monomères précurseurs disponibles, ainsi que la possibilité d'ajuster les paramètres structuraux du matériau final par un contrôle judicieux des conditions opératoires. Au cours de ce travail, la synthèse de nouvelles phases monolithiques a été mise au point selon une stratégie en deux étapes. Dans une première étape, la copolymérisation radicalaire photo-initiée du Nacryloxysuccinimide avec le diméthacrylate d'éthylène glycol réalisée en présence de toluène, a permis l'élaboration de monolithes macroporeux réactifs et hautement perméables. La présence d'esters de succinimide dans la structure chimique du monolithe polymère a été mise à profit pour fonctionnaliser la surface du monolithe par des greffons de nature variée par réaction de substitution nucléophile faisant intervenir des dérivés aminés. Le choix judicieux des greffons a permis la mise au point rapide de phases stationnaires présentant des propriétés électrochromatographiques ciblées. Ainsi, le contrôle du caractère hydrophobe des supports obtenus par greffage d'alkylamines de taille variable a été mis en évidence par la séparation de dérivés benzéniques selon un mécanisme à polarité de phase inversée avec de très bonnes efficacités (200000 plateaux par mètre). L'utilisation de phases stationnaires monolithiques greffées par des sélecteurs aromatiques a été proposée comme alternative aux monolithes aliphatiques hydrophobes. La synthèse de monolithes organiques hydrophiles a été possible par la fonctionnalisation du support réactif par des alkyldiamines. La préparation d'une phase stationnaire chirale a été réalisée selon une approche originale de chimie click consistant à immobiliser un dérivé de cyclodextrine. Dans le but d'étendre l'application des monolithes à base de NAS au greffage de biomacromolécules, une nouvelle matrice monolithique incorporant dans sa structure chimique un co-monomère hydrophile a été élaborée. Les résultats préliminaires ont montré que l'augmentation du caractère hydrophile du squelette monolithique permet d'accroître sensiblement la réactivité des esters de Nhydroxysuccinimide en milieu aqueux

As part of the ongoing research efforts to discover alternative support materials to polymer beads for use in polymer-supported synthesis, particularly under flow-through, this project involved the synthesis of PolyHIPE (High Internal Phase Emulsion) polymer monoliths. PolyHIPEs containing high loadings of chloromethyl groups were efficiently prepared by the direct copolymerisation of 4-vinylbenzyl chloride and divinylbenzene monomers. As revealed by characterisation of the materials obtained, the VBC monomer hydrolysed to an extent during the polymerisation, replacing a small amount of the chloromethyl functionalities with hydroxymethyl groups. Functionalisation of the PolyHIPEs, in batch and flow-through reactions, produced supports with aminomethyl and hydroxymethyl linkers attached. Conversions were often higher as a result of the flow-through modifications. Capacities were increased further with the introduction of trisaminomethyl and trishydroxymethyl linkers, which showed potential as supports for polymer assisted solution phase (PASP) synthesis and solid phase organic synthesis (SPOS), respectively. Chloromethyl PolyHIPE was shown to be an excellent support for batch and flow-through Suzuki cross-coupling reactions. A remarkably high yield of pure biaryl product was obtained using PolyHIPE in cubic form and an electron-rich boronic acid. In comparison to polymer beads, PolyHIPE was found to be a much more efficient support in both batch and continuous flow modes. PolyHIPE converted a greater amount of chloromethyl groups into biaryl product under identical reaction conditions. Under flow, the channelling effect observed with the beads was completely eliminated with PolyHIPE monoliths. The utility of hydroxymethyl- fianctionalised PolyHIPEs (Wang and tris-OH) in Suzuki coupling reactions was investigated and both showed promise as supports in this application.

Suite à la première thèse sur le greffage et l’adsorption physique successives de sélecteurs chiraux dans des tubes ouverts en électrochromatographie capillaire (ECC ou CEC) chirale, menée par le Dr Guillaume Pédéhontaa-Hiaa au sein de l’équipe du laboratoire COBRA (IUT d’Evreux), nous avons développé des phases stationnaires chirales covalentes (CSPs) à base de cyclodextrines (CDs) en tubes ouverts et des CSPs sur supports monolithiques pour l’emploi en CEC. Nous avons ainsi évalué les paramètres électrochromatographiques et la stabilité de ces CSPs en séparant une variété de racémiques neutres et chargés. L’influence de la température d’analyse, le potentiel appliqué ainsi que la nature et le pH des électrolytes sur la qualité des électrochromatogrammes ont été étudié en CEC chirale. Cette étude se divise en deux grandes parties. La première concerne les CSPs élaborées sur colonnes à tubes ouverts pour l’OT-CEC. Il s’agit initialement de graver la surface interne d’un capillaire de silice de 50 μm de diamètre interne à l’aide d’une solution de bifluorure d’ammonium dans le but premier d’augmenter considérablement sa surface spécifique et d’immobiliser en surface une grande quantité de sélecteurs chiraux à base de β-CD. Nous avons alors décrit des greffages covalents de CDs anioniques (Scc-β-CD et CM-β-CD) et d’un polymère anionique de CDs (p-CM-β-CD-) en surface de capillaire de gel de silice gravée et modifiée chimiquement par l’aminopropyltriéthoxysilane (APTEOS). Les greffages des sélecteurs ont été reproduits dans les mêmes conditions que dans la thèse rapportée précédemment en électrophorèse. L’originalité de la construction de ces CSPs réside dans la rapidité et la simplicité du couplage dit péptidique à température ambiante, des sélecteurs carboxylés sur des colonnes préalablement gravées. Ce greffage nécessite des agents de couplage peptidique solubles dans l’eau tels que 1-Ethyl-3-(diméthylaminopropyl)carbodiimide (EDC) et le N-Hydroxysuccinimide (NHS). Il peut aussi être obtenu de manière moins efficace avec d’autres agents solubles en milieu organique tels que le O-(Benzotriazol-1-yl)-N,N,N’,N’-tétraméthyluronium tétrafluoroborate et la triéthylamine (TBTU/TEA). Chaque étape menant aux CSPs a été caractérisée par une étude de flux électroosmotique (FEO) en OT-CEC. Des analyses en AFM et en MEB nous renseignent d’avantage sur le succès du procédé « etching » de nos capillaires. La deuxième grande partie de cette étude traite de la synthèse in-situ de CSPs sur des colonnes de type polymères monolithes organiques et un monolithe hybride à base de sol gel. Des post modifications de surface de ces supports monolithiques nous ont permis d’immobiliser de façon covalente et non covalente des sélecteurs de β-CD en surface des volumes macroporeux. Deux collaborations ont vu le jour pour atteindre ces objectifs. La première eut lieu avec le Dr Thuy Tran et le Pr Myriam Taverna de la Faculté de Pharmacie de Chatenay Malabry (UMR 8612), durant laquelle nous avons reproduit une colonne monolithe organique de type méthacrylate, porteuse de groupements phosphate dans l’optique d’adsorber physiquement en surface le polymère cationique de CDs (p-CD+) que nous a transféré le Pr Benjamin Carbonnier et d’évaluer les capacités de discrimination chirale de cette nouvelle CSP en m-CEC. La seconde collaboration a eu lieu avec le Dr Mohamed Guerrouache et le Pr Benjamin Carbonnier au sein du laboratoire ICMPE de Thiais, où nous avons synthétisé des colonnes monolithiques organiques à base d’acrylates dans le but de greffer en surface de façon covalente et non covalente les CDs et polymères de CDs et d’évaluer ces nouvelles CSPs en m-CEC. La troisième phase stationnaire monolithique employée est celle décrite par le Dr Huihui Yang qui décrit un monolithe hybride porteur de groupements sulfonates nous permettant par la suite d’immobiliser électrostatiquement le p-CD+ sur le réseau poreux et d’évaluer cette nouvelle CSP en m-CEC
New chiral stationary phases have been prepared for Open Tubular and monolithic columns used in electrochromatography capillary. In order to separate racemic mixtures such as flavonoïd, Hidantoïn derivatives, Binaphtalene-2, 2-hydrogenophosphate and others chiral solutes, we use the β-cyclodextrin forms as chiral selector. Besides, β-cyclodextrin seems to be the most efficient chiral selector in chromatography since it is able to complex and dissolve optical organic isomers in an aqueous media, this chiral selector is able to dissolve even lipophilic molecule with high weight. The complexation is based on interactions with β-cyclodextrin. This study aims to elaborate new chiral stationary phase for CEC using β-cyclodextrin polymers and β-cyclodextrin derivatives. Two approaches were used: Firstly, covalent stationary phases coating with carboxymethyl-β-cyclodextrin polymers and oligomers containing carboxyl’s group had been experimented for open tubular and monolithic column in CEC. Then a non-covalent coating cationic polymer of β-cyclodextrin’s derivatives was immobilized (polytrimethyl ammonium β-CD) on continuous organic monoliths bearing anionic’s group. Prior to the covalent coating of the CD’s chiral selector for OT-CEC and m-CEC, we needed to modify the silicate surface and the monolithic surface with a primary amine silicate1,2 (aminopropyltriethoxysilane) and EDA, an amino-organic moiety (Ethylene diamine). The stability of the bonded organic moiety (APTEOS, EDA) were studied by CEC at different pH with constant ionic strength’s buffer. In this way, graft of carboxymethyl-β-cyclodextrin polymer on silica inner surface modified by APTEOS and on NAS-co-EDMA surface modified by EDA succeeded in activating and covalently coupling reagent as EDC and NHS (1-ethyl-3(-3-dimethtylaminopropyl) carbodiimide and N-hydroxysuccinimide, respectively3) with carboxymethyl’s group of carboxymethyl-β-cyclodextrin . The resultant stationary phase lead to stable chiral stationary phases, easier to prepare starting by coupling the selector to the amine’s group using EDC and NHS. In order to optimize enantio-separations by increasing the specific surface of open tubular columns, we reproduce the etching process to bared capillaries with ammonium bifluoride solution, referred to Pesek’s process4. By this mean, we increase dramatically the specific surface of bared capillaries before anchoring CDs polymers to silicate surfaces modified by APTEOS. Finally due to etching process, we obtain a covalent bonded Chiral Stationary Phase (CSP) which led to more efficient and resolvent enantio-separations by CEC. To describe, in another way, the non-covalent coating of CSP, we immobilised a cationic polymer (polytrimethyl ammonium β-CD+) on two kind of continuous organic and silica hybrid monoliths bearing sulfonate5 and phosphate’s groups. Based on precedent results for OT-CEC enantio-separation with LbL stationary phase7, using successive layers charged polymers to separate racemic mixture in CEC, we decided to adsorb a polycationic polymer hydrosoluble onto the silica hybrid monolith column to form chiral stationary phase (CSP) polytrimethyl ammonium β-cyclodextrin. This way of modification for monolithic surface by chiral selectors is nowadays highly efficient and attractive for CEC. The effect of the matrix and the coating’s nature are discussed by comparing the chromatographic parameters

The research described in this thesis is to develop and validate a process system model for an electrothermal swing adsorption (ESA) process that incorporates novel activated carbon monoliths (ACMs) for the recovery of volatile organic compounds (VOCs). The process system comprises two columns one dedicated for adsorption and the other for desorption and works in a cyclic mode of operation. Two mathematical models have been developed to describe the process system, namely in one dimension (1D) and in three dimensions (3D). The developed models have been validated using experimental data at the bench and the pilot scale, at different operating conditions and for two VOCs. It has been concluded that the 1D model was sufficient to represent the experimental data of the current study without going through the trouble of using the 3D model which was more demanding in terms of formulation and computation. The linear driving force approximation (LDF) approximation adequately predicted the concentration of VOCs in the gas phase with no need for a fundamental diffusion study within the solid of the ACMs. The kinetics of adsorption and desorption was governed by the mass transfer coefficient which was found by parameter estimation and was directly related to the internal mass transfer coefficient controlled mainly by molecular diffusion inside the pore structure of the ACMs.

Du fait du coût élevé de certains matériaux adsorbants d’intérêt pour le traitement de la micropollution organique, l’étude a porté sur la régénération de matériaux adsorbants de type zéolithes hydrophobes et monolithe de carbone dans le cas de l’adsorption du bisphénol A et du diclofénac comme micropolluants réfractaires. Des procédés d’oxydation avancée impliquant des espèces radicalaires HO• (réaction de Fenton, électro-Fenton) et SO₄• – (activation de persulfate par voie thermique) ont été utilisés pour assurer la régénération des matériaux par désorption et dégradation oxydative des polluants fixés. La production de radicaux HO• au sein de la phase aqueuse circulant au niveau de l’adsorbant n’est pas suffisamment efficace pour sa régénération. Il a donc été envisagé de générer les radicaux au plus près des molécules adsorbées. Au cours de ce travail, une méthode sensible d’analyse par polarographie de H₂O₂ a été développée et validée pour le suivi des expériences avec les procédés mettant en jeu la réaction de Fenton. Pour différentes zéolithes, le catalyseur de la réaction de Fenton à base de fer a été incorporé préalablement dans la zéolithe. Pour le monolithe de carbone, les propriétés de conduction du matériau ont été mises à profit en l’utilisant comme cathode pour l’application du procédé électro-Fenton permettant de produire les radicaux HO• directement au sein du matériau. Cela a conduit à améliorer les performances de la régénération avec toutefois une diminution de son efficacité au cours de cycles successifs adsorption/régénération
The elimination of organic micropollutants often requires the use of adsorption processes among the water treatments. The aim of our study is to regenerate two expensive materials (hydrophobic zeolites and carbon monoliths) to increase their life expectancy and decrease their investing cost. Two organic contaminants were targeted : diclofenac and bisphenol A, which are refractory pollutants. Advanced oxidation processes involve radical species, HO• (Fenton and electro-Fenton reactions) and SO₄• – (thermal activation of persulfate ion). These oxidants were used to decompose the adsorbed pollutants and thus regenerate the adsorbents. The HO• production, within the core of aqueous phase, did not reach satisfactory regeneration, and a loss of adsorption capacity was observed. Furthermore, during this study, a sensitive polarographic analytical method was developed and validated for the quantification of H₂O₂ in the aqueous phase. This method was used to follow in situ the Fenton reaction. The location of the catalyst in a closer vicinity of the adsorbed species was then optimized and the iron catalyst was impregnated in the host, prior to the adsorption, on different types of hydrophobic zeolites. Concerning carbon monolith, the electro-Fenton process was carried out using the material as the cathode thanks to its electrical conductivity. Consequently, HO• are produced in the porosity of monolith. This latter property enhanced the degradation of adsorbed solutes. The overall performances were increased compared to the homogeneous Fenton process. Nonetheless, a decrease of the adsorption capacities with adsorption-regeneration cycles was observed

[EN] The present PhD thesis is centred in the design (using concepts of supramolecular chemistry), synthesis and characterization of different hybrid organic-inorganic materials for boron removal from aqueous media. The interaction between boron and organic groups, polyols, used in the development of these new adsorbents is also studied. In the first part of the thesis it is presented a brief review of supramolecular chemistry concepts, chemistry of boron and also the main methods for boron removal (first chapter) and, also, the objectives of this thesis (second chapter). The third chapter exposes the results obtained by using a ceramic foam as macroscopic support for active materials for boron removal. This support is previously "impregnated" with an inorganic silica mesoporous material (UVM-7) and, in a second step, it is functionalized with an organic group with high boron affinity (gluconamide). This organic group, which works as an adsorbent, remains anchored to a macroscopic support, which will facilitate the use of these materials in industrial applications. Once the material is synthetized their boron adsorption and elimination abailability in aqueous media is studied and its ulterior reutilization. The fourth chapter of the PhD thesis is focused on the preparation of low cost materials for boron adsorption from water. In first place, it is used, as inorganic scaffolding, UVM-7 material, a mesoporous silica phase with a bimodal pore system. This material has a high boron adsorption capacity after its functionalization with the polyalcohol (as it is shown in the previous chapter) nevertheless, the reagents used in the synthesis tetraethylorthosilicate, as silica source, and hexadecyltrimethylammonium bromide, as templating agent are so expensive that they induce a high cost of final materials. In this chapter is presented as an alternative another materials which are able to perform as inorganic scaffolds: UVM-11 (surfactant-free mesoporous material), two silica xerogels with pores within the mesoporous range and comercial high surface area silica fume were prepared. Once all the materials are synthetized they are functionalized with gluconamides which are the active compounds for boron adsorption. Finally, a comparative study of the boron adsorption capacities in water is carried out. Low cost materials present comparable boron removal to those of higher cost and comercially abailable materials. Finally, in the fith chapter of this PhD thesis, the adsorption mechanism of boron on the active materials (based on UVM-7 as inorganic support) is studied using solid Nuclear Magnetic Resonance measures of 11B and 13C and using techniques as Magic Angle Sppining, crossed polarization and heteronuclear polarization disacoplament. To do that, a hybrid material composed by UVM-7 matrix grafted with gluconamide is prepared and then the solid is put in contact with different boron quantities. Final solids are characterized through 13C and 11B NMR, showing the formation of boronesters between gluconamide diol groups and boron adsorbed. When low boron concentration is used, bisquelate complexes are formed (B:glucosa = 1:2), however with higher concentrations monoquelate complexes are formed (B:glucosa = 1:1). This work was carried out in collaboration with the research group of "sol-gel materials and NMR", appertaining to the center of "Chimie de la matière condensée de Paris" of the "Université Pierre et Marie Curie".
[ES] La presente tesis doctoral está dedicada al diseño (empleando conceptos de química supramolecular), síntesis y caracterización de diferentes materiales híbridos orgánico-inorgánicos para la eliminación de boro en medios acuosos. También se ha procedido a estudiar detalladamente la interacción del boro con las agrupaciones orgánicas, polialcoholes, empleadas en el desarrollo de estos nuevos adsorbentes. En la primera parte de la tesis de presenta una introducción en la que se revisa los conceptos de química supramolecular, química del boro y los principales métodos de eliminación de boro (primer capítulo) y, también, se exponen los objetivos de la tesis (segundo capítulo). Ya en el tercer capítulo se exponen los resultados obtenidos empleando una esponja cerámica como soporte macroscópico para los materiales activos frente a la eliminación de boro. Este soporte se "impregnan" previamente con un material inorgánico silíceo mesoporoso (UVM-7) y, en una fase posterior, se funcionaliza con un grupo orgánico con alta afinidad hacia el boro (gluconamida). El grupo orgánico que funcionará como adsorbente queda así anclado a un soporte de tamaño macroscópico que facilitará la aplicación de estos materiales a gran escala. Una vez preparado y caracterizado se estudió la capacidad del material para adsorber y eliminar boro de medios acuosos y su posterior reutilización. En el cuarto capítulo de la tesis doctoral se aborda la preparación de materiales adsorbentes de bajo coste económico para la eliminación de boro en medios acuosos. En primer lugar se emplea, como soporte inorgánico, UVM-7 una sílice mesoporosa con un sistema bimodal de poros. Este material tiene una capacidad de adsorción de boro muy elevada una vez funcionalizado con el correspondiente polialcohol (tal y como se expone en el capítulo anterior) sin embargo los reactivos para su síntesis tetraetilortosilicato como fuente de sílice y bromuro de cetiltrimetilamonio como agente director de estructura son muy caros con lo que el material final presenta un elevado coste. En este capítulo se presenta como alternativa otros materiales que puedan actuar como soportes inorgánicos: UVM-11, material mesoporoso que no requiere de agente director de estructura en su síntesis, dos xerogeles con poros en el rango meso y una sílice comercial nanoparticulada de elevada superficie específica. Una vez sintetizados y caracterizados los cinco soportes se funcionalizaron con gluconamidas, que son los componentes activos frente a la adsorción de boro. Finalmente, se realiza un estudio comparativo de la capacidad de eliminación de boro de los cinco materiales preparados. Los materiales de bajo coste estudiados presentan una capacidad de eliminación de boro comparable a los materiales de mayor coste y a los materiales comercialmente disponibles. Por último, en el capítulo cinco de esta tesis doctoral, se aborda el estudio del mecanismo de adsorción del boro en los materiales activos preparados (basados en UVM-7 como soporte inorgánico) mediante medidas de resonancia magnética nuclear de sólidos, tanto de 13C como de 11B empleando las técnicas de rotación en ángulo mágico, polarización cruzada, y el desacoplamiento dipolar heteronuclear. Para ello se prepara un material híbrido formado por una matriz de UVM-7 funcionalizada con gluconamidas y este sólido se pone en contacto con diferentes cantidades de boro. Los sólidos finales se caracterizan mediante RMN de 13C y de 11B, observándose la formación de boroesteres entre los grupos diol de las gluconamidas ancladas y el boro adsorbido. Cuando la concentración de boro empleada es baja se forman complejos bisquelados (B:glucosa = 1:2) mientras que a concentraciones altas empiezan a formarse complejos monoquelados (B:glucosa = 1:1). Este trabajo se llevó a cabo en colaboración con el grupo de investigación de "Materiales sol-gel y RMN", perteneciente al centro "Chimie de la matiè
[CAT] La present tesi doctoral està dedicada al disseny (empleant conceptes de química supramolecular), síntesi i caracterització de diferents materials híbrids orgànico-inorgànics per a la el¿liminació de bor en medi aquòs. També s'ha precedit a estudiar detalladament la interacció del bor amb les agrupacions orgàniques, polialcohols, empreats en el desenvolupament d'aquestos nous adsorbents. En la primera part de la tesi es presenta una introducció en la que es revisen els conceptes de química supramolecular, química del bor i els principals mètodes de el¿liminació de bor (primer capítol) i, també, s'exposen els objectius de la tesi (segon capítol). Ja en el tercer capítol s'exposen els resultats obtinguts empreant una esponja ceràmica com a suport macroscòpic per als materials actius front a l'el¿liminació del bor. Aquest suport s'impregna prèviament amb un material inorgànic de sílice mesoporós (UVM-7) i, en una següent fase, es funcionalitza amb un grup orgànic amb alta afinitat cap al bor (gluconamida). El grup orgànic que funcionarà com a adsorbent queda aixina anclat a un suport de tamany macroscòpic que facil¿litarà l'aplicació d'aquestos materials a gran escala. Una vegada preparat i caracteritzat s'estudia la capacitat del material per a adsorber i el¿liminar bor en medi aquós i la seua posterior reutilització. Al quart capítol de la tesi doctoral s'aborda la preparació de materials adsorbents de baix cost econòmic per a l'eliminació de bor en medi aquòs. En primer lloc, s'empra, com a suport inorgànic, UVM-7 una sílice mesoporosa amb un sistema bimodal de porus. Aquest material té una capacitat d'adsorció molt elevadadeprés de la seua funcionalització amb el corresponent polialcohol (tal i com s'exposa al capítol anterior), no obstant això els reactius que s'utilitzen per a la seua síntesi tetraetilortosilicat com a font de sílice i bromur de cetiltrimetilamoni com agent director d'estructura són molt cars, per tant el material final presenta un elevat cost. En aquest capítol es presenta com alternativa altres materials que puguen actuar com a suports inorgànics: UVM-11, material mesoporòs que no requereix d'agent director d'estructura durant la seua síntesi, dos xerogels en porus en el rang meso i una sílice comercial nanoparticulada amb elevada superficie específica. Una vegada sintetitzats i caracteritzats els cinc suports es funcionalitzen en gluconamides, que són els components actius front a la adsorció de bor. Finalment, es realitza un estudi comparatiu de la capacitat d'el¿liminació de bor dels cinc materials preparats. Els materials de baix cost estudiats presenten una capacitat de eliminació de bor semblant als materials de major cost i als materials comercialment disponibles. Per últim, al capítol cinc d'aquesta tesi doctoral, s'aborda l'estudi del mecanisme d'adsorció de bor als materials actius preparats (basats en UVM-7 com a suport inorgànic) mitjançant medides de resonància magnética nuclear de sólids, tant de 13C com de 11B emprant tècniques de rotació en àngul màgic, polarització creuada, i el desacoplament dipolar heteronuclear. Per a ell es prepara un material híbrid format per una matriu de UVM-7 funcionalitzada amb gluconamides i aquest sòlid es posa en contacte amb diferents quantitats de bor. Els sòlids finals es caracteritzen mitjançant RMN de 13C i de 11B observant-se la formació de borésters entre els grups diol de les gluconamides anclades i el bor adsorbit. Quan la concentració de bor emprada és baixa es formen complexos bisquelats (B:glucosa = 1:2) mentre que a concentracions més altes comencen a formar-se complexos monoquelats (B:glucosa = 1:1). Aquest treball és va realitzar ne col¿laboració amb el grup d'investigació de "Materials sol-gel i RMN", perteneixent al centre "Chimie de la matière condensée de Paris" de la "Université Pierre et Marie Curie".
Sanfeliu Cano, C. (2016). Organic-inorganic hybrid materials for boron removal from aqueous media [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/63277
TESIS

In evolutionary biology, there is a mode of thinking which is quite common, and philosophically significant. This is ‘agential thinking’. In its paradigm case, agential thinking involves treating an evolved organism as if it were an agent pursuing a goal, such as survival and reproduction, and treating its phenotypic traits, including its behaviours, as strategies for achieving this goal. Less commonly, the entities that are treated as agent-like are genes or groups, rather than individual organisms. Agential thinking is related to the familiar Darwinian point that organisms’ evolved traits are often adaptive, but it goes beyond this. For it involves deliberately transposing a set of concepts—goals, interests, strategies—whose original application is to rational human agents, to the biological world at large. There are two possible attitudes towards agential thinking in biology. The first sees it as mere anthropomorphism, an instance of the psychological bias which leads humans to see intention and purpose in places where they do not exist. The second sees agential thinking as a natural and justifiable way of describing or reasoning about Darwinian evolution and its products. The truth turns out to lie in between these extremes, for agential thinking is not a monolithic whole. Some forms of agential thinking are problematic, but others admit of a solid justification, and when used carefully, can be a source of insight.

An electrokinetic micro-pump fabricated by a sol-gel process has been designed which can be used as a robust fluid-driving unit on a chip-scale analytical system. An overall monolithic silica matrix with morphology of micron-scaled through pores was formed within 100-μm inner diameter fused silica capillary. This pump utilizes electroosmotic flow to propel liquid solution with no moving parts. The Nafion® house design in the cathode chamber separates the electrolytic bubble interference from flow channels. The maximum flow rate and maximum pressure generated by the pump are 3.0 μL/min and 3.5 atm, respectively, at 6 kV. The flow rate can be controlled in the range 200 nL-3.0 μL/min by adjusting applied electric filed. As the monolith is silica-based, this pump can be used for a variety of fluids, especially for organic solvents such as acetonitrile and methanol, without swelling and shrinking problems. These results indicate that the pump can provide sufficient pressure and flow for micro-total-analysis systems (μTAS).

The use of oxidation catalytic converters (OCC) in Diesel engines has proved to be an effective method to reduce emissions of total hydrocarbons (THC), carbon monoxide (CO), and the soluble organic fractions (SOF) of particulate matter (PM). However, the exothermal reaction effected by the oxidation of THC, CO, and especially the soot accumulated in the converters impose a risk of catalytic flow bed overheating that subsequently results in catalyst failure and may cause safety concerns. This paper presents a one-dimensional transient model that uses an energy balance method to analyze the overheating scenario when considering combustible gas reaction, clogged soot burning, and active flow control for a number of Diesel aftertreatment devices. The monolith temperature profiles were simulated by varying the exhaust gas temperature, oxygen concentration, and flow rate. Simulation results indicated that the potential of overheating elevates with increases in combustible gas concentration, soot loading, oxygen concentration, and engine exhaust temperature. The impacts of active control, such as flow reversal control, on converter overheating have also been investigated therein.

We introduce the successful fabrication of inorganic polymer derived microchannels with organic solvent resistance and optical transparency, via economic micro-molding process by using two types of source materials: commercial polyvinylsilazane (HTT1800 Kion Corp.), or allylhydropolycarbosilane (SMP-10, Starfire Co.). And we demonstrated the reliable microchemical performance in various organic solvents such as THF, DMF and acetonitrile at elevated temperatures. Knovenagel and Diels-Alder reactions were successfully run by pressured-driven flow in 2 cm and 16 cm long channel, respectively. It is proven that the developed inorganic polymer-based microchannels were obviously performed as a niche material-based microfluidic device between plastic and glass based device. In addition, we present the fabrication and characterization of ceramic microreactors composed of inverted beaded silicon carbide (SiC) monoliths with interconnected pores as catalyst supports, integrated within high-density alumina housings obtained via an optimized gel-casting procedure. These tailored macroporous SiC monoliths deposited Ru as a catalyst was run for the decomposition of ammonia with at temperatures between 450 and 1000 °C, which demonstrated a high temperature fuel cell reformer.